blob: 1b2d0e09a9511820afcfab82fb58fd0ca2d4aa79 [file] [log] [blame] [edit]
/*
* (C) Copyright 2005
* Heiko Schocher, DENX Software Engineering, <hs@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#include <libfdt_env.h>
#include <fdt_support.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
/*
* I/O Port configuration table
*
* if conf is 1, then that port pin will be configured at boot time
* according to the five values podr/pdir/ppar/psor/pdat for that entry
*/
const iop_conf_t iop_conf_tab[4][32] = {
/* Port A configuration */
{ /* conf ppar psor pdir podr pdat */
/* PA31 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 COL */
/* PA30 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 CRS */
/* PA29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXER */
/* PA28 */ { 1, 1, 1, 1, 0, 0 }, /* FCC1 TXEN */
/* PA27 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXDV */
/* PA26 */ { 1, 1, 1, 0, 0, 0 }, /* FCC1 RXER */
/* PA25 */ { 0, 0, 0, 0, 1, 0 }, /* 8247_P0 */
#if defined(CONFIG_SYS_I2C_SOFT)
/* PA24 */ { 1, 0, 0, 0, 1, 1 }, /* I2C_SDA2 */
/* PA23 */ { 1, 0, 0, 1, 1, 1 }, /* I2C_SCL2 */
#else /* normal I/O port pins */
/* PA24 */ { 0, 0, 0, 1, 0, 0 }, /* PA24 */
/* PA23 */ { 0, 0, 0, 1, 0, 0 }, /* PA23 */
#endif
/* PA22 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DCD */
/* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD3 */
/* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD2 */
/* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD1 */
/* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* FCC1 TXD0 */
/* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD0 */
/* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD1 */
/* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD2 */
/* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 RXD3 */
/* PA13 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_RTS */
/* PA12 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_CTS */
/* PA11 */ { 0, 0, 0, 1, 1, 0 }, /* SMC2_DTR */
/* PA10 */ { 0, 0, 0, 0, 1, 0 }, /* SMC2_DSR */
/* PA9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC2 TXD */
/* PA8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC2 RXD */
/* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
/* PA6 */ { 0, 0, 0, 1, 0, 0 }, /* PA6 */
/* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
/* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
/* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
/* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
/* PA1 */ { 0, 0, 0, 1, 0, 0 }, /* PA1 */
/* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
},
/* Port B configuration */
{ /* conf ppar psor pdir podr pdat */
/* PB31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
/* PB30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
/* PB29 */ { 0, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
/* PB28 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
/* PB27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
/* PB26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
/* PB25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
/* PB24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
/* PB23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
/* PB22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
/* PB21 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
/* PB20 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
/* PB19 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
/* PB18 */ { 0, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
/* PB17 */ { 0, 0, 0, 0, 0, 0 }, /* PB17 */
/* PB16 */ { 0, 0, 0, 0, 0, 0 }, /* PB16 */
/* PB15 */ { 0, 0, 0, 0, 0, 0 }, /* PB15 */
/* PB14 */ { 0, 0, 0, 0, 0, 0 }, /* PB14 */
/* PB13 */ { 0, 0, 0, 0, 0, 0 }, /* PB13 */
/* PB12 */ { 0, 0, 0, 0, 0, 0 }, /* PB12 */
/* PB11 */ { 0, 0, 0, 0, 0, 0 }, /* PB11 */
/* PB10 */ { 0, 0, 0, 0, 0, 0 }, /* PB10 */
/* PB9 */ { 0, 0, 0, 0, 0, 0 }, /* PB9 */
/* PB8 */ { 0, 0, 0, 0, 0, 0 }, /* PB8 */
/* PB7 */ { 0, 0, 0, 0, 0, 0 }, /* PB7 */
/* PB6 */ { 0, 0, 0, 0, 0, 0 }, /* PB6 */
/* PB5 */ { 0, 0, 0, 0, 0, 0 }, /* PB5 */
/* PB4 */ { 0, 0, 0, 0, 0, 0 }, /* PB4 */
/* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
},
/* Port C */
{ /* conf ppar psor pdir podr pdat */
/* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
/* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
/* PC29 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CLSN */
/* PC28 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_OUT */
/* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* PC27 */
/* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
/* PC25 */ { 0, 1, 1, 0, 0, 0 }, /* SYNC_IN */
/* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
/* PC23 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII TX_CLK */
/* PC22 */ { 1, 1, 0, 0, 0, 0 }, /* FCC1 MII RX_CLK */
/* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
/* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
/* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK */
/* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII TX_CLK */
/* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
/* PC16 */ { 0, 0, 0, 1, 0, 0 }, /* PC16 */
/* PC15 */ { 0, 0, 0, 1, 0, 0 }, /* PC15 */
/* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
/* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
/* PC12 */ { 0, 0, 0, 1, 0, 0 }, /* PC12 */
/* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* PC11 */
/* PC10 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDC */
/* PC9 */ { 0, 0, 0, 1, 0, 0 }, /* FCC2 MDIO */
/* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
/* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
/* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
/* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
/* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
/* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
/* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
/* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
/* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
},
/* Port D */
{ /* conf ppar psor pdir podr pdat */
/* PD31 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
/* PD30 */ { 0, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
/* PD29 */ { 0, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
/* PD28 */ { 0, 0, 0, 1, 0, 0 }, /* PD28 */
/* PD27 */ { 0, 0, 0, 1, 0, 0 }, /* PD27 */
/* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
/* PD25 */ { 0, 1, 0, 0, 0, 0 }, /* SCC3_RX */
/* PD24 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_TX */
/* PD23 */ { 0, 1, 0, 1, 0, 0 }, /* SCC3_RTS */
/* PD22 */ { 0, 1, 0, 0, 0, 0 }, /* SCC4_RXD */
/* PD21 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_TXD */
/* PD20 */ { 0, 1, 0, 1, 0, 0 }, /* SCC4_RTS */
/* PD19 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_SEL */
/* PD18 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_CLK */
/* PD17 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MOSI */
/* PD16 */ { 0, 1, 1, 0, 0, 0 }, /* SPI_MISO */
#if defined(CONFIG_HARD_I2C)
/* PD15 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SDA1 */
/* PD14 */ { 1, 1, 1, 0, 1, 0 }, /* I2C SCL1 */
#else /* normal I/O port pins */
/* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* PD15 */
/* PD14 */ { 0, 1, 1, 0, 1, 0 }, /* PD14 */
#endif
/* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
/* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
/* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
/* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
/* PD9 */ { 0, 0, 0, 0, 0, 0 }, /* PD9 */
/* PD8 */ { 0, 0, 0, 0, 0, 0 }, /* PD8 */
/* PD7 */ { 1, 0, 0, 1, 0, 1 }, /* MII_MDIO */
/* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
/* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
/* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
/* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
/* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
}
};
/* ------------------------------------------------------------------------- */
/* Check Board Identity:
*/
int checkboard (void)
{
puts ("Board: IDS 8247\n");
return 0;
}
/* ------------------------------------------------------------------------- */
/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
*
* This routine performs standard 8260 initialization sequence
* and calculates the available memory size. It may be called
* several times to try different SDRAM configurations on both
* 60x and local buses.
*/
static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
ulong orx, volatile uchar * base)
{
volatile uchar c = 0xff;
volatile uint *sdmr_ptr;
volatile uint *orx_ptr;
ulong maxsize, size;
int i;
/* We must be able to test a location outsize the maximum legal size
* to find out THAT we are outside; but this address still has to be
* mapped by the controller. That means, that the initial mapping has
* to be (at least) twice as large as the maximum expected size.
*/
maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
sdmr_ptr = &memctl->memc_psdmr;
orx_ptr = &memctl->memc_or2;
*orx_ptr = orx;
/*
* Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
*
* "At system reset, initialization software must set up the
* programmable parameters in the memory controller banks registers
* (ORx, BRx, P/LSDMR). After all memory parameters are configured,
* system software should execute the following initialization sequence
* for each SDRAM device.
*
* 1. Issue a PRECHARGE-ALL-BANKS command
* 2. Issue eight CBR REFRESH commands
* 3. Issue a MODE-SET command to initialize the mode register
*
* The initial commands are executed by setting P/LSDMR[OP] and
* accessing the SDRAM with a single-byte transaction."
*
* The appropriate BRx/ORx registers have already been set when we
* get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
*/
*sdmr_ptr = sdmr | PSDMR_OP_PREA;
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
for (i = 0; i < 8; i++)
*base = c;
*sdmr_ptr = sdmr | PSDMR_OP_MRW;
*(base + CONFIG_SYS_MRS_OFFS) = c; /* setting MR on address lines */
*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
*base = c;
size = get_ram_size((long *)base, maxsize);
*orx_ptr = orx | ~(size - 1);
return (size);
}
phys_size_t initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immap->im_memctl;
long psize;
psize = 16 * 1024 * 1024;
memctl->memc_psrt = CONFIG_SYS_PSRT;
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
#ifndef CONFIG_SYS_RAMBOOT
/* 60x SDRAM setup:
*/
psize = try_init (memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR2,
(uchar *) CONFIG_SYS_SDRAM_BASE);
#endif /* CONFIG_SYS_RAMBOOT */
icache_enable ();
return (psize);
}
int misc_init_r (void)
{
gd->bd->bi_flashstart = 0xff800000;
return 0;
}
#if defined(CONFIG_CMD_NAND)
#include <nand.h>
#include <linux/mtd/mtd.h>
#include <asm/io.h>
static u8 hwctl;
static void ids_nand_hwctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
if (ctrl & NAND_CTRL_CHANGE) {
if ( ctrl & NAND_CLE ) {
hwctl |= 0x1;
writeb(0x00, (this->IO_ADDR_W + 0x0a));
} else {
hwctl &= ~0x1;
writeb(0x00, (this->IO_ADDR_W + 0x08));
}
if ( ctrl & NAND_ALE ) {
hwctl |= 0x2;
writeb(0x00, (this->IO_ADDR_W + 0x09));
} else {
hwctl &= ~0x2;
writeb(0x00, (this->IO_ADDR_W + 0x08));
}
if ( (ctrl & NAND_NCE) != NAND_NCE)
writeb(0x00, (this->IO_ADDR_W + 0x0c));
else
writeb(0x00, (this->IO_ADDR_W + 0x08));
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
static u_char ids_nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
return readb(this->IO_ADDR_R);
}
static void ids_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
struct nand_chip *nand = mtd->priv;
int i;
for (i = 0; i < len; i++) {
if (hwctl & 0x1)
writeb(buf[i], (nand->IO_ADDR_W + 0x02));
else if (hwctl & 0x2)
writeb(buf[i], (nand->IO_ADDR_W + 0x01));
else
writeb(buf[i], nand->IO_ADDR_W);
}
}
static void ids_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
struct nand_chip *this = mtd->priv;
int i;
for (i = 0; i < len; i++) {
buf[i] = readb(this->IO_ADDR_R);
}
}
static int ids_nand_dev_ready(struct mtd_info *mtd)
{
/* constant delay (see also tR in the datasheet) */
udelay(12);
return 1;
}
int board_nand_init(struct nand_chip *nand)
{
nand->ecc.mode = NAND_ECC_SOFT;
/* Reference hardware control function */
nand->cmd_ctrl = ids_nand_hwctrl;
nand->read_byte = ids_nand_read_byte;
nand->write_buf = ids_nand_write_buf;
nand->read_buf = ids_nand_read_buf;
nand->dev_ready = ids_nand_dev_ready;
nand->chip_delay = 12;
return 0;
}
#endif /* CONFIG_CMD_NAND */
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup( blob, bd);
}
#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */