| # Makefile.in generated by automake 1.9.6 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # Copyright (c) 1999-2001 by Red Hat, Inc. All rights reserved. |
| # |
| # THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED |
| # OR IMPLIED. ANY USE IS AT YOUR OWN RISK. |
| # |
| # Permission is hereby granted to use or copy this program |
| # for any purpose, provided the above notices are retained on all copies. |
| # Permission to modify the code and to distribute modified code is granted, |
| # provided the above notices are retained, and a notice that the code was |
| # modified is included with the above copyright notice. |
| # |
| # Original author: Tom Tromey |
| # Severely truncated by Hans-J. Boehm |
| # Modified by: Grzegorz Jakacki <jakacki at acm dot org> |
| # Modified by: Petter Urkedal <petter.urkedal@nordita.dk> (2005-04) |
| |
| # |
| # |
| # THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED |
| # OR IMPLIED. ANY USE IS AT YOUR OWN RISK. |
| # |
| # Permission is hereby granted to use or copy this program |
| # for any purpose, provided the above notices are retained on all copies. |
| # Permission to modify the code and to distribute modified code is granted, |
| # provided the above notices are retained, and a notice that the code was |
| # modified is included with the above copyright notice. |
| # |
| # Modified by: Grzegorz Jakacki <jakacki at acm dot org> |
| # Modified by: Petter Urkedal <petter.urkedal@nordita.dk> |
| |
| # |
| # |
| # THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED |
| # OR IMPLIED. ANY USE IS AT YOUR OWN RISK. |
| # |
| # Permission is hereby granted to use or copy this program |
| # for any purpose, provided the above notices are retained on all copies. |
| # Permission to modify the code and to distribute modified code is granted, |
| # provided the above notices are retained, and a notice that the code was |
| # modified is included with the above copyright notice. |
| |
| # |
| # |
| # THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED |
| # OR IMPLIED. ANY USE IS AT YOUR OWN RISK. |
| # |
| # Permission is hereby granted to use or copy this program |
| # for any purpose, provided the above notices are retained on all copies. |
| # Permission to modify the code and to distribute modified code is granted, |
| # provided the above notices are retained, and a notice that the code was |
| # modified is included with the above copyright notice. |
| # |
| # Modified by: Grzegorz Jakacki <jakacki at acm dot org> |
| # Modified by: Petter Urkedal <petter.urkedal@nordita.dk> |
| |
| |
| |
| |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| top_builddir = . |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| INSTALL = @INSTALL@ |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| check_PROGRAMS = gctest$(EXEEXT) leaktest$(EXEEXT) middletest$(EXEEXT) \ |
| $(am__EXEEXT_1) $(am__EXEEXT_2) |
| |
| # C Library: Architecture Dependent |
| # --------------------------------- |
| @PTHREADS_TRUE@am__append_1 = pthread_support.c pthread_stop_world.c |
| @DARWIN_THREADS_TRUE@am__append_2 = darwin_stop_world.c |
| @WIN32_THREADS_TRUE@am__append_3 = win32_threads.c |
| |
| # C++ Interface |
| # ------------- |
| @CPLUSPLUS_TRUE@am__append_4 = libgccpp.la |
| @CPLUSPLUS_TRUE@am__append_5 = include/gc_cpp.h include/gc_allocator.h |
| DIST_COMMON = $(am__configure_deps) $(am__pkginclude_HEADERS_DIST) \ |
| $(dist_noinst_HEADERS) $(dist_noinst_SCRIPTS) \ |
| $(dist_pkgconfig_DATA) $(dist_pkgdata_DATA) $(include_HEADERS) \ |
| $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ |
| $(srcdir)/bdw-gc.pc.in $(srcdir)/cord/cord.am \ |
| $(srcdir)/doc/doc.am $(srcdir)/include/include.am \ |
| $(srcdir)/tests/tests.am $(top_srcdir)/configure ChangeLog \ |
| compile config.guess config.sub depcomp install-sh ltmain.sh \ |
| missing mkinstalldirs |
| |
| #TESTS += tracetest$(EXEEXT) |
| #check_PROGRAMS += tracetest |
| #tracetest_SOURCES = tests/trace_test.c |
| #tracetest_LDADD = $(test_ldadd) |
| @THREADS_TRUE@am__append_6 = threadleaktest$(EXEEXT) |
| @THREADS_TRUE@am__append_7 = threadleaktest |
| @CPLUSPLUS_TRUE@am__append_8 = test_cpp$(EXEEXT) |
| @CPLUSPLUS_TRUE@am__append_9 = test_cpp |
| subdir = . |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ |
| $(top_srcdir)/libtool.m4 $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno configure.status.lineno |
| mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs |
| CONFIG_CLEAN_FILES = bdw-gc.pc |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" \ |
| "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(includedir)" \ |
| "$(DESTDIR)$(pkgincludedir)" |
| libLTLIBRARIES_INSTALL = $(INSTALL) |
| LTLIBRARIES = $(lib_LTLIBRARIES) |
| libcord_la_DEPENDENCIES = $(top_builddir)/libgc.la |
| am__dirstamp = $(am__leading_dot)dirstamp |
| am_libcord_la_OBJECTS = cord/cordbscs.lo cord/cordprnt.lo \ |
