Project import
diff --git a/libgpg-error-1.10/Makefile b/libgpg-error-1.10/Makefile
new file mode 100644
index 0000000..54c751c
--- /dev/null
+++ b/libgpg-error-1.10/Makefile
@@ -0,0 +1,128 @@
+#
+#    Copyright (c) 2010-2011 Nest, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest.
+#
+#    Description:
+#      This file is the make file for libgpg-error, a small library
+#      with error codes and descriptions shared by most GnuPG-related
+#      software.
+#
+
+BuildConfigSpecialized	:= No
+BuildProductSpecialized	:= No
+
+include pre.mak
+
+PackageName		:= libgpg-error
+
+PackageExtension	:= tar.bz2
+PackageSeparator	:= -
+
+PackagePatchArgs	:= -p1
+
+PackageArchive		:= $(PackageName).$(PackageExtension)
+PackageSourceDir	:= $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile	= $(call GenerateBuildPaths,Makefile)
+
+LicenseSourceFiles	:= COPYING COPYING.LIB
+LicenseSourcePaths      := $(addprefix $(PackageSourceDir)/,$(LicenseSourceFiles))
+
+CleanPaths		+= $(PackageLicenseFile)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(LicenseSourcePaths): source
+
+$(PackageLicenseFile): $(LicenseSourcePaths)
+	$(Verbose)touch $@
+	$(Verbose)for file in $(LicenseSourcePaths); do	\
+		echo "Concatenating \"$${file}\"...";	\
+		cat $${file} >> $@;			\
+	done
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+	$(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory) $(ResultDirectory)
+	$(Verbose)cd $(BuildDirectory) && \
+	$(CURDIR)/$(PackageSourceDir)/configure \
+	CC=$(CC) CXX=$(CXX) AR=$(AR) NM=$(NM) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+	--build=$(HostTuple) \
+	--host=$(TargetTuple) \
+	--prefix=/usr \
+	--sysconfdir=/etc \
+	--localstatedir=/var
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) -C $(BuildDirectory) \
+	all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libfoo.la' because some packages that depend on
+# these libraries use libtool. If libtool finds a 'libfoo.la' file for
+# a library, it uses the value of 'libdir=<dir>' it finds. In our
+# case, since '--prefix=/usr' this value is '/usr/lib'. It then
+# resolves '-lfoo'. In a cross-compilation environment, this is likely
+# to be neither the right architecture nor the right version to link
+# against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) -C $(BuildDirectory) \
+	DESTDIR=$(ResultDirectory) \
+	install
+	$(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libgpg-error.la)
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/libgpg-error-1.10/libgpg-error.tar.bz2 b/libgpg-error-1.10/libgpg-error.tar.bz2
new file mode 100644
index 0000000..d8aab4b
--- /dev/null
+++ b/libgpg-error-1.10/libgpg-error.tar.bz2
Binary files differ
diff --git a/libgpg-error-1.10/libgpg-error.url b/libgpg-error-1.10/libgpg-error.url
new file mode 100644
index 0000000..193e93e
--- /dev/null
+++ b/libgpg-error-1.10/libgpg-error.url
@@ -0,0 +1 @@
+ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2
diff --git a/libgpg-error-1.10/libgpg-error.version b/libgpg-error-1.10/libgpg-error.version
new file mode 100644
index 0000000..c044b1a
--- /dev/null
+++ b/libgpg-error-1.10/libgpg-error.version
@@ -0,0 +1 @@
+1.10