| config SND_SOC_FSL_SAI | |
| tristate | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| config SND_SOC_FSL_SSI | |
| tristate | |
| config SND_SOC_FSL_ASRC | |
| tristate | |
| config SND_SOC_FSL_ESAI | |
| tristate | |
| config SND_SOC_FSL_SPDIF | |
| tristate | |
| config SND_SOC_FSL_HDMI | |
| tristate | |
| config SND_SOC_FSL_UTILS | |
| tristate | |
| menuconfig SND_POWERPC_SOC | |
| tristate "SoC Audio for Freescale PowerPC CPUs" | |
| depends on FSL_SOC || PPC_MPC52xx | |
| help | |
| Say Y or M if you want to add support for codecs attached to | |
| the PowerPC CPUs. | |
| if SND_POWERPC_SOC | |
| config SND_MPC52xx_DMA | |
| tristate | |
| config SND_SOC_POWERPC_DMA | |
| tristate | |
| config SND_SOC_MPC8610_HPCD | |
| tristate "ALSA SoC support for the Freescale MPC8610 HPCD board" | |
| # I2C is necessary for the CS4270 driver | |
| depends on MPC8610_HPCD && I2C | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_FSL_UTILS | |
| select SND_SOC_POWERPC_DMA | |
| select SND_SOC_CS4270 | |
| select SND_SOC_CS4270_VD33_ERRATA | |
| default y if MPC8610_HPCD | |
| help | |
| Say Y if you want to enable audio on the Freescale MPC8610 HPCD. | |
| config SND_SOC_P1022_DS | |
| tristate "ALSA SoC support for the Freescale P1022 DS board" | |
| # I2C is necessary for the WM8776 driver | |
| depends on P1022_DS && I2C | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_FSL_UTILS | |
| select SND_SOC_POWERPC_DMA | |
| select SND_SOC_WM8776 | |
| default y if P1022_DS | |
| help | |
| Say Y if you want to enable audio on the Freescale P1022 DS board. | |
| This will also include the Wolfson Microelectronics WM8776 codec | |
| driver. | |
| config SND_SOC_P1022_RDK | |
| tristate "ALSA SoC support for the Freescale / iVeia P1022 RDK board" | |
| # I2C is necessary for the WM8960 driver | |
| depends on P1022_RDK && I2C | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_FSL_UTILS | |
| select SND_SOC_POWERPC_DMA | |
| select SND_SOC_WM8960 | |
| default y if P1022_RDK | |
| help | |
| Say Y if you want to enable audio on the Freescale / iVeia | |
| P1022 RDK board. This will also include the Wolfson | |
| Microelectronics WM8960 codec driver. | |
| config SND_SOC_MPC5200_I2S | |
| tristate "Freescale MPC5200 PSC in I2S mode driver" | |
| depends on PPC_MPC52xx && PPC_BESTCOMM | |
| select SND_MPC52xx_DMA | |
| select PPC_BESTCOMM_GEN_BD | |
| help | |
| Say Y here to support the MPC5200 PSCs in I2S mode. | |
| config SND_SOC_MPC5200_AC97 | |
| tristate "Freescale MPC5200 PSC in AC97 mode driver" | |
| depends on PPC_MPC52xx && PPC_BESTCOMM | |
| select SND_SOC_AC97_BUS | |
| select SND_MPC52xx_DMA | |
| select PPC_BESTCOMM_GEN_BD | |
| help | |
| Say Y here to support the MPC5200 PSCs in AC97 mode. | |
| config SND_MPC52xx_SOC_PCM030 | |
| tristate "SoC AC97 Audio support for Phytec pcm030 and WM9712" | |
| depends on PPC_MPC5200_SIMPLE | |
| select SND_SOC_MPC5200_AC97 | |
| select SND_SOC_WM9712 | |
| help | |
| Say Y if you want to add support for sound on the Phytec pcm030 | |
| baseboard. | |
| config SND_MPC52xx_SOC_EFIKA | |
| tristate "SoC AC97 Audio support for bbplan Efika and STAC9766" | |
| depends on PPC_EFIKA | |
| select SND_SOC_MPC5200_AC97 | |
| select SND_SOC_STAC9766 | |
| help | |
| Say Y if you want to add support for sound on the Efika. | |
| endif # SND_POWERPC_SOC | |
| menuconfig SND_IMX_SOC | |
| tristate "SoC Audio for Freescale i.MX CPUs" | |
| depends on ARCH_MXC | |
| help | |
| Say Y or M if you want to add support for codecs attached to | |
| the i.MX CPUs. | |
| if SND_IMX_SOC | |
| config SND_SOC_IMX_SSI | |
| tristate | |
| config SND_SOC_IMX_PCM_FIQ | |
| bool | |
| select FIQ | |
| config SND_SOC_IMX_PCM_DMA | |
| bool | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| config SND_SOC_IMX_HDMI_DMA | |
| bool | |
| select SND_SOC_GENERIC_DMAENGINE_PCM | |
| select SND_SOC_IMX_PCM_DMA | |
| config SND_SOC_IMX_AUDMUX | |
| tristate | |
| config SND_MXC_SOC_WM1133_EV1 | |
| tristate "Audio on the i.MX31ADS with WM1133-EV1 fitted" | |
| depends on MACH_MX31ADS_WM1133_EV1 | |
| select SND_SOC_WM8350 | |
| select SND_SOC_IMX_PCM_FIQ | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_IMX_SSI | |
| help | |
| Enable support for audio on the i.MX31ADS with the WM1133-EV1 | |
| PMIC board with WM8835x fitted. | |
| config SND_SOC_MX27VIS_AIC32X4 | |
| tristate "SoC audio support for Visstrim M10 boards" | |
| depends on MACH_IMX27_VISSTRIM_M10 && I2C | |
| select SND_SOC_TLV320AIC32X4 | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_IMX_SSI | |
| help | |
| Say Y if you want to add support for SoC audio on Visstrim SM10 | |
| board with TLV320AIC32X4 codec. | |
| config SND_SOC_PHYCORE_AC97 | |
| tristate "SoC Audio support for Phytec phyCORE (and phyCARD) boards" | |
| depends on MACH_PCM043 || MACH_PCA100 | |
| select SND_SOC_AC97_BUS | |
| select SND_SOC_WM9712 | |
| select SND_SOC_IMX_PCM_FIQ | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_IMX_SSI | |
| help | |
| Say Y if you want to add support for SoC audio on Phytec phyCORE | |
| and phyCARD boards in AC97 mode | |
| config SND_SOC_EUKREA_TLV320 | |
| tristate "Eukrea TLV320" | |
| depends on MACH_EUKREA_MBIMX27_BASEBOARD \ | |
| || MACH_EUKREA_MBIMXSD25_BASEBOARD \ | |
| || MACH_EUKREA_MBIMXSD35_BASEBOARD \ | |
| || MACH_EUKREA_MBIMXSD51_BASEBOARD | |
| depends on I2C | |
| select SND_SOC_TLV320AIC23 | |
| select SND_SOC_IMX_PCM_FIQ | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_IMX_SSI | |
| help | |
| Enable I2S based access to the TLV320AIC23B codec attached | |
| to the SSI interface | |
| config SND_SOC_IMX_CS42888 | |
| tristate "SoC Audio support for i.MX boards with cs42888" | |
| depends on OF && I2C | |
| select SND_SOC_CS42888 | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_FSL_ESAI | |
| select SND_SOC_FSL_UTILS | |
| help | |
| SoC Audio support for i.MX boards with cs42888 | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| a cs42888 codec. | |
| config SND_SOC_IMX_WM8962 | |
| tristate "SoC Audio support for i.MX boards with wm8962" | |
| depends on OF && I2C | |
| select SND_SOC_WM8962 | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_FSL_SAI | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_FSL_UTILS | |
| select SND_KCTL_JACK | |
| help | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| a wm8962 codec. | |
| config SND_SOC_IMX_WM8962_ANDROID | |
| tristate "SoC Audio support for i.MX boards with wm8962 in android" | |
| depends on SND_SOC_IMX_WM8962=y | |
| help | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| a wm8962 codec in android. | |
| config SND_SOC_IMX_SGTL5000 | |
| tristate "SoC Audio support for i.MX boards with sgtl5000" | |
| depends on OF && I2C | |
| select SND_SOC_SGTL5000 | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_FSL_SAI | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_FSL_UTILS | |
| help | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| a sgtl5000 codec. | |
| config SND_SOC_IMX_MQS | |
| tristate "SoC Audio support for i.MX boards with MQS" | |
| depends on OF | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_FSL_SAI | |
| select SND_SOC_FSL_MQS | |
| select SND_SOC_FSL_UTILS | |
| config SND_SOC_IMX_SPDIF | |
| tristate "SoC Audio support for i.MX boards with S/PDIF" | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_FSL_SPDIF | |
| select SND_SOC_SPDIF | |
| select REGMAP_MMIO | |
| help | |
| SoC Audio support for i.MX boards with S/PDIF | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| a S/DPDIF. | |
| config SND_SOC_IMX_MC13783 | |
| tristate "SoC Audio support for I.MX boards with mc13783" | |
| depends on MFD_MC13783 | |
| select SND_SOC_IMX_SSI | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_MC13783 | |
| select SND_SOC_IMX_PCM_DMA | |
| config SND_SOC_IMX_HDMI | |
| tristate "SoC Audio support for i.MX boards with HDMI port" | |
| depends on MFD_MXC_HDMI | |
| select SND_SOC_IMX_HDMI_DMA | |
| select SND_SOC_FSL_HDMI | |
| select SND_SOC_OMAP_HDMI_CODEC | |
| help | |
| SoC Audio support for i.MX boards with HDMI audio | |
| Say Y if you want to add support for SoC audio on an i.MX board with | |
| IMX HDMI. | |
| config SND_SOC_IMX_SI476X | |
| tristate "SoC Audio support for i.MX boards with si476x" | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_IMX_AUDMUX | |
| select SND_SOC_FSL_SSI | |
| select SND_SOC_FSL_UTILS | |
| select SND_SOC_SI476X | |
| help | |
| SoC Audio support for i.MX boards with SI476x | |
| Say Y if you want to add support for Soc audio for the AMFM Tuner chip | |
| SI476x module. | |
| config SND_SOC_IMX_TFA9890 | |
| tristate "SoC Audio support for i.MX boards with tfa9890" | |
| select SND_SOC_FSL_SAI | |
| select SND_SOC_TFA9890 | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_FSL_UTILS | |
| help | |
| SoC Audio support for i.MX boards with TFA9890 module | |
| Say Y if you want to add support for Soc audio for the | |
| TFA9890 module. | |
| config SND_SOC_IMX_AUDIO | |
| tristate "SoC Audio support for i.MX boards with tfa9890/cs48l10/wm8940" | |
| select SND_SOC_FSL_SAI | |
| select SND_SOC_TFA9890 | |
| select SND_SOC_WM8940 | |
| select SND_SOC_CS48L10 | |
| select SND_SOC_IMX_PCM_DMA | |
| select SND_SOC_FSL_UTILS | |
| help | |
| SoC Audio support for i.MX boards with TFA9890/CS48L10/WM8940 modules | |
| Say Y if you want to add support for SoC audio for the | |
| TFA9890/CS48L10/WM8940 module. | |
| endif # SND_IMX_SOC |