Project import
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..b915e5c
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,104 @@
+#
+# Copyright (c) 2010-2011 Nest, Inc.
+# All rights reserved.
+#
+# This document is the property of Nest. It is considered
+# confidential and proprietary information.
+#
+# This document may not be reproduced or transmitted in any form,
+# in whole or in part, without the express written permission of
+# Nest.
+#
+# Description:
+# This file is the makefile for the user-level packet capture
+# library (libpcap).
+#
+
+BuildConfigSpecialized := No
+BuildProductSpecialized := No
+
+include pre.mak
+
+PackageName := libpcap
+
+PackageExtension := tar.gz
+PackageSeparator := -
+
+PackagePatchArgs := -p1
+
+PackageArchive := $(PackageName).$(PackageExtension)
+PackageSourceDir := $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile = $(call GenerateBuildPaths,Makefile)
+
+CleanPaths += $(PackageLicenseFile)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/LICENSE: source
+
+$(PackageLicenseFile): $(PackageSourceDir)/LICENSE
+ $(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+ $(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory) $(ResultDirectory)
+ $(Verbose)cd $(BuildDirectory) && \
+ $(CURDIR)/$(PackageSourceDir)/configure \
+ CC="$(CC)" AR=$(AR) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+ INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+ $(LibPcapPackageOptions) \
+ --without-libnl \
+ --build=$(HostTuple) \
+ --host=$(TargetTuple) \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --enable-ipv6
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) DESTDIR=$(ResultDirectory) install
+
+clean:
+ $(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/libpcap-1.3.0/CHANGES b/libpcap-1.3.0/CHANGES
new file mode 100644
index 0000000..4f7fa35
--- /dev/null
+++ b/libpcap-1.3.0/CHANGES
@@ -0,0 +1,672 @@
+Friday March 30, 2012. mcr@sandelman.ca
+Summary for 1.3.0 libpcap release
+ Handle DLT_PFSYNC in {FreeBSD, other *BSD+Mac OS X, other}.
+ Linux: Don't fail if netfilter isn't enabled in the kernel.
+ Add new link-layer type for NFC Forum LLCP.
+ Put the CANUSB stuff into EXTRA_DIST, so it shows up in the release tarball.
+ Add LINKTYPE_NG40/DLT_NG40.
+ Add DLT_MPEG_2_TS/LINKTYPE_MPEG_2_TS for MPEG-2 transport streams.
+ [PATCH] Fix AIX-3.5 crash with read failure during stress
+ AIX fixes.
+ Introduce --disable-shared configure option.
+ Added initial support for canusb devices.
+ Include the pcap(3PCAP) additions as 1.2.1 changes.
+ many updates to documentation: pcap.3pcap.in
+ Improve 'inbound'/'outbound' capture filters under Linux.
+ Note the cleanup of handling of new DLT_/LINKTYPE_ values.
+ On Lion, don't build for PPC.
+ For mac80211 devices we need to clean up monitor mode on exit.
+
+Friday December 9, 2011. guy@alum.mit.edu.
+Summary for 1.2.1 libpcap release
+ Update README file.
+ Fix typoes in README.linux file.
+ Clean up some compiler warnings.
+ Fix Linux compile problems and tests for ethtool.h.
+ Treat Debian/kFreeBSD and GNU/Hurd as systems with GNU
+ toolchains.
+ Support 802.1 QinQ as a form of VLAN in filters.
+ Treat "carp" as equivalent to "vrrp" in filters.
+ Fix code generated for "ip6 protochain".
+ Add some new link-layer header types.
+ Support capturing NetFilter log messages on Linux.
+ Clean up some error messages.
+ Turn off monitor mode on exit for mac80211 interfaces on Linux.
+ Fix problems turning monitor mode on for non-mac80211 interfaces
+ on Linux.
+ Properly fail if /sys/class/net or /proc/net/dev exist but can't
+ be opened.
+ Fail if pcap_activate() is called on an already-activated
+ pcap_t, and add a test program for that.
+ Fix filtering in pcap-ng files.
+ Don't build for PowerPC on Mac OS X Lion.
+ Simplify handling of new DLT_/LINKTYPE_ values.
+ Expand pcap(3PCAP) man page.
+
+Sunday July 24, 2011. mcr@sandelman.ca.
+Summary for 1.2 libpcap release
+ All of the changes listed below for 1.1.1 and 1.1.2.
+ Changes to error handling for pcap_findalldevs().
+ Fix the calculation of the frame size in memory-mapped captures.
+ Add a link-layer header type for STANAG 5066 D_PDUs.
+ Add a link-layer type for a variant of 3GPP TS 27.010.
+ Noted real nature of LINKTYPE_ARCNET.
+ Add a link-layer type for DVB-CI.
+ Fix configure-script discovery of VLAN acceleration support.
+ see http://netoptimizer.blogspot.com/2010/09/tcpdump-vs-vlan-tags.html
+ Linux, HP-UX, AIX, NetBSD and OpenBSD compilation/conflict fixes.
+ Protect against including AIX 5.x's <net/bpf.h> having been included.
+ Add DLT_DBUS, for raw D-Bus messages.
+ Treat either EPERM or EACCES as "no soup for you".
+ Changes to permissions on DLPI systems.
+ Add DLT_IEEE802_15_4_NOFCS for 802.15.4 interfaces.
+
+Fri. August 6, 2010. guy@alum.mit.edu.
+Summary for 1.1.2 libpcap release
+ Return DLT_ values, not raw LINKTYPE_ values from
+ pcap_datalink() when reading pcap-ng files
+ Add support for "wlan ra" and "wlan ta", to check the RA and TA
+ of WLAN frames that have them
+ Don't crash if "wlan addr{1,2,3,4}" are used without 802.11
+ headers
+ Do filtering on USB and Bluetooth capturing
+ On FreeBSD/SPARC64, use -fPIC - it's apparently necessary
+ Check for valid port numbers (fit in a 16-bit unsigned field) in
+ "port" filters
+ Reject attempts to put savefiles into non-blocking mode
+ Check for "no such device" for the "get the media types" ioctl
+ in *BSD
+ Improve error messages from bpf_open(), and let it do the error
+ handling
+ Return more specific errors from pcap_can_set_rfmon(); fix
+ documentation
+ Update description fetching code for FreeBSD, fix code for
+ OpenBSD
+ Ignore /sys/net/dev files if we get ENODEV for them, not just
+ ENXIO; fixes handling of bonding devices on Linux
+ Fix check for a constant 0 argument to BPF_DIV
+ Use the right version of ar when cross-building
+ Free any filter set on a savefile when the savefile is closed
+ Include the CFLAGS setting when configure was run in the
+ compiler flags
+ Add support for 802.15.4 interfaces on Linux
+
+Thu. April 1, 2010. guy@alum.mit.edu.
+Summary for 1.1.1 libpcap release
+ Update CHANGES to reflect more of the changes in 1.1.0.
+ Fix build on RHEL5.
+ Fix shared library build on AIX.
+
+Thu. March 11, 2010. ken@netfunctional.ca/guy@alum.mit.edu.
+Summary for 1.1.0 libpcap release
+ Add SocketCAN capture support
+ Add Myricom SNF API support
+ Update Endace DAG and ERF support
+ Add support for shared libraries on Solaris, HP-UX, and AIX
+ Build, install, and un-install shared libraries by default;
+ don't build/install shared libraries on platforms we don't support
+ Fix building from a directory other than the source directory
+ Fix compiler warnings and builds on some platforms
+ Update config.guess and config.sub
+ Support monitor mode on mac80211 devices on Linux
+ Fix USB memory-mapped capturing on Linux; it requires a new DLT_
+ value
+ On Linux, scan /sys/class/net for devices if we have it; scan
+ it, or /proc/net/dev if we don't have /sys/class/net, even if
+ we have getifaddrs(), as it'll find interfaces with no
+ addresses
+ Add limited support for reading pcap-ng files
+ Fix BPF driver-loading error handling on AIX
+ Support getting the full-length interface description on FreeBSD
+ In the lexical analyzer, free up any addrinfo structure we got back
+ from getaddrinfo().
+ Add support for BPF and libdlpi in OpenSolaris (and SXCE)
+ Hyphenate "link-layer" everywhere
+ Add /sys/kernel/debug/usb/usbmon to the list of usbmon locations
+ In pcap_read_linux_mmap(), if there are no frames available, call
+ poll() even if we're in non-blocking mode, so we pick up
+ errors, and check for the errors in question.
+ Note that poll() works on BPF devices is Snow Leopard
+ If an ENXIO or ENETDOWN is received, it may mean the device has
+ gone away. Deal with it.
+ For BPF, raise the default capture buffer size to from 32k to 512k
+ Support ps_ifdrop on Linux
+ Added a bunch of #ifdef directives to make wpcap.dll (WinPcap) compile
+ under cygwin.
+ Changes to Linux mmapped captures.
+ Fix bug where create_ring would fail for particular snaplen and
+ buffer size combinations
+ Update pcap-config so that it handles libpcap requiring
+ additional libraries
+ Add workaround for threadsafeness on Windows
+ Add missing mapping for DLT_ENC <-> LINKTYPE_ENC
+ DLT: Add DLT_CAN_SOCKETCAN
+ DLT: Add Solaris ipnet
+ Don't check for DLT_IPNET if it's not defined
+ Add link-layer types for Fibre Channel FC-2
+ Add link-layer types for Wireless HART
+ Add link-layer types for AOS
+ Add link-layer types for DECT
+ Autoconf fixes (AIX, HP-UX, OSF/1, Tru64 cleanups)
+ Install headers unconditionally, and include vlan.h/bluetooth.h if
+ enabled
+ Autoconf fixes+cleanup
+ Support enabling/disabling bluetooth (--{en,dis}able-bluetooth)
+ Support disabling SITA support (--without-sita)
+ Return -1 on failure to create packet ring (if supported but
+ creation failed)
+ Fix handling of 'any' device, so that it can be opened, and no longer
+ attempt to open it in Monitor mode
+ Add support for snapshot length for USB Memory-Mapped Interface
+ Fix configure and build on recent Linux kernels
+ Fix memory-mapped Linux capture to support pcap_next() and
+ pcap_next_ex()
+ Fixes for Linux USB capture
+ DLT: Add DLT_LINUX_EVDEV
+ DLT: Add DLT_GSMTAP_UM
+ DLT: Add DLT_GSMTAP_ABIS
+
+Mon. October 27, 2008. ken@netfunctional.ca. Summary for 1.0.0 libpcap release
+ Compile with IPv6 support by default
+ Compile with large file support on by default
+ Add pcap-config script, which deals with -I/-L flags for compiling
+ DLT: Add IPMB
+ DLT: Add LAPD
+ DLT: Add AX25 (AX.25 w/KISS header)
+ DLT: Add JUNIPER_ST
+ 802.15.4 support
+ Variable length 802.11 header support
+ X2E data type support
+ SITA ACN Interface support - see README.sita
+ Support for memory-mapped capture on Linux
+ Support for zerocopy BPF on platforms that support it
+ Support for setting buffer size when opening devices
+ Support for setting monitor mode when opening 802.11 devices
+ Better support for dealing with VLAN tagging/stripping on Linux
+ Fix dynamic library support on OSX
+ Return PCAP_ERROR_IFACE_NOT_UP if the interface isn't 'UP', so applications
+ can print better diagnostic information
+ Return PCAP_ERROR_PERM_DENIED if we don't have permission to open a device, so
+ applications can tell the user they need to go play with permissions
+ On Linux, ignore ENETDOWN so we can continue to capture packets if the
+ interface goes down and comes back up again.
+ On Linux, support new tpacket frame headers (2.6.27+)
+ On Mac OS X, add scripts for changing permissions on /dev/bpf* and launchd plist
+ On Solaris, support 'passive mode' on systems that support it
+ Fixes to autoconf and general build environment
+ Man page reorganization + cleanup
+ Autogenerate VERSION numbers better
+
+Mon. September 10, 2007. ken@xelerance.com. Summary for 0.9.8 libpcap release
+ Change build process to put public libpcap headers into pcap subir
+ DLT: Add value for IPMI IPMB packets
+ DLT: Add value for u10 Networks boards
+ Require <net/pfvar.h> for pf definitions - allows reading of pflog formatted
+ libpcap files on an OS other than where the file was generated
+
+Wed. April 25, 2007. ken@xelerance.com. Summary for 0.9.6 libpcap release
+
+ Put the public libpcap headers into a pcap subdirectory in both the
+ source directory and the target include directory, and have include
+ files at the top-level directory to include those headers, for
+ backwards compatibility.
+ Add Bluetooth support
+ Add USB capturing support on Linux
+ Add support for the binary USB sniffing interface in Linux
+ Add support for new FreeBSD BIOCSDIRECTION ioctl
+ Add additional filter operations for 802.11 frame types
+ Add support for filtering on MTP2 frame types
+ Propagate some changes from the main branch, so the x.9 branch has
+ all the DLT_ and LINKTYPE_ values that the main branch does
+ Reserved a DLT_ and SAVEFILE_ value for PPI (Per Packet Info)
+ encapsulated packets
+ Add LINKTYPE_ for IEEE 802.15.4, with address fields padded as done
+ by Linux drivers
+ Add LINKTYPE_ value corresponding to DLT_IEEE802_16_MAC_CPS.
+ Add DLT for IEEE 802.16 (WiMAX) MAC Common Part Sublayer
+ Add DLT for Bluetooth HCI UART transport layer
+ When building a shared library, build with "-fPIC" on Linux to support x86_64
+ Link with "$(CC) -shared" rather than "ld -shared" when building a
+ ".so" shared library
+ Add support for autoconf 2.60
+ Fixes to discard unread packets when changing filters
+ Changes to handle name changes in the DAG library resulting from
+ switching to libtool.
+ Add support for new DAG ERF types.
+ Add an explicit "-ldag" when building the shared library, so the DAG
+ library dependency is explicit.
+ Mac OSX fixes for dealing with "wlt" devices
+ Fixes in add_or_find_if() & pcap_findalldevs() to optimize generating
+ device lists
+ Fixed a bug in pcap_open_live(). The return value of PacketSetHwFilter
+ was not checked.
+
+Tue. September 19, 2006. ken@xelerance.com. Summary for 0.9.5 libpcap release
+
+ Support for LAPD frames with vISDN
+ Support for ERF on channelized T1/E1 cards via DAG API
+ Fix capitalization that caused issues crossc compiling on Linux
+ Better failure detection on PacketGetAdapterNames()
+ Fixes for MPLS packet generation (link layer)
+ OP_PACKET now matches the beginning of the packet, instead of
+ beginning+link-layer
+ Add DLT/LINKTYPE for carrying FRF.16 Multi-link Frame Relay
+ Fix allocation of buffer for list of link-layer types
+ Added a new DLT and LINKTYPE value for ARINC 653 Interpartition Communcation Messages
+ Fixed a typo in a DLT value: it should start with DLT_ and not LINKTYPE_
+ Redefined DLT_CAN20B and LINKTYPE_CAN20B as #190 (as this is the right value for CAN).
+ Added definition for DLT_A429 and LINKTYPE_A429 as #184.
+ Added a new DLT and LINKTYPE value for CAN v2.0B frames.
+ Add support for DLT_JUNIPER_VP.
+ Don't double-count received packets on Linux systems that
+ support the PACKET_STATISTICS getsockopt() argument on
+ PF_PACKET sockets.
+ Add support for DLT_IEEE802_11 and DLT_IEEE802_11_RADIO link
+ layers in Windows
+ Add support to build libpcap.lib and wpcap.dll under Cygnus and
+ MingW32.
+
+Mon. September 5, 2005. ken@xelerance.com. Summary for 0.9.4 libpcap release
+
+ Support for radiotap on Linux (Mike Kershaw)
+ Fixes for HP-UX
+ Support for additional Juniper link-layer types
+ Fixes for filters on MPLS-encapsulated packets
+ "vlan" filter fixed
+ "pppoed" and "pppoes" filters added; the latter modifies later
+ parts of the filter expression to look at the PPP headers and
+ headers in the PPP payload
+
+Tue. July 5, 2005. ken@xelerance.com. Summary for 0.9.3 libpcap release
+
+ Fixes for compiling on nearly every platform,
+ including improved 64bit support
+ MSDOS Support
+ Add support for sending packets
+ OpenBSD pf format support
+ IrDA capture (Linux only)
+
+Tue. March 30, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.3 release
+
+ Fixed minor problem in gencode.c that would appear on 64-bit
+ platforms.
+ Version number is now sane.
+
+Mon. March 29, 2004. mcr@sandelman.ottawa.on.ca. Summary for 3.8.2 release
+
+ updates for autoconf 2.5
+ fixes for ppp interfaces for freebsd 4.1
+ pcap gencode can generate code for 802.11, IEEE1394, and pflog.
+
+Wed. November 12, 2003. mcr@sandelman.ottawa.on.ca. Summary for 0.8 release
+
+ added pcap_findalldevs()
+ Win32 patches from NetGroup, Politecnico di Torino (Italy)
+ OpenBSD pf, DLT_PFLOG added
+ Many changes to ATM support.
+ lookup pcap_lookupnet()
+ Added DLT_ARCNET_LINUX, DLT_ENC, DLT_IEEE802_11_RADIO, DLT_SUNATM,
+ DLT_IP_OVER_FC, DLT_FRELAY, others.
+ Sigh. More AIX wonderfulness.
+ Document updates.
+ Changes to API: pcap_next_ex(), pcap_breakloop(), pcap_dump_flush(),
+ pcap_list_datalinks(), pcap_set_datalink(),
+ pcap_lib_version(), pcap_datalink_val_to_name(),
+ pcap_datalink_name_to_val(), new error returns.
+
+Tuesday, February 25, 2003. fenner@research.att.com. 0.7.2 release
+
+ Support link types that use 802.2 always, never, and sometimes.
+ Don't decrease the size of the BPF buffer from the default.
+ Support frame relay.
+ Handle 32-bit timestamps in DLPI, and pass the right buffer size.
+ Handle Linux systems with modern kernel but without
+ SOL_PACKET in the userland headers.
+ Linux support for ARPHRD_RAWHDLC.
+ Handle 32-bit timestamps in snoop.
+ Support eg (Octane/O2xxx/O3xxx Gigabit) devices.
+ Add new reserved DLT types.
+
+Monday October 23, 2001. mcr@sandelman.ottawa.on.ca. Summary for 0.7 release
+
+ Added pcap_findalldevs() call to get list of interfaces in a MI way.
+
+ pcap_stats() has been documented as to what its counters mean on
+ each platform.
+
+Tuesday January 9, 2001. guy@alum.mit.edu. Summary for 0.6 release
+
+ New Linux libpcap implementation, which, in 2.2 and later
+ kernels, uses PF_PACKET sockets and supports kernel packet
+ filtering (if compiled into the kernel), and supports the "any"
+ device for capturing on all interfaces. Cleans up promiscuous
+ mode better on pre-2.2 kernels, and has various other fixes
+ (handles 2.4 ARPHRD_IEEE802_TR, handles ISDN devices better,
+ doesn't show duplicate packets on loopback interface, etc.).
+
+ Fixed HP-UX libpcap implementation to correctly get the PPA for
+ an interface, to allow interfaces to be opened by interface name.
+
+ libpcap savefiles have system-independent link-layer type values
+ in the header, rather than sometimes platform-dependent DLT_
+ values, to make it easier to exchange capture files between
+ different OSes.
+
+ Non-standard capture files produced by some Linux tcpdumps, e.g.
+ the one from Red Hat Linux 6.2 and later, can now be read.
+
+ Updated autoconf stock files.
+
+ Filter expressions can filter on VLAN IDs and various OSI
+ protocols, and work on Token Ring (with non-source-routed
+ packets).
+
+ "pcap_open_dead()" added to allow compiling filter expressions
+ to pcap code without opening a capture device or capture file.
+
+ Header files fixed to allow use in C++ programs.
+
+ Removed dependancy on native headers for packet layout.
+ Removed Linux specific headers that were shipped.
+
+ Security fixes: Strcpy replaced with strlcpy, sprintf replaced
+ with snprintf.
+
+ Fixed bug that could cause subsequent "pcap_compile()"s to fail
+ erroneously after one compile failed.
+
+ Assorted other bug fixes.
+
+ README.aix and README.linux files added to describe
+ platform-specific issues.
+
+ "getifaddrs()" rather than SIOCGIFCONF used, if available.
+
+v0.5 Sat Jun 10 11:09:15 PDT 2000
+
+itojun@iijlab.net
+- Brought in KAME IPv6/IPsec bpf compiler.
+- Fixes for NetBSD.
+- Support added for OpenBSD DLT_LOOP and BSD/OS DLT_C_HDLC (Cisco HDLC),
+ and changes to work around different BSDs having different DLT_ types
+ with the same numeric value.
+
+Assar Westerlund <assar@sics.se>
+- Building outside the source code tree fixed.
+- Changed to write out time stamps with 32-bit seconds and microseconds
+ fields, regardless of whether those fields are 32 bits or 64 bits in
+ the OS's native "struct timeval".
+- Changed "pcap_lookupdev()" to dynamically grow the buffer into which
+ the list of interfaces is read as necessary in order to hold the
+ entire list.
+
+Greg Troxel <gdt@ir.bbn.com>
+- Added a new "pcap_compile_nopcap()", which lets you compile a filter
+ expression into a BPF program without having an open live capture or
+ capture file.
+
+v0.4 Sat Jul 25 12:40:09 PDT 1998
+
+- Fix endian problem with DLT_NULL devices. From FreeBSD via Bill
+ Fenner (fenner@parc.xerox.com)
+
+- Fix alignment problem with FDDI under DLPI. This was causing core
+ dumps under Solaris.
+
+- Added configure options to disable flex and bison. Resulted from a
+ bug report by barnett@grymoire.crd.ge.com (Bruce Barnett). Also added
+ options to disable gcc and to force a particular packet capture type.
+
+- Added support for Fore ATM interfaces (qaa and fa) under IRIX. Thanks
+ to John Hawkinson (jhawk@mit.edu)
+
+- Change Linux PPP and SLIP to use DLT_RAW since the kernel does not
+ supply any "link layer" data.
+
+- Change Linux to use SIOCGIFHWADDR ioctl to determine link layer type.
+ Thanks to Thomas Sailer (sailer@ife.ee.ethz.ch)
+
+- Change IRIX PPP to use DLT_RAW since the kernel does not supply any
+ "link layer" data.
+
+- Modified to support the new BSD/OS 2.1 PPP and SLIP link layer header
+ formats.
+
+- Added some new SGI snoop interface types. Thanks to Steve Alexander
+ (sca@refugee.engr.sgi.com)
+
+- Fixes for HP-UX 10.20 (which is similar to HP-UX 9). Thanks to
+ Richard Allen (ra@hp.is) and Steinar Haug (sthaug@nethelp.no)
+
+- Fddi supports broadcast as reported by Jeff Macdonald
+ (jeff@iacnet.com). Also correct ieee802 and arcnet.
+
+- Determine Linux pcap buffer size at run time or else it might not be
+ big enough for some interface types (e.g. FDDI). Thanks to Jes
+ Sorensen (Jes.Sorensen@cern.ch)
+
+- Fix some linux alignment problems.
+
+- Document promisc argument to pcap_open_live(). Reported by Ian Marsh
+ (ianm@sics.se)
+
+- Support Metricom radio packets under Linux. Thanks to Kevin Lai
+ (laik@gunpowder.stanford.edu)
+
+- Bind to interface name under Linux to avoid packets from multiple
+ interfaces on multi-homed hosts. Thanks to Kevin Lai
+ (laik@gunpowder.stanford.edu)
+
+- Change L_SET to SEEK_SET for HP-UX. Thanks to Roland Roberts
+ (rroberts@muller.com)
+
+- Fixed an uninitialized memory reference found by Kent Vander Velden
+ (graphix@iastate.edu)
+
+- Fixed lex pattern for IDs to allow leading digits. As reported by
+ Theo de Raadt (deraadt@cvs.openbsd.org)
+
+- Fixed Linux include file problems when using GNU libc.
+
+- Ifdef ARPHRD_FDDI since not all versions of the Linux kernel have it.
+ Reported reported by Eric Jacksch (jacksch@tenebris.ca)
+
+- Fixed bug in pcap_dispatch() that kept it from returning on packet
+ timeouts.
+
+- Changed ISLOOPBACK() macro when IFF_LOOPBACK isn't available to check
+ for "lo" followed by an eos or digit (newer versions of Linux
+ apparently call the loopback "lo" instead of "lo0").
+
+- Fixed Linux networking include files to use ints instead of longs to
+ avoid problems with 64 bit longs on the alpha. Thanks to Cristian
+ Gafton (gafton@redhat.com)
+
+v0.3 Sat Nov 30 20:56:27 PST 1996
+
+- Added Linux support.
+
+- Fixed savefile bugs.
+
+- Solaris x86 fix from Tim Rylance (t.rylance@elsevier.nl)
+
+- Add support for bpf kernel port filters.
+
+- Remove duplicate atalk protocol table entry. Thanks to Christian
+ Hopps (chopps@water.emich.edu)
+
+- Fixed pcap_lookupdev() to ignore nonexistent devices. This was
+ reported to happen under BSD/OS by David Vincenzetti
+ (vince@cryptonet.it)
+
+- Avoid solaris compiler warnings. Thanks to Bruce Barnett
+ (barnett@grymoire.crd.ge.com)
+
+v0.2.1 Sun Jul 14 03:02:26 PDT 1996
+
+- Fixes for HP-UX 10. Thanks in part to to Thomas Wolfram
+ (wolf@prz.tu-berlin.de) and Rick Jones (raj@hpisrdq.cup.hp.com)
+
+- Added support for SINIX. Thanks to Andrej Borsenkow
+ (borsenkow.msk@sni.de)
+
+- Fixes for AIX (although this system is not yet supported). Thanks to
+ John Hawkinson (jhawk@mit.edu)
+
+- Use autoconf's idea of the top level directory in install targets.
+ Thanks to John Hawkinson.
+
+- Add missing autoconf packet capture result message. Thanks to Bill
+ Fenner (fenner@parc.xerox.com)
+
+- Fixed padding problems in the pf module.
+
+- Fixed some more alignment problems on the alpha.
+
+- Added explicit netmask support. Thanks to Steve Nuchia
+ (steve@research.oknet.com)
+
+- Fixed to handle raw ip addresses such as 0.0.0.1 without "left
+ justifing"
+
+- Add "sca" keyword (for DEC cluster services) as suggested by Terry
+ Kennedy (terry@spcvxa.spc.edu)
+
+- Add "atalk" keyword as suggested by John Hawkinson.
+
+- Add "igrp" keyword.
+
+- Fixed HID definition in grammar.y to be a string, not a value.
+
+- Use $CC when checking gcc version. Thanks to Carl Lindberg
+ (carl_lindberg@blacksmith.com)
+
+- Removed obsolete reference to pcap_immediate() from the man page.
+ Michael Stolarchuk (mts@terminator.rs.itd.umich.edu)
+
+- DLT_NULL has a 4 byte family header. Thanks to Jeffrey Honig
+ (jch@bsdi.com)
+
+v0.2 Sun Jun 23 02:28:42 PDT 1996
+
+- Add support for HP-UX. Resulted from code contributed by Tom Murray
+ (tmurray@hpindck.cup.hp.com) and Philippe-Andri Prindeville
+ (philipp@res.enst.fr)
+
+- Update INSTALL with a reminder to install include files. Thanks to
+ Mark Andrews (mandrews@aw.sgi.com)
+
+- Fix bpf compiler alignment bug on the alpha.
+
+- Use autoconf to detect architectures that can't handle misaligned
+ accesses.
+
+- Added loopback support for snoop. Resulted from report Steve
+ Alexander (sca@engr.sgi.com)
+
+v0.1 Fri Apr 28 18:11:03 PDT 1995
+
+- Fixed compiler and optimizer bugs. The BPF filter engine uses unsigned
+ comparison operators, while the code generator and optimizer assumed
+ signed semantics in several places. Thanks to Charlie Slater
+ (cslater@imatek.com) for pointing this out.
+
+- Removed FDDI ifdef's, they aren't really needed. Resulted from report
+ by Gary Veum (veum@boa.gsfc.nasa.gov).
+
+- Add pcap-null.c which allows offline use of libpcap on systems that
+ don't support live package capture. This feature resulting from a
+ request from Jan van Oorschot (j.p.m.voorschot@et.tudelft.nl).
+
+- Make bpf_compile() reentrant. Fix thanks to Pascal Hennequin
+ (Pascal.Hennequin@hugo.int-evry.fr).
+
+- Port to GNU autoconf.
+
+- Fix pcap-dlpi.c to work with isdn. Resulted from report by Flemming
+ Johansen (fsj@csd.cri.dk).
+
+- Handle multi-digit interface unit numbers (aka ppa's) under dlpi.
+ Resulted from report by Daniel Ehrlich (ehrlich@cse.psu.edu).
+
+- Fix pcap-dlpi.c to work in non-promiscuous mode. Resulted from report
+ by Jeff Murphy (jcmurphy@acsu.buffalo.edu).
+
+- Add support for "long jumps". Thanks to Jeffrey Mogul
+ (mogul@pa.dec.com).
+
+- Fix minor problems when compiling with BDEBUG as noticed by Scott
+ Bertilson (scott@unet.umn.edu).
+
+- Declare sys_errlist "const char *const" to avoid problems under
+ FreeBSD. Resulted from report by jher@eden.com.
+
+v0.0.6 Fri Apr 28 04:07:13 PDT 1995
+
+- Add missing variable declaration missing from 0.0.6
+
+v0.0.5 Fri Apr 28 00:22:21 PDT 1995
+
+- Workaround for problems when pcap_read() returns 0 due to the timeout
+ expiring.
+
+v0.0.4 Thu Apr 20 20:41:48 PDT 1995
+
+- Change configuration to not use gcc v2 flags with gcc v1.
+
+- Fixed a bug in pcap_next(); if pcap_dispatch() returns 0, pcap_next()
+ should also return 0. Thanks to Richard Stevens (rstevens@noao.edu).
+
+- Fixed configure to test for snoop before dlpi to avoid problems under
+ IRIX 5. Thanks to J. Eric Townsend (jet@abulafia.genmagic.com).
+
+- Hack around deficiency in Ultrix's make.
+
+- Fix two bugs related to the Solaris pre-5.3.2 bufmod bug; handle
+ savefiles that have more than snapshot bytes of data in them (so we
+ can read old savefiles) and avoid writing such files.
+
+- Added checkioctl which is used with gcc to check that the
+ "fixincludes" script has been run.
+
+v0.0.3 Tue Oct 18 18:13:46 PDT 1994
+
+- Fixed configure to test for snoop before dlpi to avoid problems under
+ IRIX 5. Thanks to J. Eric Townsend (jet@abulafia.genmagic.com).
+
+v0.0.2 Wed Oct 12 20:56:37 PDT 1994
+
+- Implement timeout in the dlpi pcap_open_live(). Thanks to Richard
+ Stevens.
+
+- Determine pcap link type from dlpi media type. Resulted from report
+ by Mahesh Jethanandani (mahesh@npix.com).
+
+v0.0.1 Fri Jun 24 14:50:57 PDT 1994
+
+- Fixed bug in nit_setflags() in pcap-snit.c. The streams ioctl timeout
+ wasn't being initialized sometimes resulting in an "NIOCSFLAGS:
+ Invalid argument" error under OSF/1. Reported by Matt Day
+ (mday@artisoft.com) and Danny Mitzel (dmitzel@whitney.hitc.com).
+
+- Turn on FDDI support by default.
+
+v0.0 Mon Jun 20 19:20:16 PDT 1994
+
+- Initial release.
+
+- Fixed bug with greater/less keywords, reported by Mark Andrews
+ (mandrews@alias.com).
+
+- Fix bug where '|' was defined as BPF_AND instead of BPF_OR, reported
+ by Elan Amir (elan@leeb.cs.berkeley.edu).
+
+- Machines with little-endian byte ordering are supported thanks to
+ Jeff Mogul.
+
+- Add hack for version 2.3 savefiles which don't have caplen and len
+ swapped thanks to Vern Paxson.
+
+- Added "&&" and "||" aliases for "and" and "or" thanks to Vern Paxson.
+
+- Added length, inbound and outbound keywords.
diff --git a/libpcap-1.3.0/CREDITS b/libpcap-1.3.0/CREDITS
new file mode 100644
index 0000000..cfe84ba
--- /dev/null
+++ b/libpcap-1.3.0/CREDITS
@@ -0,0 +1,155 @@
+This file lists people who have contributed to libpcap:
+
+The current maintainers:
+ Bill Fenner <fenner at research dot att dot com>
+ Fulvio Risso <risso at polito dot it>
+ Guy Harris <guy at alum dot mit dot edu>
+ Hannes Gredler <hannes at juniper dot net>
+ Michael Richardson <mcr at sandelman dot ottawa dot on dot ca>
+
+Additional people who have contributed patches:
+
+ Alan Bawden <Alan at LCS dot MIT dot EDU>
+ Albert Chin <china at thewrittenword dot com>
+ Alexander 'Leo' Bergolth <Leo dot Bergolth at wu-wien dot ac dot at>
+ Alexey Kuznetsov <kuznet at ms2 dot inr dot ac dot ru>
+ Alon Bar-Lev <alonbl at sourceforge dot net>
+ Andrew Brown <atatat at atatdot dot net>
+ <andy-1 at sourceforge dot net>
+ Antti Kantee <pooka at netbsd dot org>
+ Arien Vijn <arienvijn at sourceforge dot net>
+ Arkadiusz Miskiewicz <misiek at pld dot org dot pl>
+ Armando L. Caro Jr. <acaro at mail dot eecis dot udel dot edu>
+ Assar Westerlund <assar at sics dot se>
+ Brian Ginsbach <ginsbach at cray dot com>
+ Charles M. Hannum <mycroft at netbsd dot org>
+ Chris G. Demetriou <cgd at netbsd dot org>
+ Chris Lightfoot <cwrl at users dot sourceforge dot net>
+ Chris Maynard <Chris dot Maynard at gtech dot com>
+ Chris Pepper <pepper at mail dot reppep dot com>
+ Christian Bell <csbell at myri dot com>
+ Christian Peron <csjp at freebsd dot org>
+ Daniele Orlandi <daniele at orlandi dot com>
+ Darren Reed <darrenr at sun dot com>
+ David Kaelbling <drk at sgi dot com>
+ David Young <dyoung at ojctech dot com>
+ Dean Gaudet <dean at arctic dot org>
+ dhruv <rsrivat at sourceforge dot net>
+ Don Ebright <Don dot Ebright at compuware dot com>
+ Dug Song <dugsong at monkey dot org>
+ Dustin Spicuzza <dustin at virtualroadside dot com>
+ Eric Anderson <anderse at hpl dot hp dot com>
+ Erik de Castro Lopo <erik dot de dot castro dot lopo at sensorynetworks dot com>
+ Felix Obenhuber <felix at obenhuber dot de>
+ Florent Drouin <Florent dot Drouin at alcatel-lucent dot fr>
+ Franz Schaefer <schaefer at mond dot at>
+ frederich <frederich at sourceforge dot net>
+ Fulko Hew <fulko dot hew at gmail dot com>
+ Fumiyuki Shimizu <fumifumi at abacustech dot jp>
+ Garrett Cooper <yaberauneya at sourceforge dot net>
+ Gianluca Varenni <gianluca dot varenni at gmail dot com>
+ Gilbert Hoyek <gil_hoyek at hotmail dot com>
+ Gisle Vanem <gvanem at broadpark dot no>
+ Graeme Hewson <ghewson at cix dot compulink dot co dot uk>
+ Greg Stark <gsstark at mit dot edu>
+ Greg Troxel <gdt at ir dot bbn dot com>
+ Gregor Maier <gregor at net dot in dot tum dot de>
+ Guillaume Pelat <endymion_ at users dot sourceforge dot net>
+ Hagen Paul Pfeifer <hagen at jauu dot net>
+ Henri Doreau <hdoreau at sourceforge dot net>
+ Hyung Sik Yoon <hsyn at kr dot ibm dot com>
+ Igor Khristophorov <igor at atdot dot org>
+ Jan-Philip Velders <jpv at veldersjes dot net>
+ Jason R. Thorpe <thorpej at netbsd dot org>
+ Javier Achirica <achirica at ttd dot net>
+ Jean Tourrilhes <jt at hpl dot hp dot com>
+ Jean-Louis Charton <Jean-Louis.CHARTON at oikialog dot com>
+ Jefferson Ogata <jogata at nodc dot noaa dot gov>
+ Jesper Dangaard Brouer <hawk at comx dot dk>
+ Jesper Peterson <jesper at endace dot com>
+ Joerg Mayer <jmayer at loplof dot de>
+ John Bankier <jbankier at rainfinity dot com>
+ Jon Lindgren <jonl at yubyub dot net>
+ Jon Smirl <jonsmirl at gmail dot com>
+ Juergen Schoenwaelder <schoenw at ibr dot cs dot tu-bs dot de>
+ Julien Moutinho <julm at savines dot alpes dot fr dot eu dot org>
+ Jung-uk Kim <jkim at FreeBSD dot org>
+ Kazushi Sugyo <sugyo at pb dot jp dot nec dot com>
+ Klaus Klein <kleink at netbsd dot org>
+ Koryn Grant <koryn at endace dot com>
+ Kris Katterjohn <katterjohn at gmail dot com>
+ Krzysztof Halasa <khc at pm dot waw dot pl>
+ Lorenzo Cavallaro <sullivan at sikurezza dot org>
+ Loris Degioanni <loris at netgroup-serv dot polito dot it>
+ Love Hörnquist-Åstrand <lha at stacken dot kth dot se>
+ Luis MartinGarcia <luis dot mgarc at gmail dot com>
+ Maciej W. Rozycki <macro at ds2 dot pg dot gda dot pl>
+ Marcus Felipe Pereira <marcus at task dot com dot br>
+ Mark C. Brown <mbrown at hp dot com>
+ Mark Pizzolato <List-tcpdump-workers at subscriptions dot pizzolato dot net>
+ Markus Mayer <markus_mayer at sourceforge dot net>
+ Martin Husemann <martin at netbsd dot org>
+ Márton Németh <nm127 at freemail dot hu>
+ Matthew Luckie <mjl at luckie dot org dot nz>
+ Max Laier <max at love2party dot net>
+ Mike Frysinger <vapier at gmail dot com>
+ Mike Kershaw <dragorn at kismetwireless dot net>
+ Mike Wiacek <mike at iroot dot net>
+ Miroslav Lichvar <mlichvar at redhat dot com>
+ Monroe Williams <monroe at pobox dot com>
+ <nvercamm at sourceforge dot net>
+ N. Leiten <nleiten at sourceforge dot net>
+ Nicolas Dade <ndade at nsd dot dyndns dot org>
+ Octavian Cerna <tavy at ylabs dot com>
+ Olaf Kirch <okir at caldera dot de>
+ Ollie Wild <aaw at users dot sourceforge dot net>
+ Onno van der Linden <onno at simplex dot nl>
+ Paolo Abeni <paolo dot abeni at email dot it>
+ Patrick Marie <mycroft at virgaria dot org>
+ Patrick McHardy <kaber at trash not net>
+ Paul Mundt <lethal at linux-sh dot org>
+ Pavel Kankovsky <kan at dcit dot cz>
+ Pawel Pokrywka <publicpp at gmail dot com>
+ Peter Fales <peter at fales-lorenz dot net>
+ Peter Jeremy <peter dot jeremy at alcatel dot com dot au>
+ Peter Volkov <pva at gentoo dot org>
+ Phil Wood <cpw at lanl dot gov>
+ Rafal Maszkowski <rzm at icm dot edu dot pl>
+ <rcb-isis at users dot sourceforge dot net>
+ Richard Stearn <richard at rns-stearn dot demon dot co dot uk>
+ Rick Jones <raj at cup dot hp dot com>
+ Robert Edmonds <stu-42 at sourceforge dot net>
+ Roberto Mariani <jelot-tcpdump at jelot dot it>
+ Romain Francoise <rfrancoise at debian dot org>
+ Sagun Shakya <sagun dot shakya at sun dot com>
+ Scott Barron <sb125499 at ohiou dot edu>
+ Scott Gifford <sgifford at tir dot com>
+ Scott Mcmillan <scott dot a dot mcmillan at intel dot com>
+ Sebastian Krahmer <krahmer at cs dot uni-potsdam dot de>
+ Sebastien Roy <Sebastien dot Roy at Sun dot COM>
+ Sepherosa Ziehau <sepherosa at gmail dot com>
+ Shaun Clowes <delius at progsoc dot uts dot edu dot au>
+ Solomon Peachy <pizza at shaftnet dot org>
+ Stefan Hudson <hudson at mbay dot net>
+ Stephen Donnelly <stephen at endace dot com>
+ Takashi Yamamoto <yamt at mwd dot biglobe dot ne dot jp>
+ Tanaka Shin-ya <zstanaka at archer dot livedoor dot com>
+ Tobias Poschwatta <posch at sourceforge dot net>
+ Tony Li <tli at procket dot com>
+ Torsten Landschoff <torsten at debian dot org>
+ Uns Lider <unslider at miranda dot org>
+ Uwe Girlich <Uwe dot Girlich at philosys dot de>
+ Wesley Shields <wxs at FreeBSD dot org>
+ Xianjie Zhang <xzhang at cup dot hp dot com>
+ Xin Li <delphij at FreeBSD dot org>
+ Yen Yen Lim
+ Yvan Vanhullebus <vanhu at sourceforge dot net>
+ Yoann Vandoorselaere <yoann at prelude-ids dot org>
+
+The original LBL crew:
+ Steve McCanne
+ Craig Leres
+ Van Jacobson
+
+Past maintainers:
+ Jun-ichiro itojun Hagino <itojun at iijlab dot net>
diff --git a/libpcap-1.3.0/ChmodBPF/ChmodBPF b/libpcap-1.3.0/ChmodBPF/ChmodBPF
new file mode 100755
index 0000000..ee37121
--- /dev/null
+++ b/libpcap-1.3.0/ChmodBPF/ChmodBPF
@@ -0,0 +1,33 @@
+#! /bin/sh
+
+. /etc/rc.common
+
+StartService ()
+{
+ #
+ # Unfortunately, Mac OS X's devfs is based on the old FreeBSD
+ # one, not the current one, so there's no way to configure it
+ # to create BPF devices with particular owners or groups.
+ # This startup item will make it owned by the admin group,
+ # with permissions rw-rw----, so that anybody in the admin
+ # group can use programs that capture or send raw packets.
+ #
+ # Change this as appropriate for your site, e.g. to make
+ # it owned by a particular user without changing the permissions,
+ # so only that user and the super-user can capture or send raw
+ # packets, or give it the permissions rw-r-----, so that
+ # only the super-user can send raw packets but anybody in the
+ # admin group can capture packets.
+ #
+ chgrp admin /dev/bpf*
+ chmod g+rw /dev/bpf*
+}
+
+StopService ()
+{
+ return 0;
+}
+
+RestartService () { StartService; }
+
+RunService "$1"
diff --git a/libpcap-1.3.0/ChmodBPF/StartupParameters.plist b/libpcap-1.3.0/ChmodBPF/StartupParameters.plist
new file mode 100644
index 0000000..cba2166
--- /dev/null
+++ b/libpcap-1.3.0/ChmodBPF/StartupParameters.plist
@@ -0,0 +1,4 @@
+{
+ Description = "Change BPF permissions";
+ Provides = ("ChmodBPF");
+}
diff --git a/libpcap-1.3.0/INSTALL.txt b/libpcap-1.3.0/INSTALL.txt
new file mode 100644
index 0000000..58d8e3c
--- /dev/null
+++ b/libpcap-1.3.0/INSTALL.txt
@@ -0,0 +1,403 @@
+@(#) $Header: /tcpdump/master/libpcap/INSTALL.txt,v 1.29 2008-06-12 20:21:51 guy Exp $ (LBL)
+
+To build libpcap, run "./configure" (a shell script). The configure
+script will determine your system attributes and generate an
+appropriate Makefile from Makefile.in. Next run "make". If everything
+goes well you can su to root and run "make install". However, you need
+not install libpcap if you just want to build tcpdump; just make sure
+the tcpdump and libpcap directory trees have the same parent
+directory.
+
+If configure says:
+
+ configure: warning: cannot determine packet capture interface
+ configure: warning: (see INSTALL for more info)
+
+then your system either does not support packet capture or your system
+does support packet capture but libpcap does not support that
+particular type. (If you have HP-UX, see below.) If your system uses a
+packet capture not supported by libpcap, please send us patches; don't
+forget to include an autoconf fragment suitable for use in
+configure.in.
+
+It is possible to override the default packet capture type, although
+the circumstance where this works are limited. For example if you have
+installed bpf under SunOS 4 and wish to build a snit libpcap:
+
+ ./configure --with-pcap=snit
+
+Another example is to force a supported packet capture type in the case
+where the configure scripts fails to detect it.
+
+You will need an ANSI C compiler to build libpcap. The configure script
+will abort if your compiler is not ANSI compliant. If this happens, use
+the GNU C compiler, available via anonymous ftp:
+
+ ftp://ftp.gnu.org/pub/gnu/gcc/
+
+If you use flex, you must use version 2.4.6 or higher. The configure
+script automatically detects the version of flex and will not use it
+unless it is new enough. You can use "flex -V" to see what version you
+have (unless it's really old). The current version of flex is available
+via anonymous ftp:
+
+ ftp://ftp.ee.lbl.gov/flex-*.tar.Z
+
+As of this writing, the current version is 2.5.4.
+
+If you use bison, you must use flex (and visa versa). The configure
+script automatically falls back to lex and yacc if both flex and bison
+are not found.
+
+Sometimes the stock C compiler does not interact well with flex and
+bison. The list of problems includes undefined references for alloca.
+You can get around this by installing gcc or manually disabling flex
+and bison with:
+
+ ./configure --without-flex --without-bison
+
+If your system only has AT&T lex, this is okay unless your libpcap
+program uses other lex/yacc generated code. (Although it's possible to
+map the yy* identifiers with a script, we use flex and bison so we
+don't feel this is necessary.)
+
+Some systems support the Berkeley Packet Filter natively; for example
+out of the box OSF and BSD/OS have bpf. If your system does not support
+bpf, you will need to pick up:
+
+ ftp://ftp.ee.lbl.gov/bpf-*.tar.Z
+
+Note well: you MUST have kernel source for your operating system in
+order to install bpf. An exception is SunOS 4; the bpf distribution
+includes replacement kernel objects for some of the standard SunOS 4
+network device drivers. See the bpf INSTALL document for more
+information.
+
+If you use Solaris, there is a bug with bufmod(7) that is fixed in
+Solaris 2.3.2 (aka SunOS 5.3.2). Setting a snapshot length with the
+broken bufmod(7) results in data be truncated from the FRONT of the
+packet instead of the end. The work around is to not set a snapshot
+length but this results in performance problems since the entire packet
+is copied to user space. If you must run an older version of Solaris,
+there is a patch available from Sun; ask for bugid 1149065. After
+installing the patch, use "setenv BUFMOD_FIXED" to enable use of
+bufmod(7). However, we recommend you run a more current release of
+Solaris.
+
+If you use the SPARCompiler, you must be careful to not use the
+/usr/ucb/cc interface. If you do, you will get bogus warnings and
+perhaps errors. Either make sure your path has /opt/SUNWspro/bin
+before /usr/ucb or else:
+
+ setenv CC /opt/SUNWspro/bin/cc
+
+before running configure. (You might have to do a "make distclean"
+if you already ran configure once).
+
+Also note that "make depend" won't work; while all of the known
+universe uses -M, the SPARCompiler uses -xM to generate makefile
+dependencies.
+
+If you are trying to do packet capture with a FORE ATM card, you may or
+may not be able to. They usually only release their driver in object
+code so unless their driver supports packet capture, there's not much
+libpcap can do.
+
+If you get an error like:
+
+ tcpdump: recv_ack: bind error 0x???
+
+when using DLPI, look for the DL_ERROR_ACK error return values, usually
+in /usr/include/sys/dlpi.h, and find the corresponding value.
+
+Under {DEC OSF/1, Digital UNIX, Tru64 UNIX}, packet capture must be
+enabled before it can be used. For instructions on how to enable packet
+filter support, see:
+
+ ftp://ftp.digital.com/pub/Digital/dec-faq/Digital-UNIX
+
+Look for the "How do I configure the Berkeley Packet Filter and capture
+tcpdump traces?" item.
+
+Once you enable packet filter support, your OSF system will support bpf
+natively.
+
+Under Ultrix, packet capture must be enabled before it can be used. For
+instructions on how to enable packet filter support, see:
+
+ ftp://ftp.digital.com/pub/Digital/dec-faq/ultrix
+
+If you use HP-UX, you must have at least version 9 and either the
+version of cc that supports ANSI C (cc -Aa) or else use the GNU C
+compiler. You must also buy the optional streams package. If you don't
+have:
+
+ /usr/include/sys/dlpi.h
+ /usr/include/sys/dlpi_ext.h
+
+then you don't have the streams package. In addition, we believe you
+need to install the "9.X LAN and DLPI drivers cumulative" patch
+(PHNE_6855) to make the version 9 DLPI work with libpcap.
+
+The DLPI streams package is standard starting with HP-UX 10.
+
+The HP implementation of DLPI is a little bit eccentric. Unlike
+Solaris, you must attach /dev/dlpi instead of the specific /dev/*
+network pseudo device entry in order to capture packets. The PPA is
+based on the ifnet "index" number. Under HP-UX 9, it is necessary to
+read /dev/kmem and the kernel symbol file (/hp-ux). Under HP-UX 10,
+DLPI can provide information for determining the PPA. It does not seem
+to be possible to trace the loopback interface. Unlike other DLPI
+implementations, PHYS implies MULTI and SAP and you get an error if you
+try to enable more than one promiscuous mode at a time.
+
+It is impossible to capture outbound packets on HP-UX 9. To do so on
+HP-UX 10, you will, apparently, need a late "LAN products cumulative
+patch" (at one point, it was claimed that this would be PHNE_18173 for
+s700/10.20; at another point, it was claimed that the required patches
+were PHNE_20892, PHNE_20725 and PHCO_10947, or newer patches), and to do
+so on HP-UX 11 you will, apparently, need the latest lancommon/DLPI
+patches and the latest driver patch for the interface(s) in use on HP-UX
+11 (at one point, it was claimed that patches PHNE_19766, PHNE_19826,
+PHNE_20008, and PHNE_20735 did the trick).
+
+Furthermore, on HP-UX 10, you will need to turn on a kernel switch by
+doing
+
+ echo 'lanc_outbound_promisc_flag/W 1' | adb -w /stand/vmunix /dev/mem
+
+You would have to arrange that this happen on reboots; the right way to
+do that would probably be to put it into an executable script file
+"/sbin/init.d/outbound_promisc" and making
+"/sbin/rc2.d/S350outbound_promisc" a symbolic link to that script.
+
+Finally, testing shows that there can't be more than one simultaneous
+DLPI user per network interface.
+
+If you use Linux, this version of libpcap is known to compile and run
+under Red Hat 4.0 with the 2.0.25 kernel. It may work with earlier 2.X
+versions but is guaranteed not to work with 1.X kernels. Running more
+than one libpcap program at a time, on a system with a 2.0.X kernel, can
+cause problems since promiscuous mode is implemented by twiddling the
+interface flags from the libpcap application; the packet capture
+mechanism in the 2.2 and later kernels doesn't have this problem. Also,
+packet timestamps aren't very good. This appears to be due to haphazard
+handling of the timestamp in the kernel.
+
+Note well: there is rumoured to be a version of tcpdump floating around
+called 3.0.3 that includes libpcap and is supposed to support Linux.
+You should be advised that neither the Network Research Group at LBNL
+nor the Tcpdump Group ever generated a release with this version number.
+The LBNL Network Research Group notes with interest that a standard
+cracker trick to get people to install trojans is to distribute bogus
+packages that have a version number higher than the current release.
+They also noted with annoyance that 90% of the Linux related bug reports
+they got are due to changes made to unofficial versions of their page.
+If you are having trouble but aren't using a version that came from
+tcpdump.org, please try that before submitting a bug report!
+
+On Linux, libpcap will not work if the kernel does not have the packet
+socket option enabled; see the README.linux file for information about
+this.
+
+If you use AIX, you may not be able to build libpcap from this release.
+We do not have an AIX system in house so it's impossible for us to test
+AIX patches submitted to us. We are told that you must link against
+/lib/pse.exp, that you must use AIX cc or a GNU C compiler newer than
+2.7.2, and that you may need to run strload before running a libpcap
+application.
+
+Read the README.aix file for information on installing libpcap and
+configuring your system to be able to support libpcap.
+
+If you use NeXTSTEP, you will not be able to build libpcap from this
+release.
+
+If you use SINIX, you should be able to build libpcap from this
+release. It is known to compile and run on SINIX-Y/N 5.42 with the C-DS
+V1.0 or V1.1 compiler. But note that in some releases of SINIX, yacc
+emits incorrect code; if grammar.y fails to compile, change every
+occurence of:
+
+ #ifdef YYDEBUG
+
+to:
+ #if YYDEBUG
+
+Another workaround is to use flex and bison.
+
+If you use SCO, you might have trouble building libpcap from this
+release. We do not have a machine running SCO and have not had reports
+of anyone successfully building on it; the current release of libpcap
+does not compile on SCO OpenServer 5. Although SCO apparently supports
+DLPI to some extent, the DLPI in OpenServer 5 is very non-standard, and
+it appears that completely new code would need to be written to capture
+network traffic. SCO do not appear to provide tcpdump binaries for
+OpenServer 5 or OpenServer 6 as part of SCO Skunkware:
+
+ http://www.sco.com/skunkware/
+
+If you use UnixWare, you might be able to build libpcap from this
+release, or you might not. We do not have a machine running UnixWare,
+so we have not tested it; however, SCO provide packages for libpcap
+0.6.2 and tcpdump 3.7.1 in the UnixWare 7/Open UNIX 8 part of SCO
+Skunkware, and the source package for libpcap 0.6.2 is not changed from
+the libpcap 0.6.2 source release, so this release of libpcap might also
+build without changes on UnixWare 7.
+
+If linking tcpdump fails with "Undefined: _alloca" when using bison on
+a Sun4, your version of bison is broken. In any case version 1.16 or
+higher is recommended (1.14 is known to cause problems 1.16 is known to
+work). Either pick up a current version from:
+
+ ftp://ftp.gnu.org/pub/gnu/bison
+
+or hack around it by inserting the lines:
+
+ #ifdef __GNUC__
+ #define alloca __builtin_alloca
+ #else
+ #ifdef sparc
+ #include <alloca.h>
+ #else
+ char *alloca ();
+ #endif
+ #endif
+
+right after the (100 line!) GNU license comment in bison.simple, remove
+grammar.[co] and fire up make again.
+
+If you use SunOS 4, your kernel must support streams NIT. If you run a
+libpcap program and it dies with:
+
+ /dev/nit: No such device
+
+You must add streams NIT support to your kernel configuration, run
+config and boot the new kernel.
+
+If you are running a version of SunOS earlier than 4.1, you will need
+to replace the Sun supplied /sys/sun{3,4,4c}/OBJ/nit_if.o with the
+appropriate version from this distribution's SUNOS4 subdirectory and
+build a new kernel:
+
+ nit_if.o.sun3-sunos4 (any flavor of sun3)
+ nit_if.o.sun4c-sunos4.0.3c (SS1, SS1+, IPC, SLC, etc.)
+ nit_if.o.sun4-sunos4 (Sun4's not covered by
+ nit_if.o.sun4c-sunos4.0.3c)
+
+These nit replacements fix a bug that makes nit essentially unusable in
+pre-SunOS 4.1. In addition, our sun4c-sunos4.0.3c nit gives you
+timestamps to the resolution of the SS-1 clock (1 us) rather than the
+lousy 20ms timestamps Sun gives you (tcpdump will print out the full
+timestamp resolution if it finds it's running on a SS-1).
+
+FILES
+-----
+CHANGES - description of differences between releases
+ChmodBPF/* - Mac OS X startup item to set ownership and permissions
+ on /dev/bpf*
+CREDITS - people that have helped libpcap along
+INSTALL.txt - this file
+LICENSE - the license under which tcpdump is distributed
+Makefile.in - compilation rules (input to the configure script)
+README - description of distribution
+README.aix - notes on using libpcap on AIX
+README.dag - notes on using libpcap to capture on Endace DAG devices
+README.hpux - notes on using libpcap on HP-UX
+README.linux - notes on using libpcap on Linux
+README.macosx - notes on using libpcap on Mac OS X
+README.septel - notes on using libpcap to capture on Intel/Septel devices
+README.sita - notes on using libpcap to capture on SITA devices
+README.tru64 - notes on using libpcap on Digital/Tru64 UNIX
+README.Win32 - notes on using libpcap on Win32 systems (with WinPcap)
+SUNOS4 - pre-SunOS 4.1 replacement kernel nit modules
+VERSION - version of this release
+acconfig.h - support for post-2.13 autoconf
+aclocal.m4 - autoconf macros
+arcnet.h - ARCNET definitions
+atmuni31.h - ATM Q.2931 definitions
+bpf/net - copy of bpf_filter.c
+bpf_dump.c - BPF program printing routines
+bpf_filter.c - symlink to bpf/net/bpf_filter.c
+bpf_image.c - BPF disassembly routine
+config.guess - autoconf support
+config.h.in - autoconf input
+config.sub - autoconf support
+configure - configure script (run this first)
+configure.in - configure script source
+dlpisubs.c - DLPI-related functions for pcap-dlpi.c and pcap-libdlpi.c
+dlpisubs.h - DLPI-related function declarations
+etherent.c - /etc/ethers support routines
+ethertype.h - Ethernet protocol types and names definitions
+fad-getad.c - pcap_findalldevs() for systems with getifaddrs()
+fad-gifc.c - pcap_findalldevs() for systems with only SIOCGIFLIST
+fad-glifc.c - pcap_findalldevs() for systems with SIOCGLIFCONF
+fad-null.c - pcap_findalldevs() for systems without capture support
+fad-sita.c - pcap_findalldevs() for systems with SITA support
+fad-win32.c - pcap_findalldevs() for WinPcap
+filtertest.c - test program for BPF compiler
+findalldevstest.c - test program for pcap_findalldevs()
+gencode.c - BPF code generation routines
+gencode.h - BPF code generation definitions
+grammar.y - filter string grammar
+ieee80211.h - 802.11 definitions
+inet.c - network routines
+install-sh - BSD style install script
+lbl/os-*.h - OS-dependent defines and prototypes
+llc.h - 802.2 LLC SAP definitions
+missing/* - replacements for missing library functions
+mkdep - construct Makefile dependency list
+msdos/* - drivers for MS-DOS capture support
+nametoaddr.c - hostname to address routines
+nlpid.h - OSI network layer protocol identifier definitions
+net - symlink to bpf/net
+optimize.c - BPF optimization routines
+packaging - packaging information for building libpcap RPMs
+pcap/bluetooth.h - public definition of DLT_BLUETOOTH_HCI_H4_WITH_PHDR header
+pcap/bpf.h - BPF definitions
+pcap/namedb.h - public libpcap name database definitions
+pcap/pcap.h - public libpcap definitions
+pcap/sll.h - public definition of DLT_LINUX_SLL header
+pcap/usb.h - public definition of DLT_USB header
+pcap-bpf.c - BSD Packet Filter support
+pcap-bpf.h - header for backwards compatibility
+pcap-bt-linux.c - Bluetooth capture support for Linux
+pcap-bt-linux.h - Bluetooth capture support for Linux
+pcap-dag.c - Endace DAG device capture support
+pcap-dag.h - Endace DAG device capture support
+pcap-dlpi.c - Data Link Provider Interface support
+pcap-dos.c - MS-DOS capture support
+pcap-dos.h - headers for MS-DOS capture support
+pcap-enet.c - enet support
+pcap-int.h - internal libpcap definitions
+pcap-libdlpi.c - Data Link Provider Interface support for systems with libdlpi
+pcap-linux.c - Linux packet socket support
+pcap-namedb.h - header for backwards compatibility
+pcap-nit.c - SunOS Network Interface Tap support
+pcap-nit.h - SunOS Network Interface Tap definitions
+pcap-null.c - dummy monitor support (allows offline use of libpcap)
+pcap-pf.c - Ultrix and Digital/Tru64 UNIX Packet Filter support
+pcap-pf.h - Ultrix and Digital/Tru64 UNIX Packet Filter definitions
+pcap-septel.c - Intel/Septel device capture support
+pcap-septel.h - Intel/Septel device capture support
+pcap-sita.c - SITA device capture support
+pcap-sita.h - SITA device capture support
+pcap-sita.html - SITA device capture documentation
+pcap-stdinc.h - includes and #defines for compiling on Win32 systems
+pcap-snit.c - SunOS 4.x STREAMS-based Network Interface Tap support
+pcap-snoop.c - IRIX Snoop network monitoring support
+pcap-usb-linux.c - USB capture support for Linux
+pcap-usb-linux.h - USB capture support for Linux
+pcap-win32.c - WinPcap capture support
+pcap.3pcap - manual entry for the library
+pcap.c - pcap utility routines
+pcap.h - header for backwards compatibility
+pcap_*.3pcap - manual entries for library functions
+pcap-filter.4 - manual entry for filter syntax
+pcap-linktype.4 - manual entry for link-layer header types
+ppp.h - Point to Point Protocol definitions
+runlex.sh - wrapper for Lex/Flex
+savefile.c - offline support
+scanner.l - filter string scanner
+sunatmpos.h - definitions for SunATM capturing
+Win32 - headers and routines for building on Win32 systems
diff --git a/libpcap-1.3.0/LICENSE b/libpcap-1.3.0/LICENSE
new file mode 100644
index 0000000..dea5f7d
--- /dev/null
+++ b/libpcap-1.3.0/LICENSE
@@ -0,0 +1,19 @@
+License: BSD
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ 3. The names of the authors may not be used to endorse or promote
+ products derived from this software without specific prior
+ written permission.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/libpcap-1.3.0/Makefile.in b/libpcap-1.3.0/Makefile.in
new file mode 100644
index 0000000..772cc7d
--- /dev/null
+++ b/libpcap-1.3.0/Makefile.in
@@ -0,0 +1,735 @@
+# Copyright (c) 1993, 1994, 1995, 1996
+# The Regents of the University of California. All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that: (1) source code distributions
+# retain the above copyright notice and this paragraph in its entirety, (2)
+# distributions including binary code include the above copyright notice and
+# this paragraph in its entirety in the documentation or other materials
+# provided with the distribution, and (3) all advertising materials mentioning
+# features or use of this software display the following acknowledgement:
+# ``This product includes software developed by the University of California,
+# Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
+# the University nor the names of its contributors may be used to endorse
+# or promote products derived from this software without specific prior
+# written permission.
+# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+#
+# @(#) $Header: /tcpdump/master/libpcap/Makefile.in,v 1.142 2008-11-22 17:30:24 guy Exp $ (LBL)
+
+#
+# Various configurable paths (remember to edit Makefile.in, not Makefile)
+#
+
+# Top level hierarchy
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+# Pathname of directory to install the configure program
+bindir = @bindir@
+# Pathname of directory to install the include files
+includedir = @includedir@
+# Pathname of directory to install the library
+libdir = @libdir@
+# Pathname of directory to install the man pages
+mandir = @mandir@
+
+# VPATH
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+#
+# You shouldn't need to edit anything below.
+#
+
+LD = /usr/bin/ld
+CC = @CC@
+AR = @AR@
+CCOPT = @V_CCOPT@
+INCLS = -I. @V_INCLS@
+DEFS = @DEFS@ @V_DEFS@
+ADDLOBJS = @ADDLOBJS@
+ADDLARCHIVEOBJS = @ADDLARCHIVEOBJS@
+LIBS = @LIBS@
+CFLAGS = @CFLAGS@
+LDFLAGS = @LDFLAGS@
+DYEXT = @DYEXT@
+V_RPATH_OPT = @V_RPATH_OPT@
+PROG=libpcap
+
+# Standard CFLAGS
+FULL_CFLAGS = $(CCOPT) $(INCLS) $(DEFS) $(CFLAGS)
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+RANLIB = @RANLIB@
+
+#
+# Flex and bison allow you to specify the prefixes of the global symbols
+# used by the generated parser. This allows programs to use lex/yacc
+# and link against libpcap. If you don't have flex or bison, get them.
+#
+LEX = @V_LEX@
+YACC = @V_YACC@
+
+# Explicitly define compilation rule since SunOS 4's make doesn't like gcc.
+# Also, gcc does not remove the .o before forking 'as', which can be a
+# problem if you don't own the file but can write to the directory.
+.c.o:
+ @rm -f $@
+ $(CC) $(FULL_CFLAGS) -c $(srcdir)/$*.c
+
+PSRC = pcap-@V_PCAP@.c @USB_SRC@ @BT_SRC@ @CAN_SRC@ @NETFILTER_SRC@ @CANUSB_SRC@
+FSRC = fad-@V_FINDALLDEVS@.c
+SSRC = @SSRC@
+CSRC = pcap.c inet.c gencode.c optimize.c nametoaddr.c etherent.c \
+ savefile.c sf-pcap.c sf-pcap-ng.c pcap-common.c \
+ bpf_image.c bpf_dump.c
+GENSRC = scanner.c grammar.c bpf_filter.c version.c
+LIBOBJS = @LIBOBJS@
+
+SRC = $(PSRC) $(FSRC) $(CSRC) $(SSRC) $(GENSRC)
+
+# We would like to say "OBJ = $(SRC:.c=.o)" but Ultrix's make cannot
+# hack the extra indirection
+OBJ = $(PSRC:.c=.o) $(FSRC:.c=.o) $(CSRC:.c=.o) $(SSRC:.c=.o) $(GENSRC:.c=.o) $(LIBOBJS)
+PUBHDR = \
+ pcap.h \
+ pcap-bpf.h \
+ pcap-namedb.h \
+ pcap/bpf.h \
+ pcap/bluetooth.h \
+ pcap/ipnet.h \
+ pcap/namedb.h \
+ pcap/pcap.h \
+ pcap/sll.h \
+ pcap/vlan.h \
+ pcap/usb.h
+
+HDR = $(PUBHDR) \
+ arcnet.h \
+ atmuni31.h \
+ ethertype.h \
+ gencode.h \
+ ieee80211.h \
+ llc.h \
+ nlpid.h \
+ pcap-common.h \
+ pcap-int.h \
+ pcap-stdinc.h \
+ ppp.h \
+ sf-pcap.h \
+ sf-pcap-ng.h \
+ sunatmpos.h
+
+TESTS = \
+ filtertest \
+ findalldevstest \
+ nonblocktest \
+ opentest \
+ selpolltest
+
+TESTS_SRC = \
+ tests/filtertest.c \
+ tests/findalldevstest.c \
+ tests/nonblocktest.c \
+ tests/opentest.c \
+ tests/reactivatetest.c \
+ tests/selpolltest.c
+
+GENHDR = \
+ scanner.h tokdefs.h version.h
+
+TAGFILES = \
+ $(SRC) $(HDR)
+
+CLEANFILES = $(OBJ) libpcap.* $(TESTS) \
+ $(PROG)-`cat $(srcdir)/VERSION`.tar.gz $(GENSRC) $(GENHDR) \
+ lex.yy.c pcap-config
+
+MAN1 = pcap-config.1
+
+MAN3PCAP_EXPAND = \
+ pcap.3pcap.in \
+ pcap_compile.3pcap.in \
+ pcap_datalink.3pcap.in \
+ pcap_dump_open.3pcap.in \
+ pcap_list_datalinks.3pcap.in \
+ pcap_list_tstamp_types.3pcap.in \
+ pcap_open_dead.3pcap.in \
+ pcap_open_offline.3pcap.in \
+ pcap_set_tstamp_type.3pcap.in
+
+MAN3PCAP_NOEXPAND = \
+ pcap_activate.3pcap \
+ pcap_breakloop.3pcap \
+ pcap_can_set_rfmon.3pcap \
+ pcap_close.3pcap \
+ pcap_create.3pcap \
+ pcap_datalink_name_to_val.3pcap \
+ pcap_datalink_val_to_name.3pcap \
+ pcap_dump.3pcap \
+ pcap_dump_close.3pcap \
+ pcap_dump_file.3pcap \
+ pcap_dump_flush.3pcap \
+ pcap_dump_ftell.3pcap \
+ pcap_file.3pcap \
+ pcap_fileno.3pcap \
+ pcap_findalldevs.3pcap \
+ pcap_freecode.3pcap \
+ pcap_get_selectable_fd.3pcap \
+ pcap_geterr.3pcap \
+ pcap_inject.3pcap \
+ pcap_is_swapped.3pcap \
+ pcap_lib_version.3pcap \
+ pcap_lookupdev.3pcap \
+ pcap_lookupnet.3pcap \
+ pcap_loop.3pcap \
+ pcap_major_version.3pcap \
+ pcap_next_ex.3pcap \
+ pcap_offline_filter.3pcap \
+ pcap_open_live.3pcap \
+ pcap_set_buffer_size.3pcap \
+ pcap_set_datalink.3pcap \
+ pcap_set_promisc.3pcap \
+ pcap_set_rfmon.3pcap \
+ pcap_set_snaplen.3pcap \
+ pcap_set_timeout.3pcap \
+ pcap_setdirection.3pcap \
+ pcap_setfilter.3pcap \
+ pcap_setnonblock.3pcap \
+ pcap_snapshot.3pcap \
+ pcap_stats.3pcap \
+ pcap_statustostr.3pcap \
+ pcap_strerror.3pcap \
+ pcap_tstamp_type_name_to_val.3pcap \
+ pcap_tstamp_type_val_to_name.3pcap
+
+MAN3PCAP = $(MAN3PCAP_NOEXPAND) $(MAN3PCAP_EXPAND:.in=)
+
+MANFILE = \
+ pcap-savefile.manfile.in
+
+MANMISC = \
+ pcap-filter.manmisc.in \
+ pcap-linktype.manmisc.in \
+ pcap-tstamp.manmisc.in
+
+EXTRA_DIST = \
+ $(TESTS_SRC) \
+ CHANGES \
+ ChmodBPF/ChmodBPF \
+ ChmodBPF/StartupParameters.plist \
+ CREDITS \
+ INSTALL.txt \
+ LICENSE \
+ Makefile.in \
+ README \
+ README.aix \
+ README.dag \
+ README.hpux \
+ README.linux \
+ README.macosx \
+ README.septel \
+ README.sita \
+ README.tru64 \
+ README.Win32 \
+ SUNOS4/nit_if.o.sparc \
+ SUNOS4/nit_if.o.sun3 \
+ SUNOS4/nit_if.o.sun4c.4.0.3c \
+ TODO \
+ VERSION \
+ aclocal.m4 \
+ bpf/net/bpf_filter.c \
+ chmod_bpf \
+ config.guess \
+ config.h.in \
+ config.sub \
+ configure \
+ configure.in \
+ dlpisubs.c \
+ dlpisubs.h \
+ fad-getad.c \
+ fad-gifc.c \
+ fad-glifc.c \
+ fad-null.c \
+ fad-sita.c \
+ fad-win32.c \
+ grammar.y \
+ install-sh \
+ lbl/os-aix4.h \
+ lbl/os-hpux11.h \
+ lbl/os-osf4.h \
+ lbl/os-osf5.h \
+ lbl/os-solaris2.h \
+ lbl/os-sunos4.h \
+ lbl/os-ultrix4.h \
+ missing/snprintf.c \
+ mkdep \
+ msdos/bin2c.c \
+ msdos/common.dj \
+ msdos/makefile \
+ msdos/makefile.dj \
+ msdos/makefile.wc \
+ msdos/ndis2.c \
+ msdos/ndis2.h \
+ msdos/ndis_0.asm \
+ msdos/pkt_rx0.asm \
+ msdos/pkt_rx1.s \
+ msdos/pktdrvr.c \
+ msdos/pktdrvr.h \
+ msdos/readme.dos \
+ org.tcpdump.chmod_bpf.plist \
+ packaging/pcap.spec.in \
+ pcap-bpf.c \
+ pcap-bt-linux.c \
+ pcap-bt-linux.h \
+ pcap-can-linux.c \
+ pcap-can-linux.h \
+ pcap-canusb-linux.c \
+ pcap-canusb-linux.h \
+ pcap-config.in \
+ pcap-dag.c \
+ pcap-dag.h \
+ pcap-dlpi.c \
+ pcap-dos.c \
+ pcap-dos.h \
+ pcap-enet.c \
+ pcap-int.h \
+ pcap-libdlpi.c \
+ pcap-linux.c \
+ pcap-namedb.h \
+ pcap-netfilter-linux.c \
+ pcap-netfilter-linux.h \
+ pcap-nit.c \
+ pcap-null.c \
+ pcap-pf.c \
+ pcap-septel.c \
+ pcap-septel.h \
+ pcap-sita.h \
+ pcap-sita.c \
+ pcap-sita.html \
+ pcap-snf.c \
+ pcap-snf.h \
+ pcap-snit.c \
+ pcap-snoop.c \
+ pcap-usb-linux.c \
+ pcap-usb-linux.h \
+ pcap-win32.c \
+ runlex.sh \
+ scanner.l \
+ Win32/Include/Gnuc.h \
+ Win32/Include/addrinfo.h \
+ Win32/Include/bittypes.h \
+ Win32/Include/cdecl_ext.h \
+ Win32/Include/inetprivate.h \
+ Win32/Include/ip6_misc.h \
+ Win32/Include/sockstorage.h \
+ Win32/Include/arpa/nameser.h \
+ Win32/Include/net/if.h \
+ Win32/Include/net/netdb.h \
+ Win32/Include/net/paths.h \
+ Win32/Prj/libpcap.dsp \
+ Win32/Prj/libpcap.dsw \
+ Win32/Src/ffs.c \
+ Win32/Src/gai_strerror.c \
+ Win32/Src/getaddrinfo.c \
+ Win32/Src/getnetbynm.c \
+ Win32/Src/getnetent.c \
+ Win32/Src/getopt.c \
+ Win32/Src/getservent.c \
+ Win32/Src/inet_aton.c \
+ Win32/Src/inet_net.c \
+ Win32/Src/inet_pton.c
+
+all: libpcap.a shared pcap-config
+
+libpcap.a: $(OBJ)
+ @rm -f $@
+ $(AR) rc $@ $(OBJ) $(ADDLARCHIVEOBJS)
+ $(RANLIB) $@
+
+shared: libpcap.$(DYEXT)
+
+libpcap.so: $(OBJ)
+ @rm -f $@
+ VER=`cat $(srcdir)/VERSION`; \
+ MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
+ @V_SHLIB_CMD@ @V_SHLIB_OPT@ @V_SONAME_OPT@$@.$$MAJOR_VER $(LDFLAGS) \
+ -o $@.$$VER $(OBJ) $(ADDLOBJS) $(LIBS)
+
+#
+# The following rule succeeds, but the result is untested.
+#
+# In Mac OS X, the libpcap dylib has the name "libpcap.A.dylib", with
+# its full path as the install_name, and with the compatibility and
+# current version both set to 1. The compatibility version is set to
+# 1 so that programs built with a newer version of the library will run
+# against older versions; multi-platform software probably will fail if
+# it uses APIs added in the newer version, but Mac OS X-specific software
+# will use weak linking and check at run time whether those APIs are
+# available.
+#
+# We also use "A" as the major version, and 1 as the compatibility version,
+# but set the current version to the value in VERSION, with any non-numeric
+# stuff stripped off (the compatibility and current version must be of the
+# form X[.Y[.Z]], with Y and Z possibly absent, and with all components
+# numeric).
+#
+libpcap.dylib: $(OBJ)
+ rm -f libpcap*.dylib
+ VER=`cat $(srcdir)/VERSION`; \
+ MAJOR_VER=A; \
+ COMPAT_VER=1; \
+ CURRENT_VER=`sed 's/[^0-9.].*$$//' $(srcdir)/VERSION`; \
+ $(CC) -dynamiclib -undefined error $(LDFLAGS) \
+ -o libpcap.$$VER.dylib $(OBJ) $(ADDLOBJS) $(LIBS) \
+ -install_name $(libdir)/libpcap.$$MAJOR_VER.dylib \
+ -compatibility_version $$COMPAT_VER \
+ -current_version $$CURRENT_VER
+
+#
+# The HP-UX linker manual says that the convention for a versioned library
+# is libXXX.{number}, not libXXX.sl.{number}. That appears to be the case
+# on at least one HP-UX 11.00 system; libXXX.sl is a symlink to
+# libXXX.{number}.
+#
+# The manual also says "library-level versioning" (think "sonames") was
+# added in HP-UX 10.0.
+#
+# XXX - this assumes we're using the HP linker, rather than the GNU
+# linker, even with GCC.
+#
+libpcap.sl: $(OBJ)
+ @MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
+ rm -f libpcap.$$MAJOR_VER
+ MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
+ ld -b $(LDFLAGS) -o libpcap.$$MAJOR_VER +h libpcap.$$MAJOR_VER \
+ $(OBJ) $(ADDLOBJS) $(LIBS)
+
+#
+# AIX is different from everybody else. A shared library is an archive
+# library with one or more shared-object components. We still build a
+# normal static archive library on AIX, for the benefit of the traditional
+# scheme of building libpcap and tcpdump in subdirectories of the
+# same directory, with tcpdump statically linked with the libpcap
+# in question, but we also build a shared library as "libpcap.shareda"
+# and install *it*, rather than the static library, as "libpcap.a".
+#
+libpcap.shareda: $(OBJ)
+ @rm -f $@ shr.o
+ $(CC) @V_SHLIB_OPT@ -o shr.o $(OBJ) $(ADDLOBJS) $(LDFLAGS) $(LIBS)
+ $(AR) rc $@ shr.o
+
+#
+# For platforms that don't support shared libraries (or on which we
+# don't support shared libraries).
+#
+libpcap.none:
+
+scanner.c: $(srcdir)/scanner.l
+ @rm -f $@
+ $(srcdir)/runlex.sh $(LEX) -o$@ $<
+
+scanner.o: scanner.c tokdefs.h
+ $(CC) $(FULL_CFLAGS) -c scanner.c
+
+pcap.o: version.h
+
+tokdefs.h: grammar.c
+grammar.c: $(srcdir)/grammar.y
+ @rm -f grammar.c tokdefs.h
+ $(YACC) -d $<
+ mv y.tab.c grammar.c
+ mv y.tab.h tokdefs.h
+
+grammar.o: grammar.c
+ @rm -f $@
+ $(CC) $(FULL_CFLAGS) -Dyylval=pcap_lval -c grammar.c
+
+version.o: version.c
+ $(CC) $(FULL_CFLAGS) -c version.c
+
+snprintf.o: $(srcdir)/missing/snprintf.c
+ $(CC) $(FULL_CFLAGS) -o $@ -c $(srcdir)/missing/snprintf.c
+
+version.c: $(srcdir)/VERSION
+ @rm -f $@
+ if grep GIT ${srcdir}/VERSION >/dev/null; then \
+ read ver <${srcdir}/VERSION; \
+ echo $$ver | tr -d '\012'; \
+ date +_%Y_%m_%d; \
+ else \
+ cat ${srcdir}/VERSION; \
+ fi | sed -e 's/.*/char pcap_version[] = "&";/' > $@
+
+#
+# NOTE: this really is supposed to be static; importing a string
+# from a shared library does not work very well on many
+# versions of UNIX (Solaris, Linux, and the BSDs, for example),
+# so we make the version string static and return it from
+# a function, which does work.
+#
+version.h: $(srcdir)/VERSION
+ @rm -f $@
+ if grep GIT ${srcdir}/VERSION >/dev/null; then \
+ read ver <${srcdir}/VERSION; \
+ echo $$ver | tr -d '\012'; \
+ date +_%Y_%m_%d; \
+ else \
+ cat ${srcdir}/VERSION; \
+ fi | sed -e 's/.*/static const char pcap_version_string[] = "libpcap version &";/' > $@
+
+bpf_filter.c: $(srcdir)/bpf/net/bpf_filter.c
+ rm -f bpf_filter.c
+ ln -s $(srcdir)/bpf/net/bpf_filter.c bpf_filter.c
+
+bpf_filter.o: bpf_filter.c
+ $(CC) $(FULL_CFLAGS) -c bpf_filter.c
+
+#
+# Generate the pcap-config script.
+#
+# Some Makes, e.g. AIX Make and Solaris Make, can't handle "--file=$@.tmp:$<";
+# for example, the Solaris 9 make man page says
+#
+# Because make assigns $< and $* as it would for implicit rules
+# (according to the suffixes list and the directory contents),
+# they may be unreliable when used within explicit target entries.
+#
+# and this is an explicit target entry.
+#
+# Therefore, instead of using $<, we explicitly put in $(srcdir)/pcap-config.in.
+#
+pcap-config: $(srcdir)/pcap-config.in ./config.status
+ @rm -f $@ $@.tmp
+ ./config.status --file=$@.tmp:$(srcdir)/pcap-config.in
+ mv $@.tmp $@
+ chmod a+x $@
+
+#
+# Test programs - not built by default, and not installed.
+#
+tests: $(TESTS)
+
+filtertest: tests/filtertest.c libpcap.a
+ $(CC) $(FULL_CFLAGS) -I. -L. -o filtertest $(srcdir)/tests/filtertest.c libpcap.a $(LIBS)
+
+findalldevstest: tests/findalldevstest.c libpcap.a
+ $(CC) $(FULL_CFLAGS) -I. -L. -o findalldevstest $(srcdir)/tests/findalldevstest.c libpcap.a $(LIBS)
+
+nonblocktest: tests/nonblocktest.c libpcap.a
+ $(CC) $(FULL_CFLAGS) -I. -L. -o nonblocktest $(srcdir)/tests/nonblocktest.c libpcap.a $(LIBS)
+
+opentest: tests/opentest.c libpcap.a
+ $(CC) $(FULL_CFLAGS) -I. -L. -o opentest $(srcdir)/tests/opentest.c libpcap.a $(LIBS)
+
+selpolltest: tests/selpolltest.c libpcap.a
+ $(CC) $(FULL_CFLAGS) -I. -L. -o selpolltest $(srcdir)/tests/selpolltest.c libpcap.a $(LIBS)
+
+install: install-shared install-archive pcap-config
+ [ -d $(DESTDIR)$(libdir) ] || \
+ (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
+ [ -d $(DESTDIR)$(includedir) ] || \
+ (mkdir -p $(DESTDIR)$(includedir); chmod 755 $(DESTDIR)$(includedir))
+ [ -d $(DESTDIR)$(includedir)/pcap ] || \
+ (mkdir -p $(DESTDIR)$(includedir)/pcap; chmod 755 $(DESTDIR)$(includedir)/pcap)
+ [ -d $(DESTDIR)$(mandir)/man1 ] || \
+ (mkdir -p $(DESTDIR)$(mandir)/man1; chmod 755 $(DESTDIR)$(mandir)/man1)
+ [ -d $(DESTDIR)$(mandir)/man3 ] || \
+ (mkdir -p $(DESTDIR)$(mandir)/man3; chmod 755 $(DESTDIR)$(mandir)/man3)
+ [ -d $(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@ ] || \
+ (mkdir -p $(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@; chmod 755 $(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@)
+ [ -d $(DESTDIR)$(mandir)/man@MAN_MISC_INFO@ ] || \
+ (mkdir -p $(DESTDIR)$(mandir)/man@MAN_MISC_INFO@; chmod 755 $(DESTDIR)$(mandir)/man@MAN_MISC_INFO@)
+ for i in $(PUBHDR); do \
+ $(INSTALL_DATA) $(srcdir)/$$i \
+ $(DESTDIR)$(includedir)/$$i; done
+ [ -d $(DESTDIR)$(bindir) ] || \
+ (mkdir -p $(DESTDIR)$(bindir); chmod 755 $(DESTDIR)$(bindir))
+ $(INSTALL_PROGRAM) pcap-config $(DESTDIR)$(bindir)/pcap-config
+ for i in $(MAN1); do \
+ $(INSTALL_DATA) $(srcdir)/$$i \
+ $(DESTDIR)$(mandir)/man1/$$i; done
+ for i in $(MAN3PCAP_NOEXPAND); do \
+ $(INSTALL_DATA) $(srcdir)/$$i \
+ $(DESTDIR)$(mandir)/man3/$$i; done
+ for i in $(MAN3PCAP_EXPAND:.in=); do \
+ $(INSTALL_DATA) $$i \
+ $(DESTDIR)$(mandir)/man3/$$i; done
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_datalink_val_to_description.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_datalink_val_to_name.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_datalink_val_to_description.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_dump_fopen.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_dump_open.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_dump_fopen.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_freealldevs.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_findalldevs.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_freealldevs.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_perror.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_geterr.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_perror.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_sendpacket.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_inject.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_sendpacket.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_free_datalinks.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_list_datalinks.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_free_datalinks.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_free_tstamp_types.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_list_tstamp_types.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_free_tstamp_types.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_dispatch.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_loop.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_dispatch.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_minor_version.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_major_version.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_minor_version.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_next.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_next_ex.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_next.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_fopen_offline.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_open_offline.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_fopen_offline.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_getnonblock.3pcap
+ ln $(DESTDIR)$(mandir)/man3/pcap_setnonblock.3pcap \
+ $(DESTDIR)$(mandir)/man3/pcap_getnonblock.3pcap
+ for i in $(MANFILE); do \
+ $(INSTALL_DATA) `echo $$i | sed 's/.manfile.in/.manfile/'` \
+ $(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@/`echo $$i | sed 's/.manfile.in/.@MAN_FILE_FORMATS@/'`; done
+ for i in $(MANMISC); do \
+ $(INSTALL_DATA) `echo $$i | sed 's/.manmisc.in/.manmisc/'` \
+ $(DESTDIR)$(mandir)/man@MAN_MISC_INFO@/`echo $$i | sed 's/.manmisc.in/.@MAN_MISC_INFO@/'`; done
+
+install-shared: install-shared-$(DYEXT)
+install-shared-so: libpcap.so
+ [ -d $(DESTDIR)$(libdir) ] || \
+ (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
+ VER=`cat $(srcdir)/VERSION`; \
+ MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
+ $(INSTALL_PROGRAM) libpcap.so.$$VER $(DESTDIR)$(libdir)/libpcap.so.$$VER; \
+ ln -sf libpcap.so.$$VER $(DESTDIR)$(libdir)/libpcap.so.$$MAJOR_VER; \
+ ln -sf libpcap.so.$$MAJOR_VER $(DESTDIR)$(libdir)/libpcap.so
+install-shared-dylib: libpcap.dylib
+ [ -d $(DESTDIR)$(libdir) ] || \
+ (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
+ VER=`cat $(srcdir)/VERSION`; \
+ MAJOR_VER=A; \
+ $(INSTALL_PROGRAM) libpcap.$$VER.dylib $(DESTDIR)$(libdir)/libpcap.$$VER.dylib; \
+ ln -sf libpcap.$$VER.dylib $(DESTDIR)$(libdir)/libpcap.$$MAJOR_VER.dylib; \
+ ln -sf libpcap.$$MAJOR_VER.dylib $(DESTDIR)$(libdir)/libpcap.dylib
+install-shared-sl: libpcap.sl
+ [ -d $(DESTDIR)$(libdir) ] || \
+ (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
+ MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
+ $(INSTALL_PROGRAM) libpcap.$$MAJOR_VER $(DESTDIR)$(libdir)
+ ln -sf libpcap.$$MAJOR_VER $(DESTDIR)$(libdir)/libpcap.sl
+install-shared-shareda: libpcap.shareda
+ #
+ # AIX shared libraries are weird. They're archive libraries
+ # with one or more shared object components.
+ #
+ [ -d $(DESTDIR)$(libdir) ] || \
+ (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
+ $(INSTALL_PROGRAM) libpcap.shareda $(DESTDIR)$(libdir)/libpcap.a
+install-shared-none:
+
+install-archive: install-archive-$(DYEXT)
+install-archive-so install-archive-dylib install-archive-sl install-archive-none: libpcap.a
+ #
+ # Most platforms have separate suffixes for shared and
+ # archive libraries, so we install both.
+ #
+ [ -d $(DESTDIR)$(libdir) ] || \
+ (mkdir -p $(DESTDIR)$(libdir); chmod 755 $(DESTDIR)$(libdir))
+ $(INSTALL_DATA) libpcap.a $(DESTDIR)$(libdir)/libpcap.a
+ $(RANLIB) $(DESTDIR)$(libdir)/libpcap.a
+install-archive-shareda:
+ #
+ # AIX, however, doesn't, so we don't install the archive
+ # library on AIX.
+ #
+
+uninstall: uninstall-shared
+ rm -f $(DESTDIR)$(libdir)/libpcap.a
+ for i in $(PUBHDR); do \
+ rm -f $(DESTDIR)$(includedir)/$$i; done
+ -rmdir $(DESTDIR)$(includedir)/pcap
+ rm -f $(DESTDIR)/$(bindir)/pcap-config
+ for i in $(MAN1); do \
+ rm -f $(DESTDIR)$(mandir)/man1/$$i; done
+ for i in $(MAN3PCAP); do \
+ rm -f $(DESTDIR)$(mandir)/man3/$$i; done
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_datalink_val_to_description.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_dump_fopen.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_freealldevs.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_perror.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_sendpacket.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_free_datalinks.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_free_tstamp_types.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_dispatch.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_minor_version.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_next.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_fopen_offline.3pcap
+ rm -f $(DESTDIR)$(mandir)/man3/pcap_getnonblock.3pcap
+ for i in $(MANFILE); do \
+ rm -f $(DESTDIR)$(mandir)/man@MAN_FILE_FORMATS@/`echo $$i | sed 's/.manfile.in/.@MAN_FILE_FORMATS@/'`; done
+ for i in $(MANMISC); do \
+ rm -f $(DESTDIR)$(mandir)/man@MAN_MISC_INFO@/`echo $$i | sed 's/.manmisc.in/.@MAN_MISC_INFO@/'`; done
+
+uninstall-shared: uninstall-shared-$(DYEXT)
+uninstall-shared-so:
+ VER=`cat $(srcdir)/VERSION`; \
+ MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
+ rm -f $(DESTDIR)$(libdir)/libpcap.so.$$VER; \
+ rm -f $(DESTDIR)$(libdir)/libpcap.so.$$MAJOR_VER; \
+ rm -f $(DESTDIR)$(libdir)/libpcap.so
+uninstall-shared-dylib:
+ VER=`cat $(srcdir)/VERSION`; \
+ MAJOR_VER=A; \
+ rm -f $(DESTDIR)$(libdir)/libpcap.$$VER.dylib; \
+ rm -f $(DESTDIR)$(libdir)/libpcap.$$MAJOR_VER.dylib; \
+ rm -f $(DESTDIR)$(libdir)/libpcap.dylib
+uninstall-shared-sl:
+ MAJOR_VER=`sed 's/\([0-9][0-9]*\)\..*/\1/' $(srcdir)/VERSION`; \
+ rm -f $(DESTDIR)$(libdir)/libpcap.$$MAJOR_VER; \
+ rm -f $(DESTDIR)$(libdir)/libpcap.sl
+uninstall-shared-shareda:
+ rm -f $(DESTDIR)$(libdir)/libpcap.a
+uninstall-shared-none:
+
+clean:
+ rm -f $(CLEANFILES)
+
+distclean: clean
+ rm -f Makefile config.cache config.log config.status \
+ config.h gnuc.h net os-proto.h bpf_filter.c pcap-config \
+ stamp-h stamp-h.in
+ rm -f $(MAN3PCAP_EXPAND:.in=) $(MANFILE:.in=) $(MANMISC:.in=)
+ rm -rf autom4te.cache
+
+tags: $(TAGFILES)
+ ctags -wtd $(TAGFILES)
+
+packaging/pcap.spec: packaging/pcap.spec.in VERSION
+ RPMVERSION=`cat VERSION | sed s/-.*//g`; \
+ sed -e s/@VERSION@/$$RPMVERSION/ -e s/@NAME@/libpcap-`cat VERSION`/ $< > $@
+
+releasetar:
+ @cwd=`pwd` ; dir=`basename $$cwd` ; name=$(PROG)-`cat VERSION` ; \
+ mkdir $$name; \
+ tar cf - $(CSRC) $(HDR) $(MAN1) $(MAN3PCAP_EXPAND) \
+ $(MAN3PCAP_NOEXPAND) $(MANFILE) $(MANMISC) $(EXTRA_DIST) | \
+ (cd $$name; tar xf -); \
+ tar -c -z -f $$name.tar.gz $$name; \
+ rm -rf $$name
+
+depend: $(GENSRC) $(GENHDR) bpf_filter.c
+ ./mkdep -c $(CC) $(DEFS) $(INCLS) $(SRC)
+
+Makefile: Makefile.in config.status
+ ./config.status
+ @echo your Makefile was out of date, now run $(MAKE) again
+ exit 1
diff --git a/libpcap-1.3.0/README b/libpcap-1.3.0/README
new file mode 100644
index 0000000..a206474
--- /dev/null
+++ b/libpcap-1.3.0/README
@@ -0,0 +1,105 @@
+@(#) $Header: /tcpdump/master/libpcap/README,v 1.34 2008-12-14 19:44:14 guy Exp $ (LBL)
+
+LIBPCAP 1.x.y
+
+www.tcpdump.org
+
+Please send inquiries/comments/reports to:
+ tcpdump-workers@lists.tcpdump.org
+
+Anonymous Git is available via:
+ git clone git://bpf.tcpdump.org/libpcap
+
+Version 1.x.y of LIBPCAP can be retrieved with the CVS tag "libpcap_1_{x}rel{y}":
+ cvs -d :pserver:tcpdump@cvs.tcpdump.org:/tcpdump/master checkout -r libpcap_1_{x}rel{y} libpcap
+
+Please submit patches against the master copy to the libpcap project on
+sourceforge.net.
+
+formerly from Lawrence Berkeley National Laboratory
+ Network Research Group <libpcap@ee.lbl.gov>
+ ftp://ftp.ee.lbl.gov/libpcap.tar.Z (0.4)
+
+This directory contains source code for libpcap, a system-independent
+interface for user-level packet capture. libpcap provides a portable
+framework for low-level network monitoring. Applications include
+network statistics collection, security monitoring, network debugging,
+etc. Since almost every system vendor provides a different interface
+for packet capture, and since we've developed several tools that
+require this functionality, we've created this system-independent API
+to ease in porting and to alleviate the need for several
+system-dependent packet capture modules in each application.
+
+For some platforms there are README.{system} files that discuss issues
+with the OS's interface for packet capture on those platforms, such as
+how to enable support for that interface in the OS, if it's not built in
+by default.
+
+The libpcap interface supports a filtering mechanism based on the
+architecture in the BSD packet filter. BPF is described in the 1993
+Winter Usenix paper ``The BSD Packet Filter: A New Architecture for
+User-level Packet Capture''. A compressed PostScript version can be
+found at
+
+ ftp://ftp.ee.lbl.gov/papers/bpf-usenix93.ps.Z
+
+or
+
+ http://www.tcpdump.org/papers/bpf-usenix93.ps.Z
+
+and a gzipped version can be found at
+
+ http://www.tcpdump.org/papers/bpf-usenix93.ps.gz
+
+A PDF version can be found at
+
+ http://www.tcpdump.org/papers/bpf-usenix93.pdf
+
+Although most packet capture interfaces support in-kernel filtering,
+libpcap utilizes in-kernel filtering only for the BPF interface.
+On systems that don't have BPF, all packets are read into user-space
+and the BPF filters are evaluated in the libpcap library, incurring
+added overhead (especially, for selective filters). Ideally, libpcap
+would translate BPF filters into a filter program that is compatible
+with the underlying kernel subsystem, but this is not yet implemented.
+
+BPF is standard in 4.4BSD, BSD/OS, NetBSD, FreeBSD, OpenBSD, DragonFly
+BSD, and Mac OS X; an older, modified and undocumented version is
+standard in AIX. {DEC OSF/1, Digital UNIX, Tru64 UNIX} uses the
+packetfilter interface but has been extended to accept BPF filters
+(which libpcap utilizes). Also, you can add BPF filter support to
+Ultrix using the kernel source and/or object patches available in:
+
+ http://www.tcpdump.org/other/bpfext42.tar.Z
+
+Linux, in the 2.2 kernel and later kernels, has a "Socket Filter"
+mechanism that accepts BPF filters; see the README.linux file for
+information on configuring that option.
+
+Note to Linux distributions and *BSD systems that include libpcap:
+
+There's now a rule to make a shared library, which should work on Linux
+and *BSD, among other platforms.
+
+It sets the soname of the library to "libpcap.so.1"; this is what it
+should be, *NOT* libpcap.so.1.x or libpcap.so.1.x.y or something such as
+that.
+
+We've been maintaining binary compatibility between libpcap releases for
+quite a while; there's no reason to tie a binary linked with libpcap to
+a particular release of libpcap.
+
+Problems, bugs, questions, desirable enhancements, etc. should be sent
+to the address "tcpdump-workers@lists.tcpdump.org". Bugs, support
+requests, and feature requests may also be submitted on the SourceForge
+site for libpcap at
+
+ http://sourceforge.net/projects/libpcap/
+
+Source code contributions, etc. should be sent to the email address
+submitted as patches on the SourceForge site for libpcap.
+
+Current versions can be found at www.tcpdump.org, or the SourceForge
+site for libpcap.
+
+ - The TCPdump team
diff --git a/libpcap-1.3.0/README.Win32 b/libpcap-1.3.0/README.Win32
new file mode 100644
index 0000000..503836e
--- /dev/null
+++ b/libpcap-1.3.0/README.Win32
@@ -0,0 +1,46 @@
+Under Win32, libpcap is integrated in the WinPcap packet capture system.
+WinPcap provides a framework that allows libpcap to capture the packets
+under Windows 95, Windows 98, Windows ME, Windows NT 4, Windows 2000
+and Windows XP.
+WinPcap binaries and source code can be found at http://winpcap.polito.it:
+they include also a developer's pack with all the necessary to compile
+libpcap-based applications under Windows.
+
+How to compile libpcap with Visual Studio
+-----------------------------------------
+
+In order to compile libpcap you will need:
+
+- version 6 (or higher) of Microsoft Visual Studio
+- The November 2001 (or later) edition of Microsoft Platform
+Software Development Kit (SDK), that contains some necessary includes
+for IPv6 support. You can download it from http://www.microsoft.com/sdk
+- the latest WinPcap sources from http://winpcap.polito.it/install
+
+The WinPcap source code already contains a recent (usually the latest
+stable) version of libpcap. If you need to compile a different one,
+simply download it from www.tcpdump.org and copy the sources in the
+winpcap\wpcap\libpcap folder of the WinPcap distribution. If you want to
+compile a libpcap source retrieved from the tcpdump.org Git, you will
+have to create the scanner and the grammar by hand (with lex and yacc)
+or with the cygnus makefile, since The Visual Studio project is not able
+to build them.
+
+Open the project file winpcap\wpcap\prj\wpcap.dsw with Visual Studio and
+build wpcap.dll. wpcap.lib, the library file to link with the applications,
+will be generated in winpcap\wpcap\lib\. wpcap.dll will be generated in
+winpcap\wpcap\prj\release or winpcap\wpcap\prj\debug depending on the type
+of binary that is being created.
+
+How to compile libpcap with Cygnus
+----------------------------------
+
+To build wpcap.dll, cd to the directory WPCAP/PRJ of the WinPcap source code
+distribution and type "make". libwpcap.a, the library file to link with the
+applications, will be generated in winpcap\wpcap\lib\. wpcap.dll will be
+generated in winpcap\wpcap\prj.
+
+Remember, you CANNOT use the MSVC-generated .lib files with gcc, use
+libwpcap.a instead.
+
+"make install" installs wpcap.dll in the Windows system folder.
diff --git a/libpcap-1.3.0/README.aix b/libpcap-1.3.0/README.aix
new file mode 100644
index 0000000..b32fa58
--- /dev/null
+++ b/libpcap-1.3.0/README.aix
@@ -0,0 +1,81 @@
+Using BPF:
+
+(1) AIX 4.x's version of BPF is undocumented and somewhat unstandard; the
+ current BPF support code includes changes that should work around
+ that; it appears to compile and work on at least one AIX 4.3.3
+ machine.
+
+ Note that the BPF driver and the "/dev/bpf" devices might not exist
+ on your machine; AIX's tcpdump loads the driver and creates the
+ devices if they don't already exist. Our libpcap should do the
+ same, and the configure script should detect that it's on an AIX
+ system and choose BPF even if the devices aren't there.
+
+(2) If libpcap doesn't compile on your machine when configured to use
+ BPF, or if the workarounds fail to make it work correctly, you
+ should send to tcpdump-workers@lists.tcpdump.org a detailed bug
+ report (if the compile fails, send us the compile error messages;
+ if it compiles but fails to work correctly, send us as detailed as
+ possible a description of the symptoms, including indications of the
+ network link-layer type being wrong or time stamps being wrong).
+
+ If you fix the problems yourself, please submit a patch to
+
+ http://sourceforge.net/projects/libpcap/
+
+ so we can incorporate them into the next release.
+
+ If you don't fix the problems yourself, you can, as a workaround,
+ make libpcap use DLPI instead of BPF.
+
+ This can be done by specifying the flag:
+
+ --with-pcap=dlpi
+
+ to the "configure" script for libpcap.
+
+If you use DLPI:
+
+(1) It is a good idea to have the latest version of the DLPI driver on
+ your system, since certain versions may be buggy and cause your AIX
+ system to crash. DLPI is included in the fileset bos.rte.tty. I
+ found that the DLPI driver that came with AIX 4.3.2 was buggy, and
+ had to upgrade to bos.rte.tty 4.3.2.4:
+
+ lslpp -l bos.rte.tty
+
+ bos.rte.tty 4.3.2.4 COMMITTED Base TTY Support and Commands
+
+ Updates for AIX filesets can be obtained from:
+ ftp://service.software.ibm.com/aix/fixes/
+
+ These updates can be installed with the smit program.
+
+(2) After compiling libpcap, you need to make sure that the DLPI driver
+ is loaded. Type:
+
+ strload -q -d dlpi
+
+ If the result is:
+
+ dlpi: yes
+
+ then the DLPI driver is loaded correctly.
+
+ If it is:
+
+ dlpi: no
+
+ Then you need to type:
+
+ strload -f /etc/dlpi.conf
+
+ Check again with strload -q -d dlpi that the dlpi driver is loaded.
+
+ Alternatively, you can uncomment the lines for DLPI in
+ /etc/pse.conf and reboot the machine; this way DLPI will always
+ be loaded when you boot your system.
+
+(3) There appears to be a problem in the DLPI code in some versions of
+ AIX, causing a warning about DL_PROMISC_MULTI failing; this might
+ be responsible for DLPI not being able to capture outgoing packets.
diff --git a/libpcap-1.3.0/README.dag b/libpcap-1.3.0/README.dag
new file mode 100644
index 0000000..acf97ed
--- /dev/null
+++ b/libpcap-1.3.0/README.dag
@@ -0,0 +1,114 @@
+
+The following instructions apply if you have a Linux or FreeBSD platform and
+want libpcap to support the DAG range of passive network monitoring cards from
+Endace (http://www.endace.com, see below for further contact details).
+
+1) Install and build the DAG software distribution by following the
+instructions supplied with that package. Current Endace customers can download
+the DAG software distibution from https://www.endace.com
+
+2) Configure libcap. To allow the 'configure' script to locate the DAG
+software distribution use the '--with-dag' option:
+
+ ./configure --with-dag=DIR
+
+Where DIR is the root of the DAG software distribution, for example
+/var/src/dag. If the DAG software is correctly detected 'configure' will
+report:
+
+ checking whether we have DAG API... yes
+
+If 'configure' reports that there is no DAG API, the directory may have been
+incorrectly specified or the DAG software was not built before configuring
+libpcap.
+
+See also the libpcap INSTALL.txt file for further libpcap configuration
+options.
+
+Building libpcap at this stage will include support for both the native packet
+capture stream (linux or bpf) and for capturing from DAG cards. To build
+libpcap with only DAG support specify the capture type as 'dag' when
+configuring libpcap:
+
+ ./configure --with-dag=DIR --with-pcap=dag
+
+Applications built with libpcap configured in this way will only detect DAG
+cards and will not capture from the native OS packet stream.
+
+----------------------------------------------------------------------
+
+Libpcap when built for DAG cards against dag-2.5.1 or later releases:
+
+Timeouts are supported. pcap_dispatch() will return after to_ms milliseconds
+regardless of how many packets are received. If to_ms is zero pcap_dispatch()
+will block waiting for data indefinitely.
+
+pcap_dispatch() will block on and process a minimum of 64kB of data (before
+filtering) for efficiency. This can introduce high latencies on quiet
+interfaces unless a timeout value is set. The timeout expiring will override
+the 64kB minimum causing pcap_dispatch() to process any available data and
+return.
+
+pcap_setnonblock is supported. When nonblock is set, pcap_dispatch() will
+check once for available data, process any data available up to count, then
+return immediately.
+
+pcap_findalldevs() is supported, e.g. dag0, dag1...
+
+Some DAG cards can provide more than one 'stream' of received data.
+This can be data from different physical ports, or separated by filtering
+or load balancing mechanisms. Receive streams have even numbers, e.g.
+dag0:0, dag0:2 etc. Specifying transmit streams for capture is not supported.
+
+pcap_setfilter() is supported, BPF programs run in userspace.
+
+pcap_setdirection() is not supported. Only received traffic is captured.
+DAG cards normally do not have IP or link layer addresses assigned as
+they are used to passively monitor links.
+
+pcap_breakloop() is supported.
+
+pcap_datalink() and pcap_list_datalinks() are supported. The DAG card does
+not attempt to set the correct datalink type automatically where more than
+one type is possible.
+
+pcap_stats() is supported. ps_drop is the number of packets dropped due to
+RX stream buffer overflow, this count is before filters are applied (it will
+include packets that would have been dropped by the filter). The RX stream
+buffer size is user configurable outside libpcap, typically 16-512MB.
+
+pcap_get_selectable_fd() is not supported, as DAG cards do not support
+poll/select methods.
+
+pcap_inject() and pcap_sendpacket() are not supported.
+
+Some DAG cards now support capturing to multiple virtual interfaces, called
+streams. Capture streams have even numbers. These are available via libpcap
+as separate interfaces, e.g. dag0:0, dag0:2, dag0:4 etc. dag0:0 is the same
+as dag0. These are visible via pcap_findalldevs().
+
+libpcap now does NOT set the card's hardware snaplen (slen). This must now be
+set using the appropriate DAG coniguration program, e.g. dagthree, dagfour,
+dagsix, dagconfig. This is because the snaplen is currently shared between
+all of the streams. In future this may change if per-stream slen is
+implemented.
+
+DAG cards by default capture entire packets including the L2
+CRC/FCS. If the card is not configured to discard the CRC/FCS, this
+can confuse applications that use libpcap if they're not prepared for
+packets to have an FCS. Libpcap now reads the environment variable
+ERF_FCS_BITS to determine how many bits of CRC/FCS to strip from the
+end of the captured frame. This defaults to 32 for use with
+Ethernet. If the card is configured to strip the CRC/FCS, then set
+ERF_FCS_BITS=0. If used with a HDLC/PoS/PPP/Frame Relay link with 16
+bit CRC/FCS, then set ERF_FCS_BITS=16.
+
+----------------------------------------------------------------------
+
+Please submit bug reports via <support@endace.com>.
+
+Please also visit our Web site at:
+
+ http://www.endace.com/
+
+For more information about Endace DAG cards contact <sales@endace.com>.
diff --git a/libpcap-1.3.0/README.hpux b/libpcap-1.3.0/README.hpux
new file mode 100644
index 0000000..88c27f8
--- /dev/null
+++ b/libpcap-1.3.0/README.hpux
@@ -0,0 +1,254 @@
+For HP-UX 11i (11.11) and later, there are no known issues with
+promiscuous mode under HP-UX. If you are using a earlier version of
+HP-UX and cannot upgrade, please continue reading.
+
+HP-UX patches to fix packet capture problems
+
+Note that packet-capture programs such as tcpdump may, on HP-UX, not be
+able to see packets sent from the machine on which they're running.
+Some articles on groups.google.com discussing this are:
+
+ http://groups.google.com/groups?selm=82ld3v%2480i%241%40mamenchi.zrz.TU-Berlin.DE
+
+which says:
+
+ Newsgroups: comp.sys.hp.hpux
+ Subject: Re: Did someone made tcpdump working on 10.20 ?
+ Date: 12/08/1999
+ From: Lutz Jaenicke <jaenicke@emserv1.ee.TU-Berlin.DE>
+
+ In article <82ks5i$5vc$1@news1.dti.ne.jp>, mtsat <mtsat@iris.dti.ne.jp>
+ wrote:
+ >Hello,
+ >
+ >I downloaded and compiled tcpdump3.4 a couple of week ago. I tried to use
+ >it, but I can only see incoming data, never outgoing.
+ >Someone (raj) explained me that a patch was missing, and that this patch
+ >must me "patched" (poked) in order to see outbound data in promiscuous mode.
+ >Many things to do .... So the question is : did someone has already this
+ >"ready to use" PHNE_**** patch ?
+
+ Two things:
+ 1. You do need a late "LAN products cumulative patch" (e.g. PHNE_18173
+ for s700/10.20).
+ 2. You must use
+echo 'lanc_outbound_promisc_flag/W1' | /usr/bin/adb -w /stand/vmunix /dev/kmem
+ You can insert this e.g. into /sbin/init.d/lan
+
+ Best regards,
+ Lutz
+
+and
+
+ http://groups.google.com/groups?selm=88cf4t%24p03%241%40web1.cup.hp.com
+
+which says:
+
+ Newsgroups: comp.sys.hp.hpux
+ Subject: Re: tcpdump only shows incoming packets
+ Date: 02/15/2000
+ From: Rick Jones <foo@bar.baz.invalid>
+
+ Harald Skotnes <harald@cc.uit.no> wrote:
+ > I am running HPUX 11.0 on a C200 hanging on a 100Mb switch. I have
+ > compiled libpcap-0.4 an tcpdump-3.4 and it seems to work. But at a
+ > closer look I only get to see the incoming packets not the
+ > outgoing. I have tried tcpflow-0.12 which also uses libpcap and the
+ > same thing happens. Could someone please give me a hint on how to
+ > get this right?
+
+ Search/Read the archives ?-)
+
+ What you are seeing is expected, un-patched, behaviour for an HP-UX
+ system. On 11.00, you need to install the latest lancommon/DLPI
+ patches, and then the latest driver patch for the interface(s) in use.
+ At that point, a miracle happens and you should start seeing outbound
+ traffic.
+
+[That article also mentions the patch that appears below.]
+
+and
+
+ http://groups.google.com/groups?selm=38AA973E.96BE7DF7%40cc.uit.no
+
+which says:
+
+ Newsgroups: comp.sys.hp.hpux
+ Subject: Re: tcpdump only shows incoming packets
+ Date: 02/16/2000
+ From: Harald Skotnes <harald@cc.uit.no>
+
+ Rick Jones wrote:
+
+ ...
+
+ > What you are seeing is expected, un-patched, behaviour for an HP-UX
+ > system. On 11.00, you need to install the latest lancommon/DLPI
+ > patches, and then the latest driver patch for the interface(s) in
+ > use. At that point, a miracle happens and you should start seeing
+ > outbound traffic.
+
+ Thanks a lot. I have this problem on several machines running HPUX
+ 10.20 and 11.00. The machines where patched up before y2k so did not
+ know what to think. Anyway I have now installed PHNE_19766,
+ PHNE_19826, PHNE_20008, PHNE_20735 on the C200 and now I can see the
+ outbound traffic too. Thanks again.
+
+(although those patches may not be the ones to install - there may be
+later patches).
+
+And another message to tcpdump-workers@tcpdump.org, from Rick Jones:
+
+ Date: Mon, 29 Apr 2002 15:59:55 -0700
+ From: Rick Jones
+ To: tcpdump-workers@tcpdump.org
+ Subject: Re: [tcpdump-workers] I Can't Capture the Outbound Traffic
+
+ ...
+
+ http://itrc.hp.com/ would be one place to start in a search for the most
+ up-to-date patches for DLPI and the lan driver(s) used on your system (I
+ cannot guess because 9000/800 is too generic - one hs to use the "model"
+ command these days and/or an ioscan command (see manpage) to guess what
+ the drivers (btlan[3456], gelan, etc) might be involved in addition to
+ DLPI.
+
+ Another option is to upgrade to 11i as outbound promiscuous mode support
+ is there in the base OS, no patches required.
+
+Another posting:
+
+ http://groups.google.com/groups?selm=7d6gvn%24b3%241%40ocean.cup.hp.com
+
+indicates that you need to install the optional STREAMS product to do
+captures on HP-UX 9.x:
+
+ Newsgroups: comp.sys.hp.hpux
+ Subject: Re: tcpdump HP/UX 9.x
+ Date: 03/22/1999
+ From: Rick Jones <foo@bar.baz>
+
+ Dave Barr (barr@cis.ohio-state.edu) wrote:
+ : Has anyone ported tcpdump (or something similar) to HP/UX 9.x?
+
+ I'm reasonably confident that any port of tcpdump to 9.X would require
+ the (then optional) STREAMS product. This would bring DLPI, which is
+ what one uses to access interfaces in promiscuous mode.
+
+ I'm not sure that HP even sells the 9.X STREAMS product any longer,
+ since HP-UX 9.X is off the pricelist (well, maybe 9.10 for the old 68K
+ devices).
+
+ Your best bet is to be up on 10.20 or better if that is at all
+ possible. If your hardware is supported by it, I'd go with HP-UX 11.
+ If you want to see the system's own outbound traffic, you'll never get
+ that functionality on 9.X, but it might happen at some point for 10.20
+ and 11.X.
+
+ rick jones
+
+(as per other messages cited here, the ability to see the system's own
+outbound traffic did happen).
+
+Rick Jones reports that HP-UX 11i needs no patches for outbound
+promiscuous mode support.
+
+An additional note, from Jost Martin, for HP-UX 10.20:
+
+ Q: How do I get ethereral on HPUX to capture the _outgoing_ packets
+ of an interface
+ A: You need to get PHNE_20892,PHNE_20725 and PHCO_10947 (or
+ newer, this is as of 4.4.00) and its dependencies. Then you can
+ enable the feature as descibed below:
+
+ Patch Name: PHNE_20892
+ Patch Description: s700 10.20 PCI 100Base-T cumulative patch
+ To trace the outbound packets, please do the following
+ to turn on a global promiscuous switch before running
+ the promiscuous applications like snoop or tcpdump:
+
+ adb -w /stand/vmunix /dev/mem
+ lanc_outbound_promisc_flag/W 1
+ (adb will echo the result showing that the flag has
+ been changed)
+ $quit
+ (Thanks for this part to HP-support, Ratingen)
+
+ The attached hack does this and some security-related stuff
+ (thanks to hildeb@www.stahl.bau.tu-bs.de (Ralf Hildebrandt) who
+ posted the security-part some time ago)
+
+ <<hack_ip_stack>>
+
+ (Don't switch IP-forwarding off, if you need it !)
+ Install the hack as /sbin/init.d/hacl_ip_stack (adjust
+ permissions !) and make a sequencing-symlink
+ /sbin/rc2.d/S350hack_ip_stack pointing to this script.
+ Now all this is done on every reboot.
+
+According to Rick Jones, the global promiscuous switch also has to be
+turned on for HP-UX 11.00, but not for 11i - and, in fact, the switch
+doesn't even exist on 11i.
+
+Here's the "hack_ip_stack" script:
+
+-----------------------------------Cut Here-------------------------------------
+#!/sbin/sh
+#
+# nettune: hack kernel parms for safety
+
+OKAY=0
+ERROR=-1
+
+# /usr/contrib/bin fuer nettune auf Pfad
+PATH=/sbin:/usr/sbin:/usr/bin:/usr/contrib/bin
+export PATH
+
+
+##########
+# main #
+##########
+
+case $1 in
+ start_msg)
+ print "Tune IP-Stack for security"
+ exit $OKAY
+ ;;
+
+ stop_msg)
+ print "This action is not applicable"
+ exit $OKAY
+ ;;
+
+ stop)
+ exit $OKAY
+ ;;
+
+ start)
+ ;; # fall through
+
+ *)
+ print "USAGE: $0 {start_msg | stop_msg | start | stop}" >&2
+ exit $ERROR
+ ;;
+ esac
+
+###########
+# start #
+###########
+
+#
+# tcp-Sequence-Numbers nicht mehr inkrementieren sondern random
+# Syn-Flood-Protection an
+# ip_forwarding aus
+# Source-Routing aus
+# Ausgehende Packets an ethereal/tcpdump etc.
+
+/usr/contrib/bin/nettune -s tcp_random_seq 2 || exit $ERROR
+/usr/contrib/bin/nettune -s hp_syn_protect 1 || exit $ERROR
+/usr/contrib/bin/nettune -s ip_forwarding 0 || exit $ERROR
+echo 'ip_block_source_routed/W1' | /usr/bin/adb -w /stand/vmunix /dev/kmem || exit $ERROR
+echo 'lanc_outbound_promisc_flag/W 1' | adb -w /stand/vmunix /dev/mem || exit $ERROR
+
+exit $OKAY
+-----------------------------------Cut Here-------------------------------------
diff --git a/libpcap-1.3.0/README.linux b/libpcap-1.3.0/README.linux
new file mode 100644
index 0000000..f92cd22
--- /dev/null
+++ b/libpcap-1.3.0/README.linux
@@ -0,0 +1,108 @@
+In order for libpcap to be able to capture packets on a Linux system,
+the "packet" protocol must be supported by your kernel. If it is not,
+you may get error messages such as
+
+ modprobe: can't locate module net-pf-17
+
+in "/var/adm/messages", or may get messages such as
+
+ socket: Address family not supported by protocol
+
+from applications using libpcap.
+
+You must configure the kernel with the CONFIG_PACKET option for this
+protocol; the following note is from the Linux "Configure.help" file for
+the 2.0[.x] kernel:
+
+ Packet socket
+ CONFIG_PACKET
+ The Packet protocol is used by applications which communicate
+ directly with network devices without an intermediate network
+ protocol implemented in the kernel, e.g. tcpdump. If you want them
+ to work, choose Y.
+
+ This driver is also available as a module called af_packet.o ( =
+ code which can be inserted in and removed from the running kernel
+ whenever you want). If you want to compile it as a module, say M
+ here and read Documentation/modules.txt; if you use modprobe or
+ kmod, you may also want to add "alias net-pf-17 af_packet" to
+ /etc/modules.conf.
+
+and the note for the 2.2[.x] kernel says:
+
+ Packet socket
+ CONFIG_PACKET
+ The Packet protocol is used by applications which communicate
+ directly with network devices without an intermediate network
+ protocol implemented in the kernel, e.g. tcpdump. If you want them
+ to work, choose Y. This driver is also available as a module called
+ af_packet.o ( = code which can be inserted in and removed from the
+ running kernel whenever you want). If you want to compile it as a
+ module, say M here and read Documentation/modules.txt. You will
+ need to add 'alias net-pf-17 af_packet' to your /etc/conf.modules
+ file for the module version to function automatically. If unsure,
+ say Y.
+
+In addition, there is an option that, in 2.2 and later kernels, will
+allow packet capture filters specified to programs such as tcpdump to be
+executed in the kernel, so that packets that don't pass the filter won't
+be copied from the kernel to the program, rather than having all packets
+copied to the program and libpcap doing the filtering in user mode.
+
+Copying packets from the kernel to the program consumes a significant
+amount of CPU, so filtering in the kernel can reduce the overhead of
+capturing packets if a filter has been specified that discards a
+significant number of packets. (If no filter is specified, it makes no
+difference whether the filtering isn't performed in the kernel or isn't
+performed in user mode. :-))
+
+The option for this is the CONFIG_FILTER option; the "Configure.help"
+file says:
+
+ Socket filtering
+ CONFIG_FILTER
+ The Linux Socket Filter is derived from the Berkeley Packet Filter.
+ If you say Y here, user-space programs can attach a filter to any
+ socket and thereby tell the kernel that it should allow or disallow
+ certain types of data to get through the socket. Linux Socket
+ Filtering works on all socket types except TCP for now. See the text
+ file linux/Documentation/networking/filter.txt for more information.
+ If unsure, say N.
+
+Note that, by default, libpcap will, if libnl is present, build with it;
+it uses libnl to support monitor mode on mac80211 devices. There is a
+configuration option to disable building with libnl, but, if that option
+is chosen, the monitor-mode APIs (as used by tcpdump's "-I" flag, and as
+will probably be used by other applications in the future) won't work
+properly on mac80211 devices.
+
+Linux's run-time linker allows shared libraries to be linked with other
+shared libraries, which means that if an older version of a shared
+library doesn't require routines from some other shared library, and a
+later version of the shared library does require those routines, the
+later version of the shared library can be linked with that other shared
+library and, if it's otherwise binary-compatible with the older version,
+can replace that older version without breaking applications built with
+the older version, and without breaking configure scripts or the build
+procedure for applications whose configure script doesn't use the
+pcap-config script if they build with the shared library. (The build
+procedure for applications whose configure scripts use the pcap-config
+script if present will not break even if they build with the static
+library.)
+
+Statistics:
+Statistics reported by pcap are platform specific. The statistics
+reported by pcap_stats on Linux are as follows:
+
+2.2.x
+=====
+ps_recv Number of packets that were accepted by the pcap filter
+ps_drop Always 0, this statistic is not gatherd on this platform
+
+2.4.x
+=====
+ps_recv Number of packets that were accepted by the pcap filter
+ps_drop Number of packets that had passed filtering but were not
+ passed on to pcap due to things like buffer shortage, etc.
+ This is useful because these are packets you are interested in
+ but won't be reported by, for example, tcpdump output.
diff --git a/libpcap-1.3.0/README.macosx b/libpcap-1.3.0/README.macosx
new file mode 100644
index 0000000..3dc9211
--- /dev/null
+++ b/libpcap-1.3.0/README.macosx
@@ -0,0 +1,74 @@
+As with other systems using BPF, Mac OS X allows users with read access
+to the BPF devices to capture packets with libpcap and allows users with
+write access to the BPF devices to send packets with libpcap.
+
+On some systems that use BPF, the BPF devices live on the root file
+system, and the permissions and/or ownership on those devices can be
+changed to give users other than root permission to read or write those
+devices.
+
+On newer versions of FreeBSD, the BPF devices live on devfs, and devfs
+can be configured to set the permissions and/or ownership of those
+devices to give users other than root permission to read or write those
+devices.
+
+On Mac OS X, the BPF devices live on devfs, but the OS X version of
+devfs is based on an older (non-default) FreeBSD devfs, and that version
+of devfs cannot be configured to set the permissions and/or ownership of
+those devices.
+
+Therefore, we supply:
+
+ a "startup item" for older versions of Mac OS X;
+
+ a launchd daemon for Tiger and later versions of Mac OS X;
+
+Both of them will change the ownership of the BPF devices so that the
+"admin" group owns them, and will change the permission of the BPF
+devices to rw-rw----, so that all users in the "admin" group - i.e., all
+users with "Allow user to administer this computer" turned on - have
+both read and write access to them.
+
+The startup item is in the ChmodBPF directory in the source tree. A
+/Library/StartupItems directory should be created if it doesn't already
+exist, and the ChmodBPF directory should be copied to the
+/Library/StartupItems directory (copy the entire directory, so that
+there's a /Library/StartupItems/ChmodBPF directory, containing all the
+files in the source tree's ChmodBPF directory; don't copy the individual
+items in that directory to /Library/StartupItems). The ChmodBPF
+directory, and all files under it, must be owned by root. Installing
+the files won't immediately cause the startup item to be executed; it
+will be executed on the next reboot. To change the permissions before
+the reboot, run
+
+ sudo SystemStarter start ChmodBPF
+
+The launchd daemon is the chmod_bpf script, plus the
+org.tcpdump.chmod_bpf.plist launchd plist file. chmod_bpf should be
+installed in /usr/local/bin/chmod_bpf, and org.tcpdump.chmod_bpf.plist
+should be installed in /Library/LaunchDaemons. chmod_bpf, and
+org.tcpdump.chmod_bpf.plist, must be owned by root. Installing the
+script and plist file won't immediately cause the script to be executed;
+it will be executed on the next reboot. To change the permissions
+before the reboot, run
+
+ sudo /usr/local/bin/chmod_bpf
+
+or
+
+ sudo launchctl load /Library/LaunchDaemons/org.tcpdump.chmod_bpf.plist
+
+If you want to give a particular user permission to access the BPF
+devices, rather than giving all administrative users permission to
+access them, you can have the ChmodBPF/ChmodBPF script change the
+ownership of /dev/bpf* without changing the permissions. If you want to
+give a particular user permission to read and write the BPF devices and
+give the administrative users permission to read but not write the BPF
+devices, you can have the script change the owner to that user, the
+group to "admin", and the permissions to rw-r-----. Other possibilities
+are left as an exercise for the reader.
+
+(NOTE: due to a bug in Snow Leopard, if you change the permissions not
+to grant write permission to everybody who should be allowed to capture
+traffic, non-root users who cannot open the BPF devices for writing will
+not be able to capture outgoing packets.)
diff --git a/libpcap-1.3.0/README.septel b/libpcap-1.3.0/README.septel
new file mode 100644
index 0000000..fbc88df
--- /dev/null
+++ b/libpcap-1.3.0/README.septel
@@ -0,0 +1,50 @@
+The following instructions apply if you have a Linux platform and want
+libpcap to support the Septel range of passive network monitoring cards
+from Intel (http://www.intel.com)
+
+1) Install and build the Septel software distribution by following the
+instructions supplied with that package.
+
+2) Configure libcap. To allow the 'configure' script to locate the Septel
+software distribution use the '--with-septel' option:
+
+ ./configure --with-septel=DIR
+
+where DIR is the root of the Septel software distribution, for example
+/var/src/septel.
+
+By default (if you write only ./configure --with-septel) it takes
+./../septel as argument for DIR.
+
+If the Septel software is correctly detected 'configure' will
+report:
+
+ checking whether we have Septel API... yes
+
+If 'configure' reports that there is no Septel API, the directory may have been
+incorrectly specified or the Septel software was not built before configuring
+libpcap.
+
+See also the libpcap INSTALL.txt file for further libpcap configuration
+options.
+
+Building libpcap at this stage will include support for both the native
+packet capture stream and for capturing from Septel cards. To build
+libpcap with only Septel support specify the capture type as 'septel'
+when configuring libpcap:
+
+ ./configure --with-septel=DIR --with-pcap=septel
+
+Applications built with libpcap configured in this way will only detect Septel
+cards and will not capture from the native OS packet stream.
+
+Note: As mentioned in pcap-septel.c we should first edit the system.txt
+file to change the user part example (UPE) module id to 0xdd instead of
+0x2d for technical reason. So this change in system.txt is crutial and
+things will go wrong if it's not done. System.txt along with config.txt
+are configuration files that are edited by the user before running the
+gctload program that uses these files for initialising modules and
+configuring parameters.
+
+----------------------------------------------------------------------
+for more information please contact me : gil_hoyek@hotmail.com
diff --git a/libpcap-1.3.0/README.sita b/libpcap-1.3.0/README.sita
new file mode 100644
index 0000000..ee7a426
--- /dev/null
+++ b/libpcap-1.3.0/README.sita
@@ -0,0 +1,64 @@
+The following instructions apply if you have a Linux platform and want
+libpcap to support the 'ACN' WAN/LAN router product from from SITA
+(http://www.sita.aero)
+
+This might also work on non-Linux Unix-compatible platforms, but that
+has not been tested.
+
+See also the libpcap INSTALL.txt file for further libpcap configuration
+options.
+
+These additions/extensions have been made to PCAP to allow it to
+capture packets from a SITA ACN device (and potentially others).
+
+To enable its support you need to ensure that the distribution has
+a correct configure.in file; that can be created if neccessay by
+using the normal autoconf procedure of:
+
+aclocal
+autoconf
+autoheader
+automake
+
+Then run configure with the 'sita' option:
+
+./configure --with-sita
+
+Applications built with libpcap configured in this way will only detect SITA
+ACN interfaces and will not capture from the native OS packet stream.
+
+The SITA extension provides a remote datascope operation for capturing
+both WAN and LAN protocols. It effectively splits the operation of
+PCAP into two halves. The top layer performs the majority of the
+work, but interfaces via a TCP session to remote agents that
+provide the lower layer functionality of actual sniffing and
+filtering. More detailed information regarding the functions and
+inter-device protocol and naming conventions are described in detail
+in 'pcap-sita.html'.
+
+pcap_findalldevs() reads the local system's /etc/hosts file looking
+for host names that match the format of IOP type devices. ie. aaa_I_x_y
+and then queries each associated IP address for a list of its WAN and
+LAN devices. The local system the aggregates the lists obtained from
+each IOP, sorts it, and provides it (to Wireshark et.al) as the
+list of monitorable interfaces.
+
+Once a valid interface has been selected, pcap_open() is called
+which opens a TCP session (to a well known port) on the target IOP
+and tells it to start monitoring.
+
+All captured packets are then forwarded across that TCP session
+back to the local 'top layer' for forwarding to the actual
+sniffing program (wireshark...)
+
+Note that the DLT_SITA link-layer type includes a proprietary header
+that is documented as part of the SITA dissector of Wireshark and is
+also described in 'pcap-sita.html' for posterity sake.
+
+That header provides:
+- Packet direction (in/out) (1 octet)
+- Link layer hardware signal status (1 octet)
+- Transmit/Receive error status (2 octets)
+- Encapsulated WAN protocol ID (1 octet)
+
+
diff --git a/libpcap-1.3.0/README.tru64 b/libpcap-1.3.0/README.tru64
new file mode 100644
index 0000000..7fe1ef0
--- /dev/null
+++ b/libpcap-1.3.0/README.tru64
@@ -0,0 +1,49 @@
+The following instructions are applicable to Tru64 UNIX
+(formerly Digital UNIX (formerly DEC OSF/1)) version 4.0, and
+probably to later versions as well; at least some options apply to
+Digital UNIX 3.2 - perhaps all do.
+
+In order to use kernel packet filtering on this system, you have
+to configure it in such a way:
+
+Kernel configuration
+--------------------
+
+The packet filtering kernel option must be enabled at kernel
+installation. If it was not the case, you can rebuild the kernel with
+"doconfig -c" after adding the following line in the kernel
+configuration file (/sys/conf/<HOSTNAME>):
+
+ option PACKETFILTER
+
+or use "doconfig" without any arguments to add the packet filter driver
+option via the kernel option menu (see the system administration
+documentation for information on how to do this).
+
+Device configuration
+--------------------
+
+Devices used for packet filtering must be created thanks to
+the following command (executed in the /dev directory):
+
+ ./MAKEDEV pfilt
+
+Interface configuration
+-----------------------
+
+In order to capture all packets on a network, you may want to allow
+applications to put the interface on that network into "local copy"
+mode, so that tcpdump can see packets sent by the host on which it's
+running as well as packets received by that host, and to put the
+interface into "promiscuous" mode, so that tcpdump can see packets on
+the network segment not sent to the host on which it's running, by using
+the pfconfig(1) command:
+
+ pfconfig +c +p <network_device>
+
+or allow application to put any interface into "local copy" or
+"promiscuous" mode by using the command:
+
+ pfconfig +c +p -a
+
+Note: all instructions given require root privileges.
diff --git a/libpcap-1.3.0/SUNOS4/nit_if.o.sparc b/libpcap-1.3.0/SUNOS4/nit_if.o.sparc
new file mode 100644
index 0000000..d05073e
--- /dev/null
+++ b/libpcap-1.3.0/SUNOS4/nit_if.o.sparc
Binary files differ
diff --git a/libpcap-1.3.0/SUNOS4/nit_if.o.sun3 b/libpcap-1.3.0/SUNOS4/nit_if.o.sun3
new file mode 100644
index 0000000..c393fc6
--- /dev/null
+++ b/libpcap-1.3.0/SUNOS4/nit_if.o.sun3
Binary files differ
diff --git a/libpcap-1.3.0/SUNOS4/nit_if.o.sun4c.4.0.3c b/libpcap-1.3.0/SUNOS4/nit_if.o.sun4c.4.0.3c
new file mode 100644
index 0000000..ef01039
--- /dev/null
+++ b/libpcap-1.3.0/SUNOS4/nit_if.o.sun4c.4.0.3c
Binary files differ
diff --git a/libpcap-1.3.0/TODO b/libpcap-1.3.0/TODO
new file mode 100644
index 0000000..73325e1
--- /dev/null
+++ b/libpcap-1.3.0/TODO
@@ -0,0 +1,35 @@
+ TODO list for libpcap
+=======================
+
+Important stuff (to be done before the next release)
+---------------
+
+General
+
+- configure should not be in Git. Most open source projects have an
+ autogen.sh script to run autoconf etc. after checkout. I think we
+ should stick to the standard.
+
+- The source files should be better documented. There is no official
+ design guideline for what is done where. There should be a common coding
+ style (okay, you can guess that by looking at the code) and a guide for
+ what needs to be documented.
+
+Less urgent items
+-----------------
+
+- Better documentation and cleanup of the interface. I am seeing a few
+ problems at the first glance which needs fixing:
+ + pcap_lookupnet makes little to no sense with protocols != IPv4
+ + not very well suited for interactive programs (think ethereal). There
+ should be a way for the application to get a file descriptor which it
+ has to monitor and a callback in pcap which has to be called on
+ activity (XXX - "pcap_fileno()" handles the first part, although
+ "select()" and "poll()" don't work on BPF devices on most BSDs, and
+ you can call "pcap_dispatch()" as the dispatch routine after putting
+ the descriptor into non-blocking mode)
+ + too many functions. There are a lot of functions for everything which
+ violates the KISS principle. Why do we need pcap_strerror, pcap_perror
+ and pcap_geterr?
+ + the manpage has a brief description of each function but where is the
+ big picture? Seems like you need to buy UNP for that...
diff --git a/libpcap-1.3.0/VERSION b/libpcap-1.3.0/VERSION
new file mode 100644
index 0000000..f0bb29e
--- /dev/null
+++ b/libpcap-1.3.0/VERSION
@@ -0,0 +1 @@
+1.3.0
diff --git a/libpcap-1.3.0/Win32/Include/Gnuc.h b/libpcap-1.3.0/Win32/Include/Gnuc.h
new file mode 100644
index 0000000..0bf4b73
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/Gnuc.h
@@ -0,0 +1,46 @@
+/* @(#) $Header: /tcpdump/master/libpcap/Win32/Include/Gnuc.h,v 1.1 2002-08-01 08:33:05 risso Exp $ (LBL) */
+
+/* Define __P() macro, if necessary */
+
+#ifndef __P
+#if __STDC__
+#define __P(protos) protos
+#else
+#define __P(protos) ()
+#endif
+#endif
+
+/* inline foo */
+#ifndef __cplusplus
+#ifdef __GNUC__
+#define inline __inline
+#else
+#define inline
+#endif
+#endif
+
+/*
+ * Handle new and old "dead" routine prototypes
+ *
+ * For example:
+ *
+ * __dead void foo(void) __attribute__((volatile));
+ *
+ */
+#ifdef __GNUC__
+#ifndef __dead
+#define __dead volatile
+#endif
+#if __GNUC__ < 2 || (__GNUC__ == 2 && __GNUC_MINOR__ < 5)
+#ifndef __attribute__
+#define __attribute__(args)
+#endif
+#endif
+#else
+#ifndef __dead
+#define __dead
+#endif
+#ifndef __attribute__
+#define __attribute__(args)
+#endif
+#endif
diff --git a/libpcap-1.3.0/Win32/Include/addrinfo.h b/libpcap-1.3.0/Win32/Include/addrinfo.h
new file mode 100644
index 0000000..8cb2e65
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/addrinfo.h
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 1995, 1996, 1997, 1998, and 1999 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* $Id: addrinfo.h,v 1.1 2002-08-01 08:33:05 risso Exp $ */
+
+#ifndef HAVE_ADDRINFO
+
+/*
+ * Error return codes from getaddrinfo()
+ */
+#define EAI_ADDRFAMILY 1 /* address family for hostname not supported */
+#define EAI_AGAIN 2 /* temporary failure in name resolution */
+#define EAI_BADFLAGS 3 /* invalid value for ai_flags */
+#define EAI_FAIL 4 /* non-recoverable failure in name resolution */
+#define EAI_FAMILY 5 /* ai_family not supported */
+#define EAI_MEMORY 6 /* memory allocation failure */
+#define EAI_NODATA 7 /* no address associated with hostname */
+#define EAI_NONAME 8 /* hostname nor servname provided, or not known */
+#define EAI_SERVICE 9 /* servname not supported for ai_socktype */
+#define EAI_SOCKTYPE 10 /* ai_socktype not supported */
+#define EAI_SYSTEM 11 /* system error returned in errno */
+#define EAI_BADHINTS 12
+#define EAI_PROTOCOL 13
+#define EAI_MAX 14
+
+/* internal error */
+#define NETDB_INTERNAL -1 /* see errno */
+
+/*
+ * Flag values for getaddrinfo()
+ */
+#define AI_PASSIVE 0x00000001 /* get address to use bind() */
+#define AI_CANONNAME 0x00000002 /* fill ai_canonname */
+#define AI_NUMERICHOST 0x00000004 /* prevent name resolution */
+/* valid flags for addrinfo */
+#define AI_MASK (AI_PASSIVE | AI_CANONNAME | AI_NUMERICHOST)
+
+#define AI_ALL 0x00000100 /* IPv6 and IPv4-mapped (with AI_V4MAPPED) */
+#define AI_V4MAPPED_CFG 0x00000200 /* accept IPv4-mapped if kernel supports */
+#define AI_ADDRCONFIG 0x00000400 /* only if any address is assigned */
+#define AI_V4MAPPED 0x00000800 /* accept IPv4-mapped IPv6 address */
+/* special recommended flags for getipnodebyname */
+#define AI_DEFAULT (AI_V4MAPPED_CFG | AI_ADDRCONFIG)
+
+struct addrinfo {
+ int ai_flags; /* AI_PASSIVE, AI_CANONNAME */
+ int ai_family; /* PF_xxx */
+ int ai_socktype; /* SOCK_xxx */
+ int ai_protocol; /* 0 or IPPROTO_xxx for IPv4 and IPv6 */
+ size_t ai_addrlen; /* length of ai_addr */
+ char *ai_canonname; /* canonical name for hostname */
+ struct sockaddr *ai_addr; /* binary address */
+ struct addrinfo *ai_next; /* next structure in linked list */
+};
+
+extern void freeaddrinfo (struct addrinfo *);
+extern void freehostent (struct hostent *);
+extern char *gai_strerror (int);
+extern int getaddrinfo (const char *, const char *,
+ const struct addrinfo *, struct addrinfo **);
+extern int getnameinfo (const struct sockaddr *, size_t, char *,
+ size_t, char *, size_t, int);
+extern struct hostent *getipnodebyaddr (const void *, size_t, int, int *);
+extern struct hostent *getipnodebyname (const char *, int, int, int *);
+extern int inet_pton (int, const char *, void *);
+extern const char *inet_ntop (int, const void *, char *, size_t);
+#else
+
+#ifndef EAI_BADHINTS
+#define EAI_BADHINTS 12
+#endif
+
+#ifndef EAI_PROTOCOL
+#define EAI_PROTOCOL 13
+#endif
+
+#ifndef EAI_MAX
+#define EAI_MAX 14
+#endif
+
+#ifndef NETDB_INTERNAL
+#define NETDB_INTERNAL -1 /* see errno */
+#endif
+
+#ifndef AI_MASK
+/* valid flags for addrinfo */
+#define AI_MASK (AI_PASSIVE | AI_CANONNAME | AI_NUMERICHOST)
+#endif
+
+#endif /* HAVE_ADDRINFO */
+
+/*
+ * Constants for getnameinfo()
+ */
+#ifndef NI_MAXHOST
+#define NI_MAXHOST 1025
+#endif
+#ifndef NI_MAXSERV
+#define NI_MAXSERV 32
+#endif
+
+/*
+ * Flag values for getnameinfo()
+ */
+#ifndef NI_NOFQDN
+#define NI_NOFQDN 0x00000001
+#endif
+#ifndef NI_NUMERICHOST
+#define NI_NUMERICHOST 0x00000002
+#endif
+#ifndef NI_NAMEREQD
+#define NI_NAMEREQD 0x00000004
+#endif
+#ifndef NI_NUMERICSERV
+#define NI_NUMERICSERV 0x00000008
+#endif
+#ifndef NI_DGRAM
+#define NI_DGRAM 0x00000010
+#endif
+
diff --git a/libpcap-1.3.0/Win32/Include/arpa/nameser.h b/libpcap-1.3.0/Win32/Include/arpa/nameser.h
new file mode 100644
index 0000000..18f185c
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/arpa/nameser.h
@@ -0,0 +1,349 @@
+/*
+ * ++Copyright++ 1983, 1989, 1993
+ * -
+ * Copyright (c) 1983, 1989, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ * -
+ * Portions Copyright (c) 1993 by Digital Equipment Corporation.
+ *
+ * Permission to use, copy, modify, and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies, and that
+ * the name of Digital Equipment Corporation not be used in advertising or
+ * publicity pertaining to distribution of the document or software without
+ * specific, written prior permission.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL DIGITAL EQUIPMENT
+ * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+ * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ * -
+ * --Copyright--
+ */
+
+/*
+ * @(#)nameser.h 8.1 (Berkeley) 6/2/93
+ * nameser.h,v 1.2 1995/05/06 14:23:54 hjl Exp
+ */
+
+#ifndef _NAMESER_H_
+#define _NAMESER_H_
+
+#ifndef WIN32
+#include <sys/param.h>
+#if (!defined(BSD)) || (BSD < 199306)
+# include <sys/bitypes.h>
+#else
+# include <sys/types.h>
+#endif
+#include <sys/cdefs.h>
+#else
+#include <pcap-stdinc.h>
+#define __LITTLE_ENDIAN 1
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#endif
+
+/*
+ * revision information. this is the release date in YYYYMMDD format.
+ * it can change every day so the right thing to do with it is use it
+ * in preprocessor commands such as "#if (__BIND > 19931104)". do not
+ * compare for equality; rather, use it to determine whether your resolver
+ * is new enough to contain a certain feature.
+ */
+
+#define __BIND 19940417 /* interface version stamp */
+
+/*
+ * Define constants based on rfc883
+ */
+#define PACKETSZ 512 /* maximum packet size */
+#define MAXDNAME 256 /* maximum domain name */
+#define MAXCDNAME 255 /* maximum compressed domain name */
+#define MAXLABEL 63 /* maximum length of domain label */
+#define HFIXEDSZ 12 /* #/bytes of fixed data in header */
+#define QFIXEDSZ 4 /* #/bytes of fixed data in query */
+#define RRFIXEDSZ 10 /* #/bytes of fixed data in r record */
+#define INT32SZ 4 /* for systems without 32-bit ints */
+#define INT16SZ 2 /* for systems without 16-bit ints */
+#define INADDRSZ 4 /* for sizeof(struct inaddr) != 4 */
+
+/*
+ * Internet nameserver port number
+ */
+#define NAMESERVER_PORT 53
+
+/*
+ * Currently defined opcodes
+ */
+#define QUERY 0x0 /* standard query */
+#define IQUERY 0x1 /* inverse query */
+#define STATUS 0x2 /* nameserver status query */
+/*#define xxx 0x3 *//* 0x3 reserved */
+#define NS_NOTIFY_OP 0x4 /* notify secondary of SOA change */
+#ifdef ALLOW_UPDATES
+ /* non standard - supports ALLOW_UPDATES stuff from Mike Schwartz */
+# define UPDATEA 0x9 /* add resource record */
+# define UPDATED 0xa /* delete a specific resource record */
+# define UPDATEDA 0xb /* delete all named resource record */
+# define UPDATEM 0xc /* modify a specific resource record */
+# define UPDATEMA 0xd /* modify all named resource record */
+# define ZONEINIT 0xe /* initial zone transfer */
+# define ZONEREF 0xf /* incremental zone referesh */
+#endif
+
+/*
+ * Currently defined response codes
+ */
+#ifdef HAVE_ADDRINFO
+#define NOERROR 0 /* no error */
+#endif /* HAVE_ADDRINFO */
+#define FORMERR 1 /* format error */
+#define SERVFAIL 2 /* server failure */
+#define NXDOMAIN 3 /* non existent domain */
+#define NOTIMP 4 /* not implemented */
+#define REFUSED 5 /* query refused */
+#ifdef ALLOW_UPDATES
+ /* non standard */
+# define NOCHANGE 0xf /* update failed to change db */
+#endif
+
+/*
+ * Type values for resources and queries
+ */
+#define T_A 1 /* host address */
+#define T_NS 2 /* authoritative server */
+#define T_MD 3 /* mail destination */
+#define T_MF 4 /* mail forwarder */
+#define T_CNAME 5 /* canonical name */
+#define T_SOA 6 /* start of authority zone */
+#define T_MB 7 /* mailbox domain name */
+#define T_MG 8 /* mail group member */
+#define T_MR 9 /* mail rename name */
+#define T_NULL 10 /* null resource record */
+#define T_WKS 11 /* well known service */
+#define T_PTR 12 /* domain name pointer */
+#define T_HINFO 13 /* host information */
+#define T_MINFO 14 /* mailbox information */
+#define T_MX 15 /* mail routing information */
+#define T_TXT 16 /* text strings */
+#define T_RP 17 /* responsible person */
+#define T_AFSDB 18 /* AFS cell database */
+#define T_X25 19 /* X_25 calling address */
+#define T_ISDN 20 /* ISDN calling address */
+#define T_RT 21 /* router */
+#define T_NSAP 22 /* NSAP address */
+#define T_NSAP_PTR 23 /* reverse NSAP lookup (deprecated) */
+#define T_SIG 24 /* security signature */
+#define T_KEY 25 /* security key */
+#define T_PX 26 /* X.400 mail mapping */
+#define T_GPOS 27 /* geographical position (withdrawn) */
+#define T_AAAA 28 /* IP6 Address */
+#define T_LOC 29 /* Location Information */
+ /* non standard */
+#define T_UINFO 100 /* user (finger) information */
+#define T_UID 101 /* user ID */
+#define T_GID 102 /* group ID */
+#define T_UNSPEC 103 /* Unspecified format (binary data) */
+ /* Query type values which do not appear in resource records */
+#define T_AXFR 252 /* transfer zone of authority */
+#define T_MAILB 253 /* transfer mailbox records */
+#define T_MAILA 254 /* transfer mail agent records */
+#define T_ANY 255 /* wildcard match */
+
+/*
+ * Values for class field
+ */
+
+#define C_IN 1 /* the arpa internet */
+#define C_CHAOS 3 /* for chaos net (MIT) */
+#define C_HS 4 /* for Hesiod name server (MIT) (XXX) */
+ /* Query class values which do not appear in resource records */
+#define C_ANY 255 /* wildcard match */
+
+/*
+ * Status return codes for T_UNSPEC conversion routines
+ */
+#define CONV_SUCCESS 0
+#define CONV_OVERFLOW (-1)
+#define CONV_BADFMT (-2)
+#define CONV_BADCKSUM (-3)
+#define CONV_BADBUFLEN (-4)
+
+#ifndef __BYTE_ORDER
+#if (BSD >= 199103)
+# include <machine/endian.h>
+#else
+#ifdef linux
+# include <endian.h>
+#else
+#define __LITTLE_ENDIAN 1234 /* least-significant byte first (vax, pc) */
+#define __BIG_ENDIAN 4321 /* most-significant byte first (IBM, net) */
+#define __PDP_ENDIAN 3412 /* LSB first in word, MSW first in long (pdp)*/
+
+#if defined(vax) || defined(ns32000) || defined(sun386) || defined(i386) || \
+ defined(MIPSEL) || defined(_MIPSEL) || defined(BIT_ZERO_ON_RIGHT) || \
+ defined(__alpha__) || defined(__alpha)
+#define __BYTE_ORDER __LITTLE_ENDIAN
+#endif
+
+#if defined(sel) || defined(pyr) || defined(mc68000) || defined(sparc) || \
+ defined(is68k) || defined(tahoe) || defined(ibm032) || defined(ibm370) || \
+ defined(MIPSEB) || defined(_MIPSEB) || defined(_IBMR2) || defined(DGUX) ||\
+ defined(apollo) || defined(__convex__) || defined(_CRAY) || \
+ defined(__hppa) || defined(__hp9000) || \
+ defined(__hp9000s300) || defined(__hp9000s700) || \
+ defined (BIT_ZERO_ON_LEFT) || defined(m68k)
+#define __BYTE_ORDER __BIG_ENDIAN
+#endif
+#endif /* linux */
+#endif /* BSD */
+#endif /* __BYTE_ORDER */
+
+#if !defined(__BYTE_ORDER) || \
+ (__BYTE_ORDER != __BIG_ENDIAN && __BYTE_ORDER != __LITTLE_ENDIAN && \
+ __BYTE_ORDER != __PDP_ENDIAN)
+ /* you must determine what the correct bit order is for
+ * your compiler - the next line is an intentional error
+ * which will force your compiles to bomb until you fix
+ * the above macros.
+ */
+ error "Undefined or invalid __BYTE_ORDER";
+#endif
+
+/*
+ * Structure for query header. The order of the fields is machine- and
+ * compiler-dependent, depending on the byte/bit order and the layout
+ * of bit fields. We use bit fields only in int variables, as this
+ * is all ANSI requires. This requires a somewhat confusing rearrangement.
+ */
+
+typedef struct {
+ unsigned id :16; /* query identification number */
+#if __BYTE_ORDER == __BIG_ENDIAN
+ /* fields in third byte */
+ unsigned qr: 1; /* response flag */
+ unsigned opcode: 4; /* purpose of message */
+ unsigned aa: 1; /* authoritive answer */
+ unsigned tc: 1; /* truncated message */
+ unsigned rd: 1; /* recursion desired */
+ /* fields in fourth byte */
+ unsigned ra: 1; /* recursion available */
+ unsigned pr: 1; /* primary server req'd (!standard) */
+ unsigned unused :2; /* unused bits (MBZ as of 4.9.3a3) */
+ unsigned rcode :4; /* response code */
+#endif
+#if __BYTE_ORDER == __LITTLE_ENDIAN || __BYTE_ORDER == __PDP_ENDIAN
+ /* fields in third byte */
+ unsigned rd :1; /* recursion desired */
+ unsigned tc :1; /* truncated message */
+ unsigned aa :1; /* authoritive answer */
+ unsigned opcode :4; /* purpose of message */
+ unsigned qr :1; /* response flag */
+ /* fields in fourth byte */
+ unsigned rcode :4; /* response code */
+ unsigned unused :2; /* unused bits (MBZ as of 4.9.3a3) */
+ unsigned pr :1; /* primary server req'd (!standard) */
+ unsigned ra :1; /* recursion available */
+#endif
+ /* remaining bytes */
+ unsigned qdcount :16; /* number of question entries */
+ unsigned ancount :16; /* number of answer entries */
+ unsigned nscount :16; /* number of authority entries */
+ unsigned arcount :16; /* number of resource entries */
+} HEADER;
+
+/*
+ * Defines for handling compressed domain names
+ */
+#define INDIR_MASK 0xc0
+
+/*
+ * Structure for passing resource records around.
+ */
+struct rrec {
+ int16_t r_zone; /* zone number */
+ int16_t r_class; /* class number */
+ int16_t r_type; /* type number */
+ u_int32_t r_ttl; /* time to live */
+ int r_size; /* size of data area */
+ char *r_data; /* pointer to data */
+};
+
+//extern u_int16_t _getshort __P((const u_char *));
+//extern u_int32_t _getlong __P((const u_char *));
+
+/*
+ * Inline versions of get/put short/long. Pointer is advanced.
+ *
+ * These macros demonstrate the property of C whereby it can be
+ * portable or it can be elegant but rarely both.
+ */
+#define GETSHORT(s, cp) { \
+ register u_char *t_cp = (u_char *)(cp); \
+ (s) = ((u_int16_t)t_cp[0] << 8) \
+ | ((u_int16_t)t_cp[1]) \
+ ; \
+ (cp) += INT16SZ; \
+}
+
+#define GETLONG(l, cp) { \
+ register u_char *t_cp = (u_char *)(cp); \
+ (l) = ((u_int32_t)t_cp[0] << 24) \
+ | ((u_int32_t)t_cp[1] << 16) \
+ | ((u_int32_t)t_cp[2] << 8) \
+ | ((u_int32_t)t_cp[3]) \
+ ; \
+ (cp) += INT32SZ; \
+}
+
+#define PUTSHORT(s, cp) { \
+ register u_int16_t t_s = (u_int16_t)(s); \
+ register u_char *t_cp = (u_char *)(cp); \
+ *t_cp++ = t_s >> 8; \
+ *t_cp = t_s; \
+ (cp) += INT16SZ; \
+}
+
+#define PUTLONG(l, cp) { \
+ register u_int32_t t_l = (u_int32_t)(l); \
+ register u_char *t_cp = (u_char *)(cp); \
+ *t_cp++ = t_l >> 24; \
+ *t_cp++ = t_l >> 16; \
+ *t_cp++ = t_l >> 8; \
+ *t_cp = t_l; \
+ (cp) += INT32SZ; \
+}
+
+#endif /* !_NAMESER_H_ */
diff --git a/libpcap-1.3.0/Win32/Include/bittypes.h b/libpcap-1.3.0/Win32/Include/bittypes.h
new file mode 100644
index 0000000..7c0cbde
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/bittypes.h
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) 1999 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+#ifndef _BITTYPES_H
+#define _BITTYPES_H
+
+#ifndef HAVE_U_INT8_T
+typedef unsigned char u_int8_t;
+typedef signed char int8_t;
+#endif /* HAVE_U_INT8_T */
+
+#ifndef HAVE_U_INT16_T
+typedef unsigned short u_int16_t;
+typedef signed short int16_t;
+#endif /* HAVE_U_INT16_T */
+
+#ifndef HAVE_U_INT32_T
+typedef unsigned int u_int32_t;
+typedef signed int int32_t;
+#endif /* HAVE_U_INT32_T */
+
+#ifndef HAVE_U_INT64_T
+#ifdef _MSC_EXTENSIONS
+typedef unsigned _int64 u_int64_t;
+typedef _int64 int64_t;
+#else /* _MSC_EXTENSIONS */
+typedef unsigned long long u_int64_t;
+typedef long long int64_t;
+#endif /* _MSC_EXTENSIONS */
+#endif /* HAVE_U_INT64_T */
+
+#ifndef PRId64
+#ifdef _MSC_EXTENSIONS
+#define PRId64 "I64d"
+#else /* _MSC_EXTENSIONS */
+#define PRId64 "lld"
+#endif /* _MSC_EXTENSIONS */
+#endif /* PRId64 */
+
+#ifndef PRIo64
+#ifdef _MSC_EXTENSIONS
+#define PRIo64 "I64o"
+#else /* _MSC_EXTENSIONS */
+#define PRIo64 "llo"
+#endif /* _MSC_EXTENSIONS */
+#endif /* PRIo64 */
+
+#ifndef PRIx64
+#ifdef _MSC_EXTENSIONS
+#define PRIx64 "I64x"
+#else /* _MSC_EXTENSIONS */
+#define PRIx64 "llx"
+#endif /* _MSC_EXTENSIONS */
+#endif /* PRIx64 */
+
+#ifndef PRIu64
+#ifdef _MSC_EXTENSIONS
+#define PRIu64 "I64u"
+#else /* _MSC_EXTENSIONS */
+#define PRIu64 "llu"
+#endif /* _MSC_EXTENSIONS */
+#endif /* PRIu64 */
+
+#endif /* _BITTYPES_H */
diff --git a/libpcap-1.3.0/Win32/Include/cdecl_ext.h b/libpcap-1.3.0/Win32/Include/cdecl_ext.h
new file mode 100644
index 0000000..9591db2
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/cdecl_ext.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 1999 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+#ifndef HAVE_PORTABLE_PROTOTYPE
+
+#if defined(__STDC__) || defined(__cplusplus)
+#define __P(protos) protos /* full-blown ANSI C */
+#else
+#define __P(protos) () /* traditional C preprocessor */
+#endif
+
+#endif /* !HAVE_PORTABLE_PROTOTYPE */
diff --git a/libpcap-1.3.0/Win32/Include/inetprivate.h b/libpcap-1.3.0/Win32/Include/inetprivate.h
new file mode 100644
index 0000000..e25ed3d
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/inetprivate.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright (c) 1999 - 2003
+ * NetGroup, Politecnico di Torino (Italy)
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the Politecnico di Torino nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#include <sys/types.h>
+#include <string.h>
+#include <stdlib.h>
+#include <ctype.h>
+#include <net/netdb.h>
+#include <stdio.h>
+#include <errno.h>
+#include <arpa/nameser.h>
+
+extern void _sethtent(int f);
+extern void _endhtent(void);
+extern struct hostent *_gethtent(void);
+extern struct hostent *_gethtbyname(const char *name);
+extern struct hostent *_gethtbyaddr(const char *addr, int len,
+ int type);
+extern int _validuser(FILE *hostf, const char *rhost,
+ const char *luser, const char *ruser, int baselen);
+extern int _checkhost(const char *rhost, const char *lhost, int len);
+#if 0
+extern void putlong(u_long l, u_char *msgp);
+extern void putshort(u_short l, u_char *msgp);
+extern u_int32_t _getlong(register const u_char *msgp);
+extern u_int16_t _getshort(register const u_char *msgp);
+extern void p_query(char *msg);
+extern void fp_query(char *msg, FILE *file);
+extern char *p_cdname(char *cp, char *msg, FILE *file);
+extern char *p_rr(char *cp, char *msg, FILE *file);
+extern char *p_type(int type);
+extern char * p_class(int class);
+extern char *p_time(u_long value);
+#endif
+extern char * hostalias(const char *name);
+extern void sethostfile(char *name);
+extern void _res_close (void);
+extern void ruserpass(const char *host, char **aname, char **apass);
diff --git a/libpcap-1.3.0/Win32/Include/ip6_misc.h b/libpcap-1.3.0/Win32/Include/ip6_misc.h
new file mode 100644
index 0000000..562fa61
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/ip6_misc.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (c) 1993, 1994, 1997
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that: (1) source code distributions
+ * retain the above copyright notice and this paragraph in its entirety, (2)
+ * distributions including binary code include the above copyright notice and
+ * this paragraph in its entirety in the documentation or other materials
+ * provided with the distribution, and (3) all advertising materials mentioning
+ * features or use of this software display the following acknowledgement:
+ * ``This product includes software developed by the University of California,
+ * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
+ * the University nor the names of its contributors may be used to endorse
+ * or promote products derived from this software without specific prior
+ * written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/Win32/Include/ip6_misc.h,v 1.5 2006-01-22 18:02:18 gianluca Exp $ (LBL)
+ */
+
+/*
+ * This file contains a collage of declarations for IPv6 from FreeBSD not present in Windows
+ */
+
+#include <winsock2.h>
+
+#include <ws2tcpip.h>
+
+#ifndef __MINGW32__
+#define IN_MULTICAST(a) IN_CLASSD(a)
+#endif
+
+#define IN_EXPERIMENTAL(a) ((((u_int32_t) (a)) & 0xf0000000) == 0xf0000000)
+
+#define IN_LOOPBACKNET 127
+
+#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)
+/* IPv6 address */
+struct in6_addr
+ {
+ union
+ {
+ u_int8_t u6_addr8[16];
+ u_int16_t u6_addr16[8];
+ u_int32_t u6_addr32[4];
+ } in6_u;
+#define s6_addr in6_u.u6_addr8
+#define s6_addr16 in6_u.u6_addr16
+#define s6_addr32 in6_u.u6_addr32
+#define s6_addr64 in6_u.u6_addr64
+ };
+
+#define IN6ADDR_ANY_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
+#define IN6ADDR_LOOPBACK_INIT { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1 }
+#endif /* __MINGW32__ */
+
+
+#if (defined _MSC_VER) || (defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF))
+typedef unsigned short sa_family_t;
+#endif
+
+
+#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)
+
+#define __SOCKADDR_COMMON(sa_prefix) \
+ sa_family_t sa_prefix##family
+
+/* Ditto, for IPv6. */
+struct sockaddr_in6
+ {
+ __SOCKADDR_COMMON (sin6_);
+ u_int16_t sin6_port; /* Transport layer port # */
+ u_int32_t sin6_flowinfo; /* IPv6 flow information */
+ struct in6_addr sin6_addr; /* IPv6 address */
+ };
+
+#define IN6_IS_ADDR_V4MAPPED(a) \
+ ((((u_int32_t *) (a))[0] == 0) && (((u_int32_t *) (a))[1] == 0) && \
+ (((u_int32_t *) (a))[2] == htonl (0xffff)))
+
+#define IN6_IS_ADDR_MULTICAST(a) (((u_int8_t *) (a))[0] == 0xff)
+
+#define IN6_IS_ADDR_LINKLOCAL(a) \
+ ((((u_int32_t *) (a))[0] & htonl (0xffc00000)) == htonl (0xfe800000))
+
+#define IN6_IS_ADDR_LOOPBACK(a) \
+ (((u_int32_t *) (a))[0] == 0 && ((u_int32_t *) (a))[1] == 0 && \
+ ((u_int32_t *) (a))[2] == 0 && ((u_int32_t *) (a))[3] == htonl (1))
+#endif /* __MINGW32__ */
+
+#define ip6_vfc ip6_ctlun.ip6_un2_vfc
+#define ip6_flow ip6_ctlun.ip6_un1.ip6_un1_flow
+#define ip6_plen ip6_ctlun.ip6_un1.ip6_un1_plen
+#define ip6_nxt ip6_ctlun.ip6_un1.ip6_un1_nxt
+#define ip6_hlim ip6_ctlun.ip6_un1.ip6_un1_hlim
+#define ip6_hops ip6_ctlun.ip6_un1.ip6_un1_hlim
+
+#define nd_rd_type nd_rd_hdr.icmp6_type
+#define nd_rd_code nd_rd_hdr.icmp6_code
+#define nd_rd_cksum nd_rd_hdr.icmp6_cksum
+#define nd_rd_reserved nd_rd_hdr.icmp6_data32[0]
+
+/*
+ * IPV6 extension headers
+ */
+#define IPPROTO_HOPOPTS 0 /* IPv6 hop-by-hop options */
+#define IPPROTO_IPV6 41 /* IPv6 header. */
+#define IPPROTO_ROUTING 43 /* IPv6 routing header */
+#define IPPROTO_FRAGMENT 44 /* IPv6 fragmentation header */
+#define IPPROTO_ESP 50 /* encapsulating security payload */
+#define IPPROTO_AH 51 /* authentication header */
+#define IPPROTO_ICMPV6 58 /* ICMPv6 */
+#define IPPROTO_NONE 59 /* IPv6 no next header */
+#define IPPROTO_DSTOPTS 60 /* IPv6 destination options */
+#define IPPROTO_PIM 103 /* Protocol Independent Multicast. */
+
+#define IPV6_RTHDR_TYPE_0 0
+
+/* Option types and related macros */
+#define IP6OPT_PAD1 0x00 /* 00 0 00000 */
+#define IP6OPT_PADN 0x01 /* 00 0 00001 */
+#define IP6OPT_JUMBO 0xC2 /* 11 0 00010 = 194 */
+#define IP6OPT_JUMBO_LEN 6
+#define IP6OPT_ROUTER_ALERT 0x05 /* 00 0 00101 */
+
+#define IP6OPT_RTALERT_LEN 4
+#define IP6OPT_RTALERT_MLD 0 /* Datagram contains an MLD message */
+#define IP6OPT_RTALERT_RSVP 1 /* Datagram contains an RSVP message */
+#define IP6OPT_RTALERT_ACTNET 2 /* contains an Active Networks msg */
+#define IP6OPT_MINLEN 2
+
+#define IP6OPT_BINDING_UPDATE 0xc6 /* 11 0 00110 */
+#define IP6OPT_BINDING_ACK 0x07 /* 00 0 00111 */
+#define IP6OPT_BINDING_REQ 0x08 /* 00 0 01000 */
+#define IP6OPT_HOME_ADDRESS 0xc9 /* 11 0 01001 */
+#define IP6OPT_EID 0x8a /* 10 0 01010 */
+
+#define IP6OPT_TYPE(o) ((o) & 0xC0)
+#define IP6OPT_TYPE_SKIP 0x00
+#define IP6OPT_TYPE_DISCARD 0x40
+#define IP6OPT_TYPE_FORCEICMP 0x80
+#define IP6OPT_TYPE_ICMP 0xC0
+
+#define IP6OPT_MUTABLE 0x20
+
+
+#if defined(__MINGW32__) && defined(DEFINE_ADDITIONAL_IPV6_STUFF)
+#ifndef EAI_ADDRFAMILY
+struct addrinfo {
+ int ai_flags; /* AI_PASSIVE, AI_CANONNAME */
+ int ai_family; /* PF_xxx */
+ int ai_socktype; /* SOCK_xxx */
+ int ai_protocol; /* 0 or IPPROTO_xxx for IPv4 and IPv6 */
+ size_t ai_addrlen; /* length of ai_addr */
+ char *ai_canonname; /* canonical name for hostname */
+ struct sockaddr *ai_addr; /* binary address */
+ struct addrinfo *ai_next; /* next structure in linked list */
+};
+#endif
+#endif /* __MINGW32__ */
diff --git a/libpcap-1.3.0/Win32/Include/net/if.h b/libpcap-1.3.0/Win32/Include/net/if.h
new file mode 100644
index 0000000..bf926b6
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/net/if.h
@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 1982, 1986, 1989, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)if.h 8.1 (Berkeley) 6/10/93
+ * $FreeBSD: src/sys/net/if.h,v 1.49.2.1 1999/08/29 16:28:15 peter Exp $
+ */
+
+#ifndef _NET_IF_H_
+#define _NET_IF_H_
+
+/*
+ * <net/if.h> does not depend on <sys/time.h> on most other systems. This
+ * helps userland compatability. (struct timeval ifi_lastchange)
+ */
+#ifndef KERNEL
+#include <pcap-stdinc.h>
+#endif
+
+/*
+ * Structure describing information about an interface
+ * which may be of interest to management entities.
+ */
+struct if_data {
+ /* generic interface information */
+ u_char ifi_type; /* ethernet, tokenring, etc */
+ u_char ifi_physical; /* e.g., AUI, Thinnet, 10base-T, etc */
+ u_char ifi_addrlen; /* media address length */
+ u_char ifi_hdrlen; /* media header length */
+ u_char ifi_recvquota; /* polling quota for receive intrs */
+ u_char ifi_xmitquota; /* polling quota for xmit intrs */
+ u_long ifi_mtu; /* maximum transmission unit */
+ u_long ifi_metric; /* routing metric (external only) */
+ u_long ifi_baudrate; /* linespeed */
+ /* volatile statistics */
+ u_long ifi_ipackets; /* packets received on interface */
+ u_long ifi_ierrors; /* input errors on interface */
+ u_long ifi_opackets; /* packets sent on interface */
+ u_long ifi_oerrors; /* output errors on interface */
+ u_long ifi_collisions; /* collisions on csma interfaces */
+ u_long ifi_ibytes; /* total number of octets received */
+ u_long ifi_obytes; /* total number of octets sent */
+ u_long ifi_imcasts; /* packets received via multicast */
+ u_long ifi_omcasts; /* packets sent via multicast */
+ u_long ifi_iqdrops; /* dropped on input, this interface */
+ u_long ifi_noproto; /* destined for unsupported protocol */
+ u_long ifi_recvtiming; /* usec spent receiving when timing */
+ u_long ifi_xmittiming; /* usec spent xmitting when timing */
+ struct timeval ifi_lastchange; /* time of last administrative change */
+};
+
+/* ws2tcpip.h has interface flags: IFF_* */
+#if 0
+#define IFF_UP 0x1 /* interface is up */
+#define IFF_BROADCAST 0x2 /* broadcast address valid */
+#define IFF_DEBUG 0x4 /* turn on debugging */
+#define IFF_LOOPBACK 0x8 /* is a loopback net */
+#define IFF_POINTOPOINT 0x10 /* interface is point-to-point link */
+/*#define IFF_NOTRAILERS 0x20 * obsolete: avoid use of trailers */
+#define IFF_RUNNING 0x40 /* resources allocated */
+#define IFF_NOARP 0x80 /* no address resolution protocol */
+#define IFF_PROMISC 0x100 /* receive all packets */
+#define IFF_ALLMULTI 0x200 /* receive all multicast packets */
+#define IFF_OACTIVE 0x400 /* transmission in progress */
+#define IFF_SIMPLEX 0x800 /* can't hear own transmissions */
+#define IFF_LINK0 0x1000 /* per link layer defined bit */
+#define IFF_LINK1 0x2000 /* per link layer defined bit */
+#define IFF_LINK2 0x4000 /* per link layer defined bit */
+#define IFF_ALTPHYS IFF_LINK2 /* use alternate physical connection */
+#define IFF_MULTICAST 0x8000 /* supports multicast */
+#endif /* 0 */
+
+/* flags set internally only: */
+#define IFF_CANTCHANGE \
+ (IFF_BROADCAST|IFF_POINTOPOINT|IFF_RUNNING|IFF_OACTIVE|\
+ IFF_SIMPLEX|IFF_MULTICAST|IFF_ALLMULTI)
+
+#define IFQ_MAXLEN 50
+#define IFNET_SLOWHZ 1 /* granularity is 1 second */
+
+/*
+ * Message format for use in obtaining information about interfaces
+ * from getkerninfo and the routing socket
+ */
+struct if_msghdr {
+ u_short ifm_msglen; /* to skip over non-understood messages */
+ u_char ifm_version; /* future binary compatability */
+ u_char ifm_type; /* message type */
+ int ifm_addrs; /* like rtm_addrs */
+ int ifm_flags; /* value of if_flags */
+ u_short ifm_index; /* index for associated ifp */
+ struct if_data ifm_data;/* statistics and other data about if */
+};
+
+/*
+ * Message format for use in obtaining information about interface addresses
+ * from getkerninfo and the routing socket
+ */
+struct ifa_msghdr {
+ u_short ifam_msglen; /* to skip over non-understood messages */
+ u_char ifam_version; /* future binary compatability */
+ u_char ifam_type; /* message type */
+ int ifam_addrs; /* like rtm_addrs */
+ int ifam_flags; /* value of ifa_flags */
+ u_short ifam_index; /* index for associated ifp */
+ int ifam_metric; /* value of ifa_metric */
+};
+
+/*
+ * Message format for use in obtaining information about multicast addresses
+ * from the routing socket
+ */
+struct ifma_msghdr {
+ u_short ifmam_msglen; /* to skip over non-understood messages */
+ u_char ifmam_version; /* future binary compatability */
+ u_char ifmam_type; /* message type */
+ int ifmam_addrs; /* like rtm_addrs */
+ int ifmam_flags; /* value of ifa_flags */
+ u_short ifmam_index; /* index for associated ifp */
+};
+
+/*
+ * Interface request structure used for socket
+ * ioctl's. All interface ioctl's must have parameter
+ * definitions which begin with ifr_name. The
+ * remainder may be interface specific.
+ */
+struct ifreq {
+#define IFNAMSIZ 16
+ char ifr_name[IFNAMSIZ]; /* if name, e.g. "en0" */
+ union {
+ struct sockaddr ifru_addr;
+ struct sockaddr ifru_dstaddr;
+ struct sockaddr ifru_broadaddr;
+ short ifru_flags;
+ int ifru_metric;
+ int ifru_mtu;
+ int ifru_phys;
+ int ifru_media;
+ caddr_t ifru_data;
+ } ifr_ifru;
+#define ifr_addr ifr_ifru.ifru_addr /* address */
+#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-to-p link */
+#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
+#define ifr_flags ifr_ifru.ifru_flags /* flags */
+#define ifr_metric ifr_ifru.ifru_metric /* metric */
+#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
+#define ifr_phys ifr_ifru.ifru_phys /* physical wire */
+#define ifr_media ifr_ifru.ifru_media /* physical media */
+#define ifr_data ifr_ifru.ifru_data /* for use by interface */
+};
+
+#define _SIZEOF_ADDR_IFREQ(ifr) \
+ ((ifr).ifr_addr.sa_len > sizeof(struct sockaddr) ? \
+ (sizeof(struct ifreq) - sizeof(struct sockaddr) + \
+ (ifr).ifr_addr.sa_len) : sizeof(struct ifreq))
+
+struct ifaliasreq {
+ char ifra_name[IFNAMSIZ]; /* if name, e.g. "en0" */
+ struct sockaddr ifra_addr;
+ struct sockaddr ifra_broadaddr;
+ struct sockaddr ifra_mask;
+};
+
+struct ifmediareq {
+ char ifm_name[IFNAMSIZ]; /* if name, e.g. "en0" */
+ int ifm_current; /* current media options */
+ int ifm_mask; /* don't care mask */
+ int ifm_status; /* media status */
+ int ifm_active; /* active options */
+ int ifm_count; /* # entries in ifm_ulist array */
+ int *ifm_ulist; /* media words */
+};
+/*
+ * Structure used in SIOCGIFCONF request.
+ * Used to retrieve interface configuration
+ * for machine (useful for programs which
+ * must know all networks accessible).
+ */
+struct ifconf {
+ int ifc_len; /* size of associated buffer */
+ union {
+ caddr_t ifcu_buf;
+ struct ifreq *ifcu_req;
+ } ifc_ifcu;
+#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
+#define ifc_req ifc_ifcu.ifcu_req /* array of structures returned */
+};
+
+#ifdef KERNEL
+#ifdef MALLOC_DECLARE
+MALLOC_DECLARE(M_IFADDR);
+MALLOC_DECLARE(M_IFMADDR);
+#endif
+#endif
+
+/* XXX - this should go away soon */
+#ifdef KERNEL
+#include <net/if_var.h>
+#endif
+
+#endif /* !_NET_IF_H_ */
diff --git a/libpcap-1.3.0/Win32/Include/net/netdb.h b/libpcap-1.3.0/Win32/Include/net/netdb.h
new file mode 100644
index 0000000..b9d45ac
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/net/netdb.h
@@ -0,0 +1,164 @@
+/*-
+ * Copyright (c) 1980, 1983, 1988, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)netdb.h 8.1 (Berkeley) 6/2/93
+ * netdb.h,v 1.4 1995/08/14 04:05:04 hjl Exp
+ * -
+ * Portions Copyright (c) 1993 by Digital Equipment Corporation.
+ *
+ * Permission to use, copy, modify and distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies, and that
+ * the name of Digital Equipment Corporation not be used in advertising or
+ * publicity pertaining to distribution of the document or software without
+ * specific, written prior permission.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL
+ * WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL DIGITAL EQUIPMENT
+ * CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL
+ * DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR
+ * PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS
+ * ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+ * SOFTWARE.
+ * -
+ * --Copyright--
+ */
+
+#ifndef _NETDB_H_
+#define _NETDB_H_
+
+#if defined(_POSIX_THREAD_SAFE_FUNCTIONS) || defined(_REENTRANT)
+#include <stdio.h>
+#include <netinet/in.h>
+#endif
+
+#include <winsock2.h>
+#include <net/paths.h>
+
+#define _PATH_HEQUIV __PATH_ETC_INET"/hosts.equiv"
+#define _PATH_HOSTS __PATH_ETC_INET"/hosts"
+#define _PATH_NETWORKS __PATH_ETC_INET"/networks"
+#define _PATH_PROTOCOLS __PATH_ETC_INET"/protocols"
+#define _PATH_SERVICES __PATH_ETC_INET"/services"
+#define _PATH_RESCONF __PATH_ETC_INET"/resolv.conf"
+#define _PATH_RPC __PATH_ETC_INET"/rpc"
+
+struct rpcent {
+ char *r_name; /* name of server for this rpc program */
+ char **r_aliases; /* alias list */
+ int r_number; /* rpc program number */
+};
+
+#ifndef WIN32
+#if defined(_POSIX_THREAD_SAFE_FUNCTIONS) || defined(_REENTRANT)
+
+#define __NETDB_MAXALIASES 35
+#define __NETDB_MAXADDRS 35
+
+/*
+ * Error return codes from gethostbyname() and gethostbyaddr()
+ * (left in extern int h_errno).
+ */
+#define h_errno (*__h_errno_location ())
+#else
+extern int h_errno;
+#endif
+#endif
+
+#define NETDB_INTERNAL -1 /* see errno */
+#define NETDB_SUCCESS 0 /* no problem */
+
+//#include <features.h>
+
+void endhostent (void);
+void endnetent (void);
+void endprotoent (void);
+void endservent (void);
+void endrpcent (void);
+struct hostent *gethostent (void);
+struct netent *getnetbyaddr (long, int); /* u_long? */
+struct netent *getnetbyname (const char *);
+struct netent *getnetent (void);
+struct protoent *getprotoent (void);
+struct servent *getservent (void);
+struct rpcent *getrpcent (void);
+struct rpcent *getrpcbyname (const char *);
+struct rpcent *getrpcbynumber (int);
+void herror (const char *);
+void sethostent (int);
+/* void sethostfile (const char *); */
+void setnetent (int);
+void setprotoent (int);
+void setservent (int);
+void setrpcent (int);
+
+#if defined(_POSIX_THREAD_SAFE_FUNCTIONS) || defined(_REENTRANT)
+struct hostent *gethostbyaddr_r (const char *__addr,
+ int __length, int __type,
+ struct hostent *__result,
+ char *__buffer, int __buflen, int *__h_errnop);
+struct hostent *gethostbyname_r (const char * __name,
+ struct hostent *__result, char *__buffer,
+ int __buflen, int *__h_errnop);
+struct hostent *gethostent_r (struct hostent *__result,
+ char *__buffer, int __buflen, int *__h_errnop);
+struct netent *getnetbyaddr_r (long __net, int __type,
+ struct netent *__result, char *__buffer,
+ int __buflen);
+struct netent *getnetbyname_r (const char * __name,
+ struct netent *__result, char *__buffer,
+ int __buflen);
+struct netent *getnetent_r (struct netent *__result,
+ char *__buffer, int __buflen);
+struct protoent *getprotobyname_r (const char * __name,
+ struct protoent *__result, char *__buffer,
+ int __buflen);
+struct protoent *getprotobynumber_r (int __proto,
+ struct protoent *__result, char *__buffer,
+ int __buflen);
+struct protoent *getprotoent_r (struct protoent *__result,
+ char *__buffer, int __buflen);
+struct servent *getservbyname_r (const char * __name,
+ const char *__proto, struct servent *__result,
+ char *__buffer, int __buflen);
+struct servent *getservbyport_r (int __port,
+ const char *__proto, struct servent *__result,
+ char *__buffer, int __buflen);
+struct servent *getservent_r (struct servent *__result,
+ char *__buffer, int __buflen);
+
+int *__h_errno_location (void);
+
+#endif
+
+#endif /* !_NETDB_H_ */
diff --git a/libpcap-1.3.0/Win32/Include/net/paths.h b/libpcap-1.3.0/Win32/Include/net/paths.h
new file mode 100644
index 0000000..987de4f
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/net/paths.h
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 1989 The Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)paths.h 5.15 (Berkeley) 5/29/91
+ */
+
+#ifndef _PATHS_H_
+#define _PATHS_H_
+
+#if 0
+#define __PATH_ETC_INET "/usr/etc/inet"
+#else
+#define __PATH_ETC_INET "/etc"
+#endif
+
+/* Default search path. */
+#define _PATH_DEFPATH "/usr/local/bin:/usr/bin:/bin:."
+#define _PATH_DEFPATH_ROOT "/sbin:/bin:/usr/sbin:/usr/bin"
+
+#define _PATH_BSHELL "/bin/sh"
+#define _PATH_CONSOLE "/dev/console"
+#define _PATH_CSHELL "/bin/csh"
+#define _PATH_DEVDB "/var/run/dev.db"
+#define _PATH_DEVNULL "/dev/null"
+#define _PATH_DRUM "/dev/drum"
+#define _PATH_HEQUIV __PATH_ETC_INET"/hosts.equiv"
+#define _PATH_KMEM "/dev/kmem"
+#define _PATH_MAILDIR "/var/spool/mail"
+#define _PATH_MAN "/usr/man"
+#define _PATH_MEM "/dev/mem"
+#define _PATH_LOGIN "/bin/login"
+#define _PATH_NOLOGIN "/etc/nologin"
+#define _PATH_SENDMAIL "/usr/sbin/sendmail"
+#define _PATH_SHELLS "/etc/shells"
+#define _PATH_TTY "/dev/tty"
+#define _PATH_UNIX "/vmlinux"
+#define _PATH_VI "/usr/bin/vi"
+
+/* Provide trailing slash, since mostly used for building pathnames. */
+#define _PATH_DEV "/dev/"
+#define _PATH_TMP "/tmp/"
+#define _PATH_VARRUN "/var/run/"
+#define _PATH_VARTMP "/var/tmp/"
+
+#define _PATH_KLOG "/proc/kmsg"
+#define _PATH_LOGCONF __PATH_ETC_INET"/syslog.conf"
+#if 0
+#define _PATH_LOGPID __PATH_ETC_INET"/syslog.pid"
+#else
+#define _PATH_LOGPID "/var/run/syslog.pid"
+#endif
+#define _PATH_LOG "/dev/log"
+#define _PATH_CONSOLE "/dev/console"
+
+#if 0
+#define _PATH_UTMP "/var/adm/utmp"
+#define _PATH_WTMP "/var/adm/wtmp"
+#define _PATH_LASTLOG "/var/adm/lastlog"
+#else
+#define _PATH_UTMP "/var/run/utmp"
+#define _PATH_WTMP "/var/log/wtmp"
+#define _PATH_LASTLOG "/var/log/lastlog"
+#endif
+
+#define _PATH_LOCALE "/usr/lib/locale"
+
+#define _PATH_RWHODIR "/var/spool/rwho"
+
+#if _MIT_POSIX_THREADS
+/* For the MIT pthreads */
+#define _PATH_PTY "/dev/"
+#define _PATH_TZDIR "/usr/lib/zoneinfo"
+#define _PATH_TZFILE "/usr/lib/zoneinfo/localtime"
+#endif
+
+#endif /* !_PATHS_H_ */
diff --git a/libpcap-1.3.0/Win32/Include/sockstorage.h b/libpcap-1.3.0/Win32/Include/sockstorage.h
new file mode 100644
index 0000000..557eb4d
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Include/sockstorage.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 1999 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+struct sockaddr_storage {
+#ifdef HAVE_SOCKADDR_SA_LEN
+ u_int8_t __ss_len;
+ u_int8_t __ss_family;
+ u_int8_t fill[126];
+#else
+ u_int8_t __ss_family;
+ u_int8_t fill[127];
+#endif /* HAVE_SOCKADDR_SA_LEN */
+};
diff --git a/libpcap-1.3.0/Win32/Prj/libpcap.dsp b/libpcap-1.3.0/Win32/Prj/libpcap.dsp
new file mode 100644
index 0000000..17e5a70
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Prj/libpcap.dsp
@@ -0,0 +1,168 @@
+# Microsoft Developer Studio Project File - Name="libpcap" - Package Owner=<4>
+# Microsoft Developer Studio Generated Build File, Format Version 6.00
+# ** DO NOT EDIT **
+
+# TARGTYPE "Win32 (x86) Static Library" 0x0104
+
+CFG=libpcap - Win32 Debug
+!MESSAGE This is not a valid makefile. To build this project using NMAKE,
+!MESSAGE use the Export Makefile command and run
+!MESSAGE
+!MESSAGE NMAKE /f "libpcap.mak".
+!MESSAGE
+!MESSAGE You can specify a configuration when running NMAKE
+!MESSAGE by defining the macro CFG on the command line. For example:
+!MESSAGE
+!MESSAGE NMAKE /f "libpcap.mak" CFG="libpcap - Win32 Debug"
+!MESSAGE
+!MESSAGE Possible choices for configuration are:
+!MESSAGE
+!MESSAGE "libpcap - Win32 Release" (based on "Win32 (x86) Static Library")
+!MESSAGE "libpcap - Win32 Debug" (based on "Win32 (x86) Static Library")
+!MESSAGE
+
+# Begin Project
+# PROP AllowPerConfigDependencies 0
+# PROP Scc_ProjName ""
+# PROP Scc_LocalPath ""
+CPP=cl.exe
+RSC=rc.exe
+
+!IF "$(CFG)" == "libpcap - Win32 Release"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 0
+# PROP BASE Output_Dir "Release"
+# PROP BASE Intermediate_Dir "Release"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 0
+# PROP Output_Dir "Release"
+# PROP Intermediate_Dir "Release"
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_MBCS" /D "_LIB" /YX /FD /c
+# ADD CPP /nologo /MT /W3 /GX /O2 /I "../../" /I "../../lbl/" /I "../../bpf/" /I "../include/" /I "../../../../common" /I "../../../../dag/include" /I "../../../../dag/drv/windows" /D "NDEBUG" /D "YY_NEVER_INTERACTIVE" /D yylval=pcap_lval /D "_USRDLL" /D "LIBPCAP_EXPORTS" /D "HAVE_STRERROR" /D "__STDC__" /D "INET6" /D "_WINDOWS" /D "_MBCS" /D "HAVE_ADDRINFO" /D "WIN32" /D _U_= /D "HAVE_SNPRINTF" /D "HAVE_VSNPRINTF" /YX /FD /c
+# ADD BASE RSC /l 0x409 /d "NDEBUG"
+# ADD RSC /l 0x409 /d "NDEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ELSEIF "$(CFG)" == "libpcap - Win32 Debug"
+
+# PROP BASE Use_MFC 0
+# PROP BASE Use_Debug_Libraries 1
+# PROP BASE Output_Dir "Debug"
+# PROP BASE Intermediate_Dir "Debug"
+# PROP BASE Target_Dir ""
+# PROP Use_MFC 0
+# PROP Use_Debug_Libraries 1
+# PROP Output_Dir "Debug"
+# PROP Intermediate_Dir "Debug"
+# PROP Target_Dir ""
+# ADD BASE CPP /nologo /W3 /Gm /GX /ZI /Od /D "WIN32" /D "_DEBUG" /D "_MBCS" /D "_LIB" /YX /FD /GZ /c
+# ADD CPP /nologo /MTd /W3 /Gm /GX /ZI /Od /I "../../" /I "../../lbl/" /I "../../bpf/" /I "../include/" /I "../../../../common" /I "../../../../dag/include" /I "../../../../dag/drv/windows" /D "_DEBUG" /D "YY_NEVER_INTERACTIVE" /D yylval=pcap_lval /D "_USRDLL" /D "LIBPCAP_EXPORTS" /D "HAVE_STRERROR" /D "__STDC__" /D "INET6" /D "_WINDOWS" /D "_MBCS" /D "HAVE_ADDRINFO" /D "WIN32" /D _U_= /D "HAVE_SNPRINTF" /D "HAVE_VSNPRINTF" /YX /FD /GZ /c
+# ADD BASE RSC /l 0x409 /d "_DEBUG"
+# ADD RSC /l 0x409 /d "_DEBUG"
+BSC32=bscmake.exe
+# ADD BASE BSC32 /nologo
+# ADD BSC32 /nologo
+LIB32=link.exe -lib
+# ADD BASE LIB32 /nologo
+# ADD LIB32 /nologo
+
+!ENDIF
+
+# Begin Target
+
+# Name "libpcap - Win32 Release"
+# Name "libpcap - Win32 Debug"
+# Begin Source File
+
+SOURCE=..\..\bpf_dump.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\bpf\net\bpf_filter.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\bpf_image.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\etherent.c
+# End Source File
+# Begin Source File
+
+SOURCE="..\..\fad-win32.c"
+# End Source File
+# Begin Source File
+
+SOURCE=..\Src\ffs.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\gencode.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\Src\getnetbynm.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\Src\getnetent.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\Src\getservent.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\grammar.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\inet.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\Src\inet_aton.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\Src\inet_net.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\Src\inet_pton.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\nametoaddr.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\optimize.c
+# End Source File
+# Begin Source File
+
+SOURCE="..\..\Pcap-win32.c"
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\pcap.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\savefile.c
+# End Source File
+# Begin Source File
+
+SOURCE=..\..\scanner.c
+# End Source File
+# End Target
+# End Project
diff --git a/libpcap-1.3.0/Win32/Prj/libpcap.dsw b/libpcap-1.3.0/Win32/Prj/libpcap.dsw
new file mode 100644
index 0000000..8cdff2d
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Prj/libpcap.dsw
@@ -0,0 +1,29 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNING: DO NOT EDIT OR DELETE THIS WORKSPACE FILE!
+
+###############################################################################
+
+Project: "libpcap"=".\libpcap.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+
diff --git a/libpcap-1.3.0/Win32/Src/ffs.c b/libpcap-1.3.0/Win32/Src/ffs.c
new file mode 100644
index 0000000..099ff8e
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/ffs.c
@@ -0,0 +1,54 @@
+/*-
+ * Copyright (c) 1990, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#if defined(LIBC_SCCS) && !defined(lint)
+static char sccsid[] = "@(#)ffs.c 8.1 (Berkeley) 6/4/93";
+#endif /* LIBC_SCCS and not lint */
+
+#include <string.h>
+
+/*
+ * ffs -- vax ffs instruction
+ */
+int
+ffs(mask)
+ register int mask;
+{
+ register int bit;
+
+ if (mask == 0)
+ return(0);
+ for (bit = 1; !(mask & 1); bit++)
+ mask >>= 1;
+ return(bit);
+}
diff --git a/libpcap-1.3.0/Win32/Src/gai_strerror.c b/libpcap-1.3.0/Win32/Src/gai_strerror.c
new file mode 100644
index 0000000..edd970b
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/gai_strerror.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+#include <sys/cdefs.h>
+
+__FBSDID("$FreeBSD: /repoman/r/ncvs/src/lib/libc/net/gai_strerror.c,v 1.1 2005/04/06 12:45:51 ume Exp $");
+
+*/
+
+#ifdef WIN32
+
+#include <ws2tcpip.h>
+
+#else
+
+#include <netdb.h>
+
+#endif
+
+/* Entries EAI_ADDRFAMILY (1) and EAI_NODATA (7) are obsoleted, but left */
+/* for backward compatibility with userland code prior to 2553bis-02 */
+static char *ai_errlist[] = {
+ "Success", /* 0 */
+ "Address family for hostname not supported", /* 1 */
+ "Temporary failure in name resolution", /* EAI_AGAIN */
+ "Invalid value for ai_flags", /* EAI_BADFLAGS */
+ "Non-recoverable failure in name resolution", /* EAI_FAIL */
+ "ai_family not supported", /* EAI_FAMILY */
+ "Memory allocation failure", /* EAI_MEMORY */
+ "No address associated with hostname", /* 7 */
+ "hostname nor servname provided, or not known", /* EAI_NONAME */
+ "servname not supported for ai_socktype", /* EAI_SERVICE */
+ "ai_socktype not supported", /* EAI_SOCKTYPE */
+ "System error returned in errno", /* EAI_SYSTEM */
+ "Invalid value for hints", /* EAI_BADHINTS */
+ "Resolved protocol is unknown" /* EAI_PROTOCOL */
+};
+
+#ifndef EAI_MAX
+#define EAI_MAX (sizeof(ai_errlist)/sizeof(ai_errlist[0]))
+#endif
+
+/* on MingW, gai_strerror is available.
+ We need to compile gai_strerrorA only for Cygwin
+ */
+#ifndef gai_strerror
+
+char *
+WSAAPI gai_strerrorA(int ecode)
+{
+ if (ecode >= 0 && ecode < EAI_MAX)
+ return ai_errlist[ecode];
+ return "Unknown error";
+}
+
+#endif /* gai_strerror */
\ No newline at end of file
diff --git a/libpcap-1.3.0/Win32/Src/getaddrinfo.c b/libpcap-1.3.0/Win32/Src/getaddrinfo.c
new file mode 100644
index 0000000..ebfe8c2
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/getaddrinfo.c
@@ -0,0 +1,1129 @@
+/*
+ * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the project nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * "#ifdef FAITH" part is local hack for supporting IPv4-v6 translator.
+ *
+ * Issues to be discussed:
+ * - Thread safe-ness must be checked.
+ * - Return values. There are nonstandard return values defined and used
+ * in the source code. This is because RFC2553 is silent about which error
+ * code must be returned for which situation.
+ * Note:
+ * - We use getipnodebyname() just for thread-safeness. There's no intent
+ * to let it do PF_UNSPEC (actually we never pass PF_UNSPEC to
+ * getipnodebyname().
+ * - The code filters out AFs that are not supported by the kernel,
+ * when globbing NULL hostname (to loopback, or wildcard). Is it the right
+ * thing to do? What is the relationship with post-RFC2553 AI_ADDRCONFIG
+ * in ai_flags?
+ */
+
+/*
+ * Mingw64 has its own implementation of getaddrinfo, mingw32 no
+ */
+#ifndef __MINGW64__
+
+
+#ifdef HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#ifndef lint
+static const char rcsid[] _U_ =
+ "@(#) $Header: /tcpdump/master/libpcap/Win32/Src/getaddrinfo.c,v 1.3 2008-09-15 23:37:51 guy Exp $";
+#endif
+
+#include <pcap-stdinc.h>
+#if 0
+#include <sys/sysctl.h>
+#endif
+#ifndef __MINGW32__
+#include <arpa/nameser.h>
+#endif
+#include <string.h>
+#include <stdlib.h>
+#include <stddef.h>
+#include <ctype.h>
+#include <stdio.h>
+#include <errno.h>
+
+#ifndef HAVE_PORTABLE_PROTOTYPE
+#include "cdecl_ext.h"
+#endif
+
+#ifndef HAVE_U_INT32_T
+#include "bittypes.h"
+#endif
+
+#ifndef HAVE_SOCKADDR_STORAGE
+#ifndef __MINGW32__
+#include "sockstorage.h"
+#endif
+#endif
+
+#ifdef NEED_ADDRINFO_H
+#include "addrinfo.h"
+#ifdef WIN32
+#include "ip6_misc.h"
+#endif
+#endif
+
+
+#if defined(__KAME__) && defined(INET6)
+# define FAITH
+#endif
+
+#define SUCCESS 0
+#define ANY 0
+#define YES 1
+#define NO 0
+
+#ifdef FAITH
+static int translate = NO;
+static struct in6_addr faith_prefix = IN6ADDR_ANY_INIT;
+#endif
+
+static const char in_addrany[] = { 0, 0, 0, 0 };
+static const char in6_addrany[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+static const char in_loopback[] = { 127, 0, 0, 1 };
+static const char in6_loopback[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1
+};
+
+struct sockinet {
+ u_char si_len;
+ u_char si_family;
+ u_short si_port;
+ u_int32_t si_scope_id;
+};
+
+static const struct afd {
+ int a_af;
+ int a_addrlen;
+ int a_socklen;
+ int a_off;
+ const char *a_addrany;
+ const char *a_loopback;
+ int a_scoped;
+} afdl [] = {
+#ifdef INET6
+ {PF_INET6, sizeof(struct in6_addr),
+ sizeof(struct sockaddr_in6),
+ offsetof(struct sockaddr_in6, sin6_addr),
+ in6_addrany, in6_loopback, 1},
+#endif
+ {PF_INET, sizeof(struct in_addr),
+ sizeof(struct sockaddr_in),
+ offsetof(struct sockaddr_in, sin_addr),
+ in_addrany, in_loopback, 0},
+ {0, 0, 0, 0, NULL, NULL, 0},
+};
+
+struct explore {
+ int e_af;
+ int e_socktype;
+ int e_protocol;
+ const char *e_protostr;
+ int e_wild;
+#define WILD_AF(ex) ((ex)->e_wild & 0x01)
+#define WILD_SOCKTYPE(ex) ((ex)->e_wild & 0x02)
+#define WILD_PROTOCOL(ex) ((ex)->e_wild & 0x04)
+};
+
+static const struct explore explore[] = {
+#if 0
+ { PF_LOCAL, 0, ANY, ANY, NULL, 0x01 },
+#endif
+#ifdef INET6
+ { PF_INET6, SOCK_DGRAM, IPPROTO_UDP, "udp", 0x07 },
+ { PF_INET6, SOCK_STREAM, IPPROTO_TCP, "tcp", 0x07 },
+ { PF_INET6, SOCK_RAW, ANY, NULL, 0x05 },
+#endif
+ { PF_INET, SOCK_DGRAM, IPPROTO_UDP, "udp", 0x07 },
+ { PF_INET, SOCK_STREAM, IPPROTO_TCP, "tcp", 0x07 },
+ { PF_INET, SOCK_RAW, ANY, NULL, 0x05 },
+ { -1, 0, 0, NULL, 0 },
+};
+
+#ifdef INET6
+#define PTON_MAX 16
+#else
+#define PTON_MAX 4
+#endif
+
+
+static int str_isnumber __P((const char *));
+static int explore_fqdn __P((const struct addrinfo *, const char *,
+ const char *, struct addrinfo **));
+static int explore_null __P((const struct addrinfo *, const char *,
+ const char *, struct addrinfo **));
+static int explore_numeric __P((const struct addrinfo *, const char *,
+ const char *, struct addrinfo **));
+static int explore_numeric_scope __P((const struct addrinfo *, const char *,
+ const char *, struct addrinfo **));
+static int get_name __P((const char *, const struct afd *, struct addrinfo **,
+ char *, const struct addrinfo *, const char *));
+static int get_canonname __P((const struct addrinfo *,
+ struct addrinfo *, const char *));
+static struct addrinfo *get_ai __P((const struct addrinfo *,
+ const struct afd *, const char *));
+static int get_portmatch __P((const struct addrinfo *, const char *));
+static int get_port __P((struct addrinfo *, const char *, int));
+static const struct afd *find_afd __P((int));
+
+static char *ai_errlist[] = {
+ "Success",
+ "Address family for hostname not supported", /* EAI_ADDRFAMILY */
+ "Temporary failure in name resolution", /* EAI_AGAIN */
+ "Invalid value for ai_flags", /* EAI_BADFLAGS */
+ "Non-recoverable failure in name resolution", /* EAI_FAIL */
+ "ai_family not supported", /* EAI_FAMILY */
+ "Memory allocation failure", /* EAI_MEMORY */
+ "No address associated with hostname", /* EAI_NODATA */
+ "hostname nor servname provided, or not known", /* EAI_NONAME */
+ "servname not supported for ai_socktype", /* EAI_SERVICE */
+ "ai_socktype not supported", /* EAI_SOCKTYPE */
+ "System error returned in errno", /* EAI_SYSTEM */
+ "Invalid value for hints", /* EAI_BADHINTS */
+ "Resolved protocol is unknown", /* EAI_PROTOCOL */
+ "Unknown error", /* EAI_MAX */
+};
+
+/* XXX macros that make external reference is BAD. */
+
+#define GET_AI(ai, afd, addr) \
+do { \
+ /* external reference: pai, error, and label free */ \
+ (ai) = get_ai(pai, (afd), (addr)); \
+ if ((ai) == NULL) { \
+ error = EAI_MEMORY; \
+ goto free; \
+ } \
+} while (0)
+
+#define GET_PORT(ai, serv) \
+do { \
+ /* external reference: error and label free */ \
+ error = get_port((ai), (serv), 0); \
+ if (error != 0) \
+ goto free; \
+} while (0)
+
+#define GET_CANONNAME(ai, str) \
+do { \
+ /* external reference: pai, error and label free */ \
+ error = get_canonname(pai, (ai), (str)); \
+ if (error != 0) \
+ goto free; \
+} while (0)
+
+#define ERR(err) \
+do { \
+ /* external reference: error, and label bad */ \
+ error = (err); \
+ goto bad; \
+} while (0)
+
+#define MATCH_FAMILY(x, y, w) \
+ ((x) == (y) || ((w) && ((x) == PF_UNSPEC || (y) == PF_UNSPEC)))
+#define MATCH(x, y, w) \
+ ((x) == (y) || ((w) && ((x) == ANY || (y) == ANY)))
+
+#if defined(DEFINE_ADDITIONAL_IPV6_STUFF)
+char *
+gai_strerror(ecode)
+ int ecode;
+{
+ if (ecode < 0 || ecode > EAI_MAX)
+ ecode = EAI_MAX;
+ return ai_errlist[ecode];
+}
+#endif
+
+void
+freeaddrinfo(ai)
+ struct addrinfo *ai;
+{
+ struct addrinfo *next;
+
+ do {
+ next = ai->ai_next;
+ if (ai->ai_canonname)
+ free(ai->ai_canonname);
+ /* no need to free(ai->ai_addr) */
+ free(ai);
+ } while ((ai = next) != NULL);
+}
+
+static int
+str_isnumber(p)
+ const char *p;
+{
+ char *q = (char *)p;
+ while (*q) {
+ if (! isdigit(*q))
+ return NO;
+ q++;
+ }
+ return YES;
+}
+
+int
+getaddrinfo(hostname, servname, hints, res)
+ const char *hostname, *servname;
+ const struct addrinfo *hints;
+ struct addrinfo **res;
+{
+ struct addrinfo sentinel;
+ struct addrinfo *cur;
+ int error = 0;
+ struct addrinfo ai;
+ struct addrinfo ai0;
+ struct addrinfo *pai;
+ const struct afd *afd;
+ const struct explore *ex;
+
+#ifdef FAITH
+ static int firsttime = 1;
+
+ if (firsttime) {
+ /* translator hack */
+ char *q = getenv("GAI");
+ if (q && inet_pton(AF_INET6, q, &faith_prefix) == 1)
+ translate = YES;
+ firsttime = 0;
+ }
+#endif
+
+ sentinel.ai_next = NULL;
+ cur = &sentinel;
+ pai = &ai;
+ pai->ai_flags = 0;
+ pai->ai_family = PF_UNSPEC;
+ pai->ai_socktype = ANY;
+ pai->ai_protocol = ANY;
+ pai->ai_addrlen = 0;
+ pai->ai_canonname = NULL;
+ pai->ai_addr = NULL;
+ pai->ai_next = NULL;
+
+ if (hostname == NULL && servname == NULL)
+ return EAI_NONAME;
+ if (hints) {
+ /* error check for hints */
+ if (hints->ai_addrlen || hints->ai_canonname ||
+ hints->ai_addr || hints->ai_next)
+ ERR(EAI_BADHINTS); /* xxx */
+ if (hints->ai_flags & ~AI_MASK)
+ ERR(EAI_BADFLAGS);
+ switch (hints->ai_family) {
+ case PF_UNSPEC:
+ case PF_INET:
+#ifdef INET6
+ case PF_INET6:
+#endif
+ break;
+ default:
+ ERR(EAI_FAMILY);
+ }
+ memcpy(pai, hints, sizeof(*pai));
+
+ /*
+ * if both socktype/protocol are specified, check if they
+ * are meaningful combination.
+ */
+ if (pai->ai_socktype != ANY && pai->ai_protocol != ANY) {
+ for (ex = explore; ex->e_af >= 0; ex++) {
+ if (pai->ai_family != ex->e_af)
+ continue;
+ if (ex->e_socktype == ANY)
+ continue;
+ if (ex->e_protocol == ANY)
+ continue;
+ if (pai->ai_socktype == ex->e_socktype
+ && pai->ai_protocol != ex->e_protocol) {
+ ERR(EAI_BADHINTS);
+ }
+ }
+ }
+ }
+
+ /*
+ * check for special cases. (1) numeric servname is disallowed if
+ * socktype/protocol are left unspecified. (2) servname is disallowed
+ * for raw and other inet{,6} sockets.
+ */
+ if (MATCH_FAMILY(pai->ai_family, PF_INET, 1)
+#ifdef PF_INET6
+ || MATCH_FAMILY(pai->ai_family, PF_INET6, 1)
+#endif
+ ) {
+ ai0 = *pai;
+
+ if (pai->ai_family == PF_UNSPEC) {
+#ifdef PF_INET6
+ pai->ai_family = PF_INET6;
+#else
+ pai->ai_family = PF_INET;
+#endif
+ }
+ error = get_portmatch(pai, servname);
+ if (error)
+ ERR(error);
+
+ *pai = ai0;
+ }
+
+ ai0 = *pai;
+
+ /* NULL hostname, or numeric hostname */
+ for (ex = explore; ex->e_af >= 0; ex++) {
+ *pai = ai0;
+
+ if (!MATCH_FAMILY(pai->ai_family, ex->e_af, WILD_AF(ex)))
+ continue;
+ if (!MATCH(pai->ai_socktype, ex->e_socktype, WILD_SOCKTYPE(ex)))
+ continue;
+ if (!MATCH(pai->ai_protocol, ex->e_protocol, WILD_PROTOCOL(ex)))
+ continue;
+
+ if (pai->ai_family == PF_UNSPEC)
+ pai->ai_family = ex->e_af;
+ if (pai->ai_socktype == ANY && ex->e_socktype != ANY)
+ pai->ai_socktype = ex->e_socktype;
+ if (pai->ai_protocol == ANY && ex->e_protocol != ANY)
+ pai->ai_protocol = ex->e_protocol;
+
+ if (hostname == NULL)
+ error = explore_null(pai, hostname, servname, &cur->ai_next);
+ else
+ error = explore_numeric_scope(pai, hostname, servname, &cur->ai_next);
+
+ if (error)
+ goto free;
+
+ while (cur && cur->ai_next)
+ cur = cur->ai_next;
+ }
+
+ /*
+ * XXX
+ * If numreic representation of AF1 can be interpreted as FQDN
+ * representation of AF2, we need to think again about the code below.
+ */
+ if (sentinel.ai_next)
+ goto good;
+
+ if (pai->ai_flags & AI_NUMERICHOST)
+ ERR(EAI_NONAME);
+ if (hostname == NULL)
+ ERR(EAI_NONAME);
+
+ /*
+ * hostname as alphabetical name.
+ * we would like to prefer AF_INET6 than AF_INET, so we'll make a
+ * outer loop by AFs.
+ */
+ for (afd = afdl; afd->a_af; afd++) {
+ *pai = ai0;
+
+ if (!MATCH_FAMILY(pai->ai_family, afd->a_af, 1))
+ continue;
+
+ for (ex = explore; ex->e_af >= 0; ex++) {
+ *pai = ai0;
+
+ if (pai->ai_family == PF_UNSPEC)
+ pai->ai_family = afd->a_af;
+
+ if (!MATCH_FAMILY(pai->ai_family, ex->e_af, WILD_AF(ex)))
+ continue;
+ if (!MATCH(pai->ai_socktype, ex->e_socktype,
+ WILD_SOCKTYPE(ex))) {
+ continue;
+ }
+ if (!MATCH(pai->ai_protocol, ex->e_protocol,
+ WILD_PROTOCOL(ex))) {
+ continue;
+ }
+
+ if (pai->ai_family == PF_UNSPEC)
+ pai->ai_family = ex->e_af;
+ if (pai->ai_socktype == ANY && ex->e_socktype != ANY)
+ pai->ai_socktype = ex->e_socktype;
+ if (pai->ai_protocol == ANY && ex->e_protocol != ANY)
+ pai->ai_protocol = ex->e_protocol;
+
+ error = explore_fqdn(pai, hostname, servname,
+ &cur->ai_next);
+
+ while (cur && cur->ai_next)
+ cur = cur->ai_next;
+ }
+ }
+
+ /* XXX */
+ if (sentinel.ai_next)
+ error = 0;
+
+ if (error)
+ goto free;
+ if (error == 0) {
+ if (sentinel.ai_next) {
+ good:
+ *res = sentinel.ai_next;
+ return SUCCESS;
+ } else
+ error = EAI_FAIL;
+ }
+ free:
+ bad:
+ if (sentinel.ai_next)
+ freeaddrinfo(sentinel.ai_next);
+ *res = NULL;
+ return error;
+}
+
+/*
+ * FQDN hostname, DNS lookup
+ */
+static int
+explore_fqdn(pai, hostname, servname, res)
+ const struct addrinfo *pai;
+ const char *hostname;
+ const char *servname;
+ struct addrinfo **res;
+{
+ struct hostent *hp;
+ int h_error;
+ int af;
+ char **aplist = NULL, *apbuf = NULL;
+ char *ap;
+ struct addrinfo sentinel, *cur;
+ int i;
+#ifndef USE_GETIPNODEBY
+ int naddrs;
+#endif
+ const struct afd *afd;
+ int error;
+
+ *res = NULL;
+ sentinel.ai_next = NULL;
+ cur = &sentinel;
+
+ /*
+ * Do not filter unsupported AFs here. We need to honor content of
+ * databases (/etc/hosts, DNS and others). Otherwise we cannot
+ * replace gethostbyname() by getaddrinfo().
