| # | |
| # PMBus chip drivers configuration | |
| # | |
| menuconfig PMBUS | |
| tristate "PMBus support" | |
| depends on I2C | |
| default n | |
| help | |
| Say yes here if you want to enable PMBus support. | |
| This driver can also be built as a module. If so, the module will | |
| be called pmbus_core. | |
| if PMBUS | |
| config SENSORS_PMBUS | |
| tristate "Generic PMBus devices" | |
| default y | |
| help | |
| If you say yes here you get hardware monitoring support for generic | |
| PMBus devices, including but not limited to ADP4000, BMR453, BMR454, | |
| MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, UDT020, TPS40400, | |
| and TPS40422. | |
| This driver can also be built as a module. If so, the module will | |
| be called pmbus. | |
| config SENSORS_ADM1275 | |
| tristate "Analog Devices ADM1275 and compatibles" | |
| default n | |
| help | |
| If you say yes here you get hardware monitoring support for Analog | |
| Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital | |
| Power Monitors. | |
| This driver can also be built as a module. If so, the module will | |
| be called adm1275. | |
| config SENSORS_LM25066 | |
| tristate "National Semiconductor LM25066 and compatibles" | |
| default n | |
| help | |
| If you say yes here you get hardware monitoring support for National | |
| Semiconductor LM25056, LM25066, LM5064, and LM5066. | |
| This driver can also be built as a module. If so, the module will | |
| be called lm25066. | |
| config SENSORS_LTC2978 | |
| tristate "Linear Technologies LTC2974, LTC2978, LTC3880, and LTC3883" | |
| default n | |
| help | |
| If you say yes here you get hardware monitoring support for Linear | |
| Technology LTC2974, LTC2978, LTC3880, and LTC3883. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2978. | |
| config SENSORS_MAX16064 | |
| tristate "Maxim MAX16064" | |
| default n | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX16064. | |
| This driver can also be built as a module. If so, the module will | |
| be called max16064. | |
| config SENSORS_MAX34440 | |
| tristate "Maxim MAX34440 and compatibles" | |
| default n | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX34440, MAX34441, MAX34446, MAX34460, and MAX34461. | |
| This driver can also be built as a module. If so, the module will | |
| be called max34440. | |
| config SENSORS_MAX8688 | |
| tristate "Maxim MAX8688" | |
| default n | |
| help | |
| If you say yes here you get hardware monitoring support for Maxim | |
| MAX8688. | |
| This driver can also be built as a module. If so, the module will | |
| be called max8688. | |
| config SENSORS_UCD9000 | |
| tristate "TI UCD90120, UCD90124, UCD9090, UCD90910" | |
| default n | |
| help | |
| If you say yes here you get hardware monitoring support for TI | |
| UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health | |
| Controllers. | |
| This driver can also be built as a module. If so, the module will | |
| be called ucd9000. | |
| config SENSORS_UCD9200 | |
| tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248" | |
| default n | |
| help | |
| If you say yes here you get hardware monitoring support for TI | |
| UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 | |
| Digital PWM System Controllers. | |
| This driver can also be built as a module. If so, the module will | |
| be called ucd9200. | |
| config SENSORS_ZL6100 | |
| tristate "Intersil ZL6100 and compatibles" | |
| default n | |
| help | |
| If you say yes here you get hardware monitoring support for Intersil | |
| ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105, | |
| ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for | |
| Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464. | |
| This driver can also be built as a module. If so, the module will | |
| be called zl6100. | |
| endif # PMBUS |