| /* |
| * Copyright (C) ST-Ericsson SA 2009 |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| #ifndef __ASM_ARCH_HARDWARE_H |
| #define __ASM_ARCH_HARDWARE_H |
| |
| /* Peripheral clusters */ |
| |
| #define U8500_PER3_BASE 0x80000000 |
| #define U8500_PER2_BASE 0x80110000 |
| #define U8500_PER1_BASE 0x80120000 |
| #define U8500_PER4_BASE 0x80150000 |
| |
| #define U8500_PER6_BASE 0xa03c0000 |
| #define U8500_PER7_BASE 0xa03d0000 |
| #define U8500_PER5_BASE 0xa03e0000 |
| |
| /* GPIO */ |
| |
| #define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000) |
| #define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xE000 + 0x80) |
| |
| #define U8500_GPIO2_BASE (U8500_PER3_BASE + 0xE000) |
| #define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xE000 + 0x80) |
| #define U8500_GPIO4_BASE (U8500_PER3_BASE + 0xE000 + 0x100) |
| #define U8500_GPIO5_BASE (U8500_PER3_BASE + 0xE000 + 0x180) |
| |
| #define U8500_GPIO6_BASE (U8500_PER2_BASE + 0xE000) |
| #define U8500_GPIO7_BASE (U8500_PER2_BASE + 0xE000 + 0x80) |
| |
| #define U8500_GPIO8_BASE (U8500_PER5_BASE + 0x1E000) |
| |
| /* Per7 */ |
| #define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000) |
| |
| /* Per6 */ |
| #define U8500_MTU0_BASE_V1 (U8500_PER6_BASE + 0x6000) |
| #define U8500_MTU1_BASE_V1 (U8500_PER6_BASE + 0x7000) |
| #define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000) |
| |
| /* Per5 */ |
| #define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000) |
| |
| /* Per4 */ |
| #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) |
| #define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) |
| |
| /* Per3 */ |
| #define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000) |
| #define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000) |
| |
| /* Per2 */ |
| #define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000) |
| |
| /* Per1 */ |
| #define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000) |
| #define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000) |
| #define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000) |
| |
| /* Last page of Boot ROM */ |
| #define U8500_BOOTROM_BASE 0x90000000 |
| #define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOTROM_BASE + 0x1FFF4) |
| #define U8500_ASIC_ID_LOC_V2 (U8500_BOOTROM_BASE + 0x1DBF4) |
| |
| /* AB8500 specifics */ |
| |
| /* address bank */ |
| #define AB8500_REGU_CTRL2 0x0004 |
| #define AB8500_MISC 0x0010 |
| |
| /* registers */ |
| #define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A |
| #define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421 |
| #define AB8500_REV_REG 0x1080 |
| |
| #define AB8500_GPIO_SEL2_REG 0x1001 |
| #define AB8500_GPIO_DIR2_REG 0x1011 |
| #define AB8500_GPIO_DIR4_REG 0x1013 |
| #define AB8500_GPIO_SEL4_REG 0x1003 |
| #define AB8500_GPIO_OUT2_REG 0x1021 |
| #define AB8500_GPIO_OUT4_REG 0x1023 |
| |
| #define LDO_VAUX3_ENABLE_MASK 0x3 |
| #define LDO_VAUX3_ENABLE_VAL 0x1 |
| #define LDO_VAUX3_SEL_MASK 0xf |
| #define LDO_VAUX3_SEL_2V9 0xd |
| #define LDO_VAUX3_V2_SEL_MASK 0x7 |
| #define LDO_VAUX3_V2_SEL_2V91 0x7 |
| |
| |
| #endif /* __ASM_ARCH_HARDWARE_H */ |
