blob: 94cccca52c1b0e855f8fe08ea9d14e77b4f14b33 [file] [log] [blame]
/*
* Machine Specific Values for ORIGEN board based on S5PV310
*
* Copyright (C) 2011 Samsung Electronics
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef _ORIGEN_SETUP_H
#define _ORIGEN_SETUP_H
#include <config.h>
#include <version.h>
#include <asm/arch/cpu.h>
/* Offsets of clock registers (sources and dividers) */
#define CLK_SRC_CPU_OFFSET 0x14200
#define CLK_DIV_CPU0_OFFSET 0x14500
#define CLK_DIV_CPU1_OFFSET 0x14504
#define CLK_SRC_DMC_OFFSET 0x10200
#define CLK_DIV_DMC0_OFFSET 0x10500
#define CLK_DIV_DMC1_OFFSET 0x10504
#define CLK_SRC_TOP0_OFFSET 0xC210
#define CLK_SRC_TOP1_OFFSET 0xC214
#define CLK_DIV_TOP_OFFSET 0xC510
#define CLK_SRC_LEFTBUS_OFFSET 0x4200
#define CLK_DIV_LEFTBUS_OFFSET 0x4500
#define CLK_SRC_RIGHTBUS_OFFSET 0x8200
#define CLK_DIV_RIGHTBUS_OFFSET 0x8500
#define CLK_SRC_FSYS_OFFSET 0xC240
#define CLK_DIV_FSYS1_OFFSET 0xC544
#define CLK_DIV_FSYS2_OFFSET 0xC548
#define CLK_DIV_FSYS3_OFFSET 0xC54C
#define CLK_SRC_PERIL0_OFFSET 0xC250
#define CLK_DIV_PERIL0_OFFSET 0xC550
#define CLK_SRC_LCD0_OFFSET 0xC234
#define APLL_LOCK_OFFSET 0x14000
#define MPLL_LOCK_OFFSET 0x14008
#define APLL_CON0_OFFSET 0x14100
#define APLL_CON1_OFFSET 0x14104
#define MPLL_CON0_OFFSET 0x14108
#define MPLL_CON1_OFFSET 0x1410C
#define EPLL_LOCK_OFFSET 0xC010
#define VPLL_LOCK_OFFSET 0xC020
#define EPLL_CON0_OFFSET 0xC110
#define EPLL_CON1_OFFSET 0xC114
#define VPLL_CON0_OFFSET 0xC120
#define VPLL_CON1_OFFSET 0xC124
/* DMC: DRAM Controllor Register offsets */
#define DMC_CONCONTROL 0x00
#define DMC_MEMCONTROL 0x04
#define DMC_MEMCONFIG0 0x08
#define DMC_MEMCONFIG1 0x0C
#define DMC_DIRECTCMD 0x10
#define DMC_PRECHCONFIG 0x14
#define DMC_PHYCONTROL0 0x18
#define DMC_PHYCONTROL1 0x1C
#define DMC_PHYCONTROL2 0x20
#define DMC_TIMINGAREF 0x30
#define DMC_TIMINGROW 0x34
#define DMC_TIMINGDATA 0x38
#define DMC_TIMINGPOWER 0x3C
#define DMC_PHYZQCONTROL 0x44
/* Bus Configuration Register Address */
#define ASYNC_CONFIG 0x10010350
/* MIU Config Register Offsets*/
#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
/* Offset for inform registers */
#define INFORM0_OFFSET 0x800
#define INFORM1_OFFSET 0x804
/* GPIO Offsets for UART: GPIO Contol Register */
#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00
#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20
/* UART Register offsets */
#define ULCON_OFFSET 0x00
#define UCON_OFFSET 0x04
#define UFCON_OFFSET 0x08
#define UBRDIV_OFFSET 0x28
#define UFRACVAL_OFFSET 0x2C
/* TZPC : Register Offsets */
#define TZPC0_BASE 0x10110000
#define TZPC1_BASE 0x10120000
#define TZPC2_BASE 0x10130000
#define TZPC3_BASE 0x10140000
#define TZPC4_BASE 0x10150000
#define TZPC5_BASE 0x10160000
#define TZPC_DECPROT0SET_OFFSET 0x804
#define TZPC_DECPROT1SET_OFFSET 0x810
#define TZPC_DECPROT2SET_OFFSET 0x81C
#define TZPC_DECPROT3SET_OFFSET 0x828
/* CLK_SRC_CPU */
#define MUX_HPM_SEL_MOUTAPLL 0x0
#define MUX_HPM_SEL_SCLKMPLL 0x1
#define MUX_CORE_SEL_MOUTAPLL 0x0
#define MUX_CORE_SEL_SCLKMPLL 0x1
#define MUX_MPLL_SEL_FILPLL 0x0
#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1
#define MUX_APLL_SEL_FILPLL 0x0
#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1
#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \
| (MUX_CORE_SEL_MOUTAPLL << 16) \
| (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\
| (MUX_APLL_SEL_MOUTMPLLFOUT << 0))
/* CLK_DIV_CPU0 */
#define APLL_RATIO 0x0
#define PCLK_DBG_RATIO 0x1
#define ATB_RATIO 0x3
#define PERIPH_RATIO 0x3
#define COREM1_RATIO 0x7
#define COREM0_RATIO 0x3
#define CORE_RATIO 0x0
#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \
| (PCLK_DBG_RATIO << 20) \
| (ATB_RATIO << 16) \
| (PERIPH_RATIO << 12) \
| (COREM1_RATIO << 8) \
| (COREM0_RATIO << 4) \
| (CORE_RATIO << 0))
/* CLK_DIV_CPU1 */
#define HPM_RATIO 0x0
#define COPY_RATIO 0x3
#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO))
/* CLK_SRC_DMC */
#define MUX_PWI_SEL_XXTI 0x0
#define MUX_PWI_SEL_XUSBXTI 0x1
#define MUX_PWI_SEL_SCLK_HDMI24M 0x2
#define MUX_PWI_SEL_SCLK_USBPHY0 0x3
#define MUX_PWI_SEL_SCLK_USBPHY1 0x4
#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5
#define MUX_PWI_SEL_SCLKMPLL 0x6
#define MUX_PWI_SEL_SCLKEPLL 0x7
#define MUX_PWI_SEL_SCLKVPLL 0x8
#define MUX_DPHY_SEL_SCLKMPLL 0x0
#define MUX_DPHY_SEL_SCLKAPLL 0x1
#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0
#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1
#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \
| (MUX_DPHY_SEL_SCLKMPLL << 8) \
| (MUX_DMC_BUS_SEL_SCLKMPLL << 4))
/* CLK_DIV_DMC0 */
#define CORE_TIMERS_RATIO 0x1
#define COPY2_RATIO 0x3
#define DMCP_RATIO 0x1
#define DMCD_RATIO 0x1
#define DMC_RATIO 0x1
#define DPHY_RATIO 0x1
#define ACP_PCLK_RATIO 0x1
#define ACP_RATIO 0x3
#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \
| (COPY2_RATIO << 24) \
| (DMCP_RATIO << 20) \
| (DMCD_RATIO << 16) \
| (DMC_RATIO << 12) \
| (DPHY_RATIO << 8) \
| (ACP_PCLK_RATIO << 4) \
| (ACP_RATIO << 0))
/* CLK_DIV_DMC1 */
#define DPM_RATIO 0x1
#define DVSEM_RATIO 0x1
#define PWI_RATIO 0x1
#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \
| (DVSEM_RATIO << 16) \
| (PWI_RATIO << 8))
/* CLK_SRC_TOP0 */
#define MUX_ONENAND_SEL_ACLK_133 0x0
#define MUX_ONENAND_SEL_ACLK_160 0x1
#define MUX_ACLK_133_SEL_SCLKMPLL 0x0
#define MUX_ACLK_133_SEL_SCLKAPLL 0x1
#define MUX_ACLK_160_SEL_SCLKMPLL 0x0
#define MUX_ACLK_160_SEL_SCLKAPLL 0x1
#define MUX_ACLK_100_SEL_SCLKMPLL 0x0
#define MUX_ACLK_100_SEL_SCLKAPLL 0x1
#define MUX_ACLK_200_SEL_SCLKMPLL 0x0
#define MUX_ACLK_200_SEL_SCLKAPLL 0x1
#define MUX_VPLL_SEL_FINPLL 0x0
#define MUX_VPLL_SEL_FOUTVPLL 0x1
#define MUX_EPLL_SEL_FINPLL 0x0
#define MUX_EPLL_SEL_FOUTEPLL 0x1
#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0
#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1
#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \
| (MUX_ACLK_133_SEL_SCLKMPLL << 24) \
