| Kernel driver ds2482 | |
| ==================== | |
| Supported chips: | |
| * Maxim DS2482-100, Maxim DS2482-800 | |
| Prefix: 'ds2482' | |
| Addresses scanned: None | |
| Datasheets: | |
| http://datasheets.maxim-ic.com/en/ds/DS2482-100.pdf | |
| http://datasheets.maxim-ic.com/en/ds/DS2482-800.pdf | |
| Author: Ben Gardner <bgardner@wabtec.com> | |
| Description | |
| ----------- | |
| The Maxim/Dallas Semiconductor DS2482 is a I2C device that provides | |
| one (DS2482-100) or eight (DS2482-800) 1-wire busses. | |
| General Remarks | |
| --------------- | |
| Valid addresses are 0x18, 0x19, 0x1a, and 0x1b. | |
| However, the device cannot be detected without writing to the i2c bus, so no | |
| detection is done. You should instantiate the device explicitly. | |
| $ modprobe ds2482 | |
| $ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device | |