| # The config file for libsysfs testsuite |
| # All values in this file are in relation to the sysfs filesystem only |
| # |
| # Values defined here will be used to dynamically build a header file that |
| # gets used while compiling the testsuite. |
| |
| # NOTE NOTE NOTE: If you change values in this file, please make sure that |
| # you run "make clean" and "make" (in the "test" directory) for the changes |
| # to take effect. |
| |
| |
| # A valid directory path under sysfs |
| # A valid link name under a subidirectory of VALID_DIRECTORY_PATH... eg., if |
| # the VALID_DIRECTORY_PATH is /sys/bus/pci, then enter a pci device name for |
| # VALID SUBDIR_LINK_NAME |
| VALID_DIRECTORY_PATH=/sys/bus/pci |
| VALID_SUBDIR_LINK_NAME=0000:00:00.0 |
| |
| # A valid link path under sysfs - enter the absolute path to a soft-link here |
| VALID_LINK_PATH=/sys/block/sda/device |
| |
| # Absolute path to a regular (readable) attribute (a normal file) under sysfs |
| VALID_FILE_PATH=/sys/block/sda/dev |
| |
| # A valid subsystem name - an entry under /sys |
| VALID_SUBSYSTEM=bus |
| |
| # A valid bus name supported on this system |
| # A device belonging to the bus |
| # Absolute path to the device |
| # A valid attribute defined for this device |
| VALID_BUS_NAME=pci |
| VALID_BUS_ID=0000:00:00.0 |
| VALID_DEVICE_PATH=/sys/devices/pci0000:00/0000:00:00.0 |
| VALID_DEVICE_ATTR=vendor |
| |
| # A valid attribute exported under VALID_BUS_NAME |
| # NOTE: As of now, no buses export attributes, change this to a valid value |
| # when one becomes avaliable |
| VALID_BUS_ATTR=online |
| |
| # A valid directory under /sys/devices |
| # Its absolute path |
| # A valid subdirectory under VALID_ROOT_PATH |
| VALID_ROOT_NAME=pci0000:00 |
| VALID_ROOT_PATH=/sys/devices/pci0000:00 |
| VALID_SUBDIR_NAME=0000:00:00.0 |
| |
| # A valid class - directory under /sys/class |
| # A valid class_device belonging to the class - a dir under VALID_CLASS |
| # Abslolute path to the VALID_CLASS_DEVICE |
| # A valid attribute defined for the VALID_CLASS_DEVICE |
| VALID_CLASS=net |
| VALID_CLASS_DEVICE=eth0 |
| VALID_CLASS_DEVICE_PATH=/sys/class/net/eth0 |
| VALID_CLASS_DEV_ATTR=type |
| |
| # A valid directory path under /sys/block/xxx - preferably a partition |
| VALID_BLOCK_DEV_PATH=/sys/block/hda/hda1 |
| |
| # A valid driver (preferably a driver that exports readable attributes) |
| # The absolute path to the driver |
| # The bus the driver is registered on |
| # A device that is using it and |
| # A valid attribute corresponding to the driver |
| VALID_DRIVER=e100 |
| VALID_DRIVER_PATH=/sys/bus/pci/drivers/e100 |
| VALID_DRIVER_BUS=pci |
| VALID_DRIVER_DEVICE=0000:02:08.0 |
| VALID_DRIVER_ATTR=new_id |
| |
| # Another valid driver - but one that is not being used by any device |
| # Absolute path to the driver |
| # The bus the driver is registered |
| VALID_DRIVER1=usbfs |
| VALID_DRIVER1_PATH=/sys/bus/usb/drivers/usbfs |
| VALID_DRIVER1_BUS=usb |
| |
| # Path to a writable attribute - make sure that the tester has permission to |
| # "write" to the file at VALID_WRITE_ATTR_PATH |
| VALID_WRITE_ATTR_PATH=/sys/class/net/eth0/tx_queue_len |
| |
| VALID_MODULE_PATH=/sys/module/usbcore |
| VALID_MODULE=usbcore |
| VALID_MODULE_ATTRIBUTE=refcnt |
| VALID_MODULE_PARAM=blinkenlights |
| VALID_MODULE_SECTION=__versions |
