| /* | |
| * Copyright (c) 1993, 1994, 1995, 1996, 1997 | |
| * The Regents of the University of California. All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that: (1) source code distributions | |
| * retain the above copyright notice and this paragraph in its entirety, (2) | |
| * distributions including binary code include the above copyright notice and | |
| * this paragraph in its entirety in the documentation or other materials | |
| * provided with the distribution, and (3) all advertising materials mentioning | |
| * features or use of this software display the following acknowledgement: | |
| * ``This product includes software developed by the University of California, | |
| * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of | |
| * the University nor the names of its contributors may be used to endorse | |
| * or promote products derived from this software without specific prior | |
| * written permission. | |
| * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. | |
| * | |
| * This code contributed by Atanu Ghosh (atanu@cs.ucl.ac.uk), | |
| * University College London, and subsequently modified by | |
| * Guy Harris (guy@alum.mit.edu), Mark Pizzolato | |
| * <List-tcpdump-workers@subscriptions.pizzolato.net>, | |
| * Mark C. Brown (mbrown@hp.com), and Sagun Shakya <Sagun.Shakya@Sun.COM>. | |
| */ | |
| /* | |
| * Packet capture routine for DLPI under SunOS 5, HP-UX 9/10/11, and AIX. | |
| * | |
| * Notes: | |
| * | |
| * - The DLIOCRAW ioctl() is specific to SunOS. | |
| * | |
| * - There is a bug in bufmod(7) such that setting the snapshot | |
| * length results in data being left of the front of the packet. | |
| * | |
| * - It might be desirable to use pfmod(7) to filter packets in the | |
| * kernel when possible. | |
| * | |
| * - An older version of the HP-UX DLPI Programmer's Guide, which | |
| * I think was advertised as the 10.20 version, used to be available | |
| * at | |
| * | |
| * http://docs.hp.com/hpux/onlinedocs/B2355-90093/B2355-90093.html | |
| * | |
| * but is no longer available; it can still be found at | |
| * | |
| * http://h21007.www2.hp.com/dspp/files/unprotected/Drivers/Docs/Refs/B2355-90093.pdf | |
| * | |
| * in PDF form. | |
| * | |
| * - The HP-UX 10.x, 11.0, and 11i v1.6 version of the HP-UX DLPI | |
| * Programmer's Guide, which I think was once advertised as the | |
| * 11.00 version is available at | |
| * | |
| * http://docs.hp.com/en/B2355-90139/index.html | |
| * | |
| * - The HP-UX 11i v2 version of the HP-UX DLPI Programmer's Guide | |
| * is available at | |
| * | |
| * http://docs.hp.com/en/B2355-90871/index.html | |
| * | |
| * - All of the HP documents describe raw-mode services, which are | |
| * what we use if DL_HP_RAWDLS is defined. XXX - we use __hpux | |
| * in some places to test for HP-UX, but use DL_HP_RAWDLS in | |
| * other places; do we support any versions of HP-UX without | |
| * DL_HP_RAWDLS? | |
| */ | |
| #ifndef lint | |
| static const char rcsid[] _U_ = | |
| "@(#) $Header: /tcpdump/master/libpcap/pcap-dlpi.c,v 1.128 2008-12-02 16:20:23 guy Exp $ (LBL)"; | |
| #endif | |
| #ifdef HAVE_CONFIG_H | |
| #include "config.h" | |
| #endif | |
| #include <sys/types.h> | |
| #include <sys/time.h> | |
| #ifdef HAVE_SYS_BUFMOD_H | |
| #include <sys/bufmod.h> | |
| #endif | |
| #include <sys/dlpi.h> | |
| #ifdef HAVE_SYS_DLPI_EXT_H | |
| #include <sys/dlpi_ext.h> | |
| #endif | |
| #ifdef HAVE_HPUX9 | |
| #include <sys/socket.h> | |
| #endif | |
| #ifdef DL_HP_PPA_REQ | |
| #include <sys/stat.h> | |
| #endif | |
| #include <sys/stream.h> | |
| #if defined(HAVE_SOLARIS) && defined(HAVE_SYS_BUFMOD_H) | |
| #include <sys/systeminfo.h> | |
| #endif | |
| #ifdef HAVE_HPUX9 | |
| #include <net/if.h> | |
| #endif | |
| #include <ctype.h> | |
| #ifdef HAVE_HPUX9 | |
| #include <nlist.h> | |
| #endif | |
| #include <errno.h> | |
| #include <fcntl.h> | |
| #include <memory.h> | |
| #include <stdio.h> | |
| #include <stdlib.h> | |
| #include <string.h> | |
| #include <stropts.h> | |
| #include <unistd.h> | |
| #ifdef HAVE_LIMITS_H | |
| #include <limits.h> | |
| #else | |
| #define INT_MAX 2147483647 | |
| #endif | |
| #include "pcap-int.h" | |
| #include "dlpisubs.h" | |
| #ifdef HAVE_OS_PROTO_H | |
| #include "os-proto.h" | |
| #endif | |
| #ifndef PCAP_DEV_PREFIX | |
| #ifdef _AIX | |
| #define PCAP_DEV_PREFIX "/dev/dlpi" | |
| #else | |
| #define PCAP_DEV_PREFIX "/dev" | |
| #endif | |
| #endif | |
| #define MAXDLBUF 8192 | |
| /* Forwards */ | |
| static char *split_dname(char *, int *, char *); | |
| static int dl_doattach(int, int, char *); | |
| #ifdef DL_HP_RAWDLS | |
| static int dl_dohpuxbind(int, char *); | |
| #endif | |
| static int dlpromiscon(pcap_t *, bpf_u_int32); | |
| static int dlbindreq(int, bpf_u_int32, char *); | |
| static int dlbindack(int, char *, char *, int *); | |
| static int dlokack(int, const char *, char *, char *); | |
| static int dlinforeq(int, char *); | |
| static int dlinfoack(int, char *, char *); | |
| #ifdef HAVE_DLPI_PASSIVE | |
| static void dlpassive(int, char *); | |
| #endif | |
| #ifdef DL_HP_RAWDLS | |
| static int dlrawdatareq(int, const u_char *, int); | |
| #endif | |
| static int recv_ack(int, int, const char *, char *, char *, int *); | |
| static char *dlstrerror(bpf_u_int32); | |
| static char *dlprim(bpf_u_int32); | |
| #if defined(HAVE_SOLARIS) && defined(HAVE_SYS_BUFMOD_H) | |
| static char *get_release(bpf_u_int32 *, bpf_u_int32 *, bpf_u_int32 *); | |
| #endif | |
| static int send_request(int, char *, int, char *, char *); | |
| #ifdef HAVE_HPUX9 | |
| static int dlpi_kread(int, off_t, void *, u_int, char *); | |
| #endif | |
| #ifdef HAVE_DEV_DLPI | |
| static int get_dlpi_ppa(int, const char *, int, char *); | |
| #endif | |
| /* XXX Needed by HP-UX (at least) */ | |
| static bpf_u_int32 ctlbuf[MAXDLBUF]; | |
| static struct strbuf ctl = { | |
| MAXDLBUF, | |
| 0, | |
| (char *)ctlbuf | |
| }; | |
| /* | |
| * Cast a buffer to "union DL_primitives" without provoking warnings | |
| * from the compiler. | |
| */ | |
| #define MAKE_DL_PRIMITIVES(ptr) ((union DL_primitives *)(void *)(ptr)) | |
| static int | |
| pcap_read_dlpi(pcap_t *p, int cnt, pcap_handler callback, u_char *user) | |
| { | |
| int cc; | |
| u_char *bp; | |
| int flags; | |
| struct strbuf data; | |
| flags = 0; | |
| cc = p->cc; | |
| if (cc == 0) { | |
| data.buf = (char *)p->buffer + p->offset; | |
| data.maxlen = p->bufsize; | |
| data.len = 0; | |
| do { | |
| /* | |
| * Has "pcap_breakloop()" been called? | |
| */ | |
| if (p->break_loop) { | |
| /* | |
| * Yes - clear the flag that indicates | |
| * that it has, and return -2 to | |
| * indicate that we were told to | |
| * break out of the loop. | |
| */ | |
| p->break_loop = 0; | |
| return (-2); | |
| } | |
| /* | |
| * XXX - check for the DLPI primitive, which | |
| * would be DL_HP_RAWDATA_IND on HP-UX | |
| * if we're in raw mode? | |
| */ | |
| if (getmsg(p->fd, &ctl, &data, &flags) < 0) { | |
| /* Don't choke when we get ptraced */ | |
| switch (errno) { | |
| case EINTR: | |
| cc = 0; | |
| continue; | |
| case EAGAIN: | |
| return (0); | |
| } | |
| strlcpy(p->errbuf, pcap_strerror(errno), | |
| sizeof(p->errbuf)); | |
| return (-1); | |
| } | |
| cc = data.len; | |
| } while (cc == 0); | |
| bp = p->buffer + p->offset; | |
| } else | |
| bp = p->bp; | |
| return (pcap_process_pkts(p, callback, user, cnt, bp, cc)); | |
| } | |
| static int | |
| pcap_inject_dlpi(pcap_t *p, const void *buf, size_t size) | |
| { | |
| int ret; | |
| #if defined(DLIOCRAW) | |
| ret = write(p->fd, buf, size); | |
| if (ret == -1) { | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "send: %s", | |
| pcap_strerror(errno)); | |
| return (-1); | |
| } | |
| #elif defined(DL_HP_RAWDLS) | |
| if (p->send_fd < 0) { | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, | |
| "send: Output FD couldn't be opened"); | |
| return (-1); | |
| } | |
| ret = dlrawdatareq(p->send_fd, buf, size); | |
| if (ret == -1) { | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "send: %s", | |
| pcap_strerror(errno)); | |
| return (-1); | |
| } | |
| /* | |
| * putmsg() returns either 0 or -1; it doesn't indicate how | |
| * many bytes were written (presumably they were all written | |
| * or none of them were written). OpenBSD's pcap_inject() | |
| * returns the number of bytes written, so, for API compatibility, | |
| * we return the number of bytes we were told to write. | |
| */ | |
| ret = size; | |
| #else /* no raw mode */ | |
| /* | |
| * XXX - this is a pain, because you might have to extract | |
| * the address from the packet and use it in a DL_UNITDATA_REQ | |
| * request. That would be dependent on the link-layer type. | |
| * | |
| * I also don't know what SAP you'd have to bind the descriptor | |
| * to, or whether you'd need separate "receive" and "send" FDs, | |
| * nor do I know whether you'd need different bindings for | |
| * D/I/X Ethernet and 802.3, or for {FDDI,Token Ring} plus | |
| * 802.2 and {FDDI,Token Ring} plus 802.2 plus SNAP. | |
| * | |
| * So, for now, we just return a "you can't send" indication, | |
| * and leave it up to somebody with a DLPI-based system lacking | |
| * both DLIOCRAW and DL_HP_RAWDLS to supply code to implement | |
| * packet transmission on that system. If they do, they should | |
| * send it to us - but should not send us code that assumes | |
| * Ethernet; if the code doesn't work on non-Ethernet interfaces, | |
| * it should check "p->linktype" and reject the send request if | |
| * it's anything other than DLT_EN10MB. | |
| */ | |
| strlcpy(p->errbuf, "send: Not supported on this version of this OS", | |
| PCAP_ERRBUF_SIZE); | |
| ret = -1; | |
| #endif /* raw mode */ | |
| return (ret); | |
| } | |
| #ifndef DL_IPATM | |
| #define DL_IPATM 0x12 /* ATM Classical IP interface */ | |
| #endif | |
| #ifdef HAVE_SOLARIS | |
| /* | |
| * For SunATM. | |
| */ | |
| #ifndef A_GET_UNITS | |
| #define A_GET_UNITS (('A'<<8)|118) | |
| #endif /* A_GET_UNITS */ | |
| #ifndef A_PROMISCON_REQ | |
| #define A_PROMISCON_REQ (('A'<<8)|121) | |
| #endif /* A_PROMISCON_REQ */ | |
| #endif /* HAVE_SOLARIS */ | |
| static void | |
| pcap_cleanup_dlpi(pcap_t *p) | |
| { | |
| if (p->send_fd >= 0) { | |
| close(p->send_fd); | |
| p->send_fd = -1; | |
| } | |
| pcap_cleanup_live_common(p); | |
| } | |
| static int | |
| pcap_activate_dlpi(pcap_t *p) | |
| { | |
| register char *cp; | |
| int ppa; | |
| #ifdef HAVE_SOLARIS | |
| int isatm = 0; | |
| #endif | |
| register dl_info_ack_t *infop; | |
| #ifdef HAVE_SYS_BUFMOD_H | |
| bpf_u_int32 ss; | |
| #ifdef HAVE_SOLARIS | |
| register char *release; | |
| bpf_u_int32 osmajor, osminor, osmicro; | |
| #endif | |
| #endif | |
| bpf_u_int32 buf[MAXDLBUF]; | |
| char dname[100]; | |
| #ifndef HAVE_DEV_DLPI | |
| char dname2[100]; | |
| #endif | |
| int status = PCAP_ERROR; | |
| #ifdef HAVE_DEV_DLPI | |
| /* | |
| ** Remove any "/dev/" on the front of the device. | |
| */ | |
| cp = strrchr(p->opt.source, '/'); | |
| if (cp == NULL) | |
| strlcpy(dname, p->opt.source, sizeof(dname)); | |
| else | |
| strlcpy(dname, cp + 1, sizeof(dname)); | |
| /* | |
| * Split the device name into a device type name and a unit number; | |
| * chop off the unit number, so "dname" is just a device type name. | |
| */ | |
| cp = split_dname(dname, &ppa, p->errbuf); | |
| if (cp == NULL) { | |
| status = PCAP_ERROR_NO_SUCH_DEVICE; | |
| goto bad; | |
| } | |
| *cp = '\0'; | |
| /* | |
| * Use "/dev/dlpi" as the device. | |
| * | |
| * XXX - HP's DLPI Programmer's Guide for HP-UX 11.00 says that | |
| * the "dl_mjr_num" field is for the "major number of interface | |
| * driver"; that's the major of "/dev/dlpi" on the system on | |
| * which I tried this, but there may be DLPI devices that | |
| * use a different driver, in which case we may need to | |
| * search "/dev" for the appropriate device with that major | |
| * device number, rather than hardwiring "/dev/dlpi". | |
| */ | |
| cp = "/dev/dlpi"; | |
| if ((p->fd = open(cp, O_RDWR)) < 0) { | |
| if (errno == EPERM || errno == EACCES) | |
| status = PCAP_ERROR_PERM_DENIED; | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, | |
| "%s: %s", cp, pcap_strerror(errno)); | |
| goto bad; | |
| } | |
| #ifdef DL_HP_RAWDLS | |
| /* | |
| * XXX - HP-UX 10.20 and 11.xx don't appear to support sending and | |
| * receiving packets on the same descriptor - you need separate | |
| * descriptors for sending and receiving, bound to different SAPs. | |
| * | |
| * If the open fails, we just leave -1 in "p->send_fd" and reject | |
| * attempts to send packets, just as if, in pcap-bpf.c, we fail | |
| * to open the BPF device for reading and writing, we just try | |
| * to open it for reading only and, if that succeeds, just let | |
| * the send attempts fail. | |
| */ | |
| p->send_fd = open(cp, O_RDWR); | |
| #endif | |
| /* | |
| * Get a table of all PPAs for that device, and search that | |
| * table for the specified device type name and unit number. | |
| */ | |
| ppa = get_dlpi_ppa(p->fd, dname, ppa, p->errbuf); | |
| if (ppa < 0) { | |
| status = ppa; | |
| goto bad; | |
| } | |
| #else | |
| /* | |
| * If the device name begins with "/", assume it begins with | |
| * the pathname of the directory containing the device to open; | |
| * otherwise, concatenate the device directory name and the | |
| * device name. | |
| */ | |
| if (*p->opt.source == '/') | |
| strlcpy(dname, p->opt.source, sizeof(dname)); | |
| else | |
| snprintf(dname, sizeof(dname), "%s/%s", PCAP_DEV_PREFIX, | |
| p->opt.source); | |
| /* | |
| * Get the unit number, and a pointer to the end of the device | |
| * type name. | |
| */ | |
| cp = split_dname(dname, &ppa, p->errbuf); | |
| if (cp == NULL) { | |
| status = PCAP_ERROR_NO_SUCH_DEVICE; | |
| goto bad; | |
| } | |
| /* | |
| * Make a copy of the device pathname, and then remove the unit | |
| * number from the device pathname. | |
| */ | |
| strlcpy(dname2, dname, sizeof(dname)); | |
| *cp = '\0'; | |
| /* Try device without unit number */ | |
| if ((p->fd = open(dname, O_RDWR)) < 0) { | |
| if (errno != ENOENT) { | |
| if (errno == EPERM || errno == EACCES) | |
| status = PCAP_ERROR_PERM_DENIED; | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: %s", dname, | |
| pcap_strerror(errno)); | |
| goto bad; | |
| } | |
| /* Try again with unit number */ | |
| if ((p->fd = open(dname2, O_RDWR)) < 0) { | |
| if (errno == ENOENT) { | |
| status = PCAP_ERROR_NO_SUCH_DEVICE; | |
| /* | |
| * We provide an error message even | |
| * for this error, for diagnostic | |
| * purposes (so that, for example, | |
| * the app can show the message if the | |
| * user requests it). | |
| * | |
| * In it, we just report "No DLPI device | |
| * found" with the device name, so people | |
| * don't get confused and think, for example, | |
| * that if they can't capture on "lo0" | |
| * on Solaris the fix is to change libpcap | |
| * (or the application that uses it) to | |
| * look for something other than "/dev/lo0", | |
| * as the fix is to look for an operating | |
| * system other than Solaris - you just | |
| * *can't* capture on a loopback interface | |
| * on Solaris, the lack of a DLPI device | |
| * for the loopback interface is just a | |
| * symptom of that inability. | |
| */ | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, | |
| "%s: No DLPI device found", p->opt.source); | |
| } else { | |
| if (errno == EPERM || errno == EACCES) | |
| status = PCAP_ERROR_PERM_DENIED; | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s: %s", | |
| dname2, pcap_strerror(errno)); | |
| } | |
| goto bad; | |
| } | |
| /* XXX Assume unit zero */ | |
| ppa = 0; | |
| } | |
| #endif | |
| /* | |
| ** Attach if "style 2" provider | |
| */ | |
| if (dlinforeq(p->fd, p->errbuf) < 0 || | |
| dlinfoack(p->fd, (char *)buf, p->errbuf) < 0) | |
| goto bad; | |
| infop = &(MAKE_DL_PRIMITIVES(buf))->info_ack; | |
| #ifdef HAVE_SOLARIS | |
| if (infop->dl_mac_type == DL_IPATM) | |
| isatm = 1; | |
| #endif | |
| if (infop->dl_provider_style == DL_STYLE2) { | |
| status = dl_doattach(p->fd, ppa, p->errbuf); | |
| if (status < 0) | |
| goto bad; | |
| #ifdef DL_HP_RAWDLS | |
| if (p->send_fd >= 0) { | |
| if (dl_doattach(p->send_fd, ppa, p->errbuf) < 0) | |
| goto bad; | |
| } | |
| #endif | |
| } | |
| if (p->opt.rfmon) { | |
| /* | |
| * This device exists, but we don't support monitor mode | |
| * any platforms that support DLPI. | |
| */ | |
| status = PCAP_ERROR_RFMON_NOTSUP; | |
| goto bad; | |
| } | |
| #ifdef HAVE_DLPI_PASSIVE | |
| /* | |
| * Enable Passive mode to be able to capture on aggregated link. | |
| * Not supported in all Solaris versions. | |
| */ | |
| dlpassive(p->fd, p->errbuf); | |
| #endif | |
| /* | |
| ** Bind (defer if using HP-UX 9 or HP-UX 10.20 or later, totally | |
| ** skip if using SINIX) | |
| */ | |
| #if !defined(HAVE_HPUX9) && !defined(HAVE_HPUX10_20_OR_LATER) && !defined(sinix) | |
| #ifdef _AIX | |
| /* | |
| ** AIX. | |
| ** According to IBM's AIX Support Line, the dl_sap value | |
| ** should not be less than 0x600 (1536) for standard Ethernet. | |
| ** However, we seem to get DL_BADADDR - "DLSAP addr in improper | |
| ** format or invalid" - errors if we use 1537 on the "tr0" | |
| ** device, which, given that its name starts with "tr" and that | |
| ** it's IBM, probably means a Token Ring device. (Perhaps we | |
| ** need to use 1537 on "/dev/dlpi/en" because that device is for | |
| ** D/I/X Ethernet, the "SAP" is actually an Ethernet type, and | |
| ** it rejects invalid Ethernet types.) | |
| ** | |
| ** So if 1537 fails, we try 2, as Hyung Sik Yoon of IBM Korea | |
| ** says that works on Token Ring (he says that 0 does *not* | |
| ** work; perhaps that's considered an invalid LLC SAP value - I | |
| ** assume the SAP value in a DLPI bind is an LLC SAP for network | |
| ** types that use 802.2 LLC). | |
| */ | |
| if ((dlbindreq(p->fd, 1537, p->errbuf) < 0 && | |
| dlbindreq(p->fd, 2, p->errbuf) < 0) || | |
| dlbindack(p->fd, (char *)buf, p->errbuf, NULL) < 0) | |
| goto bad; | |
| #elif defined(DL_HP_RAWDLS) | |
| /* | |
| ** HP-UX 10.0x and 10.1x. | |
| */ | |
| if (dl_dohpuxbind(p->fd, p->errbuf) < 0) | |
| goto bad; | |
| if (p->send_fd >= 0) { | |
| /* | |
| ** XXX - if this fails, just close send_fd and | |
| ** set it to -1, so that you can't send but can | |
| ** still receive? | |
| */ | |
| if (dl_dohpuxbind(p->send_fd, p->errbuf) < 0) | |
| goto bad; | |
| } | |
| #else /* neither AIX nor HP-UX */ | |
| /* | |
| ** Not Sinix, and neither AIX nor HP-UX - Solaris, and any other | |
| ** OS using DLPI. | |
| **/ | |
| if (dlbindreq(p->fd, 0, p->errbuf) < 0 || | |
| dlbindack(p->fd, (char *)buf, p->errbuf, NULL) < 0) | |
| goto bad; | |
| #endif /* AIX vs. HP-UX vs. other */ | |
| #endif /* !HP-UX 9 and !HP-UX 10.20 or later and !SINIX */ | |
| #ifdef HAVE_SOLARIS | |
| if (isatm) { | |
| /* | |
| ** Have to turn on some special ATM promiscuous mode | |
| ** for SunATM. | |
| ** Do *NOT* turn regular promiscuous mode on; it doesn't | |
| ** help, and may break things. | |
| */ | |
| if (strioctl(p->fd, A_PROMISCON_REQ, 0, NULL) < 0) { | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, | |
| "A_PROMISCON_REQ: %s", pcap_strerror(errno)); | |
| goto bad; | |
| } | |
| } else | |
| #endif | |
| if (p->opt.promisc) { | |
| /* | |
| ** Enable promiscuous (not necessary on send FD) | |
| */ | |
| status = dlpromiscon(p, DL_PROMISC_PHYS); | |
| if (status < 0) { | |
| if (status == PCAP_ERROR_PERM_DENIED) | |
| status = PCAP_ERROR_PROMISC_PERM_DENIED; | |
| goto bad; | |
| } | |
| /* | |
| ** Try to enable multicast (you would have thought | |
| ** promiscuous would be sufficient). (Skip if using | |
| ** HP-UX or SINIX) (Not necessary on send FD) | |
| */ | |
| #if !defined(__hpux) && !defined(sinix) | |
| status = dlpromiscon(p, DL_PROMISC_MULTI); | |
| if (status < 0) | |
| status = PCAP_WARNING; | |
| #endif | |
| } | |
| /* | |
| ** Try to enable SAP promiscuity (when not in promiscuous mode | |
| ** when using HP-UX, when not doing SunATM on Solaris, and never | |
| ** under SINIX) (Not necessary on send FD) | |
| */ | |
| #ifndef sinix | |
| #if defined(__hpux) | |
| /* HP-UX - only do this when not in promiscuous mode */ | |
| if (!p->opt.promisc) { | |
| #elif defined(HAVE_SOLARIS) | |
| /* Solaris - don't do this on SunATM devices */ | |
| if (!isatm) { | |
| #else | |
| /* Everything else (except for SINIX) - always do this */ | |
| { | |
| #endif | |
| status = dlpromiscon(p, DL_PROMISC_SAP); | |
| if (status < 0) { | |
| /* | |
| * Not fatal, since the DL_PROMISC_PHYS mode worked. | |
| * Report it as a warning, however. | |
| */ | |
| if (p->opt.promisc) | |
| status = PCAP_WARNING; | |
| else | |
| goto bad; | |
| } | |
| } | |
| #endif /* sinix */ | |
| /* | |
| ** HP-UX 9, and HP-UX 10.20 or later, must bind after setting | |
| ** promiscuous options. | |
| */ | |
| #if defined(HAVE_HPUX9) || defined(HAVE_HPUX10_20_OR_LATER) | |
| if (dl_dohpuxbind(p->fd, p->errbuf) < 0) | |
| goto bad; | |
| /* | |
| ** We don't set promiscuous mode on the send FD, but we'll defer | |
| ** binding it anyway, just to keep the HP-UX 9/10.20 or later | |
| ** code together. | |
| */ | |
| if (p->send_fd >= 0) { | |
| /* | |
| ** XXX - if this fails, just close send_fd and | |
| ** set it to -1, so that you can't send but can | |
| ** still receive? | |
| */ | |
| if (dl_dohpuxbind(p->send_fd, p->errbuf) < 0) | |
| goto bad; | |
| } | |
| #endif | |
| /* | |
| ** Determine link type | |
| ** XXX - get SAP length and address length as well, for use | |
| ** when sending packets. | |
| */ | |
| if (dlinforeq(p->fd, p->errbuf) < 0 || | |
| dlinfoack(p->fd, (char *)buf, p->errbuf) < 0) | |
| goto bad; | |
| infop = &(MAKE_DL_PRIMITIVES(buf))->info_ack; | |
| if (pcap_process_mactype(p, infop->dl_mac_type) != 0) | |
| goto bad; | |
| #ifdef DLIOCRAW | |
| /* | |
| ** This is a non standard SunOS hack to get the full raw link-layer | |
| ** header. | |
| */ | |
| if (strioctl(p->fd, DLIOCRAW, 0, NULL) < 0) { | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "DLIOCRAW: %s", | |
| pcap_strerror(errno)); | |
| goto bad; | |
| } | |
| #endif | |
| #ifdef HAVE_SYS_BUFMOD_H | |
| ss = p->snapshot; | |
| /* | |
| ** There is a bug in bufmod(7). When dealing with messages of | |
| ** less than snaplen size it strips data from the beginning not | |
| ** the end. | |
| ** | |
| ** This bug is fixed in 5.3.2. Also, there is a patch available. | |
| ** Ask for bugid 1149065. | |
| */ | |
| #ifdef HAVE_SOLARIS | |
| release = get_release(&osmajor, &osminor, &osmicro); | |
| if (osmajor == 5 && (osminor <= 2 || (osminor == 3 && osmicro < 2)) && | |
| getenv("BUFMOD_FIXED") == NULL) { | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, | |
| "WARNING: bufmod is broken in SunOS %s; ignoring snaplen.", | |
| release); | |
| ss = 0; | |
| status = PCAP_WARNING; | |
| } | |
| #endif | |
| /* Push and configure bufmod. */ | |
| if (pcap_conf_bufmod(p, ss, p->md.timeout) != 0) | |
| goto bad; | |
| #endif | |
| /* | |
| ** As the last operation flush the read side. | |
| */ | |
| if (ioctl(p->fd, I_FLUSH, FLUSHR) != 0) { | |
| snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "FLUSHR: %s", | |
| pcap_strerror(errno)); | |
| goto bad; | |
| } | |
| /* Allocate data buffer. */ | |
| if (pcap_alloc_databuf(p) != 0) | |
| goto bad; | |
| /* Success - but perhaps with a warning */ | |
| if (status < 0) | |
| status = 0; | |
| /* | |
| * "p->fd" is an FD for a STREAMS device, so "select()" and | |
| * "poll()" should work on it. | |
| */ | |
| p->selectable_fd = p->fd; | |
| p->read_op = pcap_read_dlpi; | |
| p->inject_op = pcap_inject_dlpi; | |
| p->setfilter_op = install_bpf_program; /* no kernel filtering */ | |
| p->setdirection_op = NULL; /* Not implemented.*/ | |
| p->set_datalink_op = NULL; /* can't change data link type */ | |
| p->getnonblock_op = pcap_getnonblock_fd; | |
| p->setnonblock_op = pcap_setnonblock_fd; | |
| p->stats_op = pcap_stats_dlpi; | |
| p->cleanup_op = pcap_cleanup_dlpi; | |
| return (status); | |
| bad: | |
| pcap_cleanup_dlpi(p); | |
| return (status); | |
| } | |
| /* | |
| * Split a device name into a device type name and a unit number; | |
| * return the a pointer to the beginning of the unit number, which | |
| * is the end of the device type name, and set "*unitp" to the unit | |
| * number. | |
| * | |
| * Returns NULL on error, and fills "ebuf" with an error message. | |
| */ | |
| static char * | |
| split_dname(char *device, int *unitp, char *ebuf) | |
| { | |
| char *cp; | |
| char *eos; | |
| long unit; | |
| /* | |
| * Look for a number at the end of the device name string. | |
| */ | |
| cp = device + strlen(device) - 1; | |
| if (*cp < '0' || *cp > '9') { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s missing unit number", | |
| device); | |
| return (NULL); | |
| } | |
| /* Digits at end of string are unit number */ | |
| while (cp-1 >= device && *(cp-1) >= '0' && *(cp-1) <= '9') | |
| cp--; | |
| errno = 0; | |
| unit = strtol(cp, &eos, 10); | |
| if (*eos != '\0') { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s bad unit number", device); | |
| return (NULL); | |
| } | |
| if (errno == ERANGE || unit > INT_MAX) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s unit number too large", | |
| device); | |
| return (NULL); | |
| } | |
| if (unit < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "%s unit number is negative", | |
| device); | |
| return (NULL); | |
| } | |
| *unitp = (int)unit; | |
| return (cp); | |
| } | |
| static int | |
| dl_doattach(int fd, int ppa, char *ebuf) | |
| { | |
| dl_attach_req_t req; | |
| bpf_u_int32 buf[MAXDLBUF]; | |
| int err; | |
| req.dl_primitive = DL_ATTACH_REQ; | |
| req.dl_ppa = ppa; | |
| if (send_request(fd, (char *)&req, sizeof(req), "attach", ebuf) < 0) | |
| return (PCAP_ERROR); | |
| err = dlokack(fd, "attach", (char *)buf, ebuf); | |
| if (err < 0) | |
| return (err); | |
| return (0); | |
| } | |
| #ifdef DL_HP_RAWDLS | |
| static int | |
| dl_dohpuxbind(int fd, char *ebuf) | |
| { | |
| int hpsap; | |
| int uerror; | |
| bpf_u_int32 buf[MAXDLBUF]; | |
| /* | |
| * XXX - we start at 22 because we used to use only 22, but | |
| * that was just because that was the value used in some | |
| * sample code from HP. With what value *should* we start? | |
| * Does it matter, given that we're enabling SAP promiscuity | |
| * on the input FD? | |
| */ | |
| hpsap = 22; | |
| for (;;) { | |
| if (dlbindreq(fd, hpsap, ebuf) < 0) | |
| return (-1); | |
| if (dlbindack(fd, (char *)buf, ebuf, &uerror) >= 0) | |
| break; | |
| /* | |
| * For any error other than a UNIX EBUSY, give up. | |
| */ | |
| if (uerror != EBUSY) { | |
| /* | |
| * dlbindack() has already filled in ebuf for | |
| * this error. | |
| */ | |
| return (-1); | |
| } | |
| /* | |
| * For EBUSY, try the next SAP value; that means that | |
| * somebody else is using that SAP. Clear ebuf so | |
| * that application doesn't report the "Device busy" | |
| * error as a warning. | |
| */ | |
| *ebuf = '\0'; | |
| hpsap++; | |
| if (hpsap > 100) { | |
| strlcpy(ebuf, | |
| "All SAPs from 22 through 100 are in use", | |
| PCAP_ERRBUF_SIZE); | |
| return (-1); | |
| } | |
| } | |
| return (0); | |
| } | |
| #endif | |
| #define STRINGIFY(n) #n | |
| static int | |
| dlpromiscon(pcap_t *p, bpf_u_int32 level) | |
| { | |
| dl_promiscon_req_t req; | |
| bpf_u_int32 buf[MAXDLBUF]; | |
| int err; | |
| req.dl_primitive = DL_PROMISCON_REQ; | |
| req.dl_level = level; | |
| if (send_request(p->fd, (char *)&req, sizeof(req), "promiscon", | |
| p->errbuf) < 0) | |
| return (PCAP_ERROR); | |
| err = dlokack(p->fd, "promiscon" STRINGIFY(level), (char *)buf, | |
| p->errbuf); | |
| if (err < 0) | |
| return (err); | |
| return (0); | |
| } | |
| int | |
| pcap_platform_finddevs(pcap_if_t **alldevsp, char *errbuf) | |
| { | |
| #ifdef HAVE_SOLARIS | |
| int fd; | |
| union { | |
| u_int nunits; | |
| char pad[516]; /* XXX - must be at least 513; is 516 | |
| in "atmgetunits" */ | |
| } buf; | |
| char baname[2+1+1]; | |
| u_int i; | |
| /* | |
| * We may have to do special magic to get ATM devices. | |
| */ | |
| if ((fd = open("/dev/ba", O_RDWR)) < 0) { | |
| /* | |
| * We couldn't open the "ba" device. | |
| * For now, just give up; perhaps we should | |
| * return an error if the problem is neither | |
| * a "that device doesn't exist" error (ENOENT, | |
| * ENXIO, etc.) or a "you're not allowed to do | |
| * that" error (EPERM, EACCES). | |
| */ | |
| return (0); | |
| } | |
| if (strioctl(fd, A_GET_UNITS, sizeof(buf), (char *)&buf) < 0) { | |
| snprintf(errbuf, PCAP_ERRBUF_SIZE, "A_GET_UNITS: %s", | |
| pcap_strerror(errno)); | |
| return (-1); | |
| } | |
| for (i = 0; i < buf.nunits; i++) { | |
| snprintf(baname, sizeof baname, "ba%u", i); | |
| if (pcap_add_if(alldevsp, baname, 0, NULL, errbuf) < 0) | |
| return (-1); | |
| } | |
| #endif | |
| return (0); | |
| } | |
| static int | |
| send_request(int fd, char *ptr, int len, char *what, char *ebuf) | |
| { | |
| struct strbuf ctl; | |
| int flags; | |
| ctl.maxlen = 0; | |
| ctl.len = len; | |
| ctl.buf = ptr; | |
| flags = 0; | |
| if (putmsg(fd, &ctl, (struct strbuf *) NULL, flags) < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "send_request: putmsg \"%s\": %s", | |
| what, pcap_strerror(errno)); | |
| return (-1); | |
| } | |
| return (0); | |
| } | |
| static int | |
| recv_ack(int fd, int size, const char *what, char *bufp, char *ebuf, int *uerror) | |
| { | |
| union DL_primitives *dlp; | |
| struct strbuf ctl; | |
| int flags; | |
| /* | |
| * Clear out "*uerror", so it's only set for DL_ERROR_ACK/DL_SYSERR, | |
| * making that the only place where EBUSY is treated specially. | |
| */ | |
| if (uerror != NULL) | |
| *uerror = 0; | |
| ctl.maxlen = MAXDLBUF; | |
| ctl.len = 0; | |
| ctl.buf = bufp; | |
| flags = 0; | |
| if (getmsg(fd, &ctl, (struct strbuf*)NULL, &flags) < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "recv_ack: %s getmsg: %s", | |
| what, pcap_strerror(errno)); | |
| return (PCAP_ERROR); | |
| } | |
| dlp = MAKE_DL_PRIMITIVES(ctl.buf); | |
| switch (dlp->dl_primitive) { | |
| case DL_INFO_ACK: | |
| case DL_BIND_ACK: | |
| case DL_OK_ACK: | |
| #ifdef DL_HP_PPA_ACK | |
| case DL_HP_PPA_ACK: | |
| #endif | |
| /* These are OK */ | |
| break; | |
| case DL_ERROR_ACK: | |
| switch (dlp->error_ack.dl_errno) { | |
| case DL_SYSERR: | |
| if (uerror != NULL) | |
| *uerror = dlp->error_ack.dl_unix_errno; | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "recv_ack: %s: UNIX error - %s", | |
| what, pcap_strerror(dlp->error_ack.dl_unix_errno)); | |
| if (dlp->error_ack.dl_unix_errno == EPERM || | |
| dlp->error_ack.dl_unix_errno == EACCES) | |
| return (PCAP_ERROR_PERM_DENIED); | |
| break; | |
| default: | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "recv_ack: %s: %s", | |
| what, dlstrerror(dlp->error_ack.dl_errno)); | |
| if (dlp->error_ack.dl_errno == DL_BADPPA) | |
| return (PCAP_ERROR_NO_SUCH_DEVICE); | |
| else if (dlp->error_ack.dl_errno == DL_ACCESS) | |
| return (PCAP_ERROR_PERM_DENIED); | |
| break; | |
| } | |
| return (PCAP_ERROR); | |
| default: | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "recv_ack: %s: Unexpected primitive ack %s", | |
| what, dlprim(dlp->dl_primitive)); | |
| return (PCAP_ERROR); | |
| } | |
| if (ctl.len < size) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "recv_ack: %s: Ack too small (%d < %d)", | |
| what, ctl.len, size); | |
| return (PCAP_ERROR); | |
| } | |
| return (ctl.len); | |
| } | |
| static char * | |
| dlstrerror(bpf_u_int32 dl_errno) | |
| { | |
| static char errstring[6+2+8+1]; | |
| switch (dl_errno) { | |
| case DL_ACCESS: | |
| return ("Improper permissions for request"); | |
| case DL_BADADDR: | |
| return ("DLSAP addr in improper format or invalid"); | |
| case DL_BADCORR: | |
| return ("Seq number not from outstand DL_CONN_IND"); | |
| case DL_BADDATA: | |
| return ("User data exceeded provider limit"); | |
| case DL_BADPPA: | |
| #ifdef HAVE_DEV_DLPI | |
| /* | |
| * With a single "/dev/dlpi" device used for all | |
| * DLPI providers, PPAs have nothing to do with | |
| * unit numbers. | |
| */ | |
| return ("Specified PPA was invalid"); | |
| #else | |
| /* | |
| * We have separate devices for separate devices; | |
| * the PPA is just the unit number. | |
| */ | |
| return ("Specified PPA (device unit) was invalid"); | |
| #endif | |
| case DL_BADPRIM: | |
| return ("Primitive received not known by provider"); | |
| case DL_BADQOSPARAM: | |
| return ("QOS parameters contained invalid values"); | |
| case DL_BADQOSTYPE: | |
| return ("QOS structure type is unknown/unsupported"); | |
| case DL_BADSAP: | |
| return ("Bad LSAP selector"); | |
| case DL_BADTOKEN: | |
| return ("Token used not an active stream"); | |
| case DL_BOUND: | |
| return ("Attempted second bind with dl_max_conind"); | |
| case DL_INITFAILED: | |
| return ("Physical link initialization failed"); | |
| case DL_NOADDR: | |
| return ("Provider couldn't allocate alternate address"); | |
| case DL_NOTINIT: | |
| return ("Physical link not initialized"); | |
| case DL_OUTSTATE: | |
| return ("Primitive issued in improper state"); | |
| case DL_SYSERR: | |
| return ("UNIX system error occurred"); | |
| case DL_UNSUPPORTED: | |
| return ("Requested service not supplied by provider"); | |
| case DL_UNDELIVERABLE: | |
| return ("Previous data unit could not be delivered"); | |
| case DL_NOTSUPPORTED: | |
| return ("Primitive is known but not supported"); | |
| case DL_TOOMANY: | |
| return ("Limit exceeded"); | |
| case DL_NOTENAB: | |
| return ("Promiscuous mode not enabled"); | |
| case DL_BUSY: | |
| return ("Other streams for PPA in post-attached"); | |
| case DL_NOAUTO: | |
| return ("Automatic handling XID&TEST not supported"); | |
| case DL_NOXIDAUTO: | |
| return ("Automatic handling of XID not supported"); | |
| case DL_NOTESTAUTO: | |
| return ("Automatic handling of TEST not supported"); | |
| case DL_XIDAUTO: | |
| return ("Automatic handling of XID response"); | |
| case DL_TESTAUTO: | |
| return ("Automatic handling of TEST response"); | |
| case DL_PENDING: | |
| return ("Pending outstanding connect indications"); | |
| default: | |
| sprintf(errstring, "Error %02x", dl_errno); | |
| return (errstring); | |
| } | |
| } | |
| static char * | |
| dlprim(bpf_u_int32 prim) | |
| { | |
| static char primbuf[80]; | |
| switch (prim) { | |
| case DL_INFO_REQ: | |
| return ("DL_INFO_REQ"); | |
| case DL_INFO_ACK: | |
| return ("DL_INFO_ACK"); | |
| case DL_ATTACH_REQ: | |
| return ("DL_ATTACH_REQ"); | |
| case DL_DETACH_REQ: | |
| return ("DL_DETACH_REQ"); | |
| case DL_BIND_REQ: | |
| return ("DL_BIND_REQ"); | |
| case DL_BIND_ACK: | |
| return ("DL_BIND_ACK"); | |
| case DL_UNBIND_REQ: | |
| return ("DL_UNBIND_REQ"); | |
| case DL_OK_ACK: | |
| return ("DL_OK_ACK"); | |
| case DL_ERROR_ACK: | |
| return ("DL_ERROR_ACK"); | |
| case DL_SUBS_BIND_REQ: | |
| return ("DL_SUBS_BIND_REQ"); | |
| case DL_SUBS_BIND_ACK: | |
| return ("DL_SUBS_BIND_ACK"); | |
| case DL_UNITDATA_REQ: | |
| return ("DL_UNITDATA_REQ"); | |
| case DL_UNITDATA_IND: | |
| return ("DL_UNITDATA_IND"); | |
| case DL_UDERROR_IND: | |
| return ("DL_UDERROR_IND"); | |
| case DL_UDQOS_REQ: | |
| return ("DL_UDQOS_REQ"); | |
| case DL_CONNECT_REQ: | |
| return ("DL_CONNECT_REQ"); | |
| case DL_CONNECT_IND: | |
| return ("DL_CONNECT_IND"); | |
| case DL_CONNECT_RES: | |
| return ("DL_CONNECT_RES"); | |
| case DL_CONNECT_CON: | |
| return ("DL_CONNECT_CON"); | |
| case DL_TOKEN_REQ: | |
| return ("DL_TOKEN_REQ"); | |
| case DL_TOKEN_ACK: | |
| return ("DL_TOKEN_ACK"); | |
| case DL_DISCONNECT_REQ: | |
| return ("DL_DISCONNECT_REQ"); | |
| case DL_DISCONNECT_IND: | |
| return ("DL_DISCONNECT_IND"); | |
| case DL_RESET_REQ: | |
| return ("DL_RESET_REQ"); | |
| case DL_RESET_IND: | |
| return ("DL_RESET_IND"); | |
| case DL_RESET_RES: | |
| return ("DL_RESET_RES"); | |
| case DL_RESET_CON: | |
| return ("DL_RESET_CON"); | |
| default: | |
| (void) sprintf(primbuf, "unknown primitive 0x%x", prim); | |
| return (primbuf); | |
| } | |
| } | |
| static int | |
| dlbindreq(int fd, bpf_u_int32 sap, char *ebuf) | |
| { | |
| dl_bind_req_t req; | |
| memset((char *)&req, 0, sizeof(req)); | |
| req.dl_primitive = DL_BIND_REQ; | |
| /* XXX - what if neither of these are defined? */ | |
| #if defined(DL_HP_RAWDLS) | |
| req.dl_max_conind = 1; /* XXX magic number */ | |
| req.dl_service_mode = DL_HP_RAWDLS; | |
| #elif defined(DL_CLDLS) | |
| req.dl_service_mode = DL_CLDLS; | |
| #endif | |
| req.dl_sap = sap; | |
| return (send_request(fd, (char *)&req, sizeof(req), "bind", ebuf)); | |
| } | |
| static int | |
| dlbindack(int fd, char *bufp, char *ebuf, int *uerror) | |
| { | |
| return (recv_ack(fd, DL_BIND_ACK_SIZE, "bind", bufp, ebuf, uerror)); | |
| } | |
| static int | |
| dlokack(int fd, const char *what, char *bufp, char *ebuf) | |
| { | |
| return (recv_ack(fd, DL_OK_ACK_SIZE, what, bufp, ebuf, NULL)); | |
| } | |
| static int | |
| dlinforeq(int fd, char *ebuf) | |
| { | |
| dl_info_req_t req; | |
| req.dl_primitive = DL_INFO_REQ; | |
| return (send_request(fd, (char *)&req, sizeof(req), "info", ebuf)); | |
| } | |
| static int | |
| dlinfoack(int fd, char *bufp, char *ebuf) | |
| { | |
| return (recv_ack(fd, DL_INFO_ACK_SIZE, "info", bufp, ebuf, NULL)); | |
| } | |
| #ifdef HAVE_DLPI_PASSIVE | |
| /* | |
| * Enable DLPI passive mode. We do not care if this request fails, as this | |
| * indicates the underlying DLPI device does not support link aggregation. | |
| */ | |
| static void | |
| dlpassive(int fd, char *ebuf) | |
| { | |
| dl_passive_req_t req; | |
| bpf_u_int32 buf[MAXDLBUF]; | |
| req.dl_primitive = DL_PASSIVE_REQ; | |
| if (send_request(fd, (char *)&req, sizeof(req), "dlpassive", ebuf) == 0) | |
| (void) dlokack(fd, "dlpassive", (char *)buf, ebuf); | |
| } | |
| #endif | |
| #ifdef DL_HP_RAWDLS | |
| /* | |
| * There's an ack *if* there's an error. | |
| */ | |
| static int | |
| dlrawdatareq(int fd, const u_char *datap, int datalen) | |
| { | |
| struct strbuf ctl, data; | |
| long buf[MAXDLBUF]; /* XXX - char? */ | |
| union DL_primitives *dlp; | |
| int dlen; | |
| dlp = MAKE_DL_PRIMITIVES(buf); | |
| dlp->dl_primitive = DL_HP_RAWDATA_REQ; | |
| dlen = DL_HP_RAWDATA_REQ_SIZE; | |
| /* | |
| * HP's documentation doesn't appear to show us supplying any | |
| * address pointed to by the control part of the message. | |
| * I think that's what raw mode means - you just send the raw | |
| * packet, you don't specify where to send it to, as that's | |
| * implied by the destination address. | |
| */ | |
| ctl.maxlen = 0; | |
| ctl.len = dlen; | |
| ctl.buf = (void *)buf; | |
| data.maxlen = 0; | |
| data.len = datalen; | |
| data.buf = (void *)datap; | |
| return (putmsg(fd, &ctl, &data, 0)); | |
| } | |
| #endif /* DL_HP_RAWDLS */ | |
| #if defined(HAVE_SOLARIS) && defined(HAVE_SYS_BUFMOD_H) | |
| static char * | |
| get_release(bpf_u_int32 *majorp, bpf_u_int32 *minorp, bpf_u_int32 *microp) | |
| { | |
| char *cp; | |
| static char buf[32]; | |
| *majorp = 0; | |
| *minorp = 0; | |
| *microp = 0; | |
| if (sysinfo(SI_RELEASE, buf, sizeof(buf)) < 0) | |
| return ("?"); | |
| cp = buf; | |
| if (!isdigit((unsigned char)*cp)) | |
| return (buf); | |
| *majorp = strtol(cp, &cp, 10); | |
| if (*cp++ != '.') | |
| return (buf); | |
| *minorp = strtol(cp, &cp, 10); | |
| if (*cp++ != '.') | |
| return (buf); | |
| *microp = strtol(cp, &cp, 10); | |
| return (buf); | |
| } | |
| #endif | |
| #ifdef DL_HP_PPA_REQ | |
| /* | |
| * Under HP-UX 10 and HP-UX 11, we can ask for the ppa | |
| */ | |
| /* | |
| * Determine ppa number that specifies ifname. | |
| * | |
| * If the "dl_hp_ppa_info_t" doesn't have a "dl_module_id_1" member, | |
| * the code that's used here is the old code for HP-UX 10.x. | |
| * | |
| * However, HP-UX 10.20, at least, appears to have such a member | |
| * in its "dl_hp_ppa_info_t" structure, so the new code is used. | |
| * The new code didn't work on an old 10.20 system on which Rick | |
| * Jones of HP tried it, but with later patches installed, it | |
| * worked - it appears that the older system had those members but | |
| * didn't put anything in them, so, if the search by name fails, we | |
| * do the old search. | |
| * | |
| * Rick suggests that making sure your system is "up on the latest | |
| * lancommon/DLPI/driver patches" is probably a good idea; it'd fix | |
| * that problem, as well as allowing libpcap to see packets sent | |
| * from the system on which the libpcap application is being run. | |
| * (On 10.20, in addition to getting the latest patches, you need | |
| * to turn the kernel "lanc_outbound_promisc_flag" flag on with ADB; | |
| * a posting to "comp.sys.hp.hpux" at | |
| * | |
| * http://www.deja.com/[ST_rn=ps]/getdoc.xp?AN=558092266 | |
| * | |
| * says that, to see the machine's outgoing traffic, you'd need to | |
| * apply the right patches to your system, and also set that variable | |
| * with: | |
| echo 'lanc_outbound_promisc_flag/W1' | /usr/bin/adb -w /stand/vmunix /dev/kmem | |
| * which could be put in, for example, "/sbin/init.d/lan". | |
| * | |
| * Setting the variable is not necessary on HP-UX 11.x. | |
| */ | |
| static int | |
| get_dlpi_ppa(register int fd, register const char *device, register int unit, | |
| register char *ebuf) | |
| { | |
| register dl_hp_ppa_ack_t *ap; | |
| register dl_hp_ppa_info_t *ipstart, *ip; | |
| register int i; | |
| char dname[100]; | |
| register u_long majdev; | |
| struct stat statbuf; | |
| dl_hp_ppa_req_t req; | |
| char buf[MAXDLBUF]; | |
| char *ppa_data_buf; | |
| dl_hp_ppa_ack_t *dlp; | |
| struct strbuf ctl; | |
| int flags; | |
| int ppa; | |
| memset((char *)&req, 0, sizeof(req)); | |
| req.dl_primitive = DL_HP_PPA_REQ; | |
| memset((char *)buf, 0, sizeof(buf)); | |
| if (send_request(fd, (char *)&req, sizeof(req), "hpppa", ebuf) < 0) | |
| return (PCAP_ERROR); | |
| ctl.maxlen = DL_HP_PPA_ACK_SIZE; | |
| ctl.len = 0; | |
| ctl.buf = (char *)buf; | |
| flags = 0; | |
| /* | |
| * DLPI may return a big chunk of data for a DL_HP_PPA_REQ. The normal | |
| * recv_ack will fail because it set the maxlen to MAXDLBUF (8192) | |
| * which is NOT big enough for a DL_HP_PPA_REQ. | |
| * | |
| * This causes libpcap applications to fail on a system with HP-APA | |
| * installed. | |
| * | |
| * To figure out how big the returned data is, we first call getmsg | |
| * to get the small head and peek at the head to get the actual data | |
| * length, and then issue another getmsg to get the actual PPA data. | |
| */ | |
| /* get the head first */ | |
| if (getmsg(fd, &ctl, (struct strbuf *)NULL, &flags) < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "get_dlpi_ppa: hpppa getmsg: %s", pcap_strerror(errno)); | |
| return (PCAP_ERROR); | |
| } | |
| dlp = (dl_hp_ppa_ack_t *)ctl.buf; | |
| if (dlp->dl_primitive != DL_HP_PPA_ACK) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "get_dlpi_ppa: hpppa unexpected primitive ack 0x%x", | |
| (bpf_u_int32)dlp->dl_primitive); | |
| return (PCAP_ERROR); | |
| } | |
| if (ctl.len < DL_HP_PPA_ACK_SIZE) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "get_dlpi_ppa: hpppa ack too small (%d < %lu)", | |
| ctl.len, (unsigned long)DL_HP_PPA_ACK_SIZE); | |
| return (PCAP_ERROR); | |
| } | |
| /* allocate buffer */ | |
| if ((ppa_data_buf = (char *)malloc(dlp->dl_length)) == NULL) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "get_dlpi_ppa: hpppa malloc: %s", pcap_strerror(errno)); | |
| return (PCAP_ERROR); | |
| } | |
| ctl.maxlen = dlp->dl_length; | |
| ctl.len = 0; | |
| ctl.buf = (char *)ppa_data_buf; | |
| /* get the data */ | |
| if (getmsg(fd, &ctl, (struct strbuf *)NULL, &flags) < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "get_dlpi_ppa: hpppa getmsg: %s", pcap_strerror(errno)); | |
| free(ppa_data_buf); | |
| return (PCAP_ERROR); | |
| } | |
| if (ctl.len < dlp->dl_length) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "get_dlpi_ppa: hpppa ack too small (%d < %lu)", | |
| ctl.len, (unsigned long)dlp->dl_length); | |
| free(ppa_data_buf); | |
| return (PCAP_ERROR); | |
| } | |
| ap = (dl_hp_ppa_ack_t *)buf; | |
| ipstart = (dl_hp_ppa_info_t *)ppa_data_buf; | |
| ip = ipstart; | |
| #ifdef HAVE_HP_PPA_INFO_T_DL_MODULE_ID_1 | |
| /* | |
| * The "dl_hp_ppa_info_t" structure has a "dl_module_id_1" | |
| * member that should, in theory, contain the part of the | |
| * name for the device that comes before the unit number, | |
| * and should also have a "dl_module_id_2" member that may | |
| * contain an alternate name (e.g., I think Ethernet devices | |
| * have both "lan", for "lanN", and "snap", for "snapN", with | |
| * the former being for Ethernet packets and the latter being | |
| * for 802.3/802.2 packets). | |
| * | |
| * Search for the device that has the specified name and | |
| * instance number. | |
| */ | |
| for (i = 0; i < ap->dl_count; i++) { | |
| if ((strcmp((const char *)ip->dl_module_id_1, device) == 0 || | |
| strcmp((const char *)ip->dl_module_id_2, device) == 0) && | |
| ip->dl_instance_num == unit) | |
| break; | |
| ip = (dl_hp_ppa_info_t *)((u_char *)ipstart + ip->dl_next_offset); | |
| } | |
| #else | |
| /* | |
| * We don't have that member, so the search is impossible; make it | |
| * look as if the search failed. | |
| */ | |
| i = ap->dl_count; | |
| #endif | |
| if (i == ap->dl_count) { | |
| /* | |
| * Well, we didn't, or can't, find the device by name. | |
| * | |
| * HP-UX 10.20, whilst it has "dl_module_id_1" and | |
| * "dl_module_id_2" fields in the "dl_hp_ppa_info_t", | |
| * doesn't seem to fill them in unless the system is | |
| * at a reasonably up-to-date patch level. | |
| * | |
| * Older HP-UX 10.x systems might not have those fields | |
| * at all. | |
| * | |
| * Therefore, we'll search for the entry with the major | |
| * device number of a device with the name "/dev/<dev><unit>", | |
| * if such a device exists, as the old code did. | |
| */ | |
| snprintf(dname, sizeof(dname), "/dev/%s%d", device, unit); | |
| if (stat(dname, &statbuf) < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "stat: %s: %s", | |
| dname, pcap_strerror(errno)); | |
| return (PCAP_ERROR); | |
| } | |
| majdev = major(statbuf.st_rdev); | |
| ip = ipstart; | |
| for (i = 0; i < ap->dl_count; i++) { | |
| if (ip->dl_mjr_num == majdev && | |
| ip->dl_instance_num == unit) | |
| break; | |
| ip = (dl_hp_ppa_info_t *)((u_char *)ipstart + ip->dl_next_offset); | |
| } | |
| } | |
| if (i == ap->dl_count) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "can't find /dev/dlpi PPA for %s%d", device, unit); | |
| return (PCAP_ERROR_NO_SUCH_DEVICE); | |
| } | |
| if (ip->dl_hdw_state == HDW_DEAD) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "%s%d: hardware state: DOWN\n", device, unit); | |
| free(ppa_data_buf); | |
| return (PCAP_ERROR); | |
| } | |
| ppa = ip->dl_ppa; | |
| free(ppa_data_buf); | |
| return (ppa); | |
| } | |
| #endif | |
| #ifdef HAVE_HPUX9 | |
| /* | |
| * Under HP-UX 9, there is no good way to determine the ppa. | |
| * So punt and read it from /dev/kmem. | |
| */ | |
| static struct nlist nl[] = { | |
| #define NL_IFNET 0 | |
| { "ifnet" }, | |
| { "" } | |
| }; | |
| static char path_vmunix[] = "/hp-ux"; | |
| /* Determine ppa number that specifies ifname */ | |
| static int | |
| get_dlpi_ppa(register int fd, register const char *ifname, register int unit, | |
| register char *ebuf) | |
| { | |
| register const char *cp; | |
| register int kd; | |
| void *addr; | |
| struct ifnet ifnet; | |
| char if_name[sizeof(ifnet.if_name) + 1]; | |
| cp = strrchr(ifname, '/'); | |
| if (cp != NULL) | |
| ifname = cp + 1; | |
| if (nlist(path_vmunix, &nl) < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "nlist %s failed", | |
| path_vmunix); | |
| return (-1); | |
| } | |
| if (nl[NL_IFNET].n_value == 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, | |
| "could't find %s kernel symbol", | |
| nl[NL_IFNET].n_name); | |
| return (-1); | |
| } | |
| kd = open("/dev/kmem", O_RDONLY); | |
| if (kd < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "kmem open: %s", | |
| pcap_strerror(errno)); | |
| return (-1); | |
| } | |
| if (dlpi_kread(kd, nl[NL_IFNET].n_value, | |
| &addr, sizeof(addr), ebuf) < 0) { | |
| close(kd); | |
| return (-1); | |
| } | |
| for (; addr != NULL; addr = ifnet.if_next) { | |
| if (dlpi_kread(kd, (off_t)addr, | |
| &ifnet, sizeof(ifnet), ebuf) < 0 || | |
| dlpi_kread(kd, (off_t)ifnet.if_name, | |
| if_name, sizeof(ifnet.if_name), ebuf) < 0) { | |
| (void)close(kd); | |
| return (-1); | |
| } | |
| if_name[sizeof(ifnet.if_name)] = '\0'; | |
| if (strcmp(if_name, ifname) == 0 && ifnet.if_unit == unit) | |
| return (ifnet.if_index); | |
| } | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "Can't find %s", ifname); | |
| return (-1); | |
| } | |
| static int | |
| dlpi_kread(register int fd, register off_t addr, | |
| register void *buf, register u_int len, register char *ebuf) | |
| { | |
| register int cc; | |
| if (lseek(fd, addr, SEEK_SET) < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "lseek: %s", | |
| pcap_strerror(errno)); | |
| return (-1); | |
| } | |
| cc = read(fd, buf, len); | |
| if (cc < 0) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "read: %s", | |
| pcap_strerror(errno)); | |
| return (-1); | |
| } else if (cc != len) { | |
| snprintf(ebuf, PCAP_ERRBUF_SIZE, "short read (%d != %d)", cc, | |
| len); | |
| return (-1); | |
| } | |
| return (cc); | |
| } | |
| #endif | |
| pcap_t * | |
| pcap_create(const char *device, char *ebuf) | |
| { | |
| pcap_t *p; | |
| p = pcap_create_common(device, ebuf); | |
| if (p == NULL) | |
| return (NULL); | |
| p->send_fd = -1; /* it hasn't been opened yet */ | |
| p->activate_op = pcap_activate_dlpi; | |
| return (p); | |
| } |