| (MUX_ACLK_160_SEL_SCLKMPLL << 20) \
| (MUX_ACLK_100_SEL_SCLKMPLL << 16) \
| (MUX_ACLK_200_SEL_SCLKMPLL << 12) \
| (MUX_VPLL_SEL_FINPLL << 8) \
| (MUX_EPLL_SEL_FINPLL << 4)\
| (MUX_ONENAND_1_SEL_MOUTONENAND << 0))
/* CLK_SRC_TOP1 */
#define VPLLSRC_SEL_FINPLL 0x0
#define VPLLSRC_SEL_SCLKHDMI24M 0x1
#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL)
/* CLK_DIV_TOP */
#define ONENAND_RATIO 0x0
#define ACLK_133_RATIO 0x5
#define ACLK_160_RATIO 0x4
#define ACLK_100_RATIO 0x7
#define ACLK_200_RATIO 0x3
#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \
| (ACLK_133_RATIO << 12)\
| (ACLK_160_RATIO << 8) \
| (ACLK_100_RATIO << 4) \
| (ACLK_200_RATIO << 0))
/* CLK_SRC_LEFTBUS */
#define MUX_GDL_SEL_SCLKMPLL 0x0
#define MUX_GDL_SEL_SCLKAPLL 0x1
#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL)
/* CLK_DIV_LEFTBUS */
#define GPL_RATIO 0x1
#define GDL_RATIO 0x3
#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO))
/* CLK_SRC_RIGHTBUS */
#define MUX_GDR_SEL_SCLKMPLL 0x0
#define MUX_GDR_SEL_SCLKAPLL 0x1
#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL)
/* CLK_DIV_RIGHTBUS */
#define GPR_RATIO 0x1
#define GDR_RATIO 0x3
#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO))
/* CLK_SRS_FSYS: 6 = SCLKMPLL */
#define SATA_SEL_SCLKMPLL 0
#define SATA_SEL_SCLKAPLL 1
#define MMC_SEL_XXTI 0
#define MMC_SEL_XUSBXTI 1
#define MMC_SEL_SCLK_HDMI24M 2
#define MMC_SEL_SCLK_USBPHY0 3
#define MMC_SEL_SCLK_USBPHY1 4
#define MMC_SEL_SCLK_HDMIPHY 5
#define MMC_SEL_SCLKMPLL 6
#define MMC_SEL_SCLKEPLL 7
#define MMC_SEL_SCLKVPLL 8
#define MMCC0_SEL MMC_SEL_SCLKMPLL
#define MMCC1_SEL MMC_SEL_SCLKMPLL
#define MMCC2_SEL MMC_SEL_SCLKMPLL
#define MMCC3_SEL MMC_SEL_SCLKMPLL
#define MMCC4_SEL MMC_SEL_SCLKMPLL
#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \
| (MMCC4_SEL << 16) \
| (MMCC3_SEL << 12) \
| (MMCC2_SEL << 8) \
| (MMCC1_SEL << 4) \
| (MMCC0_SEL << 0))
/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */
/* CLK_DIV_FSYS1 */
#define MMC0_RATIO 0xF
#define MMC0_PRE_RATIO 0x0
#define MMC1_RATIO 0xF
#define MMC1_PRE_RATIO 0x0
#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \
| (MMC1_RATIO << 16) \
| (MMC0_PRE_RATIO << 8) \
| (MMC0_RATIO << 0))
/* CLK_DIV_FSYS2 */
#define MMC2_RATIO 0xF
#define MMC2_PRE_RATIO 0x0
#define MMC3_RATIO 0xF
#define MMC3_PRE_RATIO 0x0
#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \
| (MMC3_RATIO << 16) \
| (MMC2_PRE_RATIO << 8) \
| (MMC2_RATIO << 0))
/* CLK_DIV_FSYS3 */
#define MMC4_RATIO 0xF
#define MMC4_PRE_RATIO 0x0
#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \
| (MMC4_RATIO << 0))
/* CLK_SRC_PERIL0 */
#define UART_SEL_XXTI 0
#define UART_SEL_XUSBXTI 1
#define UART_SEL_SCLK_HDMI24M 2
#define UART_SEL_SCLK_USBPHY0 3
#define UART_SEL_SCLK_USBPHY1 4
#define UART_SEL_SCLK_HDMIPHY 5
#define UART_SEL_SCLKMPLL 6
#define UART_SEL_SCLKEPLL 7
#define UART_SEL_SCLKVPLL 8
#define UART0_SEL UART_SEL_SCLKMPLL
#define UART1_SEL UART_SEL_SCLKMPLL
#define UART2_SEL UART_SEL_SCLKMPLL
#define UART3_SEL UART_SEL_SCLKMPLL
#define UART4_SEL UART_SEL_SCLKMPLL
#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \
| (UART3_SEL << 12) \
| (UART2_SEL << 8) \
| (UART1_SEL << 4) \
| (UART0_SEL << 0))
/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */
/* CLK_DIV_PERIL0 */
#define UART0_RATIO 7
#define UART1_RATIO 7
#define UART2_RATIO 7
#define UART3_RATIO 7
#define UART4_RATIO 7
#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \
| (UART3_RATIO << 12) \
| (UART2_RATIO << 8) \
| (UART1_RATIO << 4) \
| (UART0_RATIO << 0))
/* CLK_SRC_LCD0 */
#define FIMD_SEL_SCLKMPLL 6
#define MDNIE0_SEL_XUSBXTI 1
#define MDNIE_PWM0_SEL_XUSBXTI 1
#define MIPI0_SEL_XUSBXTI 1
#define CLK_SRC_LCD0_VAL ((MIPI0_SEL_XUSBXTI << 12) \
| (MDNIE_PWM0_SEL_XUSBXTI << 8) \
| (MDNIE0_SEL_XUSBXTI << 4) \
| (FIMD_SEL_SCLKMPLL << 0))
/* Required period to generate a stable clock output */
/* PLL_LOCK_TIME */
#define PLL_LOCKTIME 0x1C20
/* PLL Values */
#define DISABLE 0
#define ENABLE 1
#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\
| (mdiv << 16) \
| (pdiv << 8) \
| (sdiv << 0))
/* APLL_CON0 */
#define APLL_MDIV 0xFA
#define APLL_PDIV 0x6
#define APLL_SDIV 0x1
#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV)
/* APLL_CON1 */
#define APLL_AFC_ENB 0x1
#define APLL_AFC 0xC
#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0))
/* MPLL_CON0 */
#define MPLL_MDIV 0xC8
#define MPLL_PDIV 0x6
#define MPLL_SDIV 0x1
#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
/* MPLL_CON1 */
#define MPLL_AFC_ENB 0x0
#define MPLL_AFC 0x1C
#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0))
/* EPLL_CON0 */
#define EPLL_MDIV 0x30
#define EPLL_PDIV 0x3
#define EPLL_SDIV 0x2
#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
/* EPLL_CON1 */
#define EPLL_K 0x0
#define EPLL_CON1_VAL (EPLL_K >> 0)
/* VPLL_CON0 */
#define VPLL_MDIV 0x35
#define VPLL_PDIV 0x3
#define VPLL_SDIV 0x2
#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
/* VPLL_CON1 */
#define VPLL_SSCG_EN DISABLE
#define VPLL_SEL_PF_DN_SPREAD 0x0
#define VPLL_MRR 0x11
#define VPLL_MFR 0x0
#define VPLL_K 0x400
#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\
| (VPLL_SEL_PF_DN_SPREAD << 29) \
| (VPLL_MRR << 24) \
| (VPLL_MFR << 16) \
| (VPLL_K << 0))
/*
* UART GPIO_A0/GPIO_A1 Control Register Value
* 0x2: UART Function
*/
#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222
#define EXYNOS4_GPIO_A1_CON_VAL 0x222222
/* ULCON: UART Line Control Value 8N1 */
#define WORD_LEN_5_BIT 0x00
#define WORD_LEN_6_BIT 0x01
#define WORD_LEN_7_BIT 0x02
#define WORD_LEN_8_BIT 0x03
#define STOP_BIT_1 0x00
#define STOP_BIT_2 0x01
#define NO_PARITY 0x00
#define ODD_PARITY 0x4
#define EVEN_PARITY 0x5
#define FORCED_PARITY_CHECK_AS_1 0x6
#define FORCED_PARITY_CHECK_AS_0 0x7
#define INFRAMODE_NORMAL 0x00
#define INFRAMODE_INFRARED 0x01
#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \
| (NO_PARITY << 3) \
| (STOP_BIT_1 << 2) \
| (WORD_LEN_8_BIT << 0))
/*
* UCON: UART Control Value
* Tx_interrupt Type: Level
* Rx_interrupt Type: Level
* Rx Timeout Enabled: Yes
* Rx-Error Atatus_Int Enable: Yes
* Loop_Back: No
* Break Signal: No
* Transmit mode : Interrupt request/polling
* Receive mode : Interrupt request/polling
*/
#define TX_PULSE_INTERRUPT 0
#define TX_LEVEL_INTERRUPT 1
#define RX_PULSE_INTERRUPT 0
#define RX_LEVEL_INTERRUPT 1
#define RX_TIME_OUT ENABLE
#define RX_ERROR_STATE_INT_ENB ENABLE
#define LOOP_BACK DISABLE
#define BREAK_SIGNAL DISABLE
#define TX_MODE_DISABLED 0X00
#define TX_MODE_IRQ_OR_POLL 0X01
#define TX_MODE_DMA 0X02
#define RX_MODE_DISABLED 0X00
#define RX_MODE_IRQ_OR_POLL 0X01
#define RX_MODE_DMA 0X02
#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \
| (RX_LEVEL_INTERRUPT << 8) \
| (RX_TIME_OUT << 7) \
| (RX_ERROR_STATE_INT_ENB << 6) \
| (LOOP_BACK << 5) \
| (BREAK_SIGNAL << 4) \
| (TX_MODE_IRQ_OR_POLL << 2) \
| (RX_MODE_IRQ_OR_POLL << 0))
/*
* UFCON: UART FIFO Control Value
* Tx FIFO Trigger LEVEL: 2 Bytes (001)
* Rx FIFO Trigger LEVEL: 2 Bytes (001)
* Tx Fifo Reset: No
* Rx Fifo Reset: No
* FIFO Enable: Yes
*/
#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00
#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1
#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2
#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3
#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4
#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5
#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6
#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7
#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0
#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1
#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2
#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3
#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4
#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5
#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6
#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7
#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES
#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES
#define TX_FIFO_RESET DISABLE
#define RX_FIFO_RESET DISABLE
#define FIFO_ENABLE ENABLE
#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \
| (RX_FIFO_TRIGGER_LEVEL << 4) \
| (TX_FIFO_RESET << 2) \
| (RX_FIFO_RESET << 1) \
| (FIFO_ENABLE << 0))
/*
* Baud Rate Division Value
* 115200 BAUD:
* UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1)
* UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1)
*/
#define UBRDIV_VAL 0x35
/*
* Fractional Part of Baud Rate Divisor:
* 115200 BAUD:
* UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10)
* UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
*/
#define UFRACVAL_VAL 0x4
/*
* TZPC Register Value :
* R0SIZE: 0x0 : Size of secured ram
*/
#define R0SIZE 0x0
/*
* TZPC Decode Protection Register Value :
* DECPROTXSET: 0xFF : Set Decode region to non-secure
*/
#define DECPROTXSET 0xFF
#endif