nspr-4.8.6/mozilla/nsprpub/pr/include/md/_reliantunix.h - nest-learning-thermostat/5.1.1/nspr - Git at Google

 /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
 /* ***** BEGIN LICENSE BLOCK *****
  * Version: MPL 1.1/GPL 2.0/LGPL 2.1
  *
  * The contents of this file are subject to the Mozilla Public License Version
  * 1.1 (the "License"); you may not use this file except in compliance with
  * the License. You may obtain a copy of the License at
  * http://www.mozilla.org/MPL/
  *
  * Software distributed under the License is distributed on an "AS IS" basis,
  * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
  * for the specific language governing rights and limitations under the
  * License.
  *
  * The Original Code is the Netscape Portable Runtime (NSPR).
  *
  * The Initial Developer of the Original Code is
  * Netscape Communications Corporation.
  * Portions created by the Initial Developer are Copyright (C) 1998-2000
  * the Initial Developer. All Rights Reserved.
  *
  * Contributor(s):
  *
  * Alternatively, the contents of this file may be used under the terms of
  * either the GNU General Public License Version 2 or later (the "GPL"), or
  * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
  * in which case the provisions of the GPL or the LGPL are applicable instead
  * of those above. If you wish to allow use of your version of this file only
  * under the terms of either the GPL or the LGPL, and not to allow others to
  * use your version of this file under the terms of the MPL, indicate your
  * decision by deleting the provisions above and replace them with the notice
  * and other provisions required by the GPL or the LGPL. If you do not delete
  * the provisions above, a recipient may use your version of this file under
  * the terms of any one of the MPL, the GPL or the LGPL.
  *
  * ***** END LICENSE BLOCK ***** */

 /*
  * reliantunix.h
  * 5/18/96 Taken from nec.h -- chrisk@netscape.com
  * 3/14/97 Modified for nspr20 -- chrisk@netscape.com
  */
 #ifndef nspr_reliantunix_defs_h___
 #define nspr_reliantunix_defs_h___

 /*
  * Internal configuration macros
  */

 #define PR_LINKER_ARCH	"sinix"
 #define _PR_SI_SYSNAME	"SINIX"
 #define _PR_SI_ARCHITECTURE "mips"
 #define PR_DLL_SUFFIX ".so"

 #define _PR_VMBASE		0x30000000
 #define _PR_STACK_VMBASE	0x50000000
 #define _MD_DEFAULT_STACK_SIZE	(2*65536L)
 #define _MD_MMAP_FLAGS		MAP_PRIVATE|MAP_FIXED

 #undef  HAVE_STACK_GROWING_UP
 #define HAVE_DLL
 #define USE_DLFCN
 #define NEED_STRFTIME_LOCK
 #define NEED_TIME_R
 #define HAVE_NETCONFIG
 #define HAVE_WEAK_IO_SYMBOLS
 #define HAVE_WEAK_MALLOC_SYMBOLS
 #define _PR_RECV_BROKEN /* recv doesn't work on Unix Domain Sockets */
 #define _PR_POLL_AVAILABLE
 #define _PR_USE_POLL
 #define _PR_STAT_HAS_ST_ATIM
 #define _PR_NO_LARGE_FILES

 /*
  * Mike Patnode indicated that it is possibly safe now to use context-switching
  * calls that do not change the signal mask, like setjmp vs. sigsetjmp.
  * So we'll use our homegrown, getcontext/setcontext-compatible stuff which
  * will save us the getcontext/setcontext system calls at each context switch.
  * It already works in FastTrack 2.01, so it should do it here :-)
  *  - chrisk 040497
  */
 #define USE_SETCXT /* temporarily disabled... */

 #include <ucontext.h>

 #ifdef USE_SETCXT
 /* use non-syscall machine language replacement */
 #define _GETCONTEXT		getcxt
 #define _SETCONTEXT		setcxt
 /* defined in os_ReliantUNIX.s */
 extern int getcxt(ucontext_t *);
 extern int setcxt(ucontext_t *);
 #else
 #define _GETCONTEXT		getcontext
 #define _SETCONTEXT		setcontext
 #endif

 #define _MD_GET_SP(_t)		(_t)->md.context.uc_mcontext.gpregs[CXT_SP]
 #define _PR_CONTEXT_TYPE	ucontext_t
 #define _PR_NUM_GCREGS		NGREG

 #define CONTEXT(_thread) (&(_thread)->md.context)

 #define _PR_IS_NATIVE_THREAD_SUPPORTED() 0

 /*
 ** Machine-dependent (MD) data structures.
 */
 struct _MDThread {
     _PR_CONTEXT_TYPE context;
     int id;
     int errcode;
 };

 struct _MDThreadStack {
     PRInt8 notused;
 };

 struct _MDLock {
     PRInt8 notused;
 };

 struct _MDSemaphore {
     PRInt8 notused;
 };

 struct _MDCVar {
     PRInt8 notused;
 };

 struct _MDSegment {
     PRInt8 notused;
 };

 /*
  * md-specific cpu structure field
  */
 #define _PR_MD_MAX_OSFD FD_SETSIZE

 struct _MDCPU_Unix {
     PRCList ioQ;
     PRUint32 ioq_timeout;
     PRInt32 ioq_max_osfd;
     PRInt32 ioq_osfd_cnt;
 #ifndef _PR_USE_POLL
     fd_set fd_read_set, fd_write_set, fd_exception_set;
     PRInt16 fd_read_cnt[_PR_MD_MAX_OSFD],fd_write_cnt[_PR_MD_MAX_OSFD],
 				fd_exception_cnt[_PR_MD_MAX_OSFD];
 #else
 	struct pollfd *ioq_pollfds;
 	int ioq_pollfds_size;
 #endif	/* _PR_USE_POLL */
 };

 #define _PR_IOQ(_cpu)			((_cpu)->md.md_unix.ioQ)
 #define _PR_ADD_TO_IOQ(_pq, _cpu) PR_APPEND_LINK(&_pq.links, &_PR_IOQ(_cpu))
 #define _PR_FD_READ_SET(_cpu)		((_cpu)->md.md_unix.fd_read_set)
 #define _PR_FD_READ_CNT(_cpu)		((_cpu)->md.md_unix.fd_read_cnt)
 #define _PR_FD_WRITE_SET(_cpu)		((_cpu)->md.md_unix.fd_write_set)
 #define _PR_FD_WRITE_CNT(_cpu)		((_cpu)->md.md_unix.fd_write_cnt)
 #define _PR_FD_EXCEPTION_SET(_cpu)	((_cpu)->md.md_unix.fd_exception_set)
 #define _PR_FD_EXCEPTION_CNT(_cpu)	((_cpu)->md.md_unix.fd_exception_cnt)
 #define _PR_IOQ_TIMEOUT(_cpu)		((_cpu)->md.md_unix.ioq_timeout)
 #define _PR_IOQ_MAX_OSFD(_cpu)		((_cpu)->md.md_unix.ioq_max_osfd)
 #define _PR_IOQ_OSFD_CNT(_cpu)		((_cpu)->md.md_unix.ioq_osfd_cnt)
 #define _PR_IOQ_POLLFDS(_cpu)		((_cpu)->md.md_unix.ioq_pollfds)
 #define _PR_IOQ_POLLFDS_SIZE(_cpu)	((_cpu)->md.md_unix.ioq_pollfds_size)

 #define _PR_IOQ_MIN_POLLFDS_SIZE(_cpu)	32

 struct _MDCPU {
 	struct _MDCPU_Unix md_unix;
 };

 #define _MD_INIT_LOCKS()
 #define _MD_NEW_LOCK(lock) PR_SUCCESS
 #define _MD_FREE_LOCK(lock)
 #define _MD_LOCK(lock)
 #define _MD_UNLOCK(lock)
 #define _MD_INIT_IO()
 #define _MD_IOQ_LOCK()
 #define _MD_IOQ_UNLOCK()

