blob: b1c9d573da052f5cdd74a6f4637e51cfffdebce5 [file] [log] [blame]
config SND_SOC_TEGRA
tristate "SoC Audio for the Tegra System-on-Chip"
depends on ARCH_TEGRA && TEGRA20_APB_DMA
select REGMAP_MMIO
select SND_SOC_GENERIC_DMAENGINE_PCM if TEGRA20_APB_DMA
help
Say Y or M here if you want support for SoC audio on Tegra.
config SND_SOC_TEGRA20_AC97
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
select SND_SOC_AC97_BUS
select SND_SOC_TEGRA20_DAS
help
Say Y or M if you want to add support for codecs attached to the
Tegra20 AC97 interface. You will also need to select the individual
machine drivers to support below.
config SND_SOC_TEGRA20_DAS
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
help
Say Y or M if you want to add support for the Tegra20 DAS module.
You will also need to select the individual machine drivers to
support below.
config SND_SOC_TEGRA20_I2S
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
select SND_SOC_TEGRA20_DAS
help
Say Y or M if you want to add support for codecs attached to the
Tegra20 I2S interface. You will also need to select the individual
machine drivers to support below.
config SND_SOC_TEGRA20_SPDIF
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
default m
help
Say Y or M if you want to add support for the Tegra20 SPDIF interface.
You will also need to select the individual machine drivers to support
below.
config SND_SOC_TEGRA30_AHUB
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
help
Say Y or M if you want to add support for the Tegra20 AHUB module.
You will also need to select the individual machine drivers to
support below.
config SND_SOC_TEGRA30_I2S
tristate
depends on SND_SOC_TEGRA && ARCH_TEGRA_3x_SOC
select SND_SOC_TEGRA30_AHUB
help
Say Y or M if you want to add support for codecs attached to the
Tegra30 I2S interface. You will also need to select the individual
machine drivers to support below.
config SND_SOC_TEGRA_WM8753
tristate "SoC Audio support for Tegra boards using a WM8753 codec"
depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_WM8753
help
Say Y or M here if you want to add support for SoC audio on Tegra
boards using the WM8753 codec, such as Whistler.
config SND_SOC_TEGRA_WM8903
tristate "SoC Audio support for Tegra boards using a WM8903 codec"
depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TEGRA30_I2S if ARCH_TEGRA_3x_SOC
select SND_SOC_WM8903
help
Say Y or M here if you want to add support for SoC audio on Tegra
boards using the WM8093 codec. Currently, the supported boards are
Harmony, Ventana, Seaboard, Kaen, and Aebl.
config SND_SOC_TEGRA_WM9712
tristate "SoC Audio support for Tegra boards using a WM9712 codec"
depends on SND_SOC_TEGRA && ARCH_TEGRA_2x_SOC
select SND_SOC_TEGRA20_AC97
select SND_SOC_WM9712
help
Say Y or M here if you want to add support for SoC audio on Tegra
boards using the WM9712 (or compatible) codec.
config SND_SOC_TEGRA_TRIMSLICE
tristate "SoC Audio support for TrimSlice board"
depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_TLV320AIC23
help
Say Y or M here if you want to add support for SoC audio on the
TrimSlice platform.
config SND_SOC_TEGRA_ALC5632
tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
depends on SND_SOC_TEGRA && I2C
select SND_SOC_TEGRA20_I2S if ARCH_TEGRA_2x_SOC
select SND_SOC_ALC5632
help
Say Y or M here if you want to add support for SoC audio on the
Toshiba AC100 netbook.