blob: 829ecc98bc247d4ef07b963f25dc0583050b77f9 [file] [log] [blame]
/*---------------------------------------------------------------
* Copyright (c) 1999,2000,2001,2002,2003
* The Board of Trustees of the University of Illinois
* All Rights Reserved.
*---------------------------------------------------------------
* Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software (Iperf) and associated
* documentation files (the "Software"), to deal in the Software
* without restriction, including without limitation the
* rights to use, copy, modify, merge, publish, distribute,
* sublicense, and/or sell copies of the Software, and to permit
* persons to whom the Software is furnished to do
* so, subject to the following conditions:
*
*
* Redistributions of source code must retain the above
* copyright notice, this list of conditions and
* the following disclaimers.
*
*
* Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimers in the documentation and/or other materials
* provided with the distribution.
*
*
* Neither the names of the University of Illinois, NCSA,
* nor the names of its contributors may be used to endorse
* or promote products derived from this Software without
* specific prior written permission.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE CONTIBUTORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
* ________________________________________________________________
* National Laboratory for Applied Network Research
* National Center for Supercomputing Applications
* University of Illinois at Urbana-Champaign
* http://www.ncsa.uiuc.edu
* ________________________________________________________________
*
* error.c
* by Mark Gates <mgates@nlanr.net>
* -------------------------------------------------------------------
* error handlers
* ------------------------------------------------------------------- */
#include "headers.h"
#include "util.h"
#ifdef __cplusplus
extern "C" {
#endif
#ifdef WIN32
/* -------------------------------------------------------------------
* Implement a simple Win32 strerror function for our purposes.
* These error values weren't handled by FormatMessage;
* any particular reason why not??
* ------------------------------------------------------------------- */
struct mesg {
DWORD err;
const char* str;
};
const struct mesg error_mesgs[] =
{
{ WSAEACCES, "Permission denied"},
{ WSAEADDRINUSE, "Address already in use"},
{ WSAEADDRNOTAVAIL, "Cannot assign requested address"},
{ WSAEAFNOSUPPORT, "Address family not supported by protocol family"},
{ WSAEALREADY, "Operation already in progress"},
{ WSAECONNABORTED, "Software caused connection abort"},
{ WSAECONNREFUSED, "Connection refused"},
{ WSAECONNRESET, "Connection reset by peer"},
{ WSAEDESTADDRREQ, "Destination address required"},
{ WSAEFAULT, "Bad address"},
{ WSAEHOSTDOWN, "Host is down"},
{ WSAEHOSTUNREACH, "No route to host"},
{ WSAEINPROGRESS, "Operation now in progress"},
{ WSAEINTR, "Interrupted function call."},
{ WSAEINVAL, "Invalid argument."},
{ WSAEISCONN, "Socket is already connected."},
{ WSAEMFILE, "Too many open files."},
{ WSAEMSGSIZE, "Message too long"},
{ WSAENETDOWN, "Network is down"},
{ WSAENETRESET, "Network dropped connection on reset"},
{ WSAENETUNREACH, "Network is unreachable"},
{ WSAENOBUFS, "No buffer space available."},
{ WSAENOPROTOOPT, "Bad protocol option."},
{ WSAENOTCONN, "Socket is not connected"},
{ WSAENOTSOCK, "Socket operation on non-socket."},
{ WSAEOPNOTSUPP, "Operation not supported"},
{ WSAEPFNOSUPPORT, "Protocol family not supported"},
{ WSAEPROCLIM, "Too many processes."},
{ WSAEPROTONOSUPPORT, "Protocol not supported"},
{ WSAEPROTOTYPE, "Protocol wrong type for socket"},
{ WSAESHUTDOWN, "Cannot send after socket shutdown"},
{ WSAESOCKTNOSUPPORT, "Socket type not supported."},
{ WSAETIMEDOUT, "Connection timed out."},
{ WSATYPE_NOT_FOUND, "Class type not found."},
{ WSAEWOULDBLOCK, "Resource temporarily unavailable"},
{ WSAHOST_NOT_FOUND, "Host not found."},
{ WSA_INVALID_HANDLE, "Specified event object handle is invalid."},
{ WSA_INVALID_PARAMETER, "One or more parameters are invalid."},
{ WSA_IO_INCOMPLETE, "Overlapped I/O event object not in signaled state."},
{ WSA_IO_PENDING, "Overlapped operations will complete later."},
{ WSA_NOT_ENOUGH_MEMORY, "Insufficient memory available."},
{ WSANOTINITIALISED, "Successful WSAStartup not yet performed."},
{ WSANO_DATA, "Valid name, no data record of requested type."},
{ WSANO_RECOVERY, "This is a non-recoverable error."},
{ WSASYSCALLFAILURE, "System call failure."},
{ WSASYSNOTREADY, "Network subsystem is unavailable."},
{ WSATRY_AGAIN, "Non-authoritative host not found."},
{ WSAVERNOTSUPPORTED, "WINSOCK.DLL version out of range."},
{ WSAEDISCON, "Graceful shutdown in progress."},
{ WSA_OPERATION_ABORTED, "Overlapped operation aborted."},
{ 0, "No error."}
/* These appeared in the documentation, but didn't compile.
* { WSAINVALIDPROCTABLE, "Invalid procedure table from service provider." },
* { WSAINVALIDPROVIDER, "Invalid service provider version number." },
* { WSAPROVIDERFAILEDINIT, "Unable to initialize a service provider." },
*/
}; /* end error_mesgs[] */
const char* winsock_strerror( DWORD inErrno );
/* -------------------------------------------------------------------
* winsock_strerror
*
* returns a string representing the error code. The error messages
* were taken from Microsoft's online developer library.
* ------------------------------------------------------------------- */
const char* winsock_strerror( DWORD inErrno ) {
const char* str = "Unknown error";
int i;
for ( i = 0; i < sizeof(error_mesgs); i++ ) {
if ( error_mesgs[i].err == inErrno ) {
str = error_mesgs[i].str;
break;
}
}
return str;
} /* end winsock_strerror */
#endif /* WIN32 */
/* -------------------------------------------------------------------
* warn
*
* Prints message and return
* ------------------------------------------------------------------- */
void warn( const char *inMessage, const char *inFile, int inLine ) {
fflush( 0 );
#ifdef NDEBUG
fprintf( stderr, "%s failed\n", inMessage );
#else
/* while debugging output file/line number also */
fprintf( stderr, "%s failed (%s:%d)\n", inMessage, inFile, inLine );
#endif
} /* end warn */
/* -------------------------------------------------------------------
* warn_errno
*
* Prints message and errno message, and return.
* ------------------------------------------------------------------- */
void warn_errno( const char *inMessage, const char *inFile, int inLine ) {
int my_err;
const char* my_str;
/* get platform's errno and error message */
#ifdef WIN32
my_err = WSAGetLastError();
my_str = winsock_strerror( my_err );
#else
my_err = errno;
my_str = strerror( my_err );
#endif
fflush( 0 );
#ifdef NDEBUG
fprintf( stderr, "%s failed: %s\n", inMessage, my_str );
#else
/* while debugging output file/line number and errno value also */
fprintf( stderr, "%s failed (%s:%d): %s (%d)\n",
inMessage, inFile, inLine, my_str, my_err );
#endif
} /* end warn_errno */
#ifdef __cplusplus
} /* end extern "C" */
#endif