| # Makefile.in generated by automake 1.9.6 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005 Free Software Foundation, Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| #*************************************************************************** |
| # _ _ ____ _ |
| # Project ___| | | | _ \| | |
| # / __| | | | |_) | | |
| # | (__| |_| | _ <| |___ |
| # \___|\___/|_| \_\_____| |
| # |
| # Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al. |
| # |
| # This software is licensed as described in the file COPYING, which |
| # you should have received as part of this distribution. The terms |
| # are also available at http://curl.haxx.se/docs/copyright.html. |
| # |
| # You may opt to use, copy, modify, merge, publish, distribute and/or sell |
| # copies of the Software, and permit persons to whom the Software is |
| # furnished to do so, under the terms of the COPYING file. |
| # |
| # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY |
| # KIND, either express or implied. |
| # |
| ########################################################################### |
| |
| |
| srcdir = @srcdir@ |
| top_srcdir = @top_srcdir@ |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| top_builddir = . |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| INSTALL = @INSTALL@ |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ |
| $(srcdir)/Makefile.in $(srcdir)/curl-config.in \ |
| $(srcdir)/libcurl.pc.in $(top_srcdir)/configure COPYING \ |
| compile config.guess config.sub depcomp install-sh ltmain.sh \ |
| missing mkinstalldirs |
| subdir = . |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/curl-compilers.m4 \ |
| $(top_srcdir)/m4/curl-confopts.m4 \ |
| $(top_srcdir)/m4/curl-functions.m4 \ |
| $(top_srcdir)/m4/curl-openssl.m4 \ |
| $(top_srcdir)/m4/curl-override.m4 \ |
| $(top_srcdir)/m4/curl-reentrant.m4 \ |
| $(top_srcdir)/m4/curl-system.m4 $(top_srcdir)/m4/libtool.m4 \ |
| $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ |
| $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ |
| $(top_srcdir)/m4/xc-translit.m4 \ |
| $(top_srcdir)/m4/zz50-xc-ovr.m4 $(top_srcdir)/acinclude.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno configure.status.lineno |
| mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs |
| CONFIG_HEADER = $(top_builddir)/lib/curl_config.h \ |
| $(top_builddir)/src/curl_config.h \ |
| $(top_builddir)/include/curl/curlbuild.h |
| CONFIG_CLEAN_FILES = curl-config libcurl.pc |
| am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)" |
| binSCRIPT_INSTALL = $(INSTALL_SCRIPT) |
| SCRIPTS = $(bin_SCRIPTS) |
| SOURCES = |
| DIST_SOURCES = |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-exec-recursive install-info-recursive \ |
| install-recursive installcheck-recursive installdirs-recursive \ |
| pdf-recursive ps-recursive uninstall-info-recursive \ |
| uninstall-recursive |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; |
| pkgconfigDATA_INSTALL = $(INSTALL_DATA) |
| DATA = $(pkgconfig_DATA) |
| ETAGS = etags |
| CTAGS = ctags |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| { test ! -d $(distdir) \ |
| || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -fr $(distdir); }; } |
| DIST_ARCHIVES = $(distdir).tar.gz |
| GZIP_ENV = --best |
| distuninstallcheck_listfiles = find . -type f -print |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = @ACLOCAL@ |
| AMDEP_FALSE = @AMDEP_FALSE@ |
| AMDEP_TRUE = @AMDEP_TRUE@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AS = @AS@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| BUILD_LIBHOSTNAME_FALSE = @BUILD_LIBHOSTNAME_FALSE@ |
| BUILD_LIBHOSTNAME_TRUE = @BUILD_LIBHOSTNAME_TRUE@ |
| BUILD_UNITTESTS_FALSE = @BUILD_UNITTESTS_FALSE@ |
| BUILD_UNITTESTS_TRUE = @BUILD_UNITTESTS_TRUE@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CONFIGURE_OPTIONS = @CONFIGURE_OPTIONS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CROSSCOMPILING_FALSE = @CROSSCOMPILING_FALSE@ |
| CROSSCOMPILING_TRUE = @CROSSCOMPILING_TRUE@ |
| CURLDEBUG_FALSE = @CURLDEBUG_FALSE@ |
| CURLDEBUG_TRUE = @CURLDEBUG_TRUE@ |
| CURLVERSION = @CURLVERSION@ |
| CURL_CA_BUNDLE = @CURL_CA_BUNDLE@ |
| CURL_CFLAG_EXTRAS = @CURL_CFLAG_EXTRAS@ |
| CURL_DISABLE_DICT = @CURL_DISABLE_DICT@ |
| CURL_DISABLE_FILE = @CURL_DISABLE_FILE@ |
| CURL_DISABLE_FTP = @CURL_DISABLE_FTP@ |
| CURL_DISABLE_GOPHER = @CURL_DISABLE_GOPHER@ |
| CURL_DISABLE_HTTP = @CURL_DISABLE_HTTP@ |
| CURL_DISABLE_IMAP = @CURL_DISABLE_IMAP@ |
| CURL_DISABLE_LDAP = @CURL_DISABLE_LDAP@ |
| CURL_DISABLE_LDAPS = @CURL_DISABLE_LDAPS@ |
| CURL_DISABLE_POP3 = @CURL_DISABLE_POP3@ |
| CURL_DISABLE_PROXY = @CURL_DISABLE_PROXY@ |
| CURL_DISABLE_RTSP = @CURL_DISABLE_RTSP@ |
| CURL_DISABLE_SMTP = @CURL_DISABLE_SMTP@ |
| CURL_DISABLE_TELNET = @CURL_DISABLE_TELNET@ |
| CURL_DISABLE_TFTP = @CURL_DISABLE_TFTP@ |
| CURL_LIBS = @CURL_LIBS@ |
| CURL_NETWORK_LIBS = @CURL_NETWORK_LIBS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DLLTOOL = @DLLTOOL@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| ENABLE_SHARED = @ENABLE_SHARED@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GREP = @GREP@ |
| HAVE_GNUTLS_SRP = @HAVE_GNUTLS_SRP@ |
| HAVE_LDAP_SSL = @HAVE_LDAP_SSL@ |
| HAVE_LIBZ = @HAVE_LIBZ@ |
| HAVE_LIBZ_FALSE = @HAVE_LIBZ_FALSE@ |
| HAVE_LIBZ_TRUE = @HAVE_LIBZ_TRUE@ |
| HAVE_PK11_CREATEGENERICOBJECT = @HAVE_PK11_CREATEGENERICOBJECT@ |
| HAVE_SSLEAY_SRP = @HAVE_SSLEAY_SRP@ |
| IDN_ENABLED = @IDN_ENABLED@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| IPV6_ENABLED = @IPV6_ENABLED@ |
| KRB4_ENABLED = @KRB4_ENABLED@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBCURL_LIBS = @LIBCURL_LIBS@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAINT = @MAINT@ |
| MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@ |
| MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@ |
| MAKEINFO = @MAKEINFO@ |
| MANIFEST_TOOL = @MANIFEST_TOOL@ |
| MANOPT = @MANOPT@ |
| MIMPURE_FALSE = @MIMPURE_FALSE@ |
| MIMPURE_TRUE = @MIMPURE_TRUE@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| NO_UNDEFINED_FALSE = @NO_UNDEFINED_FALSE@ |
| NO_UNDEFINED_TRUE = @NO_UNDEFINED_TRUE@ |
| NROFF = @NROFF@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH = @PATH@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PERL = @PERL@ |
| PKGADD_NAME = @PKGADD_NAME@ |
| PKGADD_PKG = @PKGADD_PKG@ |
| PKGADD_VENDOR = @PKGADD_VENDOR@ |
| PKGCONFIG = @PKGCONFIG@ |
| RANDOM_FILE = @RANDOM_FILE@ |
| RANLIB = @RANLIB@ |
| REQUIRE_LIB_DEPS = @REQUIRE_LIB_DEPS@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| SONAME_BUMP_FALSE = @SONAME_BUMP_FALSE@ |
| SONAME_BUMP_TRUE = @SONAME_BUMP_TRUE@ |
| SSL_ENABLED = @SSL_ENABLED@ |
| STATICLIB_FALSE = @STATICLIB_FALSE@ |
| STATICLIB_TRUE = @STATICLIB_TRUE@ |
| STRIP = @STRIP@ |
| SUPPORT_FEATURES = @SUPPORT_FEATURES@ |
| SUPPORT_PROTOCOLS = @SUPPORT_PROTOCOLS@ |
| TEST_SERVER_LIBS = @TEST_SERVER_LIBS@ |
| USE_ARES = @USE_ARES@ |
| USE_AXTLS = @USE_AXTLS@ |
| USE_CYASSL = @USE_CYASSL@ |
| USE_EMBEDDED_ARES_FALSE = @USE_EMBEDDED_ARES_FALSE@ |
| USE_EMBEDDED_ARES_TRUE = @USE_EMBEDDED_ARES_TRUE@ |
| USE_GNUTLS = @USE_GNUTLS@ |
| USE_GNUTLS_NETTLE = @USE_GNUTLS_NETTLE@ |
| USE_LIBRTMP = @USE_LIBRTMP@ |
| USE_LIBSSH2 = @USE_LIBSSH2@ |
| USE_MANUAL_FALSE = @USE_MANUAL_FALSE@ |
| USE_MANUAL_TRUE = @USE_MANUAL_TRUE@ |
| USE_NSS = @USE_NSS@ |
| USE_OPENLDAP = @USE_OPENLDAP@ |
| USE_POLARSSL = @USE_POLARSSL@ |
| USE_SSLEAY = @USE_SSLEAY@ |
| USE_WINDOWS_SSPI = @USE_WINDOWS_SSPI@ |
| VERSION = @VERSION@ |
| VERSIONED_FLAVOUR = @VERSIONED_FLAVOUR@ |
| VERSIONED_SYMBOLS_FALSE = @VERSIONED_SYMBOLS_FALSE@ |
| VERSIONED_SYMBOLS_TRUE = @VERSIONED_SYMBOLS_TRUE@ |
| VERSIONNUM = @VERSIONNUM@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ |
| am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| libext = @libext@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| subdirs = @subdirs@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| AUTOMAKE_OPTIONS = foreign |
| ACLOCAL_AMFLAGS = -I m4 |
| CMAKE_DIST = CMakeLists.txt CMake/CMakeConfigurableFile.in \ |
| CMake/CurlCheckCSourceCompiles.cmake CMake/CurlCheckCSourceRuns.cmake \ |
| CMake/CurlTests.c CMake/FindOpenSSL.cmake CMake/FindZLIB.cmake \ |
| CMake/OtherTests.cmake CMake/Platforms/WindowsCache.cmake \ |
| CMake/Utilities.cmake include/curl/curlbuild.h.cmake |
| |
| WINBUILD_DIST = winbuild/BUILD.WINDOWS.txt winbuild/gen_resp_file.bat \ |
| winbuild/MakefileBuild.vc winbuild/Makefile.vc |
| |
| EXTRA_DIST = CHANGES COPYING maketgz Makefile.dist curl-config.in \ |
| curl-style.el sample.emacs RELEASE-NOTES buildconf \ |
| libcurl.pc.in vc6curl.dsw MacOSX-Framework Android.mk $(CMAKE_DIST) \ |
| Makefile.msvc.names $(WINBUILD_DIST) lib/libcurl.vers.in |
| |
| bin_SCRIPTS = curl-config |
| SUBDIRS = lib src include |
| DIST_SUBDIRS = $(SUBDIRS) tests packages docs |
| pkgconfigdir = $(libdir)/pkgconfig |
| pkgconfig_DATA = libcurl.pc |
| all: all-recursive |
| |
| .SUFFIXES: |
| am--refresh: |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ |
| cd $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| cd $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| cd $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| curl-config: $(top_builddir)/config.status $(srcdir)/curl-config.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| libcurl.pc: $(top_builddir)/config.status $(srcdir)/libcurl.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| install-binSCRIPTS: $(bin_SCRIPTS) |
| @$(NORMAL_INSTALL) |
| test -z "$(bindir)" || $(mkdir_p) "$(DESTDIR)$(bindir)" |
| @list='$(bin_SCRIPTS)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f $$d$$p; then \ |
| f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ |
| echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \ |
| $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \ |
| else :; fi; \ |
| done |
| |
| uninstall-binSCRIPTS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(bin_SCRIPTS)'; for p in $$list; do \ |
| f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ |
| echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(bindir)/$$f"; \ |
| done |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool |
| uninstall-info-am: |
| install-pkgconfigDATA: $(pkgconfig_DATA) |
| @$(NORMAL_INSTALL) |
| test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)" |
| @list='$(pkgconfig_DATA)'; for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| f=$(am__strip_dir) \ |
| echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ |
| $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ |
| done |
| |
| uninstall-pkgconfigDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(pkgconfig_DATA)'; for p in $$list; do \ |
| f=$(am__strip_dir) \ |
| echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ |
| rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ |
| done |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| mostlyclean-recursive clean-recursive distclean-recursive \ |
| maintainer-clean-recursive: |
| @failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$tags $$unique; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| tags=; \ |
| here=`pwd`; \ |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) ' { files[$$0] = 1; } \ |
| END { for (i in files) print i; }'`; \ |
| test -z "$(CTAGS_ARGS)$$tags$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$tags $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && cd $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) $$here |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| mkdir $(distdir) |
| $(mkdir_p) $(distdir)/. $(distdir)/CMake $(distdir)/CMake/Platforms $(distdir)/include/curl $(distdir)/lib $(distdir)/m4 $(distdir)/packages/AIX/RPM $(distdir)/packages/EPM $(distdir)/packages/Linux/RPM $(distdir)/winbuild |
| @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ |
| list='$(DISTFILES)'; for file in $$list; do \ |
| case $$file in \ |
| $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ |
| $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ |
| esac; \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test "$$dir" != "$$file" && test "$$dir" != "."; then \ |
| dir="/$$dir"; \ |
| $(mkdir_p) "$(distdir)$$dir"; \ |
| else \ |
| dir=''; \ |
| fi; \ |
| if test -d $$d/$$file; then \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ |
| fi; \ |
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ |
| else \ |
| test -f $(distdir)/$$file \ |
| || cp -p $$d/$$file $(distdir)/$$file \ |
| || exit 1; \ |
| fi; \ |
| done |
| list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || $(mkdir_p) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| distdir=`$(am__cd) $(distdir) && pwd`; \ |
| top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ |
| (cd $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$top_distdir" \ |
| distdir="$$distdir/$$subdir" \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-hook |
| -find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r $(distdir) |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| dist-tarZ: distdir |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__remove_distdir) |
| |
| dist-shar: distdir |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__remove_distdir) |
| |
| dist dist-all: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir); chmod a+w $(distdir) |
| mkdir $(distdir)/_build |
| mkdir $(distdir)/_inst |
| chmod a-w $(distdir) |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && cd $(distdir)/_build \ |
| && ../configure --srcdir=.. --prefix="$$dc_install_base" \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck |
| $(am__remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' |
| distuninstallcheck: |
| @cd $(distuninstallcheck_dir) \ |
| && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| check: check-recursive |
| all-am: Makefile $(SCRIPTS) $(DATA) |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"; do \ |
| test -z "$$dir" || $(mkdir_p) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-generic distclean-libtool \ |
| distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-pkgconfigDATA |
| @$(NORMAL_INSTALL) |
| $(MAKE) $(AM_MAKEFLAGS) install-data-hook |
| |
| install-exec-am: install-binSCRIPTS |
| |
| install-info: install-info-recursive |
| |
| install-man: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-binSCRIPTS uninstall-info-am \ |
| uninstall-pkgconfigDATA |
| @$(NORMAL_INSTALL) |
| $(MAKE) $(AM_MAKEFLAGS) uninstall-hook |
| |
| uninstall-info: uninstall-info-recursive |
| |
| .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ |
| check-am clean clean-generic clean-libtool clean-local \ |
| clean-recursive ctags ctags-recursive dist dist-all dist-bzip2 \ |
| dist-gzip dist-hook dist-shar dist-tarZ dist-zip distcheck \ |
| distclean distclean-generic distclean-libtool \ |
| distclean-recursive distclean-tags distcleancheck distdir \ |
| distuninstallcheck dvi dvi-am html html-am info info-am \ |
| install install-am install-binSCRIPTS install-data \ |
| install-data-am install-data-hook install-exec install-exec-am \ |
| install-info install-info-am install-man install-pkgconfigDATA \ |
| install-strip installcheck installcheck-am installdirs \ |
| installdirs-am maintainer-clean maintainer-clean-generic \ |
| maintainer-clean-recursive mostlyclean mostlyclean-generic \ |
| mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ |
| tags tags-recursive uninstall uninstall-am \ |
| uninstall-binSCRIPTS uninstall-hook uninstall-info-am \ |
| uninstall-pkgconfigDATA |
| |
| |
| dist-hook: |
| rm -rf $(top_builddir)/tests/log |
| find $(distdir) -name "*.dist" -exec rm {} \; |
| (distit=`find $(srcdir) -name "*.dist" | grep -v ./ares/`; \ |
| for file in $$distit; do \ |
| strip=`echo $$file | sed -e s/^$(srcdir)// -e s/\.dist//`; \ |
| cp $$file $(distdir)$$strip; \ |
| done) |
| |
| html: |
| cd docs; make html |
| |
| pdf: |
| cd docs; make pdf |
| |
| check: test examples |
| |
| @CROSSCOMPILING_TRUE@test-full: test |
| @CROSSCOMPILING_TRUE@test-torture: test |
| |
| @CROSSCOMPILING_TRUE@test: |
| @CROSSCOMPILING_TRUE@ @echo "NOTICE: we can't run the tests when cross-compiling!" |
| |
| @CROSSCOMPILING_FALSE@test: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all quiet-test) |
| |
| @CROSSCOMPILING_FALSE@test-full: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all full-test) |
| |
| @CROSSCOMPILING_FALSE@test-torture: |
| @CROSSCOMPILING_FALSE@ @(cd tests; $(MAKE) all torture-test) |
| |
| examples: |
| @(cd docs/examples; $(MAKE) check) |
| |
| clean-local: |
| @(cd tests; $(MAKE) clean) |
| @(cd docs; $(MAKE) clean) |
| |
| # |
| # Build source and binary rpms. For rpm-3.0 and above, the ~/.rpmmacros |
| # must contain the following line: |
| # %_topdir /home/loic/local/rpm |
| # and that /home/loic/local/rpm contains the directory SOURCES, BUILD etc. |
| # |
| # cd /home/loic/local/rpm ; mkdir -p SOURCES BUILD RPMS/i386 SPECS SRPMS |
| # |
| # If additional configure flags are needed to build the package, add the |
| # following in ~/.rpmmacros |
| # %configure CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix} ${AM_CONFIGFLAGS} |
| # and run make rpm in the following way: |
| # AM_CONFIGFLAGS='--with-uri=/home/users/loic/local/RedHat-6.2' make rpm |
| # |
| |
| rpms: |
| $(MAKE) RPMDIST=curl rpm |
| $(MAKE) RPMDIST=curl-ssl rpm |
| |
| rpm: |
| RPM_TOPDIR=`rpm --showrc | $(PERL) -n -e 'print if(s/.*_topdir\s+(.*)/$$1/)'` ; \ |
| cp $(srcdir)/packages/Linux/RPM/$(RPMDIST).spec $$RPM_TOPDIR/SPECS ; \ |
| cp $(PACKAGE)-$(VERSION).tar.gz $$RPM_TOPDIR/SOURCES ; \ |
| rpm -ba --clean --rmsource $$RPM_TOPDIR/SPECS/$(RPMDIST).spec ; \ |
| mv $$RPM_TOPDIR/RPMS/i386/$(RPMDIST)-*.rpm . ; \ |
| mv $$RPM_TOPDIR/SRPMS/$(RPMDIST)-*.src.rpm . |
| |
| # |
| # Build a Solaris pkgadd format file |
| # run 'make pkgadd' once you've done './configure' and 'make' to make a Solaris pkgadd format |
| # file (which ends up back in this directory). |
| # The pkgadd file is in 'pkgtrans' format, so to install on Solaris, do |
| # pkgadd -d ./HAXXcurl-* |
| # |
| |
| # gak - libtool requires an absoulte directory, hence the pwd below... |
| pkgadd: |
| umask 022 ; \ |
| make install DESTDIR=`/bin/pwd`/packages/Solaris/root ; \ |
| cat COPYING > $(srcdir)/packages/Solaris/copyright ; \ |
| cd $(srcdir)/packages/Solaris && $(MAKE) package |
| |
| # |
| # Build a cygwin binary tarball installation file |
| # resulting .tar.bz2 file will end up at packages/Win32/cygwin |
| cygwinbin: |
| $(MAKE) -C packages/Win32/cygwin cygwinbin |
| |
| # We extend the standard install with a custom hook: |
| install-data-hook: |
| cd include && $(MAKE) install |
| cd docs && $(MAKE) install |
| |
| # We extend the standard uninstall with a custom hook: |
| uninstall-hook: |
| cd include && $(MAKE) uninstall |
| cd docs && $(MAKE) uninstall |
| |
| ca-bundle: lib/mk-ca-bundle.pl |
| @echo "generate a fresh ca-bundle.crt" |
| @perl $< -b -l -u lib/ca-bundle.crt |
| |
| ca-firefox: lib/firefox-db2pem.sh |
| @echo "generate a fresh ca-bundle.crt" |
| ./lib/firefox-db2pem.sh lib/ca-bundle.crt |
| |
| checksrc: |
| cd lib && $(MAKE) checksrc |
| cd src && $(MAKE) checksrc |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |