| /* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ |
| /* ***** BEGIN LICENSE BLOCK ***** |
| * Version: MPL 1.1/GPL 2.0/LGPL 2.1 |
| * |
| * The contents of this file are subject to the Mozilla Public License Version |
| * 1.1 (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" basis, |
| * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License |
| * for the specific language governing rights and limitations under the |
| * License. |
| * |
| * The Original Code is the Netscape Portable Runtime (NSPR). |
| * |
| * The Initial Developer of the Original Code is |
| * Netscape Communications Corporation. |
| * Portions created by the Initial Developer are Copyright (C) 1998-2000 |
| * the Initial Developer. All Rights Reserved. |
| * |
| * Contributor(s): |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * either the GNU General Public License Version 2 or later (the "GPL"), or |
| * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), |
| * in which case the provisions of the GPL or the LGPL are applicable instead |
| * of those above. If you wish to allow use of your version of this file only |
| * under the terms of either the GPL or the LGPL, and not to allow others to |
| * use your version of this file under the terms of the MPL, indicate your |
| * decision by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL or the LGPL. If you do not delete |
| * the provisions above, a recipient may use your version of this file under |
| * the terms of any one of the MPL, the GPL or the LGPL. |
| * |
| * ***** END LICENSE BLOCK ***** */ |
| |
| /* |
| * A test for nonblocking connect. Functions tested include PR_Connect, |
| * PR_Poll, and PR_GetConnectStatus. |
| * |
| * The test should be invoked with a host name, for example: |
| * nbconn www.netscape.com |
| * It will do a nonblocking connect to port 80 (HTTP) on that host, |
| * and when connected, issue the "GET /" HTTP command. |
| * |
| * You should run this test in three ways: |
| * 1. To a known web site, such as www.netscape.com. The HTML of the |
| * top-level page at the web site should be printed. |
| * 2. To a machine not running a web server at port 80. This test should |
| * fail. Ideally the error code should be PR_CONNECT_REFUSED_ERROR. |
| * But it is possible to return PR_UNKNOWN_ERROR on certain platforms. |
| * 3. To an unreachable machine, for example, a machine that is off line. |
| * The test should fail after the connect times out. Ideally the |
| * error code should be PR_IO_TIMEOUT_ERROR, but it is possible to |
| * return PR_UNKNOWN_ERROR on certain platforms. |
| */ |
| |
| #include "nspr.h" |
| #include "plgetopt.h" |
| #include <stdio.h> |
| #include <string.h> |
| |
| #define SERVER_MAX_BIND_COUNT 100 |
| #define DATA_BUF_SIZE 256 |
| #define TCP_SERVER_PORT 10000 |
| #define TCP_UNUSED_PORT 211 |
| |
| typedef struct Server_Param { |
| PRFileDesc *sp_fd; /* server port */ |
| } Server_Param; |
| static void PR_CALLBACK TCP_Server(void *arg); |
| |
| int _debug_on; |
| #define DPRINTF(arg) if (_debug_on) printf arg |
| |
| static PRIntn connection_success_test(); |
