boost_1_45_0/tools/build/v2/tools/stage.jam

# Copyright 2003 Dave Abrahams
# Copyright 2005, 2006 Rene Rivera
# Copyright 2002, 2003, 2004, 2005, 2006 Vladimir Prus
# Distributed under the Boost Software License, Version 1.0.
# (See accompanying file LICENSE_1_0.txt or http://www.boost.org/LICENSE_1_0.txt)

# This module defines the 'install' rule, used to copy a set of targets to a
# single location.

import targets ;
import "class" : new ;
import errors ;
import type ;
import generators ;
import feature ;
import project ;
import virtual-target ;
import path ;
import types/register ;


feature.feature <install-dependencies> : off on : incidental      ;
feature.feature <install-type>         :        : free incidental ;
feature.feature <install-source-root>  :        : free path       ;
feature.feature <so-version>           :        : free incidental ;

# If 'on', version symlinks for shared libraries will not be created. Affects
# Unix builds only.
feature.feature <install-no-version-symlinks> : on : optional incidental ;


class install-target-class : basic-target
{
    import feature ;
    import project ;
    import type ;
    import errors ;
    import generators ;
    import path ;
    import stage ;
    import "class" : new ;
    import property ;
    import property-set ;

    rule __init__ ( name-and-dir : project : sources * : requirements * : default-build * )
    {
        basic-target.__init__ $(name-and-dir) : $(project) : $(sources) :
            $(requirements) : $(default-build) ;
    }

    # If <location> is not set, sets it based on the project data.
    #
    rule update-location ( property-set )
    {
        local loc = [ $(property-set).get <location> ] ;
        if ! $(loc)
        {
            loc = [ path.root $(self.name) [ $(self.project).get location ] ] ;
            property-set = [ $(property-set).add-raw $(loc:G=<location>) ] ;
        }

        return $(property-set) ;
    }

    # Takes a target that is installed and a property set which is used when
    # installing.
    #
    rule adjust-properties ( target : build-property-set )
    {
        local ps-raw ;
        local a = [ $(target).action ] ;
        if $(a)
        {
            local ps = [ $(a).properties ] ;
            ps-raw = [ $(ps).raw ] ;

            # Unless <hardcode-dll-paths>true is in properties, which can happen
            # only if the user has explicitly requested it, nuke all <dll-path>
            # properties.
            if [ $(build-property-set).get <hardcode-dll-paths> ] != true
            {
                ps-raw = [ property.change $(ps-raw) : <dll-path> ] ;
            }

            # If any <dll-path> properties were specified for installing, add
            # them.
            local l = [ $(build-property-set).get <dll-path> ] ;
            ps-raw += $(l:G=<dll-path>) ;

            # Also copy <linkflags> feature from current build set, to be used
            # for relinking.
            local l = [ $(build-property-set).get <linkflags> ] ;
            ps-raw += $(l:G=<linkflags>) ;

            # Remove the <tag> feature on original targets.
            ps-raw = [ property.change $(ps-raw) : <tag> ] ;

            # And <location>. If stage target has another stage target in
            # sources, then we shall get virtual targets with the <location>
            # property set.
            ps-raw = [ property.change $(ps-raw) : <location> ] ;
        }

        local d = [ $(build-property-set).get <dependency> ] ;
        ps-raw += $(d:G=<dependency>) ;

        local d = [ $(build-property-set).get <location> ] ;
        ps-raw += $(d:G=<location>) ;

        local ns = [ $(build-property-set).get <install-no-version-symlinks> ] ;
        ps-raw += $(ns:G=<install-no-version-symlinks>) ;

        local d = [ $(build-property-set).get <install-source-root> ] ;
        # Make the path absolute: we shall use it to compute relative paths and
        # making the path absolute will help.
        if $(d)
        {
            d = [ path.root $(d) [ path.pwd ] ] ;
            ps-raw += $(d:G=<install-source-root>) ;
        }

        if $(ps-raw)
        {
            return [ property-set.create $(ps-raw) ]  ;
        }
        else
        {
            return [ property-set.empty ] ;
        }
    }

    rule construct ( name : source-targets * : property-set )
    {
        source-targets = [ targets-to-stage $(source-targets) :
            $(property-set) ] ;

        property-set = [ update-location $(property-set) ] ;

        local ename = [ $(property-set).get <name> ] ;

        if $(ename) && $(source-targets[2])
        {
            errors.error "When <name> property is used in 'install', only one"
                "source is allowed" ;
        }

        local result ;
        for local i in $(source-targets)
        {
            local staged-targets ;

            local new-properties = [ adjust-properties $(i) :
                $(property-set) ] ;

