blob: 8019ffe3d3f50db9480999777b95af2640c8e743 [file] [log] [blame]
/*
* EMIF programming
*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* Aneesh V <aneesh@ti.com> for OMAP4
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/emif.h>
#include <asm/arch/sys_proto.h>
#include <asm/utils.h>
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM;
static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN;
static u32 *const emif_sizes = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_SIZE;
#endif
#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
/* Base AC Timing values specified by JESD209-2 for 532MHz operation */
static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
.max_freq = 532000000,
.RL = 8,
.tRPab = 21,
.tRCD = 18,
.tWR = 15,
.tRASmin = 42,
.tRRD = 10,
.tWTRx2 = 15,
.tXSR = 140,
.tXPx2 = 15,
.tRFCab = 130,
.tRTPx2 = 15,
.tCKE = 3,
.tCKESR = 15,
.tZQCS = 90,
.tZQCL = 360,
.tZQINIT = 1000,
.tDQSCKMAXx2 = 11,
.tRASmax = 70,
.tFAW = 50
};
/*
* Min tCK values specified by JESD209-2
* Min tCK specifies the minimum duration of some AC timing parameters in terms
* of the number of cycles. If the calculated number of cycles based on the
* absolute time value is less than the min tCK value, min tCK value should
* be used instead. This typically happens at low frequencies.
*/
static const struct lpddr2_min_tck min_tck_jedec = {
.tRL = 3,
.tRP_AB = 3,
.tRCD = 3,
.tWR = 3,
.tRAS_MIN = 3,
.tRRD = 2,
.tWTR = 2,
.tXP = 2,
.tRTP = 2,
.tCKE = 3,
.tCKESR = 3,
.tFAW = 8
};
static const struct lpddr2_ac_timings const*
jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
&timings_jedec_532_mhz
};
static const struct lpddr2_device_timings jedec_default_timings = {
.ac_timings = jedec_ac_timings,
.min_tck = &min_tck_jedec
};
void emif_get_device_timings(u32 emif_nr,
const struct lpddr2_device_timings **cs0_device_timings,
const struct lpddr2_device_timings **cs1_device_timings)
{
/* Assume Identical devices on EMIF1 & EMIF2 */
*cs0_device_timings = &jedec_default_timings;
*cs1_device_timings = NULL;
}
#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */