blob: 45c7527de9d63acc909965fc0cc73c88aa296634 [file] [log] [blame]
/**
* @file IxDmaAcc.h
*
* @date 15 October 2002
*
* @brief API of the IXP400 DMA Access Driver Component (IxDma)
*
*
* @par
* IXP400 SW Release version 2.0
*
* -- Copyright Notice --
*
* @par
* Copyright 2001-2005, Intel Corporation.
* All rights reserved.
*
* @par
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Intel Corporation nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* @par
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @par
* -- End of Copyright Notice --
*/
/*---------------------------------------------------------------------
Doxygen group definitions
---------------------------------------------------------------------*/
#ifndef IXDMAACC_H
#define IXDMAACC_H
#include "IxOsal.h"
#include "IxNpeDl.h"
/**
* @defgroup IxDmaTypes IXP400 DMA Types (IxDmaTypes)
* @brief The common set of types used in the DMA component
* @{
*/
/**
* @ingroup IxDmaTypes
* @enum IxDmaReturnStatus
* @brief Dma return status definitions
*/
typedef enum
{
IX_DMA_SUCCESS = IX_SUCCESS, /**< DMA Transfer Success */
IX_DMA_FAIL = IX_FAIL, /**< DMA Transfer Fail */
IX_DMA_INVALID_TRANSFER_WIDTH, /**< Invalid transfer width */
IX_DMA_INVALID_TRANSFER_LENGTH, /**< Invalid transfer length */
IX_DMA_INVALID_TRANSFER_MODE, /**< Invalid transfer mode */
IX_DMA_INVALID_ADDRESS_MODE, /**< Invalid address mode */
IX_DMA_REQUEST_FIFO_FULL /**< DMA request queue is full */
} IxDmaReturnStatus;
/**
* @ingroup IxDmaTypes
* @enum IxDmaTransferMode
* @brief Dma transfer mode definitions
* @note Copy and byte swap, and copy and reverse modes only support multiples of word data length.
*/
typedef enum
{
IX_DMA_COPY_CLEAR = 0, /**< copy and clear source*/
IX_DMA_COPY, /**< copy */
IX_DMA_COPY_BYTE_SWAP, /**< copy and byte swap (endian) */
IX_DMA_COPY_REVERSE, /**< copy and reverse */
IX_DMA_TRANSFER_MODE_INVALID /**< Invalid transfer mode */
} IxDmaTransferMode;
/**
* @ingroup IxDmaTypes
* @enum IxDmaAddressingMode
* @brief Dma addressing mode definitions
* @note Fixed source address to fixed destination address addressing mode is not supported.
*/
typedef enum
{
IX_DMA_INC_SRC_INC_DST = 0, /**< Incremental source address to incremental destination address */
IX_DMA_INC_SRC_FIX_DST, /**< Incremental source address to incremental destination address */
IX_DMA_FIX_SRC_INC_DST, /**< Incremental source address to incremental destination address */
IX_DMA_FIX_SRC_FIX_DST, /**< Incremental source address to incremental destination address */
IX_DMA_ADDRESSING_MODE_INVALID /**< Invalid Addressing Mode */
} IxDmaAddressingMode;
/**
* @ingroup IxDmaTypes
* @enum IxDmaTransferWidth
* @brief Dma transfer width definitions
* @Note Fixed addresses (either source or destination) do not support burst transfer width.
*/
typedef enum
{
IX_DMA_32_SRC_32_DST = 0, /**< 32-bit src to 32-bit dst */
IX_DMA_32_SRC_16_DST, /**< 32-bit src to 16-bit dst */
IX_DMA_32_SRC_8_DST, /**< 32-bit src to 8-bit dst */
IX_DMA_16_SRC_32_DST, /**< 16-bit src to 32-bit dst */
IX_DMA_16_SRC_16_DST, /**< 16-bit src to 16-bit dst */
IX_DMA_16_SRC_8_DST, /**< 16-bit src to 8-bit dst */
IX_DMA_8_SRC_32_DST, /**< 8-bit src to 32-bit dst */
IX_DMA_8_SRC_16_DST, /**< 8-bit src to 16-bit dst */
IX_DMA_8_SRC_8_DST, /**< 8-bit src to 8-bit dst */
IX_DMA_8_SRC_BURST_DST, /**< 8-bit src to burst dst - Not supported for fixed destination address */
IX_DMA_16_SRC_BURST_DST, /**< 16-bit src to burst dst - Not supported for fixed destination address */
IX_DMA_32_SRC_BURST_DST, /**< 32-bit src to burst dst - Not supported for fixed destination address */
IX_DMA_BURST_SRC_8_DST, /**< burst src to 8-bit dst - Not supported for fixed source address */
IX_DMA_BURST_SRC_16_DST, /**< burst src to 16-bit dst - Not supported for fixed source address */
IX_DMA_BURST_SRC_32_DST, /**< burst src to 32-bit dst - Not supported for fixed source address*/
IX_DMA_BURST_SRC_BURST_DST, /**< burst src to burst dst - Not supported for fixed source and destination address
*/
IX_DMA_TRANSFER_WIDTH_INVALID /**< Invalid transfer width */
} IxDmaTransferWidth;
/**
* @ingroup IxDmaTypes
* @enum IxDmaNpeId
* @brief NpeId numbers to identify NPE A, B or C
*/
typedef enum
{
IX_DMA_NPEID_NPEA = 0, /**< Identifies NPE A */
IX_DMA_NPEID_NPEB, /**< Identifies NPE B */
IX_DMA_NPEID_NPEC, /**< Identifies NPE C */
IX_DMA_NPEID_MAX /**< Total Number of NPEs */
} IxDmaNpeId;
/* @} */
/**
* @defgroup IxDmaAcc IXP400 DMA Access Driver (IxDmaAcc) API
*
* @brief The public API for the IXP400 IxDmaAcc component
*
* @{
*/
/**
* @ingroup IxDmaAcc
* @brief DMA Request Id type
*/
typedef UINT32 IxDmaAccRequestId;
/**
* @ingroup IxDmaAcc
* @def IX_DMA_REQUEST_FULL
* @brief DMA request queue is full
* This constant is a return value used to tell the user that the IxDmaAcc
* queue is full.
*
*/
#define IX_DMA_REQUEST_FULL 16
/**
* @ingroup IxDmaAcc
* @brief DMA completion notification
* This function is called to notify a client that the DMA has been completed
* @param status @ref IxDmaReturnStatus [out] - reporting to client
*
*/
typedef void (*IxDmaAccDmaCompleteCallback) (IxDmaReturnStatus status);
/**
* @ingroup IxDmaAcc
*
* @fn ixDmaAccInit(IxNpeDlNpeId npeId)
*
* @brief Initialise the DMA Access component
* This function will initialise the DMA Access component internals
* @param npeId @ref IxNpeDlNpeId [in] - NPE to use for Dma Transfer
* @return @li IX_SUCCESS succesfully initialised the component
* @return @li IX_FAIL Initialisation failed for some unspecified
* internal reason.
*/
PUBLIC IX_STATUS
ixDmaAccInit(IxNpeDlNpeId npeId);
/**
* @ingroup IxDmaAcc
*
* @fn ixDmaAccDmaTransfer(
IxDmaAccDmaCompleteCallback callback,
UINT32 SourceAddr,
UINT32 DestinationAddr,
UINT16 TransferLength,
IxDmaTransferMode TransferMode,
IxDmaAddressingMode AddressingMode,
IxDmaTransferWidth TransferWidth)
*
* @brief Perform DMA transfer
* This function will perform DMA transfer between devices within the
* IXP400 memory map.
* @note The following are restrictions for IxDmaAccDmaTransfer:
* @li The function is non re-entrant.
* @li The function assumes host devices are operating in big-endian mode.
* @li Fixed address does not suport burst transfer width
* @li Fixed source address to fixed destinatiom address mode is not suported
* @li The incrementing source address for expansion bus will not support a burst transfer width and copy and clear mode
*
* @param callback @ref IxDmaAccDmaCompleteCallback [in] - function pointer to be stored and called when the DMA transfer is completed. This cannot be NULL.
* @param SourceAddr UINT32 [in] - Starting address of DMA source. Must be a valid IXP400 memory map address.
* @param DestinationAddr UINT32 [in] - Starting address of DMA destination. Must be a valid IXP400 memory map address.
* @param TransferLength UINT16 [in] - The size of DMA data transfer. The range must be from 1-64Kbyte
* @param TransferMode @ref IxDmaTransferMode [in] - The DMA transfer mode
* @param AddressingMode @ref IxDmaAddressingMode [in] - The DMA addressing mode
* @param TransferWidth @ref IxDmaTransferWidth [in] - The DMA transfer width
*
* @return @li IX_DMA_SUCCESS Notification that the DMA request is succesful
* @return @li IX_DMA_FAIL IxDmaAcc not yet initialised or some internal error has occured
* @return @li IX_DMA_INVALID_TRANSFER_WIDTH Transfer width is nit valid
* @return @li IX_DMA_INVALID_TRANSFER_LENGTH Transfer length outside of valid range
* @return @li IX_DMA_INVALID_TRANSFER_MODE Transfer Mode not valid
* @return @li IX_DMA_REQUEST_FIFO_FULL IxDmaAcc request queue is full
*/
PUBLIC IxDmaReturnStatus
ixDmaAccDmaTransfer(
IxDmaAccDmaCompleteCallback callback,
UINT32 SourceAddr,
UINT32 DestinationAddr,
UINT16 TransferLength,
IxDmaTransferMode TransferMode,
IxDmaAddressingMode AddressingMode,
IxDmaTransferWidth TransferWidth);
/**
* @ingroup IxDmaAcc
*
* @fn ixDmaAccShow(void)
*
* @brief Display some component information for debug purposes
* Show some internal operation information relating to the DMA service.
* At a minimum the following will show.
* - the number of the DMA pend (in queue)
* @param None
* @return @li None
*/
PUBLIC IX_STATUS
ixDmaAccShow(void);
#endif /* IXDMAACC_H */