| # Makefile.in generated by automake 1.11.1 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, |
| # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, |
| # Inc. |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # Makefile for popt library. |
| |
| |
| |
| |
| |
| VPATH = @srcdir@ |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| target_triplet = @target@ |
| noinst_PROGRAMS = test1$(EXEEXT) test2$(EXEEXT) tdict$(EXEEXT) |
| @HAVE_LD_VERSION_SCRIPT_TRUE@am__append_1 = -Wl,--version-script=$(top_srcdir)/libpopt.vers |
| subdir = . |
| DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \ |
| $(noinst_HEADERS) $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \ |
| $(srcdir)/Makefile.in $(srcdir)/config.h.in \ |
| $(srcdir)/popt.pc.in $(srcdir)/popt.spec.in \ |
| $(srcdir)/test-poptrc.in $(top_srcdir)/configure ABOUT-NLS \ |
| COPYING config.guess config.rpath config.sub depcomp \ |
| install-sh ltmain.sh missing |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \ |
| $(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/lib-ld.m4 \ |
| $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ |
| $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ |
| $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ |
| $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ |
| $(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \ |
| $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = config.h |
| CONFIG_CLEAN_FILES = Doxyfile popt.pc popt.spec test-poptrc |
| CONFIG_CLEAN_VPATH_FILES = |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__installdirs = "$(DESTDIR)$(usrlibdir)" "$(DESTDIR)$(man3dir)" \ |
| "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)" |
| LTLIBRARIES = $(usrlib_LTLIBRARIES) |
| libpopt_la_LIBADD = |
| am_libpopt_la_OBJECTS = popt.lo poptparse.lo poptconfig.lo popthelp.lo \ |
| poptint.lo |
| libpopt_la_OBJECTS = $(am_libpopt_la_OBJECTS) |
| libpopt_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \ |
| $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ |
| $(libpopt_la_LDFLAGS) $(LDFLAGS) -o $@ |
| PROGRAMS = $(noinst_PROGRAMS) |
| am_tdict_OBJECTS = tdict.$(OBJEXT) |
| tdict_OBJECTS = $(am_tdict_OBJECTS) |
| tdict_DEPENDENCIES = $(usrlib_LTLIBRARIES) |
| tdict_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(tdict_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| am_test1_OBJECTS = test1.$(OBJEXT) |
| test1_OBJECTS = $(am_test1_OBJECTS) |
| test1_DEPENDENCIES = $(usrlib_LTLIBRARIES) |
| test1_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(test1_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| am_test2_OBJECTS = test2.$(OBJEXT) |
| test2_OBJECTS = $(am_test2_OBJECTS) |
| test2_DEPENDENCIES = $(usrlib_LTLIBRARIES) |
| test2_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(test2_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| SCRIPTS = $(noinst_SCRIPTS) |
| DEFAULT_INCLUDES = -I.@am__isrc@ |
| depcomp = $(SHELL) $(top_srcdir)/depcomp |
| am__depfiles_maybe = depfiles |
| am__mv = mv -f |
| COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
| $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ |
| $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| CCLD = $(CC) |
| LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ |
| --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ |
| $(LDFLAGS) -o $@ |
| SOURCES = $(libpopt_la_SOURCES) $(tdict_SOURCES) $(test1_SOURCES) \ |
| $(test2_SOURCES) |
| DIST_SOURCES = $(libpopt_la_SOURCES) $(tdict_SOURCES) $(test1_SOURCES) \ |
| $(test2_SOURCES) |
| RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ |
| html-recursive info-recursive install-data-recursive \ |
| install-dvi-recursive install-exec-recursive \ |
| install-html-recursive install-info-recursive \ |
| install-pdf-recursive install-ps-recursive install-recursive \ |
| installcheck-recursive installdirs-recursive pdf-recursive \ |
| ps-recursive uninstall-recursive |
| man3dir = $(mandir)/man3 |
| NROFF = nroff |
| MANS = $(man_MANS) |
| DATA = $(pkgconfig_DATA) |
| HEADERS = $(include_HEADERS) $(noinst_HEADERS) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ |
| $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ |
| distdir dist dist-all distcheck |
| ETAGS = etags |
| CTAGS = ctags |
| am__tty_colors = \ |
| red=; grn=; lgn=; blu=; std= |
| DIST_SUBDIRS = $(SUBDIRS) |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| { test ! -d "$(distdir)" \ |
| || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -fr "$(distdir)"; }; } |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| DIST_ARCHIVES = $(distdir).tar.gz |
| GZIP_ENV = --best |
| distuninstallcheck_listfiles = find . -type f -print |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = @ACLOCAL@ |
| AMTAR = @AMTAR@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = @DEFS@ |
| DEPDIR = @DEPDIR@ |
| DSYMUTIL = @DSYMUTIL@ |
| DUMPBIN = @DUMPBIN@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| FGREP = @FGREP@ |
| GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ |
| GMSGFMT = @GMSGFMT@ |
| GMSGFMT_015 = @GMSGFMT_015@ |
| GREP = @GREP@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INTLLIBS = @INTLLIBS@ |
| INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ |
| LD = @LD@ |
| LDFLAGS = @LDFLAGS@ |
| LIBICONV = @LIBICONV@ |
| LIBINTL = @LIBINTL@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LIBTOOL = @LIBTOOL@ |
| LIPO = @LIPO@ |
| LN_S = @LN_S@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBINTL = @LTLIBINTL@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| LT_AGE = @LT_AGE@ |
| LT_CURRENT = @LT_CURRENT@ |
| LT_REVISION = @LT_REVISION@ |
| MAINT = @MAINT@ |
| MAKEINFO = @MAKEINFO@ |
| MKDIR_P = @MKDIR_P@ |
| MSGFMT = @MSGFMT@ |
| MSGFMT_015 = @MSGFMT_015@ |
| MSGMERGE = @MSGMERGE@ |
| NM = @NM@ |
| NMEDIT = @NMEDIT@ |
| OBJDUMP = @OBJDUMP@ |
| OBJEXT = @OBJEXT@ |
| OTOOL = @OTOOL@ |
| OTOOL64 = @OTOOL64@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| POPT_PKGCONFIG_LIBS = @POPT_PKGCONFIG_LIBS@ |
| POPT_SOURCE_PATH = @POPT_SOURCE_PATH@ |
| POSUB = @POSUB@ |
| RANLIB = @RANLIB@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| TARGET = @TARGET@ |
| U = @U@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| XGETTEXT = @XGETTEXT@ |
| XGETTEXT_015 = @XGETTEXT_015@ |
| XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_CC = @ac_ct_CC@ |
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| localedir = @localedir@ |
| localstatedir = @localstatedir@ |
| lt_ECHO = @lt_ECHO@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| subdirs = @subdirs@ |
| sysconfdir = @sysconfdir@ |
| target = @target@ |
| target_alias = @target_alias@ |
| target_cpu = @target_cpu@ |
| target_os = @target_os@ |
| target_vendor = @target_vendor@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| AUTOMAKE_OPTIONS = 1.4 foreign |
| LINT = splint |
| MCCABE = pmccabe |
| EXTRA_DIST = config.rpath lookup3.c autogen.sh CHANGES $(man_MANS) \ |
| m4/Makefile.in \ |
| footer_no_timestamp.html libpopt.vers \ |
| testit.sh test-poptrc \ |
| popt.xcodeproj/project.pbxproj \ |
| popt.ps |
| |
| SUBDIRS = po . auto |
| AM_CPPFLAGS = -I. -I$(top_srcdir) |
| noinst_HEADERS = poptint.h system.h |
| test1_SOURCES = test1.c |
| test1_LDFLAGS = |
| test1_LDADD = $(usrlib_LTLIBRARIES) |
| test2_SOURCES = test2.c |
| test2_LDFLAGS = |
| test2_LDADD = $(usrlib_LTLIBRARIES) |
| #test3_SOURCES = test3.c |
| #test3_LDFLAGS = |
| #test3_LDADD = $(usrlib_LTLIBRARIES) |
| tdict_SOURCES = tdict.c |
| tdict_LDFLAGS = |
| tdict_LDADD = $(usrlib_LTLIBRARIES) |
| noinst_SCRIPTS = testit.sh |
| TESTS_ENVIRONMENT = \ |
| test1="$(top_builddir)/test1" |
| |
| TESTS = $(top_srcdir)/testit.sh |
| include_HEADERS = popt.h |
| usrlibdir = $(libdir) |
| usrlib_LTLIBRARIES = libpopt.la |
| libpopt_la_SOURCES = popt.c poptparse.c poptconfig.c popthelp.c poptint.c |
| libpopt_la_LDFLAGS = -no-undefined @LTLIBINTL@ @LTLIBICONV@ \ |
| $(am__append_1) |
| pkgconfigdir = $(prefix)/lib/pkgconfig |
| pkgconfig_DATA = popt.pc |
| man_MANS = popt.3 |
| BUILT_SOURCES = popt.pc # popt.lcd |
| |
| #.PHONY: lcov-upload |
| #lcov-upload: lcov |
| # rsync -rvz -e ssh --delete lcov/* ??? |
| ACLOCAL_AMFLAGS = -I m4 |