| static PRIntn connection_failure_test(); |
| |
| int main(int argc, char **argv) |
| { |
| PRHostEnt he; |
| char buf[1024]; |
| PRNetAddr addr; |
| PRPollDesc pd; |
| PRStatus rv; |
| PRSocketOptionData optData; |
| const char *hostname = NULL; |
| PRIntn default_case, n, bytes_read, bytes_sent; |
| PRInt32 failed_already = 0; |
| |
| /* |
| * -d debug mode |
| */ |
| |
| PLOptStatus os; |
| PLOptState *opt = PL_CreateOptState(argc, argv, "d"); |
| while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) |
| { |
| if (PL_OPT_BAD == os) continue; |
| switch (opt->option) |
| { |
| case 0: /* debug mode */ |
| hostname = opt->value; |
| break; |
| case 'd': /* debug mode */ |
| _debug_on = 1; |
| break; |
| default: |
| break; |
| } |
| } |
| PL_DestroyOptState(opt); |
| |
| PR_STDIO_INIT(); |
| if (hostname) |
| default_case = 0; |
| else |
| default_case = 1; |
| |
| if (default_case) { |
| |
| /* |
| * In the default case the following tests are executed: |
| * 1. successful connection: a server thread accepts a connection |
| * from the main thread |
| * 2. unsuccessful connection: the main thread tries to connect to a |
| * nonexistent port and expects to get an error |
| */ |
| rv = connection_success_test(); |
| if (rv == 0) |
| rv = connection_failure_test(); |
| return rv; |
| } else { |
| PRFileDesc *sock; |
| |
| if (PR_GetHostByName(argv[1], buf, sizeof(buf), &he) == PR_FAILURE) { |
| printf( "Unknown host: %s\n", argv[1]); |
| exit(1); |
| } else { |
| printf( "host: %s\n", buf); |
| } |
| PR_EnumerateHostEnt(0, &he, 80, &addr); |
| |
| sock = PR_NewTCPSocket(); |
| optData.option = PR_SockOpt_Nonblocking; |
| optData.value.non_blocking = PR_TRUE; |
| PR_SetSocketOption(sock, &optData); |
| rv = PR_Connect(sock, &addr, PR_INTERVAL_NO_TIMEOUT); |
| if (rv == PR_FAILURE && PR_GetError() == PR_IN_PROGRESS_ERROR) { |
| printf( "Connect in progress\n"); |
| } |
| |
| pd.fd = sock; |
| pd.in_flags = PR_POLL_WRITE | PR_POLL_EXCEPT; |
| n = PR_Poll(&pd, 1, PR_INTERVAL_NO_TIMEOUT); |
| if (n == -1) { |
| printf( "PR_Poll failed\n"); |
| exit(1); |
| } |
| printf( "PR_Poll returns %d\n", n); |
| if (pd.out_flags & PR_POLL_READ) { |
| printf( "PR_POLL_READ\n"); |
| } |
| if (pd.out_flags & PR_POLL_WRITE) { |
| printf( "PR_POLL_WRITE\n"); |
| } |
| if (pd.out_flags & PR_POLL_EXCEPT) { |
| printf( "PR_POLL_EXCEPT\n"); |
| } |
| if (pd.out_flags & PR_POLL_ERR) { |
| printf( "PR_POLL_ERR\n"); |
| } |
| if (pd.out_flags & PR_POLL_NVAL) { |
| printf( "PR_POLL_NVAL\n"); |
| } |
| |
| if (PR_GetConnectStatus(&pd) == PR_SUCCESS) { |
| printf("PR_GetConnectStatus: connect succeeded\n"); |
| PR_Write(sock, "GET /\r\n\r\n", 9); |
| PR_Shutdown(sock, PR_SHUTDOWN_SEND); |
| pd.in_flags = PR_POLL_READ; |
| while (1) { |
| n = PR_Poll(&pd, 1, PR_INTERVAL_NO_TIMEOUT); |
| printf( "poll returns %d\n", n); |
| n = PR_Read(sock, buf, sizeof(buf)); |
| printf( "read returns %d\n", n); |
| if (n <= 0) { |
| break; |
| } |
| PR_Write(PR_STDOUT, buf, n); |
| } |
| } else { |
| if (PR_GetError() == PR_IN_PROGRESS_ERROR) { |
| printf( "PR_GetConnectStatus: connect still in progress\n"); |
| exit(1); |
| } |
| printf( "PR_GetConnectStatus: connect failed: (%ld, %ld)\n", |
| PR_GetError(), PR_GetOSError()); |
| } |
| PR_Close(sock); |
| printf( "PASS\n"); |
| return 0; |
| |
| } |
| } |
| |
| |
| /* |
| * TCP Server |
| * Server Thread |
| * Accept a connection from the client and write some data |
| */ |
| static void PR_CALLBACK |
| TCP_Server(void *arg) |
| { |
| Server_Param *sp = (Server_Param *) arg; |
| PRFileDesc *sockfd, *newsockfd; |
| char data_buf[DATA_BUF_SIZE]; |
| PRIntn rv, bytes_read; |
| |
| sockfd = sp->sp_fd; |
| if ((newsockfd = PR_Accept(sockfd, NULL, |
| PR_INTERVAL_NO_TIMEOUT)) == NULL) { |
| fprintf(stderr,"ERROR - PR_Accept failed: (%d,%d)\n", |
| PR_GetError(), PR_GetOSError()); |
| return; |
| } |
| bytes_read = 0; |
| while (bytes_read != DATA_BUF_SIZE) { |
| rv = PR_Read(newsockfd, data_buf + bytes_read , |
| DATA_BUF_SIZE - bytes_read); |
| if (rv < 0) { |
| fprintf(stderr,"Error - PR_Read failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError()); |
| PR_Close(newsockfd); |
| return; |
| } |
| PR_ASSERT(rv != 0); |
| bytes_read += rv; |
| } |
| DPRINTF(("Bytes read from client - %d\n",bytes_read)); |
| rv = PR_Write(newsockfd, data_buf,DATA_BUF_SIZE); |
| if (rv < 0) { |
| fprintf(stderr,"Error - PR_Write failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError()); |
| PR_Close(newsockfd); |
| return; |
| } |
| PR_ASSERT(rv == DATA_BUF_SIZE); |
| DPRINTF(("Bytes written to client - %d\n",rv)); |
| PR_Close(newsockfd); |
| } |
| |
| |
| /* |
| * test for successful connection using a non-blocking socket |
| */ |
| static PRIntn |
| connection_success_test() |
| { |
| PRFileDesc *sockfd = NULL, *conn_fd = NULL; |
| PRNetAddr netaddr; |
| PRInt32 i, rv; |
| PRPollDesc pd; |
| PRSocketOptionData optData; |
| PRThread *thr = NULL; |
| Server_Param sp; |
| char send_buf[DATA_BUF_SIZE], recv_buf[DATA_BUF_SIZE]; |
| PRIntn default_case, n, bytes_read, bytes_sent; |
| PRIntn failed_already = 0; |
| |
| /* |
| * Create a tcp socket |
| */ |
| if ((sockfd = PR_NewTCPSocket()) == NULL) { |
| fprintf(stderr,"Error - PR_NewTCPSocket failed\n"); |
| failed_already=1; |
| goto def_exit; |
| } |
| memset(&netaddr, 0 , sizeof(netaddr)); |
| netaddr.inet.family = PR_AF_INET; |
| netaddr.inet.port = PR_htons(TCP_SERVER_PORT); |
| netaddr.inet.ip = PR_htonl(PR_INADDR_ANY); |
| /* |
| * try a few times to bind server's address, if addresses are in |
| * use |
| */ |
| i = 0; |
| while (PR_Bind(sockfd, &netaddr) < 0) { |
| if (PR_GetError() == PR_ADDRESS_IN_USE_ERROR) { |
| netaddr.inet.port += 2; |
| if (i++ < SERVER_MAX_BIND_COUNT) |
| continue; |
| } |
| fprintf(stderr,"ERROR - PR_Bind failed: (%d,%d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| |
| if (PR_Listen(sockfd, 32) < 0) { |
| fprintf(stderr,"ERROR - PR_Listen failed: (%d,%d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| |
| if (PR_GetSockName(sockfd, &netaddr) < 0) { |
| fprintf(stderr,"ERROR - PR_GetSockName failed: (%d,%d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| if ((conn_fd = PR_NewTCPSocket()) == NULL) { |
| fprintf(stderr,"Error - PR_NewTCPSocket failed\n"); |
| failed_already=1; |
| goto def_exit; |
| } |
| optData.option = PR_SockOpt_Nonblocking; |
| optData.value.non_blocking = PR_TRUE; |
| PR_SetSocketOption(conn_fd, &optData); |
| rv = PR_Connect(conn_fd, &netaddr, PR_INTERVAL_NO_TIMEOUT); |
| if (rv == PR_FAILURE) { |
| if (PR_GetError() == PR_IN_PROGRESS_ERROR) { |
| DPRINTF(("Connect in progress\n")); |
| } else { |
| fprintf(stderr,"Error - PR_Connect failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| } |
| /* |
| * Now create a thread to accept a connection |
| */ |
| sp.sp_fd = sockfd; |
| thr = PR_CreateThread(PR_USER_THREAD, TCP_Server, (void *)&sp, |
| PR_PRIORITY_NORMAL, PR_LOCAL_THREAD, PR_JOINABLE_THREAD, 0); |
| if (thr == NULL) { |
| fprintf(stderr,"Error - PR_CreateThread failed: (%d,%d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| DPRINTF(("Created TCP_Server thread [0x%x]\n",thr)); |
| pd.fd = conn_fd; |
| pd.in_flags = PR_POLL_WRITE | PR_POLL_EXCEPT; |
| n = PR_Poll(&pd, 1, PR_INTERVAL_NO_TIMEOUT); |
| if (n == -1) { |
| fprintf(stderr,"Error - PR_Poll failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| if (PR_GetConnectStatus(&pd) == PR_SUCCESS) { |
| PRInt32 rv; |
| |
| DPRINTF(("Connection successful\n")); |
| |
| /* |
| * Write some data, read it back and check data integrity to |
| * make sure the connection is good |
| */ |
| pd.in_flags = PR_POLL_WRITE; |
| bytes_sent = 0; |
| memset(send_buf, 'a', DATA_BUF_SIZE); |
| while (bytes_sent != DATA_BUF_SIZE) { |
| rv = PR_Poll(&pd, 1, PR_INTERVAL_NO_TIMEOUT); |
| if (rv < 0) { |
| fprintf(stderr,"Error - PR_Poll failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| PR_ASSERT((rv == 1) && (pd.out_flags == PR_POLL_WRITE)); |
| rv = PR_Write(conn_fd, send_buf + bytes_sent, |
| DATA_BUF_SIZE - bytes_sent); |
| if (rv < 0) { |
| fprintf(stderr,"Error - PR_Write failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| PR_ASSERT(rv > 0); |
| bytes_sent += rv; |
| } |
| DPRINTF(("Bytes written to server - %d\n",bytes_sent)); |
| PR_Shutdown(conn_fd, PR_SHUTDOWN_SEND); |
| pd.in_flags = PR_POLL_READ; |
| bytes_read = 0; |
| memset(recv_buf, 0, DATA_BUF_SIZE); |
| while (bytes_read != DATA_BUF_SIZE) { |
| rv = PR_Poll(&pd, 1, PR_INTERVAL_NO_TIMEOUT); |
| if (rv < 0) { |
| fprintf(stderr,"Error - PR_Poll failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| PR_ASSERT((rv == 1) && (pd.out_flags == PR_POLL_READ)); |
| rv = PR_Read(conn_fd, recv_buf + bytes_read , |
| DATA_BUF_SIZE - bytes_read); |
| if (rv < 0) { |
| fprintf(stderr,"Error - PR_Read failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| PR_ASSERT(rv != 0); |
| bytes_read += rv; |
| } |
| DPRINTF(("Bytes read from server - %d\n",bytes_read)); |
| /* |
| * verify the data read |
| */ |
| if (memcmp(send_buf, recv_buf, DATA_BUF_SIZE) != 0) { |
| fprintf(stderr,"ERROR - data corruption\n"); |
| failed_already=1; |
| goto def_exit; |
| } |
| DPRINTF(("Data integrity verified\n")); |
| } else { |
| fprintf(stderr,"PR_GetConnectStatus: connect failed: (%ld, %ld)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already = 1; |
| goto def_exit; |
| } |
| def_exit: |
| if (thr) { |
| PR_JoinThread(thr); |
| thr = NULL; |
| } |
| if (sockfd) { |
| PR_Close(sockfd); |
| sockfd = NULL; |
| } |
| if (conn_fd) { |
| PR_Close(conn_fd); |
| conn_fd = NULL; |
| } |
| if (failed_already) |
| return 1; |
| else |
| return 0; |
| |
| } |
| |
| /* |
| * test for connection to a nonexistent port using a non-blocking socket |
| */ |
| static PRIntn |
| connection_failure_test() |
| { |
| PRFileDesc *sockfd = NULL, *conn_fd = NULL; |
| PRNetAddr netaddr; |
| PRInt32 i, rv; |
| PRPollDesc pd; |
| PRSocketOptionData optData; |
| PRIntn n, failed_already = 0; |
| |
| /* |
| * Create a tcp socket |
| */ |
| if ((sockfd = PR_NewTCPSocket()) == NULL) { |
| fprintf(stderr,"Error - PR_NewTCPSocket failed\n"); |
| failed_already=1; |
| goto def_exit; |
| } |
| memset(&netaddr, 0 , sizeof(netaddr)); |
| netaddr.inet.family = PR_AF_INET; |
| netaddr.inet.port = PR_htons(TCP_SERVER_PORT); |
| netaddr.inet.ip = PR_htonl(PR_INADDR_ANY); |
| /* |
| * try a few times to bind server's address, if addresses are in |
| * use |
| */ |
| i = 0; |
| while (PR_Bind(sockfd, &netaddr) < 0) { |
| if (PR_GetError() == PR_ADDRESS_IN_USE_ERROR) { |
| netaddr.inet.port += 2; |
| if (i++ < SERVER_MAX_BIND_COUNT) |
| continue; |
| } |
| fprintf(stderr,"ERROR - PR_Bind failed: (%d,%d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| |
| if (PR_GetSockName(sockfd, &netaddr) < 0) { |
| fprintf(stderr,"ERROR - PR_GetSockName failed: (%d,%d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| #ifdef AIX |
| /* |
| * On AIX, set to unused/reserved port |
| */ |
| netaddr.inet.port = PR_htons(TCP_UNUSED_PORT); |
| #endif |
| if ((conn_fd = PR_NewTCPSocket()) == NULL) { |
| fprintf(stderr,"Error - PR_NewTCPSocket failed\n"); |
| failed_already=1; |
| goto def_exit; |
| } |
| optData.option = PR_SockOpt_Nonblocking; |
| optData.value.non_blocking = PR_TRUE; |
| PR_SetSocketOption(conn_fd, &optData); |
| rv = PR_Connect(conn_fd, &netaddr, PR_INTERVAL_NO_TIMEOUT); |
| if (rv == PR_FAILURE) { |
| DPRINTF(("PR_Connect to a non-listen port failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError())); |
| } else { |
| PR_ASSERT(rv == PR_SUCCESS); |
| fprintf(stderr,"Error - PR_Connect succeeded, expected to fail\n"); |
| failed_already=1; |
| goto def_exit; |
| } |
| pd.fd = conn_fd; |
| pd.in_flags = PR_POLL_WRITE | PR_POLL_EXCEPT; |
| n = PR_Poll(&pd, 1, PR_INTERVAL_NO_TIMEOUT); |
| if (n == -1) { |
| fprintf(stderr,"Error - PR_Poll failed: (%d, %d)\n", |
| PR_GetError(), PR_GetOSError()); |
| failed_already=1; |
| goto def_exit; |
| } |
| if (PR_GetConnectStatus(&pd) == PR_SUCCESS) { |
| PRInt32 rv; |
| fprintf(stderr,"PR_GetConnectStatus succeeded, expected to fail\n"); |
| failed_already = 1; |
| goto def_exit; |
| } |
| rv = PR_GetError(); |
| DPRINTF(("Connection failed, successfully with PR_Error %d\n",rv)); |
| def_exit: |
| if (sockfd) { |
| PR_Close(sockfd); |
| sockfd = NULL; |
| } |
| if (conn_fd) { |
| PR_Close(conn_fd); |
| conn_fd = NULL; |
| } |
| if (failed_already) |
| return 1; |
| else |
| return 0; |
| |
| } |