+ */
+
+ /*
+ * if the servname does not match socktype/protocol, ignore it.
+ */
+ if (get_portmatch(pai, servname) != 0)
+ return 0;
+
+ afd = find_afd(pai->ai_family);
+
+ /*
+ * post-RFC2553: should look at (pai->ai_flags & AI_ADDRCONFIG)
+ * rather than hardcoding it. we may need to add AI_ADDRCONFIG
+ * handling code by ourselves in case we don't have getipnodebyname().
+ */
+#ifdef USE_GETIPNODEBY
+ hp = getipnodebyname(hostname, pai->ai_family, AI_ADDRCONFIG, &h_error);
+#else
+#ifdef HAVE_GETHOSTBYNAME2
+ hp = gethostbyname2(hostname, pai->ai_family);
+#else
+ if (pai->ai_family != AF_INET)
+ return 0;
+ hp = gethostbyname(hostname);
+#ifdef HAVE_H_ERRNO
+ h_error = h_errno;
+#else
+ h_error = EINVAL;
+#endif
+#endif /*HAVE_GETHOSTBYNAME2*/
+#endif /*USE_GETIPNODEBY*/
+
+ if (hp == NULL) {
+ switch (h_error) {
+ case HOST_NOT_FOUND:
+ case NO_DATA:
+ error = EAI_NODATA;
+ break;
+ case TRY_AGAIN:
+ error = EAI_AGAIN;
+ break;
+ case NO_RECOVERY:
+ case NETDB_INTERNAL:
+ default:
+ error = EAI_FAIL;
+ break;
+ }
+ } else if ((hp->h_name == NULL) || (hp->h_name[0] == 0)
+ || (hp->h_addr_list[0] == NULL)) {
+#ifdef USE_GETIPNODEBY
+ freehostent(hp);
+#endif
+ hp = NULL;
+ error = EAI_FAIL;
+ }
+
+ if (hp == NULL)
+ goto free;
+
+#ifdef USE_GETIPNODEBY
+ aplist = hp->h_addr_list;
+#else
+ /*
+ * hp will be overwritten if we use gethostbyname2().
+ * always deep copy for simplification.
+ */
+ for (naddrs = 0; hp->h_addr_list[naddrs] != NULL; naddrs++)
+ ;
+ naddrs++;
+ aplist = (char **)malloc(sizeof(aplist[0]) * naddrs);
+ apbuf = (char *)malloc(hp->h_length * naddrs);
+ if (aplist == NULL || apbuf == NULL) {
+ error = EAI_MEMORY;
+ goto free;
+ }
+ memset(aplist, 0, sizeof(aplist[0]) * naddrs);
+ for (i = 0; i < naddrs; i++) {
+ if (hp->h_addr_list[i] == NULL) {
+ aplist[i] = NULL;
+ continue;
+ }
+ memcpy(&apbuf[i * hp->h_length], hp->h_addr_list[i],
+ hp->h_length);
+ aplist[i] = &apbuf[i * hp->h_length];
+ }
+#endif
+
+ for (i = 0; aplist[i] != NULL; i++) {
+ af = hp->h_addrtype;
+ ap = aplist[i];
+#ifdef AF_INET6
+ if (af == AF_INET6
+ && IN6_IS_ADDR_V4MAPPED((struct in6_addr *)ap)) {
+ af = AF_INET;
+ ap = ap + sizeof(struct in6_addr)
+ - sizeof(struct in_addr);
+ }
+#endif
+
+ if (af != pai->ai_family)
+ continue;
+
+ if ((pai->ai_flags & AI_CANONNAME) == 0) {
+ GET_AI(cur->ai_next, afd, ap);
+ GET_PORT(cur->ai_next, servname);
+ } else {
+ /*
+ * if AI_CANONNAME and if reverse lookup
+ * fail, return ai anyway to pacify
+ * calling application.
+ *
+ * XXX getaddrinfo() is a name->address
+ * translation function, and it looks
+ * strange that we do addr->name
+ * translation here.
+ */
+ get_name(ap, afd, &cur->ai_next,
+ ap, pai, servname);
+ }
+
+ while (cur && cur->ai_next)
+ cur = cur->ai_next;
+ }
+
+ *res = sentinel.ai_next;
+ return 0;
+
+free:
+#ifdef USE_GETIPNODEBY
+ if (hp)
+ freehostent(hp);
+#endif
+ if (aplist)
+ free(aplist);
+ if (apbuf)
+ free(apbuf);
+ if (sentinel.ai_next)
+ freeaddrinfo(sentinel.ai_next);
+ return error;
+}
+
+/*
+ * hostname == NULL.
+ * passive socket -> anyaddr (0.0.0.0 or ::)
+ * non-passive socket -> localhost (127.0.0.1 or ::1)
+ */
+static int
+explore_null(pai, hostname, servname, res)
+ const struct addrinfo *pai;
+ const char *hostname;
+ const char *servname;
+ struct addrinfo **res;
+{
+ int s;
+ const struct afd *afd;
+ struct addrinfo *cur;
+ struct addrinfo sentinel;
+ int error;
+
+ *res = NULL;
+ sentinel.ai_next = NULL;
+ cur = &sentinel;
+
+ /*
+ * filter out AFs that are not supported by the kernel
+ * XXX errno?
+ */
+ s = socket(pai->ai_family, SOCK_DGRAM, 0);
+ if (s < 0) {
+ if (errno != EMFILE)
+ return 0;
+ } else
+ close(s);
+
+ /*
+ * if the servname does not match socktype/protocol, ignore it.
+ */
+ if (get_portmatch(pai, servname) != 0)
+ return 0;
+
+ afd = find_afd(pai->ai_family);
+
+ if (pai->ai_flags & AI_PASSIVE) {
+ GET_AI(cur->ai_next, afd, afd->a_addrany);
+ /* xxx meaningless?
+ * GET_CANONNAME(cur->ai_next, "anyaddr");
+ */
+ GET_PORT(cur->ai_next, servname);
+ } else {
+ GET_AI(cur->ai_next, afd, afd->a_loopback);
+ /* xxx meaningless?
+ * GET_CANONNAME(cur->ai_next, "localhost");
+ */
+ GET_PORT(cur->ai_next, servname);
+ }
+ cur = cur->ai_next;
+
+ *res = sentinel.ai_next;
+ return 0;
+
+free:
+ if (sentinel.ai_next)
+ freeaddrinfo(sentinel.ai_next);
+ return error;
+}
+
+/*
+ * numeric hostname
+ */
+static int
+explore_numeric(pai, hostname, servname, res)
+ const struct addrinfo *pai;
+ const char *hostname;
+ const char *servname;
+ struct addrinfo **res;
+{
+ const struct afd *afd;
+ struct addrinfo *cur;
+ struct addrinfo sentinel;
+ int error;
+ char pton[PTON_MAX];
+ int flags;
+
+ *res = NULL;
+ sentinel.ai_next = NULL;
+ cur = &sentinel;
+
+ /*
+ * if the servname does not match socktype/protocol, ignore it.
+ */
+ if (get_portmatch(pai, servname) != 0)
+ return 0;
+
+ afd = find_afd(pai->ai_family);
+ flags = pai->ai_flags;
+
+ if (inet_pton(afd->a_af, hostname, pton) == 1) {
+ u_int32_t v4a;
+#ifdef INET6
+ u_char pfx;
+#endif
+
+ switch (afd->a_af) {
+ case AF_INET:
+ v4a = (u_int32_t)ntohl(((struct in_addr *)pton)->s_addr);
+ if (IN_MULTICAST(v4a) || IN_EXPERIMENTAL(v4a))
+ flags &= ~AI_CANONNAME;
+ v4a >>= IN_CLASSA_NSHIFT;
+ if (v4a == 0 || v4a == IN_LOOPBACKNET)
+ flags &= ~AI_CANONNAME;
+ break;
+#ifdef INET6
+ case AF_INET6:
+ pfx = ((struct in6_addr *)pton)->s6_addr[0];
+ if (pfx == 0 || pfx == 0xfe || pfx == 0xff)
+ flags &= ~AI_CANONNAME;
+ break;
+#endif
+ }
+
+ if (pai->ai_family == afd->a_af ||
+ pai->ai_family == PF_UNSPEC /*?*/) {
+ if ((flags & AI_CANONNAME) == 0) {
+ GET_AI(cur->ai_next, afd, pton);
+ GET_PORT(cur->ai_next, servname);
+ } else {
+ /*
+ * if AI_CANONNAME and if reverse lookup
+ * fail, return ai anyway to pacify
+ * calling application.
+ *
+ * XXX getaddrinfo() is a name->address
+ * translation function, and it looks
+ * strange that we do addr->name
+ * translation here.
+ */
+ get_name(pton, afd, &cur->ai_next,
+ pton, pai, servname);
+ }
+ while (cur && cur->ai_next)
+ cur = cur->ai_next;
+ } else
+ ERR(EAI_FAMILY); /*xxx*/
+ }
+
+ *res = sentinel.ai_next;
+ return 0;
+
+free:
+bad:
+ if (sentinel.ai_next)
+ freeaddrinfo(sentinel.ai_next);
+ return error;
+}
+
+/*
+ * numeric hostname with scope
+ */
+static int
+explore_numeric_scope(pai, hostname, servname, res)
+ const struct addrinfo *pai;
+ const char *hostname;
+ const char *servname;
+ struct addrinfo **res;
+{
+#ifndef SCOPE_DELIMITER
+ return explore_numeric(pai, hostname, servname, res);
+#else
+ const struct afd *afd;
+ struct addrinfo *cur;
+ int error;
+ char *cp, *hostname2 = NULL;
+ int scope;
+ struct sockaddr_in6 *sin6;
+
+ /*
+ * if the servname does not match socktype/protocol, ignore it.
+ */
+ if (get_portmatch(pai, servname) != 0)
+ return 0;
+
+ afd = find_afd(pai->ai_family);
+ if (!afd->a_scoped)
+ return explore_numeric(pai, hostname, servname, res);
+
+ cp = strchr(hostname, SCOPE_DELIMITER);
+ if (cp == NULL)
+ return explore_numeric(pai, hostname, servname, res);
+
+ /*
+ * Handle special case of <scoped_address><delimiter><scope id>
+ */
+ hostname2 = strdup(hostname);
+ if (hostname2 == NULL)
+ return EAI_MEMORY;
+ /* terminate at the delimiter */
+ hostname2[cp - hostname] = '\0';
+
+ cp++;
+ switch (pai->ai_family) {
+#ifdef INET6
+ case AF_INET6:
+ scope = if_nametoindex(cp);
+ if (scope == 0) {
+ free(hostname2);
+ return (EAI_NONAME);
+ }
+ break;
+#endif
+ }
+
+ error = explore_numeric(pai, hostname2, servname, res);
+ if (error == 0) {
+ for (cur = *res; cur; cur = cur->ai_next) {
+ if (cur->ai_family != AF_INET6)
+ continue;
+ sin6 = (struct sockaddr_in6 *)cur->ai_addr;
+ if (IN6_IS_ADDR_LINKLOCAL(&sin6->sin6_addr) ||
+ IN6_IS_ADDR_MC_LINKLOCAL(&sin6->sin6_addr))
+ sin6->sin6_scope_id = scope;
+ }
+ }
+
+ free(hostname2);
+
+ return error;
+#endif
+}
+
+static int
+get_name(addr, afd, res, numaddr, pai, servname)
+ const char *addr;
+ const struct afd *afd;
+ struct addrinfo **res;
+ char *numaddr;
+ const struct addrinfo *pai;
+ const char *servname;
+{
+ struct hostent *hp = NULL;
+ struct addrinfo *cur = NULL;
+ int error = 0;
+ char *ap = NULL, *cn = NULL;
+#ifdef USE_GETIPNODEBY
+ int h_error;
+
+ hp = getipnodebyaddr(addr, afd->a_addrlen, afd->a_af, &h_error);
+#else
+ hp = gethostbyaddr(addr, afd->a_addrlen, afd->a_af);
+#endif
+ if (hp && hp->h_name && hp->h_name[0] && hp->h_addr_list[0]) {
+#ifdef USE_GETIPNODEBY
+ GET_AI(cur, afd, hp->h_addr_list[0]);
+ GET_PORT(cur, servname);
+ GET_CANONNAME(cur, hp->h_name);
+#else
+ /* hp will be damaged if we use gethostbyaddr() */
+ if ((ap = (char *)malloc(hp->h_length)) == NULL) {
+ error = EAI_MEMORY;
+ goto free;
+ }
+ memcpy(ap, hp->h_addr_list[0], hp->h_length);
+ if ((cn = strdup(hp->h_name)) == NULL) {
+ error = EAI_MEMORY;
+ goto free;
+ }
+
+ GET_AI(cur, afd, ap);
+ GET_PORT(cur, servname);
+ GET_CANONNAME(cur, cn);
+ free(ap); ap = NULL;
+ free(cn); cn = NULL;
+#endif
+ } else {
+ GET_AI(cur, afd, numaddr);
+ GET_PORT(cur, servname);
+ }
+
+#ifdef USE_GETIPNODEBY
+ if (hp)
+ freehostent(hp);
+#endif
+ *res = cur;
+ return SUCCESS;
+ free:
+ if (cur)
+ freeaddrinfo(cur);
+ if (ap)
+ free(ap);
+ if (cn)
+ free(cn);
+#ifdef USE_GETIPNODEBY
+ if (hp)
+ freehostent(hp);
+#endif
+ *res = NULL;
+ return error;
+}
+
+static int
+get_canonname(pai, ai, str)
+ const struct addrinfo *pai;
+ struct addrinfo *ai;
+ const char *str;
+{
+ if ((pai->ai_flags & AI_CANONNAME) != 0) {
+ ai->ai_canonname = strdup(str);
+ if (ai->ai_canonname == NULL)
+ return EAI_MEMORY;
+ }
+ return 0;
+}
+
+static struct addrinfo *
+get_ai(pai, afd, addr)
+ const struct addrinfo *pai;
+ const struct afd *afd;
+ const char *addr;
+{
+ char *p;
+ struct addrinfo *ai;
+
+ ai = (struct addrinfo *)malloc(sizeof(struct addrinfo)
+ + (afd->a_socklen));
+ if (ai == NULL)
+ return NULL;
+
+ memcpy(ai, pai, sizeof(struct addrinfo));
+ ai->ai_addr = (struct sockaddr *)(ai + 1);
+ memset(ai->ai_addr, 0, afd->a_socklen);
+#ifdef HAVE_SOCKADDR_SA_LEN
+ ai->ai_addr->sa_len = afd->a_socklen;
+#endif
+ ai->ai_addrlen = afd->a_socklen;
+ ai->ai_addr->sa_family = ai->ai_family = afd->a_af;
+ p = (char *)(ai->ai_addr);
+ memcpy(p + afd->a_off, addr, afd->a_addrlen);
+ return ai;
+}
+
+static int
+get_portmatch(ai, servname)
+ const struct addrinfo *ai;
+ const char *servname;
+{
+
+ /* get_port does not touch first argument. when matchonly == 1. */
+ return get_port((struct addrinfo *)ai, servname, 1);
+}
+
+static int
+get_port(ai, servname, matchonly)
+ struct addrinfo *ai;
+ const char *servname;
+ int matchonly;
+{
+ const char *proto;
+ struct servent *sp;
+ int port;
+ int allownumeric;
+
+ if (servname == NULL)
+ return 0;
+ switch (ai->ai_family) {
+ case AF_INET:
+#ifdef AF_INET6
+ case AF_INET6:
+#endif
+ break;
+ default:
+ return 0;
+ }
+
+ switch (ai->ai_socktype) {
+ case SOCK_RAW:
+ return EAI_SERVICE;
+ case SOCK_DGRAM:
+ case SOCK_STREAM:
+ allownumeric = 1;
+ break;
+ case ANY:
+ allownumeric = 0;
+ break;
+ default:
+ return EAI_SOCKTYPE;
+ }
+
+ if (str_isnumber(servname)) {
+ if (!allownumeric)
+ return EAI_SERVICE;
+ port = htons(atoi(servname));
+ if (port < 0 || port > 65535)
+ return EAI_SERVICE;
+ } else {
+ switch (ai->ai_socktype) {
+ case SOCK_DGRAM:
+ proto = "udp";
+ break;
+ case SOCK_STREAM:
+ proto = "tcp";
+ break;
+ default:
+ proto = NULL;
+ break;
+ }
+
+ if ((sp = getservbyname(servname, proto)) == NULL)
+ return EAI_SERVICE;
+ port = sp->s_port;
+ }
+
+ if (!matchonly) {
+ switch (ai->ai_family) {
+ case AF_INET:
+ ((struct sockaddr_in *)ai->ai_addr)->sin_port = port;
+ break;
+#ifdef INET6
+ case AF_INET6:
+ ((struct sockaddr_in6 *)ai->ai_addr)->sin6_port = port;
+ break;
+#endif
+ }
+ }
+
+ return 0;
+}
+
+static const struct afd *
+find_afd(af)
+ int af;
+{
+ const struct afd *afd;
+
+ if (af == PF_UNSPEC)
+ return NULL;
+ for (afd = afdl; afd->a_af; afd++) {
+ if (afd->a_af == af)
+ return afd;
+ }
+ return NULL;
+}
+
+
+#endif /*__MING64__*/
diff --git a/libpcap-1.3.0/Win32/Src/getnetbynm.c b/libpcap-1.3.0/Win32/Src/getnetbynm.c
new file mode 100644
index 0000000..fa4d398
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/getnetbynm.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 1983 Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by the University of California, Berkeley. The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#if defined(LIBC_SCCS) && !defined(lint)
+static char sccsid[] = "@(#)getnetbyname.c 5.5 (Berkeley) 6/27/88";
+#endif /* LIBC_SCCS and not lint */
+
+#include "inetprivate.h"
+
+extern int _net_stayopen;
+
+struct netent *
+getnetbyname(const char *name)
+{
+ register struct netent *p;
+ register char **cp;
+
+ setnetent(_net_stayopen);
+ while (p = getnetent()) {
+ if (strcmp(p->n_name, name) == 0)
+ break;
+ for (cp = p->n_aliases; *cp != 0; cp++)
+ if (strcmp(*cp, name) == 0)
+ goto found;
+ }
+found:
+ if (!_net_stayopen)
+ endnetent();
+ return (p);
+}
diff --git a/libpcap-1.3.0/Win32/Src/getnetent.c b/libpcap-1.3.0/Win32/Src/getnetent.c
new file mode 100644
index 0000000..d4cceb3
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/getnetent.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 1983 Regents of the University of California.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are permitted
+ * provided that the above copyright notice and this paragraph are
+ * duplicated in all such forms and that any documentation,
+ * advertising materials, and other materials related to such
+ * distribution and use acknowledge that the software was developed
+ * by the University of California, Berkeley. The name of the
+ * University may not be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#if defined(LIBC_SCCS) && !defined(lint)
+static char sccsid[] = "@(#)getnetent.c 5.5 (Berkeley) 6/27/88";
+#endif /* LIBC_SCCS and not lint */
+
+#include "inetprivate.h"
+
+#define MAXALIASES 35
+
+static char NETDB[] = _PATH_NETWORKS;
+static FILE *netf = NULL;
+static char line[BUFSIZ+1];
+static struct netent net;
+static char *net_aliases[MAXALIASES];
+static char *any(char *, char *);
+
+int _net_stayopen;
+extern u_int32_t inet_network(const char *cp);
+
+void
+setnetent(f)
+ int f;
+{
+ if (netf == NULL)
+ netf = fopen(NETDB, "r" );
+ else
+ rewind(netf);
+ _net_stayopen |= f;
+}
+
+void
+endnetent()
+{
+ if (netf) {
+ fclose(netf);
+ netf = NULL;
+ }
+ _net_stayopen = 0;
+}
+
+struct netent *
+getnetent()
+{
+ char *p;
+ register char *cp, **q;
+
+ if (netf == NULL && (netf = fopen(NETDB, "r" )) == NULL)
+ return (NULL);
+again:
+ p = fgets(line, BUFSIZ, netf);
+ if (p == NULL)
+ return (NULL);
+ if (*p == '#')
+ goto again;
+ cp = any(p, "#\n");
+ if (cp == NULL)
+ goto again;
+ *cp = '\0';
+ net.n_name = p;
+ cp = any(p, " \t");
+ if (cp == NULL)
+ goto again;
+ *cp++ = '\0';
+ while (*cp == ' ' || *cp == '\t')
+ cp++;
+ p = any(cp, " \t");
+ if (p != NULL)
+ *p++ = '\0';
+ net.n_net = inet_network(cp);
+ net.n_addrtype = AF_INET;
+ q = net.n_aliases = net_aliases;
+ if (p != NULL)
+ cp = p;
+ while (cp && *cp) {
+ if (*cp == ' ' || *cp == '\t') {
+ cp++;
+ continue;
+ }
+ if (q < &net_aliases[MAXALIASES - 1])
+ *q++ = cp;
+ cp = any(cp, " \t");
+ if (cp != NULL)
+ *cp++ = '\0';
+ }
+ *q = NULL;
+ return (&net);
+}
+
+static char *
+any(cp, match)
+ register char *cp;
+ char *match;
+{
+ register char *mp, c;
+
+ while (c = *cp) {
+ for (mp = match; *mp; mp++)
+ if (*mp == c)
+ return (cp);
+ cp++;
+ }
+ return ((char *)0);
+}
diff --git a/libpcap-1.3.0/Win32/Src/getopt.c b/libpcap-1.3.0/Win32/Src/getopt.c
new file mode 100644
index 0000000..03c2086
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/getopt.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 1987, 1993, 1994
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#if defined(LIBC_SCCS) && !defined(lint)
+static char sccsid[] = "@(#)getopt.c 8.3 (Berkeley) 4/27/95";
+#endif /* LIBC_SCCS and not lint */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+int opterr = 1, /* if error message should be printed */
+ optind = 1, /* index into parent argv vector */
+ optopt, /* character checked for validity */
+ optreset; /* reset getopt */
+char *optarg; /* argument associated with option */
+
+#define BADCH (int)'?'
+#define BADARG (int)':'
+#define EMSG ""
+
+/*
+ * getopt --
+ * Parse argc/argv argument vector.
+ */
+int
+getopt(nargc, nargv, ostr)
+ int nargc;
+ char * const *nargv;
+ const char *ostr;
+{
+#ifdef WIN32
+ char *__progname="windump";
+#else
+ extern char *__progname;
+#endif
+ static char *place = EMSG; /* option letter processing */
+ char *oli; /* option letter list index */
+
+ if (optreset || !*place) { /* update scanning pointer */
+ optreset = 0;
+ if (optind >= nargc || *(place = nargv[optind]) != '-') {
+ place = EMSG;
+ return (-1);
+ }
+ if (place[1] && *++place == '-') { /* found "--" */
+ ++optind;
+ place = EMSG;
+ return (-1);
+ }
+ } /* option letter okay? */
+ if ((optopt = (int)*place++) == (int)':' ||
+ !(oli = strchr(ostr, optopt))) {
+ /*
+ * if the user didn't specify '-' as an option,
+ * assume it means -1.
+ */
+ if (optopt == (int)'-')
+ return (-1);
+ if (!*place)
+ ++optind;
+ if (opterr && *ostr != ':')
+ (void)fprintf(stderr,
+ "%s: illegal option -- %c\n", __progname, optopt);
+ return (BADCH);
+ }
+ if (*++oli != ':') { /* don't need argument */
+ optarg = NULL;
+ if (!*place)
+ ++optind;
+ }
+ else { /* need an argument */
+ if (*place) /* no white space */
+ optarg = place;
+ else if (nargc <= ++optind) { /* no arg */
+ place = EMSG;
+ if (*ostr == ':')
+ return (BADARG);
+ if (opterr)
+ (void)fprintf(stderr,
+ "%s: option requires an argument -- %c\n",
+ __progname, optopt);
+ return (BADCH);
+ }
+ else /* white space */
+ optarg = nargv[optind];
+ place = EMSG;
+ ++optind;
+ }
+ return (optopt); /* dump back option letter */
+}
diff --git a/libpcap-1.3.0/Win32/Src/getservent.c b/libpcap-1.3.0/Win32/Src/getservent.c
new file mode 100644
index 0000000..61b8cb0
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/getservent.c
@@ -0,0 +1,125 @@
+/*
+ * Copyright (c) 1983, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#if defined(LIBC_SCCS) && !defined(lint)
+static char sccsid[] = "@(#)getservent.c 8.1 (Berkeley) 6/4/93";
+#endif /* LIBC_SCCS and not lint */
+
+#include <sys/types.h>
+#include <string.h>
+
+#include <stdlib.h>
+#include <ctype.h>
+#include <net/netdb.h>
+#include <stdio.h>
+#include <errno.h>
+#include <arpa/nameser.h>
+
+#define MAXALIASES 35
+
+static char SERVDB[] = _PATH_SERVICES;
+static FILE *servf = NULL;
+static char line[BUFSIZ+1];
+static struct servent serv;
+static char *serv_aliases[MAXALIASES];
+int _serv_stayopen;
+
+void
+setservent(f)
+ int f;
+{
+ if (servf == NULL)
+ servf = fopen(SERVDB, "r" );
+ else
+ rewind(servf);
+ _serv_stayopen |= f;
+}
+
+void
+endservent()
+{
+ if (servf) {
+ fclose(servf);
+ servf = NULL;
+ }
+ _serv_stayopen = 0;
+}
+
+struct servent *
+getservent()
+{
+ char *p;
+ register char *cp, **q;
+
+ if (servf == NULL && (servf = fopen(SERVDB, "r" )) == NULL)
+ return (NULL);
+again:
+ if ((p = fgets(line, BUFSIZ, servf)) == NULL)
+ return (NULL);
+ if (*p == '#')
+ goto again;
+ cp = strpbrk(p, "#\n");
+ if (cp == NULL)
+ goto again;
+ *cp = '\0';
+ serv.s_name = p;
+ p = strpbrk(p, " \t");
+ if (p == NULL)
+ goto again;
+ *p++ = '\0';
+ while (*p == ' ' || *p == '\t')
+ p++;
+ cp = strpbrk(p, ",/");
+ if (cp == NULL)
+ goto again;
+ *cp++ = '\0';
+ serv.s_port = htons((u_short)atoi(p));
+ serv.s_proto = cp;
+ q = serv.s_aliases = serv_aliases;
+ cp = strpbrk(cp, " \t");
+ if (cp != NULL)
+ *cp++ = '\0';
+ while (cp && *cp) {
+ if (*cp == ' ' || *cp == '\t') {
+ cp++;
+ continue;
+ }
+ if (q < &serv_aliases[MAXALIASES - 1])
+ *q++ = cp;
+ cp = strpbrk(cp, " \t");
+ if (cp != NULL)
+ *cp++ = '\0';
+ }
+ *q = NULL;
+ return (&serv);
+}
diff --git a/libpcap-1.3.0/Win32/Src/inet_aton.c b/libpcap-1.3.0/Win32/Src/inet_aton.c
new file mode 100644
index 0000000..3da6667
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/inet_aton.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 1995, 1996, 1997 Kungliga Tekniska Högskolan
+ * (Royal Institute of Technology, Stockholm, Sweden).
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the Kungliga Tekniska
+ * Högskolan and its contributors.
+ *
+ * 4. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* $Id: inet_aton.c,v 1.2 2003-11-15 23:24:06 guy Exp $ */
+
+#ifndef lint
+static const char rcsid[] _U_ =
+ "@(#) $Header: /tcpdump/master/libpcap/Win32/Src/inet_aton.c,v 1.2 2003-11-15 23:24:06 guy Exp $";
+#endif
+
+#include <sys/types.h>
+#include <pcap-stdinc.h>
+
+/* Minimal implementation of inet_aton.
+ * Cannot distinguish between failure and a local broadcast address. */
+
+#ifndef INADDR_NONE
+#define INADDR_NONE 0xffffffff
+#endif
+
+int
+inet_aton(const char *cp, struct in_addr *addr)
+{
+ addr->s_addr = inet_addr(cp);
+ return (addr->s_addr == INADDR_NONE) ? 0 : 1;
+}
diff --git a/libpcap-1.3.0/Win32/Src/inet_net.c b/libpcap-1.3.0/Win32/Src/inet_net.c
new file mode 100644
index 0000000..5bbe391
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/inet_net.c
@@ -0,0 +1,101 @@
+/*
+ * Copyright (c) 1983, 1993
+ * The Regents of the University of California. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#if defined(LIBC_SCCS) && !defined(lint)
+static char sccsid[] = "@(#)inet_network.c 8.1 (Berkeley) 6/4/93";
+#endif /* LIBC_SCCS and not lint */
+
+#include "inetprivate.h"
+
+/*
+ * Internet network address interpretation routine.
+ * The library routines call this routine to interpret
+ * network numbers.
+ */
+u_int32_t
+inet_network(const char *cp)
+{
+ register u_long val, base, n;
+ register char c;
+ u_long parts[4], *pp = parts;
+ register int i;
+
+again:
+ /*
+ * Collect number up to ``.''.
+ * Values are specified as for C:
+ * 0x=hex, 0=octal, other=decimal.
+ */
+ val = 0; base = 10;
+ /*
+ * The 4.4BSD version of this file also accepts 'x__' as a hexa
+ * number. I don't think this is correct. -- Uli
+ */
+ if (*cp == '0') {
+ if (*++cp == 'x' || *cp == 'X')
+ base = 16, cp++;
+ else
+ base = 8;
+ }
+ while ((c = *cp)) {
+ if (isdigit(c)) {
+ val = (val * base) + (c - '0');
+ cp++;
+ continue;
+ }
+ if (base == 16 && isxdigit(c)) {
+ val = (val << 4) + (c + 10 - (islower(c) ? 'a' : 'A'));
+ cp++;
+ continue;
+ }
+ break;
+ }
+ if (*cp == '.') {
+ if (pp >= parts + 4)
+ return (INADDR_NONE);
+ *pp++ = val, cp++;
+ goto again;
+ }
+ if (*cp && !isspace(*cp))
+ return (INADDR_NONE);
+ *pp++ = val;
+ n = pp - parts;
+ if (n > 4)
+ return (INADDR_NONE);
+ for (val = 0, i = 0; i < (int)n; i++) {
+ val <<= 8;
+ val |= parts[i] & 0xff;
+ }
+ return (val);
+}
diff --git a/libpcap-1.3.0/Win32/Src/inet_pton.c b/libpcap-1.3.0/Win32/Src/inet_pton.c
new file mode 100644
index 0000000..7933a4e
--- /dev/null
+++ b/libpcap-1.3.0/Win32/Src/inet_pton.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 1999 Kungliga Tekniska Högskolan
+ * (Royal Institute of Technology, Stockholm, Sweden).
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the Kungliga Tekniska
+ * Högskolan and its contributors.
+ *
+ * 4. Neither the name of the Institute nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/* $Id: inet_pton.c,v 1.3 2007-09-27 18:02:20 gianluca Exp $ */
+
+#ifndef lint
+static const char rcsid[] _U_ =
+ "@(#) $Header: /tcpdump/master/libpcap/Win32/Src/inet_pton.c,v 1.3 2007-09-27 18:02:20 gianluca Exp $";
+#endif
+
+#include <errno.h>
+
+#ifdef WIN32
+#ifndef EAFNOSUPPORT
+#define EAFNOSUPPORT 97 /* not present in errno.h provided with VC */
+#endif
+#endif
+
+#ifdef __MINGW32__
+int* _errno();
+#define errno (*_errno())
+#endif /* __MINGW32__ */
+
+#include <pcap-stdinc.h>
+
+int inet_aton(const char *cp, struct in_addr *addr);
+
+int
+inet_pton(int af, const char *src, void *dst)
+{
+ if (af != AF_INET) {
+ errno = EAFNOSUPPORT;
+ return -1;
+ }
+ return inet_aton (src, dst);
+}
diff --git a/libpcap-1.3.0/aclocal.m4 b/libpcap-1.3.0/aclocal.m4
new file mode 100644
index 0000000..20db44f
--- /dev/null
+++ b/libpcap-1.3.0/aclocal.m4
@@ -0,0 +1,1037 @@
+dnl @(#) $Header: /tcpdump/master/libpcap/aclocal.m4,v 1.93 2008-11-18 07:29:48 guy Exp $ (LBL)
+dnl
+dnl Copyright (c) 1995, 1996, 1997, 1998
+dnl The Regents of the University of California. All rights reserved.
+dnl
+dnl Redistribution and use in source and binary forms, with or without
+dnl modification, are permitted provided that: (1) source code distributions
+dnl retain the above copyright notice and this paragraph in its entirety, (2)
+dnl distributions including binary code include the above copyright notice and
+dnl this paragraph in its entirety in the documentation or other materials
+dnl provided with the distribution, and (3) all advertising materials mentioning
+dnl features or use of this software display the following acknowledgement:
+dnl ``This product includes software developed by the University of California,
+dnl Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
+dnl the University nor the names of its contributors may be used to endorse
+dnl or promote products derived from this software without specific prior
+dnl written permission.
+dnl THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+dnl WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+dnl MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+dnl
+dnl LBL autoconf macros
+dnl
+
+dnl
+dnl Do whatever AC_LBL_C_INIT work is necessary before using AC_PROG_CC.
+dnl
+dnl It appears that newer versions of autoconf (2.64 and later) will,
+dnl if you use AC_TRY_COMPILE in a macro, stick AC_PROG_CC at the
+dnl beginning of the macro, even if the macro itself calls AC_PROG_CC.
+dnl See the "Prerequisite Macros" and "Expanded Before Required" sections
+dnl in the Autoconf documentation.
+dnl
+dnl This causes a steaming heap of fail in our case, as we were, in
+dnl AC_LBL_C_INIT, doing the tests we now do in AC_LBL_C_INIT_BEFORE_CC,
+dnl calling AC_PROG_CC, and then doing the tests we now do in
+dnl AC_LBL_C_INIT. Now, we run AC_LBL_C_INIT_BEFORE_CC, AC_PROG_CC,
+dnl and AC_LBL_C_INIT at the top level.
+dnl
+AC_DEFUN(AC_LBL_C_INIT_BEFORE_CC,
+ [AC_PREREQ(2.50)
+ AC_BEFORE([$0], [AC_LBL_C_INIT])
+ AC_BEFORE([$0], [AC_PROG_CC])
+ AC_BEFORE([$0], [AC_LBL_FIXINCLUDES])
+ AC_BEFORE([$0], [AC_LBL_DEVEL])
+ AC_ARG_WITH(gcc, [ --without-gcc don't use gcc])
+ $1="-O"
+ $2=""
+ if test "${srcdir}" != "." ; then
+ $2="-I\$(srcdir)"
+ fi
+ if test "${CFLAGS+set}" = set; then
+ LBL_CFLAGS="$CFLAGS"
+ fi
+ if test -z "$CC" ; then
+ case "$host_os" in
+
+ bsdi*)
+ AC_CHECK_PROG(SHLICC2, shlicc2, yes, no)
+ if test $SHLICC2 = yes ; then
+ CC=shlicc2
+ export CC
+ fi
+ ;;
+ esac
+ fi
+ if test -z "$CC" -a "$with_gcc" = no ; then
+ CC=cc
+ export CC
+ fi
+])
+
+dnl
+dnl Determine which compiler we're using (cc or gcc)
+dnl If using gcc, determine the version number
+dnl If using cc, require that it support ansi prototypes
+dnl If using gcc, use -O2 (otherwise use -O)
+dnl If using cc, explicitly specify /usr/local/include
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_C_INIT(copt, incls)
+dnl
+dnl results:
+dnl
+dnl $1 (copt set)
+dnl $2 (incls set)
+dnl CC
+dnl LDFLAGS
+dnl ac_cv_lbl_gcc_vers
+dnl LBL_CFLAGS
+dnl
+AC_DEFUN(AC_LBL_C_INIT,
+ [AC_PREREQ(2.50)
+ AC_BEFORE([$0], [AC_LBL_FIXINCLUDES])
+ AC_BEFORE([$0], [AC_LBL_DEVEL])
+ AC_BEFORE([$0], [AC_LBL_SHLIBS_INIT])
+ if test "$GCC" = yes ; then
+ if test "$SHLICC2" = yes ; then
+ ac_cv_lbl_gcc_vers=2
+ $1="-O2"
+ else
+ AC_MSG_CHECKING(gcc version)
+ AC_CACHE_VAL(ac_cv_lbl_gcc_vers,
+ ac_cv_lbl_gcc_vers=`$CC -v 2>&1 | \
+ sed -e '/^gcc version /!d' \
+ -e 's/^gcc version //' \
+ -e 's/ .*//' -e 's/^[[[^0-9]]]*//' \
+ -e 's/\..*//'`)
+ AC_MSG_RESULT($ac_cv_lbl_gcc_vers)
+ if test $ac_cv_lbl_gcc_vers -gt 1 ; then
+ $1="-O2"
+ fi
+ fi
+ else
+ AC_MSG_CHECKING(that $CC handles ansi prototypes)
+ AC_CACHE_VAL(ac_cv_lbl_cc_ansi_prototypes,
+ AC_TRY_COMPILE(
+ [#include <sys/types.h>],
+ [int frob(int, char *)],
+ ac_cv_lbl_cc_ansi_prototypes=yes,
+ ac_cv_lbl_cc_ansi_prototypes=no))
+ AC_MSG_RESULT($ac_cv_lbl_cc_ansi_prototypes)
+ if test $ac_cv_lbl_cc_ansi_prototypes = no ; then
+ case "$host_os" in
+
+ hpux*)
+ AC_MSG_CHECKING(for HP-UX ansi compiler ($CC -Aa -D_HPUX_SOURCE))
+ savedcflags="$CFLAGS"
+ CFLAGS="-Aa -D_HPUX_SOURCE $CFLAGS"
+ AC_CACHE_VAL(ac_cv_lbl_cc_hpux_cc_aa,
+ AC_TRY_COMPILE(
+ [#include <sys/types.h>],
+ [int frob(int, char *)],
+ ac_cv_lbl_cc_hpux_cc_aa=yes,
+ ac_cv_lbl_cc_hpux_cc_aa=no))
+ AC_MSG_RESULT($ac_cv_lbl_cc_hpux_cc_aa)
+ if test $ac_cv_lbl_cc_hpux_cc_aa = no ; then
+ AC_MSG_ERROR(see the INSTALL doc for more info)
+ fi
+ CFLAGS="$savedcflags"
+ $1="-Aa $$1"
+ AC_DEFINE(_HPUX_SOURCE,1,[needed on HP-UX])
+ ;;
+
+ osf*)
+ AC_MSG_CHECKING(for ansi mode in DEC compiler ($CC -std1))
+ savedcflags="$CFLAGS"
+ CFLAGS="-std1"
+ AC_CACHE_VAL(ac_cv_lbl_cc_osf1_cc_std1,
+ AC_TRY_COMPILE(
+ [#include <sys/types.h>],
+ [int frob(int, char *)],
+ ac_cv_lbl_cc_osf1_cc_std1=yes,
+ ac_cv_lbl_cc_osf1_cc_std1=no))
+ AC_MSG_RESULT($ac_cv_lbl_cc_osf1_cc_std1)
+ if test $ac_cv_lbl_cc_osf1_cc_std1 = no ; then
+ AC_MSG_ERROR(see the INSTALL doc for more info)
+ fi
+ CFLAGS="$savedcflags"
+ $1="-std1 $$1"
+ ;;
+
+ *)
+ AC_MSG_ERROR(see the INSTALL doc for more info)
+ ;;
+ esac
+ fi
+ $2="$$2 -I/usr/local/include"
+ LDFLAGS="$LDFLAGS -L/usr/local/lib"
+
+ case "$host_os" in
+
+ irix*)
+ $1="$$1 -xansi -signed -g3"
+ ;;
+
+ osf*)
+ #
+ # Presumed to be DEC OSF/1, Digital UNIX, or
+ # Tru64 UNIX.
+ #
+ $1="$$1 -g3"
+ ;;
+
+ ultrix*)
+ AC_MSG_CHECKING(that Ultrix $CC hacks const in prototypes)
+ AC_CACHE_VAL(ac_cv_lbl_cc_const_proto,
+ AC_TRY_COMPILE(
+ [#include <sys/types.h>],
+ [struct a { int b; };
+ void c(const struct a *)],
+ ac_cv_lbl_cc_const_proto=yes,
+ ac_cv_lbl_cc_const_proto=no))
+ AC_MSG_RESULT($ac_cv_lbl_cc_const_proto)
+ if test $ac_cv_lbl_cc_const_proto = no ; then
+ AC_DEFINE(const,[],
+ [to handle Ultrix compilers that don't support const in prototypes])
+ fi
+ ;;
+ esac
+ fi
+])
+
+dnl
+dnl Determine what options are needed to build a shared library
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_SHLIBS_INIT
+dnl
+dnl results:
+dnl
+dnl V_CCOPT (modified to build position-independent code)
+dnl V_SHLIB_CMD
+dnl V_SHLIB_OPT
+dnl V_SONAME_OPT
+dnl V_RPATH_OPT
+dnl
+AC_DEFUN(AC_LBL_SHLIBS_INIT,
+ [AC_PREREQ(2.50)
+ if test "$GCC" = yes ; then
+ #
+ # On platforms where we build a shared library:
+ #
+ # add options to generate position-independent code,
+ # if necessary (it's the default in AIX and Darwin/OS X);
+ #
+ # define option to set the soname of the shared library,
+ # if the OS supports that;
+ #
+ # add options to specify, at link time, a directory to
+ # add to the run-time search path, if that's necessary.
+ #
+ V_SHLIB_CMD="\$(CC)"
+ V_SHLIB_OPT="-shared"
+ case "$host_os" in
+
+ aix*)
+ ;;
+
+ freebsd*|netbsd*|openbsd*|dragonfly*|linux*|osf*)
+ #
+ # Platforms where the linker is the GNU linker
+ # or accepts command-line arguments like
+ # those the GNU linker accepts.
+ #
+ # Some instruction sets require -fPIC on some
+ # operating systems. Check for them. If you
+ # have a combination that requires it, add it
+ # here.
+ #
+ PIC_OPT=-fpic
+ case "$host_cpu" in
+
+ sparc64*)
+ case "$host_os" in
+
+ freebsd*)
+ PIC_OPT=-fPIC
+ ;;
+ esac
+ ;;
+ esac
+ V_CCOPT="$V_CCOPT $PIC_OPT"
+ V_SONAME_OPT="-Wl,-soname,"
+ V_RPATH_OPT="-Wl,-rpath,"
+ ;;
+
+ hpux*)
+ V_CCOPT="$V_CCOPT -fpic"
+ #
+ # XXX - this assumes GCC is using the HP linker,
+ # rather than the GNU linker, and that the "+h"
+ # option is used on all HP-UX platforms, both .sl
+ # and .so.
+ #
+ V_SONAME_OPT="-Wl,+h,"
+ #
+ # By default, directories specifed with -L
+ # are added to the run-time search path, so
+ # we don't add them in pcap-config.
+ #
+ ;;
+
+ solaris*)
+ V_CCOPT="$V_CCOPT -fpic"
+ #
+ # XXX - this assumes GCC is using the Sun linker,
+ # rather than the GNU linker.
+ #
+ V_SONAME_OPT="-Wl,-h,"
+ V_RPATH_OPT="-Wl,-R,"
+ ;;
+ esac
+ else
+ #
+ # Set the appropriate compiler flags and, on platforms
+ # where we build a shared library:
+ #
+ # add options to generate position-independent code,
+ # if necessary (it's the default in Darwin/OS X);
+ #
+ # if we generate ".so" shared libraries, define the
+ # appropriate options for building the shared library;
+ #
+ # add options to specify, at link time, a directory to
+ # add to the run-time search path, if that's necessary.
+ #
+ # Note: spaces after V_SONAME_OPT are significant; on
+ # some platforms the soname is passed with a GCC-like
+ # "-Wl,-soname,{soname}" option, with the soname part
+ # of the option, while on other platforms the C compiler
+ # driver takes it as a regular option with the soname
+ # following the option. The same applies to V_RPATH_OPT.
+ #
+ case "$host_os" in
+
+ aix*)
+ V_SHLIB_CMD="\$(CC)"
+ V_SHLIB_OPT="-G -bnoentry -bexpall"
+ ;;
+
+ freebsd*|netbsd*|openbsd*|dragonfly*|linux*)
+ #
+ # "cc" is GCC.
+ #
+ V_CCOPT="$V_CCOPT -fpic"
+ V_SHLIB_CMD="\$(CC)"
+ V_SHLIB_OPT="-shared"
+ V_SONAME_OPT="-Wl,-soname,"
+ V_RPATH_OPT="-Wl,-rpath,"
+ ;;
+
+ hpux*)
+ V_CCOPT="$V_CCOPT +z"
+ V_SHLIB_CMD="\$(LD)"
+ V_SHLIB_OPT="-b"
+ V_SONAME_OPT="+h "
+ #
+ # By default, directories specifed with -L
+ # are added to the run-time search path, so
+ # we don't add them in pcap-config.
+ #
+ ;;
+
+ osf*)
+ #
+ # Presumed to be DEC OSF/1, Digital UNIX, or
+ # Tru64 UNIX.
+ #
+ V_SHLIB_CMD="\$(CC)"
+ V_SHLIB_OPT="-shared"
+ V_SONAME_OPT="-soname "
+ V_RPATH_OPT="-rpath "
+ ;;
+
+ solaris*)
+ V_CCOPT="$V_CCOPT -Kpic"
+ V_SHLIB_CMD="\$(CC)"
+ V_SHLIB_OPT="-G"
+ V_SONAME_OPT="-h "
+ V_RPATH_OPT="-R"
+ ;;
+ esac
+ fi
+])
+
+#
+# Try compiling a sample of the type of code that appears in
+# gencode.c with "inline", "__inline__", and "__inline".
+#
+# Autoconf's AC_C_INLINE, at least in autoconf 2.13, isn't good enough,
+# as it just tests whether a function returning "int" can be inlined;
+# at least some versions of HP's C compiler can inline that, but can't
+# inline a function that returns a struct pointer.
+#
+# Make sure we use the V_CCOPT flags, because some of those might
+# disable inlining.
+#
+AC_DEFUN(AC_LBL_C_INLINE,
+ [AC_MSG_CHECKING(for inline)
+ save_CFLAGS="$CFLAGS"
+ CFLAGS="$V_CCOPT"
+ AC_CACHE_VAL(ac_cv_lbl_inline, [
+ ac_cv_lbl_inline=""
+ ac_lbl_cc_inline=no
+ for ac_lbl_inline in inline __inline__ __inline
+ do
+ AC_TRY_COMPILE(
+ [#define inline $ac_lbl_inline
+ static inline struct iltest *foo(void);
+ struct iltest {
+ int iltest1;
+ int iltest2;
+ };
+
+ static inline struct iltest *
+ foo()
+ {
+ static struct iltest xxx;
+
+ return &xxx;
+ }],,ac_lbl_cc_inline=yes,)
+ if test "$ac_lbl_cc_inline" = yes ; then
+ break;
+ fi
+ done
+ if test "$ac_lbl_cc_inline" = yes ; then
+ ac_cv_lbl_inline=$ac_lbl_inline
+ fi])
+ CFLAGS="$save_CFLAGS"
+ if test ! -z "$ac_cv_lbl_inline" ; then
+ AC_MSG_RESULT($ac_cv_lbl_inline)
+ else
+ AC_MSG_RESULT(no)
+ fi
+ AC_DEFINE_UNQUOTED(inline, $ac_cv_lbl_inline, [Define as token for inline if inlining supported])])
+
+dnl
+dnl If using gcc, make sure we have ANSI ioctl definitions
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_FIXINCLUDES
+dnl
+AC_DEFUN(AC_LBL_FIXINCLUDES,
+ [if test "$GCC" = yes ; then
+ AC_MSG_CHECKING(for ANSI ioctl definitions)
+ AC_CACHE_VAL(ac_cv_lbl_gcc_fixincludes,
+ AC_TRY_COMPILE(
+ [/*
+ * This generates a "duplicate case value" when fixincludes
+ * has not be run.
+ */
+# include <sys/types.h>
+# include <sys/time.h>
+# include <sys/ioctl.h>
+# ifdef HAVE_SYS_IOCCOM_H
+# include <sys/ioccom.h>
+# endif],
+ [switch (0) {
+ case _IO('A', 1):;
+ case _IO('B', 1):;
+ }],
+ ac_cv_lbl_gcc_fixincludes=yes,
+ ac_cv_lbl_gcc_fixincludes=no))
+ AC_MSG_RESULT($ac_cv_lbl_gcc_fixincludes)
+ if test $ac_cv_lbl_gcc_fixincludes = no ; then
+ # Don't cache failure
+ unset ac_cv_lbl_gcc_fixincludes
+ AC_MSG_ERROR(see the INSTALL for more info)
+ fi
+ fi])
+
+dnl
+dnl Check for flex, default to lex
+dnl Require flex 2.4 or higher
+dnl Check for bison, default to yacc
+dnl Default to lex/yacc if both flex and bison are not available
+dnl Define the yy prefix string if using flex and bison
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_LEX_AND_YACC(lex, yacc, yyprefix)
+dnl
+dnl results:
+dnl
+dnl $1 (lex set)
+dnl $2 (yacc appended)
+dnl $3 (optional flex and bison -P prefix)
+dnl
+AC_DEFUN(AC_LBL_LEX_AND_YACC,
+ [AC_ARG_WITH(flex, [ --without-flex don't use flex])
+ AC_ARG_WITH(bison, [ --without-bison don't use bison])
+ if test "$with_flex" = no ; then
+ $1=lex
+ else
+ AC_CHECK_PROGS($1, flex, lex)
+ fi
+ if test "$$1" = flex ; then
+ # The -V flag was added in 2.4
+ AC_MSG_CHECKING(for flex 2.4 or higher)
+ AC_CACHE_VAL(ac_cv_lbl_flex_v24,
+ if flex -V >/dev/null 2>&1; then
+ ac_cv_lbl_flex_v24=yes
+ else
+ ac_cv_lbl_flex_v24=no
+ fi)
+ AC_MSG_RESULT($ac_cv_lbl_flex_v24)
+ if test $ac_cv_lbl_flex_v24 = no ; then
+ s="2.4 or higher required"
+ AC_MSG_WARN(ignoring obsolete flex executable ($s))
+ $1=lex
+ fi
+ fi
+ if test "$with_bison" = no ; then
+ $2=yacc
+ else
+ AC_CHECK_PROGS($2, bison, yacc)
+ fi
+ if test "$$2" = bison ; then
+ $2="$$2 -y"
+ fi
+ if test "$$1" != lex -a "$$2" = yacc -o "$$1" = lex -a "$$2" != yacc ; then
+ AC_MSG_WARN(don't have both flex and bison; reverting to lex/yacc)
+ $1=lex
+ $2=yacc
+ fi
+ if test "$$1" = flex -a -n "$3" ; then
+ $1="$$1 -P$3"
+ $2="$$2 -p $3"
+ fi])
+
+dnl
+dnl Checks to see if union wait is used with WEXITSTATUS()
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_UNION_WAIT
+dnl
+dnl results:
+dnl
+dnl DECLWAITSTATUS (defined)
+dnl
+AC_DEFUN(AC_LBL_UNION_WAIT,
+ [AC_MSG_CHECKING(if union wait is used)
+ AC_CACHE_VAL(ac_cv_lbl_union_wait,
+ AC_TRY_COMPILE([
+# include <sys/types.h>
+# include <sys/wait.h>],
+ [int status;
+ u_int i = WEXITSTATUS(status);
+ u_int j = waitpid(0, &status, 0);],
+ ac_cv_lbl_union_wait=no,
+ ac_cv_lbl_union_wait=yes))
+ AC_MSG_RESULT($ac_cv_lbl_union_wait)
+ if test $ac_cv_lbl_union_wait = yes ; then
+ AC_DEFINE(DECLWAITSTATUS,union wait,[type for wait])
+ else
+ AC_DEFINE(DECLWAITSTATUS,int,[type for wait])
+ fi])
+
+dnl
+dnl Checks to see if the sockaddr struct has the 4.4 BSD sa_len member
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_SOCKADDR_SA_LEN
+dnl
+dnl results:
+dnl
+dnl HAVE_SOCKADDR_SA_LEN (defined)
+dnl
+AC_DEFUN(AC_LBL_SOCKADDR_SA_LEN,
+ [AC_MSG_CHECKING(if sockaddr struct has the sa_len member)
+ AC_CACHE_VAL(ac_cv_lbl_sockaddr_has_sa_len,
+ AC_TRY_COMPILE([
+# include <sys/types.h>
+# include <sys/socket.h>],
+ [u_int i = sizeof(((struct sockaddr *)0)->sa_len)],
+ ac_cv_lbl_sockaddr_has_sa_len=yes,
+ ac_cv_lbl_sockaddr_has_sa_len=no))
+ AC_MSG_RESULT($ac_cv_lbl_sockaddr_has_sa_len)
+ if test $ac_cv_lbl_sockaddr_has_sa_len = yes ; then
+ AC_DEFINE(HAVE_SOCKADDR_SA_LEN,1,[if struct sockaddr has the sa_len member])
+ fi])
+
+dnl
+dnl Checks to see if there's a sockaddr_storage structure
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_SOCKADDR_STORAGE
+dnl
+dnl results:
+dnl
+dnl HAVE_SOCKADDR_STORAGE (defined)
+dnl
+AC_DEFUN(AC_LBL_SOCKADDR_STORAGE,
+ [AC_MSG_CHECKING(if sockaddr_storage struct exists)
+ AC_CACHE_VAL(ac_cv_lbl_has_sockaddr_storage,
+ AC_TRY_COMPILE([
+# include <sys/types.h>
+# include <sys/socket.h>],
+ [u_int i = sizeof (struct sockaddr_storage)],
+ ac_cv_lbl_has_sockaddr_storage=yes,
+ ac_cv_lbl_has_sockaddr_storage=no))
+ AC_MSG_RESULT($ac_cv_lbl_has_sockaddr_storage)
+ if test $ac_cv_lbl_has_sockaddr_storage = yes ; then
+ AC_DEFINE(HAVE_SOCKADDR_STORAGE,1,[if struct sockaddr_storage exists])
+ fi])
+
+dnl
+dnl Checks to see if the dl_hp_ppa_info_t struct has the HP-UX 11.00
+dnl dl_module_id_1 member
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_HP_PPA_INFO_T_DL_MODULE_ID_1
+dnl
+dnl results:
+dnl
+dnl HAVE_HP_PPA_INFO_T_DL_MODULE_ID_1 (defined)
+dnl
+dnl NOTE: any compile failure means we conclude that it doesn't have
+dnl that member, so if we don't have DLPI, don't have a <sys/dlpi_ext.h>
+dnl header, or have one that doesn't declare a dl_hp_ppa_info_t type,
+dnl we conclude it doesn't have that member (which is OK, as either we
+dnl won't be using code that would use that member, or we wouldn't
+dnl compile in any case).
+dnl
+AC_DEFUN(AC_LBL_HP_PPA_INFO_T_DL_MODULE_ID_1,
+ [AC_MSG_CHECKING(if dl_hp_ppa_info_t struct has dl_module_id_1 member)
+ AC_CACHE_VAL(ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1,
+ AC_TRY_COMPILE([
+# include <sys/types.h>
+# include <sys/dlpi.h>
+# include <sys/dlpi_ext.h>],
+ [u_int i = sizeof(((dl_hp_ppa_info_t *)0)->dl_module_id_1)],
+ ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1=yes,
+ ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1=no))
+ AC_MSG_RESULT($ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1)
+ if test $ac_cv_lbl_dl_hp_ppa_info_t_has_dl_module_id_1 = yes ; then
+ AC_DEFINE(HAVE_HP_PPA_INFO_T_DL_MODULE_ID_1,1,[if ppa_info_t_dl_module_id exists])
+ fi])
+
+dnl
+dnl Checks to see if -R is used
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_HAVE_RUN_PATH
+dnl
+dnl results:
+dnl
+dnl ac_cv_lbl_have_run_path (yes or no)
+dnl
+AC_DEFUN(AC_LBL_HAVE_RUN_PATH,
+ [AC_MSG_CHECKING(for ${CC-cc} -R)
+ AC_CACHE_VAL(ac_cv_lbl_have_run_path,
+ [echo 'main(){}' > conftest.c
+ ${CC-cc} -o conftest conftest.c -R/a1/b2/c3 >conftest.out 2>&1
+ if test ! -s conftest.out ; then
+ ac_cv_lbl_have_run_path=yes
+ else
+ ac_cv_lbl_have_run_path=no
+ fi
+ rm -f -r conftest*])
+ AC_MSG_RESULT($ac_cv_lbl_have_run_path)
+ ])
+
+dnl
+dnl Checks to see if unaligned memory accesses fail
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_UNALIGNED_ACCESS
+dnl
+dnl results:
+dnl
+dnl LBL_ALIGN (DEFINED)
+dnl
+AC_DEFUN(AC_LBL_UNALIGNED_ACCESS,
+ [AC_MSG_CHECKING(if unaligned accesses fail)
+ AC_CACHE_VAL(ac_cv_lbl_unaligned_fail,
+ [case "$host_cpu" in
+
+ #
+ # These are CPU types where:
+ #
+ # the CPU faults on an unaligned access, but at least some
+ # OSes that support that CPU catch the fault and simulate
+ # the unaligned access (e.g., Alpha/{Digital,Tru64} UNIX) -
+ # the simulation is slow, so we don't want to use it;
+ #
+ # the CPU, I infer (from the old
+ #
+ # XXX: should also check that they don't do weird things (like on arm)
+ #
+ # comment) doesn't fault on unaligned accesses, but doesn't
+ # do a normal unaligned fetch, either (e.g., presumably, ARM);
+ #
+ # for whatever reason, the test program doesn't work
+ # (this has been claimed to be the case for several of those
+ # CPUs - I don't know what the problem is; the problem
+ # was reported as "the test program dumps core" for SuperH,
+ # but that's what the test program is *supposed* to do -
+ # it dumps core before it writes anything, so the test
+ # for an empty output file should find an empty output
+ # file and conclude that unaligned accesses don't work).
+ #
+ # This run-time test won't work if you're cross-compiling, so
+ # in order to support cross-compiling for a particular CPU,
+ # we have to wire in the list of CPU types anyway, as far as
+ # I know, so perhaps we should just have a set of CPUs on
+ # which we know it doesn't work, a set of CPUs on which we
+ # know it does work, and have the script just fail on other
+ # cpu types and update it when such a failure occurs.
+ #
+ alpha*|arm*|bfin*|hp*|mips*|sh*|sparc*|ia64|nv1)
+ ac_cv_lbl_unaligned_fail=yes
+ ;;
+
+ *)
+ cat >conftest.c <<EOF
+# include <sys/types.h>
+# include <sys/wait.h>
+# include <stdio.h>
+ unsigned char a[[5]] = { 1, 2, 3, 4, 5 };
+ main() {
+ unsigned int i;
+ pid_t pid;
+ int status;
+ /* avoid "core dumped" message */
+ pid = fork();
+ if (pid < 0)
+ exit(2);
+ if (pid > 0) {
+ /* parent */
+ pid = waitpid(pid, &status, 0);
+ if (pid < 0)
+ exit(3);
+ exit(!WIFEXITED(status));
+ }
+ /* child */
+ i = *(unsigned int *)&a[[1]];
+ printf("%d\n", i);
+ exit(0);
+ }
+EOF
+ ${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS \
+ conftest.c $LIBS >/dev/null 2>&1
+ if test ! -x conftest ; then
+ dnl failed to compile for some reason
+ ac_cv_lbl_unaligned_fail=yes
+ else
+ ./conftest >conftest.out
+ if test ! -s conftest.out ; then
+ ac_cv_lbl_unaligned_fail=yes
+ else
+ ac_cv_lbl_unaligned_fail=no
+ fi
+ fi
+ rm -f -r conftest* core core.conftest
+ ;;
+ esac])
+ AC_MSG_RESULT($ac_cv_lbl_unaligned_fail)
+ if test $ac_cv_lbl_unaligned_fail = yes ; then
+ AC_DEFINE(LBL_ALIGN,1,[if unaligned access fails])
+ fi])
+
+dnl
+dnl If using gcc and the file .devel exists:
+dnl Compile with -g (if supported) and -Wall
+dnl If using gcc 2 or later, do extra prototype checking
+dnl If an os prototype include exists, symlink os-proto.h to it
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_DEVEL(copt)
+dnl
+dnl results:
+dnl
+dnl $1 (copt appended)
+dnl HAVE_OS_PROTO_H (defined)
+dnl os-proto.h (symlinked)
+dnl
+AC_DEFUN(AC_LBL_DEVEL,
+ [rm -f os-proto.h
+ if test "${LBL_CFLAGS+set}" = set; then
+ $1="$$1 ${LBL_CFLAGS}"
+ fi
+ if test -f .devel ; then
+ if test "$GCC" = yes ; then
+ if test "${LBL_CFLAGS+set}" != set; then
+ if test "$ac_cv_prog_cc_g" = yes ; then
+ $1="-g $$1"
+ fi
+ $1="$$1 -Wall"
+ if test $ac_cv_lbl_gcc_vers -gt 1 ; then
+ $1="$$1 -Wmissing-prototypes -Wstrict-prototypes"
+ fi
+ fi
+ else
+ case "$host_os" in
+
+ irix6*)
+ V_CCOPT="$V_CCOPT -n32"
+ ;;
+
+ *)
+ ;;
+ esac
+ fi
+ os=`echo $host_os | sed -e 's/\([[0-9]][[0-9]]*\)[[^0-9]].*$/\1/'`
+ name="lbl/os-$os.h"
+ if test -f $name ; then
+ ln -s $name os-proto.h
+ AC_DEFINE(HAVE_OS_PROTO_H, 1,
+ [if there's an os_proto.h for this platform, to use additional prototypes])
+ else
+ AC_MSG_WARN(can't find $name)
+ fi
+ fi])
+
+dnl
+dnl Improved version of AC_CHECK_LIB
+dnl
+dnl Thanks to John Hawkinson (jhawk@mit.edu)
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_CHECK_LIB(LIBRARY, FUNCTION [, ACTION-IF-FOUND [,
+dnl ACTION-IF-NOT-FOUND [, OTHER-LIBRARIES]]])
+dnl
+dnl results:
+dnl
+dnl LIBS
+dnl
+dnl XXX - "AC_LBL_LIBRARY_NET" was redone to use "AC_SEARCH_LIBS"
+dnl rather than "AC_LBL_CHECK_LIB", so this isn't used any more.
+dnl We keep it around for reference purposes in case it's ever
+dnl useful in the future.
+dnl
+
+define(AC_LBL_CHECK_LIB,
+[AC_MSG_CHECKING([for $2 in -l$1])
+dnl Use a cache variable name containing the library, function
+dnl name, and extra libraries to link with, because the test really is
+dnl for library $1 defining function $2, when linked with potinal
+dnl library $5, not just for library $1. Separate tests with the same
+dnl $1 and different $2's or $5's may have different results.
+ac_lib_var=`echo $1['_']$2['_']$5 | sed 'y%./+- %__p__%'`
+AC_CACHE_VAL(ac_cv_lbl_lib_$ac_lib_var,
+[ac_save_LIBS="$LIBS"
+LIBS="-l$1 $5 $LIBS"
+AC_TRY_LINK(dnl
+ifelse([$2], [main], , dnl Avoid conflicting decl of main.
+[/* Override any gcc2 internal prototype to avoid an error. */
+]ifelse(AC_LANG, CPLUSPLUS, [#ifdef __cplusplus
+extern "C"
+#endif
+])dnl
+[/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $2();
+]),
+ [$2()],
+ eval "ac_cv_lbl_lib_$ac_lib_var=yes",
+ eval "ac_cv_lbl_lib_$ac_lib_var=no")
+LIBS="$ac_save_LIBS"
+])dnl
+if eval "test \"`echo '$ac_cv_lbl_lib_'$ac_lib_var`\" = yes"; then
+ AC_MSG_RESULT(yes)
+ ifelse([$3], ,
+[changequote(, )dnl
+ ac_tr_lib=HAVE_LIB`echo $1 | sed -e 's/[^a-zA-Z0-9_]/_/g' \
+ -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'`
+changequote([, ])dnl
+ AC_DEFINE_UNQUOTED($ac_tr_lib)
+ LIBS="-l$1 $LIBS"
+], [$3])
+else
+ AC_MSG_RESULT(no)
+ifelse([$4], , , [$4
+])dnl
+fi
+])
+
+dnl
+dnl AC_LBL_LIBRARY_NET
+dnl
+dnl This test is for network applications that need socket() and
+dnl gethostbyname() -ish functions. Under Solaris, those applications
+dnl need to link with "-lsocket -lnsl". Under IRIX, they need to link
+dnl with "-lnsl" but should *not* link with "-lsocket" because
+dnl libsocket.a breaks a number of things (for instance:
+dnl gethostbyname() under IRIX 5.2, and snoop sockets under most
+dnl versions of IRIX).
+dnl
+dnl Unfortunately, many application developers are not aware of this,
+dnl and mistakenly write tests that cause -lsocket to be used under
+dnl IRIX. It is also easy to write tests that cause -lnsl to be used
+dnl under operating systems where neither are necessary (or useful),
+dnl such as SunOS 4.1.4, which uses -lnsl for TLI.
+dnl
+dnl This test exists so that every application developer does not test
+dnl this in a different, and subtly broken fashion.
+
+dnl It has been argued that this test should be broken up into two
+dnl seperate tests, one for the resolver libraries, and one for the
+dnl libraries necessary for using Sockets API. Unfortunately, the two
+dnl are carefully intertwined and allowing the autoconf user to use
+dnl them independantly potentially results in unfortunate ordering
+dnl dependancies -- as such, such component macros would have to
+dnl carefully use indirection and be aware if the other components were
+dnl executed. Since other autoconf macros do not go to this trouble,
+dnl and almost no applications use sockets without the resolver, this
+dnl complexity has not been implemented.
+dnl
+dnl The check for libresolv is in case you are attempting to link
+dnl statically and happen to have a libresolv.a lying around (and no
+dnl libnsl.a).
+dnl
+AC_DEFUN(AC_LBL_LIBRARY_NET, [
+ # Most operating systems have gethostbyname() in the default searched
+ # libraries (i.e. libc):
+ # Some OSes (eg. Solaris) place it in libnsl
+ # Some strange OSes (SINIX) have it in libsocket:
+ AC_SEARCH_LIBS(gethostbyname, nsl socket resolv)
+ # Unfortunately libsocket sometimes depends on libnsl and
+ # AC_SEARCH_LIBS isn't up to the task of handling dependencies like this.
+ if test "$ac_cv_search_gethostbyname" = "no"
+ then
+ AC_CHECK_LIB(socket, gethostbyname,
+ LIBS="-lsocket -lnsl $LIBS", , -lnsl)
+ fi
+ AC_SEARCH_LIBS(socket, socket, ,
+ AC_CHECK_LIB(socket, socket, LIBS="-lsocket -lnsl $LIBS", , -lnsl))
+ # DLPI needs putmsg under HPUX so test for -lstr while we're at it
+ AC_SEARCH_LIBS(putmsg, str)
+ ])
+
+dnl
+dnl Test for __attribute__
+dnl
+
+AC_DEFUN(AC_C___ATTRIBUTE__, [
+AC_MSG_CHECKING(for __attribute__)
+AC_CACHE_VAL(ac_cv___attribute__, [
+AC_COMPILE_IFELSE(
+ AC_LANG_SOURCE([[
+#include <stdlib.h>
+
+static void foo(void) __attribute__ ((noreturn));
+
+static void
+foo(void)
+{
+ exit(1);
+}
+
+int
+main(int argc, char **argv)
+{
+ foo();
+}
+ ]]),
+ac_cv___attribute__=yes,
+ac_cv___attribute__=no)])
+if test "$ac_cv___attribute__" = "yes"; then
+ AC_DEFINE(HAVE___ATTRIBUTE__, 1, [define if your compiler has __attribute__])
+ V_DEFS="$V_DEFS -D_U_=\"__attribute__((unused))\""
+else
+ V_DEFS="$V_DEFS -D_U_=\"\""
+fi
+AC_MSG_RESULT($ac_cv___attribute__)
+])
+
+dnl
+dnl Checks to see if tpacket_stats is defined in linux/if_packet.h
+dnl If so then pcap-linux.c can use this to report proper statistics.
+dnl
+dnl -Scott Barron
+dnl
+AC_DEFUN(AC_LBL_TPACKET_STATS,
+ [AC_MSG_CHECKING(if if_packet.h has tpacket_stats defined)
+ AC_CACHE_VAL(ac_cv_lbl_tpacket_stats,
+ AC_TRY_COMPILE([
+# include <linux/if_packet.h>],
+ [struct tpacket_stats stats],
+ ac_cv_lbl_tpacket_stats=yes,
+ ac_cv_lbl_tpacket_stats=no))
+ AC_MSG_RESULT($ac_cv_lbl_tpacket_stats)
+ if test $ac_cv_lbl_tpacket_stats = yes; then
+ AC_DEFINE(HAVE_TPACKET_STATS,1,[if if_packet.h has tpacket_stats defined])
+ fi])
+
+dnl
+dnl Checks to see if the tpacket_auxdata struct has a tp_vlan_tci member.
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI
+dnl
+dnl results:
+dnl
+dnl HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI (defined)
+dnl
+dnl NOTE: any compile failure means we conclude that it doesn't have
+dnl that member, so if we don't have tpacket_auxdata, we conclude it
+dnl doesn't have that member (which is OK, as either we won't be using
+dnl code that would use that member, or we wouldn't compile in any case).
+dnl
+AC_DEFUN(AC_LBL_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI,
+ [AC_MSG_CHECKING(if tpacket_auxdata struct has tp_vlan_tci member)
+ AC_CACHE_VAL(ac_cv_lbl_linux_tpacket_auxdata_tp_vlan_tci,
+ AC_TRY_COMPILE([
+# include <sys/types.h>
+# include <linux/if_packet.h>],
+ [u_int i = sizeof(((struct tpacket_auxdata *)0)->tp_vlan_tci)],
+ ac_cv_lbl_linux_tpacket_auxdata_tp_vlan_tci=yes,
+ ac_cv_lbl_linux_tpacket_auxdata_tp_vlan_tci=no))
+ AC_MSG_RESULT($ac_cv_lbl_linux_tpacket_auxdata_tp_vlan_tci)
+ if test $ac_cv_lbl_linux_tpacket_auxdata_tp_vlan_tci = yes ; then
+ HAVE_LINUX_TPACKET_AUXDATA=tp_vlan_tci
+ AC_SUBST(HAVE_LINUX_TPACKET_AUXDATA)
+ AC_DEFINE(HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI,1,[if tp_vlan_tci exists])
+ fi])
+
+dnl
+dnl Checks to see if Solaris has the dl_passive_req_t struct defined
+dnl in <sys/dlpi.h>.
+dnl
+dnl usage:
+dnl
+dnl AC_LBL_DL_PASSIVE_REQ_T
+dnl
+dnl results:
+dnl
+dnl HAVE_DLPI_PASSIVE (defined)
+dnl
+AC_DEFUN(AC_LBL_DL_PASSIVE_REQ_T,
+ [AC_MSG_CHECKING(if dl_passive_req_t struct exists)
+ AC_CACHE_VAL(ac_cv_lbl_has_dl_passive_req_t,
+ AC_TRY_COMPILE([
+# include <sys/types.h>
+# include <sys/dlpi.h>],
+ [u_int i = sizeof(dl_passive_req_t)],
+ ac_cv_lbl_has_dl_passive_req_t=yes,
+ ac_cv_lbl_has_dl_passive_req_t=no))
+ AC_MSG_RESULT($ac_cv_lbl_has_dl_passive_req_t)
+ if test $ac_cv_lbl_has_dl_passive_req_t = yes ; then
+ AC_DEFINE(HAVE_DLPI_PASSIVE,1,[if passive_req_t primitive
+ exists])
+ fi])
diff --git a/libpcap-1.3.0/arcnet.h b/libpcap-1.3.0/arcnet.h
new file mode 100644
index 0000000..4f86043
--- /dev/null
+++ b/libpcap-1.3.0/arcnet.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 1982, 1986, 1993
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#) $Id: arcnet.h,v 1.2 2001-04-24 02:17:52 guy Exp $ (LBL)
+ *
+ * from: NetBSD: if_arc.h,v 1.13 1999/11/19 20:41:19 thorpej Exp
+ */
+
+/* RFC 1051 */
+#define ARCTYPE_IP_OLD 240 /* IP protocol */
+#define ARCTYPE_ARP_OLD 241 /* address resolution protocol */
+
+/* RFC 1201 */
+#define ARCTYPE_IP 212 /* IP protocol */
+#define ARCTYPE_ARP 213 /* address resolution protocol */
+#define ARCTYPE_REVARP 214 /* reverse addr resolution protocol */
+
+#define ARCTYPE_ATALK 221 /* Appletalk */
+#define ARCTYPE_BANIAN 247 /* Banyan Vines */
+#define ARCTYPE_IPX 250 /* Novell IPX */
+
+#define ARCTYPE_INET6 0xc4 /* IPng */
+#define ARCTYPE_DIAGNOSE 0x80 /* as per ANSI/ATA 878.1 */
diff --git a/libpcap-1.3.0/atmuni31.h b/libpcap-1.3.0/atmuni31.h
new file mode 100644
index 0000000..880cc1a
--- /dev/null
+++ b/libpcap-1.3.0/atmuni31.h
@@ -0,0 +1,87 @@
+/*
+ * Copyright (c) 1997 Yen Yen Lim and North Dakota State University
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by Yen Yen Lim and
+ North Dakota State University
+ * 4. The name of the author may not be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * @(#) $Header: /tcpdump/master/libpcap/atmuni31.h,v 1.3 2007-10-22 19:28:58 guy Exp $ (LBL)
+ */
+
+/* Based on UNI3.1 standard by ATM Forum */
+
+/* ATM traffic types based on VPI=0 and (the following VCI */
+#define VCI_PPC 0x05 /* Point-to-point signal msg */
+#define VCI_BCC 0x02 /* Broadcast signal msg */
+#define VCI_OAMF4SC 0x03 /* Segment OAM F4 flow cell */
+#define VCI_OAMF4EC 0x04 /* End-to-end OAM F4 flow cell */
+#define VCI_METAC 0x01 /* Meta signal msg */
+#define VCI_ILMIC 0x10 /* ILMI msg */
+
+/* Q.2931 signalling messages */
+#define CALL_PROCEED 0x02 /* call proceeding */
+#define CONNECT 0x07 /* connect */
+#define CONNECT_ACK 0x0f /* connect_ack */
+#define SETUP 0x05 /* setup */
+#define RELEASE 0x4d /* release */
+#define RELEASE_DONE 0x5a /* release_done */
+#define RESTART 0x46 /* restart */
+#define RESTART_ACK 0x4e /* restart ack */
+#define STATUS 0x7d /* status */
+#define STATUS_ENQ 0x75 /* status ack */
+#define ADD_PARTY 0x80 /* add party */
+#define ADD_PARTY_ACK 0x81 /* add party ack */
+#define ADD_PARTY_REJ 0x82 /* add party rej */
+#define DROP_PARTY 0x83 /* drop party */
+#define DROP_PARTY_ACK 0x84 /* drop party ack */
+
+/* Information Element Parameters in the signalling messages */
+#define CAUSE 0x08 /* cause */
+#define ENDPT_REF 0x54 /* endpoint reference */
+#define AAL_PARA 0x58 /* ATM adaptation layer parameters */
+#define TRAFF_DESCRIP 0x59 /* atm traffic descriptors */
+#define CONNECT_ID 0x5a /* connection identifier */
+#define QOS_PARA 0x5c /* quality of service parameters */
+#define B_HIGHER 0x5d /* broadband higher layer information */
+#define B_BEARER 0x5e /* broadband bearer capability */
+#define B_LOWER 0x5f /* broadband lower information */
+#define CALLING_PARTY 0x6c /* calling party number */
+#define CALLED_PARTY 0x70 /* called party nmber */
+
+#define Q2931 0x09
+
+/* Q.2931 signalling general messages format */
+#define PROTO_POS 0 /* offset of protocol discriminator */
+#define CALL_REF_POS 2 /* offset of call reference value */
+#define MSG_TYPE_POS 5 /* offset of message type */
+#define MSG_LEN_POS 7 /* offset of mesage length */
+#define IE_BEGIN_POS 9 /* offset of first information element */
+
+/* format of signalling messages */
+#define TYPE_POS 0
+#define LEN_POS 2
+#define FIELD_BEGIN_POS 4
diff --git a/libpcap-1.3.0/bpf/net/bpf_filter.c b/libpcap-1.3.0/bpf/net/bpf_filter.c
new file mode 100644
index 0000000..0c4fb00
--- /dev/null
+++ b/libpcap-1.3.0/bpf/net/bpf_filter.c
@@ -0,0 +1,686 @@
+/*-
+ * Copyright (c) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
+ * The Regents of the University of California. All rights reserved.
+ *
+ * This code is derived from the Stanford/CMU enet packet filter,
+ * (net/enet.c) distributed as part of 4.3BSD, and code contributed
+ * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
+ * Berkeley Laboratory.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ * must display the following acknowledgement:
+ * This product includes software developed by the University of
+ * California, Berkeley and its contributors.
+ * 4. Neither the name of the University nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * @(#)bpf.c 7.5 (Berkeley) 7/15/91
+ */
+
+#if !(defined(lint) || defined(KERNEL) || defined(_KERNEL))
+static const char rcsid[] _U_ =
+ "@(#) $Header: /tcpdump/master/libpcap/bpf/net/bpf_filter.c,v 1.46 2008-01-02 04:16:46 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#ifdef WIN32
+
+#include <pcap-stdinc.h>
+
+#else /* WIN32 */
+
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#elif HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef HAVE_SYS_BITYPES_H
+#include <sys/bitypes.h>
+#endif
+
+#include <sys/param.h>
+#include <sys/types.h>
+#include <sys/time.h>
+
+#define SOLARIS (defined(sun) && (defined(__SVR4) || defined(__svr4__)))
+#if defined(__hpux) || SOLARIS
+# include <sys/sysmacros.h>
+# include <sys/stream.h>
+# define mbuf msgb
+# define m_next b_cont
+# define MLEN(m) ((m)->b_wptr - (m)->b_rptr)
+# define mtod(m,t) ((t)(m)->b_rptr)
+#else /* defined(__hpux) || SOLARIS */
+# define MLEN(m) ((m)->m_len)
+#endif /* defined(__hpux) || SOLARIS */
+
+#endif /* WIN32 */
+
+#include <pcap/bpf.h>
+
+#if !defined(KERNEL) && !defined(_KERNEL)
+#include <stdlib.h>
+#endif
+
+#define int32 bpf_int32
+#define u_int32 bpf_u_int32
+
+#ifndef LBL_ALIGN
+/*
+ * XXX - IA-64? If not, this probably won't work on Win64 IA-64
+ * systems, unless LBL_ALIGN is defined elsewhere for them.
+ * XXX - SuperH? If not, this probably won't work on WinCE SuperH
+ * systems, unless LBL_ALIGN is defined elsewhere for them.
+ */
+#if defined(sparc) || defined(__sparc__) || defined(mips) || \
+ defined(ibm032) || defined(__alpha) || defined(__hpux) || \
+ defined(__arm__)
+#define LBL_ALIGN
+#endif
+#endif
+
+#ifndef LBL_ALIGN
+#ifndef WIN32
+#include <netinet/in.h>
+#endif
+
+#define EXTRACT_SHORT(p) ((u_short)ntohs(*(u_short *)p))
+#define EXTRACT_LONG(p) (ntohl(*(u_int32 *)p))
+#else
+#define EXTRACT_SHORT(p)\
+ ((u_short)\
+ ((u_short)*((u_char *)p+0)<<8|\
+ (u_short)*((u_char *)p+1)<<0))
+#define EXTRACT_LONG(p)\
+ ((u_int32)*((u_char *)p+0)<<24|\
+ (u_int32)*((u_char *)p+1)<<16|\
+ (u_int32)*((u_char *)p+2)<<8|\
+ (u_int32)*((u_char *)p+3)<<0)
+#endif
+
+#if defined(KERNEL) || defined(_KERNEL)
+# if !defined(__hpux) && !SOLARIS
+#include <sys/mbuf.h>
+# endif
+#define MINDEX(len, _m, _k) \
+{ \
+ len = MLEN(m); \
+ while ((_k) >= len) { \
+ (_k) -= len; \
+ (_m) = (_m)->m_next; \
+ if ((_m) == 0) \
+ return 0; \
+ len = MLEN(m); \
+ } \
+}
+
+static int
+m_xword(m, k, err)
+ register struct mbuf *m;
+ register int k, *err;
+{
+ register int len;
+ register u_char *cp, *np;
+ register struct mbuf *m0;
+
+ MINDEX(len, m, k);
+ cp = mtod(m, u_char *) + k;
+ if (len - k >= 4) {
+ *err = 0;
+ return EXTRACT_LONG(cp);
+ }
+ m0 = m->m_next;
+ if (m0 == 0 || MLEN(m0) + len - k < 4)
+ goto bad;
+ *err = 0;
+ np = mtod(m0, u_char *);
+ switch (len - k) {
+
+ case 1:
+ return (cp[0] << 24) | (np[0] << 16) | (np[1] << 8) | np[2];
+
+ case 2:
+ return (cp[0] << 24) | (cp[1] << 16) | (np[0] << 8) | np[1];
+
+ default:
+ return (cp[0] << 24) | (cp[1] << 16) | (cp[2] << 8) | np[0];
+ }
+ bad:
+ *err = 1;
+ return 0;
+}
+
+static int
+m_xhalf(m, k, err)
+ register struct mbuf *m;
+ register int k, *err;
+{
+ register int len;
+ register u_char *cp;
+ register struct mbuf *m0;
+
+ MINDEX(len, m, k);
+ cp = mtod(m, u_char *) + k;
+ if (len - k >= 2) {
+ *err = 0;
+ return EXTRACT_SHORT(cp);
+ }
+ m0 = m->m_next;
+ if (m0 == 0)
+ goto bad;
+ *err = 0;
+ return (cp[0] << 8) | mtod(m0, u_char *)[0];
+ bad:
+ *err = 1;
+ return 0;
+}
+#endif
+
+/*
+ * Execute the filter program starting at pc on the packet p
+ * wirelen is the length of the original packet
+ * buflen is the amount of data present
+ * For the kernel, p is assumed to be a pointer to an mbuf if buflen is 0,
+ * in all other cases, p is a pointer to a buffer and buflen is its size.
+ */
+u_int
+bpf_filter(pc, p, wirelen, buflen)
+ register const struct bpf_insn *pc;
+ register const u_char *p;
+ u_int wirelen;
+ register u_int buflen;
+{
+ register u_int32 A, X;
+ register int k;
+ int32 mem[BPF_MEMWORDS];
+#if defined(KERNEL) || defined(_KERNEL)
+ struct mbuf *m, *n;
+ int merr, len;
+
+ if (buflen == 0) {
+ m = (struct mbuf *)p;
+ p = mtod(m, u_char *);
+ buflen = MLEN(m);
+ } else
+ m = NULL;
+#endif
+
+ if (pc == 0)
+ /*
+ * No filter means accept all.
+ */
+ return (u_int)-1;
+ A = 0;
+ X = 0;
+ --pc;
+ while (1) {
+ ++pc;
+ switch (pc->code) {
+
+ default:
+#if defined(KERNEL) || defined(_KERNEL)
+ return 0;
+#else
+ abort();
+#endif
+ case BPF_RET|BPF_K:
+ return (u_int)pc->k;
+
+ case BPF_RET|BPF_A:
+ return (u_int)A;
+
+ case BPF_LD|BPF_W|BPF_ABS:
+ k = pc->k;
+ if (k + sizeof(int32) > buflen) {
+#if defined(KERNEL) || defined(_KERNEL)
+ if (m == NULL)
+ return 0;
+ A = m_xword(m, k, &merr);
+ if (merr != 0)
+ return 0;
+ continue;
+#else
+ return 0;
+#endif
+ }
+ A = EXTRACT_LONG(&p[k]);
+ continue;
+
+ case BPF_LD|BPF_H|BPF_ABS:
+ k = pc->k;
+ if (k + sizeof(short) > buflen) {
+#if defined(KERNEL) || defined(_KERNEL)
+ if (m == NULL)
+ return 0;
+ A = m_xhalf(m, k, &merr);
+ if (merr != 0)
+ return 0;
+ continue;
+#else
+ return 0;
+#endif
+ }
+ A = EXTRACT_SHORT(&p[k]);
+ continue;
+
+ case BPF_LD|BPF_B|BPF_ABS:
+ k = pc->k;
+ if (k >= buflen) {
+#if defined(KERNEL) || defined(_KERNEL)
+ if (m == NULL)
+ return 0;
+ n = m;
+ MINDEX(len, n, k);
+ A = mtod(n, u_char *)[k];
+ continue;
+#else
+ return 0;
+#endif
+ }
+ A = p[k];
+ continue;
+
+ case BPF_LD|BPF_W|BPF_LEN:
+ A = wirelen;
+ continue;
+
+ case BPF_LDX|BPF_W|BPF_LEN:
+ X = wirelen;
+ continue;
+
+ case BPF_LD|BPF_W|BPF_IND:
+ k = X + pc->k;
+ if (k + sizeof(int32) > buflen) {
+#if defined(KERNEL) || defined(_KERNEL)
+ if (m == NULL)
+ return 0;
+ A = m_xword(m, k, &merr);
+ if (merr != 0)
+ return 0;
+ continue;
+#else
+ return 0;
+#endif
+ }
+ A = EXTRACT_LONG(&p[k]);
+ continue;
+
+ case BPF_LD|BPF_H|BPF_IND:
+ k = X + pc->k;
+ if (k + sizeof(short) > buflen) {
+#if defined(KERNEL) || defined(_KERNEL)
+ if (m == NULL)
+ return 0;
+ A = m_xhalf(m, k, &merr);
+ if (merr != 0)
+ return 0;
+ continue;
+#else
+ return 0;
+#endif
+ }
+ A = EXTRACT_SHORT(&p[k]);
+ continue;
+
+ case BPF_LD|BPF_B|BPF_IND:
+ k = X + pc->k;
+ if (k >= buflen) {
+#if defined(KERNEL) || defined(_KERNEL)
+ if (m == NULL)
+ return 0;
+ n = m;
+ MINDEX(len, n, k);
+ A = mtod(n, u_char *)[k];
+ continue;
+#else
+ return 0;
+#endif
+ }
+ A = p[k];
+ continue;
+
+ case BPF_LDX|BPF_MSH|BPF_B:
+ k = pc->k;
+ if (k >= buflen) {
+#if defined(KERNEL) || defined(_KERNEL)
+ if (m == NULL)
+ return 0;
+ n = m;
+ MINDEX(len, n, k);
+ X = (mtod(n, char *)[k] & 0xf) << 2;
+ continue;
+#else
+ return 0;
+#endif
+ }
+ X = (p[pc->k] & 0xf) << 2;
+ continue;
+
+ case BPF_LD|BPF_IMM:
+ A = pc->k;
+ continue;
+
+ case BPF_LDX|BPF_IMM:
+ X = pc->k;
+ continue;
+
+ case BPF_LD|BPF_MEM:
+ A = mem[pc->k];
+ continue;
+
+ case BPF_LDX|BPF_MEM:
+ X = mem[pc->k];
+ continue;
+
+ case BPF_ST:
+ mem[pc->k] = A;
+ continue;
+
+ case BPF_STX:
+ mem[pc->k] = X;
+ continue;
+
+ case BPF_JMP|BPF_JA:
+#if defined(KERNEL) || defined(_KERNEL)
+ /*
+ * No backward jumps allowed.
+ */
+ pc += pc->k;
+#else
+ /*
+ * XXX - we currently implement "ip6 protochain"
+ * with backward jumps, so sign-extend pc->k.
+ */
+ pc += (bpf_int32)pc->k;
+#endif
+ continue;
+
+ case BPF_JMP|BPF_JGT|BPF_K:
+ pc += (A > pc->k) ? pc->jt : pc->jf;
+ continue;
+
+ case BPF_JMP|BPF_JGE|BPF_K:
+ pc += (A >= pc->k) ? pc->jt : pc->jf;
+ continue;
+
+ case BPF_JMP|BPF_JEQ|BPF_K:
+ pc += (A == pc->k) ? pc->jt : pc->jf;
+ continue;
+
+ case BPF_JMP|BPF_JSET|BPF_K:
+ pc += (A & pc->k) ? pc->jt : pc->jf;
+ continue;
+
+ case BPF_JMP|BPF_JGT|BPF_X:
+ pc += (A > X) ? pc->jt : pc->jf;
+ continue;
+
+ case BPF_JMP|BPF_JGE|BPF_X:
+ pc += (A >= X) ? pc->jt : pc->jf;
+ continue;
+
+ case BPF_JMP|BPF_JEQ|BPF_X:
+ pc += (A == X) ? pc->jt : pc->jf;
+ continue;
+
+ case BPF_JMP|BPF_JSET|BPF_X:
+ pc += (A & X) ? pc->jt : pc->jf;
+ continue;
+
+ case BPF_ALU|BPF_ADD|BPF_X:
+ A += X;
+ continue;
+
+ case BPF_ALU|BPF_SUB|BPF_X:
+ A -= X;
+ continue;
+
+ case BPF_ALU|BPF_MUL|BPF_X:
+ A *= X;
+ continue;
+
+ case BPF_ALU|BPF_DIV|BPF_X:
+ if (X == 0)
+ return 0;
+ A /= X;
+ continue;
+
+ case BPF_ALU|BPF_AND|BPF_X:
+ A &= X;
+ continue;
+
+ case BPF_ALU|BPF_OR|BPF_X:
+ A |= X;
+ continue;
+
+ case BPF_ALU|BPF_LSH|BPF_X:
+ A <<= X;
+ continue;
+
+ case BPF_ALU|BPF_RSH|BPF_X:
+ A >>= X;
+ continue;
+
+ case BPF_ALU|BPF_ADD|BPF_K:
+ A += pc->k;
+ continue;
+
+ case BPF_ALU|BPF_SUB|BPF_K:
+ A -= pc->k;
+ continue;
+
+ case BPF_ALU|BPF_MUL|BPF_K:
+ A *= pc->k;
+ continue;
+
+ case BPF_ALU|BPF_DIV|BPF_K:
+ A /= pc->k;
+ continue;
+
+ case BPF_ALU|BPF_AND|BPF_K:
+ A &= pc->k;
+ continue;
+
+ case BPF_ALU|BPF_OR|BPF_K:
+ A |= pc->k;
+ continue;
+
+ case BPF_ALU|BPF_LSH|BPF_K:
+ A <<= pc->k;
+ continue;
+
+ case BPF_ALU|BPF_RSH|BPF_K:
+ A >>= pc->k;
+ continue;
+
+ case BPF_ALU|BPF_NEG:
+ A = -A;
+ continue;
+
+ case BPF_MISC|BPF_TAX:
+ X = A;
+ continue;
+
+ case BPF_MISC|BPF_TXA:
+ A = X;
+ continue;
+ }
+ }
+}
+
+/*
+ * Return true if the 'fcode' is a valid filter program.
+ * The constraints are that each jump be forward and to a valid
+ * code, that memory accesses are within valid ranges (to the
+ * extent that this can be checked statically; loads of packet
+ * data have to be, and are, also checked at run time), and that
+ * the code terminates with either an accept or reject.
+ *
+ * The kernel needs to be able to verify an application's filter code.
+ * Otherwise, a bogus program could easily crash the system.
+ */
+int
+bpf_validate(f, len)
+ const struct bpf_insn *f;
+ int len;
+{
+ u_int i, from;
+ const struct bpf_insn *p;
+
+ if (len < 1)
+ return 0;
+ /*
+ * There's no maximum program length in userland.
+ */
+#if defined(KERNEL) || defined(_KERNEL)
+ if (len > BPF_MAXINSNS)
+ return 0;
+#endif
+
+ for (i = 0; i < len; ++i) {
+ p = &f[i];
+ switch (BPF_CLASS(p->code)) {
+ /*
+ * Check that memory operations use valid addresses.
+ */
+ case BPF_LD:
+ case BPF_LDX:
+ switch (BPF_MODE(p->code)) {
+ case BPF_IMM:
+ break;
+ case BPF_ABS:
+ case BPF_IND:
+ case BPF_MSH:
+ /*
+ * There's no maximum packet data size
+ * in userland. The runtime packet length
+ * check suffices.
+ */
+#if defined(KERNEL) || defined(_KERNEL)
+ /*
+ * More strict check with actual packet length
+ * is done runtime.
+ */
+ if (p->k >= bpf_maxbufsize)
+ return 0;
+#endif
+ break;
+ case BPF_MEM:
+ if (p->k >= BPF_MEMWORDS)
+ return 0;
+ break;
+ case BPF_LEN:
+ break;
+ default:
+ return 0;
+ }
+ break;
+ case BPF_ST:
+ case BPF_STX:
+ if (p->k >= BPF_MEMWORDS)
+ return 0;
+ break;
+ case BPF_ALU:
+ switch (BPF_OP(p->code)) {
+ case BPF_ADD:
+ case BPF_SUB:
+ case BPF_MUL:
+ case BPF_OR:
+ case BPF_AND:
+ case BPF_LSH:
+ case BPF_RSH:
+ case BPF_NEG:
+ break;
+ case BPF_DIV:
+ /*
+ * Check for constant division by 0.
+ */
+ if (BPF_SRC(p->code) == BPF_K && p->k == 0)
+ return 0;
+ break;
+ default:
+ return 0;
+ }
+ break;
+ case BPF_JMP:
+ /*
+ * Check that jumps are within the code block,
+ * and that unconditional branches don't go
+ * backwards as a result of an overflow.
+ * Unconditional branches have a 32-bit offset,
+ * so they could overflow; we check to make
+ * sure they don't. Conditional branches have
+ * an 8-bit offset, and the from address is <=
+ * BPF_MAXINSNS, and we assume that BPF_MAXINSNS
+ * is sufficiently small that adding 255 to it
+ * won't overflow.
+ *
+ * We know that len is <= BPF_MAXINSNS, and we
+ * assume that BPF_MAXINSNS is < the maximum size
+ * of a u_int, so that i + 1 doesn't overflow.
+ *
+ * For userland, we don't know that the from
+ * or len are <= BPF_MAXINSNS, but we know that
+ * from <= len, and, except on a 64-bit system,
+ * it's unlikely that len, if it truly reflects
+ * the size of the program we've been handed,
+ * will be anywhere near the maximum size of
+ * a u_int. We also don't check for backward
+ * branches, as we currently support them in
+ * userland for the protochain operation.
+ */
+ from = i + 1;
+ switch (BPF_OP(p->code)) {
+ case BPF_JA:
+#if defined(KERNEL) || defined(_KERNEL)
+ if (from + p->k < from || from + p->k >= len)
+#else
+ if (from + p->k >= len)
+#endif
+ return 0;
+ break;
+ case BPF_JEQ:
+ case BPF_JGT:
+ case BPF_JGE:
+ case BPF_JSET:
+ if (from + p->jt >= len || from + p->jf >= len)
+ return 0;
+ break;
+ default:
+ return 0;
+ }
+ break;
+ case BPF_RET:
+ break;
+ case BPF_MISC:
+ break;
+ default:
+ return 0;
+ }
+ }
+ return BPF_CLASS(f[len - 1].code) == BPF_RET;
+}
diff --git a/libpcap-1.3.0/bpf_dump.c b/libpcap-1.3.0/bpf_dump.c
new file mode 100644
index 0000000..e4ff4a2
--- /dev/null
+++ b/libpcap-1.3.0/bpf_dump.c
@@ -0,0 +1,62 @@
+/*
+ * Copyright (c) 1992, 1993, 1994, 1995, 1996
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that: (1) source code distributions
+ * retain the above copyright notice and this paragraph in its entirety, (2)
+ * distributions including binary code include the above copyright notice and
+ * this paragraph in its entirety in the documentation or other materials
+ * provided with the distribution, and (3) all advertising materials mentioning
+ * features or use of this software display the following acknowledgement:
+ * ``This product includes software developed by the University of California,
+ * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
+ * the University nor the names of its contributors may be used to endorse
+ * or promote products derived from this software without specific prior
+ * written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+#ifndef lint
+static const char rcsid[] _U_ =
+ "@(#) $Header: /tcpdump/master/libpcap/bpf_dump.c,v 1.15 2008-01-02 04:16:46 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <pcap.h>
+#include <stdio.h>
+
+void
+bpf_dump(const struct bpf_program *p, int option)
+{
+ const struct bpf_insn *insn;
+ int i;
+ int n = p->bf_len;
+
+ insn = p->bf_insns;
+ if (option > 2) {
+ printf("%d\n", n);
+ for (i = 0; i < n; ++insn, ++i) {
+ printf("%u %u %u %u\n", insn->code,
+ insn->jt, insn->jf, insn->k);
+ }
+ return ;
+ }
+ if (option > 1) {
+ for (i = 0; i < n; ++insn, ++i)
+ printf("{ 0x%x, %d, %d, 0x%08x },\n",
+ insn->code, insn->jt, insn->jf, insn->k);
+ return;
+ }
+ for (i = 0; i < n; ++insn, ++i) {
+#ifdef BDEBUG
+ extern int bids[];
+ printf(bids[i] > 0 ? "[%02d]" : " -- ", bids[i] - 1);
+#endif
+ puts(bpf_image(insn, i));
+ }
+}
diff --git a/libpcap-1.3.0/bpf_image.c b/libpcap-1.3.0/bpf_image.c
new file mode 100644
index 0000000..e2f1a77
--- /dev/null
+++ b/libpcap-1.3.0/bpf_image.c
@@ -0,0 +1,302 @@
+/*
+ * Copyright (c) 1990, 1991, 1992, 1994, 1995, 1996
+ * The Regents of the University of California. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that: (1) source code distributions
+ * retain the above copyright notice and this paragraph in its entirety, (2)
+ * distributions including binary code include the above copyright notice and
+ * this paragraph in its entirety in the documentation or other materials
+ * provided with the distribution, and (3) all advertising materials mentioning
+ * features or use of this software display the following acknowledgement:
+ * ``This product includes software developed by the University of California,
+ * Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
+ * the University nor the names of its contributors may be used to endorse
+ * or promote products derived from this software without specific prior
+ * written permission.
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef lint
+static const char rcsid[] _U_ =
+ "@(#) $Header: /tcpdump/master/libpcap/bpf_image.c,v 1.28 2008-01-02 04:16:46 guy Exp $ (LBL)";
+#endif
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#ifdef WIN32
+#include <pcap-stdinc.h>
+#else /* WIN32 */
+#if HAVE_INTTYPES_H
+#include <inttypes.h>
+#elif HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef HAVE_SYS_BITYPES_H
+#include <sys/bitypes.h>
+#endif
+#include <sys/types.h>
+#endif /* WIN32 */
+
+#include <stdio.h>
+#include <string.h>
+
+#include "pcap-int.h"
+
+#ifdef HAVE_OS_PROTO_H
+#include "os-proto.h"
+#endif
+
+char *
+bpf_image(p, n)
+ const struct bpf_insn *p;
+ int n;
+{
+ int v;
+ const char *fmt, *op;
+ static char image[256];
+ char operand[64];
+
+ v = p->k;
+ switch (p->code) {
+
+ default:
+ op = "unimp";
+ fmt = "0x%x";
+ v = p->code;
+ break;
+
+ case BPF_RET|BPF_K:
+ op = "ret";
+ fmt = "#%d";
+ break;
+
+ case BPF_RET|BPF_A:
+ op = "ret";
+ fmt = "";
+ break;
+
+ case BPF_LD|BPF_W|BPF_ABS:
+ op = "ld";
+ fmt = "[%d]";
+ break;
+
+ case BPF_LD|BPF_H|BPF_ABS:
+ op = "ldh";
+ fmt = "[%d]";
+ break;
+
+ case BPF_LD|BPF_B|BPF_ABS:
+ op = "ldb";
+ fmt = "[%d]";
+ break;
+
+ case BPF_LD|BPF_W|BPF_LEN:
+ op = "ld";
+ fmt = "#pktlen";
+ break;
+
+ case BPF_LD|BPF_W|BPF_IND:
+ op = "ld";
+ fmt = "[x + %d]";
+ break;
+
+ case BPF_LD|BPF_H|BPF_IND:
+ op = "ldh";
+ fmt = "[x + %d]";
+ break;
+
+ case BPF_LD|BPF_B|BPF_IND:
+ op = "ldb";
+ fmt = "[x + %d]";
+ break;
+
+ case BPF_LD|BPF_IMM:
+ op = "ld";
+ fmt = "#0x%x";
+ break;
+
+ case BPF_LDX|BPF_IMM:
+ op = "ldx";
+ fmt = "#0x%x";
+ break;
+
+ case BPF_LDX|BPF_MSH|BPF_B:
+ op = "ldxb";
+ fmt = "4*([%d]&0xf)";
+ break;
+
+ case BPF_LD|BPF_MEM:
+ op = "ld";
+ fmt = "M[%d]";
+ break;
+
+ case BPF_LDX|BPF_MEM:
+ op = "ldx";
+ fmt = "M[%d]";
+ break;
+
+ case BPF_ST:
+ op = "st";
+ fmt = "M[%d]";
+ break;
+
+ case BPF_STX:
+ op = "stx";
+ fmt = "M[%d]";
+ break;
+
+ case BPF_JMP|BPF_JA:
+ op = "ja";
+ fmt = "%d";
+ v = n + 1 + p->k;
+ break;
+
+ case BPF_JMP|BPF_JGT|BPF_K:
+ op = "jgt";
+ fmt = "#0x%x";
+ break;
+
+ case BPF_JMP|BPF_JGE|BPF_K:
+ op = "jge";
+ fmt = "#0x%x";
+ break;
+
+ case BPF_JMP|BPF_JEQ|BPF_K:
+ op = "jeq";
+ fmt = "#0x%x";
+ break;
+
+ case BPF_JMP|BPF_JSET|BPF_K:
+ op = "jset";
+ fmt = "#0x%x";
+ break;
+
+ case BPF_JMP|BPF_JGT|BPF_X:
+ op = "jgt";
+ fmt = "x";
+ break;
+
+ case BPF_JMP|BPF_JGE|BPF_X:
+ op = "jge";
+ fmt = "x";
+ break;
+
+ case BPF_JMP|BPF_JEQ|BPF_X:
+ op = "jeq";
+ fmt = "x";
+ break;
+
+ case BPF_JMP|BPF_JSET|BPF_X:
+ op = "jset";
+ fmt = "x";
+ break;
+
+ case BPF_ALU|BPF_ADD|BPF_X:
+ op = "add";
+ fmt = "x";
+ break;
+
+ case BPF_ALU|BPF_SUB|BPF_X:
+ op = "sub";
+ fmt = "x";
+ break;
+
+ case BPF_ALU|BPF_MUL|BPF_X:
+ op = "mul";
+ fmt = "x";
+ break;
+
+ case BPF_ALU|BPF_DIV|BPF_X:
+ op = "div";
+ fmt = "x";
+ break;
+
+ case BPF_ALU|BPF_AND|BPF_X:
+ op = "and";
+ fmt = "x";
+ break;
+
+ case BPF_ALU|BPF_OR|BPF_X:
+ op = "or";
+ fmt = "x";
+ break;
+
+ case BPF_ALU|BPF_LSH|BPF_X:
+ op = "lsh";
+ fmt = "x";
+ break;
+
+ case BPF_ALU|BPF_RSH|BPF_X:
+ op = "rsh";
+ fmt = "x";
+ break;
+
+ case BPF_ALU|BPF_ADD|BPF_K:
+ op = "add";
+ fmt = "#%d";
+ break;
+
+ case BPF_ALU|BPF_SUB|BPF_K:
+ op = "sub";
+ fmt = "#%d";
+ break;
+
+ case BPF_ALU|BPF_MUL|BPF_K:
+ op = "mul";
+ fmt = "#%d";
+ break;
+
+ case BPF_ALU|BPF_DIV|BPF_K:
+ op = "div";
+ fmt = "#%d";
+ break;
+
+ case BPF_ALU|BPF_AND|BPF_K:
+ op = "and";
+ fmt = "#0x%x";
+ break;
+
+ case BPF_ALU|BPF_OR|BPF_K:
+ op = "or";
+ fmt = "#0x%x";
+ break;
+
+ case BPF_ALU|BPF_LSH|BPF_K:
+ op = "lsh";
+ fmt = "#%d";
+ break;
+
+ case BPF_ALU|BPF_RSH|BPF_K:
+ op = "rsh";
+ fmt = "#%d";
+ break;
+
+ case BPF_ALU|BPF_NEG:
+ op = "neg";
+ fmt = "";
+ break;
+
+ case BPF_MISC|BPF_TAX:
+ op = "tax";
+ fmt = "";
+ break;
+
+ case BPF_MISC|BPF_TXA:
+ op = "txa";
+ fmt = "";
+ break;
+ }
+ (void)snprintf(operand, sizeof operand, fmt, v);
+ (void)snprintf(image, sizeof image,
+ (BPF_CLASS(p->code) == BPF_JMP &&
+ BPF_OP(p->code) != BPF_JA) ?
+ "(%03d) %-8s %-16s jt %d\tjf %d"
+ : "(%03d) %-8s %s",
+ n, op, operand, n + 1 + p->jt, n + 1 + p->jf);
+ return image;
+}
diff --git a/libpcap-1.3.0/chmod_bpf b/libpcap-1.3.0/chmod_bpf
new file mode 100755
index 0000000..0a30d99
--- /dev/null
+++ b/libpcap-1.3.0/chmod_bpf
@@ -0,0 +1,19 @@
+#! /bin/sh
+
+#
+# Unfortunately, Mac OS X's devfs is based on the old FreeBSD
+# one, not the current one, so there's no way to configure it
+# to create BPF devices with particular owners or groups.
+# This startup item will make it owned by the admin group,
+# with permissions rw-rw----, so that anybody in the admin
+# group can use programs that capture or send raw packets.
+#
+# Change this as appropriate for your site, e.g. to make
+# it owned by a particular user without changing the permissions,
+# so only that user and the super-user can capture or send raw
+# packets, or give it the permissions rw-r-----, so that
+# only the super-user can send raw packets but anybody in the
+# admin group can capture packets.
+#
+chgrp admin /dev/bpf*
+chmod g+rw /dev/bpf*
diff --git a/libpcap-1.3.0/config.guess b/libpcap-1.3.0/config.guess
new file mode 100755
index 0000000..c2246a4
--- /dev/null
+++ b/libpcap-1.3.0/config.guess
@@ -0,0 +1,1502 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+# Free Software Foundation, Inc.
+
+timestamp='2009-12-30'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[456])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ case ${UNAME_MACHINE} in
+ pc98)
+ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-gnu
+ exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-gnu
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ i386)
+ eval $set_cc_for_build
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ UNAME_PROCESSOR="x86_64"
+ fi
+ fi ;;
+ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ c34*)
+ echo c34-convex-bsd
+ exit ;;
+ c38*)
+ echo c38-convex-bsd
+ exit ;;
+ c4*)
+ echo c4-convex-bsd
+ exit ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/libpcap-1.3.0/config.h.in b/libpcap-1.3.0/config.h.in
new file mode 100644
index 0000000..bd5177c
--- /dev/null
+++ b/libpcap-1.3.0/config.h.in
@@ -0,0 +1,314 @@
+/* config.h.in. Generated from configure.in by autoheader. */
+
+/* Enable optimizer debugging */
+#undef BDEBUG
+
+/* define if you have a cloning BPF device */
+#undef HAVE_CLONING_BPF
+
+/* define if you have the DAG API */
+#undef HAVE_DAG_API
+
+/* define if you have dag_get_erf_types() */
+#undef HAVE_DAG_GET_ERF_TYPES
+
+/* define if you have dag_get_stream_erf_types() */
+#undef HAVE_DAG_GET_STREAM_ERF_TYPES
+
+/* define if you have streams capable DAG API */
+#undef HAVE_DAG_STREAMS_API
+
+/* define if you have vdag_set_device_info() */
+#undef HAVE_DAG_VDAG
+
+/* Define to 1 if you have the declaration of `ether_hostton', and to 0 if you
+ don't. */
+#undef HAVE_DECL_ETHER_HOSTTON
+
+/* define if you have a /dev/dlpi */
+#undef HAVE_DEV_DLPI
+
+/* if passive_req_t primitive exists */
+#undef HAVE_DLPI_PASSIVE
+
+/* Define to 1 if you have the `ether_hostton' function. */
+#undef HAVE_ETHER_HOSTTON
+
+/* Define to 1 if fseeko (and presumably ftello) exists and is declared. */
+#undef HAVE_FSEEKO
+
+/* on HP-UX 10.20 or later */
+#undef HAVE_HPUX10_20_OR_LATER
+
+/* on HP-UX 9.x */
+#undef HAVE_HPUX9
+
+/* if ppa_info_t_dl_module_id exists */
+#undef HAVE_HP_PPA_INFO_T_DL_MODULE_ID_1
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* if libdlpi exists */
+#undef HAVE_LIBDLPI
+
+/* if libnl exists */
+#undef HAVE_LIBNL
+
+/* if libnl exists and is version 2.x */
+#undef HAVE_LIBNL_2_x
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the <linux/compiler.h> header file. */
+#undef HAVE_LINUX_COMPILER_H
+
+/* Define to 1 if you have the <linux/ethtool.h> header file. */
+#undef HAVE_LINUX_ETHTOOL_H
+
+/* Define to 1 if you have the <linux/if_packet.h> header file. */
+#undef HAVE_LINUX_IF_PACKET_H
+
+/* Define to 1 if you have the <linux/net_tstamp.h> header file. */
+#undef HAVE_LINUX_NET_TSTAMP_H
+
+/* if tp_vlan_tci exists */
+#undef HAVE_LINUX_TPACKET_AUXDATA_TP_VLAN_TCI
+
+/* Define to 1 if you have the <linux/types.h> header file. */
+#undef HAVE_LINUX_TYPES_H
+
+/* Define to 1 if you have the <linux/usbdevice_fs.h> header file. */
+#undef HAVE_LINUX_USBDEVICE_FS_H
+
+/* Define to 1 if you have the <linux/wireless.h> header file. */
+#undef HAVE_LINUX_WIRELESS_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <netinet/ether.h> header file. */
+#undef HAVE_NETINET_ETHER_H
+
+/* Define to 1 if you have the <netinet/if_ether.h> header file. */
+#undef HAVE_NETINET_IF_ETHER_H
+
+/* Define to 1 if you have the <netpacket/if_packet.h> header file. */
+#undef HAVE_NETPACKET_IF_PACKET_H
+
+/* Define to 1 if you have the <netpacket/packet.h> header file. */
+#undef HAVE_NETPACKET_PACKET_H
+
+/* Define to 1 if you have the <net/if_media.h> header file. */
+#undef HAVE_NET_IF_MEDIA_H
+
+/* Define to 1 if you have the <net/pfvar.h> header file. */
+#undef HAVE_NET_PFVAR_H
+
+/* if there's an os_proto.h for this platform, to use additional prototypes */
+#undef HAVE_OS_PROTO_H
+
+/* Define to 1 if you have the <paths.h> header file. */
+#undef HAVE_PATHS_H
+
+/* define if net/pfvar.h defines PF_NAT through PF_NORDR */
+#undef HAVE_PF_NAT_THROUGH_PF_NORDR
+
+/* define if you have a Septel API */
+#undef HAVE_SEPTEL_API
+
+/* define if you have Myricom SNF API */
+#undef HAVE_SNF_API
+
+/* Define to 1 if you have the `snprintf' function. */
+#undef HAVE_SNPRINTF
+
+/* if struct sockaddr has the sa_len member */
+#undef HAVE_SOCKADDR_SA_LEN
+
+/* if struct sockaddr_storage exists */
+#undef HAVE_SOCKADDR_STORAGE
+
+/* define if socklen_t is defined */
+#undef HAVE_SOCKLEN_T
+
+/* On solaris */
+#undef HAVE_SOLARIS
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the `strlcpy' function. */
+#undef HAVE_STRLCPY
+
+/* Define to 1 if the system has the type `struct BPF_TIMEVAL'. */
+#undef HAVE_STRUCT_BPF_TIMEVAL
+
+/* Define to 1 if the system has the type `struct ether_addr'. */
+#undef HAVE_STRUCT_ETHER_ADDR
+
+/* Define to 1 if you have the <sys/bitypes.h> header file. */
+#undef HAVE_SYS_BITYPES_H
+
+/* Define to 1 if you have the <sys/bufmod.h> header file. */
+#undef HAVE_SYS_BUFMOD_H
+
+/* Define to 1 if you have the <sys/dlpi_ext.h> header file. */
+#undef HAVE_SYS_DLPI_EXT_H
+
+/* Define to 1 if you have the <sys/ioccom.h> header file. */
+#undef HAVE_SYS_IOCCOM_H
+
+/* Define to 1 if you have the <sys/sockio.h> header file. */
+#undef HAVE_SYS_SOCKIO_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* if if_packet.h has tpacket_stats defined */
+#undef HAVE_TPACKET_STATS
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* if struct usbdevfs_ctrltransfer has bRequestType */
+#undef HAVE_USBDEVFS_CTRLTRANSFER_BREQUESTTYPE
+
+/* define if version.h is generated in the build procedure */
+#undef HAVE_VERSION_H
+
+/* Define to 1 if you have the `vsnprintf' function. */
+#undef HAVE_VSNPRINTF
+
+/* define if the system supports zerocopy BPF */
+#undef HAVE_ZEROCOPY_BPF
+
+/* define if your compiler has __attribute__ */
+#undef HAVE___ATTRIBUTE__
+
+/* IPv6 */
+#undef INET6
+
+/* if unaligned access fails */
+#undef LBL_ALIGN
+
+/* path for device for USB sniffing */
+#undef LINUX_USB_MON_DEV
+
+/* Define to 1 if netinet/ether.h declares `ether_hostton' */
+#undef NETINET_ETHER_H_DECLARES_ETHER_HOSTTON
+
+/* Define to 1 if netinet/if_ether.h declares `ether_hostton' */
+#undef NETINET_IF_ETHER_H_DECLARES_ETHER_HOSTTON
+
+/* do not use protochain */
+#undef NO_PROTOCHAIN
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* /dev/dlpi directory */
+#undef PCAP_DEV_PREFIX
+
+/* target host supports Bluetooth sniffing */
+#undef PCAP_SUPPORT_BT
+
+/* target host supports CAN sniffing */
+#undef PCAP_SUPPORT_CAN
+
+/* target host supports canusb */
+#undef PCAP_SUPPORT_CANUSB
+
+/* target host supports netfilter sniffing */
+#undef PCAP_SUPPORT_NETFILTER
+
+/* target host supports USB sniffing */
+#undef PCAP_SUPPORT_USB
+
+/* include ACN support */
+#undef SITA
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Enable parser debugging */
+#undef YYDEBUG
+
+/* Number of bits in a file offset, on hosts where this is settable. */
+#undef _FILE_OFFSET_BITS
+
+/* needed on HP-UX */
+#undef _HPUX_SOURCE
+
+/* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */
+#undef _LARGEFILE_SOURCE
+
+/* Define for large files, on AIX-style hosts. */
+#undef _LARGE_FILES
+
+/* define on AIX to get certain functions */
+#undef _SUN
+
+/* to handle Ultrix compilers that don't support const in prototypes */
+#undef const
+
+/* Define as token for inline if inlining supported */
+#undef inline
+
+/* Define to `short' if int16_t not defined. */
+#undef int16_t
+
+/* Define to `int' if int32_t not defined. */
+#undef int32_t
+
+/* Define to `long long' if int64_t not defined. */
+#undef int64_t
+
+/* Define to `signed char' if int8_t not defined. */
+#undef int8_t
+
+/* on sinix */
+#undef sinix
+
+/* Define to `unsigned short' if u_int16_t not defined. */
+#undef u_int16_t
+
+/* Define to `unsigned int' if u_int32_t not defined. */
+#undef u_int32_t
+
+/* Define to `unsigned long long' if u_int64_t not defined. */
+#undef u_int64_t
+
+/* Define to `unsigned char' if u_int8_t not defined. */
+#undef u_int8_t
diff --git a/libpcap-1.3.0/config.sub b/libpcap-1.3.0/config.sub
new file mode 100755
index 0000000..8518609
--- /dev/null
+++ b/libpcap-1.3.0/config.sub
@@ -0,0 +1,1708 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+# Free Software Foundation, Inc.
+
+timestamp='2009-12-31'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+ uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fido | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nios | nios2 \
+ | ns16k | ns32k \
+ | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+ | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu | strongarm \
+ | tahoe | thumb | tic4x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e \
+ | we32k \
+ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | pyramid-* \
+ | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tic54x | c54x*)
+ basic_machine=tic54x-unknown
+ os=-coff
+ ;;
+ tic55x | c55x*)
+ basic_machine=tic55x-unknown
+ os=-coff
+ ;;
+ tic6x | c6x*)
+ basic_machine=tic6x-unknown
+ os=-coff
+ ;;
+ tile*)
+ basic_machine=tile-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/libpcap-1.3.0/configure b/libpcap-1.3.0/configure
new file mode 100755
index 0000000..29e0f35
--- /dev/null
+++ b/libpcap-1.3.0/configure
@@ -0,0 +1,9080 @@
+#! /bin/sh
+# From configure.in Revision: 1.168 .
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.67.
+#
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
+# Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME=
+PACKAGE_TARNAME=
+PACKAGE_VERSION=
+PACKAGE_STRING=
+PACKAGE_BUGREPORT=
+PACKAGE_URL=
+
+ac_unique_file="pcap.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='LTLIBOBJS
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+CAN_SRC
+PCAP_SUPPORT_CAN
+CANUSB_SRC
+PCAP_SUPPORT_CANUSB
+BT_SRC
+PCAP_SUPPORT_BT
+NETFILTER_SRC
+PCAP_SUPPORT_NETFILTER
+USB_SRC
+PCAP_SUPPORT_USB
+MAN_MISC_INFO
+MAN_FILE_FORMATS
+DYEXT
+SSRC
+ADDLARCHIVEOBJS
+ADDLOBJS
+V_RPATH_OPT
+V_SONAME_OPT
+V_SHLIB_OPT
+V_SHLIB_CMD
+V_PCAP
+V_INCLS
+V_FINDALLDEVS
+V_DEFS
+V_CCOPT
+AR
+RANLIB
+V_YACC
+V_LEX
+HAVE_LINUX_TPACKET_AUXDATA
+LIBOBJS
+EGREP
+GREP
+CPP
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+SHLICC2
+target_os
+target_vendor
+target_cpu
+target
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+with_gcc
+enable_largefile
+enable_protochain
+with_sita
+with_pcap
+with_libnl
+enable_ipv6
+enable_optimizer_dbg
+enable_yydebug
+with_dag
+with_dag_includes
+with_dag_libraries
+with_septel
+with_snf
+with_snf_includes
+with_snf_libraries
+with_flex
+with_bison
+enable_universal
+enable_bluetooth
+enable_canusb
+enable_can
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used" >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures this package to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+ --target=TARGET configure for building compilers for TARGET [HOST]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-largefile omit support for large files
+ --disable-protochain disable \"protochain\" insn
+ --enable-ipv6 build IPv6-capable version [default=yes, if
+ getaddrinfo available]
+ --enable-optimizer-dbg build optimizer debugging code
+ --enable-yydebug build parser debugging code
+ --disable-universal don't build universal on OS X
+ --enable-bluetooth enable Bluetooth support [default=yes, if support
+ available]
+ --enable-canusb enable canusb support [default=yes, if support
+ available]
+
+ --enable-can enable CAN support [default=yes, if support
+ available]
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --without-gcc don't use gcc
+ --with-sita include SITA support
+ --with-pcap=TYPE use packet capture TYPE
+ --without-libnl disable libnl support [default=yes, on Linux, if
+ present]
+ --with-dag[=DIR] include Endace DAG support ["yes", "no" or DIR;
+ default="yes" on BSD and Linux if present]
+ --with-dag-includes=DIR Endace DAG include directory
+ --with-dag-libraries=DIR
+ Endace DAG library directory
+ --with-septel[=DIR] include Septel support (located in directory DIR, if
+ supplied). [default=yes, on Linux, if present]
+ --with-snf[=DIR] include Myricom SNF support ["yes", "no" or DIR;
+ default="yes" on BSD and Linux if present]
+ --with-snf-includes=DIR Myricom SNF include directory
+ --with-snf-libraries=DIR
+ Myricom SNF library directory
+ --without-flex don't use flex
+ --without-bison don't use bison
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to the package provider.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+configure
+generated by GNU Autoconf 2.67
+
+Copyright (C) 2010 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if eval "test \"\${$3+set}\"" = set; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_type
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR INCLUDES
+# ---------------------------------------------
+# Tests whether SYMBOL is declared in INCLUDES, setting cache variable VAR
+# accordingly.
+ac_fn_c_check_decl ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ as_decl_name=`echo $2|sed 's/ *(.*//'`
+ as_decl_use=`echo $2|sed -e 's/(/((/' -e 's/)/) 0&/' -e 's/,/) 0& (/g'`
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $as_decl_name is declared" >&5
+$as_echo_n "checking whether $as_decl_name is declared... " >&6; }
+if eval "test \"\${$3+set}\"" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+#ifndef $as_decl_name
+#ifdef __cplusplus
+ (void) $as_decl_use;
+#else
+ (void) $as_decl_name;
+#endif
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_decl
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by $as_me, which was
+generated by GNU Autoconf 2.67. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5 ; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5 ;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5 ;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target system type" >&5
+$as_echo_n "checking target system type... " >&6; }
+if test "${ac_cv_target+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$target_alias" = x; then
+ ac_cv_target=$ac_cv_host
+else
+ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $target_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_target" >&5
+$as_echo "$ac_cv_target" >&6; }
+case $ac_cv_target in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical target" "$LINENO" 5 ;;
+esac
+target=$ac_cv_target
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_target
+shift
+target_cpu=$1
+target_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+target_os=$*
+IFS=$ac_save_IFS
+case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
+
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+test -n "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+
+
+
+
+
+
+
+# Check whether --with-gcc was given.
+if test "${with_gcc+set}" = set; then :
+ withval=$with_gcc;
+fi
+
+ V_CCOPT="-O"
+ V_INCLS=""
+ if test "${srcdir}" != "." ; then
+ V_INCLS="-I\$(srcdir)"
+ fi
+ if test "${CFLAGS+set}" = set; then
+ LBL_CFLAGS="$CFLAGS"
+ fi
+ if test -z "$CC" ; then
+ case "$host_os" in
+
+ bsdi*)
+ # Extract the first word of "shlicc2", so it can be a program name with args.
+set dummy shlicc2; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_SHLICC2+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$SHLICC2"; then
+ ac_cv_prog_SHLICC2="$SHLICC2" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_SHLICC2="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_SHLICC2" && ac_cv_prog_SHLICC2="no"
+fi
+fi
+SHLICC2=$ac_cv_prog_SHLICC2
+if test -n "$SHLICC2"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SHLICC2" >&5
+$as_echo "$SHLICC2" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test $SHLICC2 = yes ; then
+ CC=shlicc2
+ export CC
+ fi
+ ;;
+ esac
+ fi
+ if test -z "$CC" -a "$with_gcc" = no ; then
+ CC=cc
+ export CC
+ fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5 ; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5 ; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5 ; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5 ; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5 ; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