| all: $(BUILT_SOURCES) config.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .c .lo .o .obj |
| am--refresh: |
| @: |
| $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| .PRECIOUS: Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| config.h: stamp-h1 |
| @if test ! -f $@; then \ |
| rm -f stamp-h1; \ |
| $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ |
| else :; fi |
| |
| stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status config.h |
| $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) |
| ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
| rm -f stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f config.h stamp-h1 |
| Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| popt.pc: $(top_builddir)/config.status $(srcdir)/popt.pc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| popt.spec: $(top_builddir)/config.status $(srcdir)/popt.spec.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| test-poptrc: $(top_builddir)/config.status $(srcdir)/test-poptrc.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| install-usrlibLTLIBRARIES: $(usrlib_LTLIBRARIES) |
| @$(NORMAL_INSTALL) |
| test -z "$(usrlibdir)" || $(MKDIR_P) "$(DESTDIR)$(usrlibdir)" |
| @list='$(usrlib_LTLIBRARIES)'; test -n "$(usrlibdir)" || list=; \ |
| list2=; for p in $$list; do \ |
| if test -f $$p; then \ |
| list2="$$list2 $$p"; \ |
| else :; fi; \ |
| done; \ |
| test -z "$$list2" || { \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(usrlibdir)'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(usrlibdir)"; \ |
| } |
| |
| uninstall-usrlibLTLIBRARIES: |
| @$(NORMAL_UNINSTALL) |
| @list='$(usrlib_LTLIBRARIES)'; test -n "$(usrlibdir)" || list=; \ |
| for p in $$list; do \ |
| $(am__strip_dir) \ |
| echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(usrlibdir)/$$f'"; \ |
| $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(usrlibdir)/$$f"; \ |
| done |
| |
| clean-usrlibLTLIBRARIES: |
| -test -z "$(usrlib_LTLIBRARIES)" || rm -f $(usrlib_LTLIBRARIES) |
| @list='$(usrlib_LTLIBRARIES)'; for p in $$list; do \ |
| dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ |
| test "$$dir" != "$$p" || dir=.; \ |
| echo "rm -f \"$${dir}/so_locations\""; \ |
| rm -f "$${dir}/so_locations"; \ |
| done |
| libpopt.la: $(libpopt_la_OBJECTS) $(libpopt_la_DEPENDENCIES) |
| $(libpopt_la_LINK) -rpath $(usrlibdir) $(libpopt_la_OBJECTS) $(libpopt_la_LIBADD) $(LIBS) |
| |
| clean-noinstPROGRAMS: |
| @list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list || exit $$?; \ |
| test -n "$(EXEEXT)" || exit 0; \ |
| list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \ |
| echo " rm -f" $$list; \ |
| rm -f $$list |
| tdict$(EXEEXT): $(tdict_OBJECTS) $(tdict_DEPENDENCIES) |
| @rm -f tdict$(EXEEXT) |
| $(tdict_LINK) $(tdict_OBJECTS) $(tdict_LDADD) $(LIBS) |
| test1$(EXEEXT): $(test1_OBJECTS) $(test1_DEPENDENCIES) |
| @rm -f test1$(EXEEXT) |
| $(test1_LINK) $(test1_OBJECTS) $(test1_LDADD) $(LIBS) |
| test2$(EXEEXT): $(test2_OBJECTS) $(test2_DEPENDENCIES) |
| @rm -f test2$(EXEEXT) |
| $(test2_LINK) $(test2_OBJECTS) $(test2_LDADD) $(LIBS) |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/popt.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/poptconfig.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/popthelp.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/poptint.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/poptparse.Plo@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tdict.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test1.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test2.Po@am__quote@ |
| |
| .c.o: |
| @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< |
| @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(COMPILE) -c $< |
| |
| .c.obj: |
| @am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` |
| @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` |
| |
| .c.lo: |
| @am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< |
| @am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< |
| |
| mostlyclean-libtool: |
| -rm -f *.lo |
| |
| clean-libtool: |
| -rm -rf .libs _libs |
| |
| distclean-libtool: |
| -rm -f libtool config.lt |
| install-man3: $(man_MANS) |
| @$(NORMAL_INSTALL) |
| test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)" |
| @list=''; test -n "$(man3dir)" || exit 0; \ |
| { for i in $$list; do echo "$$i"; done; \ |
| l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ |
| sed -n '/\.3[a-z]*$$/p'; \ |
| } | while read p; do \ |
| if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; echo "$$p"; \ |
| done | \ |
| sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ |
| -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ |
| sed 'N;N;s,\n, ,g' | { \ |
| list=; while read file base inst; do \ |
| if test "$$base" = "$$inst"; then list="$$list $$file"; else \ |
| echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \ |
| $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \ |
| fi; \ |
| done; \ |
| for i in $$list; do echo "$$i"; done | $(am__base_list) | \ |
| while read files; do \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \ |
| done; } |
| |
| uninstall-man3: |
| @$(NORMAL_UNINSTALL) |
| @list=''; test -n "$(man3dir)" || exit 0; \ |
| files=`{ for i in $$list; do echo "$$i"; done; \ |
| l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ |
| sed -n '/\.3[a-z]*$$/p'; \ |
| } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \ |
| -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ |
| test -z "$$files" || { \ |
| echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(man3dir)" && rm -f $$files; } |
| install-pkgconfigDATA: $(pkgconfig_DATA) |
| @$(NORMAL_INSTALL) |
| test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ |
| done |
| |
| uninstall-pkgconfigDATA: |
| @$(NORMAL_UNINSTALL) |
| @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| test -n "$$files" || exit 0; \ |
| echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files |
| install-includeHEADERS: $(include_HEADERS) |
| @$(NORMAL_INSTALL) |
| test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)" |
| @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ |
| done |
| |
| uninstall-includeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| test -n "$$files" || exit 0; \ |
| echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(includedir)" && rm -f $$files |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run `make' without going through this Makefile. |
| # To change the values of `make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in `config.status', edit `config.status' |
| # (which will cause the Makefiles to be regenerated when you run `make'); |
| # (2) otherwise, pass the desired values on the `make' command line. |
| $(RECURSIVE_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| $(RECURSIVE_CLEAN_TARGETS): |
| @fail= failcom='exit 1'; \ |
| for f in x $$MAKEFLAGS; do \ |
| case $$f in \ |
| *=* | --[!k]*);; \ |
| *k*) failcom='fail=yes';; \ |
| esac; \ |
| done; \ |
| dot_seen=no; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| rev=''; for subdir in $$list; do \ |
| if test "$$subdir" = "."; then :; else \ |
| rev="$$subdir $$rev"; \ |
| fi; \ |
| done; \ |
| rev="$$rev ."; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| for subdir in $$rev; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done && test -z "$$fail" |
| tags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ |
| done |
| ctags-recursive: |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ |
| done |
| |
| ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) |
| list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| mkid -fID $$unique |
| tags: TAGS |
| |
| TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: CTAGS |
| CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ |
| $(TAGS_FILES) $(LISP) |
| list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | \ |
| $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in files) print i; }; }'`; \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| |
| check-TESTS: $(TESTS) |
| @failed=0; all=0; xfail=0; xpass=0; skip=0; \ |
| srcdir=$(srcdir); export srcdir; \ |
| list=' $(TESTS) '; \ |
| $(am__tty_colors); \ |
| if test -n "$$list"; then \ |
| for tst in $$list; do \ |
| if test -f ./$$tst; then dir=./; \ |
| elif test -f $$tst; then dir=; \ |
| else dir="$(srcdir)/"; fi; \ |
| if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$tst[\ \ ]*) \ |
| xpass=`expr $$xpass + 1`; \ |
| failed=`expr $$failed + 1`; \ |
| col=$$red; res=XPASS; \ |
| ;; \ |
| *) \ |
| col=$$grn; res=PASS; \ |
| ;; \ |
| esac; \ |
| elif test $$? -ne 77; then \ |
| all=`expr $$all + 1`; \ |
| case " $(XFAIL_TESTS) " in \ |
| *[\ \ ]$$tst[\ \ ]*) \ |
| xfail=`expr $$xfail + 1`; \ |
| col=$$lgn; res=XFAIL; \ |
| ;; \ |
| *) \ |
| failed=`expr $$failed + 1`; \ |
| col=$$red; res=FAIL; \ |
| ;; \ |
| esac; \ |
| else \ |
| skip=`expr $$skip + 1`; \ |
| col=$$blu; res=SKIP; \ |
| fi; \ |
| echo "$${col}$$res$${std}: $$tst"; \ |
| done; \ |
| if test "$$all" -eq 1; then \ |
| tests="test"; \ |
| All=""; \ |
| else \ |
| tests="tests"; \ |
| All="All "; \ |
| fi; \ |
| if test "$$failed" -eq 0; then \ |
| if test "$$xfail" -eq 0; then \ |
| banner="$$All$$all $$tests passed"; \ |
| else \ |
| if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ |
| banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ |
| fi; \ |
| else \ |
| if test "$$xpass" -eq 0; then \ |
| banner="$$failed of $$all $$tests failed"; \ |
| else \ |
| if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ |
| banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ |
| fi; \ |
| fi; \ |
| dashes="$$banner"; \ |
| skipped=""; \ |
| if test "$$skip" -ne 0; then \ |
| if test "$$skip" -eq 1; then \ |
| skipped="($$skip test was not run)"; \ |
| else \ |
| skipped="($$skip tests were not run)"; \ |
| fi; \ |
| test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$skipped"; \ |
| fi; \ |
| report=""; \ |
| if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ |
| report="Please report to $(PACKAGE_BUGREPORT)"; \ |
| test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ |
| dashes="$$report"; \ |
| fi; \ |
| dashes=`echo "$$dashes" | sed s/./=/g`; \ |
| if test "$$failed" -eq 0; then \ |
| echo "$$grn$$dashes"; \ |
| else \ |
| echo "$$red$$dashes"; \ |
| fi; \ |
| echo "$$banner"; \ |
| test -z "$$skipped" || echo "$$skipped"; \ |
| test -z "$$report" || echo "$$report"; \ |
| echo "$$dashes$$std"; \ |
| test "$$failed" -eq 0; \ |
| else :; fi |
| |
| distdir: $(DISTFILES) |
| @list='$(MANS)'; if test -n "$$list"; then \ |
| list=`for p in $$list; do \ |
| if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ |
| if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \ |
| if test -n "$$list" && \ |
| grep 'ab help2man is required to generate this page' $$list >/dev/null; then \ |
| echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \ |
| grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/ /' >&2; \ |
| echo " to fix them, install help2man, remove and regenerate the man pages;" >&2; \ |
| echo " typically \`make maintainer-clean' will remove them" >&2; \ |
| exit 1; \ |
| else :; fi; \ |
| else :; fi |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 |
| $(am__remove_distdir) |
| |
| dist-lzma: distdir |
| tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma |
| $(am__remove_distdir) |
| |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz |
| $(am__remove_distdir) |
| |
| dist-tarZ: distdir |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__remove_distdir) |
| |
| dist-shar: distdir |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__remove_distdir) |
| |
| dist dist-all: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lzma*) \ |
| lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir); chmod a+w $(distdir) |
| mkdir $(distdir)/_build |
| mkdir $(distdir)/_inst |
| chmod a-w $(distdir) |
| test -d $(distdir)/_build || exit 0; \ |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build \ |
| && ../configure --srcdir=.. --prefix="$$dc_install_base" \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @$(am__cd) '$(distuninstallcheck_dir)' \ |
| && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| $(MAKE) $(AM_MAKEFLAGS) check-TESTS |
| check: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) check-recursive |
| all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(MANS) $(DATA) \ |
| $(HEADERS) config.h |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(usrlibdir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: $(BUILT_SOURCES) |
| $(MAKE) $(AM_MAKEFLAGS) install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| `test -z '$(STRIP)' || \ |
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES) |
| clean: clean-recursive |
| |
| clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \ |
| clean-usrlibLTLIBRARIES mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf ./$(DEPDIR) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-compile distclean-generic \ |
| distclean-hdr distclean-libtool distclean-local distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-includeHEADERS install-man \ |
| install-pkgconfigDATA install-usrlibLTLIBRARIES |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: install-man3 |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -rf ./$(DEPDIR) |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic \ |
| mostlyclean-libtool |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-includeHEADERS uninstall-man \ |
| uninstall-pkgconfigDATA uninstall-usrlibLTLIBRARIES |
| |
| uninstall-man: uninstall-man3 |
| |
| .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \ |
| check-am ctags-recursive install install-am install-strip \ |
| tags-recursive |
| |
| .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ |
| all all-am am--refresh check check-TESTS check-am clean \ |
| clean-generic clean-libtool clean-noinstPROGRAMS \ |
| clean-usrlibLTLIBRARIES ctags ctags-recursive dist dist-all \ |
| dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ dist-xz \ |
| dist-zip distcheck distclean distclean-compile \ |
| distclean-generic distclean-hdr distclean-libtool \ |
| distclean-local distclean-tags distcleancheck distdir \ |
| distuninstallcheck dvi dvi-am html html-am info info-am \ |
| install install-am install-data install-data-am install-dvi \ |
| install-dvi-am install-exec install-exec-am install-html \ |
| install-html-am install-includeHEADERS install-info \ |
| install-info-am install-man install-man3 install-pdf \ |
| install-pdf-am install-pkgconfigDATA install-ps install-ps-am \ |
| install-strip install-usrlibLTLIBRARIES installcheck \ |
| installcheck-am installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-compile \ |
| mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ |
| tags tags-recursive uninstall uninstall-am \ |
| uninstall-includeHEADERS uninstall-man uninstall-man3 \ |
| uninstall-pkgconfigDATA uninstall-usrlibLTLIBRARIES |
| |
| |
| distclean-local: |
| rm -rf .ccache |
| |
| .PHONY: updatepo |
| updatepo: |
| rsync -Lrtvz translationproject.org::tp/latest/popt/ po |
| |
| popt.lcd: Makefile.am ${libpopt_la_SOURCES} ${include_HEADERS} ${noinst_HEADERS} |
| lclint -dump $@ ${libpopt_la_SOURCES} |
| |
| .PHONY: sources |
| sources: |
| @echo $(libpopt_la_SOURCES:%=popt/%) |
| |
| .PHONY: lint |
| lint: |
| $(LINT) ${DEFS} ${INCLUDES} test1.c ${libpopt_la_SOURCES} |
| |
| .PHONY: mccabe |
| mccabe: |
| $(MCCABE) $(libpopt_la_SOURCES) | sort -n -r | head -n 10 |
| |
| .PHONY: doxygen |
| doxygen: Doxyfile |
| rm -rf doxygen |
| mkdir -p doxygen |
| doxygen |
| |
| .PHONY: lcov-reset # run lcov from scratch, always |
| lcov-reset: |
| make lcov-run |
| make lcov-report |
| |
| .PHONY: lcov # run lcov from scratch if the dir is not there |
| lcov: |
| make lcov-reset |
| |
| .PHONY: lcov-run # reset run coverage tests |
| lcov-run: |
| @-rm -rf lcov |
| find . -name "*.gcda" -exec rm {} \; |
| make check |
| |
| .PHONY: lcov-report # generate report based on current coverage data |
| lcov-report: |
| mkdir lcov |
| lcov --directory . --capture --output-file lcov/lcov.info |
| lcov -l lcov/lcov.info | grep -v "`cd $(top_srcdir) && pwd`" | cut -d: -f1 > lcov/remove |
| lcov -r lcov/lcov.info `cat lcov/remove` > lcov/lcov.cleaned.info |
| rm lcov/remove |
| mv lcov/lcov.cleaned.info lcov/lcov.info |
| genhtml -t "$(PACKAGE_STRING)" -o lcov lcov/lcov.info |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |
