| 2010-10-26 Werner Koch <wk@g10code.com> | |
| Release 1.10. | |
| * configure.ac: Set LT version to C8/A8/R0. | |
| * config.guess: Update to version 2010-09-24. | |
| * config.sub: Update to version 2010-09-11. | |
| 2010-10-20 Werner Koch <wk@g10code.com> | |
| * potomo: New. Copied from GnuPG. | |
| * Makefile.am (install-data-hook) [W32]: New. | |
| * src/init.c (get_locale_dir): Strip the "bin" part. | |
| * src/gpg-error.c (get_locale_dir): Ditto. | |
| 2010-09-30 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in: Add GPG_ERR_FULLY_CANCELED. | |
| 2010-09-16 Werner Koch <wk@g10code.com> | |
| * src/w32-gettext.c (module_init): Do not set a constructur if not | |
| build as DLL. | |
| (_gpg_w32__init_gettext_module): New. | |
| 2010-09-16 gettextize <bug-gnu-gettext@gnu.org> | |
| * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17. | |
| 2010-09-16 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in: Add GPG_ERR_MISSING_ISSUER_CERT. | |
| * src/Makefile.am (err-sources.h, err-codes.h): Built them in the | |
| source directory. | |
| 2010-09-02 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in: Add GPG_ERR_NOT_INITIALIZED. | |
| 2010-08-19 Werner Koch <wk@g10code.com> | |
| * configure.ac (AH_BOTTOM): Define GPG_ERR_ENABLE_ERRNO_MACROS. | |
| * src/w32ce-add.h (strerror) [!GPG_ERR_ENABLE_ERRNO_MACROS]: Do | |
| not define. | |
| 2010-07-21 Werner Koch <wk@g10code.com> | |
| Release 1.9. | |
| * configure.ac: Set LT version to C7/A7/R0. | |
| 2010-07-20 Werner Koch <wk@g10code.com> | |
| * src/init.c (DllMain) [!DLL_EXPORT]: Do not build. | |
| (gpg_err_init) [W32][!DLL_EXPORT]: Init TLS. | |
| (gpg_err_deinit): New. | |
| * src/gpg-error.def.in: Add gpg_err_deinit. | |
| * src/gpg-error.h.in: Add gpg_err_deinit. | |
| 2010-07-05 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in (GPG_ERR_TOO_MANY, GPG_ERR_LIMIT_REACHED): New. | |
| 2010-06-18 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in (GPG_ERR_MISSING_KEY): New. | |
| 2010-05-06 Werner Koch <wk@g10code.com> | |
| Release 1.8. | |
| * configure.ac: Set LT version to C6/A6/R0. | |
| 2010-04-14 Werner Koch <wk@g10code.com> | |
| * src/init.c (_gpg_w32ce_get_errno): Add native error mapping. | |
| * src/Makefile.am (mkw32errmap.map.c): New. | |
| * src/mkw32errmap.c (struct table_s): Add field W32CODE2. | |
| (table): Init this field. | |
| (main): Add option --map. | |
| 2010-03-15 Werner Koch <wk@g10code.com> | |
| * src/mkheader.awk: Add emacs local-var line. | |
| * src/w32-add.h (gettext_localename): Fix type in name. | |
| 2010-03-09 Werner Koch <wk@g10code.com> | |
| * src/w32-add.h [!GPG_ERR_ENABLE_GETTEXT_MACROS]: Do not provide | |
| gettext macros. | |
| 2010-03-08 Werner Koch <wk@g10code.com> | |
| * src/w32-add.h (_GPG_ERR_ATTR_FORMAT_ARG): New. | |
| (_gpg_w32_gettext, _gpg_w32_dgettext, _gpg_w32_dngettext): Use it. | |
| 2010-03-01 Werner Koch <wk@g10code.com> | |
| * src/mkw32errmap.c: Map ESPIPE. | |
| 2010-02-17 Werner Koch <wk@g10code.com> | |
| * src/Makefile.am: Revert last change. | |
| (gpg_extra_headers): New. | |
| (nobase_include_HEADERS): Rename to include_HEADERS and remove | |
| extra_headers. | |
| (mkerrcodes.h): Depend on gpg_extra_headers. | |
| (install-data-local): New. | |
| (gpg-extra/errno.h): Create gpg-extra dir if needed. | |
| 2010-02-17 Werner Koch <wk@g10code.com> | |
| * src/Makefile.am (extra_headers): Remove. | |
| 2010-01-21 Werner Koch <wk@g10code.com> | |
| * configure.ac (have_w32ce_system): Initialize to no. | |
| * src/mkstrtable.awk (END): Do not print PREFIX before | |
| LAST_MSGSTR. | |
| * src/init.c (get_locale_dir): Rework to match what gnupg is doing. | |
| (get_root_key, read_w32_registry_string): Remove. | |
| * src/gpg-error.c (get_locale_dir): Replace by code from init.c | |
| (get_root_key, read_w32_registry_string): Remove. | |
| 2010-01-20 Werner Koch <wk@g10code.com> | |
| * src/init.c (gpg_err_init): Factor code out to .. | |
| (real_init): .. new. | |
| * src/Makefile.am (gpg_error_SOURCES): Remove arch_sources. | |
| (export_symbols): Do not prefix gpg-error-def with srcdir. | |
| 2010-01-19 Werner Koch <wk@g10code.com> | |
| * src/init.c (DllMain): Call _w32_gettext_init. | |
| (get_tls): Use it also for standard Windows. | |
| (DllMain): Ditto. | |
| (struct tls_space_s): Move to .. | |
| (get_tls): Make global. | |
| * src/init.h: .. New. | |
| * src/gettext.h: Do not include w32-gettext.h. | |
| * src/w32-gettext.c: Replace by version from GnuPG. | |
| (my_nl_locale_name) [W32CE]: Do not use getenv. Use | |
| GetSystemDefaultLCID. | |
| (struct loaded_domain): Use uint16_t for NSTRINGS and MAPPED to | |
| save space. | |
| (load_domain): Check for too large MO files. | |
| (utf8_to_wchar): Use gpg_err_set_errno. | |
| (bindtextdomain): Rename to _gpg_w32_bindtextdomain. | |
| (textdomain): Rename to _gpg_w32_textdomain. | |
| (gettext): Rename to _gpg_w32_gettext. | |
| (dgettext): Rename to _gpg_w32_dgettext. | |
| (ngettext): Remove. | |
| (gettext_localename): Rename to _gpg_w32_gettext_localename. | |
| (gettext_select_utf8): Rename to _gpg_w32_gettext_use_utf8. | |
| (_gpg_w32_bindtextdomain): Change to only register the directory. | |
| Return the current directory if asked to. | |
| (do_gettext): Add DOMAINNAME arg and take care of it. | |
| * src/w32-add.h: New. | |
| * src/w32-gettext.h: Remove. | |
| * src/Makefile.am (extra-h.in): Process w32-add.h. | |
| (arch_sources): Remove w32-gettext.h. | |
| 2010-01-18 Werner Koch <wk@g10code.com> | |
| * src/init.c (wchar_to_utf8, utf8_to_wchar): New. | |
| * src/gpg-error.c (main): Add option --list. | |
| 2010-01-18 Werner Koch <wk@g10code.com> | |
| * ltmain.sh (wrappers_required): Don't set for mingw32ce. | |
| * tests/Makefile.am (extra_includes): New. | |
| * tests/t-syserror.c (main): Use gpg_err_set_errno. | |
| * src/w32ce-add.h: New. | |
| * src/Makefile.am (EXTRA_DIST): Add it | |
| (extra-h.in): New rule | |
| (gpg-error.h): Pass extra-h.in to mkheader. | |
| * src/mkheader.awk (extra_body): New. | |
| * src/gpg-error.c (get_err_from_number): Use gpg_err_set_errno. | |
| * src/mkw32errmap.c: New | |
| * src/gpg-error.def: Rename to .. | |
| * src/gpg-error.def.in: .. this. | |
| (_gpg_errno_location): New. | |
| * src/init.c (struct tls_space_s, tls_index): New. | |
| (get_tls, _gpg_errno_location, DllMain): New. | |
| (read_w32_registry_string) [W32CE]: Don't expand envvars. | |
| (_gpg_w32ce_strerror): New. | |
| * src/Makefile.am (extra_headers, extra_cppflags): New. | |
| (include_HEADERS): Add extra_headers. Prefix with nobase_. | |
| (libgpg_error_la_CPPFLAGS, gpg_error_CPPFLAGS) | |
| (mkerrcodes.h): Add extra_cppflags. | |
| (RCCOMPILE): Replace libgpg_error_la_CPPFLAGS by direct inclusion | |
| of -DLOCALEDIR. | |
| * configure.ac (HAVE_W32CE_SYSTEM): New AM_CONDITIONAL and | |
| AC_DEFINE. | |
| (GPG_ERROR_CONFIG_ISUBDIRAFTER): New. | |
| * src/gpg-error-config.in <--libs>: Replace fixed -lgpg-error | |
| by subst variable. | |
| (isubdirafter): New. | |
| <--cflags>: Take subst variable in account. Add idirafter stuff. | |
| 2009-10-26 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.h.in (GPG_ERR_SOURCE_DIM): Reduce to 128. | |
| 2009-09-29 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in (GPG_ERR_NO_ENGINE): New. | |
| 2009-09-21 Werner Koch <wk@g10code.com> | |
| * src/err-sources.h.in (GPG_ERR_SOURCE_G13): New. | |
| 2009-08-20 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in: s/octadecimal/octal/. Reported by Petr Pisar. | |
| 2009-07-23 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in: Add GPG_ERR_NOT_ENABLED. | |
| 2009-07-17 Marcus Brinkmann <marcus@g10code.de> | |
| * src/mkerrnos.awk: Output code to cause WSA Errors to be found | |
| from gpg error codes. | |
| * README: Add problem of translating error codes back and forth. | |
| * src/mkerrcodes1.awk: Output code to cause WSA Errors to be | |
| transparently translated. | |
| * src/code-from-errno.c [HAVE_W32_SYSTEM]: Don't include winsock2.h. | |
| (w32_special_errnos) [HAVE_W32_SYSTEM]: Removed. | |
| (gpg_err_code_from_errno) [HAVE_W32_SYSTEM]: Remove special case. | |
| * README: Document problem with printing some WSA Errors. | |
| 2009-06-23 Marcus Brinkmann <marcus@g10code.de> | |
| Update to libtool 2.2.6a. | |
| * configure.ac: Invoke AC_CONFIG_MACRO_DIR. | |
| (AC_LIBTOOL_WIN32_DLL, AC_LIBTOOL_RC): Replace by ... | |
| (LT_PREREQ, LT_INIT, LT_LANG): ... these. | |
| * config.guess, config.sub, install-sh, ltmain.sh, m4/libtool.m4: | |
| Updated to libtool 2.2.6a. | |
| * m4/ltoptions.m4, m4/ltsugar.m4, m4/ltversion.m4, | |
| m4/lt~obsolete.m4: New files from libtool 2.2.6a. | |
| * src/Makefile.am (LTRCCOMPILE): Refactor with ... | |
| (RCCOMPILE): ... this new macro. Add $(libgpg_error_la_CPPFLAGS). | |
| (SUFFIXES): Add .lo. | |
| (.rc.o): Change to ... | |
| (.rc.lo): ... this implicit rule. | |
| (gpg_error_res_ldflag): Removed. | |
| (gpg_error_res): Use libtool object file name here. | |
| (install-def-file): Fix typo. | |
| (libgpg_error_la_LDFLAGS): Remove gpg_error_res_ldflag usage. | |
| (libgpg_error_la_LIBADD): Add gpg_error_res. | |
| 2008-11-26 Werner Koch <wk@g10code.com> | |
| Release 1.7. | |
| * configure.ac: Set LT version to C5/A5/R0. | |
| 2008-11-12 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in: Add GPG_ERR_NO_PASSPHRASE and GPG_ERR_NO_PIN. | |
| 2008-11-08 Moritz <moritz@gnu.org> | |
| * lang/cl/gpg-error.lisp ("gpg_err_code_from_syserror"): Fix | |
| defcfun: removed "(void)". | |
| * lang/cl/gpg-error.lisp (size-t): Wrong call to defctype: | |
| function accepts optional, not keyword argument. | |
| (gpg-error-t): Likewise. | |
| 2008-10-29 Marcus Brinkmann <marcus@g10code.de> | |
| * src/mkstrtable.awk: Make generated code -W clean to silence gcc | |
| warnings. | |
| 2008-08-06 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in (GPG_ERR_NOT_OPERATIONAL): New. | |
| 2008-04-01 Werner Koch <wk@g10code.com> | |
| * configure.ac (AC_INIT): Fix m4 quoting. | |
| 2007-12-11 Werner Koch <wk@g10code.com> | |
| * Makefile.am (EXTRA_DIST): Add COPYING. | |
| 2007-10-29 Werner Koch <wk@g10code.com> | |
| Released 1.6. | |
| * configure.ac: Set LT version to C4/A4/R0. | |
| * config.guess, config.sub: Updated. | |
| * src/err-sources.h.in: (GPG_ERR_SOURCE_KLEO): New. | |
| * w32-gettext.c (SUBLANG_BENGALI_BANGLADESH): Fix to 2 as per MSDN. | |
| (SUBLANG_PUNJABI_PAKISTAN): Remove as it is not in MSDN. | |
| (SUBLANG_ROMANIAN_MOLDOVA): Remove as it is not in MSDN. | |
| (SUBLANG_ROMANIAN_ROMANIA): Change to value 1 as per MSDN. | |
| 2007-09-27 Marcus Brinkmann <marcus@g10code.de> | |
| * src/Makefile.am (%.o): Replace pattern rule with suffix rule. | |
| (SUFFIXES): New variable. | |
| 2007-09-27 Werner Koch <wk@g10code.com> | |
| * src/err-sources.h.in (GPG_ERR_SOURCE_GPA): New. | |
| * src/err-codes.h.in (GPG_ERR_UNFINISHED): New. | |
| 2007-08-03 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac: Call AM_PROG_CC_C_O. Allow --disable-languages. | |
| * autogen.sh: Use = not == in test. | |
| * lang/cl/Makefile.am: Do not use :=, but =. | |
| * Makefile.am [!LANGUAGES_SOME]: Don't add lang to subdirs. | |
| * m4/inttypes-h.m4, m4/lock.m4, m4/visibility.m4: New files. | |
| 2007-05-19 Marcus Brinkmann <marcus@g10code.de> | |
| * lang/cl/gpg-error.lisp (gpg-err-source-t): Add | |
| :gpg-err-source-any. | |
| 2007-06-18 Werner Koch <wk@g10code.com> | |
| * src/code-from-errno.c (w32_special_errnos) [W32]: New. This is | |
| to provide some common mappings for winsocket error codes. | |
| (gpg_err_code_from_errno, gpg_err_code_from_syserror): Use it. | |
| 2007-05-09 Werner Koch <wk@g10code.com> | |
| * src/gpg-error.m4: Print found version on success. | |
| 2006-12-09 Marcus Brinkmann <marcus@g10code.de> | |
| * src/Makefile.am (EXTRA_DIST): Add README. | |
| * src/README: New file. | |
| 2006-12-01 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.c (get_err_from_number): Fix last change. | |
| * src/gpg-error.c (get_err_from_number): Support source and code | |
| number in split format like "7.17". | |
| 2006-11-30 Werner Koch <wk@g10code.com> | |
| Released 1.5. | |
| * configure.ac: Set LT version to C3/A3/R1. | |
| * README: Switch to tar.bz2 and sha1sum. | |
| * src/gpg-error.c (main): Add option --version. | |
| * autogen.sh (FORCE): Add option --force. | |
| * intl/: Removed. | |
| * Makefile.am (SUBDIRS): Removed intl. | |
| * configure.ac (AM_GNU_GETTEXT): Use external flag | |
| * src/Makefile.am: Removed -I../intl. | |
| 2006-11-23 Werner Koch <wk@g10code.com> | |
| * configure.ac: Display configuration status after AC_OUTPUT. | |
| (AC_INIT): Use SVN revision magic. | |
| (AC_GNU_SOURCE): New. | |
| 2006-11-23 gettextize <bug-gnu-gettext@gnu.org> | |
| * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.15. | |
| 2006-11-15 Werner Koch <wk@g10code.com> | |
| * autogen.sh: Add convenience option --build-amd64. | |
| 2006-10-20 Werner Koch <wk@g10code.com> | |
| * Makefile.am (stowinstall): New convenience target. | |
| 2006-09-18 Werner Koch <wk@g10code.com> | |
| * src/gpg-error.def: Added gpg_err_code_from_syserror. | |
| 2006-09-14 Werner Koch <wk@g10code.com> | |
| Released 1.4. | |
| * configure.ac: Set LT version to C3/A3/R0. | |
| (AB_INIT): New. | |
| * autogen.sh (--build-w32): Better cross-compiler locating. | |
| * src/strerror.c (system_strerror_r): Made static. | |
| * tests/t-syserror.c: New. | |
| * tests/Makefile.am (TESTS): Added new test. | |
| * lang/cl/gpg-error.lisp ("gpg_err_code_from_syserror"): New. | |
| (gpg-err-code-from-syserror): New. | |
| (gpg-error-from-syserror): New. | |
| * lang/cl/gpg-error-package.lisp: Export new functions | |
| * src/gpg-error.h.in (gpg_error_from_syserror): New. | |
| * src/code-from-errno.c (gpg_err_code_from_errno): Cosmetic change | |
| to first check whether ERR is zero. | |
| (gpg_err_code_from_syserror): New. | |
| 2006-09-06 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in: Add GPG_ERR_UNKNOWN_OPTION and | |
| GPG_ERR_UNKNOWN_COMMAND. | |
| 2006-09-05 Werner Koch <wk@g10code.com> | |
| * src/err-sources.h.in (GPG_ERR_SOURCE_ANY): New. This is so that | |
| we have source distinguished from the Unknown one but declaring | |
| that it is an gpg-error style error code. | |
| * src/err-codes.h.in: Added GPG_ERR_ASS_* codes, rabnge 257-281. | |
| (GPG_ERR_MISSING_ERRNO): New. | |
| 2006-07-04 Marcus Brinkmann <marcus@g10code.de> | |
| * src/init.c (get_locale_dir): Return NULL instead of garbage. | |
| * src/gpg-error.c (get_locale_dir): Likewise. | |
| Reported by Simon Josefsson <jas@extundo.com>. | |
| 2006-05-30 Marcus Brinkmann <marcus@g10code.de> | |
| * lang/cl/gpg-error.asd.in (gpg-error): Add "depends-on" on cffi. | |
| 2006-05-29 Marcus Brinkmann <marcus@g10code.de> | |
| * src/init.c (gpg_err_init) [!ENABLE_NLS]: Do not initialize the | |
| locale. | |
| * src/gpg-error.c (i18n_init) [!ENABLE_NLS]: Likewise. | |
| Patch submitted by Nils Durner <ndurner@web.de>. | |
| 2006-05-25 Marcus Brinkmann <marcus@g10code.de> | |
| * lang/cl/gpg-error.asd: Renamed to ... | |
| * lang/cl/gpg-error.asd.in: ... this. | |
| * configure.ac (AC_CONFIG_FILES): Add lang/cl/gpg-error.asd.in. | |
| * lang/cl/mkerrcodes.awk, lang/cl/gpg-error-package.lisp, | |
| lang/cl/gpg-error.lisp, lang/cl/gpg-error.asd, lang/cl/Makefile.am | |
| (clfilesdir): Fix package and file names. | |
| * lang/cl/Makefile.am (clfilesdir): Use datadir, not prefix. | |
| 2006-05-05 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac (AC_CONFIG_FILES): Add lang/Makefile and | |
| lang/cl/Makefile. | |
| * Makefile.am (SUBDIRS): Add lang. | |
| * lang: New directory. | |
| * lang/README, lang/Makefile.am: New files. | |
| * lang/cl: New directory. | |
| * lang/cl/Makefile.am, lang/cl/README, lang/cl/gpg-error.asd, | |
| lang/cl/gpg-error-package.lisp, lang/cl/gpg-error.lisp, | |
| lang/cl/mkerrcodes.awk: New files. | |
| 2006-03-14 Marcus Brinkmann <marcus@g10code.de> | |
| Released 1.3. | |
| * configure.ac (LIBGPG_ERROR_LT_REVISION): Bump for release. | |
| Many files regenerated. | |
| * src/Makefile.am (gpg_error_CPPFLAGS, libgpg_error_la_CPPFLAGS): | |
| Add -I../intl. | |
| * Makefile.am (SUBDIRS): Add intl. | |
| * configure.ac (AC_CONFIG_FILES): Add intl/Makefile. | |
| (AM_GNU_GETTEXT_VERSION): Bump to 0.14.5. | |
| 2006-03-06 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac (min_automake_version): Bump to 1.9.6. | |
| * mkinstalldirs, depcomp, compile, INSTALL, COPYING, missing, | |
| install-sh: Update from automake 1.9.6. | |
| ltmain.sh: Update from libtool 1.5.22. | |
| 2006-03-03 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac (LIBGPG_ERROR_LT_CURRENT, LIBGPG_ERROR_LT_AGE): | |
| Bump for release. | |
| (LIBGPG_ERROR_LT_REVISION): Reset to 0 for release. | |
| 2005-11-02 Werner Koch <wk@g10code.com> | |
| * src/Makefile.am (gpg_error_SOURCES): Include ARCH_SOURCES. | |
| * src/gpg-error.c [W32]: Include gettext.h instead of libintl.h. | |
| * configure.ac (AH_BOTTOM): Define ENABLE_NLS for W32 builds. | |
| * src/w32-gettext.h (dgettext): Changed prototype from | |
| libintl_dgettext. | |
| * src/w32-gettext.c: Replaced use of WIN32 by HAVE_W32_SYSTEM on | |
| demand of the holy GNUquisition. | |
| (bindtextdomain, textdomain, dgettext): Need to cast the const way | |
| from the return value. | |
| 2005-10-26 Werner Koch <wk@g10code.com> | |
| * Makefile.am: Used dist-bzip2 option. | |
| 2005-10-25 Marcus Brinkmann <marcus@g10code.de> | |
| * src/w32-gettext.c (get_string): Remove extra arguments to | |
| utf8_to_native_invocation. | |
| (utf8_to_wchar, wchar_to_native): New function. | |
| (utf8_to_native): Rewritten. | |
| * src/Makefile.am (gpg_error_CPPFLAGS): New variable. | |
| * src/gpg-error.c (i18n_init): Don't return anything. | |
| * src/Makefile.am (arch_sources): New variable. | |
| (libgpg_error_la_SOURCES): Add $(arch_sources). | |
| * src/gettext.h [HAVE_W32_SYSTEM]: Include w32-gettext.h. | |
| * src/w32-gettext.h: New file. | |
| * src/w32-gettext.c: New file. | |
| * src/gpg-error.h.in: Check for gcc's constructor attribute. | |
| Use it for gpg_err_init. | |
| (GPG_ERR_INITIALIZED): Define if constructor is available. | |
| * src/gpg-error.c (main) [GPG_ERR_INITIALIZED]: Don't invoke | |
| gpg_err_init. | |
| (i18n_init): Call bindtextdomain as well. Now that gpg-error has | |
| its own gettext implementation, we can't rely on it anymore. | |
| Also, repeat all the w32 stuff for fetching the registry. | |
| 2005-10-23 Marcus Brinkmann <marcus@g10code.de> | |
| * src/Makefile.am (libgpg_error_la_SOURCES): Add init.c. | |
| * src/init.c: New file. | |
| * src/gpg-error.h.in (gpg_error_init): New function. | |
| * src/gpg-error.def: Add gpg_err_init. | |
| * src/gpg-error.c: Remove SIMPLE_GETTEXT stuff. | |
| (i18n_init): Don't bind text domain. | |
| (main): Call gpg_err_init. | |
| 2005-10-20 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac: Instead checking for windres and dlltool, invoke | |
| AC_LIBTOOL_WIN32_DLL and AC_LIBTOOL_RC. | |
| * src/Makefile.am [HAVE_W32_SYSTEM]: Use libtool, which simplifies | |
| the rules. | |
| 2005-10-02 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac: Escape arguments in AC_INIT invocation. | |
| * config.guess, config.sub, ltmain.sh: Update. | |
| 2005-08-19 Werner Koch <wk@g10code.com> | |
| * configure.ac: Add code to allow building a W32 DLL. | |
| * src/Makefile.am: Changed to allow building for W32. | |
| * src/versioninfo.rc.in: New. | |
| * src/gpg-error.def: New. | |
| 2005-06-20 Marcus Brinkmann <marcus@g10code.de> | |
| Released 1.1. | |
| * configure.ac: Bump up LIBGPG_ERROR_LT_REVISION, update version | |
| field. | |
| 2005-06-16 Marcus Brinkmann <marcus@g10code.de> | |
| * src/mkerrcodes.awk: Fix comment. Allow any non-empty line to | |
| start the processing, not only lines starting with numbers. | |
| Reported by Guillaume Libersat <glibersat@hurdfr.org>. | |
| 2005-01-05 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac: Check for locale.h. | |
| 2005-04-20 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in: Add GPG_ERR_LOCKED. | |
| 2005-04-18 Werner Koch <wk@g10code.com> | |
| * src/err-codes.h.in: Add GPG_ERR_UNKNOWN_EXTN and | |
| GPG_ERR_UNKNOWN_CRIT_EXTN. | |
| 2004-12-18 Werner Koch <wk@g10code.com> | |
| * autogen.sh: Add option --build-w32. | |
| 2004-09-14 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.m4: Add copyright note. | |
| * configure.ac: Call AC_CANONICAL_HOST. Suppress warning about | |
| lack of strerror_r on all Solaris platforms. | |
| 2004-07-30 Werner Koch <wk@g10code.de> | |
| Released 1.0. | |
| * configure.ac: Bumbed version to 1.0, LT to C1/A1/R3. | |
| 2004-07-15 Werner Koch <wk@gnupg.org> | |
| * src/err-codes.h.in: Renamed description for CARD_RESET. | |
| 2004-06-28 Werner Koch <wk@gnupg.org> | |
| * src/err-codes.h.in: Add GPG_ERR_INV_REQUEST. | |
| 2004-06-08 Marcus Brinkmann <marcus@g10code.de> | |
| * src/Makefile.am (mkerrcodes): Prefix mkerrcodes.c with $(srcdir) | |
| to fix VPATH build. | |
| 2004-05-25 Marcus Brinkmann <marcus@g10code.de> | |
| * src/err-codes.h.in: Add GPG_ERR_PROTOCOL_VIOLATION and | |
| GPG_ERR_INV_MAC. | |
| 2004-04-23 Marcus Brinkmann <marcus@g10code.de> | |
| * src/Makefile.am (mkerrcodes): Do not use $< in non-inference rule. | |
| (code-from-errno.h): Likewise. | |
| 2004-04-22 Marcus Brinkmann <marcus@g10code.de> | |
| * src/Makefile.am (gpg_error_CPPFLAGS): New variable. | |
| (localedir): Likewise. | |
| * gpg-error.c: Include the gettext headers. | |
| (init_i18n): New function. | |
| (main): Call init_i18n, gettextize messages. | |
| 2004-04-02 Thomas Schwinge <schwinge@nic-nac-project.de> | |
| * autogen.sh: Added ACLOCAL_FLAGS. | |
| 2004-04-19 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.m4: Quote first argument to AC_DEFUN. | |
| * src/mkerrcodes.awk: Allow whitespace before expanded | |
| preprocessor macro (ie, the error code value). Needed for Solaris 2.8. | |
| 2004-04-08 Moritz Schulte <moritz@g10code.de> | |
| * src/gpg-error.c (main): Return zero on success. | |
| 2004-03-09 Marcus Brinkmann <marcus@g10code.de> | |
| * libgpg-error.spec.in (%files): Add gpg-error. Submitted by | |
| Albrecht Dreß <albrecht.dress@arcor.de>. | |
| * src/mkerrcodes.c (main): Fix type of argv. Return something. | |
| 2004-03-09 Werner Koch <wk@gnupg.org> | |
| * Makefile.am (dist-hook): Create a VERSION file for use by mkdiff. | |
| * src/Makefile.am (mkerrcodes.h): Let CPP work on a temporary file. | |
| (CLEANFILES): Add that temporary file. | |
| * configure.ac (AC_PROG_CPP): Added. | |
| * src/err-codes.h.in: Removed trailing spaces from | |
| GPG_ERR_NOT_LOCKED. | |
| 2004-03-08 Werner Koch <wk@gnupg.org> | |
| * src/err-sources.h.in: Added GPG_ERR_SOURCE_GSTI. | |
| 2004-03-07 Marcus Brinkmann <marcus@g10code.de> | |
| Released 0.7. | |
| * configure.ac: Bumbed up LIBGPG_ERROR_LT_REVISON. | |
| * src/gpg-error-config.in: Fix last change. | |
| * src/gpg-error-config.in (Options): Do not emit include and lib | |
| directory for prefix "/usr" or "". | |
| * tests/Makefile.am (INCLUDES): Change to -I$(top_srcdir)/src to | |
| -I$(top_builddir). | |
| 2004-03-01 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac: Define CC_FOR_BUILD. | |
| * src/Makefile.am (BUILT_SOURCES): Add gpg-error.h. | |
| (EXTRA_DIST): Add mkerrcodes.awk and mkerrcodes.c. | |
| (CLEANFILES): Add mkerrcodes.h and mkerrcodes. | |
| (mkerrcodes.h): New target. | |
| (mkerrcodes): New target. | |
| (code-from-errno.h): Rewritten. | |
| * src/errnos.in: Remove include statement (which was ignored | |
| anyway). | |
| * src/mkerrcodes.awk: New file. | |
| * src/mkerrcodes.c: New file. | |
| 2004-02-27 Marcus Brinkmann <marcus@g10code.de> | |
| * src/Makefile.am (noinst_PROGRAMS): Rename to ... | |
| (bin_PROGRAMS): ... this. | |
| * src/gpg-error.h.in: Add extern "C" closure for C-- compilers. | |
| * src/Makefile.am (noinst_PROGRAMS): New variable. | |
| (gpg_error_LDADD): New variable. | |
| (gpg_error_SOURCES): New variable. | |
| (EXTRA_DIST): Add mkheader.awk and gpg-error.h.in. | |
| (BUILT_SOURCES): Add err-sources-sym.h, err-codes-sym.h and | |
| errnos-sym.h. | |
| (CLEANFILES): Add err-sources-sym.h, err-codes-sym.h, | |
| errnos-sym.h and gpg-error.h. | |
| (err-codes.h, err-sources.h): Add -v textidx=3 to mkstrtable.awk | |
| invocation. | |
| (err-codes-sym.h): New target. | |
| (err-sources-sym.h): New target. | |
| (gpg-error.h): New rule. | |
| * src/mkstrtable.awk: Skip the second field (which contains the | |
| error code symbol). | |
| (FS): Allow more than one tab as field separator. | |
| Allow to specify the field to be used as text with the variable | |
| textidx. | |
| Allow to suppress gettext markers in the output. | |
| Allow to specify a prefix to the messages. | |
| Allow to specify a namespace for the variable and macro names. | |
| * src/mkerrnos.awk (FS): Initialize. Understand variable | |
| errnoidx, which defaults to 2, to cope with the error names being | |
| in a different column than the first. | |
| * src/mkerrcodes1.awk: Likewise. Use \t as separator. | |
| * src/mkheader.awk: New file. | |
| * src/errnos.in: Add error code numbers (relativ to | |
| GPG_ERR_SYSTEM_ERROR). | |
| * src/strerror-sym.c: New file. | |
| * src/strsources-sym.c: New file. | |
| * src/err-codes.h.in: Add the error code symbol for every error | |
| code. | |
| (GPG_ERR_BUFFER_TOO_SHORT): Fix error code (it is 200, not 199). | |
| * src/err-sources.h.in: Likewise. | |
| * src/gpg-error.h.in: New file. | |
| * src/gpg-error.h: File removed. | |
| * src/gpg-error.c: New file. | |
| 2004-02-18 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error-config.in: Ignore setting of --prefix. | |
| 2004-02-11 Werner Koch <wk@gnupg.org> | |
| * autogen.sh (check_version): Removed bashism and simplified. | |
| 2004-02-03 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h: Added GPG_ERR_NOT_LOCKED. | |
| 2003-12-22 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h: Added GPG_ERR_LOCALE_PROBLEM. | |
| 2003-12-12 Werner Koch <wk@gnupg.org> | |
| * src/err-codes.h.in: s/revoced/revoked/. | |
| 2003-12-08 Werner Koch <wk@gnupg.org> | |
| * README.CVS: Enhanced. | |
| * autogen.sh: New. | |
| * Makefile.am (EXTRA_DIST): Added autogen.sh. | |
| 2003-11-14 Werner Koch <wk@gnupg.org> | |
| * configure.ac: Bumbed version number to 0.7. | |
| Released 0.6. | |
| * configure.ac: Bumbed up LIBGPG_ERROR_LT_REVISON. | |
| 2003-11-13 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h, src/err-codes.h.in: Removed: GPG_ERR_IO_ERROR, | |
| GPG_ERR_FILE_ERROR, GPG_ERR_READ_ERROR, GPG_ERR_WRITE_ERROR, | |
| GPG_ERR_LOCK_ERROR. | |
| * src/gpg-error.h (GPG_ERR_SOURCE_DIRMNGR): Fixed typo. | |
| 2003-11-12 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h, src/err-codes.h.in: Added these codes: | |
| GPG_ERR_INV_ATTR, GPG_ERR_NO_VALUE, GPG_ERR_NOT_FOUND, | |
| GPG_ERR_VALUE_NOT_FOUND, GPG_ERR_SYNTAX, GPG_ERR_INV_CRL, | |
| GPG_ERR_BAD_BER, GPG_ERR_INV_BER, GPG_ERR_ELEMENT_NOT_FOUND, | |
| GPG_ERR_IDENTIFIER_NOT_FOUND, GPG_ERR_INV_TAG, GPG_ERR_INV_LENGTH, | |
| GPG_ERR_INV_KEYINFO, GPG_ERR_UNEXPECTED_TAG, GPG_ERR_NOT_DER_ENCODED, | |
| GPG_ERR_NO_CMS_OBJ, GPG_ERR_INV_CMS_OBJ, GPG_ERR_UNKNOWN_CMS_OBJ, | |
| GPG_ERR_UNSUPPORTED_CMS_OBJ, GPG_ERR_UNSUPPORTED_ENCODING, | |
| GPG_ERR_UNSUPPORTED_CMS_VERSION, GPG_ERR_UNKNOWN_ALGORITHM, | |
| GPG_ERR_ENCODING_PROBLEM, GPG_ERR_INV_STATE, GPG_ERR_DUP_VALUE, | |
| GPG_ERR_MISSING_ACTION, GPG_ERR_MODULE_NOT_FOUND, | |
| GPG_ERR_INV_OID_STRING, GPG_ERR_INV_TIME, GPG_ERR_INV_CRL_OBJ, | |
| GPG_ERR_UNSUPPORTED_CRL_VERSION, GPG_ERR_INV_CERT_OBJ, | |
| GPG_ERR_UNKNOWN_NAME, GPG_ERR_IO_ERROR, GPG_ERR_FILE_ERROR, | |
| GPG_ERR_READ_ERROR, GPG_ERR_WRITE_ERROR, GPG_ERR_LOCK_ERROR, | |
| GPG_ERR_BUFFER_TOO_SHORT. | |
| 2003-11-06 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h, src/err-sources.h.in: Added error sources for | |
| Libksba and Dirmngr. Added GPG_ERR_TRUNCATED. | |
| 2003-11-03 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h: Allow GPG_ERR_INLINE to get overriden, so that | |
| one can use the -D flag to specify the inline keyword. Suggested | |
| by Philip Brown. | |
| 2003-10-28 Moritz Schulte <mo@g10code.com> | |
| * src/gpg-error.h (gpg_err_code_t): Added: | |
| GPG_ERR_NO_ENCODING_METHOD, GPG_ERR_NO_ENCRYPTION_SCHEME, | |
| GPG_ERR_NO_SIGNATURE_SCHEME. | |
| * src/err-codes.h.in: Likewise. | |
| 2003-10-25 Werner Koch <wk@gnupg.org> | |
| * src/strerror.c: Include stdio.h for snprintf | |
| prototype. Suggested by papadopo@shfj.cea.fr, fixes #gnupg/214. | |
| 2003-10-11 Moritz Schulte <mo@g10code.com> | |
| * src/gpg-error.m4: Do not ask gpg-error-config to change the | |
| prefix, if --with-gpg-error-prefix=... is used. | |
| 2003-10-06 Marcus Brinkmann <marcus@g10code.de> | |
| Released 0.5. | |
| * configure.ac (LIBGPG_ERROR_LT_CURRENT, LIBGPG_ERROR_LT_AGE): | |
| Bump up by one. | |
| 2003-09-30 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.h: Include <stddef.h>. | |
| (gpg_strerror_r): Change prototype to match POSIX. Rewritten for | |
| that prototype. | |
| * src/strerror.c: Include <errno.h>. | |
| (gpg_strerror_r, system_strerror_r): Change prototype to match | |
| POSIX. Rewritten for that prototype. Rewritten for that | |
| prototype. | |
| 2003-09-30 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h: Add PIN_NOT_SYNCED. | |
| 2003-09-13 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac: Invoke AC_FUNC_STRERROR_R. | |
| * src/gpg-error.h (gpg_strerror_r): New prototype. | |
| * src/strerror.c (system_strerror_r): New function. | |
| (gpg_strerror_r): New function. | |
| 2003-09-04 Marcus Brinkmann <marcus@g10code.de> | |
| * libgpg-error.spec.in: New file. | |
| * Makefile.am (EXTRA_DIST): Add libgpg-error.spec.in. | |
| * AUTHORS (Maintainer): Add Robert Schiele as contributor. | |
| 2003-09-03 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error-config.in: Rewritten. | |
| 2003-09-03 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac (AC_INIT): Bump up version number. | |
| 2003-09-03 Marcus Brinkmann <marcus@g10code.de> | |
| Released 0.4. | |
| * src/gpg-error.h: Define GPG_ERR_INLINE to nothing if the | |
| compiler does not implement C99. | |
| * configure.ac: (AC_INIT): Bump up version number. | |
| 2003-09-02 Moritz Schulte <mo@g10code.com> | |
| * src/gpg-error.h (gpg_err_code_t): Added: GPG_ERR_NO_PRIME. | |
| * src/err-codes.h.in: Likewise. | |
| 2003-08-19 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.h (GPG_ERR_SYSTEM_ERROR): Fix value (should have | |
| been 2^15, was 2^14). | |
| (GPG_ERR_CODE_DIM): Fix value (should have been 65536, was 32768). | |
| Change the error codes of all system errors to have the | |
| GPG_ERR_SYSTEM_ERROR bit set. | |
| 2003-08-06 Marcus Brinkmann <marcus@g10code.de> | |
| * code-from-errno.c, code-to-errno.c, err-codes.h.in, | |
| err-sources.h.in, errnos.in, gpg-error.h, strerror.c, strsource.c: | |
| Fix typo in copyright notice. | |
| 2003-07-31 Marcus Brinkmann <marcus@g10code.de> | |
| * README: Clarify copyright conditions. | |
| * src/mkstrtable.awk: Don't claim in the copyright information | |
| that this program is part of libgpg-error. | |
| * src/mkerrnos.awk: Likewise. | |
| * src/mkerrcodes1.awk: Likewise. | |
| * src/mkerrcodes2.awk: Likewise. | |
| 2003-07-31 Marcus Brinkmann <marcus@g10code.de> | |
| * src/strerror.c (gpg_strerror): Use CODE, not ERR to map error | |
| code to errno. | |
| * configure.ac (AC_INIT): Bump version to 0.3. | |
| Released 0.3. | |
| 2003-07-30 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac (AC_INIT): Bump version to 0.2. | |
| Released 0.2. | |
| 2003-07-17 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h: Add HARDWARE, PIN_BLOCKED and USE_CONDITIONS. | |
| 2003-07-16 Moritz Schulte <moritz@g10code.com> | |
| * src/gpg-error.h (gpg_err_code): Cast return value to | |
| gpg_err_code_t. Thanks to Ralf Schneider | |
| <ralf@tapfere-schneiderleins.de>. | |
| (gpg_err_source): Cast return value to gpg_err_source_t. Thanks | |
| to Ralf Schneider <ralf@tapfere-schneiderleins.de>. | |
| 2003-07-15 Moritz Schulte <moritz@g10code.com> | |
| * src/gpg-error.m4 (AM_PATH_GPG_ERROR): Use `0.0' instead of | |
| `0.0.0' in case no version number is given, since the following | |
| sed commands expect the former form, not a triplet. | |
| 2003-07-06 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.h (GPG_ERR_INLINE): Define macro. Use it instead | |
| of __inline__ in this file. | |
| 2003-06-30 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h: Add WRONG_CARD. | |
| 2003-06-22 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.h: Fix value of GPG_ERR_CANCELED. | |
| 2003-06-06 Marcus Brinkmann <marcus@g10code.de> | |
| * configure.ac: Define GPG_ERROR_CONFIG_LIBS and | |
| GPG_ERROR_CONFIG_CFLAGS. | |
| Add src/gpg-error-config to config files. | |
| * src/Makefile.am (EXTRA_DIST): Add gpg-error-config.in and | |
| gpg-error.m4. | |
| (bin_SCRIPTS): New variable. | |
| (m4datadir, m4data_DATA): New variables. | |
| * src/gpg-error-config.in: New file. | |
| * src/gpg-error.m4: New file. | |
| Released 0.1. | |
| 2003-06-05 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.h (gpg_err_make_from_errno): Fix implementation. | |
| * src/gpg-error.h (gpg_err_code_t): Add GPG_ERR_SIG_EXPIRED. | |
| (err-codes.h.in): Likewise. | |
| * src/gpg-error.h (gpg_error_from_errno): Change return type to | |
| gpg_error_t. | |
| 2003-06-04 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.h (gpg_err_code_t): Add GPG_ERR_INV_ENGINE, | |
| GPG_ERR_PUBKEY_NOT_TRUSTED, GPG_ERR_DECRYPT_FAILED, | |
| GPG_ERR_KEY_EXPIRED. | |
| (gpg_make_error): Rename to gpg_err_make. | |
| (gpg_error): Use here. | |
| * tests/t-strerror.c (main): And here. | |
| (gpg_make_error_from_errno): Rename to gpg_err_make_from_errno. | |
| * src/gpg-error.h (gpg_make_error_from_errno): New inline function. | |
| (gpg_error_from_errno): Likewise. | |
| * src/code-from-errno.c (gpg_err_code_from_errno): Handle the case | |
| of no error at all. | |
| 2003-06-04 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg-error.h (gpg_err_source_t): Add GPG_ERR_SOURCE_USER_1 to | |
| GPG_ERR_SOURCE_USER_4. | |
| (gpg_err_code_t): Add GPG_ERR_USER_1 to GPG_ERR_USER_16. | |
| * src/err-sources.h.in: Likewise. | |
| * src/err-codes.h.in: Likewise. | |
| * src/gpg-error.h: Rename GPG_ERR_INVALID_RESPONSE to | |
| GPG_ERR_INV_RESPONSE, GPG_ERR_INVALID_CARD to GPG_ERR_INV_CARD, | |
| GPG_ERR_INVALID_INDEX to GPG_ERR_INV_INDEX, GPG_ERR_INVALID_ID to | |
| GPG_ERR_INV_ID, GPG_ERR_AGENT_ERROR to GPG_ERR_AGENT, | |
| GPG_ERR_ASSUAN_ERROR to GPG_ERR_ASSUAN, GPG_ERR_PIN_ENTRY_ERROR to | |
| GPG_ERR_PIN_ENTRY, GPG_ERR_DIRMNGR_ERROR to GPG_ERR_DIRMNGR, | |
| GPG_ERR_CARD_ERROR to GPG_ERR_CARD, GPG_ERR_CONFIGURATION_ERROR to | |
| GPG_ERR_CONFIGURATION, GPG_ERR_SCDAEMON_ERROR to GPG_ERR_SCDAEMON. | |
| 2003-06-03 Werner Koch <wk@gnupg.org> | |
| * src/gpg-error.h, src/err-codes.h.in: Add codes for TIMEOUT, | |
| INV_HANDLE, NOTHING_FOUND, WRONG_BLOB_TYPE and MISSING_VALUE. | |
| * src/gpg-error.h, src/err-sources.h.in: Add KEYBOX which is the | |
| keybox subsystem of GnuPG. | |
| 2003-06-02 Moritz Schulte <moritz@g10code.com> | |
| * src/gpg-error.h: Fix description of gpg_err_code_to_errno | |
| (i.e. substitute `ERR' with `CODE'). | |
| * src/code-to-errno.c: Likewise. | |
| * tests/t-strerror.c: Include <gpg-error.h> instead of | |
| <gpg/error.h>. | |
| 2003-06-01 Marcus Brinkmann <marcus@g10code.de> | |
| * src/strerror.c: Include <string.h>. | |
| * src/gpg-error.h (gpg_err_code_t): Remove GPG_ERR_FILE_READ, | |
| GPG_ERR_FILE_WRITE, GPG_ERR_FILE_OPEN, GPG_ERR_FILE_CREATE, | |
| GPG_ERR_FILE_CLOSE, GPG_ERR_FILE_DELETE, GPG_ERR_FILE_EXISTS, | |
| GPG_ERR_FILE, GPG_ERR_IO, GPG_ERR_OUT_OF_CORE, GPG_ERR_READ_ERROR, | |
| GPG_ERR_WRITE_ERROR. | |
| * src/err-codes.h.in: Likewise. | |
| * src/Makefile.am (EXTRA_DIST): Add err-sources.h and err-codes.h. | |
| * src/mkerrcodes1.awk: New file. | |
| * src/mkerrcodes2.awk: New file. | |
| * src/mkerrnos.awk: New file. | |
| * src/errnos.in: New file. | |
| * src/code-from-errno.c: New file. | |
| * src/code-to-errno.c: New file. | |
| * src/Makefile.am (libgpg_error_la_SOURCES): Remove err-sources.h | |
| and err-codes.h. Add code-to-errno.c and code-from-errno.c. | |
| (code-to-errno.h): New target. | |
| (code-from-errno.h): Likewise. | |
| (EXTRA_DIST): Add mkerrnos.awk, errnos.in, and mkerrcodes1.awk. | |
| (BUILT_SOURCES): Add code-to-errno.h and code-from-errno.h. | |
| (CLEANFILES): Likewise. | |
| * src/strerror.c (gpg_strerror): Use strerror for system errors. | |
| * src/err-codes.h.in: Add 16382 (Unknown system error). | |
| * src/gpg-error.h (gpg_err_code_t): Add system errors. | |
| (GPG_ERR_CODE_DIM): Change to 32768. | |
| (GPG_ERR_SYSTEM_ERROR): New macro. | |
| (gpg_err_code_from_errno): New prototype. | |
| (gpg_err_code_to_errno): Likewise. | |
| * src/Makefile.am (nobase_include_HEADERS): Rename target to ... | |
| (include_HEADERS): ... this. Change file to gpg-error.h | |
| (libgpg_error_la_SOURCES): Change gpg/error.h to gpg-error.h. | |
| * src/gpg/error.h: Move to ... | |
| * src/gpg-error.h: ... here. New file. | |
| * src/strerror.c: Include <gpg-error.h>, not <gpg/error.h>. | |
| * src/strsource.c: Likewise. | |
| * src/gpg/error.h (gpg_error_t): Change type to unsigned int, not | |
| long. | |
| 2003-05-26 Marcus Brinkmann <marcus@g10code.de> | |
| * src/gpg/error.h (gpg_make_error): Only OR in the error source if | |
| there is an error, this allows to test for success with "if (!err)" | |
| and similar tests. | |
| 2003-05-15 Marcus Brinkmann <marcus@g10code.de> | |
| * src/mkstrtable.awk: Add exception clause to license about the | |
| output of the script. | |
| * configure.ac: Change license to LGPL 2.1 or later. | |
| * Makefile.am: Likewise. | |
| * src/Makefile.am: Likewise. | |
| * src/err-codes.h.in: Likewise. | |
| * src/err-sources.h.in: Likewise. | |
| * src/strsource.c: Likewise. | |
| * src/strerror.c: Likewise. | |
| * src/gpg/error.h: Likewise. | |
| * tests/Makefile.am: Likewise. | |
| * src/mkstrtable.awk: New variable HEADER. Copy input until first | |
| line with an actual code and description occurs. | |
| * src/err-codes.h.in: Uncomment license, so it is copied into the | |
| output. | |
| * src/err-sources.h.in: Likewise. | |
| 2003-05-15 Marcus Brinkmann <marcus@g10code.de> | |
| * COPYING.LIB: New file. | |
| 2003-05-15 Marcus Brinkmann <marcus@g10code.de> | |
| * Initial check-in. | |
| Copyright 2003, 2004, 2005, 2006, 2007, 2010 g10 Code GmbH | |
| This file is free software; as a special exception the author gives | |
| unlimited permission to copy and/or distribute it, with or without | |
| modifications, as long as this notice is preserved. | |
| This file is distributed in the hope that it will be useful, but | |
| WITHOUT ANY WARRANTY, to the extent permitted by law; without even the | |
| implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |