| |
| |
| NOTE: For further changelog entries, see BitKeeper repository. |
| |
| |
| Tue Aug 17 2004 Jeff Garzik <jgarzik@pobox.com> |
| |
| * NEWS, configure.ac: Release version 2 |
| |
| Fri Jul 2 2004 Jeff Garzik <jgarzik@pobox.com> |
| |
| Merged |
| * fec_8xx.c, ethtool-util.h, Makefile.am: Add fec_8xx register dump. |
| Contributed by Pantelis Antoniou <panto@intracom.gr> |
| |
| * Update ethtool.c to iterate through a list of drivers |
| * Fixed fec_8xx.c warnings on 64-bit |
| |
| Fri Jul 2 2004 Jim Lewis <jim@jklewis.com> |
| |
| * pcnet32.c, ethtool-util.h, Makefile.am: Add pcnet32 register dump. |
| |
| Fri Apr 9 2004 Jason Lunz <lunz@reflexsecurity.com> |
| |
| * ethtool.c: Remove incorrect restriction on ethernet interface |
| names. |
| |
| Fri Apr 9 2004 OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
| |
| * ethtool.c: This fixes the bogus tail backslash that I did. |
| |
| Fri Apr 9 2004 Jim Lewis <jim@jklewis.com> |
| |
| * ethtool.c: Return results of self-test back to OS, |
| via exit(2). |
| |
| Fri Apr 9 2004 Jeb Cramer <cramerj@intel.com> |
| |
| * e1000.c: Update device id list and add printout of phy type in |
| register dump. Set default mac_type to 82543 since register offsets |
| haven't changed. |
| |
| Fri Apr 9 2004 Jeff Garzik <jgarzik@pobox.com> |
| |
| * configure.ac, Makefile.am, ethtool.c, etc.: |
| convert to more recent autoconf. |
| |
| Sat Aug 30 2003 OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
| |
| * ethtool.8, ethtool.c: ethtool register dump raw mode |
| |
| Sat Jul 19 2003 Scott Feldman <scott.feldman@intel.com> |
| |
| * ethtool.8, ethtool.c, ethtool-copy.h: |
| Add support for TSO get/set. Corresponds to NETIF_F_TSO. |
| Extended -k|K option to included tso, and changed meaning from |
| just "checksum/sg" to more general "offload". Now covers Rx/Tx |
| csum, SG, and TSO. |
| |
| Thu May 28 2003 Ganesh Venkatesan <ganesh.venkatesan@intel.com> |
| |
| * ethtool-copy.h: new definitions for 10GbE |
| |
| Thu May 28 2003 Scott Feldman <scott.feldman@intel.com> |
| |
| * ethtool.c: Add ethtool -E to write EEPROM byte. |
| * e100.c: Added MDI/MDI-X status to register dump. |
| |
| Thu May 28 2003 Reeja John <reeja.john@amd.com> |
| |
| * amd8111e.c: new file, support for AMD-8111e NICs |
| * ethtool.c: properly set ecmd.advertising |
| |
| Sat Mar 29 2003 OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> |
| |
| * realtek.c: clean up chip enumeration, support additional chips |
| |
| Fri Mar 28 2003 Jeb Cramer <cramerj@intel.com> |
| |
| * e1000.c: Update supported devices (82541 & 82547). Add bus type, |
| speed and width to register dump printout. |
| * ethtool.c (show_usage): Add -S to printout of supported commands. |
| |
| Tue Jan 22 2003 Jeff Garzik <jgarzik@pobox.com> |
| |
| * natsemi.c (PRINT_INTR, __print_intr): Decompose PRINT_INTR |
| macro into macro abuse and function call portions. Move the |
| actual function body to new static functoin __print_intr. |
| |
| This eliminates the annoying build warning :) |
| |
| Thu Jan 16 2003 Jeb Cramer <jeb.j.cramer@intel.com> |
| |
| * ethtool.c (do_regs, dump_eeprom): Fix memory leaks on failed |
| operations. Add error handling of dump_regs(). Modify printout of |
| eeprom dump to accomodate larger eeproms. |
| * e1000.c: Update supported devices. Add error conditions for |
| unsupported devices. |
| |
| Mon Oct 21 2002 Ben Collins <bcollins@debian.org> |
| |
| * ethtool.c: Add new parameters to -e, for raw EEPROM output, and |
| offset and length options. |
| * natsemi.c (natsemi_dump_eeprom): Show correct offset using new |
| offset feature above. |
| * tg3.c: New file, implements tg3_dump_eeprom. |
| * Makefile.am: Add it to the build sources. |
| * ethtool-util.h: Prototype tg3_dump_eeprom. |
| * ethtool.8: Document new -e options. |
| |
| Thu Oct 17 2002 Tim Hockin <thockin@sun.com> |
| |
| * ethtool.c: make calls to strtol() use base 0 |
| |
| Wed Sep 18 2002 Scott Feldman <scott.feldman@intel.com> |
| |
| * ethtool.c (dump_regs): call e100_dump_regs if e100 |
| * e100.c: new file |
| * ethtool-util.h: prototype e100_dump_regs |
| |
| Thu Jun 20 2002 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * ethtool.8: document new -S stats dump argument |
| * configure.in, NEWS: release version 1.6 |
| |
| Fri Jun 14 2002 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * realtek.c (realtek_dump_regs): dump legacy 8139 registers |
| * ethtool.c (do_gstats, doit, parse_cmdline): |
| support dumping of NIC-specific statistics |
| |
| Fri Jun 14 2002 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * realtek.c (realtek_dump_regs): dump RTL8139C+ registers |
| |
| Fri Jun 14 2002 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * realtek.c: new file, dumps RealTek RTL8169 PCI NIC's registers |
| * Makefile.am, ethtool.c, ethtool-util.h: use it |
| |
| Tue Jun 11 2002 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * NEWS: list new commands added recently |
| * ethtool.c (do_gcoalesce, do_scoalesce, dump_coalesce): new |
| (parse_cmdline, doit): handle get/set coalesce parameters (-c,-C) |
| (do_[gs]*): convert to use table-driven cmd line parsing |
| * ethtool.8: document -c and -C |
| |
| Tue Jun 11 2002 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * ethtool.c (do_gring, do_sring, dump_ring, |
| parse_ring_cmdline): new functions |
| (parse_cmdline, doit): handle get/set ring parameters (-g,-G) |
| (do_spause): fix off-by-one bugs |
| * ethtool.8: document -g and -G |
| |
| Tue Jun 11 2002 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * ethtool.c (do_gpause, do_spause, dump_pause, |
| parse_pause_cmdline): new functions |
| (parse_cmdline, doit): handle get/set pause parameters (-a,-A) |
| * ethtool.8: document -a, -A, -e, and -p |
| |
| Wed May 22 2002 Chris Leech <christopher.leech@intel.com> |
| Scott Feldman <scott.feldman@intel.com> |
| |
| * ethtool-copy.h: add support for ETHTOOL_PHYS_ID function. |
| * ethtool.c: add support for ETHTOOL_PHYS_ID function, add |
| support for e1000 reg dump. |
| * Makefile.am: add e1000.c |
| * e1000.c: reg dump support for Intel(R) PRO/1000 adapters. |
| * ethtool-util.h: add e1000 reg dump support. |
| |
| Sat May 11 2002 Eli Kupermann <eli.kupermann@intel.com> |
| |
| * ethtool.c (do_test): add support for online/offline test modes |
| Elsewhere: document "-t" arg usage, and handle usage |
| |
| Sat May 11 2002 Jes Sorensen <jes@wildopensource.com> |
| |
| * ethtool.c (dump_ecmd): If unknown value is |
| encountered in speed, duplex, or port ETHTOOL_GSET |
| return data, print the numeric value returned. |
| |
| Wed May 1 2002 Eli Kupermann <eli.kupermann@intel.com> |
| |
| * ethtool.8: document new -t test option |
| |
| Wed May 1 2002 Christoph Hellwig <hch@lst.de> |
| |
| * Makefile.am (dist-hook): Use $(top-srcdir) for refering to sources. |
| |
| Mon Apr 29 2002 Christoph Hellwig <hch@lst.de> |
| |
| * Makefile.am (SUBDIRS): Remove. |
| (RPMSRCS): Likewise. |
| (TMPDIR): Likewise. |
| (rpm): Likewise. |
| (EXTRA_DIST): Add ethtool.spec.in. |
| (dist-hook): New rule. Create rpm specfile. |
| * configure.in (AC_OUTPUT): Add ethtool.spec. |
| * ethtool.spec.in: New file. Rpm specfile template. |
| * redhat/ethtool.spec.in: Removed. |
| * redhat/Makefile.am: Removed. |
| |
| Wed Mar 20 2002 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * ethtool-copy.h: Merge coalescing param, ring |
| param, and pause param ioctl structs from kernel 2.5.7. |
| Merge ethtool_test changes fromkernel 2.5.7. |
| * ethtool: Update for ethtool_test cleanups. |
| |
| Wed Mar 20 2002 Eli Kupermann <eli.kupermann@intel.com> |
| |
| * ethtool.c: (do_test): new function |
| Elsewhere: add support for 'perform test' function, |
| via a new "-t" arg, by calling do_test. |
| |
| Sun Mar 3 2002 Brad Hards <bhards@bigpond.net.au> |
| |
| * ethtool.c (parse_cmdline): Support "usb" |
| as well as "eth" network interfaces. USB networking |
| uses a different prefix. |
| |
| Fri Feb 8 2002 "Noam, Amir" <amir.noam@intel.com>, |
| "Kupermann, Eli" <eli.kupermann@intel.com> |
| |
| * ethtool.c (dump_advertised): new function. |
| (dump_ecmd): Call it. |
| Elsewhere: reformat code. |
| |
| Wed Nov 28 2001 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * configure.in, Makefile.am, redhat/Makefile.am: |
| make sure redhat spec is included in dist tarball. |
| |
| Tue Nov 27 2001 Tim Hockin <thockin@sun.com> |
| |
| * natsemi.c: strings changes |
| * ethtool.c: print messagelevel as hex (netif_msg_* shows better :) |
| |
| Sun Nov 18 2001 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * NEWS: update with recent changes |
| * ethtool.8: phy address can be used if implemented in the |
| driver, so remove "Not used yet" remark. |
| |
| Sun Nov 18 2001 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * Makefile.am, de2104x.c, ethtool-util.h, ethtool.c: |
| Support register dumps for de2104x driver. |
| |
| Tue Nov 13 2001 Tim Hockin <thockin@sun.com> |
| |
| * natsemi.c, ethtool.c: use u8 data for ethtool_regs |
| * ethtool-copy.h: latest from kernel |
| * natsemi.c, ethtool.c: support ETHTOOL_GEEPROM via -e param |
| |
| Mon Nov 12 2001 Tim Hockin <thockin@sun.com> |
| |
| * natsemi.c: check version, conditionally print RFCR-indexed data |
| |
| Wed Nov 07 2001 Tim Hockin <thockin@sun.com> |
| |
| * ethtool.c: print less errors for unsupported ioctl()s |
| * ethtool.c: warn if all ioctl()s are unsupported or failed |
| * ethtool.c: change autoneg-restart mechanism to -r (as per jgarzik) |
| * ethtool.c: check for "eth" in devicename (per jg) |
| * ethtool.c: remove 'extraneous' braces |
| |
| Wed Nov 07 2001 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * ethtool.c, ethtool.8: support bnc port/media |
| |
| Tue Nov 06 2001 Tim Hockin <thockin@sun.com> |
| |
| * ethtool.c: clean up output for unhandled register dumps |
| * natsemi.c: finish pretty-printing register dumps |
| * ethtool.8: document -d option |
| * various: add copyright info, where applicable |
| * ethtool.c: be nicer about unsupported ioctl()s where possible |
| and be more verbose where nice is not an option. |
| |
| Mon Nov 05 2001 Tim Hockin <thockin@sun.com> |
| |
| * natsemi.c: first cut at 'pretty-printing' register dumps |
| |
| Fri Nov 02 2001 Tim Hockin <thockin@sun.com> |
| |
| * ethtool.c: add support for ETHTOOL_GREGS via -d (dump) flag |
| * ethtool.c: add support for device-specific dumps for known devices |
| * ethtool.c: make mode-specific handling allocate ifr_data |
| * Makefile.am: import ChangeLog to rpm specfile |
| * natsemi.c: added |
| * ethtool-util.h: added |
| |
| Thu Nov 01 2001 Tim Hockin <thockin@sun.com> |
| |
| * ethtool.c: add support for ETHTOOL_GLINK in output |
| * ethtool.c: add support for ETHTOOL_NWAY_RST via 'autoneg restart' |
| * ethtool.c: add support for ETHTOOL_[GS]MSGLVL via 'msglvl' param |
| * ethtool.8: add documentation for above |
| * ethtool-copy.h: updated to sync with kernel |
| |
| Fri Oct 26 2001 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * ethtool.8: Update contributors list, home page URL. |
| * ethtool.8: Much cleanup, no content change. |
| Contributed by Andre Majorel. |
| * ethtool.c: Clean up '-h' usage message. |
| Contributed by Andre Majorel. |
| |
| Fri Oct 26 2001 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * Configure.in: bump version to 1.4cvs |
| * Makefile.am: include ethtool-copy.h in list of sources |
| * ethtool-copy.h: |
| Import ethtool.h from kernel 2.4.13. |
| * ethtool.c: |
| Define SIOCETHTOOL if it is missing, |
| trim trailing whitespace. |
| * NEWS: update for these changes |
| |
| Wed Sep 19 2001 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * ethtool.c, ethtool-copy.h: |
| Import copy of kernel 2.4.10-pre12's ethtool.h. |
| |
| Wed Sep 19 2001 Tim Hockin <thockin@sun.com> |
| |
| * Makefile.am, redhat/ethtool.spec.in: |
| Basic "make rpm" support. |
| |
| Wed Sep 19 2001 Tim Hockin <thockin@sun.com> |
| |
| * AUTHORS, NEWS, ethtool.8, ethtool.c: |
| Wake-on-LAN support. |
| |
| Thu May 17 2001 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * configure.in, NEWS, README: Version 1.2 release |
| |
| * ethtool.c: Support ETHTOOL_GDRVINFO. |
| * ethtool.8: Document it. |
| |
| Fri Mar 20 2001 Jeff Garzik <jgarzik@mandrakesoft.com> |
| |
| * Makefile.am, configure.in, autogen.sh, NEWS, |
| ChangeLog, AUTHORS, README: |
| Add autoconf/automake support. |
| |