| /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ |
| /* ***** BEGIN LICENSE BLOCK ***** |
| * Version: MPL 1.1/GPL 2.0/LGPL 2.1 |
| * |
| * The contents of this file are subject to the Mozilla Public License Version |
| * 1.1 (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" basis, |
| * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License |
| * for the specific language governing rights and limitations under the |
| * License. |
| * |
| * The Original Code is the Netscape Portable Runtime (NSPR). |
| * |
| * The Initial Developer of the Original Code is |
| * Netscape Communications Corporation. |
| * Portions created by the Initial Developer are Copyright (C) 1998-2000 |
| * the Initial Developer. All Rights Reserved. |
| * |
| * Contributor(s): |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * either the GNU General Public License Version 2 or later (the "GPL"), or |
| * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), |
| * in which case the provisions of the GPL or the LGPL are applicable instead |
| * of those above. If you wish to allow use of your version of this file only |
| * under the terms of either the GPL or the LGPL, and not to allow others to |
| * use your version of this file under the terms of the MPL, indicate your |
| * decision by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL or the LGPL. If you do not delete |
| * the provisions above, a recipient may use your version of this file under |
| * the terms of any one of the MPL, the GPL or the LGPL. |
| * |
| * ***** END LICENSE BLOCK ***** */ |
| |
| /* |
| ** Class definitions for normal and special file I/O (ref: prio.h) |
| */ |
| |
| #if defined(_RCFILEIO_H) |
| #else |
| #define _RCFILEIO_H |
| |
| #include "rcio.h" |
| #include "rctime.h" |
| |
| /* |
| ** One would normally create a concrete class, such as RCFileIO, but then |
| ** pass around more generic references, ie., RCIO. |
| ** |
| ** This subclass of RCIO hides (makes private) the methods that are not |
| ** applicable to normal files. |
| */ |
| |
| class RCFileInfo; |
| |
| class PR_IMPLEMENT(RCFileIO): public RCIO |
| { |
| public: |
| RCFileIO(); |
| virtual ~RCFileIO(); |
| |
| virtual PRInt64 Available(); |
| virtual PRStatus Close(); |
| static PRStatus Delete(const char *name); |
| virtual PRStatus FileInfo(RCFileInfo* info) const; |
| static PRStatus FileInfo(const char *name, RCFileInfo* info); |
| virtual PRStatus Fsync(); |
| virtual PRStatus Open(const char *name, PRIntn flags, PRIntn mode); |
| virtual PRInt32 Read(void *buf, PRSize amount); |
| virtual PRInt64 Seek(PRInt64 offset, RCIO::Whence how); |
| virtual PRInt32 Write(const void *buf, PRSize amount); |
| virtual PRInt32 Writev( |
| const PRIOVec *iov, PRSize size, |
| const RCInterval& timeout); |
| |
| private: |
| |
| /* These methods made private are unavailable for this object */ |
| RCFileIO(const RCFileIO&); |
| void operator=(const RCFileIO&); |
| |
| RCIO* Accept(RCNetAddr* addr, const RCInterval& timeout); |
| PRInt32 AcceptRead( |
| RCIO **newfd, RCNetAddr **address, void *buffer, |
| PRSize amount, const RCInterval& timeout); |
| PRStatus Bind(const RCNetAddr& addr); |
| PRStatus Connect(const RCNetAddr& addr, const RCInterval& timeout); |
| PRStatus GetLocalName(RCNetAddr *addr) const; |
| PRStatus GetPeerName(RCNetAddr *addr) const; |
| PRStatus GetSocketOption(PRSocketOptionData *data) const; |
| PRStatus Listen(PRIntn backlog); |
| PRInt16 Poll(PRInt16 in_flags, PRInt16 *out_flags); |
| PRInt32 Recv( |
| void *buf, PRSize amount, PRIntn flags, |
| const RCInterval& timeout); |
| PRInt32 Recvfrom( |
| void *buf, PRSize amount, PRIntn flags, |
| RCNetAddr* addr, const RCInterval& timeout); |
| PRInt32 Send( |
| const void *buf, PRSize amount, PRIntn flags, |
| const RCInterval& timeout); |
| PRInt32 Sendto( |
| const void *buf, PRSize amount, PRIntn flags, |
| const RCNetAddr& addr, |
| const RCInterval& timeout); |
| PRStatus SetSocketOption(const PRSocketOptionData *data); |
| PRStatus Shutdown(RCIO::ShutdownHow how); |
| PRInt32 TransmitFile( |
| RCIO *source, const void *headers, |
| PRSize hlen, RCIO::FileDisposition flags, |
| const RCInterval& timeout); |
| public: |
| |
| /* |
| ** The following function return a valid normal file object, |
| ** Such objects can be used for scanned input and console output. |
| */ |
| typedef enum { |
| input = PR_StandardInput, |
| output = PR_StandardOutput, |
| error = PR_StandardError |
| } SpecialFile; |
| |
| static RCIO *GetSpecialFile(RCFileIO::SpecialFile special); |
| |
| }; /* RCFileIO */ |
| |
| class PR_IMPLEMENT(RCFileInfo): public RCBase |
| { |
| public: |
| typedef enum { |
| file = PR_FILE_FILE, |
| directory = PR_FILE_DIRECTORY, |
| other = PR_FILE_OTHER |
| } FileType; |
| |
| public: |
| RCFileInfo(); |
| RCFileInfo(const RCFileInfo&); |
| |
| virtual ~RCFileInfo(); |
| |
| PRInt64 Size() const; |
| RCTime CreationTime() const; |
| RCTime ModifyTime() const; |
| RCFileInfo::FileType Type() const; |
| |
| friend PRStatus RCFileIO::FileInfo(RCFileInfo*) const; |
| friend PRStatus RCFileIO::FileInfo(const char *name, RCFileInfo*); |
| |
| private: |
| PRFileInfo64 info; |
| }; /* RCFileInfo */ |
| |
| inline RCFileInfo::RCFileInfo(): RCBase() { } |
| inline PRInt64 RCFileInfo::Size() const { return info.size; } |
| |
| #endif /* defined(_RCFILEIO_H) */ |