blob: 2d31aa55676e61810701c902b41909d4caaca2b0 [file] [log] [blame] [edit]
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<!--
* t
****************************************************************************
* Copyright (c) 1998-2005,2006 Free Software Foundation, Inc. *
* *
* Permission is hereby granted, free of charge, to any person obtaining a *
* copy of this software and associated documentation files (the *
* "Software"), to deal in the Software without restriction, including *
* without limitation the rights to use, copy, modify, merge, publish, *
* distribute, distribute with modifications, sublicense, and/or sell *
* copies of the Software, and to permit persons to whom the Software is *
* furnished to do so, subject to the following conditions: *
* *
* The above copyright notice and this permission notice shall be included *
* in all copies or substantial portions of the Software. *
* *
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
* IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
* THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
* *
* Except as contained in this notice, the name(s) of the above copyright *
* holders shall not be used in advertising or otherwise to promote the *
* sale, use or other dealings in this Software without prior written *
* authorization. *
****************************************************************************
* @Id: tput.1,v 1.27 2006/12/24 18:11:31 tom Exp @
-->
<HTML>
<HEAD>
<TITLE>tput 1</TITLE>
<link rev=made href="mailto:bug-ncurses@gnu.org">
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</HEAD>
<BODY>
<H1>tput 1</H1>
<HR>
<PRE>
<!-- Manpage converted by man2html 3.0.1 -->
<STRONG><A HREF="tput.1.html">tput(1)</A></STRONG> <STRONG><A HREF="tput.1.html">tput(1)</A></STRONG>
</PRE>
<H2>NAME</H2><PRE>
<STRONG>tput</STRONG>, <STRONG>reset</STRONG> - initialize a terminal or query terminfo
database
</PRE>
<H2>SYNOPSIS</H2><PRE>
<STRONG>tput</STRONG> [<STRONG>-T</STRONG><EM>type</EM>] <EM>capname</EM> [<EM>parms</EM> ... ]
<STRONG>tput</STRONG> [<STRONG>-T</STRONG><EM>type</EM>] <STRONG>init</STRONG>
<STRONG>tput</STRONG> [<STRONG>-T</STRONG><EM>type</EM>] <STRONG>reset</STRONG>
<STRONG>tput</STRONG> [<STRONG>-T</STRONG><EM>type</EM>] <STRONG>longname</STRONG>
<STRONG>tput</STRONG> <STRONG>-S</STRONG> <STRONG>&lt;&lt;</STRONG>
<STRONG>tput</STRONG> <STRONG>-V</STRONG>
</PRE>
<H2>DESCRIPTION</H2><PRE>
The <STRONG>tput</STRONG> utility uses the <STRONG>terminfo</STRONG> database to make the
values of terminal-dependent capabilities and information
available to the shell (see <STRONG><A HREF="sh.1.html">sh(1)</A></STRONG>), to initialize or reset
the terminal, or return the long name of the requested
terminal type. The result depends upon the capability's
type:
string
<STRONG>tput</STRONG> writes the string to the standard output.
No trailing newline is supplied.
integer
<STRONG>tput</STRONG> writes the decimal value to the standard
output, with a trailing newline.
boolean
<STRONG>tput</STRONG> simply sets the exit code (<STRONG>0</STRONG> for TRUE if
the terminal has the capability, <STRONG>1</STRONG> for FALSE
if it does not), and writes nothing to the
standard output.
Before using a value returned on the standard output, the
application should test the exit code (e.g., <STRONG>$?</STRONG>, see
<STRONG><A HREF="sh.1.html">sh(1)</A></STRONG>) to be sure it is <STRONG>0</STRONG>. (See the <STRONG>EXIT</STRONG> <STRONG>CODES</STRONG> and <STRONG>DIAG-</STRONG>
<STRONG>NOSTICS</STRONG> sections.) For a complete list of capabilities
and the <EM>capname</EM> associated with each, see <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>.
<STRONG>-T</STRONG><EM>type</EM> indicates the <EM>type</EM> of terminal. Normally this
option is unnecessary, because the default is taken
from the environment variable <STRONG>TERM</STRONG>. If <STRONG>-T</STRONG> is spec-
ified, then the shell variables <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG>
will be ignored,and the operating system will not
be queried for the actual screen size.
<EM>capname</EM>
indicates the capability from the <STRONG>terminfo</STRONG>
database. When <STRONG>termcap</STRONG> support is compiled in, the
<STRONG>termcap</STRONG> name for the capability is also accepted.
<EM>parms</EM> If the capability is a string that takes parame-
ters, the arguments <EM>parms</EM> will be instantiated into
the string.
Most parameters are numbers. Only a few terminfo
capabilities require string parameters; <STRONG>tput</STRONG> uses a
table to decide which to pass as strings. Normally
<STRONG>tput</STRONG> uses <STRONG>tparm</STRONG> (3x) to perform the substitution.
If no parameters are given for the capability, <STRONG>tput</STRONG>
writes the string without performing the
substitution.
<STRONG>-S</STRONG> allows more than one capability per invocation of
<STRONG>tput</STRONG>. The capabilities must be passed to <STRONG>tput</STRONG> from
the standard input instead of from the command line
(see example). Only one <EM>capname</EM> is allowed per
line. The <STRONG>-S</STRONG> option changes the meaning of the <STRONG>0</STRONG>
and <STRONG>1</STRONG> boolean and string exit codes (see the EXIT
CODES section).
Again, <STRONG>tput</STRONG> uses a table and the presence of param-
eters in its input to decide whether to use <STRONG>tparm</STRONG>
(3x), and how to interpret the parameters.
<STRONG>-V</STRONG> reports the version of ncurses which was used in
this program, and exits.
<STRONG>init</STRONG> If the <STRONG>terminfo</STRONG> database is present and an entry
for the user's terminal exists (see <STRONG>-T</STRONG><EM>type</EM>, above),
the following will occur:
(1) if present, the terminal's initialization
strings will be output as detailed in the
<STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> section on <EM>Tabs</EM> <EM>and</EM> <EM>Initializa-</EM>
<EM>tion</EM>,
(2) any delays (e.g., newline) specified in the
entry will be set in the tty driver,
(3) tabs expansion will be turned on or off
according to the specification in the entry,
and
(4) if tabs are not expanded, standard tabs will
be set (every 8 spaces).
If an entry does not contain the information needed
for any of the four above activities, that activity
will silently be skipped.
<STRONG>reset</STRONG> Instead of putting out initialization strings, the
terminal's reset strings will be output if present
(<STRONG>rs1</STRONG>, <STRONG>rs2</STRONG>, <STRONG>rs3</STRONG>, <STRONG>rf</STRONG>). If the reset strings are not
present, but initialization strings are, the ini-
tialization strings will be output. Otherwise,
<STRONG>reset</STRONG> acts identically to <STRONG>init</STRONG>.
<STRONG>longname</STRONG>
If the <STRONG>terminfo</STRONG> database is present and an entry
for the user's terminal exists (see <STRONG>-T</STRONG><EM>type</EM> above),
then the long name of the terminal will be put out.
The long name is the last name in the first line of
the terminal's description in the <STRONG>terminfo</STRONG> database
[see <STRONG><A HREF="term.5.html">term(5)</A></STRONG>].
If <STRONG>tput</STRONG> is invoked by a link named <STRONG>reset</STRONG>, this has the
same effect as <STRONG>tput</STRONG> <STRONG>reset</STRONG>. See <STRONG>tset</STRONG> for comparison, which
has similar behavior.
</PRE>
<H2>EXAMPLES</H2><PRE>
<STRONG>tput</STRONG> <STRONG>init</STRONG>
Initialize the terminal according to the type of ter-
minal in the environmental variable <STRONG>TERM</STRONG>. This com-
mand should be included in everyone's .profile after
the environmental variable <STRONG>TERM</STRONG> has been exported, as
illustrated on the <STRONG><A HREF="profile.5.html">profile(5)</A></STRONG> manual page.
