blob: 69c65eb8683fb01db49992a2d27936287570e062 [file] [log] [blame]
/*
* pci.c - DesignWare HS OTG Controller PCI driver
*
* Copyright (C) 2004-2013 Synopsys, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the above-listed copyright holders may not be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation; either version 2 of the License, or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Provides the initialization and cleanup entry points for the DWC_otg PCI
* driver
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ch11.h>
#include "core.h"
#include "hcd.h"
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_PRODUCT_ID_HAPS_HSOTG 0xabc0
static const char dwc2_driver_name[] = "dwc2";
static struct dwc2_core_params dwc2_module_params = {
.otg_cap = -1,
.otg_ver = -1,
.dma_enable = -1,
.dma_desc_enable = 0,
.speed = -1,
.enable_dynamic_fifo = -1,
.en_multiple_tx_fifo = -1,
.host_rx_fifo_size = 1024,
.host_nperio_tx_fifo_size = 256,
.host_perio_tx_fifo_size = 1024,
.max_transfer_size = 65535,
.max_packet_count = 511,
.host_channels = -1,
.phy_type = -1,
.phy_utmi_width = 16, /* 16 bits - NOT DETECTABLE */
.phy_ulpi_ddr = -1,
.phy_ulpi_ext_vbus = -1,
.i2c_enable = -1,
.ulpi_fs_ls = -1,
.host_support_fs_ls_low_power = -1,
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
.ahb_single = -1,
};
/**
* dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
* DWC_otg driver
*
* @dev: Bus device
*
* This routine is called, for example, when the rmmod command is executed. The
* device may or may not be electrically present. If it is present, the driver
* stops device processing. Any resources used on behalf of this device are
* freed.
*/
static void dwc2_driver_remove(struct pci_dev *dev)
{
struct dwc2_hsotg *hsotg = pci_get_drvdata(dev);
dev_dbg(&dev->dev, "%s(%p)\n", __func__, dev);
dwc2_hcd_remove(hsotg);
pci_disable_device(dev);
}
/**
* dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
* driver
*
* @dev: Bus device
*
* This routine creates the driver components required to control the device
* (core, HCD, and PCD) and initializes the device. The driver components are
* stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
* in the device private data. This allows the driver to access the dwc2_hsotg
* structure on subsequent calls to driver methods for this device.
*/
static int dwc2_driver_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct dwc2_hsotg *hsotg;
int retval;
dev_dbg(&dev->dev, "%s(%p)\n", __func__, dev);
hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
if (!hsotg)
return -ENOMEM;
pci_set_power_state(dev, PCI_D0);
hsotg->dev = &dev->dev;
hsotg->regs = devm_request_and_ioremap(&dev->dev, &dev->resource[0]);
if (!hsotg->regs)
return -ENOMEM;
dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
(unsigned long)pci_resource_start(dev, 0), hsotg->regs);
if (pci_enable_device(dev) < 0)
return -ENODEV;
pci_set_master(dev);
retval = dwc2_hcd_init(hsotg, dev->irq, &dwc2_module_params);
if (retval) {
pci_disable_device(dev);
return retval;
}
pci_set_drvdata(dev, hsotg);
dev_dbg(&dev->dev, "hsotg=%p\n", hsotg);
return retval;
}
static DEFINE_PCI_DEVICE_TABLE(dwc2_pci_ids) = {
{
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_PRODUCT_ID_HAPS_HSOTG),
},
{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, dwc2_pci_ids);
static struct pci_driver dwc2_pci_driver = {
.name = dwc2_driver_name,
.id_table = dwc2_pci_ids,
.probe = dwc2_driver_probe,
.remove = dwc2_driver_remove,
};
module_pci_driver(dwc2_pci_driver);
MODULE_DESCRIPTION("DESIGNWARE HS OTG PCI Bus Glue");
MODULE_AUTHOR("Synopsys, Inc.");
MODULE_LICENSE("Dual BSD/GPL");