blob: c5ed190227743acfb34dc00448c5077cfc70f8b8 [file] [log] [blame]
/*
* (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com
*
* Developed for DENX Software Engineering GmbH
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
/* There are two tests for dsPIC currently implemented:
* 1. dsPIC ready test. Done in board_early_init_f(). Only result verified here.
* 2. dsPIC POST result test. This test gets dsPIC POST codes and version.
*/
#include <post.h>
#include <i2c.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
#define DSPIC_POST_ERROR_REG 0x800
#define DSPIC_SYS_ERROR_REG 0x802
#define DSPIC_SYS_VERSION_REG 0x804
#define DSPIC_FW_VERSION_REG 0x808
#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
/* Verify that dsPIC ready test done early at hw init passed ok */
int dspic_init_post_test(int flags)
{
if (in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) &
CONFIG_SYS_DSPIC_TEST_MASK) {
post_log("dsPIC init test failed\n");
return 1;
}
return 0;
}
#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC1 */
#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2
/* Read a register from the dsPIC. */
int dspic_read(ushort reg, ushort *data)
{
uchar buf[sizeof(*data)];
int rval;
if (i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, 2, buf, 2))
return -1;
rval = i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, sizeof(reg),
buf, sizeof(*data));
*data = (buf[0] << 8) | buf[1];
return rval;
}
/* Verify error codes regs, display version */
int dspic_post_test(int flags)
{
ushort data;
int ret = 0;
post_log("\n");
/* read dspic FW-Version */
if (dspic_read(DSPIC_FW_VERSION_REG, &data)) {
post_log("dsPIC: failed read FW-Version\n");
ret = 1;
} else {
post_log("dsPIC FW-Version: %u.%u\n",
(data >> 8) & 0xFF, data & 0xFF);
}
/* read dspic SYS-Version */
if (dspic_read(DSPIC_SYS_VERSION_REG, &data)) {
post_log("dsPIC: failed read version\n");
ret = 1;
} else {
post_log("dsPIC SYS-Version: %u.%u\n",
(data >> 8) & 0xFF, data & 0xFF);
}
/* read dspic POST error code */
if (dspic_read(DSPIC_POST_ERROR_REG, &data)) {
post_log("dsPIC: failed read POST code\n");
ret = 1;
} else {
post_log("dsPIC POST-ERROR code: 0x%04X\n", data);
}
/* read dspic SYS error code */
if ((data = dspic_read(DSPIC_SYS_ERROR_REG, &data))) {
post_log("dsPIC: failed read system error\n");
ret = 1;
} else {
post_log("dsPIC SYS-ERROR code: 0x%04X\n", data);
}
return ret;
}
#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC2 */