<STRONG>tput</STRONG> <STRONG>-T5620</STRONG> <STRONG>reset</STRONG>
Reset an AT&amp;T 5620 terminal, overriding the type of
terminal in the environmental variable <STRONG>TERM</STRONG>.
<STRONG>tput</STRONG> <STRONG>cup</STRONG> <STRONG>0</STRONG> <STRONG>0</STRONG>
Send the sequence to move the cursor to row <STRONG>0</STRONG>, column
<STRONG>0</STRONG> (the upper left corner of the screen, usually known
as the "home" cursor position).
<STRONG>tput</STRONG> <STRONG>clear</STRONG>
Echo the clear-screen sequence for the current termi-
nal.
<STRONG>tput</STRONG> <STRONG>cols</STRONG>
Print the number of columns for the current terminal.
<STRONG>tput</STRONG> <STRONG>-T450</STRONG> <STRONG>cols</STRONG>
Print the number of columns for the 450 terminal.
<STRONG>bold=`tput</STRONG> <STRONG>smso`</STRONG> <STRONG>offbold=`tput</STRONG> <STRONG>rmso`</STRONG>
Set the shell variables <STRONG>bold</STRONG>, to begin stand-out mode
sequence, and <STRONG>offbold</STRONG>, to end standout mode sequence,
for the current terminal. This might be followed by
a prompt: <STRONG>echo</STRONG> <STRONG>"${bold}Please</STRONG> <STRONG>type</STRONG> <STRONG>in</STRONG> <STRONG>your</STRONG> <STRONG>name:</STRONG>
<STRONG>${offbold}\c"</STRONG>
<STRONG>tput</STRONG> <STRONG>hc</STRONG>
Set exit code to indicate if the current terminal is
a hard copy terminal.
<STRONG>tput</STRONG> <STRONG>cup</STRONG> <STRONG>23</STRONG> <STRONG>4</STRONG>
Send the sequence to move the cursor to row 23, col-
umn 4.
<STRONG>tput</STRONG> <STRONG>cup</STRONG>
Send the terminfo string for cursor-movement, with no
parameters substituted.
<STRONG>tput</STRONG> <STRONG>longname</STRONG>
Print the long name from the <STRONG>terminfo</STRONG> database for
the type of terminal specified in the environmental
variable <STRONG>TERM</STRONG>.
<STRONG>tput</STRONG> <STRONG>-S</STRONG> <STRONG>&lt;&lt;!</STRONG>
<STRONG>&gt;</STRONG> <STRONG>clear</STRONG>
<STRONG>&gt;</STRONG> <STRONG>cup</STRONG> <STRONG>10</STRONG> <STRONG>10</STRONG>
<STRONG>&gt;</STRONG> <STRONG>bold</STRONG>
<STRONG>&gt;</STRONG> <STRONG>!</STRONG>
This example shows <STRONG>tput</STRONG> processing several capabili-
ties in one invocation. It clears the screen, moves
the cursor to position 10, 10 and turns on bold
(extra bright) mode. The list is terminated by an
exclamation mark (<STRONG>!</STRONG>) on a line by itself.
</PRE>
<H2>FILES</H2><PRE>
<STRONG>/usr/share/terminfo</STRONG>
compiled terminal description database
<STRONG>/usr/share/tabset/*</STRONG>
tab settings for some terminals, in a format appro-
priate to be output to the terminal (escape
sequences that set margins and tabs); for more
information, see the "Tabs and Initialization" sec-
tion of <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>
</PRE>
<H2>EXIT CODES</H2><PRE>
If the <STRONG>-S</STRONG> option is used, <STRONG>tput</STRONG> checks for errors from each
line, and if any errors are found, will set the exit code
to 4 plus the number of lines with errors. If no errors
are found, the exit code is <STRONG>0</STRONG>. No indication of which
line failed can be given so exit code <STRONG>1</STRONG> will never appear.
Exit codes <STRONG>2</STRONG>, <STRONG>3</STRONG>, and <STRONG>4</STRONG> retain their usual interpretation.
If the <STRONG>-S</STRONG> option is not used, the exit code depends on the
type of <EM>capname</EM>:
<EM>boolean</EM>
a value of <STRONG>0</STRONG> is set for TRUE and <STRONG>1</STRONG> for FALSE.
<EM>string</EM> a value of <STRONG>0</STRONG> is set if the <EM>capname</EM> is defined
for this terminal <EM>type</EM> (the value of <EM>capname</EM>
is returned on standard output); a value of <STRONG>1</STRONG>
is set if <EM>capname</EM> is not defined for this ter-
minal <EM>type</EM> (nothing is written to standard
output).
<EM>integer</EM>
a value of <STRONG>0</STRONG> is always set, whether or not
<EM>capname</EM> is defined for this terminal <EM>type</EM>. To
determine if <EM>capname</EM> is defined for this ter-
minal <EM>type</EM>, the user must test the value writ-
ten to standard output. A value of <STRONG>-1</STRONG> means
that <EM>capname</EM> is not defined for this terminal
<EM>type</EM>.
<EM>other</EM> <STRONG>reset</STRONG> or <STRONG>init</STRONG> may fail to find their respec-
tive files. In that case, the exit code is
set to 4 + <STRONG>errno</STRONG>.
Any other exit code indicates an error; see the DIAGNOS-
TICS section.
</PRE>
<H2>DIAGNOSTICS</H2><PRE>
<STRONG>tput</STRONG> prints the following error messages and sets the cor-
responding exit codes.
exit code error message
---------------------------------------------------------------------
<STRONG>0</STRONG> (<EM>capname</EM> is a numeric variable that is not specified in
the <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> database for this terminal type, e.g.
<STRONG>tput</STRONG> <STRONG>-T450</STRONG> <STRONG>lines</STRONG> and <STRONG>tput</STRONG> <STRONG>-T2621</STRONG> <STRONG>xmc</STRONG>)
<STRONG>1</STRONG> no error message is printed, see the <STRONG>EXIT</STRONG> <STRONG>CODES</STRONG> section.
<STRONG>2</STRONG> usage error
<STRONG>3</STRONG> unknown terminal <EM>type</EM> or no <STRONG>terminfo</STRONG> database
<STRONG>4</STRONG> unknown <STRONG>terminfo</STRONG> capability <EM>capname</EM>
<STRONG>&gt;4</STRONG> error occurred in -S
---------------------------------------------------------------------
</PRE>
<H2>PORTABILITY</H2><PRE>
The <STRONG>longname</STRONG> and <STRONG>-S</STRONG> options, and the parameter-substitu-
tion features used in the <STRONG>cup</STRONG> example, are not supported
in BSD curses or in AT&amp;T/USL curses before SVr4.
X/Open documents only the operands for <STRONG>clear</STRONG>, <STRONG>init</STRONG> and
<STRONG>reset</STRONG>. In this implementation, <STRONG>clear</STRONG> is part of the <EM>cap-</EM>
<EM>name</EM> support. Other implementations of <STRONG>tput</STRONG> on SVr4-based
systems such as Solaris, IRIX64 and HPUX as well as others
such as AIX and Tru64 provide support for <EM>capname</EM>
operands. A few platforms such as FreeBSD and NetBSD rec-
ognize termcap names rather than terminfo capability names
in their respective <STRONG>tput</STRONG> commands.
</PRE>
<H2>SEE ALSO</H2><PRE>
<STRONG><A HREF="clear.1.html">clear(1)</A></STRONG>, <STRONG><A HREF="stty.1.html">stty(1)</A></STRONG>, <STRONG><A HREF="tabs.1.html">tabs(1)</A></STRONG>, <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>.
This describes <STRONG>ncurses</STRONG> version 5.6 (patch 20081011).
<STRONG><A HREF="tput.1.html">tput(1)</A></STRONG>
</PRE>
<HR>
<ADDRESS>
Man(1) output converted with
<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a>
</ADDRESS>
</BODY>
</HTML>