| # Modify as you see fit, note this is built into crda, | |
| # so if you change it here you will have to change crda.c | |
| REG_BIN?=/usr/lib/crda/regulatory.bin | |
| REG_GIT?=git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-regdb.git | |
| PREFIX ?= /usr/ | |
| MANDIR ?= $(PREFIX)/share/man/ | |
| SBINDIR ?= /sbin/ | |
| # Use a custom CRDA_UDEV_LEVEL when callling make install to | |
| # change your desired level for the udev regulatory.rules | |
| CRDA_UDEV_LEVEL?=85 | |
| UDEV_LEVEL=$(CRDA_UDEV_LEVEL)- | |
| # You can customize this if your distributions uses | |
| # a different location. | |
| UDEV_RULE_DIR?=/lib/udev/rules.d/ | |
| # If your distribution requires a custom pubkeys dir | |
| # you must update this variable to reflect where the | |
| # keys are put when building. For example you can run | |
| # with make PUBKEY_DIR=/usr/lib/crda/pubkeys | |
| PUBKEY_DIR?=pubkeys | |
| RUNTIME_PUBKEY_DIR?=/etc/wireless-regdb/pubkeys | |
| CFLAGS += -Wall -g | |
| all: all_noverify verify | |
| all_noverify: crda intersect regdbdump | |
| ifeq ($(USE_OPENSSL),1) | |
| CFLAGS += -DUSE_OPENSSL -DPUBKEY_DIR=\"$(RUNTIME_PUBKEY_DIR)\" `pkg-config --cflags openssl` | |
| LDLIBS += `pkg-config --libs openssl` | |
| reglib.o: keys-ssl.c | |
| else | |
| CFLAGS += $(GCRYPTCFLAGS) -DUSE_GCRYPT | |
| LDLIBS += $(GCRYPTLDFLAGS) -lgcrypt | |
| reglib.o: keys-gcrypt.c | |
| endif | |
| MKDIR ?= mkdir -p | |
| INSTALL ?= install | |
| ifdef NLLIBNAME | |
| NLLIBS += -lnl | |
| ifeq ($(NLLIBNAME),libnl-1) | |
| NL1FOUND := Y | |
| endif | |
| ifeq ($(NLLIBNAME),libnl-2.0) | |
| NL2FOUND := Y | |
| endif | |
| ifeq ($(NLLIBNAME),libnl-3.0) | |
| NL3FOUND := Y | |
| endif | |
| ifdef NLCFLAGS | |
| CFLAGS += $(NLCFLAGS) | |
| endif | |
| ifdef NLLDFLAGS | |
| LDFLAGS += $(NLLDFLAGS) | |
| endif | |
| else | |
| NL1FOUND := $(shell $(PKG_CONFIG) --atleast-version=1 libnl-1 && echo Y) | |
| NL2FOUND := $(shell $(PKG_CONFIG) --atleast-version=2 libnl-2.0 && echo Y) | |
| NL3FOUND := $(shell $(PKG_CONFIG) --atleast-version=3 libnl-3.0 && echo Y) | |
| ifeq ($(NL1FOUND),Y) | |
| NLLIBNAME = libnl-1 | |
| endif | |
| ifeq ($(NL2FOUND),Y) | |
| NLLIBNAME = libnl-2.0 | |
| endif | |
| ifeq ($(NL3FOUND),Y) | |
| NLLIBNAME = libnl-3.0 | |
| endif | |
| ifeq ($(NLLIBNAME),) | |
| $(error Cannot find development files for any supported version of libnl) | |
| endif | |
| NLLIBS += $(shell $(PKG_CONFIG) --libs $(NLLIBNAME)) | |
| CFLAGS += $(shell $(PKG_CONFIG) --cflags $(NLLIBNAME)) | |
| endif | |
| ifeq ($(NL2FOUND),Y) | |
| CFLAGS += -DCONFIG_LIBNL20 | |
| NLLIBS += -lnl-genl | |
| endif | |
| ifeq ($(NL3FOUND),Y) | |
| CFLAGS += -DCONFIG_LIBNL30 | |
| NLLIBS += -lnl-genl | |
| endif | |
| ifeq ($(V),1) | |
| Q= | |
| NQ=@true | |
| else | |
| Q=@ | |
| NQ=@echo | |
| endif | |
| $(REG_BIN): | |
| $(NQ) ' EXIST ' $(REG_BIN) | |
| $(NQ) | |
| $(NQ) ERROR: The file: $(REG_BIN) is missing. You need this in place in order | |
| $(NQ) to verify CRDA. You can get it from: | |
| $(NQ) | |
| $(NQ) $(REG_GIT) | |
| $(NQ) | |
| $(NQ) "Once cloned (no need to build) cp regulatory.bin to $(REG_BIN)" | |
| $(NQ) "Use \"make noverify\" to disable verification" | |
| $(NQ) | |
| $(Q) exit 1 | |
| keys-%.c: utils/key2pub.py $(wildcard $(PUBKEY_DIR)/*.pem) | |
| $(NQ) ' GEN ' $@ | |
| $(NQ) ' Trusted pubkeys:' $(wildcard $(PUBKEY_DIR)/*.pem) | |
| $(Q)./utils/key2pub.py --$* $(wildcard $(PUBKEY_DIR)/*.pem) $@ | |
| %.o: %.c regdb.h | |
| $(NQ) ' CC ' $@ | |
| $(Q)$(CC) -c $(CPPFLAGS) $(CFLAGS) -o $@ $< | |
| crda: reglib.o crda.o | |
| $(NQ) ' LD ' $@ | |
| $(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LDLIBS) $(NLLIBS) | |
| regdbdump: reglib.o regdbdump.o print-regdom.o | |
| $(NQ) ' LD ' $@ | |
| $(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LDLIBS) | |
| intersect: reglib.o intersect.o print-regdom.o | |
| $(NQ) ' LD ' $@ | |
| $(Q)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LDLIBS) | |
| verify: $(REG_BIN) regdbdump | |
| $(NQ) ' CHK $(REG_BIN)' | |
| $(Q)./regdbdump $(REG_BIN) >/dev/null | |
| %.gz: % | |
| @$(NQ) ' GZIP' $< | |
| $(Q)gzip < $< > $@ | |
| install: crda crda.8.gz regdbdump.8.gz | |
| $(NQ) ' INSTALL crda' | |
| $(Q)$(MKDIR) $(DESTDIR)/$(SBINDIR) | |
| $(Q)$(INSTALL) -m 755 -t $(DESTDIR)/$(SBINDIR) crda | |
| $(NQ) ' INSTALL regdbdump' | |
| $(Q)$(INSTALL) -m 755 -t $(DESTDIR)/$(SBINDIR) regdbdump | |
| $(NQ) ' INSTALL $(UDEV_LEVEL)regulatory.rules' | |
| $(Q)$(MKDIR) $(DESTDIR)/$(UDEV_RULE_DIR)/ | |
| @# This removes the old rule you may have, we were not | |
| @# putting it in the right place. | |
| $(Q)rm -f $(DESTDIR)/etc/udev/rules.d/regulatory.rules | |
| $(Q)sed 's:$$(SBINDIR):$(SBINDIR):' udev/regulatory.rules > udev/regulatory.rules.parsed | |
| $(Q)ln -sf regulatory.rules.parsed udev/$(UDEV_LEVEL)regulatory.rules | |
| $(Q)$(INSTALL) -m 644 -t \ | |
| $(DESTDIR)/$(UDEV_RULE_DIR)/ \ | |
| udev/$(UDEV_LEVEL)regulatory.rules | |
| $(NQ) ' INSTALL crda.8.gz' | |
| $(Q)$(MKDIR) $(DESTDIR)$(MANDIR)/man8/ | |
| $(Q)$(INSTALL) -m 644 -t $(DESTDIR)/$(MANDIR)/man8/ crda.8.gz | |
| $(NQ) ' INSTALL regdbdump.8.gz' | |
| $(Q)$(INSTALL) -m 644 -t $(DESTDIR)/$(MANDIR)/man8/ regdbdump.8.gz | |
| clean: | |
| $(Q)rm -f crda regdbdump intersect *.o *~ *.pyc keys-*.c *.gz \ | |
| udev/$(UDEV_LEVEL)regulatory.rules udev/regulatory.rules.parsed |