blob: 430ae84ce528dd99545b061929928233950dc845 [file] [log] [blame]
/*
Mantis VP-1034 driver
Copyright (C) Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <asm/io.h>
#include "dmxdev.h"
#include "dvbdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "mb86a16.h"
#include "mantis_common.h"
#include "mantis_ioc.h"
#include "mantis_dvb.h"
#include "mantis_vp1034.h"
#include "mantis_reg.h"
struct mb86a16_config vp1034_mb86a16_config = {
.demod_address = 0x08,
.set_voltage = vp1034_set_voltage,
};
#define MANTIS_MODEL_NAME "VP-1034"
#define MANTIS_DEV_TYPE "DVB-S/DSS"
int vp1034_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct mantis_pci *mantis = fe->dvb->priv;
switch (voltage) {
case SEC_VOLTAGE_13:
dprintk(MANTIS_ERROR, 1, "Polarization=[13V]");
mantis_gpio_set_bits(mantis, 13, 1);
mantis_gpio_set_bits(mantis, 14, 0);
break;
case SEC_VOLTAGE_18:
dprintk(MANTIS_ERROR, 1, "Polarization=[18V]");
mantis_gpio_set_bits(mantis, 13, 1);
mantis_gpio_set_bits(mantis, 14, 1);
break;
case SEC_VOLTAGE_OFF:
dprintk(MANTIS_ERROR, 1, "Frontend (dummy) POWERDOWN");
break;
default:
dprintk(MANTIS_ERROR, 1, "Invalid = (%d)", (u32) voltage);
return -EINVAL;
}
mmwrite(0x00, MANTIS_GPIF_DOUT);
return 0;
}
static int vp1034_frontend_init(struct mantis_pci *mantis, struct dvb_frontend *fe)
{
struct i2c_adapter *adapter = &mantis->adapter;
int err = 0;
err = mantis_frontend_power(mantis, POWER_ON);
if (err == 0) {
mantis_frontend_soft_reset(mantis);
msleep(250);
dprintk(MANTIS_ERROR, 1, "Probing for MB86A16 (DVB-S/DSS)");
fe = dvb_attach(mb86a16_attach, &vp1034_mb86a16_config, adapter);
if (fe) {
dprintk(MANTIS_ERROR, 1,
"found MB86A16 DVB-S/DSS frontend @0x%02x",
vp1034_mb86a16_config.demod_address);
} else {
return -1;
}
} else {
dprintk(MANTIS_ERROR, 1, "Frontend on <%s> POWER ON failed! <%d>",
adapter->name,
err);
return -EIO;
}
mantis->fe = fe;
dprintk(MANTIS_ERROR, 1, "Done!");
return 0;
}
struct mantis_hwconfig vp1034_config = {
.model_name = MANTIS_MODEL_NAME,
.dev_type = MANTIS_DEV_TYPE,
.ts_size = MANTIS_TS_204,
.baud_rate = MANTIS_BAUD_9600,
.parity = MANTIS_PARITY_NONE,
.bytes = 0,
.frontend_init = vp1034_frontend_init,
.power = GPIF_A12,
.reset = GPIF_A13,
};