blob: e98244b5ed508cae79d5ac97a205b8c2e40bfd89 [file] [log] [blame]
/*
* (C) Copyright 2008-2009
* BuS Elektronik GmbH & Co. KG <www.bus-elektronik.de>
* Jens Scharsig <esw@bus-elektronik.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <exports.h>
#include <net.h>
#include <netdev.h>
#include <nand.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_mc.h>
#include <asm/arch/at91_common.h>
#ifdef CONFIG_STATUS_LED
#include <status_led.h>
#endif
#ifdef CONFIG_VIDEO
#include <bus_vcxk.h>
extern unsigned long display_width;
extern unsigned long display_height;
#endif
#ifdef CONFIG_CMD_NAND
void cpux9k2_nand_hw_init(void);
#endif
DECLARE_GLOBAL_DATA_PTR;
/*
* Miscelaneous platform dependent initialisations
*/
int board_init(void)
{
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
/* Correct IRDA resistor problem / Set PA23_TXD in Output */
writel(ATMEL_PMX_AA_TXD2, &pio->pioa.oer);
gd->bd->bi_arch_number = MACH_TYPE_EB_CPUX9K2;
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifdef CONFIG_STATUS_LED
status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
#endif
#ifdef CONFIG_CMD_NAND
cpux9k2_nand_hw_init();
#endif
return 0;
}
int board_early_init_f(void)
{
at91_seriald_hw_init();
return 0;
}
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
uchar mac[8];
uchar tm;
uchar midx;
uchar macn6, macn7;
if (getenv("ethaddr") == NULL) {
if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x00,
CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
(uchar *) &mac, sizeof(mac)) != 0) {
puts("Error reading MAC from EEPROM\n");
} else {
tm = 0;
macn6 = 0;
macn7 = 0xFF;
for (midx = 0; midx < 6; midx++) {
if ((mac[midx] != 0) && (mac[midx] != 0xFF))
tm++;
macn6 += mac[midx];
macn7 ^= mac[midx];
}
if ((macn6 != mac[6]) || (macn7 != mac[7]))
tm = 0;
if (tm)
eth_setenv_enetaddr("ethaddr", mac);
else
puts("Error: invalid MAC at EEPROM\n");
}
}
gd->jt[XF_do_reset] = (void *) do_reset;
#ifdef CONFIG_STATUS_LED
status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
#endif
return 0;
}
#endif
#ifdef CONFIG_RESET_PHY_R
void reset_phy(void)
{
udelay(10000);
eth_init(gd->bd);
}
#endif
/*
* DRAM initialisations
*/
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
/*
* Ethernet initialisations
*/
#ifdef CONFIG_DRIVER_AT91EMAC
int board_eth_init(bd_t *bis)
{
int rc = 0;
rc = at91emac_register(bis, (u32) ATMEL_BASE_EMAC);
return rc;
}
#endif
/*
* Disk On Chip (NAND) Millenium initialization.
* The NAND lives in the CS2* space
*/
#if defined(CONFIG_CMD_NAND)
#define MASK_ALE (1 << 22) /* our ALE is AD22 */
#define MASK_CLE (1 << 21) /* our CLE is AD21 */
void cpux9k2_nand_hw_init(void)
{
unsigned long csr;
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
/* Setup Smart Media, fitst enable the address range of CS3 */
writel(readl(&mc->ebi.csa) | AT91_EBI_CSA_CS3A, &mc->ebi.csa);
/* RWH = 1 | RWS = 0 | TDF = 1 | NWS = 3 */
csr = AT91_SMC_CSR_RWHOLD(1) | AT91_SMC_CSR_TDF(1) |
AT91_SMC_CSR_NWS(3) |
AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_8 |
AT91_SMC_CSR_WSEN;
writel(csr, &mc->smc.csr[3]);
writel(ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE, &pio->pioc.asr);
writel(ATMEL_PMX_CA_BFCK | ATMEL_PMX_CA_SMOE | ATMEL_PMX_CA_SMWE,
&pio->pioc.pdr);
/* Configure PC2 as input (signal Nand READY ) */
writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.per);
writel(ATMEL_PMX_CA_BFAVD, &pio->pioc.odr); /* disable output */
writel(ATMEL_PMX_CA_BFCK, &pio->pioc.codr);
/* PIOC clock enabling */
writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
}
static void board_nand_hwcontrol(struct mtd_info *mtd,
int cmd, unsigned int ctrl)
{
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
struct nand_chip *this = mtd->priv;
ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
if (ctrl & NAND_CTRL_CHANGE) {
IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
if (ctrl & NAND_CLE)
IO_ADDR_W |= MASK_CLE;
if (ctrl & NAND_ALE)
IO_ADDR_W |= MASK_ALE;
if ((ctrl & NAND_NCE))
writel(1, &pio->pioc.codr);
else
writel(1, &pio->pioc.sodr);
this->IO_ADDR_W = (void *) IO_ADDR_W;
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
static int board_nand_dev_ready(struct mtd_info *mtd)
{
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
return ((readl(&pio->pioc.pdsr) & (1 << 2)) != 0);
}
int board_nand_init(struct nand_chip *nand)
{
cpux9k2_nand_hw_init();
nand->ecc.mode = NAND_ECC_SOFT;
nand->cmd_ctrl = board_nand_hwcontrol;
nand->dev_ready = board_nand_dev_ready;
nand->chip_delay = 20;
return 0;
}
#endif
#if defined(CONFIG_VIDEO)
/*
* drv_video_init
* FUNCTION: initialize VCxK device
*/
int drv_video_init(void)
{
#ifdef CONFIG_SPLASH_SCREEN
unsigned long splash;
#endif
char *s;
unsigned long csr;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_mc_t *mc = (at91_mc_t *) ATMEL_BASE_MC;
printf("Init Video as ");
s = getenv("displaywidth");
if (s != NULL)
display_width = simple_strtoul(s, NULL, 10);
else
display_width = 256;
s = getenv("displayheight");
if (s != NULL)
display_height = simple_strtoul(s, NULL, 10);
else
display_height = 256;
printf("%ld x %ld pixel matrix\n", display_width, display_height);
/* RWH = 2 | RWS =2 | TDF = 4 | NWS = 0x6 */
csr = AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) |
AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) |
AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 |
AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN;
writel(csr, &mc->smc.csr[2]);
writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
vcxk_init(display_width, display_height);
#ifdef CONFIG_SPLASH_SCREEN
s = getenv("splashimage");
if (s != NULL) {
splash = simple_strtoul(s, NULL, 16);
printf("use splashimage: %lx\n", splash);
video_display_bitmap(splash, 0, 0);
}
#endif
return 0;
}
#endif
#ifdef CONFIG_SOFT_I2C
void i2c_init_board(void)
{
u32 pin;
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
pin = ATMEL_PMX_AA_TWD | ATMEL_PMX_AA_TWCK;
writel(pin, &pio->pioa.idr);
writel(pin, &pio->pioa.pudr);
writel(pin, &pio->pioa.per);
writel(pin, &pio->pioa.oer);
writel(pin, &pio->pioa.sodr);
}
#endif
/*--------------------------------------------------------------------------*/
#ifdef CONFIG_STATUS_LED
void __led_toggle(led_id_t mask)
{
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
if (readl(&pio->piod.odsr) & mask)
writel(mask, &pio->piod.codr);
else
writel(mask, &pio->piod.codr);
}
void __led_init(led_id_t mask, int state)
{
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
writel(1 << ATMEL_ID_PIOD, &pmc->pcer); /* Enable PIOB clock */
/* Disable peripherals on LEDs */
writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.per);
/* Enable pins as outputs */
writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.oer);
/* Turn all LEDs OFF */
writel(STATUS_LED_BIT | STATUS_LED_BIT1, &pio->piod.sodr);
__led_set(mask, state);
}
void __led_set(led_id_t mask, int state)
{
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
if (state == STATUS_LED_ON)
writel(mask, &pio->piod.codr);
else
writel(mask, &pio->piod.sodr);
}
#endif
/*---------------------------------------------------------------------------*/
int do_brightness(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int rcode = 0;
ulong side;
ulong bright;
switch (argc) {
case 3:
side = simple_strtoul(argv[1], NULL, 10);
bright = simple_strtoul(argv[2], NULL, 10);
if ((side >= 0) && (side <= 3) &&
(bright >= 0) && (bright <= 1000)) {
vcxk_setbrightness(side, bright);
rcode = 0;
} else {
printf("parameters out of range\n");
printf("Usage:\n%s\n", cmdtp->usage);
rcode = 1;
}
break;
default:
printf("Usage:\n%s\n", cmdtp->usage);
rcode = 1;
break;
}
return rcode;
}
/*---------------------------------------------------------------------------*/
U_BOOT_CMD(
bright, 3, 0, do_brightness,
"bright - sets the display brightness\n",
" <side> <0..1000>\n side: 0/3=both; 1=first; 2=second\n"
);
/* EOF cpu9k2.c */