| /* infback9.c -- inflate deflate64 data using a call-back interface |
| * Copyright (C) 1995-2008 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| #include "zutil.h" |
| #include "infback9.h" |
| #include "inftree9.h" |
| #include "inflate9.h" |
| |
| #define WSIZE 65536UL |
| |
| /* |
| strm provides memory allocation functions in zalloc and zfree, or |
| Z_NULL to use the library memory allocation functions. |
| |
| window is a user-supplied window and output buffer that is 64K bytes. |
| */ |
| int ZEXPORT inflateBack9Init_(strm, window, version, stream_size) |
| z_stream FAR *strm; |
| unsigned char FAR *window; |
| const char *version; |
| int stream_size; |
| { |
| struct inflate_state FAR *state; |
| |
| if (version == Z_NULL || version[0] != ZLIB_VERSION[0] || |
| stream_size != (int)(sizeof(z_stream))) |
| return Z_VERSION_ERROR; |
| if (strm == Z_NULL || window == Z_NULL) |
| return Z_STREAM_ERROR; |
| strm->msg = Z_NULL; /* in case we return an error */ |
| if (strm->zalloc == (alloc_func)0) { |
| strm->zalloc = zcalloc; |
| strm->opaque = (voidpf)0; |
| } |
| if (strm->zfree == (free_func)0) strm->zfree = zcfree; |
| state = (struct inflate_state FAR *)ZALLOC(strm, 1, |
| sizeof(struct inflate_state)); |
| if (state == Z_NULL) return Z_MEM_ERROR; |
| Tracev((stderr, "inflate: allocated\n")); |
| strm->state = (voidpf)state; |
| state->window = window; |
| return Z_OK; |
| } |
| |
| /* |
| Build and output length and distance decoding tables for fixed code |
| decoding. |
| */ |
| #ifdef MAKEFIXED |
| #include <stdio.h> |
| |
| void makefixed9(void) |
| { |
| unsigned sym, bits, low, size; |
| code *next, *lenfix, *distfix; |
| struct inflate_state state; |
| code fixed[544]; |
| |
| /* literal/length table */ |
| sym = 0; |
| while (sym < 144) state.lens[sym++] = 8; |
| while (sym < 256) state.lens[sym++] = 9; |
| while (sym < 280) state.lens[sym++] = 7; |
| while (sym < 288) state.lens[sym++] = 8; |
| next = fixed; |
| lenfix = next; |
| bits = 9; |
| inflate_table9(LENS, state.lens, 288, &(next), &(bits), state.work); |
| |
| /* distance table */ |
| sym = 0; |
| while (sym < 32) state.lens[sym++] = 5; |
| distfix = next; |
| bits = 5; |
| inflate_table9(DISTS, state.lens, 32, &(next), &(bits), state.work); |
| |
| /* write tables */ |
| puts(" /* inffix9.h -- table for decoding deflate64 fixed codes"); |
| puts(" * Generated automatically by makefixed9()."); |
| puts(" */"); |
| puts(""); |
| puts(" /* WARNING: this file should *not* be used by applications."); |
| puts(" It is part of the implementation of this library and is"); |
| puts(" subject to change. Applications should only use zlib.h."); |
| puts(" */"); |
| puts(""); |
| size = 1U << 9; |
| printf(" static const code lenfix[%u] = {", size); |
| low = 0; |
| for (;;) { |
| if ((low % 6) == 0) printf("\n "); |
| printf("{%u,%u,%d}", lenfix[low].op, lenfix[low].bits, |
| lenfix[low].val); |
| if (++low == size) break; |
| putchar(','); |
| } |
| puts("\n };"); |
| size = 1U << 5; |
| printf("\n static const code distfix[%u] = {", size); |
| low = 0; |
| for (;;) { |
| if ((low % 5) == 0) printf("\n "); |
| printf("{%u,%u,%d}", distfix[low].op, distfix[low].bits, |
| distfix[low].val); |
| if (++low == size) break; |
| putchar(','); |
| } |
| puts("\n };"); |
| } |
| #endif /* MAKEFIXED */ |
| |
| /* Macros for inflateBack(): */ |
| |
| /* Clear the input bit accumulator */ |
| #define INITBITS() \ |
| do { \ |
| hold = 0; \ |
| bits = 0; \ |
| } while (0) |
| |
| /* Assure that some input is available. If input is requested, but denied, |
| then return a Z_BUF_ERROR from inflateBack(). */ |
| #define PULL() \ |
| do { \ |
| if (have == 0) { \ |
| have = in(in_desc, &next); \ |
| if (have == 0) { \ |
| next = Z_NULL; \ |
| ret = Z_BUF_ERROR; \ |
| goto inf_leave; \ |
| } \ |
| } \ |
| } while (0) |
| |
| /* Get a byte of input into the bit accumulator, or return from inflateBack() |
| with an error if there is no input available. */ |
| #define PULLBYTE() \ |
| do { \ |
| PULL(); \ |
| have--; \ |
| hold += (unsigned long)(*next++) << bits; \ |
| bits += 8; \ |
| } while (0) |
| |
| /* Assure that there are at least n bits in the bit accumulator. If there is |
| not enough available input to do that, then return from inflateBack() with |
| an error. */ |
| #define NEEDBITS(n) \ |
| do { \ |
| while (bits < (unsigned)(n)) \ |
| PULLBYTE(); \ |
| } while (0) |
| |
| /* Return the low n bits of the bit accumulator (n <= 16) */ |
| #define BITS(n) \ |
| ((unsigned)hold & ((1U << (n)) - 1)) |
| |
| /* Remove n bits from the bit accumulator */ |
| #define DROPBITS(n) \ |
| do { \ |
| hold >>= (n); \ |
| bits -= (unsigned)(n); \ |
| } while (0) |
| |
| /* Remove zero to seven bits as needed to go to a byte boundary */ |
| #define BYTEBITS() \ |
| do { \ |
| hold >>= bits & 7; \ |
| bits -= bits & 7; \ |
| } while (0) |
| |
| /* Assure that some output space is available, by writing out the window |
| if it's full. If the write fails, return from inflateBack() with a |
| Z_BUF_ERROR. */ |
| #define ROOM() \ |
| do { \ |
| if (left == 0) { \ |
| put = window; \ |
| left = WSIZE; \ |
| wrap = 1; \ |
| if (out(out_desc, put, (unsigned)left)) { \ |
| ret = Z_BUF_ERROR; \ |
| goto inf_leave; \ |
| } \ |
| } \ |
| } while (0) |
| |
| /* |
| strm provides the memory allocation functions and window buffer on input, |
| and provides information on the unused input on return. For Z_DATA_ERROR |
| returns, strm will also provide an error message. |
| |
| in() and out() are the call-back input and output functions. When |
| inflateBack() needs more input, it calls in(). When inflateBack() has |
| filled the window with output, or when it completes with data in the |
| window, it calls out() to write out the data. The application must not |
| change the provided input until in() is called again or inflateBack() |
| returns. The application must not change the window/output buffer until |
| inflateBack() returns. |
| |
| in() and out() are called with a descriptor parameter provided in the |
| inflateBack() call. This parameter can be a structure that provides the |
| information required to do the read or write, as well as accumulated |
| information on the input and output such as totals and check values. |
| |
| in() should return zero on failure. out() should return non-zero on |
| failure. If either in() or out() fails, than inflateBack() returns a |
| Z_BUF_ERROR. strm->next_in can be checked for Z_NULL to see whether it |
| was in() or out() that caused in the error. Otherwise, inflateBack() |
| returns Z_STREAM_END on success, Z_DATA_ERROR for an deflate format |
| error, or Z_MEM_ERROR if it could not allocate memory for the state. |
| inflateBack() can also return Z_STREAM_ERROR if the input parameters |
| are not correct, i.e. strm is Z_NULL or the state was not initialized. |
| */ |
| int ZEXPORT inflateBack9(strm, in, in_desc, out, out_desc) |
| z_stream FAR *strm; |
| in_func in; |
| void FAR *in_desc; |
| out_func out; |
| void FAR *out_desc; |
| { |
| struct inflate_state FAR *state; |
| unsigned char FAR *next; /* next input */ |
| unsigned char FAR *put; /* next output */ |
| unsigned have; /* available input */ |
| unsigned long left; /* available output */ |
| inflate_mode mode; /* current inflate mode */ |
| int lastblock; /* true if processing last block */ |
| int wrap; /* true if the window has wrapped */ |
| unsigned long write; /* window write index */ |
| unsigned char FAR *window; /* allocated sliding window, if needed */ |
| unsigned long hold; /* bit buffer */ |
| unsigned bits; /* bits in bit buffer */ |
| unsigned extra; /* extra bits needed */ |
| unsigned long length; /* literal or length of data to copy */ |
| unsigned long offset; /* distance back to copy string from */ |
| unsigned long copy; /* number of stored or match bytes to copy */ |
| unsigned char FAR *from; /* where to copy match bytes from */ |
| code const FAR *lencode; /* starting table for length/literal codes */ |
| code const FAR *distcode; /* starting table for distance codes */ |
| unsigned lenbits; /* index bits for lencode */ |
| unsigned distbits; /* index bits for distcode */ |
| code here; /* current decoding table entry */ |
| code last; /* parent table entry */ |
| unsigned len; /* length to copy for repeats, bits to drop */ |
| int ret; /* return code */ |
| static const unsigned short order[19] = /* permutation of code lengths */ |
| {16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}; |
| #include "inffix9.h" |
| |
| /* Check that the strm exists and that the state was initialized */ |
| if (strm == Z_NULL || strm->state == Z_NULL) |
| return Z_STREAM_ERROR; |
| state = (struct inflate_state FAR *)strm->state; |
| |
| /* Reset the state */ |
| strm->msg = Z_NULL; |
| mode = TYPE; |
| lastblock = 0; |
| write = 0; |
| wrap = 0; |
| window = state->window; |
| next = strm->next_in; |
| have = next != Z_NULL ? strm->avail_in : 0; |
| hold = 0; |
| bits = 0; |
| put = window; |
| left = WSIZE; |
| lencode = Z_NULL; |
| distcode = Z_NULL; |
| |
| /* Inflate until end of block marked as last */ |
| for (;;) |
| switch (mode) { |
| case TYPE: |
| /* determine and dispatch block type */ |
| if (lastblock) { |
| BYTEBITS(); |
| mode = DONE; |
| break; |
| } |
| NEEDBITS(3); |
| lastblock = BITS(1); |
| DROPBITS(1); |
| switch (BITS(2)) { |
| case 0: /* stored block */ |
| Tracev((stderr, "inflate: stored block%s\n", |
| lastblock ? " (last)" : "")); |
| mode = STORED; |
| break; |
| case 1: /* fixed block */ |
| lencode = lenfix; |
| lenbits = 9; |
| distcode = distfix; |
| distbits = 5; |
| Tracev((stderr, "inflate: fixed codes block%s\n", |
| lastblock ? " (last)" : "")); |
| mode = LEN; /* decode codes */ |
| break; |
| case 2: /* dynamic block */ |
| Tracev((stderr, "inflate: dynamic codes block%s\n", |
| lastblock ? " (last)" : "")); |
| mode = TABLE; |
| break; |
| case 3: |
| strm->msg = (char *)"invalid block type"; |
| mode = BAD; |
| } |
| DROPBITS(2); |
| break; |
| |
| case STORED: |
| /* get and verify stored block length */ |
| BYTEBITS(); /* go to byte boundary */ |
| NEEDBITS(32); |
| if ((hold & 0xffff) != ((hold >> 16) ^ 0xffff)) { |
| strm->msg = (char *)"invalid stored block lengths"; |
| mode = BAD; |
| break; |
| } |
| length = (unsigned)hold & 0xffff; |
| Tracev((stderr, "inflate: stored length %lu\n", |
| length)); |
| INITBITS(); |
| |
| /* copy stored block from input to output */ |
| while (length != 0) { |
| copy = length; |
| PULL(); |
| ROOM(); |
| if (copy > have) copy = have; |
| if (copy > left) copy = left; |
| zmemcpy(put, next, copy); |
| have -= copy; |
| next += copy; |
| left -= copy; |
| put += copy; |
| length -= copy; |
| } |
| Tracev((stderr, "inflate: stored end\n")); |
| mode = TYPE; |
| break; |
| |
| case TABLE: |
| /* get dynamic table entries descriptor */ |
| NEEDBITS(14); |
| state->nlen = BITS(5) + 257; |
| DROPBITS(5); |
| state->ndist = BITS(5) + 1; |
| DROPBITS(5); |
| state->ncode = BITS(4) + 4; |
| DROPBITS(4); |
| if (state->nlen > 286) { |
| strm->msg = (char *)"too many length symbols"; |
| mode = BAD; |
| break; |
| } |
| Tracev((stderr, "inflate: table sizes ok\n")); |
| |
| /* get code length code lengths (not a typo) */ |
| state->have = 0; |
| while (state->have < state->ncode) { |
| NEEDBITS(3); |
| state->lens[order[state->have++]] = (unsigned short)BITS(3); |
| DROPBITS(3); |
| } |
| while (state->have < 19) |
| state->lens[order[state->have++]] = 0; |
| state->next = state->codes; |
| lencode = (code const FAR *)(state->next); |
| lenbits = 7; |
| ret = inflate_table9(CODES, state->lens, 19, &(state->next), |
| &(lenbits), state->work); |
| if (ret) { |
| strm->msg = (char *)"invalid code lengths set"; |
| mode = BAD; |
| break; |
| } |
| Tracev((stderr, "inflate: code lengths ok\n")); |
| |
| /* get length and distance code code lengths */ |
| state->have = 0; |
| while (state->have < state->nlen + state->ndist) { |
| for (;;) { |
| here = lencode[BITS(lenbits)]; |
| if ((unsigned)(here.bits) <= bits) break; |
| PULLBYTE(); |
| } |
| if (here.val < 16) { |
| NEEDBITS(here.bits); |
| DROPBITS(here.bits); |
| state->lens[state->have++] = here.val; |
| } |
| else { |
| if (here.val == 16) { |
| NEEDBITS(here.bits + 2); |
| DROPBITS(here.bits); |
| if (state->have == 0) { |
| strm->msg = (char *)"invalid bit length repeat"; |
| mode = BAD; |
| break; |
| } |
| len = (unsigned)(state->lens[state->have - 1]); |
| copy = 3 + BITS(2); |
| DROPBITS(2); |
| } |
| else if (here.val == 17) { |
| NEEDBITS(here.bits + 3); |
| DROPBITS(here.bits); |
| len = 0; |
| copy = 3 + BITS(3); |
| DROPBITS(3); |
| } |
| else { |
| NEEDBITS(here.bits + 7); |
| DROPBITS(here.bits); |
| len = 0; |
| copy = 11 + BITS(7); |
| DROPBITS(7); |
| } |
| if (state->have + copy > state->nlen + state->ndist) { |
| strm->msg = (char *)"invalid bit length repeat"; |
| mode = BAD; |
| break; |
| } |
| while (copy--) |
| state->lens[state->have++] = (unsigned short)len; |
| } |
| } |
| |
| /* handle error breaks in while */ |
| if (mode == BAD) break; |
| |
| /* check for end-of-block code (better have one) */ |
| if (state->lens[256] == 0) { |
| strm->msg = (char *)"invalid code -- missing end-of-block"; |
| mode = BAD; |
| break; |
| } |
| |
| /* build code tables -- note: do not change the lenbits or distbits |
| values here (9 and 6) without reading the comments in inftree9.h |
| concerning the ENOUGH constants, which depend on those values */ |
| state->next = state->codes; |
| lencode = (code const FAR *)(state->next); |
| lenbits = 9; |
| ret = inflate_table9(LENS, state->lens, state->nlen, |
| &(state->next), &(lenbits), state->work); |
| if (ret) { |
| strm->msg = (char *)"invalid literal/lengths set"; |
| mode = BAD; |
| break; |
| } |
| distcode = (code const FAR *)(state->next); |
| distbits = 6; |
| ret = inflate_table9(DISTS, state->lens + state->nlen, |
| state->ndist, &(state->next), &(distbits), |
| state->work); |
| if (ret) { |
| strm->msg = (char *)"invalid distances set"; |
| mode = BAD; |
| break; |
| } |
| Tracev((stderr, "inflate: codes ok\n")); |
| mode = LEN; |
| |
| case LEN: |
| /* get a literal, length, or end-of-block code */ |
| for (;;) { |
| here = lencode[BITS(lenbits)]; |
| if ((unsigned)(here.bits) <= bits) break; |
| PULLBYTE(); |
| } |
| if (here.op && (here.op & 0xf0) == 0) { |
| last = here; |
| for (;;) { |
| here = lencode[last.val + |
| (BITS(last.bits + last.op) >> last.bits)]; |
| if ((unsigned)(last.bits + here.bits) <= bits) break; |
| PULLBYTE(); |
| } |
| DROPBITS(last.bits); |
| } |
| DROPBITS(here.bits); |
| length = (unsigned)here.val; |
| |
| /* process literal */ |
| if (here.op == 0) { |
| Tracevv((stderr, here.val >= 0x20 && here.val < 0x7f ? |
| "inflate: literal '%c'\n" : |
| "inflate: literal 0x%02x\n", here.val)); |
| ROOM(); |
| *put++ = (unsigned char)(length); |
| left--; |
| mode = LEN; |
| break; |
| } |
| |
| /* process end of block */ |
| if (here.op & 32) { |
| Tracevv((stderr, "inflate: end of block\n")); |
| mode = TYPE; |
| break; |
| } |
| |
| /* invalid code */ |
| if (here.op & 64) { |
| strm->msg = (char *)"invalid literal/length code"; |
| mode = BAD; |
| break; |
| } |
| |
| /* length code -- get extra bits, if any */ |
| extra = (unsigned)(here.op) & 31; |
| if (extra != 0) { |
| NEEDBITS(extra); |
| length += BITS(extra); |
| DROPBITS(extra); |
| } |
| Tracevv((stderr, "inflate: length %lu\n", length)); |
| |
| /* get distance code */ |
| for (;;) { |
| here = distcode[BITS(distbits)]; |
| if ((unsigned)(here.bits) <= bits) break; |
| PULLBYTE(); |
| } |
| if ((here.op & 0xf0) == 0) { |
| last = here; |
| for (;;) { |
| here = distcode[last.val + |
| (BITS(last.bits + last.op) >> last.bits)]; |
| if ((unsigned)(last.bits + here.bits) <= bits) break; |
| PULLBYTE(); |
| } |
| DROPBITS(last.bits); |
| } |
| DROPBITS(here.bits); |
| if (here.op & 64) { |
| strm->msg = (char *)"invalid distance code"; |
| mode = BAD; |
| break; |
| } |
| offset = (unsigned)here.val; |
| |
| /* get distance extra bits, if any */ |
| extra = (unsigned)(here.op) & 15; |
| if (extra != 0) { |
| NEEDBITS(extra); |
| offset += BITS(extra); |
| DROPBITS(extra); |
| } |
| if (offset > WSIZE - (wrap ? 0: left)) { |
| strm->msg = (char *)"invalid distance too far back"; |
| mode = BAD; |
| break; |
| } |
| Tracevv((stderr, "inflate: distance %lu\n", offset)); |
| |
| /* copy match from window to output */ |
| do { |
| ROOM(); |
| copy = WSIZE - offset; |
| if (copy < left) { |
| from = put + copy; |
| copy = left - copy; |
| } |
| else { |
| from = put - offset; |
| copy = left; |
| } |
| if (copy > length) copy = length; |
| length -= copy; |
| left -= copy; |
| do { |
| *put++ = *from++; |
| } while (--copy); |
| } while (length != 0); |
| break; |
| |
| case DONE: |
| /* inflate stream terminated properly -- write leftover output */ |
| ret = Z_STREAM_END; |
| if (left < WSIZE) { |
| if (out(out_desc, window, (unsigned)(WSIZE - left))) |
| ret = Z_BUF_ERROR; |
| } |
| goto inf_leave; |
| |
| case BAD: |
| ret = Z_DATA_ERROR; |
| goto inf_leave; |
| |
| default: /* can't happen, but makes compilers happy */ |
| ret = Z_STREAM_ERROR; |
| goto inf_leave; |
| } |
| |
| /* Return unused input */ |
| inf_leave: |
| strm->next_in = next; |
| strm->avail_in = have; |
| return ret; |
| } |
| |
| int ZEXPORT inflateBack9End(strm) |
| z_stream FAR *strm; |
| { |
| if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0) |
| return Z_STREAM_ERROR; |
| ZFREE(strm, strm->state); |
| strm->state = Z_NULL; |
| Tracev((stderr, "inflate: end\n")); |
| return Z_OK; |
| } |