Project import
diff --git a/avahi-0.6.28/Makefile b/avahi-0.6.28/Makefile
new file mode 100644
index 0000000..8ec80fc
--- /dev/null
+++ b/avahi-0.6.28/Makefile
@@ -0,0 +1,175 @@
+#
+# Copyright (c) 2010-2011 Nest, Inc.
+# All rights reserved.
+#
+# This document is the property of Nest. It is considered
+# confidential and proprietary information.
+#
+# This document may not be reproduced or transmitted in any form,
+# in whole or in part, without the express written permission of
+# Nest.
+#
+# Description:
+# This file is the makefile for the Avahi ZeroConf (aka Bonjour)
+# multicast DNS (mDNS) Service Discovery (SD) software.
+#
+
+BuildConfigSpecialized := No
+BuildProductSpecialized := No
+
+include pre.mak
+
+PackageName := avahi
+
+PackageExtension := tar.gz
+PackageSeparator := -
+
+PackagePatchArgs := -p1
+
+PackageArchive := $(PackageName).$(PackageExtension)
+PackageSourceDir := $(PackageName)$(PackageSeparator)$(PackageVersion)/
+
+PackageBuildMakefile = $(call GenerateBuildPaths,Makefile)
+
+CleanPaths += $(PackageLicenseFile)
+
+DbusDir := sw/tps/dbus
+DbusIncDir := $(call GenerateResultPaths,$(DbusDir),usr/include/dbus-1.0)
+DbusArchIncDir := $(call GenerateResultPaths,$(DbusDir),usr/lib/dbus-1.0/include)
+DbusLibDir := $(call GenerateResultPaths,$(DbusDir),usr/lib)
+
+ExpatDir := sw/tps/expat
+ExpatIncDir = $(call GenerateResultPaths,$(ExpatDir),usr/include)
+ExpatLibDir = $(call GenerateResultPaths,$(ExpatDir),usr/lib)
+
+LibCapDir := sw/tps/libcap
+LibCapIncDir = $(call GenerateResultPaths,$(LibCapDir),usr/include)
+LibCapLibDir = $(call GenerateResultPaths,$(LibCapDir),lib)
+
+LibDaemonDir := sw/tps/libdaemon
+LibDaemonIncDir = $(call GenerateResultPaths,$(LibDaemonDir),usr/include)
+LibDaemonLibDir = $(call GenerateResultPaths,$(LibDaemonDir),usr/lib)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/LICENSE: source
+
+$(PackageLicenseFile): $(PackageSourceDir)/LICENSE
+ $(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+ $(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory)
+ $(Verbose)cd $(BuildDirectory) && \
+ $(CURDIR)/$(PackageSourceDir)/configure \
+ CC=$(CC) CXX=$(CXX) AR=$(AR) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+ CPPFLAGS="-I$(ExpatIncDir) -I$(LibCapIncDir)" \
+ LDFLAGS="-L$(ExpatLibDir) -L$(LibCapLibDir)" \
+ DBUS_CFLAGS="-I$(DbusIncDir) -I$(DbusArchIncDir)" \
+ DBUS_LIBS="-L$(DbusLibDir) -ldbus-1" \
+ DBUS_VERSION=$(shell cat $(BuildRoot)/$(DbusDir)/dbus.version) \
+ LIBDAEMON_CFLAGS="-I$(LibDaemonIncDir)" \
+ LIBDAEMON_LIBS="-L$(LibDaemonLibDir) -ldaemon" \
+ --build=$(HostTuple) \
+ --host=$(TargetTuple) \
+ --disable-gdbm \
+ --disable-glib \
+ --disable-gobject \
+ --disable-gtk \
+ --disable-gtk3 \
+ --disable-manpages \
+ --disable-mono \
+ --disable-monodoc \
+ --disable-python \
+ --disable-qt3 \
+ --disable-qt4 \
+ --enable-dbus \
+ --enable-libdaemon \
+ --with-distro=none \
+ --with-xml=expat \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --localstatedir=/var
+
+# Configure the source for building.
+#
+# Avahi uses and, in fact, requires pkg-config to set-up LDFLAGS and
+# CFLAGS for LIBDAEMON even though these are explicitly provided on
+# the configure command line above as prescribed in the "how to
+# configure WITHOUT pkg-config" instructions.
+#
+# Unfortunately, some site Linux systems are quite old and have a
+# version of pkg-config that avahi refuses to work with.
+# Consequently, we place $(HostBinDir) first in the path to ensure
+# that the project-local version of pkg-config is detected and used
+# rather than a host- or site-local version.
+
+configure: PATH := $(HostBinDir):$(PATH)
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) -C $(BuildDirectory) all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libavahi-core.la' and 'libavahi-common.la'
+# because some packages that depend on these libraries use libtool. If
+# libtool finds a '*.la' file for a library, it uses the value of
+# 'libdir=<dir>' it finds. In our case, since '--prefix=/usr' this
+# value is '/usr/lib'. It then resolves '-lavahi-core' or
+# '-lavahi-common' to '/usr/lib/libavahi-core.so' and
+# '/usr/lib/libavahi-common.so', respectively. In a cross-compilation
+# environment, this is likely to be neither the right architecture nor
+# the right version to link against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) -C $(BuildDirectory) DESTDIR=$(ResultDirectory) install
+ $(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libavahi-common.la usr/lib/libavahi-core.la usr/lib/libavahi-client.la)
+
+
+clean:
+ $(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
+
+
+
diff --git a/avahi-0.6.28/avahi.patches.tar.gz b/avahi-0.6.28/avahi.patches.tar.gz
new file mode 100644
index 0000000..97e1159
--- /dev/null
+++ b/avahi-0.6.28/avahi.patches.tar.gz
Binary files differ
diff --git a/avahi-0.6.28/avahi.tar.gz b/avahi-0.6.28/avahi.tar.gz
new file mode 100644
index 0000000..f9f5b2e
--- /dev/null
+++ b/avahi-0.6.28/avahi.tar.gz
Binary files differ
diff --git a/avahi-0.6.28/avahi.url b/avahi-0.6.28/avahi.url
new file mode 100644
index 0000000..73651b6
--- /dev/null
+++ b/avahi-0.6.28/avahi.url
@@ -0,0 +1 @@
+http://avahi.org/download/avahi-0.6.28.tar.gz
diff --git a/avahi-0.6.28/avahi.version b/avahi-0.6.28/avahi.version
new file mode 100644
index 0000000..9c4bb2c
--- /dev/null
+++ b/avahi-0.6.28/avahi.version
@@ -0,0 +1 @@
+0.6.28