| /* |
| * Copyright (C) 2014 Freescale Semiconductor, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #define SPANSIONFLASH |
| #include "imx6sx-sdb.dts" |
| |
| /* |
| * The CAN transceiver is changed on RevB board. |
| * This dts is used for support the old CAN transceiver on RevA board |
| */ |
| |
| &cpu0 { |
| operating-points = < |
| /* kHz uV */ |
| 996000 1250000 |
| 792000 1175000 |
| 396000 1075000 |
| >; |
| fsl,soc-operating-points = < |
| /* ARM kHz SOC uV */ |
| 996000 1175000 |
| 792000 1175000 |
| 396000 1175000 |
| >; |
| arm-supply = <&sw1a_reg>; |
| soc-supply = <&sw1c_reg>; |
| pu-supply = <&pu_dummy>; |
| fsl,arm-soc-shared = <0>; |
| }; |
| |
| &flexcan1 { |
| trx-en-gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; |
| trx-stby-gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| &flexcan2 { |
| trx-en-gpio = <&gpio4 25 GPIO_ACTIVE_LOW>; |
| trx-stby-gpio = <&gpio4 27 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &pmic { |
| compatible = "fsl,pfuze100"; |
| |
| regulators { |
| sw1c_reg: sw1c { |
| regulator-min-microvolt = <300000>; |
| regulator-max-microvolt = <1875000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| sw4_reg: sw4 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| }; |
| }; |
| |
| &qspi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_qspi2_1>; |
| status = "okay"; |
| ddrsmp=<0>; |
| |
| flash0: s25fl128s@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "spansion,s25fl128s"; |
| spi-max-frequency = <29000000>; |
| reg = <0>; |
| }; |
| |
| flash1: s25fl128s@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "spansion,s25fl128s"; |
| spi-max-frequency = <29000000>; |
| reg = <1>; |
| }; |
| }; |