Project import
diff --git a/x-loader-1.46_OMAPPSP_03.00.01.06/Makefile b/x-loader-1.46_OMAPPSP_03.00.01.06/Makefile
new file mode 100644
index 0000000..fa5a2a7
--- /dev/null
+++ b/x-loader-1.46_OMAPPSP_03.00.01.06/Makefile
@@ -0,0 +1,103 @@
+#
+#    Copyright (c) 2010 Nest Labs, Inc.
+#    All rights reserved.
+#
+#    This document is the property of Nest Labs. It is considered
+#    confidential and proprietary information.
+#
+#    This document may not be reproduced or transmitted in any form,
+#    in whole or in part, without the express written permission of
+#    Nest Labs.
+#
+#    Description:
+#      This file is the make file for X-Loader, an initial program
+#      loader (IPL) for embedded boards based on Texas Instruments
+#      OMAP processors.
+#
+
+include pre.mak
+
+PackageRoot		:= .
+
+PackageName		:= x-loader
+
+PackageSeparator	:= 
+
+PackageVersion		:= 
+PackageSourceDir	:= $(PackageRoot)/$(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile	= $(call GenerateBuildPaths,include/config.mk)
+
+CleanPaths		+= $(PackageLicenseFile)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/README: source
+
+$(PackageLicenseFile): $(PackageSourceDir)/README
+	$(Echo) "Extracting \"$(call GenerateBuildRootEllipsedPath,$(@))\""
+	$(Verbose)$(SED) -n -e '10,25p' < $< > $@
+
+# We are building this package from version-controller source, so
+# there is nothing to do for this target goal.
+
+$(PackageSourceDir):
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# X-Loader has no way of explicitly setting CC, LD, OBJCOPY, et al and
+# instead relies on the value of CROSS_COMPILE. Consequently, we have
+# to ensure that 'ToolBinDir' is in 'PATH' so that the kernel build
+# infrastructure can find $(CROSS_COMPILE)gcc, $(CROSS_COMPILE)ld, et al.
+
+configure build stage: PATH := $(PATH):$(ToolBinDir)
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory)
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) -C $(PackageSourceDir) O=$(CURDIR)/$(BuildDirectory) \
+	$(XLoaderProductionConfig)
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+
+.PHONY: build
+build: configure
+	$(Verbose)unset MAKEFLAGS && \
+	$(MAKE) -C $(PackageSourceDir) O=$(CURDIR)/$(BuildDirectory) \
+	all
+
+# Stage the build to a temporary installation area.
+#
+# X-Loader does not support a notion of installing, so we have to
+# cherry-pick the components we want from the build directory and
+# copy/install them to the results directory.
+
+.PHONY: stage
+stage: copy
+
+.PHONY: copy
+$(call GenerateResultPaths,fw/x-loader,x-load.bin) copy: build | $(ResultDirectory)
+	$(Verbose)cp -f $(wildcard $(call GenerateBuildPaths,x-load*)) $(ResultDirectory)
+	$(Verbose)cp -f $(call GenerateBuildPaths,System.map) $(ResultDirectory)
+
+clean:
+	$(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+	$(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/x-loader-1.46_OMAPPSP_03.00.01.06/x-loader.tar.gz b/x-loader-1.46_OMAPPSP_03.00.01.06/x-loader.tar.gz
new file mode 100644
index 0000000..f50c0c0
--- /dev/null
+++ b/x-loader-1.46_OMAPPSP_03.00.01.06/x-loader.tar.gz
Binary files differ
diff --git a/x-loader-1.46_OMAPPSP_03.00.01.06/x-loader.version b/x-loader-1.46_OMAPPSP_03.00.01.06/x-loader.version
new file mode 100644
index 0000000..dbf095b
--- /dev/null
+++ b/x-loader-1.46_OMAPPSP_03.00.01.06/x-loader.version
@@ -0,0 +1 @@
+1.46_OMAPPSP_03.00.01.06