| cord/cordtest.lo cord/cordxtra.lo |
| libcord_la_OBJECTS = $(am_libcord_la_OBJECTS) |
| am__DEPENDENCIES_1 = |
| am__libgc_la_SOURCES_DIST = allchblk.c alloc.c blacklst.c checksums.c \ |
| dbg_mlc.c dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c \ |
| headers.c malloc.c mallocx.c mark.c mark_rts.c misc.c \ |
| new_hblk.c obj_map.c os_dep.c pcr_interface.c ptr_chck.c \ |
| real_malloc.c reclaim.c specific.c stubborn.c typd_mlc.c \ |
| backgraph.c thread_local_alloc.c pthread_support.c \ |
| pthread_stop_world.c darwin_stop_world.c win32_threads.c |
| @PTHREADS_TRUE@am__objects_1 = pthread_support.lo \ |
| @PTHREADS_TRUE@ pthread_stop_world.lo |
| @DARWIN_THREADS_TRUE@am__objects_2 = darwin_stop_world.lo |
| @WIN32_THREADS_TRUE@am__objects_3 = win32_threads.lo |
| am_libgc_la_OBJECTS = allchblk.lo alloc.lo blacklst.lo checksums.lo \ |
| dbg_mlc.lo dyn_load.lo finalize.lo gc_dlopen.lo gcj_mlc.lo \ |
| headers.lo malloc.lo mallocx.lo mark.lo mark_rts.lo misc.lo \ |
| new_hblk.lo obj_map.lo os_dep.lo pcr_interface.lo ptr_chck.lo \ |
| real_malloc.lo reclaim.lo specific.lo stubborn.lo typd_mlc.lo \ |
| backgraph.lo thread_local_alloc.lo $(am__objects_1) \ |
| $(am__objects_2) $(am__objects_3) |
| @NEED_ATOMIC_OPS_ASM_FALSE@@USE_INTERNAL_LIBATOMIC_OPS_TRUE@nodist_libgc_la_OBJECTS = atomic_ops.lo |
| @NEED_ATOMIC_OPS_ASM_TRUE@nodist_libgc_la_OBJECTS = \ |
| @NEED_ATOMIC_OPS_ASM_TRUE@ atomic_ops_sysdeps.lo |
| libgc_la_OBJECTS = $(am_libgc_la_OBJECTS) $(nodist_libgc_la_OBJECTS) |
| @CPLUSPLUS_TRUE@libgccpp_la_DEPENDENCIES = $(top_builddir)/libgc.la |
| am__libgccpp_la_SOURCES_DIST = gc_cpp.cc |
| @CPLUSPLUS_TRUE@am_libgccpp_la_OBJECTS = gc_cpp.lo |
| libgccpp_la_OBJECTS = $(am_libgccpp_la_OBJECTS) |
| @CPLUSPLUS_TRUE@am_libgccpp_la_rpath = -rpath $(libdir) |
| @THREADS_TRUE@am__EXEEXT_1 = threadleaktest$(EXEEXT) |
| @CPLUSPLUS_TRUE@am__EXEEXT_2 = test_cpp$(EXEEXT) |
| am_gctest_OBJECTS = tests/test.$(OBJEXT) |
| gctest_OBJECTS = $(am_gctest_OBJECTS) |
| am__DEPENDENCIES_2 = $(top_builddir)/libgc.la $(am__DEPENDENCIES_1) |
| am_leaktest_OBJECTS = tests/leak_test.$(OBJEXT) |
| leaktest_OBJECTS = $(am_leaktest_OBJECTS) |
| leaktest_DEPENDENCIES = $(am__DEPENDENCIES_2) |
| am_middletest_OBJECTS = tests/middle.$(OBJEXT) |
| middletest_OBJECTS = $(am_middletest_OBJECTS) |
| middletest_DEPENDENCIES = $(am__DEPENDENCIES_2) |
| am__test_cpp_SOURCES_DIST = tests/test_cpp.cc |
| @CPLUSPLUS_TRUE@am_test_cpp_OBJECTS = tests/test_cpp.$(OBJEXT) |
| test_cpp_OBJECTS = $(am_test_cpp_OBJECTS) |
| @CPLUSPLUS_TRUE@test_cpp_DEPENDENCIES = libgccpp.la \ |
| @CPLUSPLUS_TRUE@ $(am__DEPENDENCIES_2) |
| am__threadleaktest_SOURCES_DIST = tests/thread_leak_test.c |
| @THREADS_TRUE@am_threadleaktest_OBJECTS = \ |
| @THREADS_TRUE@ tests/thread_leak_test.$(OBJEXT) |
| threadleaktest_OBJECTS = $(am_threadleaktest_OBJECTS) |
| @THREADS_TRUE@threadleaktest_DEPENDENCIES = $(am__DEPENDENCIES_2) |
| SCRIPTS = $(dist_noinst_SCRIPTS) |
| DEFAULT_INCLUDES = |
| depcomp = $(SHELL) $(top_srcdir)/depcomp |
| am__depfiles_maybe = depfiles |
| CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS) |
| LTCCASCOMPILE = $(LIBTOOL) --mode=compile $(CCAS) $(AM_CCASFLAGS) \ |
| $(CCASFLAGS) |
| COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
| $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ |
| $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ |
| $(AM_CFLAGS) $(CFLAGS) |
| CCLD = $(CC) |
| LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ |
| $(AM_LDFLAGS) $(LDFLAGS) -o $@ |
| CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ |
| $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) |
| LTCXXCOMPILE = $(LIBTOOL) --tag=CXX --mode=compile $(CXX) $(DEFS) \ |
| $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ |
| $(AM_CXXFLAGS) $(CXXFLAGS) |
| CXXLD = $(CXX) |
| CXXLINK = $(LIBTOOL) --tag=CXX --mode=link $(CXXLD) $(AM_CXXFLAGS) \ |
| $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ |
| SOURCES = $(libcord_la_SOURCES) $(libgc_la_SOURCES) \ |
| $(EXTRA_libgc_la_SOURCES) $(nodist_libgc_la_SOURCES) \ |
| $(libgccpp_la_SOURCES) $(gctest_SOURCES) $(leaktest_SOURCES) \ |
| $(middletest_SOURCES) $(test_cpp_SOURCES) \ |
| $(threadleaktest_SOURCES) |
| DIST_SOURCES = $(libcord_la_SOURCES) $(am__libgc_la_SOURCES_DIST) \ |
| $(EXTRA_libgc_la_SOURCES) $(am__libgccpp_la_SOURCES_DIST) \ |
| $(gctest_SOURCES) $(leaktest_SOURCES) $(middletest_SOURCES) \ |
| $(am__test_cpp_SOURCES_DIST) \ |
| $(am__threadleaktest_SOURCES_DIST) |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-exec-recursive install-info-recursive \ |
| install-recursive installcheck-recursive installdirs-recursive \ |
| pdf-recursive ps-recursive uninstall-info-recursive \ |
| uninstall-recursive |
| dist_pkgconfigDATA_INSTALL = $(INSTALL_DATA) |
| dist_pkgdataDATA_INSTALL = $(INSTALL_DATA) |
| DATA = $(dist_pkgconfig_DATA) $(dist_pkgdata_DATA) |
| includeHEADERS_INSTALL = $(INSTALL_HEADER) |
| am__pkginclude_HEADERS_DIST = include/gc_cpp.h include/gc_allocator.h \ |
| include/gc.h include/gc_typed.h include/gc_inline.h \ |
| include/gc_mark.h include/weakpointer.h include/new_gc_alloc.h \ |
| include/gc_backptr.h include/gc_gcj.h include/leak_detector.h \ |
| include/gc_amiga_redirects.h include/gc_pthread_redirects.h \ |
| include/gc_config_macros.h include/gc_tiny_fl.h |
| pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER) |
| HEADERS = $(dist_noinst_HEADERS) $(include_HEADERS) \ |
| $(pkginclude_HEADERS) |
| ETAGS = etags |
| CTAGS = ctags |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| { test ! -d $(distdir) \ |
| || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -fr $(distdir); }; } |
| DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 |
| GZIP_ENV = --best |
| distuninstallcheck_listfiles = find . -type f -print |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = @ACLOCAL@ |
| AMDEP_FALSE = @AMDEP_FALSE@ |
| AMDEP_TRUE = @AMDEP_TRUE@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCAS = @CCAS@ |
| CCASFLAGS = @CCASFLAGS@ $(DEFS) |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| COMPILER_XLC_FALSE = @COMPILER_XLC_FALSE@ |
| COMPILER_XLC_TRUE = @COMPILER_XLC_TRUE@ |
| CPLUSPLUS_FALSE = @CPLUSPLUS_FALSE@ |
| CPLUSPLUS_TRUE = @CPLUSPLUS_TRUE@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CXX = @CXX@ |
| CXXCPP = @CXXCPP@ |
| CXXDEPMODE = @CXXDEPMODE@ |
| CXXFLAGS = @CXXFLAGS@ |
| CXXINCLUDES = @CXXINCLUDES@ |
| CYGPATH_W = @CYGPATH_W@ |
| DARWIN_THREADS_FALSE = @DARWIN_THREADS_FALSE@ |
| DARWIN_THREADS_TRUE = @DARWIN_THREADS_TRUE@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| ECHO = @ECHO@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| ENABLE_GCJ_SUPPORT_FALSE = @ENABLE_GCJ_SUPPORT_FALSE@ |
| ENABLE_GCJ_SUPPORT_TRUE = @ENABLE_GCJ_SUPPORT_TRUE@ |
| EXEEXT = @EXEEXT@ |
| EXTRA_TEST_LIBS = @EXTRA_TEST_LIBS@ |
| F77 = @F77@ |
| FFLAGS = @FFLAGS@ |
| GC_CFLAGS = @GC_CFLAGS@ |
| GC_VERSION = @GC_VERSION@ |
| GREP = @GREP@ |
| INCLUDES = @INCLUDES@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| LDFLAGS = @LDFLAGS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ |
| MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ |
| MAKEINFO = @MAKEINFO@ |
| NEED_ATOMIC_OPS_ASM_FALSE = @NEED_ATOMIC_OPS_ASM_FALSE@ |
| NEED_ATOMIC_OPS_ASM_TRUE = @NEED_ATOMIC_OPS_ASM_TRUE@ |
| OBJEXT = @OBJEXT@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PTHREADS_FALSE = @PTHREADS_FALSE@ |
| PTHREADS_TRUE = @PTHREADS_TRUE@ |
| RANLIB = @RANLIB@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| THREADDLLIBS = @THREADDLLIBS@ |
| THREADS_FALSE = @THREADS_FALSE@ |
| THREADS_TRUE = @THREADS_TRUE@ |
| UNWINDLIBS = @UNWINDLIBS@ |
| USE_INTERNAL_LIBATOMIC_OPS_FALSE = @USE_INTERNAL_LIBATOMIC_OPS_FALSE@ |
| USE_INTERNAL_LIBATOMIC_OPS_TRUE = @USE_INTERNAL_LIBATOMIC_OPS_TRUE@ |
| USE_LIBDIR_FALSE = @USE_LIBDIR_FALSE@ |
| USE_LIBDIR_TRUE = @USE_LIBDIR_TRUE@ |
| VERSION = @VERSION@ |
| WIN32_THREADS_FALSE = @WIN32_THREADS_FALSE@ |
| WIN32_THREADS_TRUE = @WIN32_THREADS_TRUE@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_CXX = @ac_ct_CXX@ |
| ac_ct_F77 = @ac_ct_F77@ |
| addlibs = @addlibs@ |
| addobjs = @addobjs@ |
| am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ |
| am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
| am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ |
| am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| atomic_ops_libs = @atomic_ops_libs@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| extra_ldflags_libgc = @extra_ldflags_libgc@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| subdirs = @subdirs@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_all = @target_all@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| |
| # We currently use the source files directly from libatomic_ops, if we |
| # use the internal version. This is done since libatomic_ops doesn't |
| # use libtool, since it has no real use for it. But that seems to make |
| # it hard to use either the resulting object files or libraries. |
| # Thus there seems too be no real reason to recusively build in the |
| # libatomic_ops directory. |
| # if USE_INTERNAL_LIBATOMICS_OPS |
| # SUBDIRS = @maybe_libatomic_ops@ |
| # else |
| # SUBDIRS = |
| # endif |
| SUBDIRS = |
| |
| # Initialize variables so that we can declare files locally. |
| |
| # FIXME: If Visual C++ users use Makefile.am, this should go into |
| # pkginclude_HEADERS with proper AM_CONDITIONALization. Otherwise |
| # delete this comment. |
| |
| # documentation which is not installed |
| # |
| |
| # other makefiles |
| # :GOTCHA: deliberately we do not include 'Makefile' |
| |
| # files used by makefiles other than Makefile.am |
| # |
| |
| # The libatomic_ops library. This is not ideal, since we pick up junk from |
| # there. The hard-coded version number should also go. |