            # See if something special should be done when staging this type. It
            # is indicated by the presence of a special "INSTALLED_" type.
            local t = [ $(i).type ] ;
            if $(t) && [ type.registered INSTALLED_$(t) ]
            {
                if $(ename)
                {
                    errors.error "In 'install': <name> property specified with target that requires relinking." ;
                }
                else
                {
                    local targets = [ generators.construct $(self.project)
                        $(name) : INSTALLED_$(t) : $(new-properties) : $(i) ] ;
                    staged-targets += $(targets[2-]) ;
                }
            }
            else
            {
                staged-targets = [ stage.copy-file $(self.project) $(ename) :
                    $(i) : $(new-properties) ] ;
            }

            if ! $(staged-targets)
            {
                errors.error "Unable to generate staged version of " [ $(source).str ] ;
            }

            for t in $(staged-targets)
            {
                result += [ virtual-target.register $(t) ] ;
            }
        }

        return [ property-set.empty ] $(result) ;
    }

    # Given the list of source targets explicitly passed to 'stage', returns the
    # list of targets which must be staged.
    #
    rule targets-to-stage ( source-targets * : property-set )
    {
        local result ;

        # Traverse the dependencies, if needed.
        if [ $(property-set).get <install-dependencies> ] = "on"
        {
            source-targets = [ collect-targets $(source-targets) ] ;
        }

        # Filter the target types, if needed.
        local included-types = [ $(property-set).get <install-type> ] ;
        for local r in $(source-targets)
        {
            local ty = [ $(r).type ] ;
            if $(ty)
            {
                # Do not stage searched libs.
                if $(ty) != SEARCHED_LIB
                {
                    if $(included-types)
                    {
                        if [ include-type $(ty) : $(included-types) ]
                        {
                            result += $(r) ;
                        }
                    }
                    else
                    {
                        result += $(r) ;
                    }
                }
            }
            else if ! $(included-types)
            {
                # Don't install typeless target if there is an explicit list of
                # allowed types.
                result += $(r) ;
            }
        }

        return $(result) ;
    }

    # CONSIDER: figure out why we can not use virtual-target.traverse here.
    #
    rule collect-targets ( targets * )
    {
        # Find subvariants
        local s ;
        for local t in $(targets)
        {
            s += [ $(t).creating-subvariant ] ;
        }
        s = [ sequence.unique $(s) ] ;
        
        local result = [ new set ] ;
        $(result).add $(targets) ;
        
        for local i in $(s)
        {
            $(i).all-referenced-targets $(result) ;
        }
        local result2 ;
        for local r in [ $(result).list ]
        {
            if $(r:G) != <use>
            {
                result2 += $(r:G=) ;
            }
        }
        DELETE_MODULE $(result) ;
        result = [ sequence.unique $(result2) ] ;
    }

    # Returns true iff 'type' is subtype of some element of 'types-to-include'.
    #
    local rule include-type ( type : types-to-include * )
    {
        local found ;
        while $(types-to-include) && ! $(found)
        {
            if [ type.is-subtype $(type) $(types-to-include[1]) ]
            {
                found = true ;
            }
            types-to-include = $(types-to-include[2-]) ;
        }

        return $(found) ;
    }
}


# Creates a copy of target 'source'. The 'properties' object should have a
# <location> property which specifies where the target must be placed.
#
rule copy-file ( project name ? : source : properties )
{
    name ?= [ $(source).name ] ;
    local relative ;

    local new-a = [ new non-scanning-action $(source) : common.copy :
        $(properties) ] ;
    local source-root = [ $(properties).get <install-source-root> ] ;
    if $(source-root)
    {
        # Get the real path of the target. We probably need to strip relative
        # path from the target name at construction.
        local path = [ $(source).path ] ;
        path = [ path.root $(name:D) $(path) ] ;
        # Make the path absolute. Otherwise, it would be hard to compute the
        # relative path. The 'source-root' is already absolute, see the
        # 'adjust-properties' method above.
        path = [ path.root $(path) [ path.pwd ] ] ;

        relative = [ path.relative-to $(source-root) $(path) ] ;
    }

    # Note: Using $(name:D=$(relative)) might be faster here, but then we would
    # need to explicitly check that relative is not ".", otherwise we might get
    # paths like '<prefix>/boost/.', try to create it and mkdir would obviously
    # fail.
    name = [ path.join $(relative) $(name:D=) ] ;

    return [ new file-target $(name) exact : [ $(source).type ] : $(project) :
        $(new-a) ] ;
}


rule symlink ( name : project : source : properties )
{
    local a = [ new action $(source) : symlink.ln : $(properties) ] ;
    return [ new file-target $(name) exact : [ $(source).type ] : $(project) :
        $(a) ] ;
}


rule relink-file ( project : source : property-set  )
{
    local action = [ $(source).action ] ;
    local cloned-action = [ virtual-target.clone-action $(action) : $(project) :
        "" : $(property-set) ] ;
    return [ $(cloned-action).targets ] ;
}


# Declare installed version of the EXE type. Generator for this type will cause
# relinking to the new location.
type.register INSTALLED_EXE : : EXE ;


class installed-exe-generator : generator
{
    import type ;
    import property-set ;
    import modules ;
    import stage ;

    rule __init__ ( )
    {
        generator.__init__ install-exe : EXE : INSTALLED_EXE ;
    }

    rule run ( project name ? : property-set : source : multiple ? )
    {
        local need-relink ;
        
        if [ $(property-set).get <os> ] in NT CYGWIN ||
            [ $(property-set).get <target-os> ] in windows cygwin
        {
        }
        else
        {
            # See if the dll-path properties are not changed during
            # install. If so, copy, don't relink.
            local a = [ $(source).action ] ;
            local p = [ $(a).properties ] ;
            local original = [ $(p).get <dll-path> ] ;
            local current = [ $(property-set).get <dll-path> ] ;
            
            if $(current) != $(original)
            {
                need-relink = true ;
            }            
        }
        
            
        if $(need-relink)
        {
            return [ stage.relink-file $(project)
              : $(source) : $(property-set) ] ;
        }
        else
        {
            return [ stage.copy-file $(project)
              : $(source) : $(property-set) ] ;
        }
    }
}


generators.register [ new installed-exe-generator ] ;


# Installing a shared link on Unix might cause a creation of versioned symbolic
# links.
type.register INSTALLED_SHARED_LIB : : SHARED_LIB ;


class installed-shared-lib-generator : generator
{
    import type ;
    import property-set ;
    import modules ;
    import stage ;

    rule __init__ ( )
    {
        generator.__init__ install-shared-lib : SHARED_LIB
          : INSTALLED_SHARED_LIB ;
    }

    rule run ( project name ? : property-set : source : multiple ? )
    {
        if [ $(property-set).get <os> ] in NT CYGWIN ||
            [ $(property-set).get <target-os> ] in windows cygwin
        {
            local copied = [ stage.copy-file $(project) : $(source) :
                $(property-set) ] ;
            return [ virtual-target.register $(copied) ] ;
        }
        else
        {
            local a = [ $(source).action ] ;
            local copied ;
            if ! $(a)
            {
                # Non-derived file, just copy.
                copied = [ stage.copy-file $(project) : $(source) :
                    $(property-set) ] ;
            }
            else
            {
                local cp = [ $(a).properties ] ;
                local current-dll-path = [ $(cp).get <dll-path> ] ;
                local new-dll-path = [ $(property-set).get <dll-path> ] ;

                if $(current-dll-path) != $(new-dll-path)
                {
                    # Rpath changed, need to relink.
                    copied = [ stage.relink-file $(project) : $(source) :
                        $(property-set) ] ;
                }
                else
                {
                    copied = [ stage.copy-file $(project) : $(source) :
                        $(property-set) ] ;
                }
            }

            copied = [ virtual-target.register $(copied) ] ;

            local result = $(copied) ;
            # If the name is in the form NNN.XXX.YYY.ZZZ, where all 'X', 'Y' and
            # 'Z' are numbers, we need to create NNN.XXX and NNN.XXX.YYY
            # symbolic links.
            local m = [ MATCH (.*)\\.([0123456789]+)\\.([0123456789]+)\\.([0123456789]+)$
                : [ $(copied).name ] ] ;
            if $(m)
            {
                # Symlink without version at all is used to make
                # -lsome_library work.
                result += [ stage.symlink $(m[1]) : $(project) : $(copied) :
                    $(property-set) ] ;

                # Symlinks of some libfoo.N and libfoo.N.M are used so that
                # library can found at runtime, if libfoo.N.M.X has soname of
                # libfoo.N. That happens when the library makes some binary
                # compatibility guarantees. If not, it is possible to skip those
                # symlinks.
                local suppress =
                    [ $(property-set).get <install-no-version-symlinks> ] ;

                if $(suppress) != "on"
                {
                    result += [ stage.symlink $(m[1]).$(m[2]) : $(project)
                      : $(copied) : $(property-set) ] ;
                    result += [ stage.symlink $(m[1]).$(m[2]).$(m[3])  : $(project)
                      : $(copied) : $(property-set) ] ;
                }
            }

            return $(result) ;
        }
    }
}

generators.register [ new installed-shared-lib-generator ] ;


# Main target rule for 'install'.
#
rule install ( name : sources * : requirements * : default-build * )
{
    local project = [ project.current ] ;

    # Unless the user has explicitly asked us to hardcode dll paths, add
    # <hardcode-dll-paths>false in requirements, to override default value.
    if ! <hardcode-dll-paths>true in $(requirements)
    {
        requirements += <hardcode-dll-paths>false ;
    }

    if <tag> in $(requirements:G)
    {
        errors.user-error
            "The <tag> property is not allowed for the 'install' rule" ;
    }

    targets.main-target-alternative
      [ new install-target-class $(name) : $(project)
        : [ targets.main-target-sources $(sources) : $(name) ]
        : [ targets.main-target-requirements $(requirements) : $(project) ]
        : [ targets.main-target-default-build $(default-build) : $(project) ]
      ] ;
}


IMPORT $(__name__) : install : : install ;
IMPORT $(__name__) : install : : stage ;