 /*
 ** Initialize the thread context preparing it to execute "_main()"
 ** - get a nice, fresh context
 ** - set its SP to the stack we allcoated for it
 ** - set it to start things at "e"
 */
 #define _MD_INIT_CONTEXT(thread, _sp, _main, status)                \
     PR_BEGIN_MACRO                                                  \
     *status = PR_TRUE;                                              \
     _GETCONTEXT(CONTEXT(thread));                                   \
     /* this is supposed to point to the stack BASE, not to SP */    \
     CONTEXT(thread)->uc_stack.ss_sp = thread->stack->stackBottom;   \
     CONTEXT(thread)->uc_stack.ss_size = thread->stack->stackSize;   \
     CONTEXT(thread)->uc_mcontext.gpregs[CXT_SP] = ((unsigned long)_sp - 128) & 0xfffffff8; \
     CONTEXT(thread)->uc_mcontext.gpregs[CXT_T9] = _main;            \
     CONTEXT(thread)->uc_mcontext.gpregs[CXT_EPC] = _main;           \
     CONTEXT(thread)->uc_mcontext.gpregs[CXT_RA] = 0;                \
     thread->no_sched = 0;                                           \
     PR_END_MACRO

 /*
 ** Save current context as it is scheduled away
 */
 #define _MD_SWITCH_CONTEXT(_thread)       \
     PR_BEGIN_MACRO                        \
     if (!_GETCONTEXT(CONTEXT(_thread))) { \
 	_MD_SAVE_ERRNO(_thread);          \
 	_MD_SET_LAST_THREAD(_thread);     \
         _PR_Schedule();                   \
     }                                     \
     PR_END_MACRO

 /*
 ** Restore a thread context, saved by _MD_SWITCH_CONTEXT or set up
 **  by _MD_INIT_CONTEXT
 **  CXT_V0 is the register that holds the return value.
 **   We must set it to 1 so that we can see if the return from
 **   getcontext() is the result of calling getcontext() or
 **   setcontext()...
 **   setting a context got with getcontext() appears to
 **   return from getcontext(), too!
 **  CXT_A3 is the register that holds status when returning
 **   from a syscall. It is set to 0 to indicate success,
 **   because we want getcontext() on the other side of the magic
 **   door to be ok.
 */
 #define _MD_RESTORE_CONTEXT(_thread)   \
     PR_BEGIN_MACRO                     \
     ucontext_t *uc = CONTEXT(_thread); \
     uc->uc_mcontext.gpregs[CXT_V0] = 1;\
     uc->uc_mcontext.gpregs[CXT_A3] = 0;\
     _MD_RESTORE_ERRNO(_thread);        \
     _MD_SET_CURRENT_THREAD(_thread);   \
     _SETCONTEXT(uc);                   \
     PR_END_MACRO

 #define _MD_SAVE_ERRNO(t)	 (t)->md.errcode = errno;
 #define _MD_RESTORE_ERRNO(t)	 errno = (t)->md.errcode;

 #define _MD_GET_INTERVAL	_PR_UNIX_GetInterval
 #define _MD_INTERVAL_PER_SEC	_PR_UNIX_TicksPerSecond

 #define _MD_EARLY_INIT		_MD_EarlyInit
 #define _MD_FINAL_INIT		_PR_UnixInit
 #define _MD_INIT_RUNNING_CPU(cpu) _MD_unix_init_running_cpu(cpu)
 #define _MD_INIT_THREAD		_MD_InitializeThread
 #define _MD_EXIT_THREAD(thread)
 #define _MD_SUSPEND_THREAD(thread)
 #define _MD_RESUME_THREAD(thread)
 #define _MD_CLEAN_THREAD(_thread)

 #if !defined(S_ISSOCK) && defined(S_IFSOCK)
 #define S_ISSOCK(mode)   ((mode&0xF000) == 0xC000)
 #endif
 #if !defined(S_ISLNK) && defined(S_IFLNK)
 #define S_ISLNK(mode)   ((mode&0xA000) == 0xC000)
 #endif

 #include <sys/time.h>
 #include <sys/types.h>
 #include <sys/select.h>
 extern int _select(int nfds, fd_set *readfds, fd_set *writefds,
 	fd_set *execptfds, struct timeval *timeout);
 #define _MD_SELECT(nfds,r,w,e,tv) _select(nfds,r,w,e,tv)
 #define _MD_POLL _poll

 #endif /* nspr_reliantunix_defs_h___ */
	/* -- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -- */
	/* *** BEGIN LICENSE BLOCK ***
	* Version: MPL 1.1/GPL 2.0/LGPL 2.1
	*
	* The contents of this file are subject to the Mozilla Public License Version
	* 1.1 (the "License"); you may not use this file except in compliance with
	* the License. You may obtain a copy of the License at
	* http://www.mozilla.org/MPL/
	*
	* Software distributed under the License is distributed on an "AS IS" basis,
	* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
	* for the specific language governing rights and limitations under the
	* License.
	*
	* The Original Code is the Netscape Portable Runtime (NSPR).
	*
	* The Initial Developer of the Original Code is
	* Netscape Communications Corporation.
	* Portions created by the Initial Developer are Copyright (C) 1998-2000
	* the Initial Developer. All Rights Reserved.
	*
	* Contributor(s):
	*
	* Alternatively, the contents of this file may be used under the terms of
	* either the GNU General Public License Version 2 or later (the "GPL"), or
	* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
	* in which case the provisions of the GPL or the LGPL are applicable instead
	* of those above. If you wish to allow use of your version of this file only
	* under the terms of either the GPL or the LGPL, and not to allow others to
	* use your version of this file under the terms of the MPL, indicate your
	* decision by deleting the provisions above and replace them with the notice
	* and other provisions required by the GPL or the LGPL. If you do not delete
	* the provisions above, a recipient may use your version of this file under
	* the terms of any one of the MPL, the GPL or the LGPL.
	*
	* *** END LICENSE BLOCK *** */

	/*
	* reliantunix.h
	* 5/18/96 Taken from nec.h -- chrisk@netscape.com
	* 3/14/97 Modified for nspr20 -- chrisk@netscape.com
	*/
	#ifndef nspr_reliantunix_defs_h___
	#define nspr_reliantunix_defs_h___

	/*
	* Internal configuration macros
	*/

	#define PR_LINKER_ARCH "sinix"
	#define _PR_SI_SYSNAME "SINIX"
	#define _PR_SI_ARCHITECTURE "mips"
	#define PR_DLL_SUFFIX ".so"

	#define _PR_VMBASE 0x30000000
	#define _PR_STACK_VMBASE 0x50000000
	#define _MD_DEFAULT_STACK_SIZE (2*65536L)
	#define _MD_MMAP_FLAGS MAP_PRIVATE\|MAP_FIXED

	#undef HAVE_STACK_GROWING_UP
	#define HAVE_DLL
	#define USE_DLFCN
	#define NEED_STRFTIME_LOCK
	#define NEED_TIME_R
	#define HAVE_NETCONFIG
	#define HAVE_WEAK_IO_SYMBOLS
	#define HAVE_WEAK_MALLOC_SYMBOLS
	#define _PR_RECV_BROKEN /* recv doesn't work on Unix Domain Sockets */
	#define _PR_POLL_AVAILABLE
	#define _PR_USE_POLL
	#define _PR_STAT_HAS_ST_ATIM
	#define _PR_NO_LARGE_FILES

	/*
	* Mike Patnode indicated that it is possibly safe now to use context-switching
	* calls that do not change the signal mask, like setjmp vs. sigsetjmp.
	* So we'll use our homegrown, getcontext/setcontext-compatible stuff which
	* will save us the getcontext/setcontext system calls at each context switch.
	* It already works in FastTrack 2.01, so it should do it here :-)
	* - chrisk 040497
	*/
	#define USE_SETCXT /* temporarily disabled... */

	#include <ucontext.h>

	#ifdef USE_SETCXT
	/* use non-syscall machine language replacement */
	#define _GETCONTEXT getcxt
	#define _SETCONTEXT setcxt
	/* defined in os_ReliantUNIX.s */
	extern int getcxt(ucontext_t *);
	extern int setcxt(ucontext_t *);
	#else
	#define _GETCONTEXT getcontext
	#define _SETCONTEXT setcontext
	#endif

	#define _MD_GET_SP(_t) (_t)->md.context.uc_mcontext.gpregs[CXT_SP]
	#define _PR_CONTEXT_TYPE ucontext_t
	#define _PR_NUM_GCREGS NGREG

	#define CONTEXT(_thread) (&(_thread)->md.context)

	#define _PR_IS_NATIVE_THREAD_SUPPORTED() 0

	/*
	** Machine-dependent (MD) data structures.
	*/
	struct _MDThread {
	_PR_CONTEXT_TYPE context;
	int id;
	int errcode;
	};

	struct _MDThreadStack {
	PRInt8 notused;
	};

	struct _MDLock {
	PRInt8 notused;
	};

	struct _MDSemaphore {
	PRInt8 notused;
	};

	struct _MDCVar {
	PRInt8 notused;
	};

	struct _MDSegment {
	PRInt8 notused;
	};

	/*
	* md-specific cpu structure field
	*/
	#define _PR_MD_MAX_OSFD FD_SETSIZE

	struct _MDCPU_Unix {
	PRCList ioQ;
	PRUint32 ioq_timeout;
	PRInt32 ioq_max_osfd;
	PRInt32 ioq_osfd_cnt;
	#ifndef _PR_USE_POLL
	fd_set fd_read_set, fd_write_set, fd_exception_set;
	PRInt16 fd_read_cnt[_PR_MD_MAX_OSFD],fd_write_cnt[_PR_MD_MAX_OSFD],
	fd_exception_cnt[_PR_MD_MAX_OSFD];
	#else
	struct pollfd *ioq_pollfds;
	int ioq_pollfds_size;
	#endif /* _PR_USE_POLL */
	};

	#define _PR_IOQ(_cpu) ((_cpu)->md.md_unix.ioQ)
	#define _PR_ADD_TO_IOQ(_pq, _cpu) PR_APPEND_LINK(&_pq.links, &_PR_IOQ(_cpu))
	#define _PR_FD_READ_SET(_cpu) ((_cpu)->md.md_unix.fd_read_set)
	#define _PR_FD_READ_CNT(_cpu) ((_cpu)->md.md_unix.fd_read_cnt)
	#define _PR_FD_WRITE_SET(_cpu) ((_cpu)->md.md_unix.fd_write_set)
	#define _PR_FD_WRITE_CNT(_cpu) ((_cpu)->md.md_unix.fd_write_cnt)
	#define _PR_FD_EXCEPTION_SET(_cpu) ((_cpu)->md.md_unix.fd_exception_set)
	#define _PR_FD_EXCEPTION_CNT(_cpu) ((_cpu)->md.md_unix.fd_exception_cnt)
	#define _PR_IOQ_TIMEOUT(_cpu) ((_cpu)->md.md_unix.ioq_timeout)
	#define _PR_IOQ_MAX_OSFD(_cpu) ((_cpu)->md.md_unix.ioq_max_osfd)
	#define _PR_IOQ_OSFD_CNT(_cpu) ((_cpu)->md.md_unix.ioq_osfd_cnt)
	#define _PR_IOQ_POLLFDS(_cpu) ((_cpu)->md.md_unix.ioq_pollfds)
	#define _PR_IOQ_POLLFDS_SIZE(_cpu) ((_cpu)->md.md_unix.ioq_pollfds_size)

	#define _PR_IOQ_MIN_POLLFDS_SIZE(_cpu) 32

	struct _MDCPU {
	struct _MDCPU_Unix md_unix;
	};

	#define _MD_INIT_LOCKS()
	#define _MD_NEW_LOCK(lock) PR_SUCCESS
	#define _MD_FREE_LOCK(lock)
	#define _MD_LOCK(lock)
	#define _MD_UNLOCK(lock)
	#define _MD_INIT_IO()
	#define _MD_IOQ_LOCK()
	#define _MD_IOQ_UNLOCK()

	/*
	** Initialize the thread context preparing it to execute "_main()"
	** - get a nice, fresh context
	** - set its SP to the stack we allcoated for it
	** - set it to start things at "e"
	*/
	#define _MD_INIT_CONTEXT(thread, _sp, _main, status) \
	PR_BEGIN_MACRO \
	*status = PR_TRUE; \
	_GETCONTEXT(CONTEXT(thread)); \
	/* this is supposed to point to the stack BASE, not to SP */ \
	CONTEXT(thread)->uc_stack.ss_sp = thread->stack->stackBottom; \
	CONTEXT(thread)->uc_stack.ss_size = thread->stack->stackSize; \
	CONTEXT(thread)->uc_mcontext.gpregs[CXT_SP] = ((unsigned long)_sp - 128) & 0xfffffff8; \
	CONTEXT(thread)->uc_mcontext.gpregs[CXT_T9] = _main; \
	CONTEXT(thread)->uc_mcontext.gpregs[CXT_EPC] = _main; \
	CONTEXT(thread)->uc_mcontext.gpregs[CXT_RA] = 0; \
	thread->no_sched = 0; \
	PR_END_MACRO

	/*
	** Save current context as it is scheduled away
	*/
	#define _MD_SWITCH_CONTEXT(_thread) \
	PR_BEGIN_MACRO \
	if (!_GETCONTEXT(CONTEXT(_thread))) { \
	_MD_SAVE_ERRNO(_thread); \
	_MD_SET_LAST_THREAD(_thread); \
	_PR_Schedule(); \
	} \
	PR_END_MACRO

	/*
	** Restore a thread context, saved by _MD_SWITCH_CONTEXT or set up
	** by _MD_INIT_CONTEXT
	** CXT_V0 is the register that holds the return value.
	** We must set it to 1 so that we can see if the return from
	** getcontext() is the result of calling getcontext() or
	** setcontext()...
	** setting a context got with getcontext() appears to
	** return from getcontext(), too!
	** CXT_A3 is the register that holds status when returning
	** from a syscall. It is set to 0 to indicate success,
	** because we want getcontext() on the other side of the magic
	** door to be ok.
	*/
	#define _MD_RESTORE_CONTEXT(_thread) \
	PR_BEGIN_MACRO \
	ucontext_t *uc = CONTEXT(_thread); \
	uc->uc_mcontext.gpregs[CXT_V0] = 1;\
	uc->uc_mcontext.gpregs[CXT_A3] = 0;\
	_MD_RESTORE_ERRNO(_thread); \
	_MD_SET_CURRENT_THREAD(_thread); \
	_SETCONTEXT(uc); \
	PR_END_MACRO

	#define _MD_SAVE_ERRNO(t) (t)->md.errcode = errno;
	#define _MD_RESTORE_ERRNO(t) errno = (t)->md.errcode;

	#define _MD_GET_INTERVAL _PR_UNIX_GetInterval
	#define _MD_INTERVAL_PER_SEC _PR_UNIX_TicksPerSecond

	#define _MD_EARLY_INIT _MD_EarlyInit
	#define _MD_FINAL_INIT _PR_UnixInit
	#define _MD_INIT_RUNNING_CPU(cpu) _MD_unix_init_running_cpu(cpu)
	#define _MD_INIT_THREAD _MD_InitializeThread
	#define _MD_EXIT_THREAD(thread)
	#define _MD_SUSPEND_THREAD(thread)
	#define _MD_RESUME_THREAD(thread)
	#define _MD_CLEAN_THREAD(_thread)

	#if !defined(S_ISSOCK) && defined(S_IFSOCK)
	#define S_ISSOCK(mode) ((mode&0xF000) == 0xC000)
	#endif
	#if !defined(S_ISLNK) && defined(S_IFLNK)
	#define S_ISLNK(mode) ((mode&0xA000) == 0xC000)
	#endif

	#include <sys/time.h>
	#include <sys/types.h>
	#include <sys/select.h>
	extern int _select(int nfds, fd_set readfds, fd_set writefds,
	fd_set execptfds, struct timeval timeout);
	#define _MD_SELECT(nfds,r,w,e,tv) _select(nfds,r,w,e,tv)
	#define _MD_POLL _poll

	#endif /* nspr_reliantunix_defs_h___ */