| |
| # :FIXME: why do we distribute this one??? |
| # |
| EXTRA_DIST = gc_cpp.cpp README.QUICK BCC_MAKEFILE NT_MAKEFILE \ |
| NT_THREADS_MAKEFILE OS2_MAKEFILE PCR-Makefile digimars.mak \ |
| EMX_MAKEFILE Makefile.direct Makefile.dj Makefile.DLLs \ |
| SMakefile.amiga WCC_MAKEFILE configure_atomic_ops.sh \ |
| NT_STATIC_THREADS_MAKEFILE NT_X64_STATIC_THREADS_MAKEFILE \ |
| add_gc_prefix.c gcname.c if_mach.c if_not_there.c \ |
| hpux_test_and_clear.s gc.mak MacOS.c MacProjects.sit.hqx \ |
| mach_dep.c setjmp_t.c threadlibs.c AmigaOS.c \ |
| Mac_files/datastart.c Mac_files/dataend.c \ |
| Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \ |
| include/private/msvc_dbg.h msvc_dbg.c libatomic_ops-1.2 \ |
| libtool.m4 cord/cordbscs.c cord/cordtest.c cord/de.c \ |
| cord/cordprnt.c cord/cordxtra.c cord/de_cmds.h cord/de_win.h \ |
| cord/de_win.c cord/de_win.RC cord/de_win.ICO |
| |
| # C Library |
| # --------- |
| lib_LTLIBRARIES = libgc.la $(am__append_4) libcord.la |
| include_HEADERS = |
| |
| # installed headers |
| # |
| pkginclude_HEADERS = $(am__append_5) include/gc.h include/gc_typed.h \ |
| include/gc_inline.h include/gc_mark.h include/gc_cpp.h \ |
| include/weakpointer.h include/new_gc_alloc.h \ |
| include/gc_allocator.h include/gc_backptr.h include/gc_gcj.h \ |
| include/leak_detector.h include/gc_amiga_redirects.h \ |
| include/gc_pthread_redirects.h include/gc_config_macros.h \ |
| include/gc_tiny_fl.h |
| |
| # headers which are not installed |
| # (see include/include.am for more) |
| # |
| |
| # headers which are not installed |
| # |
| dist_noinst_HEADERS = version.h include/private/gc_hdrs.h \ |
| include/private/gc_priv.h include/private/gcconfig.h \ |
| include/private/gc_pmark.h include/private/gc_locks.h \ |
| include/private/dbg_mlc.h include/private/specific.h \ |
| include/private/cord_pos.h include/private/pthread_support.h \ |
| include/private/pthread_stop_world.h \ |
| include/private/darwin_semaphore.h \ |
| include/private/darwin_stop_world.h \ |
| include/private/thread_local_alloc.h include/cord.h \ |
| include/ec.h include/javaxfc.h |
| TESTS = gctest$(EXEEXT) leaktest$(EXEEXT) middletest$(EXEEXT) \ |
| $(am__append_6) $(am__append_8) |
| pkgconfigdir = $(libdir)/pkgconfig |
| dist_pkgconfig_DATA = bdw-gc.pc |
| libgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c \ |
| dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c malloc.c \ |
| mallocx.c mark.c mark_rts.c misc.c new_hblk.c obj_map.c \ |
| os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c \ |
| specific.c stubborn.c typd_mlc.c backgraph.c \ |
| thread_local_alloc.c $(am__append_1) $(am__append_2) \ |
| $(am__append_3) |
| @NEED_ATOMIC_OPS_ASM_TRUE@nodist_libgc_la_SOURCES = atomic_ops_sysdeps.S |
| @USE_INTERNAL_LIBATOMIC_OPS_TRUE@nodist_libgc_la_SOURCES = atomic_ops.c |
| |
| # Include THREADDLLIBS here to ensure that the correct versions of |
| # linuxthread semaphore functions get linked: |
| libgc_la_LIBADD = @addobjs@ $(THREADDLLIBS) $(UNWINDLIBS) |
| libgc_la_DEPENDENCIES = @addobjs@ |
| libgc_la_LDFLAGS = $(extra_ldflags_libgc) -version-info 1:3:0 -no-undefined |
| EXTRA_libgc_la_SOURCES = alpha_mach_dep.S \ |
| mips_sgi_mach_dep.s mips_ultrix_mach_dep.s \ |
| rs6000_mach_dep.s sparc_mach_dep.S sparc_netbsd_mach_dep.s \ |
| sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s |
| |
| @CPLUSPLUS_TRUE@libgccpp_la_SOURCES = gc_cpp.cc |
| @CPLUSPLUS_TRUE@libgccpp_la_LIBADD = $(top_builddir)/libgc.la |
| @CPLUSPLUS_TRUE@libgccpp_la_LDFLAGS = -version-info 1:3:0 -no-undefined |
| |
| # Misc |
| # ---- |
| AM_CXXFLAGS = @GC_CFLAGS@ |
| AM_CFLAGS = @GC_CFLAGS@ |
| @COMPILER_XLC_FALSE@ASM_CPP_OPTIONS = -Wp,-P -x assembler-with-cpp |
| |
| #all_objs = @addobjs@ $(libgc_la_OBJECTS) |
| #$(all_objs) : include/private/gcconfig.h include/private/gc_priv.h \ |
| #include/private/gc_hdrs.h include/gc.h include/gc_gcj.h \ |
| #include/gc_pthread_redirects.h include/gc_config_macros.h \ |
| #include/private/thread_local_alloc.h include/private_support.h \ |
| #include/private/pthread_stop_world.h \ |
| #include/gc_mark.h @addincludes@ |
| @COMPILER_XLC_TRUE@ASM_CPP_OPTIONS = |
| dist_noinst_SCRIPTS = callprocs configure.host |
| |
| # this is an auxiliary shell file used by Makefile and Makefile.direct |
| # |
| CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host |
| libcord_la_LIBADD = $(top_builddir)/libgc.la |
| libcord_la_LDFLAGS = -version-info 1:3:0 -no-undefined |
| libcord_la_SOURCES = \ |
| cord/cordbscs.c \ |
| cord/cordprnt.c \ |
| cord/cordtest.c \ |
| cord/cordxtra.c |
| |
| |
| # Common libs to _LDADD for all tests. |
| test_ldadd = $(top_builddir)/libgc.la $(EXTRA_TEST_LIBS) |
| gctest_SOURCES = tests/test.c |
| gctest_LDADD = $(test_ldadd) |
| gctest_DEPENDENCIES = $(top_builddir)/libgc.la |
| leaktest_SOURCES = tests/leak_test.c |
| leaktest_LDADD = $(test_ldadd) |
| middletest_SOURCES = tests/middle.c |
| middletest_LDADD = $(test_ldadd) |
| @THREADS_TRUE@threadleaktest_SOURCES = tests/thread_leak_test.c |
| @THREADS_TRUE@threadleaktest_LDADD = $(test_ldadd) |
| @CPLUSPLUS_TRUE@test_cpp_SOURCES = tests/test_cpp.cc |
| @CPLUSPLUS_TRUE@test_cpp_LDADD = libgccpp.la $(test_ldadd) |
| |
| # installed documentation |
| # |
| dist_pkgdata_DATA = \ |
| doc/barrett_diagram \ |
| doc/debugging.html \ |
| doc/gc.man \ |
| doc/gcdescr.html \ |
| doc/README \ |
| doc/README.amiga \ |
| doc/README.arm.cross \ |
| doc/README.autoconf \ |
| doc/README.changes \ |
| doc/README.contributors \ |
| doc/README.cords \ |
| doc/README.DGUX386 \ |
| doc/README.dj \ |
| doc/README.environment \ |
| doc/README.ews4800 \ |
| doc/README.hp \ |
| doc/README.linux \ |
| doc/README.Mac \ |
| doc/README.MacOSX \ |
| doc/README.macros \ |
| doc/README.OS2 \ |
| doc/README.rs6000 \ |
| doc/README.sgi \ |
| doc/README.solaris2 \ |
| doc/README.uts \ |
| doc/README.win32 \ |
| doc/README.win64 \ |
| doc/overview.html \ |
| doc/tree.html \ |
| doc/leak.html \ |
| doc/gcinterface.html \ |
| doc/scale.html \ |
| doc/README.darwin \ |
| doc/simple_example.html \ |
| doc/porting.html |
| |
| all: all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .S .c .cc .lo .o .obj .s |
| am--refresh: |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/include/include.am $(srcdir)/cord/cord.am $(srcdir)/tests/tests.am $(srcdir)/doc/doc.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ |
| cd $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| bdw-gc.pc: $(top_builddir)/config.status $(srcdir)/bdw-gc.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| install-libLTLIBRARIES: $(lib_LTLIBRARIES) |
| @$(NORMAL_INSTALL) |
| test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" |
| @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ |
| if test -f $$p; then \ |
| f=$(am__strip_dir) \ |
| echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ |
| $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ |
| else :; fi; \ |
| done |
| |
| uninstall-libLTLIBRARIES: |
| @$(NORMAL_UNINSTALL) |
| @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ |
| p=$(am__strip_dir) \ |
| echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ |
| $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ |
| done |
| |
| clean-libLTLIBRARIES: |
| -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) |
| @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ |
| dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ |
| test "$$dir" != "$$p" || dir=.; \ |
| echo "rm -f \"$${dir}/so_locations\""; \ |
| rm -f "$${dir}/so_locations"; \ |
| done |
| cord/$(am__dirstamp): |
| @$(mkdir_p) cord |
| @: > cord/$(am__dirstamp) |
| cord/$(DEPDIR)/$(am__dirstamp): |
| @$(mkdir_p) cord/$(DEPDIR) |
| @: > cord/$(DEPDIR)/$(am__dirstamp) |
| cord/cordbscs.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp) |
| cord/cordprnt.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp) |
| cord/cordtest.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp) |
| cord/cordxtra.lo: cord/$(am__dirstamp) cord/$(DEPDIR)/$(am__dirstamp) |
| libcord.la: $(libcord_la_OBJECTS) $(libcord_la_DEPENDENCIES) |
| $(LINK) -rpath $(libdir) $(libcord_la_LDFLAGS) $(libcord_la_OBJECTS) $(libcord_la_LIBADD) $(LIBS) |
| libgc.la: $(libgc_la_OBJECTS) $(libgc_la_DEPENDENCIES) |
| $(LINK) -rpath $(libdir) $(libgc_la_LDFLAGS) $(libgc_la_OBJECTS) $(libgc_la_LIBADD) $(LIBS) |
| libgccpp.la: $(libgccpp_la_OBJECTS) $(libgccpp_la_DEPENDENCIES) |
| $(CXXLINK) $(am_libgccpp_la_rpath) $(libgccpp_la_LDFLAGS) $(libgccpp_la_OBJECTS) $(libgccpp_la_LIBADD) $(LIBS) |
| |
| clean-checkPROGRAMS: |
| @list='$(check_PROGRAMS)'; for p in $$list; do \ |
| f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ |
| echo " rm -f $$p $$f"; \ |
| rm -f $$p $$f ; \ |
| done |
| tests/$(am__dirstamp): |
| @$(mkdir_p) tests |
| @: > tests/$(am__dirstamp) |
| tests/$(DEPDIR)/$(am__dirstamp): |
| @$(mkdir_p) tests/$(DEPDIR) |
| @: > tests/$(DEPDIR)/$(am__dirstamp) |
| tests/test.$(OBJEXT): tests/$(am__dirstamp) \ |
| tests/$(DEPDIR)/$(am__dirstamp) |
| gctest$(EXEEXT): $(gctest_OBJECTS) $(gctest_DEPENDENCIES) |
| @rm -f gctest$(EXEEXT) |
| $(LINK) $(gctest_LDFLAGS) $(gctest_OBJECTS) $(gctest_LDADD) $(LIBS) |
| tests/leak_test.$(OBJEXT): tests/$(am__dirstamp) \ |
| tests/$(DEPDIR)/$(am__dirstamp) |
| leaktest$(EXEEXT): $(leaktest_OBJECTS) $(leaktest_DEPENDENCIES) |
| @rm -f leaktest$(EXEEXT) |
| $(LINK) $(leaktest_LDFLAGS) $(leaktest_OBJECTS) $(leaktest_LDADD) $(LIBS) |
| tests/middle.$(OBJEXT): tests/$(am__dirstamp) \ |
| tests/$(DEPDIR)/$(am__dirstamp) |
| middletest$(EXEEXT): $(middletest_OBJECTS) $(middletest_DEPENDENCIES) |
| @rm -f middletest$(EXEEXT) |
| $(LINK) $(middletest_LDFLAGS) $(middletest_OBJECTS) $(middletest_LDADD) $(LIBS) |
| tests/test_cpp.$(OBJEXT): tests/$(am__dirstamp) \ |
| tests/$(DEPDIR)/$(am__dirstamp) |
