| /* inftree9.c -- generate Huffman trees for efficient decoding |
| * Copyright (C) 1995-2012 Mark Adler |
| * For conditions of distribution and use, see copyright notice in zlib.h |
| */ |
| |
| #include "zutil.h" |
| #include "inftree9.h" |
| |
| #define MAXBITS 15 |
| |
| const char inflate9_copyright[] = |
| " inflate9 1.2.6 Copyright 1995-2012 Mark Adler "; |
| /* |
| If you use the zlib library in a product, an acknowledgment is welcome |
| in the documentation of your product. If for some reason you cannot |
| include such an acknowledgment, I would appreciate that you keep this |
| copyright string in the executable of your product. |
| */ |
| |
| /* |
| Build a set of tables to decode the provided canonical Huffman code. |
| The code lengths are lens[0..codes-1]. The result starts at *table, |
| whose indices are 0..2^bits-1. work is a writable array of at least |
| lens shorts, which is used as a work area. type is the type of code |
| to be generated, CODES, LENS, or DISTS. On return, zero is success, |
| -1 is an invalid code, and +1 means that ENOUGH isn't enough. table |
| on return points to the next available entry's address. bits is the |
| requested root table index bits, and on return it is the actual root |
| table index bits. It will differ if the request is greater than the |
| longest code or if it is less than the shortest code. |
| */ |
| int inflate_table9(type, lens, codes, table, bits, work) |
| codetype type; |
| unsigned short FAR *lens; |
| unsigned codes; |
| code FAR * FAR *table; |
| unsigned FAR *bits; |
| unsigned short FAR *work; |
| { |
| unsigned len; /* a code's length in bits */ |
| unsigned sym; /* index of code symbols */ |
| unsigned min, max; /* minimum and maximum code lengths */ |
| unsigned root; /* number of index bits for root table */ |
| unsigned curr; /* number of index bits for current table */ |
| unsigned drop; /* code bits to drop for sub-table */ |
| int left; /* number of prefix codes available */ |
| unsigned used; /* code entries in table used */ |
| unsigned huff; /* Huffman code */ |
| unsigned incr; /* for incrementing code, index */ |
| unsigned fill; /* index for replicating entries */ |
| unsigned low; /* low bits for current root entry */ |
| unsigned mask; /* mask for low root bits */ |
| code this; /* table entry for duplication */ |
| code FAR *next; /* next available space in table */ |
| const unsigned short FAR *base; /* base value table to use */ |
| const unsigned short FAR *extra; /* extra bits table to use */ |
| int end; /* use base and extra for symbol > end */ |
| unsigned short count[MAXBITS+1]; /* number of codes of each length */ |
| unsigned short offs[MAXBITS+1]; /* offsets in table for each length */ |
| static const unsigned short lbase[31] = { /* Length codes 257..285 base */ |
| 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, |
| 19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115, |
| 131, 163, 195, 227, 3, 0, 0}; |
| static const unsigned short lext[31] = { /* Length codes 257..285 extra */ |
| 128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129, |
| 130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132, |
| 133, 133, 133, 133, 144, 203, 69}; |
| static const unsigned short dbase[32] = { /* Distance codes 0..31 base */ |
| 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, |
| 65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073, |
| 4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153}; |
| static const unsigned short dext[32] = { /* Distance codes 0..31 extra */ |
| 128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132, |
| 133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138, |
| 139, 139, 140, 140, 141, 141, 142, 142}; |
| |
| /* |
| Process a set of code lengths to create a canonical Huffman code. The |
| code lengths are lens[0..codes-1]. Each length corresponds to the |
| symbols 0..codes-1. The Huffman code is generated by first sorting the |
| symbols by length from short to long, and retaining the symbol order |
| for codes with equal lengths. Then the code starts with all zero bits |
