blob: 5cb1d75f58685c93f7641fe064f0d6c370a2d743 [file] [log] [blame]
/*
* Universal Flash Storage Host controller PCI glue driver
*
* This code is based on drivers/scsi/ufs/ufshcd-pci.c
* Copyright (C) 2011-2013 Samsung India Software Operations
*
* Authors:
* Santosh Yaraganavi <santosh.sy@samsung.com>
* Vinayak Holikatti <h.vinayak@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* See the COPYING file in the top-level directory or visit
* <http://www.gnu.org/licenses/gpl-2.0.html>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* This program is provided "AS IS" and "WITH ALL FAULTS" and
* without warranty of any kind. You are solely responsible for
* determining the appropriateness of using and distributing
* the program and assume all risks associated with your exercise
* of rights with respect to the program, including but not limited
* to infringement of third party rights, the risks and costs of
* program errors, damage to or loss of data, programs or equipment,
* and unavailability or interruption of operations. Under no
* circumstances will the contributor of this Program be liable for
* any damages of any kind arising from your use or distribution of
* this program.
*/
#include "ufshcd.h"
#include <linux/pci.h>
#ifdef CONFIG_PM
/**
* ufshcd_pci_suspend - suspend power management function
* @pdev: pointer to PCI device handle
* @state: power state
*
* Returns -ENOSYS
*/
static int ufshcd_pci_suspend(struct pci_dev *pdev, pm_message_t state)
{
/*
* TODO:
* 1. Call ufshcd_suspend
* 2. Do bus specific power management
*/
return -ENOSYS;
}
/**
* ufshcd_pci_resume - resume power management function
* @pdev: pointer to PCI device handle
*
* Returns -ENOSYS
*/
static int ufshcd_pci_resume(struct pci_dev *pdev)
{
/*
* TODO:
* 1. Call ufshcd_resume.
* 2. Do bus specific wake up
*/
return -ENOSYS;
}
#endif /* CONFIG_PM */
/**
* ufshcd_pci_shutdown - main function to put the controller in reset state
* @pdev: pointer to PCI device handle
*/
static void ufshcd_pci_shutdown(struct pci_dev *pdev)
{
ufshcd_hba_stop((struct ufs_hba *)pci_get_drvdata(pdev));
}
/**
* ufshcd_pci_remove - de-allocate PCI/SCSI host and host memory space
* data structure memory
* @pdev - pointer to PCI handle
*/
static void ufshcd_pci_remove(struct pci_dev *pdev)
{
struct ufs_hba *hba = pci_get_drvdata(pdev);
disable_irq(pdev->irq);
free_irq(pdev->irq, hba);
ufshcd_remove(hba);
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
pci_clear_master(pdev);
pci_disable_device(pdev);
}
/**
* ufshcd_set_dma_mask - Set dma mask based on the controller
* addressing capability
* @pdev: PCI device structure
*
* Returns 0 for success, non-zero for failure
*/
static int ufshcd_set_dma_mask(struct pci_dev *pdev)
{
int err;
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
&& !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
return 0;
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
return err;
}
/**
* ufshcd_pci_probe - probe routine of the driver
* @pdev: pointer to PCI device handle
* @id: PCI device id
*
* Returns 0 on success, non-zero value on failure
*/
static int
ufshcd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct ufs_hba *hba;
void __iomem *mmio_base;
int err;
err = pci_enable_device(pdev);
if (err) {
dev_err(&pdev->dev, "pci_enable_device failed\n");
goto out_error;
}
pci_set_master(pdev);
err = pci_request_regions(pdev, UFSHCD);
if (err < 0) {
dev_err(&pdev->dev, "request regions failed\n");
goto out_disable;
}
mmio_base = pci_ioremap_bar(pdev, 0);
if (!mmio_base) {
dev_err(&pdev->dev, "memory map failed\n");
err = -ENOMEM;
goto out_release_regions;
}
err = ufshcd_set_dma_mask(pdev);
if (err) {
dev_err(&pdev->dev, "set dma mask failed\n");
goto out_iounmap;
}
err = ufshcd_init(&pdev->dev, &hba, mmio_base, pdev->irq);
if (err) {
dev_err(&pdev->dev, "Initialization failed\n");
goto out_iounmap;
}
pci_set_drvdata(pdev, hba);
return 0;
out_iounmap:
iounmap(mmio_base);
out_release_regions:
pci_release_regions(pdev);
out_disable:
pci_clear_master(pdev);
pci_disable_device(pdev);
out_error:
return err;
}
static DEFINE_PCI_DEVICE_TABLE(ufshcd_pci_tbl) = {
{ PCI_VENDOR_ID_SAMSUNG, 0xC00C, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, ufshcd_pci_tbl);
static struct pci_driver ufshcd_pci_driver = {
.name = UFSHCD,
.id_table = ufshcd_pci_tbl,
.probe = ufshcd_pci_probe,
.remove = ufshcd_pci_remove,
.shutdown = ufshcd_pci_shutdown,
#ifdef CONFIG_PM
.suspend = ufshcd_pci_suspend,
.resume = ufshcd_pci_resume,
#endif
};
module_pci_driver(ufshcd_pci_driver);
MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
MODULE_DESCRIPTION("UFS host controller PCI glue driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(UFSHCD_DRIVER_VERSION);