Project import
diff --git a/dbus-1.4.10/Makefile b/dbus-1.4.10/Makefile
new file mode 100644
index 0000000..3d1da8c
--- /dev/null
+++ b/dbus-1.4.10/Makefile
@@ -0,0 +1,132 @@
+#
+# Copyright (c) 2010-2011 Nest, Inc.
+# All rights reserved.
+#
+# This document is the property of Nest. It is considered
+# confidential and proprietary information.
+#
+# This document may not be reproduced or transmitted in any form,
+# in whole or in part, without the express written permission of
+# Nest.
+#
+# Description:
+# This file is the make file for dbus, a message bus system for
+# interprocess communication.
+#
+
+BuildConfigSpecialized := No
+BuildProductSpecialized := No
+
+include pre.mak
+
+PackageName := dbus
+
+PackageExtension := tar.gz
+PackageSeparator := -
+
+PackagePatchArgs :=
+
+PackageArchive := $(PackageName).$(PackageExtension)
+PackageSourceDir := $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile = $(call GenerateBuildPaths,Makefile)
+
+CleanPaths += $(PackageLicenseFile)
+
+ExpatDir := sw/tps/expat
+ExpatIncDir = $(call GenerateResultPaths,$(ExpatDir),usr/include)
+ExpatLibDir = $(call GenerateResultPaths,$(ExpatDir),usr/lib)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/COPYING: source
+
+$(PackageLicenseFile): $(PackageSourceDir)/COPYING
+ $(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+ $(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+#
+# The configure script cannot determine several features when
+# cross-compiling, so we give it direct cached answers for the
+# GNU/Linux systems we are concerned with.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory) $(ResultDirectory)
+ $(Verbose)cd $(BuildDirectory) && \
+ $(CURDIR)/$(PackageSourceDir)/configure \
+ CC=$(CC) CXX=$(CXX) AR=$(AR) NM=$(NM) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+ CPPFLAGS="-I$(ExpatIncDir)" \
+ LDFLAGS="-L$(ExpatLibDir)" \
+ --build=$(HostTuple) \
+ --host=$(TargetTuple) \
+ ac_cv_have_abstract_sockets=yes \
+ --disable-selinux \
+ --enable-abstract-sockets \
+ --enable-asserts \
+ --without-x \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --localstatedir=/var
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) -C $(BuildDirectory) all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libfoo.la' because some packages that depend on
+# these libraries use libtool. If libtool finds a 'libfoo.la' file for
+# a library, it uses the value of 'libdir=<dir>' it finds. In our
+# case, since '--prefix=/usr' this value is '/usr/lib'. It then
+# resolves '-lfoo'. In a cross-compilation environment, this is likely
+# to be neither the right architecture nor the right version to link
+# against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) -C $(BuildDirectory) DESTDIR=$(ResultDirectory) install
+ $(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libdbus-1.la)
+
+clean:
+ $(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/dbus-1.4.10/dbus.tar.gz b/dbus-1.4.10/dbus.tar.gz
new file mode 100644
index 0000000..8d41de0
--- /dev/null
+++ b/dbus-1.4.10/dbus.tar.gz
Binary files differ
diff --git a/dbus-1.4.10/dbus.url b/dbus-1.4.10/dbus.url
new file mode 100644
index 0000000..eb5adf7
--- /dev/null
+++ b/dbus-1.4.10/dbus.url
@@ -0,0 +1 @@
+http://dbus.freedesktop.org/releases/dbus/dbus-1.4.10.tar.gz
diff --git a/dbus-1.4.10/dbus.version b/dbus-1.4.10/dbus.version
new file mode 100644
index 0000000..ac9f79c
--- /dev/null
+++ b/dbus-1.4.10/dbus.version
@@ -0,0 +1 @@
+1.4.10