| for the first code of the shortest length, and the codes are integer |
| increments for the same length, and zeros are appended as the length |
| increases. For the deflate format, these bits are stored backwards |
| from their more natural integer increment ordering, and so when the |
| decoding tables are built in the large loop below, the integer codes |
| are incremented backwards. |
| |
| This routine assumes, but does not check, that all of the entries in |
| lens[] are in the range 0..MAXBITS. The caller must assure this. |
| 1..MAXBITS is interpreted as that code length. zero means that that |
| symbol does not occur in this code. |
| |
| The codes are sorted by computing a count of codes for each length, |
| creating from that a table of starting indices for each length in the |
| sorted table, and then entering the symbols in order in the sorted |
| table. The sorted table is work[], with that space being provided by |
| the caller. |
| |
| The length counts are used for other purposes as well, i.e. finding |
| the minimum and maximum length codes, determining if there are any |
| codes at all, checking for a valid set of lengths, and looking ahead |
| at length counts to determine sub-table sizes when building the |
| decoding tables. |
| */ |
| |
| /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */ |
| for (len = 0; len <= MAXBITS; len++) |
| count[len] = 0; |
| for (sym = 0; sym < codes; sym++) |
| count[lens[sym]]++; |
| |
| /* bound code lengths, force root to be within code lengths */ |
| root = *bits; |
| for (max = MAXBITS; max >= 1; max--) |
| if (count[max] != 0) break; |
| if (root > max) root = max; |
| if (max == 0) return -1; /* no codes! */ |
| for (min = 1; min <= MAXBITS; min++) |
| if (count[min] != 0) break; |
| if (root < min) root = min; |
| |
| /* check for an over-subscribed or incomplete set of lengths */ |
| left = 1; |
| for (len = 1; len <= MAXBITS; len++) { |
| left <<= 1; |
| left -= count[len]; |
| if (left < 0) return -1; /* over-subscribed */ |
| } |
| if (left > 0 && (type == CODES || max != 1)) |
| return -1; /* incomplete set */ |
| |
| /* generate offsets into symbol table for each length for sorting */ |
| offs[1] = 0; |
| for (len = 1; len < MAXBITS; len++) |
| offs[len + 1] = offs[len] + count[len]; |
| |
| /* sort symbols by length, by symbol order within each length */ |
| for (sym = 0; sym < codes; sym++) |
| if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym; |
| |
| /* |
| Create and fill in decoding tables. In this loop, the table being |
| filled is at next and has curr index bits. The code being used is huff |
| with length len. That code is converted to an index by dropping drop |
| bits off of the bottom. For codes where len is less than drop + curr, |
| those top drop + curr - len bits are incremented through all values to |
| fill the table with replicated entries. |
| |
| root is the number of index bits for the root table. When len exceeds |
| root, sub-tables are created pointed to by the root entry with an index |
| of the low root bits of huff. This is saved in low to check for when a |
| new sub-table should be started. drop is zero when the root table is |
| being filled, and drop is root when sub-tables are being filled. |
| |
| When a new sub-table is needed, it is necessary to look ahead in the |
| code lengths to determine what size sub-table is needed. The length |
| counts are used for this, and so count[] is decremented as codes are |
| entered in the tables. |
| |
| used keeps track of how many table entries have been allocated from the |
| provided *table space. It is checked for LENS and DIST tables against |
| the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in |
| the initial root table size constants. See the comments in inftree9.h |
| for more information. |
| |
| sym increments through all symbols, and the loop terminates when |
| all codes of length max, i.e. all codes, have been processed. This |
| routine permits incomplete codes, so another loop after this one fills |
| in the rest of the decoding tables with invalid code markers. |
| */ |
| |
| /* set up for code type */ |
| switch (type) { |
| case CODES: |
| base = extra = work; /* dummy value--not used */ |
| end = 19; |
| break; |
| case LENS: |
| base = lbase; |
| base -= 257; |
| extra = lext; |
| extra -= 257; |
| end = 256; |
| break; |
| default: /* DISTS */ |
| base = dbase; |
| extra = dext; |
| end = -1; |
| } |
| |
| /* initialize state for loop */ |
| huff = 0; /* starting code */ |
| sym = 0; /* starting code symbol */ |
| len = min; /* starting code length */ |
| next = *table; /* current table to fill in */ |
| curr = root; /* current table index bits */ |
| drop = 0; /* current bits to drop from code for index */ |
| low = (unsigned)(-1); /* trigger new sub-table when len > root */ |
| used = 1U << root; /* use root table entries */ |
| mask = used - 1; /* mask for comparing low */ |
| |
| /* check available table space */ |
| if ((type == LENS && used >= ENOUGH_LENS) || |
| (type == DISTS && used >= ENOUGH_DISTS)) |
| return 1; |
| |
| /* process all codes and make table entries */ |
| for (;;) { |
| /* create table entry */ |
| this.bits = (unsigned char)(len - drop); |
| if ((int)(work[sym]) < end) { |
| this.op = (unsigned char)0; |
| this.val = work[sym]; |
| } |
| else if ((int)(work[sym]) > end) { |
| this.op = (unsigned char)(extra[work[sym]]); |
| this.val = base[work[sym]]; |
| } |
| else { |
| this.op = (unsigned char)(32 + 64); /* end of block */ |
| this.val = 0; |
| } |
| |
| /* replicate for those indices with low len bits equal to huff */ |
| incr = 1U << (len - drop); |
| fill = 1U << curr; |
| do { |
| fill -= incr; |
| next[(huff >> drop) + fill] = this; |
| } while (fill != 0); |
| |
| /* backwards increment the len-bit code huff */ |
| incr = 1U << (len - 1); |
| while (huff & incr) |
| incr >>= 1; |
| if (incr != 0) { |
| huff &= incr - 1; |
| huff += incr; |
| } |
| else |
| huff = 0; |
| |
| /* go to next symbol, update count, len */ |
| sym++; |
| if (--(count[len]) == 0) { |
| if (len == max) break; |
| len = lens[work[sym]]; |
| } |
| |
| /* create new sub-table if needed */ |
| if (len > root && (huff & mask) != low) { |
| /* if first time, transition to sub-tables */ |
| if (drop == 0) |
| drop = root; |
| |
| /* increment past last table */ |
| next += 1U << curr; |
| |
| /* determine length of next table */ |
| curr = len - drop; |
| left = (int)(1 << curr); |
| while (curr + drop < max) { |
| left -= count[curr + drop]; |
| if (left <= 0) break; |
| curr++; |
| left <<= 1; |
| } |
| |
| /* check for enough space */ |
| used += 1U << curr; |
| if ((type == LENS && used >= ENOUGH_LENS) || |
| (type == DISTS && used >= ENOUGH_DISTS)) |
| return 1; |
| |
| /* point entry in root table to sub-table */ |
| low = huff & mask; |
| (*table)[low].op = (unsigned char)curr; |
| (*table)[low].bits = (unsigned char)root; |
| (*table)[low].val = (unsigned short)(next - *table); |
| } |
| } |
| |
| /* |
| Fill in rest of table for incomplete codes. This loop is similar to the |
| loop above in incrementing huff for table indices. It is assumed that |
| len is equal to curr + drop, so there is no loop needed to increment |
| through high index bits. When the current sub-table is filled, the loop |
| drops back to the root table to fill in any remaining entries there. |
| */ |
| this.op = (unsigned char)64; /* invalid code marker */ |
| this.bits = (unsigned char)(len - drop); |
| this.val = (unsigned short)0; |
| while (huff != 0) { |
| /* when done with sub-table, drop back to root table */ |
| if (drop != 0 && (huff & mask) != low) { |
| drop = 0; |
| len = root; |
| next = *table; |
| curr = root; |
| this.bits = (unsigned char)len; |
| } |
| |
| /* put invalid code marker in table */ |
| next[huff >> drop] = this; |
| |
| /* backwards increment the len-bit code huff */ |
| incr = 1U << (len - 1); |
| while (huff & incr) |
| incr >>= 1; |
| if (incr != 0) { |
| huff &= incr - 1; |
| huff += incr; |
| } |
| else |
| huff = 0; |
| } |
| |
| /* set return parameters */ |
| *table += used; |
| *bits = root; |
| return 0; |
| } |