| Kernel driver i2c-nforce2 | |
| Supported adapters: | |
| * nForce2 MCP 10de:0064 | |
| * nForce2 Ultra 400 MCP 10de:0084 | |
| * nForce3 Pro150 MCP 10de:00D4 | |
| * nForce3 250Gb MCP 10de:00E4 | |
| * nForce4 MCP 10de:0052 | |
| * nForce4 MCP-04 10de:0034 | |
| * nForce MCP51 10de:0264 | |
| * nForce MCP55 10de:0368 | |
| * nForce MCP61 10de:03EB | |
| * nForce MCP65 10de:0446 | |
| * nForce MCP67 10de:0542 | |
| * nForce MCP73 10de:07D8 | |
| * nForce MCP78S 10de:0752 | |
| * nForce MCP79 10de:0AA2 | |
| Datasheet: not publicly available, but seems to be similar to the | |
| AMD-8111 SMBus 2.0 adapter. | |
| Authors: | |
| Hans-Frieder Vogt <hfvogt@gmx.net>, | |
| Thomas Leibold <thomas@plx.com>, | |
| Patrick Dreker <patrick@dreker.de> | |
| Description | |
| ----------- | |
| i2c-nforce2 is a driver for the SMBuses included in the nVidia nForce2 MCP. | |
| If your 'lspci -v' listing shows something like the following, | |
| 00:01.1 SMBus: nVidia Corporation: Unknown device 0064 (rev a2) | |
| Subsystem: Asustek Computer, Inc.: Unknown device 0c11 | |
| Flags: 66Mhz, fast devsel, IRQ 5 | |
| I/O ports at c000 [size=32] | |
| Capabilities: <available only to root> | |
| then this driver should support the SMBuses of your motherboard. | |
| Notes | |
| ----- | |
| The SMBus adapter in the nForce2 chipset seems to be very similar to the | |
| SMBus 2.0 adapter in the AMD-8111 south bridge. However, I could only get | |
| the driver to work with direct I/O access, which is different to the EC | |
| interface of the AMD-8111. Tested on Asus A7N8X. The ACPI DSDT table of the | |
| Asus A7N8X lists two SMBuses, both of which are supported by this driver. |