blob: b7e6e4107c5be88049fe7133cf3d705cdfc112bf [file] [log] [blame]
/*
* Copyright (C) 2011-2012
* Gerald Kerma <dreagle@doukki.net>
* Luka Perkov <uboot@lukaperkov.net>
* Simon Baatz <gmbnomis@gmail.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <common.h>
#include <miiphy.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
#include "ib62x0.h"
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
/*
* default gpio configuration
* There are maximum 64 gpios controlled through 2 sets of registers
* the below configuration configures mainly initial LED status
*/
kw_config_gpio(IB62x0_OE_VAL_LOW,
IB62x0_OE_VAL_HIGH,
IB62x0_OE_LOW, IB62x0_OE_HIGH);
/* Set SATA activity LEDs to default off */
writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG);
/* Multi-Purpose Pins Functionality configuration */
u32 kwmpp_config[] = {
MPP0_NF_IO2,
MPP1_NF_IO3,
MPP2_NF_IO4,
MPP3_NF_IO5,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_SATA1_ACTn,
MPP21_SATA0_ACTn,
MPP22_GPIO, /* Power LED red */
MPP24_GPIO, /* Power off device */
MPP25_GPIO, /* Power LED green */
MPP27_GPIO, /* USB transfer LED */
MPP28_GPIO, /* Reset button */
MPP29_GPIO, /* USB Copy button */
0
};
kirkwood_mpp_conf(kwmpp_config, NULL);
return 0;
}
int board_init(void)
{
/* adress of boot parameters */
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
return 0;
}