| test_cpp$(EXEEXT): $(test_cpp_OBJECTS) $(test_cpp_DEPENDENCIES) |
| @rm -f test_cpp$(EXEEXT) |
| $(CXXLINK) $(test_cpp_LDFLAGS) $(test_cpp_OBJECTS) $(test_cpp_LDADD) $(LIBS) |
| tests/thread_leak_test.$(OBJEXT): tests/$(am__dirstamp) \ |
| tests/$(DEPDIR)/$(am__dirstamp) |
| threadleaktest$(EXEEXT): $(threadleaktest_OBJECTS) $(threadleaktest_DEPENDENCIES) |
| @rm -f threadleaktest$(EXEEXT) |
| $(LINK) $(threadleaktest_LDFLAGS) $(threadleaktest_OBJECTS) $(threadleaktest_LDADD) $(LIBS) |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| -rm -f cord/cordbscs.$(OBJEXT) |
| -rm -f cord/cordbscs.lo |
| -rm -f cord/cordprnt.$(OBJEXT) |
| -rm -f cord/cordprnt.lo |
| -rm -f cord/cordtest.$(OBJEXT) |
| -rm -f cord/cordtest.lo |
| -rm -f cord/cordxtra.$(OBJEXT) |
| -rm -f cord/cordxtra.lo |
| -rm -f tests/leak_test.$(OBJEXT) |
| -rm -f tests/middle.$(OBJEXT) |
| -rm -f tests/test.$(OBJEXT) |
| -rm -f tests/test_cpp.$(OBJEXT) |
| -rm -f tests/thread_leak_test.$(OBJEXT) |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/allchblk.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atomic_ops.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/backgraph.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/blacklst.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/checksums.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/darwin_stop_world.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dbg_mlc.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dyn_load.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/finalize.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc_cpp.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gc_dlopen.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gcj_mlc.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/headers.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/malloc.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mallocx.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mark_rts.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/new_hblk.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/obj_map.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/os_dep.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pcr_interface.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pthread_stop_world.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pthread_support.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ptr_chck.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/real_malloc.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reclaim.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/specific.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stubborn.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/thread_local_alloc.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/typd_mlc.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/win32_threads.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordbscs.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordprnt.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordtest.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@cord/$(DEPDIR)/cordxtra.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/leak_test.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/middle.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test_cpp.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/thread_leak_test.Po@am__quote@ |
| |
| .S.o: |
| $(CCASCOMPILE) -c $< |
| |
| .S.obj: |
| $(CCASCOMPILE) -c `$(CYGPATH_W) '$<'` |
| |
| .c.o: |
| @am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`; \ |
| @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \ |
| @am__fastdepCC_TRUE@ then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ $< |
| |
| .c.obj: |
| @am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`; \ |
| @am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ |
| @am__fastdepCC_TRUE@ then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` |
| |
| .c.lo: |
| @am__fastdepCC_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`; \ |
| @am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \ |
| @am__fastdepCC_TRUE@ then mv -f "$$depbase.Tpo" "$$depbase.Plo"; else rm -f "$$depbase.Tpo"; exit 1; fi |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< |
| |
| .cc.o: |
| @am__fastdepCXX_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`; \ |
| @am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \ |
| @am__fastdepCXX_TRUE@ then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ $< |
| |
| .cc.obj: |
| @am__fastdepCXX_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`; \ |
| @am__fastdepCXX_TRUE@ if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ |
| @am__fastdepCXX_TRUE@ then mv -f "$$depbase.Tpo" "$$depbase.Po"; else rm -f "$$depbase.Tpo"; exit 1; fi |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCXX_FALSE@ $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'` |
| |
| .cc.lo: |
| @am__fastdepCXX_TRUE@ depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`; \ |
| @am__fastdepCXX_TRUE@ if $(LTCXXCOMPILE) -MT $@ -MD -MP -MF "$$depbase.Tpo" -c -o $@ $<; \ |
| @am__fastdepCXX_TRUE@ then mv -f "$$depbase.Tpo" "$$depbase.Plo"; else rm -f "$$depbase.Tpo"; exit 1; fi |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCXX_FALSE@ $(LTCXXCOMPILE) -c -o $@ $< |
| |
| .s.o: |
| $(CCASCOMPILE) -c $< |
| |
| .s.obj: |
| $(CCASCOMPILE) -c `$(CYGPATH_W) '$<'` |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| -rm -rf cord/.libs cord/_libs |
| |
| distclean-libtool: |
| -rm -f libtool |
| uninstall-info-am: |
| install-dist_pkgconfigDATA: $(dist_pkgconfig_DATA) |
| @$(NORMAL_INSTALL) |
| test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)" |
| @list='$(dist_pkgconfig_DATA)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(dist_pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ |
| $(dist_pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ |
| done |
| |
| uninstall-dist_pkgconfigDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_pkgconfig_DATA)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ |
| done |
| install-dist_pkgdataDATA: $(dist_pkgdata_DATA) |
| @$(NORMAL_INSTALL) |
| test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)" |
| @list='$(dist_pkgdata_DATA)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(dist_pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \ |
| $(dist_pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \ |
| done |
| |
| uninstall-dist_pkgdataDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(dist_pkgdata_DATA)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \ |
| done |
| install-includeHEADERS: $(include_HEADERS) |
| @$(NORMAL_INSTALL) |
| test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" |
| @list='$(include_HEADERS)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ |
| $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ |
| done |
| |
| uninstall-includeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(include_HEADERS)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(includedir)/$$f"; \ |
| done |
| install-pkgincludeHEADERS: $(pkginclude_HEADERS) |
| @$(NORMAL_INSTALL) |
| test -z "$(pkgincludedir)" || $(mkdir_p) "$(DESTDIR)$(pkgincludedir)" |
| @list='$(pkginclude_HEADERS)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(pkgincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgincludedir)/$$f'"; \ |
| $(pkgincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgincludedir)/$$f"; \ |
| done |
| |
| uninstall-pkgincludeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(pkginclude_HEADERS)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(pkgincludedir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(pkgincludedir)/$$f"; \ |
| done |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| mostlyclean-recursive clean-recursive distclean-recursive \ |
| maintainer-clean-recursive: |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| check-TESTS: $(TESTS) |
| @failed=0; all=0; xfail=0; xpass=0; skip=0; \ |
| srcdir=$(srcdir); export srcdir; \ |
| list='$(TESTS)'; \ |
| if test -n "$$list"; then \ |
| for tst in $$list; do \ |
| if test -f ./$$tst; then dir=./; \ |
| elif test -f $$tst; then dir=; \ |
| else dir="$(srcdir)/"; fi; \ |
| if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *" $$tst "*) \ |
| xpass=`expr $$xpass + 1`; \ |
| failed=`expr $$failed + 1`; \ |
| echo "XPASS: $$tst"; \ |
| ;; \ |
| *) \ |
| echo "PASS: $$tst"; \ |
| ;; \ |
| esac; \ |
| elif test $$? -ne 77; then \ |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *" $$tst "*) \ |
| xfail=`expr $$xfail + 1`; \ |
| echo "XFAIL: $$tst"; \ |
| ;; \ |
| *) \ |
| failed=`expr $$failed + 1`; \ |
| echo "FAIL: $$tst"; \ |
| ;; \ |
| esac; \ |
| else \ |
| skip=`expr $$skip + 1`; \ |
| echo "SKIP: $$tst"; \ |
| fi; \ |
| done; \ |
| if test "$$failed" -eq 0; then \ |
| if test "$$xfail" -eq 0; then \ |
| banner="All $$all tests passed"; \ |
| else \ |
| banner="All $$all tests behaved as expected ($$xfail expected failures)"; \ |
| fi; \ |
| else \ |
| if test "$$xpass" -eq 0; then \ |
| banner="$$failed of $$all tests failed"; \ |
| else \ |
| banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \ |
| fi; \ |
| fi; \ |
| dashes="$$banner"; \ |
| skipped=""; \ |
| if test "$$skip" -ne 0; then \ |
| skipped="($$skip tests were not run)"; \ |
| test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$skipped"; \ |
| fi; \ |
| report=""; \ |
| if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ |
| report="Please report to $(PACKAGE_BUGREPORT)"; \ |
| test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$report"; \ |
| fi; \ |
| dashes=`echo "$$dashes" | sed s/./=/g`; \ |
| echo "$$dashes"; \ |
| echo "$$banner"; \ |
| test -z "$$skipped" || echo "$$skipped"; \ |
| test -z "$$report" || echo "$$report"; \ |
| echo "$$dashes"; \ |
| test "$$failed" -eq 0; \ |
| else :; fi |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| mkdir $(distdir) |
| $(mkdir_p) $(distdir)/. $(distdir)/Mac_files $(distdir)/cord $(distdir)/doc $(distdir)/include $(distdir)/include/private $(distdir)/tests |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ |
| list='$(DISTFILES)'; for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ |
| esac; \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
| dir="/$$dir"; \ |
| $(mkdir_p) "$(distdir)$$dir"; \ |
| else \ |
| dir=''; \ |
| fi; \ |
| if test -d $$d/$$file; then \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || $(mkdir_p) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| distdir=`$(am__cd) $(distdir) && pwd`; \ |
| top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$top_distdir" \ |
| distdir="$$distdir/$$subdir" \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r $(distdir) |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| dist-tarZ: distdir |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__remove_distdir) |
| |
| dist-shar: distdir |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__remove_distdir) |
| |
| dist dist-all: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir); chmod a+w $(distdir) |
| mkdir $(distdir)/_build |
| mkdir $(distdir)/_inst |
| chmod a-w $(distdir) |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && cd $(distdir)/_build \ |
| && ../configure --srcdir=.. --prefix="$$dc_install_base" \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck |
| $(am__remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' |
| distuninstallcheck: |
| @cd $(distuninstallcheck_dir) \ |
| && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) |
| $(MAKE) $(AM_MAKEFLAGS) check-TESTS |
| check: check-recursive |
| all-am: Makefile $(LTLIBRARIES) $(SCRIPTS) $(DATA) $(HEADERS) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(includedir)" "$(DESTDIR)$(pkgincludedir)"; do \ |
| test -z "$$dir" || $(mkdir_p) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -rm -f cord/$(DEPDIR)/$(am__dirstamp) |
| -rm -f cord/$(am__dirstamp) |
| -rm -f tests/$(DEPDIR)/$(am__dirstamp) |
| -rm -f tests/$(am__dirstamp) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \ |
| clean-libtool mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf ./$(DEPDIR) cord/$(DEPDIR) tests/$(DEPDIR) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-compile distclean-generic \ |
| distclean-libtool distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-dist_pkgconfigDATA install-dist_pkgdataDATA \ |
| install-includeHEADERS install-pkgincludeHEADERS |
| |
| install-exec-am: install-libLTLIBRARIES |
| |
| install-info: install-info-recursive |
| |
| install-man: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -rf ./$(DEPDIR) cord/$(DEPDIR) tests/$(DEPDIR) |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic \ |
| mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-dist_pkgconfigDATA uninstall-dist_pkgdataDATA \ |
| uninstall-includeHEADERS uninstall-info-am \ |
| uninstall-libLTLIBRARIES uninstall-pkgincludeHEADERS |
| |
| uninstall-info: uninstall-info-recursive |
| |
| .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ |
| check-TESTS check-am clean clean-checkPROGRAMS clean-generic \ |
| clean-libLTLIBRARIES clean-libtool clean-recursive ctags \ |
| ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \ |
| dist-tarZ dist-zip distcheck distclean distclean-compile \ |
| distclean-generic distclean-libtool distclean-recursive \ |
| distclean-tags distcleancheck distdir distuninstallcheck dvi \ |
| dvi-am html html-am info info-am install install-am \ |
| install-data install-data-am install-dist_pkgconfigDATA \ |
| install-dist_pkgdataDATA install-exec install-exec-am \ |
| install-includeHEADERS install-info install-info-am \ |
| install-libLTLIBRARIES install-man install-pkgincludeHEADERS \ |
| install-strip installcheck installcheck-am installdirs \ |
| installdirs-am maintainer-clean maintainer-clean-generic \ |
| maintainer-clean-recursive mostlyclean mostlyclean-compile \ |
| mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \ |
| pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ |
| uninstall-dist_pkgconfigDATA uninstall-dist_pkgdataDATA \ |
| uninstall-includeHEADERS uninstall-info-am \ |
| uninstall-libLTLIBRARIES uninstall-pkgincludeHEADERS |
| |
| .s.lo: |
| $(LTCOMPILE) $(ASM_CPP_OPTIONS) -c $< |
| |
| .S.lo: |
| $(LTCOMPILE) $(ASM_CPP_OPTIONS) -c $< |
| |
| # |
| # :GOTCHA: GNU make rule for making .s out of .S is flawed, |
| # it will not remove dest if building fails |
| .S.s: |
| if $(CPP) $< >$@ ; then :; else rm -f $@; fi |
| |
| # Putting these at the top causes cord to be built first, and not find libgc.a |
| # on HP/UX. There may be a better fix. |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |