Project import
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..3b6c550
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,129 @@
+#
+# Copyright (c) 2010-2011 Nest, Inc.
+# All rights reserved.
+#
+# This document is the property of Nest. It is considered
+# confidential and proprietary information.
+#
+# This document may not be reproduced or transmitted in any form,
+# in whole or in part, without the express written permission of
+# Nest.
+#
+# Description:
+# This file is the make file for libgpg-error, a small library
+# with error codes and descriptions shared by most GnuPG-related
+# software.
+#
+
+BuildConfigSpecialized := No
+BuildProductSpecialized := No
+
+include pre.mak
+
+PackageName := libgpg-error
+
+PackageExtension := tar.bz2
+PackageSeparator := -
+
+PackagePatchArgs := -p1
+
+PackageArchive := $(PackageName).$(PackageExtension)
+PackageSourceDir := $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile = $(call GenerateBuildPaths,Makefile)
+
+LicenseSourceFiles := COPYING COPYING.LIB
+LicenseSourcePaths := $(addprefix $(PackageSourceDir)/,$(LicenseSourceFiles))
+
+CleanPaths += $(PackageLicenseFile)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(LicenseSourcePaths): source
+
+$(PackageLicenseFile): $(LicenseSourcePaths)
+ $(Verbose)touch $@
+ $(Verbose)for file in $(LicenseSourcePaths); do \
+ echo "Concatenating \"$${file}\"..."; \
+ cat $${file} >> $@; \
+ done
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+ $(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory) $(ResultDirectory)
+ $(Verbose)cd $(BuildDirectory) && \
+ $(CURDIR)/$(PackageSourceDir)/configure \
+ CC="$(CC)" CXX="$(CXX)" AR=$(AR) NM=$(NM) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+ INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+ --build=$(HostTuple) \
+ --host=$(TargetTuple) \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --localstatedir=/var
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) \
+ all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libfoo.la' because some packages that depend on
+# these libraries use libtool. If libtool finds a 'libfoo.la' file for
+# a library, it uses the value of 'libdir=<dir>' it finds. In our
+# case, since '--prefix=/usr' this value is '/usr/lib'. It then
+# resolves '-lfoo'. In a cross-compilation environment, this is likely
+# to be neither the right architecture nor the right version to link
+# against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a misdirected
+# link nor an RPATH.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) \
+ DESTDIR=$(ResultDirectory) \
+ install
+ $(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libgpg-error.la)
+
+clean:
+ $(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/libgpg-error-1.10/ABOUT-NLS b/libgpg-error-1.10/ABOUT-NLS
new file mode 100644
index 0000000..83bc72e
--- /dev/null
+++ b/libgpg-error-1.10/ABOUT-NLS
@@ -0,0 +1,1068 @@
+1 Notes on the Free Translation Project
+***************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that free software will gradually become able to speak many
+languages. A few packages already provide translations for their
+messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work on translations can contact the appropriate team.
+
+ When reporting bugs in the `intl/' directory or bugs which may be
+related to internationalization, you should tell about the version of
+`gettext' which is used. The information can be found in the
+`intl/VERSION' file, in internationalized packages.
+
+1.1 Quick configuration advice
+==============================
+
+If you want to exploit the full power of internationalization, you
+should configure it using
+
+ ./configure --with-included-gettext
+
+to force usage of internationalizing routines provided within this
+package, despite the existence of internationalizing capabilities in the
+operating system where this package is being installed. So far, only
+the `gettext' implementation in the GNU C library version 2 provides as
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation. Future versions of GNU `gettext' will
+very likely convey even more functionality. So it might be a good idea
+to change to GNU `gettext' as soon as possible.
+
+ So you need _not_ provide this option if you are using GNU libc 2 or
+you have installed a recent copy of the GNU gettext package with the
+included `libintl'.
+
+1.2 INSTALL Matters
+===================
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. If not, the included GNU
+`gettext' library will be used. This library is wholly contained
+within this package, usually in the `intl/' subdirectory, so prior
+installation of the GNU `gettext' package is _not_ required.
+Installers may use special options at configuration time for changing
+the default behaviour. The commands:
+
+ ./configure --with-included-gettext
+ ./configure --disable-nls
+
+will, respectively, bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl.a' file and
+will decide to use this. This might not be desirable. You should use
+the more recent version of the GNU `gettext' library. I.e. if the file
+`intl/VERSION' shows that the library which comes with this package is
+more recent, you should use
+
+ ./configure --with-included-gettext
+
+to prevent auto-detection.
+
+ The configuration process will not test for the `catgets' function
+and therefore it will not be used. The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
+
+ Internationalized packages usually have many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+1.3 Using This Package
+======================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. If you happen to have the `LC_ALL' or some other
+`LC_xxx' environment variables set, you should unset them before
+setting `LANG', otherwise the setting of `LANG' will not have the
+desired effect. Here `LL' is an ISO 639 two-letter language code, and
+`CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your language by running the
+command `locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+1.4 Translating Teams
+=====================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://translationproject.org/', in the "Teams" area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to `sv-request@li.org', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `coordinator@translationproject.org' to
+reach the coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skills are praised more than
+programming skills, here.
+
+1.5 Available Packages
+======================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of November
+2007. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am ar az be bg bs ca cs cy da de el en en_GB eo
+ +----------------------------------------------------+
+ Compendium | [] [] [] [] |
+ a2ps | [] [] [] [] [] |
+ aegis | () |
+ ant-phone | () |
+ anubis | [] |
+ ap-utils | |
+ aspell | [] [] [] [] [] |
+ bash | [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | [] [] |
+ bison-runtime | [] |
+ bluez-pin | [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] [] [] |
+ console-tools | [] [] |
+ coreutils | [] [] [] [] |
+ cpio | |
+ cpplib | [] [] [] |
+ cryptonit | [] |
+ dialog | |
+ diffutils | [] [] [] [] [] [] |
+ doodle | [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] |
+ fetchmail | [] [] () [] [] |
+ findutils | [] |
+ findutils_stable | [] [] [] |
+ flex | [] [] [] |
+ fslint | |
+ gas | |
+ gawk | [] [] [] |
+ gcal | [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] |
+ gettext-tools | [] [] |
+ gip | [] |
+ gliv | [] [] |
+ glunarclock | [] |
+ gmult | [] [] |
+ gnubiff | () |
+ gnucash | [] [] () () [] |
+ gnuedu | |
+ gnulib | [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gpe-aerial | [] [] |
+ gpe-beam | [] [] |
+ gpe-calendar | |
+ gpe-clock | [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | |
+ gpe-edit | [] |
+ gpe-filemanager | |
+ gpe-go | [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] |
+ gpe-taskmanager | [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | |
+ gphoto2 | [] [] [] [] |
+ gprof | [] [] |
+ gpsdrive | |
+ gramadoir | [] [] |
+ grep | [] [] |
+ gretl | () |
+ gsasl | |
+ gss | |
+ gst-plugins-bad | [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] [] |
+ gst-plugins-ugly | [] [] |
+ gstreamer | [] [] [] [] [] [] [] |
+ gtick | () |
+ gtkam | [] [] [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] |
+ herrie | [] |
+ hylafax | |
+ idutils | [] [] |
+ indent | [] [] [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] [] |
+ iso_639 | [] [] [] [] |
+ jpilot | [] |
+ jtag | |
+ jwhois | |
+ kbd | [] [] [] [] |
+ keytouch | [] [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ latrine | () |
+ ld | [] |
+ leafpad | [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] |
+ libextractor | [] |
+ libgpewidget | [] [] [] |
+ libgpg-error | [] |
+ libgphoto2 | [] [] |
+ libgphoto2_port | [] [] |
+ libgsasl | |
+ libiconv | [] [] |
+ libidn | [] [] [] |
+ lifelines | [] () |
+ lilypond | [] |
+ lingoteach | |
+ lprng | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] |
+ make | [] [] |
+ man-db | [] [] [] |
+ minicom | [] [] [] |
+ nano | [] [] [] |
+ opcodes | [] |
+ parted | [] [] |
+ pilot-qof | |
+ popt | [] [] [] |
+ psmisc | [] |
+ pwdutils | |
+ qof | |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rpm | [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] [] |
+ sed | [] [] [] |
+ shared-mime-info | [] [] [] [] () [] [] [] |
+ sharutils | [] [] [] [] [] [] |
+ shishi | |
+ skencil | [] () |
+ solfege | |
+ soundtracker | [] [] |
+ sp | [] |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] |
+ texinfo | [] [] [] |
+ tin | () () |
+ tuxpaint | [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] |
+ util-linux-ng | [] [] [] [] |
+ vorbis-tools | [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] |
+ wget | [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] |
+ xpad | [] [] [] |
+ +----------------------------------------------------+
+ af am ar az be bg bs ca cs cy da de el en en_GB eo
+ 6 0 2 1 8 26 2 40 48 2 56 88 15 1 15 18
+
+ es et eu fa fi fr ga gl gu he hi hr hu id is it
+ +--------------------------------------------------+
+ Compendium | [] [] [] [] [] |
+ a2ps | [] [] [] () |
+ aegis | |
+ ant-phone | [] |
+ anubis | [] |
+ ap-utils | [] [] |
+ aspell | [] [] [] |
+ bash | [] |
+ bfd | [] [] |
+ bibshelf | [] [] [] |
+ binutils | [] [] [] |
+ bison | [] [] [] [] [] [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] [] |
+ console-tools | |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] |
+ cpplib | [] [] |
+ cryptonit | [] |
+ dialog | [] [] [] |
+ diffutils | [] [] [] [] [] [] [] [] [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] |
+ fetchmail | [] |
+ findutils | [] [] [] |
+ findutils_stable | [] [] [] [] |
+ flex | [] [] [] |
+ fslint | |
+ gas | [] [] |
+ gawk | [] [] [] [] () |
+ gcal | [] [] |
+ gcc | [] |
+ gettext-examples | [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] |
+ gip | [] [] [] [] |
+ gliv | () |
+ glunarclock | [] [] [] |
+ gmult | [] [] [] |
+ gnubiff | () () |
+ gnucash | () () () |
+ gnuedu | [] |
+ gnulib | [] [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | |
+ gpe-aerial | [] [] |
+ gpe-beam | [] [] |
+ gpe-calendar | |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] [] [] [] |
+ gpe-filemanager | [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] |
+ gpe-package | [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] |
+ gphoto2 | [] [] [] [] [] |
+ gprof | [] [] [] [] [] |
+ gpsdrive | [] |
+ gramadoir | [] [] |
+ grep | [] [] [] |
+ gretl | [] [] [] () |
+ gsasl | [] [] |
+ gss | [] [] |
+ gst-plugins-bad | [] [] [] [] |
+ gst-plugins-base | [] [] [] [] |
+ gst-plugins-good | [] [] [] [] [] |
+ gst-plugins-ugly | [] [] [] [] |
+ gstreamer | [] [] [] |
+ gtick | [] [] [] |
+ gtkam | [] [] [] [] |
+ gtkorphan | [] [] |
+ gtkspell | [] [] [] [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ herrie | [] |
+ hylafax | |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] [] [] [] |
+ iso_15924 | [] |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] |
+ iso_4217 | [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] |
+ jpilot | [] [] |
+ jtag | [] |
+ jwhois | [] [] [] [] [] |
+ kbd | [] [] |
+ keytouch | [] [] [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] [] |
+ latrine | [] [] |
+ ld | [] [] [] [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] [] |
+ libexif | [] |
+ libextractor | [] |
+ libgpewidget | [] [] [] [] [] |
+ libgpg-error | [] |
+ libgphoto2 | [] [] [] |
+ libgphoto2_port | [] [] |
+ libgsasl | [] [] |
+ libiconv | [] [] [] |
+ libidn | [] [] |
+ lifelines | () |
+ lilypond | [] [] [] |
+ lingoteach | [] [] [] |
+ lprng | |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] |
+ mailfromd | |
+ mailutils | [] [] |
+ make | [] [] [] [] [] [] [] [] |
+ man-db | [] |
+ minicom | [] [] [] [] |
+ nano | [] [] [] [] [] [] [] |
+ opcodes | [] [] [] [] |
+ parted | [] [] [] |
+ pilot-qof | |
+ popt | [] [] [] [] |
+ psmisc | [] [] |
+ pwdutils | |
+ qof | [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] [] |
+ rpm | [] [] |
+ screem | |
+ scrollkeeper | [] [] [] |
+ sed | [] [] [] [] [] |
+ shared-mime-info | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] |
+ solfege | [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] [] [] [] |
+ texinfo | [] [] [] |
+ tin | [] () |
+ tuxpaint | [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux | [] [] [] [] [] [] [] |
+ util-linux-ng | [] [] [] [] [] [] [] |
+ vorbis-tools | |
+ wastesedge | () |
+ wdiff | [] [] [] [] [] [] [] [] |
+ wget | [] [] [] [] [] [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ es et eu fa fi fr ga gl gu he hi hr hu id is it
+ 85 22 14 2 48 101 61 12 2 8 2 6 53 29 1 52
+
+ ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn
+ +--------------------------------------------------+
+ Compendium | [] |
+ a2ps | () [] [] |
+ aegis | () |
+ ant-phone | [] |
+ anubis | [] [] [] |
+ ap-utils | [] |
+ aspell | [] [] |
+ bash | [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | |
+ bison | [] [] [] |
+ bison-runtime | [] [] [] |
+ bluez-pin | [] [] [] |
+ cflow | |
+ clisp | [] |
+ console-tools | |
+ coreutils | [] |
+ cpio | [] |
+ cpplib | [] |
+ cryptonit | [] |
+ dialog | [] [] |
+ diffutils | [] [] [] |
+ doodle | |
+ e2fsprogs | [] |
+ enscript | [] |
+ fetchmail | [] [] |
+ findutils | [] |
+ findutils_stable | [] |
+ flex | [] [] |
+ fslint | |
+ gas | |
+ gawk | [] [] |
+ gcal | |
+ gcc | |
+ gettext-examples | [] [] [] |
+ gettext-runtime | [] [] [] |
+ gettext-tools | [] [] |
+ gip | [] [] |
+ gliv | [] |
+ glunarclock | [] [] |
+ gmult | [] [] [] |
+ gnubiff | |
+ gnucash | () () () |
+ gnuedu | |
+ gnulib | [] [] |
+ gnunet | |
+ gnunet-gtk | |
+ gnutls | [] |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-calendar | [] |
+ gpe-clock | [] [] [] |
+ gpe-conf | [] [] [] |
+ gpe-contacts | [] |
+ gpe-edit | [] [] [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | [] |
+ gphoto2 | [] [] |
+ gprof | [] |
+ gpsdrive | [] |
+ gramadoir | () |
+ grep | [] [] |
+ gretl | |
+ gsasl | [] |
+ gss | |
+ gst-plugins-bad | [] |
+ gst-plugins-base | [] |
+ gst-plugins-good | [] |
+ gst-plugins-ugly | [] |
+ gstreamer | [] |
+ gtick | [] |
+ gtkam | [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] |
+ herrie | [] |
+ hylafax | |
+ idutils | [] |
+ indent | [] [] |
+ iso_15924 | [] |
+ iso_3166 | [] [] [] [] [] [] [] [] |
+ iso_3166_2 | [] |
+ iso_4217 | [] [] [] |
+ iso_639 | [] [] [] [] |
+ jpilot | () () |
+ jtag | |
+ jwhois | [] |
+ kbd | [] |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | |
+ latrine | [] |
+ ld | |
+ leafpad | [] [] |
+ libc | [] [] [] |
+ libexif | |
+ libextractor | |
+ libgpewidget | [] |
+ libgpg-error | |
+ libgphoto2 | [] |
+ libgphoto2_port | [] |
+ libgsasl | [] |
+ libiconv | [] |
+ libidn | [] [] |
+ lifelines | [] |
+ lilypond | [] |
+ lingoteach | [] |
+ lprng | |
+ lynx | [] [] |
+ m4 | [] [] |
+ mailfromd | |
+ mailutils | |
+ make | [] [] [] |
+ man-db | |
+ minicom | [] |
+ nano | [] [] [] |
+ opcodes | [] |
+ parted | [] [] |
+ pilot-qof | |
+ popt | [] [] [] |
+ psmisc | [] [] [] |
+ pwdutils | |
+ qof | |
+ radius | |
+ recode | [] |
+ rpm | [] [] |
+ screem | [] |
+ scrollkeeper | [] [] [] [] |
+ sed | [] [] |
+ shared-mime-info | [] [] [] [] [] [] [] |
+ sharutils | [] [] |
+ shishi | |
+ skencil | |
+ solfege | () () |
+ soundtracker | |
+ sp | () |
+ system-tools-ba... | [] [] [] [] |
+ tar | [] [] [] |
+ texinfo | [] [] |
+ tin | |
+ tuxpaint | () [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] |
+ util-linux-ng | [] [] |
+ vorbis-tools | |
+ wastesedge | [] |
+ wdiff | [] [] |
+ wget | [] [] |
+ xchat | [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ ja ka ko ku ky lg lt lv mk mn ms mt nb ne nl nn
+ 51 2 25 3 2 0 6 0 2 2 20 0 11 1 103 6
+
+ or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
+ +--------------------------------------------------+
+ Compendium | [] [] [] [] [] |
+ a2ps | () [] [] [] [] [] [] |
+ aegis | () () |
+ ant-phone | [] [] |
+ anubis | [] [] [] |
+ ap-utils | () |
+ aspell | [] [] [] |
+ bash | [] [] |
+ bfd | |
+ bibshelf | [] |
+ binutils | [] [] |
+ bison | [] [] [] [] [] |
+ bison-runtime | [] [] [] [] [] |
+ bluez-pin | [] [] [] [] [] [] [] [] [] |
+ cflow | [] |
+ clisp | [] |
+ console-tools | [] |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] |
+ cpplib | [] |
+ cryptonit | [] [] |
+ dialog | [] |
+ diffutils | [] [] [] [] [] [] |
+ doodle | [] [] |
+ e2fsprogs | [] [] |
+ enscript | [] [] [] [] [] |
+ fetchmail | [] [] [] |
+ findutils | [] [] [] |
+ findutils_stable | [] [] [] [] [] [] |
+ flex | [] [] [] [] [] |
+ fslint | [] |
+ gas | |
+ gawk | [] [] [] [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext-examples | [] [] [] [] [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] [] [] [] |
+ gettext-tools | [] [] [] [] [] [] [] |
+ gip | [] [] [] [] |
+ gliv | [] [] [] [] [] [] |
+ glunarclock | [] [] [] [] [] [] |
+ gmult | [] [] [] [] |
+ gnubiff | () [] |
+ gnucash | () [] |
+ gnuedu | |
+ gnulib | [] [] [] |
+ gnunet | |
+ gnunet-gtk | [] |
+ gnutls | [] [] |
+ gpe-aerial | [] [] [] [] [] [] [] |
+ gpe-beam | [] [] [] [] [] [] [] |
+ gpe-calendar | [] [] [] [] |
+ gpe-clock | [] [] [] [] [] [] [] [] |
+ gpe-conf | [] [] [] [] [] [] [] |
+ gpe-contacts | [] [] [] [] [] |
+ gpe-edit | [] [] [] [] [] [] [] [] [] |
+ gpe-filemanager | [] [] |
+ gpe-go | [] [] [] [] [] [] [] [] |
+ gpe-login | [] [] [] [] [] [] [] [] |
+ gpe-ownerinfo | [] [] [] [] [] [] [] [] |
+ gpe-package | [] [] |
+ gpe-sketchbook | [] [] [] [] [] [] [] [] |
+ gpe-su | [] [] [] [] [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] [] [] [] [] |
+ gpe-timesheet | [] [] [] [] [] [] [] [] |
+ gpe-today | [] [] [] [] [] [] [] [] |
+ gpe-todo | [] [] [] [] |
+ gphoto2 | [] [] [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | [] [] |
+ gramadoir | [] [] |
+ grep | [] [] [] [] |
+ gretl | [] [] [] |
+ gsasl | [] [] [] |
+ gss | [] [] [] [] |
+ gst-plugins-bad | [] [] [] |
+ gst-plugins-base | [] [] |
+ gst-plugins-good | [] [] |
+ gst-plugins-ugly | [] [] [] |
+ gstreamer | [] [] [] [] |
+ gtick | [] |
+ gtkam | [] [] [] [] [] |
+ gtkorphan | [] |
+ gtkspell | [] [] [] [] [] [] [] [] |
+ gutenprint | [] |
+ hello | [] [] [] [] [] [] [] [] |
+ herrie | [] [] [] |
+ hylafax | |
+ idutils | [] [] [] [] [] |
+ indent | [] [] [] [] [] [] [] |
+ iso_15924 | |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_4217 | [] [] [] [] [] [] [] |
+ iso_639 | [] [] [] [] [] [] [] |
+ jpilot | |
+ jtag | [] |
+ jwhois | [] [] [] [] |
+ kbd | [] [] [] |
+ keytouch | [] |
+ keytouch-editor | [] |
+ keytouch-keyboa... | [] |
+ latrine | |
+ ld | [] |
+ leafpad | [] [] [] [] [] [] |
+ libc | [] [] [] [] |
+ libexif | [] [] |
+ libextractor | [] [] |
+ libgpewidget | [] [] [] [] [] [] [] [] |
+ libgpg-error | [] [] [] |
+ libgphoto2 | [] |
+ libgphoto2_port | [] [] [] |
+ libgsasl | [] [] [] [] |
+ libiconv | [] [] [] |
+ libidn | [] [] () |
+ lifelines | [] [] |
+ lilypond | |
+ lingoteach | [] |
+ lprng | [] |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailfromd | [] |
+ mailutils | [] [] [] |
+ make | [] [] [] [] |
+ man-db | [] [] [] [] |
+ minicom | [] [] [] [] [] |
+ nano | [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] |
+ pilot-qof | |
+ popt | [] [] [] [] |
+ psmisc | [] [] |
+ pwdutils | [] [] |
+ qof | [] [] |
+ radius | [] [] |
+ recode | [] [] [] [] [] [] [] |
+ rpm | [] [] [] [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ shared-mime-info | [] [] [] [] [] [] |
+ sharutils | [] [] [] [] |
+ shishi | [] |
+ skencil | [] [] [] |
+ solfege | [] |
+ soundtracker | [] [] |
+ sp | |
+ system-tools-ba... | [] [] [] [] [] [] [] [] [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] [] |
+ tin | () |
+ tuxpaint | [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] |
+ util-linux-ng | [] [] [] [] |
+ vorbis-tools | [] |
+ wastesedge | |
+ wdiff | [] [] [] [] [] [] [] |
+ wget | [] [] [] [] |
+ xchat | [] [] [] [] [] [] [] |
+ xkeyboard-config | [] [] [] |
+ xpad | [] [] [] |
+ +--------------------------------------------------+
+ or pa pl pt pt_BR rm ro ru rw sk sl sq sr sv ta
+ 0 5 77 31 53 4 58 72 3 45 46 9 45 122 3
+
+ tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
+ +---------------------------------------------------+
+ Compendium | [] [] [] [] | 19
+ a2ps | [] [] [] | 19
+ aegis | [] | 1
+ ant-phone | [] [] | 6
+ anubis | [] [] [] | 11
+ ap-utils | () [] | 4
+ aspell | [] [] [] | 16
+ bash | [] | 6
+ bfd | | 2
+ bibshelf | [] | 7
+ binutils | [] [] [] [] | 9
+ bison | [] [] [] [] | 20
+ bison-runtime | [] [] [] [] | 18
+ bluez-pin | [] [] [] [] [] [] | 28
+ cflow | [] [] | 5
+ clisp | | 9
+ console-tools | [] [] | 5
+ coreutils | [] [] [] | 18
+ cpio | [] [] [] [] | 11
+ cpplib | [] [] [] [] [] | 12
+ cryptonit | [] | 6
+ dialog | [] [] [] | 9
+ diffutils | [] [] [] [] [] | 29
+ doodle | [] | 6
+ e2fsprogs | [] [] | 10
+ enscript | [] [] [] | 16
+ fetchmail | [] [] | 12
+ findutils | [] [] [] | 11
+ findutils_stable | [] [] [] [] | 18
+ flex | [] [] | 15
+ fslint | [] | 2
+ gas | [] | 3
+ gawk | [] [] [] | 16
+ gcal | [] | 5
+ gcc | [] [] [] | 7
+ gettext-examples | [] [] [] [] [] [] | 29
+ gettext-runtime | [] [] [] [] [] [] | 28
+ gettext-tools | [] [] [] [] [] | 20
+ gip | [] [] | 13
+ gliv | [] [] | 11
+ glunarclock | [] [] [] | 15
+ gmult | [] [] [] [] | 16
+ gnubiff | [] | 2
+ gnucash | () [] | 5
+ gnuedu | [] | 2
+ gnulib | [] | 10
+ gnunet | | 0
+ gnunet-gtk | [] [] | 3
+ gnutls | | 4
+ gpe-aerial | [] [] | 14
+ gpe-beam | [] [] | 14
+ gpe-calendar | [] [] | 7
+ gpe-clock | [] [] [] [] | 21
+ gpe-conf | [] [] [] | 16
+ gpe-contacts | [] [] | 10
+ gpe-edit | [] [] [] [] [] | 22
+ gpe-filemanager | [] [] | 7
+ gpe-go | [] [] [] [] | 19
+ gpe-login | [] [] [] [] [] | 21
+ gpe-ownerinfo | [] [] [] [] | 21
+ gpe-package | [] | 6
+ gpe-sketchbook | [] [] | 16
+ gpe-su | [] [] [] [] | 21
+ gpe-taskmanager | [] [] [] [] | 21
+ gpe-timesheet | [] [] [] [] | 18
+ gpe-today | [] [] [] [] [] | 21
+ gpe-todo | [] [] | 8
+ gphoto2 | [] [] [] [] | 21
+ gprof | [] [] | 13
+ gpsdrive | [] | 5
+ gramadoir | [] | 7
+ grep | [] | 12
+ gretl | | 6
+ gsasl | [] [] [] | 9
+ gss | [] | 7
+ gst-plugins-bad | [] [] [] | 13
+ gst-plugins-base | [] [] | 11
+ gst-plugins-good | [] [] [] [] [] | 16
+ gst-plugins-ugly | [] [] [] | 13
+ gstreamer | [] [] [] | 18
+ gtick | [] [] | 7
+ gtkam | [] | 16
+ gtkorphan | [] | 7
+ gtkspell | [] [] [] [] [] [] | 27
+ gutenprint | | 4
+ hello | [] [] [] [] [] | 38
+ herrie | [] [] | 8
+ hylafax | | 0
+ idutils | [] [] | 15
+ indent | [] [] [] [] [] | 28
+ iso_15924 | [] [] | 4
+ iso_3166 | [] [] [] [] [] [] [] [] [] | 54
+ iso_3166_2 | [] [] | 4
+ iso_4217 | [] [] [] [] [] | 24
+ iso_639 | [] [] [] [] [] | 26
+ jpilot | [] [] [] [] | 7
+ jtag | [] | 3
+ jwhois | [] [] [] | 13
+ kbd | [] [] [] | 13
+ keytouch | [] | 8
+ keytouch-editor | [] | 5
+ keytouch-keyboa... | [] | 5
+ latrine | [] [] | 5
+ ld | [] [] [] [] | 10
+ leafpad | [] [] [] [] [] | 24
+ libc | [] [] [] | 19
+ libexif | [] | 5
+ libextractor | [] | 5
+ libgpewidget | [] [] [] | 20
+ libgpg-error | [] | 6
+ libgphoto2 | [] [] | 9
+ libgphoto2_port | [] [] [] | 11
+ libgsasl | [] | 8
+ libiconv | [] [] | 11
+ libidn | [] [] | 11
+ lifelines | | 4
+ lilypond | [] | 6
+ lingoteach | [] | 6
+ lprng | [] | 2
+ lynx | [] [] [] | 15
+ m4 | [] [] [] | 18
+ mailfromd | [] [] | 3
+ mailutils | [] [] | 8
+ make | [] [] [] | 20
+ man-db | [] | 9
+ minicom | [] | 14
+ nano | [] [] [] | 20
+ opcodes | [] [] | 10
+ parted | [] [] [] | 11
+ pilot-qof | [] | 1
+ popt | [] [] [] [] | 18
+ psmisc | [] [] | 10
+ pwdutils | [] | 3
+ qof | [] | 4
+ radius | [] [] | 7
+ recode | [] [] [] | 25
+ rpm | [] [] [] [] | 13
+ screem | [] | 2
+ scrollkeeper | [] [] [] [] | 26
+ sed | [] [] [] [] | 23
+ shared-mime-info | [] [] [] | 29
+ sharutils | [] [] [] | 23
+ shishi | [] | 3
+ skencil | [] | 7
+ solfege | [] | 3
+ soundtracker | [] [] | 9
+ sp | [] | 3
+ system-tools-ba... | [] [] [] [] [] [] [] | 38
+ tar | [] [] [] | 17
+ texinfo | [] [] [] | 15
+ tin | | 1
+ tuxpaint | [] [] [] | 19
+ unicode-han-tra... | | 0
+ unicode-transla... | | 2
+ util-linux | [] [] [] | 20
+ util-linux-ng | [] [] [] | 20
+ vorbis-tools | [] [] | 4
+ wastesedge | | 1
+ wdiff | [] [] | 23
+ wget | [] [] [] | 20
+ xchat | [] [] [] [] | 29
+ xkeyboard-config | [] [] [] | 14
+ xpad | [] [] [] | 15
+ +---------------------------------------------------+
+ 76 teams tg th tk tr uk ven vi wa xh zh_CN zh_HK zh_TW zu
+ 163 domains 0 3 1 74 51 0 143 21 1 57 7 45 0 2036
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If November 2007 seems to be old, you may fetch a more recent copy
+of this `ABOUT-NLS' file on most GNU archive sites. The most
+up-to-date matrix with full percentage details can be found at
+`http://translationproject.org/extra/matrix.html'.
+
+1.6 Using `gettext' in new packages
+===================================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
+`coordinator@translationproject.org' to make the `.pot' files available
+to the translation teams.
+
diff --git a/libgpg-error-1.10/AUTHORS b/libgpg-error-1.10/AUTHORS
new file mode 100644
index 0000000..2035b5d
--- /dev/null
+++ b/libgpg-error-1.10/AUTHORS
@@ -0,0 +1,46 @@
+Package: libgpg-error
+Maintainer: Marcus Brinkmann <marcus@g10code.com>
+Bug reports: bug-gnupg@gnupg.org
+Security related bug reports: security@gnupg.org
+License (library): LGPLv2.1+
+License (tools): GPLv2+ with exception
+
+
+Aron Xu <happyaron.xu@gmail.com>
+ - TRANSLATION [zh_CN]
+
+Clytie Siddall <clytie@riverland.net.au>
+ - TRANSLATION [vi]
+
+Daniel Nylander <po@danielnylander.se>
+ - TRANSLATION [sv]
+
+Francesco Groccia <fgr@anche.no>
+ - TRANSLATION [it]
+
+g10 Code GmbH <code@g10code.com>
+ - Design and implementation.
+
+Jakub Bogusz <qboosh@pld-linux.org>
+ - TRANSLATION [pl]
+
+Laurentiu Buzdugan <lbuz@rolix.org>
+ - TRANSLATION [ro]
+
+Petr Pisar <petr.pisar@atlas.cz>
+ - TRANSLATION [cs]
+
+
+The RPM specs file libgpg-error.spec has been contributed by
+Robert Schiele <rschiele@uni-mannheim.de>
+
+
+ Copyright 2003, 2004, 2005, 2006, 2007 g10 Code GmbH
+
+ This file is free software; as a special exception the author gives
+ unlimited permission to copy and/or distribute it, with or without
+ modifications, as long as this notice is preserved.
+
+ This file is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+ implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/libgpg-error-1.10/COPYING b/libgpg-error-1.10/COPYING
new file mode 100644
index 0000000..623b625
--- /dev/null
+++ b/libgpg-error-1.10/COPYING
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff --git a/libgpg-error-1.10/COPYING.LIB b/libgpg-error-1.10/COPYING.LIB
new file mode 100644
index 0000000..2d2d780
--- /dev/null
+++ b/libgpg-error-1.10/COPYING.LIB
@@ -0,0 +1,510 @@
+
+ GNU LESSER GENERAL PUBLIC LICENSE
+ Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL. It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+ This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it. You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations
+below.
+
+ When we speak of free software, we are referring to freedom of use,
+not price. Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+ To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights. These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+ For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you. You must make sure that they, too, receive or can get the source
+code. If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it. And you must show them these terms so they know their rights.
+
+ We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+ To protect each distributor, we want to make it very clear that
+there is no warranty for the free library. Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+ Finally, software patents pose a constant threat to the existence of
+any free program. We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder. Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+ Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License. This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License. We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+ When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library. The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom. The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+ We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License. It also provides other free software developers Less
+of an advantage over competing non-free programs. These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries. However, the Lesser license provides advantages in certain
+special circumstances.
+
+ For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it
+becomes a de-facto standard. To achieve this, non-free programs must
+be allowed to use the library. A more frequent case is that a free
+library does the same job as widely used non-free libraries. In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+ In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software. For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+ Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+ The precise terms and conditions for copying, distribution and
+modification follow. Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library". The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+ GNU LESSER GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+ A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+ The "Library", below, refers to any such software library or work
+which has been distributed under these terms. A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language. (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+ "Source code" for a work means the preferred form of the work for
+making modifications to it. For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control
+compilation and installation of the library.
+
+ Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it). Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+
+ 1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+ You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+ 2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) The modified work must itself be a software library.
+
+ b) You must cause the files modified to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ c) You must cause the whole of the work to be licensed at no
+ charge to all third parties under the terms of this License.
+
+ d) If a facility in the modified Library refers to a function or a
+ table of data to be supplied by an application program that uses
+ the facility, other than as an argument passed when the facility
+ is invoked, then you must make a good faith effort to ensure that,
+ in the event an application does not supply such function or
+ table, the facility still operates, and performs whatever part of
+ its purpose remains meaningful.
+
+ (For example, a function in a library to compute square roots has
+ a purpose that is entirely well-defined independent of the
+ application. Therefore, Subsection 2d requires that any
+ application-supplied function or table used by this function must
+ be optional: if the application does not supply it, the square
+ root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library. To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License. (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.) Do not make any other change in
+these notices.
+
+ Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+ This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+ 4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+ If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library". Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+ However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library". The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+ When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library. The
+threshold for this to be true is not precisely defined by law.
+
+ If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work. (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+ Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+ 6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+ You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License. You must supply a copy of this License. If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License. Also, you must do one
+of these things:
+
+ a) Accompany the work with the complete corresponding
+ machine-readable source code for the Library including whatever
+ changes were used in the work (which must be distributed under
+ Sections 1 and 2 above); and, if the work is an executable linked
+ with the Library, with the complete machine-readable "work that
+ uses the Library", as object code and/or source code, so that the
+ user can modify the Library and then relink to produce a modified
+ executable containing the modified Library. (It is understood
+ that the user who changes the contents of definitions files in the
+ Library will not necessarily be able to recompile the application
+ to use the modified definitions.)
+
+ b) Use a suitable shared library mechanism for linking with the
+ Library. A suitable mechanism is one that (1) uses at run time a
+ copy of the library already present on the user's computer system,
+ rather than copying library functions into the executable, and (2)
+ will operate properly with a modified version of the library, if
+ the user installs one, as long as the modified version is
+ interface-compatible with the version that the work was made with.
+
+ c) Accompany the work with a written offer, valid for at least
+ three years, to give the same user the materials specified in
+ Subsection 6a, above, for a charge no more than the cost of
+ performing this distribution.
+
+ d) If distribution of the work is made by offering access to copy
+ from a designated place, offer equivalent access to copy the above
+ specified materials from the same place.
+
+ e) Verify that the user has already received a copy of these
+ materials or that you have already sent this user a copy.
+
+ For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it. However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+ It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system. Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+ 7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+ a) Accompany the combined library with a copy of the same work
+ based on the Library, uncombined with any other library
+ facilities. This must be distributed under the terms of the
+ Sections above.
+
+ b) Give prominent notice with the combined library of the fact
+ that part of it is a work based on the Library, and explaining
+ where to find the accompanying uncombined form of the same work.
+
+ 8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License. Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License. However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+ 9. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Library or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+ 10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+ 11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all. For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply, and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License
+may add an explicit geographical distribution limitation excluding those
+countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation. If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+ 14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission. For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this. Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+ NO WARRANTY
+
+ 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+ 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Libraries
+
+ If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change. You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms
+of the ordinary General Public License).
+
+ To apply these terms, attach the following notices to the library.
+It is safest to attach them to the start of each source file to most
+effectively convey the exclusion of warranty; and each file should
+have at least the "copyright" line and a pointer to where the full
+notice is found.
+
+
+ <one line to give the library's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or
+your school, if any, to sign a "copyright disclaimer" for the library,
+if necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the
+ library `Frob' (a library for tweaking knobs) written by James
+ Random Hacker.
+
+ <signature of Ty Coon>, 1 April 1990
+ Ty Coon, President of Vice
+
+That's all there is to it!
+
+
diff --git a/libgpg-error-1.10/ChangeLog b/libgpg-error-1.10/ChangeLog
new file mode 100644
index 0000000..e5a7837
--- /dev/null
+++ b/libgpg-error-1.10/ChangeLog
@@ -0,0 +1,1134 @@
+2010-10-26 Werner Koch <wk@g10code.com>
+
+ Release 1.10.
+
+ * configure.ac: Set LT version to C8/A8/R0.
+ * config.guess: Update to version 2010-09-24.
+ * config.sub: Update to version 2010-09-11.
+
+2010-10-20 Werner Koch <wk@g10code.com>
+
+ * potomo: New. Copied from GnuPG.
+ * Makefile.am (install-data-hook) [W32]: New.
+
+ * src/init.c (get_locale_dir): Strip the "bin" part.
+ * src/gpg-error.c (get_locale_dir): Ditto.
+
+2010-09-30 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in: Add GPG_ERR_FULLY_CANCELED.
+
+2010-09-16 Werner Koch <wk@g10code.com>
+
+ * src/w32-gettext.c (module_init): Do not set a constructur if not
+ build as DLL.
+ (_gpg_w32__init_gettext_module): New.
+
+2010-09-16 gettextize <bug-gnu-gettext@gnu.org>
+
+ * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.17.
+
+2010-09-16 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in: Add GPG_ERR_MISSING_ISSUER_CERT.
+
+ * src/Makefile.am (err-sources.h, err-codes.h): Built them in the
+ source directory.
+
+2010-09-02 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in: Add GPG_ERR_NOT_INITIALIZED.
+
+2010-08-19 Werner Koch <wk@g10code.com>
+
+ * configure.ac (AH_BOTTOM): Define GPG_ERR_ENABLE_ERRNO_MACROS.
+ * src/w32ce-add.h (strerror) [!GPG_ERR_ENABLE_ERRNO_MACROS]: Do
+ not define.
+
+2010-07-21 Werner Koch <wk@g10code.com>
+
+ Release 1.9.
+
+ * configure.ac: Set LT version to C7/A7/R0.
+
+2010-07-20 Werner Koch <wk@g10code.com>
+
+ * src/init.c (DllMain) [!DLL_EXPORT]: Do not build.
+ (gpg_err_init) [W32][!DLL_EXPORT]: Init TLS.
+ (gpg_err_deinit): New.
+ * src/gpg-error.def.in: Add gpg_err_deinit.
+ * src/gpg-error.h.in: Add gpg_err_deinit.
+
+2010-07-05 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in (GPG_ERR_TOO_MANY, GPG_ERR_LIMIT_REACHED): New.
+
+2010-06-18 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in (GPG_ERR_MISSING_KEY): New.
+
+2010-05-06 Werner Koch <wk@g10code.com>
+
+ Release 1.8.
+
+ * configure.ac: Set LT version to C6/A6/R0.
+
+2010-04-14 Werner Koch <wk@g10code.com>
+
+ * src/init.c (_gpg_w32ce_get_errno): Add native error mapping.
+ * src/Makefile.am (mkw32errmap.map.c): New.
+ * src/mkw32errmap.c (struct table_s): Add field W32CODE2.
+ (table): Init this field.
+ (main): Add option --map.
+
+2010-03-15 Werner Koch <wk@g10code.com>
+
+ * src/mkheader.awk: Add emacs local-var line.
+
+ * src/w32-add.h (gettext_localename): Fix type in name.
+
+2010-03-09 Werner Koch <wk@g10code.com>
+
+ * src/w32-add.h [!GPG_ERR_ENABLE_GETTEXT_MACROS]: Do not provide
+ gettext macros.
+
+2010-03-08 Werner Koch <wk@g10code.com>
+
+ * src/w32-add.h (_GPG_ERR_ATTR_FORMAT_ARG): New.
+ (_gpg_w32_gettext, _gpg_w32_dgettext, _gpg_w32_dngettext): Use it.
+
+2010-03-01 Werner Koch <wk@g10code.com>
+
+ * src/mkw32errmap.c: Map ESPIPE.
+
+2010-02-17 Werner Koch <wk@g10code.com>
+
+ * src/Makefile.am: Revert last change.
+ (gpg_extra_headers): New.
+ (nobase_include_HEADERS): Rename to include_HEADERS and remove
+ extra_headers.
+ (mkerrcodes.h): Depend on gpg_extra_headers.
+ (install-data-local): New.
+ (gpg-extra/errno.h): Create gpg-extra dir if needed.
+
+2010-02-17 Werner Koch <wk@g10code.com>
+
+ * src/Makefile.am (extra_headers): Remove.
+
+2010-01-21 Werner Koch <wk@g10code.com>
+
+ * configure.ac (have_w32ce_system): Initialize to no.
+
+ * src/mkstrtable.awk (END): Do not print PREFIX before
+ LAST_MSGSTR.
+
+ * src/init.c (get_locale_dir): Rework to match what gnupg is doing.
+ (get_root_key, read_w32_registry_string): Remove.
+ * src/gpg-error.c (get_locale_dir): Replace by code from init.c
+ (get_root_key, read_w32_registry_string): Remove.
+
+2010-01-20 Werner Koch <wk@g10code.com>
+
+ * src/init.c (gpg_err_init): Factor code out to ..
+ (real_init): .. new.
+
+ * src/Makefile.am (gpg_error_SOURCES): Remove arch_sources.
+ (export_symbols): Do not prefix gpg-error-def with srcdir.
+
+2010-01-19 Werner Koch <wk@g10code.com>
+
+ * src/init.c (DllMain): Call _w32_gettext_init.
+ (get_tls): Use it also for standard Windows.
+ (DllMain): Ditto.
+ (struct tls_space_s): Move to ..
+ (get_tls): Make global.
+ * src/init.h: .. New.
+ * src/gettext.h: Do not include w32-gettext.h.
+ * src/w32-gettext.c: Replace by version from GnuPG.
+ (my_nl_locale_name) [W32CE]: Do not use getenv. Use
+ GetSystemDefaultLCID.
+ (struct loaded_domain): Use uint16_t for NSTRINGS and MAPPED to
+ save space.
+ (load_domain): Check for too large MO files.
+ (utf8_to_wchar): Use gpg_err_set_errno.
+ (bindtextdomain): Rename to _gpg_w32_bindtextdomain.
+ (textdomain): Rename to _gpg_w32_textdomain.
+ (gettext): Rename to _gpg_w32_gettext.
+ (dgettext): Rename to _gpg_w32_dgettext.
+ (ngettext): Remove.
+ (gettext_localename): Rename to _gpg_w32_gettext_localename.
+ (gettext_select_utf8): Rename to _gpg_w32_gettext_use_utf8.
+ (_gpg_w32_bindtextdomain): Change to only register the directory.
+ Return the current directory if asked to.
+ (do_gettext): Add DOMAINNAME arg and take care of it.
+ * src/w32-add.h: New.
+ * src/w32-gettext.h: Remove.
+ * src/Makefile.am (extra-h.in): Process w32-add.h.
+ (arch_sources): Remove w32-gettext.h.
+
+2010-01-18 Werner Koch <wk@g10code.com>
+
+ * src/init.c (wchar_to_utf8, utf8_to_wchar): New.
+
+ * src/gpg-error.c (main): Add option --list.
+
+2010-01-18 Werner Koch <wk@g10code.com>
+
+ * ltmain.sh (wrappers_required): Don't set for mingw32ce.
+
+ * tests/Makefile.am (extra_includes): New.
+ * tests/t-syserror.c (main): Use gpg_err_set_errno.
+
+ * src/w32ce-add.h: New.
+ * src/Makefile.am (EXTRA_DIST): Add it
+ (extra-h.in): New rule
+ (gpg-error.h): Pass extra-h.in to mkheader.
+ * src/mkheader.awk (extra_body): New.
+
+ * src/gpg-error.c (get_err_from_number): Use gpg_err_set_errno.
+
+ * src/mkw32errmap.c: New
+ * src/gpg-error.def: Rename to ..
+ * src/gpg-error.def.in: .. this.
+ (_gpg_errno_location): New.
+ * src/init.c (struct tls_space_s, tls_index): New.
+ (get_tls, _gpg_errno_location, DllMain): New.
+ (read_w32_registry_string) [W32CE]: Don't expand envvars.
+ (_gpg_w32ce_strerror): New.
+ * src/Makefile.am (extra_headers, extra_cppflags): New.
+ (include_HEADERS): Add extra_headers. Prefix with nobase_.
+ (libgpg_error_la_CPPFLAGS, gpg_error_CPPFLAGS)
+ (mkerrcodes.h): Add extra_cppflags.
+ (RCCOMPILE): Replace libgpg_error_la_CPPFLAGS by direct inclusion
+ of -DLOCALEDIR.
+ * configure.ac (HAVE_W32CE_SYSTEM): New AM_CONDITIONAL and
+ AC_DEFINE.
+ (GPG_ERROR_CONFIG_ISUBDIRAFTER): New.
+ * src/gpg-error-config.in <--libs>: Replace fixed -lgpg-error
+ by subst variable.
+ (isubdirafter): New.
+ <--cflags>: Take subst variable in account. Add idirafter stuff.
+
+2009-10-26 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.h.in (GPG_ERR_SOURCE_DIM): Reduce to 128.
+
+2009-09-29 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in (GPG_ERR_NO_ENGINE): New.
+
+2009-09-21 Werner Koch <wk@g10code.com>
+
+ * src/err-sources.h.in (GPG_ERR_SOURCE_G13): New.
+
+2009-08-20 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in: s/octadecimal/octal/. Reported by Petr Pisar.
+
+2009-07-23 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in: Add GPG_ERR_NOT_ENABLED.
+
+2009-07-17 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/mkerrnos.awk: Output code to cause WSA Errors to be found
+ from gpg error codes.
+ * README: Add problem of translating error codes back and forth.
+
+ * src/mkerrcodes1.awk: Output code to cause WSA Errors to be
+ transparently translated.
+ * src/code-from-errno.c [HAVE_W32_SYSTEM]: Don't include winsock2.h.
+ (w32_special_errnos) [HAVE_W32_SYSTEM]: Removed.
+ (gpg_err_code_from_errno) [HAVE_W32_SYSTEM]: Remove special case.
+ * README: Document problem with printing some WSA Errors.
+
+2009-06-23 Marcus Brinkmann <marcus@g10code.de>
+
+ Update to libtool 2.2.6a.
+ * configure.ac: Invoke AC_CONFIG_MACRO_DIR.
+ (AC_LIBTOOL_WIN32_DLL, AC_LIBTOOL_RC): Replace by ...
+ (LT_PREREQ, LT_INIT, LT_LANG): ... these.
+ * config.guess, config.sub, install-sh, ltmain.sh, m4/libtool.m4:
+ Updated to libtool 2.2.6a.
+ * m4/ltoptions.m4, m4/ltsugar.m4, m4/ltversion.m4,
+ m4/lt~obsolete.m4: New files from libtool 2.2.6a.
+ * src/Makefile.am (LTRCCOMPILE): Refactor with ...
+ (RCCOMPILE): ... this new macro. Add $(libgpg_error_la_CPPFLAGS).
+ (SUFFIXES): Add .lo.
+ (.rc.o): Change to ...
+ (.rc.lo): ... this implicit rule.
+ (gpg_error_res_ldflag): Removed.
+ (gpg_error_res): Use libtool object file name here.
+ (install-def-file): Fix typo.
+ (libgpg_error_la_LDFLAGS): Remove gpg_error_res_ldflag usage.
+ (libgpg_error_la_LIBADD): Add gpg_error_res.
+
+2008-11-26 Werner Koch <wk@g10code.com>
+
+ Release 1.7.
+
+ * configure.ac: Set LT version to C5/A5/R0.
+
+2008-11-12 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in: Add GPG_ERR_NO_PASSPHRASE and GPG_ERR_NO_PIN.
+
+2008-11-08 Moritz <moritz@gnu.org>
+
+ * lang/cl/gpg-error.lisp ("gpg_err_code_from_syserror"): Fix
+ defcfun: removed "(void)".
+
+ * lang/cl/gpg-error.lisp (size-t): Wrong call to defctype:
+ function accepts optional, not keyword argument.
+ (gpg-error-t): Likewise.
+
+2008-10-29 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/mkstrtable.awk: Make generated code -W clean to silence gcc
+ warnings.
+
+2008-08-06 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in (GPG_ERR_NOT_OPERATIONAL): New.
+
+2008-04-01 Werner Koch <wk@g10code.com>
+
+ * configure.ac (AC_INIT): Fix m4 quoting.
+
+2007-12-11 Werner Koch <wk@g10code.com>
+
+ * Makefile.am (EXTRA_DIST): Add COPYING.
+
+2007-10-29 Werner Koch <wk@g10code.com>
+
+ Released 1.6.
+
+ * configure.ac: Set LT version to C4/A4/R0.
+
+ * config.guess, config.sub: Updated.
+
+ * src/err-sources.h.in: (GPG_ERR_SOURCE_KLEO): New.
+
+ * w32-gettext.c (SUBLANG_BENGALI_BANGLADESH): Fix to 2 as per MSDN.
+ (SUBLANG_PUNJABI_PAKISTAN): Remove as it is not in MSDN.
+ (SUBLANG_ROMANIAN_MOLDOVA): Remove as it is not in MSDN.
+ (SUBLANG_ROMANIAN_ROMANIA): Change to value 1 as per MSDN.
+
+2007-09-27 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/Makefile.am (%.o): Replace pattern rule with suffix rule.
+ (SUFFIXES): New variable.
+
+2007-09-27 Werner Koch <wk@g10code.com>
+
+ * src/err-sources.h.in (GPG_ERR_SOURCE_GPA): New.
+ * src/err-codes.h.in (GPG_ERR_UNFINISHED): New.
+
+2007-08-03 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac: Call AM_PROG_CC_C_O. Allow --disable-languages.
+ * autogen.sh: Use = not == in test.
+ * lang/cl/Makefile.am: Do not use :=, but =.
+ * Makefile.am [!LANGUAGES_SOME]: Don't add lang to subdirs.
+ * m4/inttypes-h.m4, m4/lock.m4, m4/visibility.m4: New files.
+
+2007-05-19 Marcus Brinkmann <marcus@g10code.de>
+
+ * lang/cl/gpg-error.lisp (gpg-err-source-t): Add
+ :gpg-err-source-any.
+
+2007-06-18 Werner Koch <wk@g10code.com>
+
+ * src/code-from-errno.c (w32_special_errnos) [W32]: New. This is
+ to provide some common mappings for winsocket error codes.
+ (gpg_err_code_from_errno, gpg_err_code_from_syserror): Use it.
+
+2007-05-09 Werner Koch <wk@g10code.com>
+
+ * src/gpg-error.m4: Print found version on success.
+
+2006-12-09 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/Makefile.am (EXTRA_DIST): Add README.
+ * src/README: New file.
+
+2006-12-01 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.c (get_err_from_number): Fix last change.
+
+ * src/gpg-error.c (get_err_from_number): Support source and code
+ number in split format like "7.17".
+
+2006-11-30 Werner Koch <wk@g10code.com>
+
+ Released 1.5.
+
+ * configure.ac: Set LT version to C3/A3/R1.
+
+ * README: Switch to tar.bz2 and sha1sum.
+
+ * src/gpg-error.c (main): Add option --version.
+
+ * autogen.sh (FORCE): Add option --force.
+
+ * intl/: Removed.
+ * Makefile.am (SUBDIRS): Removed intl.
+ * configure.ac (AM_GNU_GETTEXT): Use external flag
+ * src/Makefile.am: Removed -I../intl.
+
+2006-11-23 Werner Koch <wk@g10code.com>
+
+ * configure.ac: Display configuration status after AC_OUTPUT.
+ (AC_INIT): Use SVN revision magic.
+ (AC_GNU_SOURCE): New.
+
+2006-11-23 gettextize <bug-gnu-gettext@gnu.org>
+
+ * configure.ac (AM_GNU_GETTEXT_VERSION): Bump to 0.15.
+
+2006-11-15 Werner Koch <wk@g10code.com>
+
+ * autogen.sh: Add convenience option --build-amd64.
+
+2006-10-20 Werner Koch <wk@g10code.com>
+
+ * Makefile.am (stowinstall): New convenience target.
+
+2006-09-18 Werner Koch <wk@g10code.com>
+
+ * src/gpg-error.def: Added gpg_err_code_from_syserror.
+
+2006-09-14 Werner Koch <wk@g10code.com>
+
+ Released 1.4.
+
+ * configure.ac: Set LT version to C3/A3/R0.
+ (AB_INIT): New.
+
+ * autogen.sh (--build-w32): Better cross-compiler locating.
+
+ * src/strerror.c (system_strerror_r): Made static.
+
+ * tests/t-syserror.c: New.
+ * tests/Makefile.am (TESTS): Added new test.
+
+ * lang/cl/gpg-error.lisp ("gpg_err_code_from_syserror"): New.
+ (gpg-err-code-from-syserror): New.
+ (gpg-error-from-syserror): New.
+ * lang/cl/gpg-error-package.lisp: Export new functions
+
+ * src/gpg-error.h.in (gpg_error_from_syserror): New.
+ * src/code-from-errno.c (gpg_err_code_from_errno): Cosmetic change
+ to first check whether ERR is zero.
+ (gpg_err_code_from_syserror): New.
+
+2006-09-06 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in: Add GPG_ERR_UNKNOWN_OPTION and
+ GPG_ERR_UNKNOWN_COMMAND.
+
+2006-09-05 Werner Koch <wk@g10code.com>
+
+ * src/err-sources.h.in (GPG_ERR_SOURCE_ANY): New. This is so that
+ we have source distinguished from the Unknown one but declaring
+ that it is an gpg-error style error code.
+
+ * src/err-codes.h.in: Added GPG_ERR_ASS_* codes, rabnge 257-281.
+ (GPG_ERR_MISSING_ERRNO): New.
+
+2006-07-04 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/init.c (get_locale_dir): Return NULL instead of garbage.
+ * src/gpg-error.c (get_locale_dir): Likewise.
+ Reported by Simon Josefsson <jas@extundo.com>.
+
+2006-05-30 Marcus Brinkmann <marcus@g10code.de>
+
+ * lang/cl/gpg-error.asd.in (gpg-error): Add "depends-on" on cffi.
+
+2006-05-29 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/init.c (gpg_err_init) [!ENABLE_NLS]: Do not initialize the
+ locale.
+ * src/gpg-error.c (i18n_init) [!ENABLE_NLS]: Likewise.
+ Patch submitted by Nils Durner <ndurner@web.de>.
+
+2006-05-25 Marcus Brinkmann <marcus@g10code.de>
+
+ * lang/cl/gpg-error.asd: Renamed to ...
+ * lang/cl/gpg-error.asd.in: ... this.
+ * configure.ac (AC_CONFIG_FILES): Add lang/cl/gpg-error.asd.in.
+
+ * lang/cl/mkerrcodes.awk, lang/cl/gpg-error-package.lisp,
+ lang/cl/gpg-error.lisp, lang/cl/gpg-error.asd, lang/cl/Makefile.am
+ (clfilesdir): Fix package and file names.
+
+ * lang/cl/Makefile.am (clfilesdir): Use datadir, not prefix.
+
+2006-05-05 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac (AC_CONFIG_FILES): Add lang/Makefile and
+ lang/cl/Makefile.
+ * Makefile.am (SUBDIRS): Add lang.
+ * lang: New directory.
+ * lang/README, lang/Makefile.am: New files.
+ * lang/cl: New directory.
+ * lang/cl/Makefile.am, lang/cl/README, lang/cl/gpg-error.asd,
+ lang/cl/gpg-error-package.lisp, lang/cl/gpg-error.lisp,
+ lang/cl/mkerrcodes.awk: New files.
+
+2006-03-14 Marcus Brinkmann <marcus@g10code.de>
+
+ Released 1.3.
+
+ * configure.ac (LIBGPG_ERROR_LT_REVISION): Bump for release.
+
+ Many files regenerated.
+ * src/Makefile.am (gpg_error_CPPFLAGS, libgpg_error_la_CPPFLAGS):
+ Add -I../intl.
+ * Makefile.am (SUBDIRS): Add intl.
+ * configure.ac (AC_CONFIG_FILES): Add intl/Makefile.
+ (AM_GNU_GETTEXT_VERSION): Bump to 0.14.5.
+
+2006-03-06 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac (min_automake_version): Bump to 1.9.6.
+ * mkinstalldirs, depcomp, compile, INSTALL, COPYING, missing,
+ install-sh: Update from automake 1.9.6.
+ ltmain.sh: Update from libtool 1.5.22.
+
+2006-03-03 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac (LIBGPG_ERROR_LT_CURRENT, LIBGPG_ERROR_LT_AGE):
+ Bump for release.
+ (LIBGPG_ERROR_LT_REVISION): Reset to 0 for release.
+
+2005-11-02 Werner Koch <wk@g10code.com>
+
+ * src/Makefile.am (gpg_error_SOURCES): Include ARCH_SOURCES.
+ * src/gpg-error.c [W32]: Include gettext.h instead of libintl.h.
+
+ * configure.ac (AH_BOTTOM): Define ENABLE_NLS for W32 builds.
+ * src/w32-gettext.h (dgettext): Changed prototype from
+ libintl_dgettext.
+ * src/w32-gettext.c: Replaced use of WIN32 by HAVE_W32_SYSTEM on
+ demand of the holy GNUquisition.
+ (bindtextdomain, textdomain, dgettext): Need to cast the const way
+ from the return value.
+
+2005-10-26 Werner Koch <wk@g10code.com>
+
+ * Makefile.am: Used dist-bzip2 option.
+
+2005-10-25 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/w32-gettext.c (get_string): Remove extra arguments to
+ utf8_to_native_invocation.
+ (utf8_to_wchar, wchar_to_native): New function.
+ (utf8_to_native): Rewritten.
+
+ * src/Makefile.am (gpg_error_CPPFLAGS): New variable.
+ * src/gpg-error.c (i18n_init): Don't return anything.
+
+ * src/Makefile.am (arch_sources): New variable.
+ (libgpg_error_la_SOURCES): Add $(arch_sources).
+ * src/gettext.h [HAVE_W32_SYSTEM]: Include w32-gettext.h.
+ * src/w32-gettext.h: New file.
+ * src/w32-gettext.c: New file.
+ * src/gpg-error.h.in: Check for gcc's constructor attribute.
+ Use it for gpg_err_init.
+ (GPG_ERR_INITIALIZED): Define if constructor is available.
+ * src/gpg-error.c (main) [GPG_ERR_INITIALIZED]: Don't invoke
+ gpg_err_init.
+ (i18n_init): Call bindtextdomain as well. Now that gpg-error has
+ its own gettext implementation, we can't rely on it anymore.
+ Also, repeat all the w32 stuff for fetching the registry.
+
+2005-10-23 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/Makefile.am (libgpg_error_la_SOURCES): Add init.c.
+ * src/init.c: New file.
+ * src/gpg-error.h.in (gpg_error_init): New function.
+ * src/gpg-error.def: Add gpg_err_init.
+ * src/gpg-error.c: Remove SIMPLE_GETTEXT stuff.
+ (i18n_init): Don't bind text domain.
+ (main): Call gpg_err_init.
+
+2005-10-20 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac: Instead checking for windres and dlltool, invoke
+ AC_LIBTOOL_WIN32_DLL and AC_LIBTOOL_RC.
+ * src/Makefile.am [HAVE_W32_SYSTEM]: Use libtool, which simplifies
+ the rules.
+
+2005-10-02 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac: Escape arguments in AC_INIT invocation.
+ * config.guess, config.sub, ltmain.sh: Update.
+
+2005-08-19 Werner Koch <wk@g10code.com>
+
+ * configure.ac: Add code to allow building a W32 DLL.
+ * src/Makefile.am: Changed to allow building for W32.
+ * src/versioninfo.rc.in: New.
+ * src/gpg-error.def: New.
+
+2005-06-20 Marcus Brinkmann <marcus@g10code.de>
+
+ Released 1.1.
+
+ * configure.ac: Bump up LIBGPG_ERROR_LT_REVISION, update version
+ field.
+
+2005-06-16 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/mkerrcodes.awk: Fix comment. Allow any non-empty line to
+ start the processing, not only lines starting with numbers.
+ Reported by Guillaume Libersat <glibersat@hurdfr.org>.
+
+2005-01-05 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac: Check for locale.h.
+
+2005-04-20 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in: Add GPG_ERR_LOCKED.
+
+2005-04-18 Werner Koch <wk@g10code.com>
+
+ * src/err-codes.h.in: Add GPG_ERR_UNKNOWN_EXTN and
+ GPG_ERR_UNKNOWN_CRIT_EXTN.
+
+2004-12-18 Werner Koch <wk@g10code.com>
+
+ * autogen.sh: Add option --build-w32.
+
+2004-09-14 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.m4: Add copyright note.
+
+ * configure.ac: Call AC_CANONICAL_HOST. Suppress warning about
+ lack of strerror_r on all Solaris platforms.
+
+2004-07-30 Werner Koch <wk@g10code.de>
+
+ Released 1.0.
+
+ * configure.ac: Bumbed version to 1.0, LT to C1/A1/R3.
+
+2004-07-15 Werner Koch <wk@gnupg.org>
+
+ * src/err-codes.h.in: Renamed description for CARD_RESET.
+
+2004-06-28 Werner Koch <wk@gnupg.org>
+
+ * src/err-codes.h.in: Add GPG_ERR_INV_REQUEST.
+
+2004-06-08 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/Makefile.am (mkerrcodes): Prefix mkerrcodes.c with $(srcdir)
+ to fix VPATH build.
+
+2004-05-25 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/err-codes.h.in: Add GPG_ERR_PROTOCOL_VIOLATION and
+ GPG_ERR_INV_MAC.
+
+2004-04-23 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/Makefile.am (mkerrcodes): Do not use $< in non-inference rule.
+ (code-from-errno.h): Likewise.
+
+2004-04-22 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/Makefile.am (gpg_error_CPPFLAGS): New variable.
+ (localedir): Likewise.
+ * gpg-error.c: Include the gettext headers.
+ (init_i18n): New function.
+ (main): Call init_i18n, gettextize messages.
+
+2004-04-02 Thomas Schwinge <schwinge@nic-nac-project.de>
+
+ * autogen.sh: Added ACLOCAL_FLAGS.
+
+2004-04-19 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.m4: Quote first argument to AC_DEFUN.
+
+ * src/mkerrcodes.awk: Allow whitespace before expanded
+ preprocessor macro (ie, the error code value). Needed for Solaris 2.8.
+
+2004-04-08 Moritz Schulte <moritz@g10code.de>
+
+ * src/gpg-error.c (main): Return zero on success.
+
+2004-03-09 Marcus Brinkmann <marcus@g10code.de>
+
+ * libgpg-error.spec.in (%files): Add gpg-error. Submitted by
+ Albrecht Dreß <albrecht.dress@arcor.de>.
+
+ * src/mkerrcodes.c (main): Fix type of argv. Return something.
+
+2004-03-09 Werner Koch <wk@gnupg.org>
+
+ * Makefile.am (dist-hook): Create a VERSION file for use by mkdiff.
+
+ * src/Makefile.am (mkerrcodes.h): Let CPP work on a temporary file.
+ (CLEANFILES): Add that temporary file.
+ * configure.ac (AC_PROG_CPP): Added.
+
+ * src/err-codes.h.in: Removed trailing spaces from
+ GPG_ERR_NOT_LOCKED.
+
+2004-03-08 Werner Koch <wk@gnupg.org>
+
+ * src/err-sources.h.in: Added GPG_ERR_SOURCE_GSTI.
+
+2004-03-07 Marcus Brinkmann <marcus@g10code.de>
+
+ Released 0.7.
+
+ * configure.ac: Bumbed up LIBGPG_ERROR_LT_REVISON.
+
+ * src/gpg-error-config.in: Fix last change.
+ * src/gpg-error-config.in (Options): Do not emit include and lib
+ directory for prefix "/usr" or "".
+
+ * tests/Makefile.am (INCLUDES): Change to -I$(top_srcdir)/src to
+ -I$(top_builddir).
+
+2004-03-01 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac: Define CC_FOR_BUILD.
+ * src/Makefile.am (BUILT_SOURCES): Add gpg-error.h.
+ (EXTRA_DIST): Add mkerrcodes.awk and mkerrcodes.c.
+ (CLEANFILES): Add mkerrcodes.h and mkerrcodes.
+ (mkerrcodes.h): New target.
+ (mkerrcodes): New target.
+ (code-from-errno.h): Rewritten.
+
+ * src/errnos.in: Remove include statement (which was ignored
+ anyway).
+ * src/mkerrcodes.awk: New file.
+ * src/mkerrcodes.c: New file.
+
+2004-02-27 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/Makefile.am (noinst_PROGRAMS): Rename to ...
+ (bin_PROGRAMS): ... this.
+
+ * src/gpg-error.h.in: Add extern "C" closure for C-- compilers.
+
+ * src/Makefile.am (noinst_PROGRAMS): New variable.
+ (gpg_error_LDADD): New variable.
+ (gpg_error_SOURCES): New variable.
+ (EXTRA_DIST): Add mkheader.awk and gpg-error.h.in.
+ (BUILT_SOURCES): Add err-sources-sym.h, err-codes-sym.h and
+ errnos-sym.h.
+ (CLEANFILES): Add err-sources-sym.h, err-codes-sym.h,
+ errnos-sym.h and gpg-error.h.
+ (err-codes.h, err-sources.h): Add -v textidx=3 to mkstrtable.awk
+ invocation.
+ (err-codes-sym.h): New target.
+ (err-sources-sym.h): New target.
+ (gpg-error.h): New rule.
+ * src/mkstrtable.awk: Skip the second field (which contains the
+ error code symbol).
+ (FS): Allow more than one tab as field separator.
+ Allow to specify the field to be used as text with the variable
+ textidx.
+ Allow to suppress gettext markers in the output.
+ Allow to specify a prefix to the messages.
+ Allow to specify a namespace for the variable and macro names.
+ * src/mkerrnos.awk (FS): Initialize. Understand variable
+ errnoidx, which defaults to 2, to cope with the error names being
+ in a different column than the first.
+ * src/mkerrcodes1.awk: Likewise. Use \t as separator.
+ * src/mkheader.awk: New file.
+ * src/errnos.in: Add error code numbers (relativ to
+ GPG_ERR_SYSTEM_ERROR).
+ * src/strerror-sym.c: New file.
+ * src/strsources-sym.c: New file.
+ * src/err-codes.h.in: Add the error code symbol for every error
+ code.
+ (GPG_ERR_BUFFER_TOO_SHORT): Fix error code (it is 200, not 199).
+ * src/err-sources.h.in: Likewise.
+ * src/gpg-error.h.in: New file.
+ * src/gpg-error.h: File removed.
+ * src/gpg-error.c: New file.
+
+2004-02-18 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error-config.in: Ignore setting of --prefix.
+
+2004-02-11 Werner Koch <wk@gnupg.org>
+
+ * autogen.sh (check_version): Removed bashism and simplified.
+
+2004-02-03 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h: Added GPG_ERR_NOT_LOCKED.
+
+2003-12-22 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h: Added GPG_ERR_LOCALE_PROBLEM.
+
+2003-12-12 Werner Koch <wk@gnupg.org>
+
+ * src/err-codes.h.in: s/revoced/revoked/.
+
+2003-12-08 Werner Koch <wk@gnupg.org>
+
+ * README.CVS: Enhanced.
+
+ * autogen.sh: New.
+ * Makefile.am (EXTRA_DIST): Added autogen.sh.
+
+2003-11-14 Werner Koch <wk@gnupg.org>
+
+ * configure.ac: Bumbed version number to 0.7.
+
+ Released 0.6.
+
+ * configure.ac: Bumbed up LIBGPG_ERROR_LT_REVISON.
+
+2003-11-13 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h, src/err-codes.h.in: Removed: GPG_ERR_IO_ERROR,
+ GPG_ERR_FILE_ERROR, GPG_ERR_READ_ERROR, GPG_ERR_WRITE_ERROR,
+ GPG_ERR_LOCK_ERROR.
+
+ * src/gpg-error.h (GPG_ERR_SOURCE_DIRMNGR): Fixed typo.
+
+2003-11-12 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h, src/err-codes.h.in: Added these codes:
+ GPG_ERR_INV_ATTR, GPG_ERR_NO_VALUE, GPG_ERR_NOT_FOUND,
+ GPG_ERR_VALUE_NOT_FOUND, GPG_ERR_SYNTAX, GPG_ERR_INV_CRL,
+ GPG_ERR_BAD_BER, GPG_ERR_INV_BER, GPG_ERR_ELEMENT_NOT_FOUND,
+ GPG_ERR_IDENTIFIER_NOT_FOUND, GPG_ERR_INV_TAG, GPG_ERR_INV_LENGTH,
+ GPG_ERR_INV_KEYINFO, GPG_ERR_UNEXPECTED_TAG, GPG_ERR_NOT_DER_ENCODED,
+ GPG_ERR_NO_CMS_OBJ, GPG_ERR_INV_CMS_OBJ, GPG_ERR_UNKNOWN_CMS_OBJ,
+ GPG_ERR_UNSUPPORTED_CMS_OBJ, GPG_ERR_UNSUPPORTED_ENCODING,
+ GPG_ERR_UNSUPPORTED_CMS_VERSION, GPG_ERR_UNKNOWN_ALGORITHM,
+ GPG_ERR_ENCODING_PROBLEM, GPG_ERR_INV_STATE, GPG_ERR_DUP_VALUE,
+ GPG_ERR_MISSING_ACTION, GPG_ERR_MODULE_NOT_FOUND,
+ GPG_ERR_INV_OID_STRING, GPG_ERR_INV_TIME, GPG_ERR_INV_CRL_OBJ,
+ GPG_ERR_UNSUPPORTED_CRL_VERSION, GPG_ERR_INV_CERT_OBJ,
+ GPG_ERR_UNKNOWN_NAME, GPG_ERR_IO_ERROR, GPG_ERR_FILE_ERROR,
+ GPG_ERR_READ_ERROR, GPG_ERR_WRITE_ERROR, GPG_ERR_LOCK_ERROR,
+ GPG_ERR_BUFFER_TOO_SHORT.
+
+2003-11-06 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h, src/err-sources.h.in: Added error sources for
+ Libksba and Dirmngr. Added GPG_ERR_TRUNCATED.
+
+2003-11-03 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h: Allow GPG_ERR_INLINE to get overriden, so that
+ one can use the -D flag to specify the inline keyword. Suggested
+ by Philip Brown.
+
+2003-10-28 Moritz Schulte <mo@g10code.com>
+
+ * src/gpg-error.h (gpg_err_code_t): Added:
+ GPG_ERR_NO_ENCODING_METHOD, GPG_ERR_NO_ENCRYPTION_SCHEME,
+ GPG_ERR_NO_SIGNATURE_SCHEME.
+ * src/err-codes.h.in: Likewise.
+
+2003-10-25 Werner Koch <wk@gnupg.org>
+
+ * src/strerror.c: Include stdio.h for snprintf
+ prototype. Suggested by papadopo@shfj.cea.fr, fixes #gnupg/214.
+
+2003-10-11 Moritz Schulte <mo@g10code.com>
+
+ * src/gpg-error.m4: Do not ask gpg-error-config to change the
+ prefix, if --with-gpg-error-prefix=... is used.
+
+2003-10-06 Marcus Brinkmann <marcus@g10code.de>
+
+ Released 0.5.
+
+ * configure.ac (LIBGPG_ERROR_LT_CURRENT, LIBGPG_ERROR_LT_AGE):
+ Bump up by one.
+
+2003-09-30 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.h: Include <stddef.h>.
+ (gpg_strerror_r): Change prototype to match POSIX. Rewritten for
+ that prototype.
+ * src/strerror.c: Include <errno.h>.
+ (gpg_strerror_r, system_strerror_r): Change prototype to match
+ POSIX. Rewritten for that prototype. Rewritten for that
+ prototype.
+
+2003-09-30 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h: Add PIN_NOT_SYNCED.
+
+2003-09-13 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac: Invoke AC_FUNC_STRERROR_R.
+ * src/gpg-error.h (gpg_strerror_r): New prototype.
+ * src/strerror.c (system_strerror_r): New function.
+ (gpg_strerror_r): New function.
+
+2003-09-04 Marcus Brinkmann <marcus@g10code.de>
+
+ * libgpg-error.spec.in: New file.
+ * Makefile.am (EXTRA_DIST): Add libgpg-error.spec.in.
+ * AUTHORS (Maintainer): Add Robert Schiele as contributor.
+
+2003-09-03 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error-config.in: Rewritten.
+
+2003-09-03 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac (AC_INIT): Bump up version number.
+
+2003-09-03 Marcus Brinkmann <marcus@g10code.de>
+
+ Released 0.4.
+
+ * src/gpg-error.h: Define GPG_ERR_INLINE to nothing if the
+ compiler does not implement C99.
+ * configure.ac: (AC_INIT): Bump up version number.
+
+2003-09-02 Moritz Schulte <mo@g10code.com>
+
+ * src/gpg-error.h (gpg_err_code_t): Added: GPG_ERR_NO_PRIME.
+ * src/err-codes.h.in: Likewise.
+
+2003-08-19 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.h (GPG_ERR_SYSTEM_ERROR): Fix value (should have
+ been 2^15, was 2^14).
+ (GPG_ERR_CODE_DIM): Fix value (should have been 65536, was 32768).
+ Change the error codes of all system errors to have the
+ GPG_ERR_SYSTEM_ERROR bit set.
+
+2003-08-06 Marcus Brinkmann <marcus@g10code.de>
+
+ * code-from-errno.c, code-to-errno.c, err-codes.h.in,
+ err-sources.h.in, errnos.in, gpg-error.h, strerror.c, strsource.c:
+ Fix typo in copyright notice.
+
+2003-07-31 Marcus Brinkmann <marcus@g10code.de>
+
+ * README: Clarify copyright conditions.
+ * src/mkstrtable.awk: Don't claim in the copyright information
+ that this program is part of libgpg-error.
+ * src/mkerrnos.awk: Likewise.
+ * src/mkerrcodes1.awk: Likewise.
+ * src/mkerrcodes2.awk: Likewise.
+
+2003-07-31 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/strerror.c (gpg_strerror): Use CODE, not ERR to map error
+ code to errno.
+
+ * configure.ac (AC_INIT): Bump version to 0.3.
+
+ Released 0.3.
+
+2003-07-30 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac (AC_INIT): Bump version to 0.2.
+
+ Released 0.2.
+
+2003-07-17 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h: Add HARDWARE, PIN_BLOCKED and USE_CONDITIONS.
+
+2003-07-16 Moritz Schulte <moritz@g10code.com>
+
+ * src/gpg-error.h (gpg_err_code): Cast return value to
+ gpg_err_code_t. Thanks to Ralf Schneider
+ <ralf@tapfere-schneiderleins.de>.
+ (gpg_err_source): Cast return value to gpg_err_source_t. Thanks
+ to Ralf Schneider <ralf@tapfere-schneiderleins.de>.
+
+2003-07-15 Moritz Schulte <moritz@g10code.com>
+
+ * src/gpg-error.m4 (AM_PATH_GPG_ERROR): Use `0.0' instead of
+ `0.0.0' in case no version number is given, since the following
+ sed commands expect the former form, not a triplet.
+
+2003-07-06 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.h (GPG_ERR_INLINE): Define macro. Use it instead
+ of __inline__ in this file.
+
+2003-06-30 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h: Add WRONG_CARD.
+
+2003-06-22 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.h: Fix value of GPG_ERR_CANCELED.
+
+2003-06-06 Marcus Brinkmann <marcus@g10code.de>
+
+ * configure.ac: Define GPG_ERROR_CONFIG_LIBS and
+ GPG_ERROR_CONFIG_CFLAGS.
+ Add src/gpg-error-config to config files.
+ * src/Makefile.am (EXTRA_DIST): Add gpg-error-config.in and
+ gpg-error.m4.
+ (bin_SCRIPTS): New variable.
+ (m4datadir, m4data_DATA): New variables.
+ * src/gpg-error-config.in: New file.
+ * src/gpg-error.m4: New file.
+
+ Released 0.1.
+
+2003-06-05 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.h (gpg_err_make_from_errno): Fix implementation.
+
+ * src/gpg-error.h (gpg_err_code_t): Add GPG_ERR_SIG_EXPIRED.
+ (err-codes.h.in): Likewise.
+
+ * src/gpg-error.h (gpg_error_from_errno): Change return type to
+ gpg_error_t.
+
+2003-06-04 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.h (gpg_err_code_t): Add GPG_ERR_INV_ENGINE,
+ GPG_ERR_PUBKEY_NOT_TRUSTED, GPG_ERR_DECRYPT_FAILED,
+ GPG_ERR_KEY_EXPIRED.
+ (gpg_make_error): Rename to gpg_err_make.
+ (gpg_error): Use here.
+ * tests/t-strerror.c (main): And here.
+ (gpg_make_error_from_errno): Rename to gpg_err_make_from_errno.
+
+ * src/gpg-error.h (gpg_make_error_from_errno): New inline function.
+ (gpg_error_from_errno): Likewise.
+
+ * src/code-from-errno.c (gpg_err_code_from_errno): Handle the case
+ of no error at all.
+
+2003-06-04 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg-error.h (gpg_err_source_t): Add GPG_ERR_SOURCE_USER_1 to
+ GPG_ERR_SOURCE_USER_4.
+ (gpg_err_code_t): Add GPG_ERR_USER_1 to GPG_ERR_USER_16.
+ * src/err-sources.h.in: Likewise.
+ * src/err-codes.h.in: Likewise.
+
+ * src/gpg-error.h: Rename GPG_ERR_INVALID_RESPONSE to
+ GPG_ERR_INV_RESPONSE, GPG_ERR_INVALID_CARD to GPG_ERR_INV_CARD,
+ GPG_ERR_INVALID_INDEX to GPG_ERR_INV_INDEX, GPG_ERR_INVALID_ID to
+ GPG_ERR_INV_ID, GPG_ERR_AGENT_ERROR to GPG_ERR_AGENT,
+ GPG_ERR_ASSUAN_ERROR to GPG_ERR_ASSUAN, GPG_ERR_PIN_ENTRY_ERROR to
+ GPG_ERR_PIN_ENTRY, GPG_ERR_DIRMNGR_ERROR to GPG_ERR_DIRMNGR,
+ GPG_ERR_CARD_ERROR to GPG_ERR_CARD, GPG_ERR_CONFIGURATION_ERROR to
+ GPG_ERR_CONFIGURATION, GPG_ERR_SCDAEMON_ERROR to GPG_ERR_SCDAEMON.
+
+2003-06-03 Werner Koch <wk@gnupg.org>
+
+ * src/gpg-error.h, src/err-codes.h.in: Add codes for TIMEOUT,
+ INV_HANDLE, NOTHING_FOUND, WRONG_BLOB_TYPE and MISSING_VALUE.
+ * src/gpg-error.h, src/err-sources.h.in: Add KEYBOX which is the
+ keybox subsystem of GnuPG.
+
+2003-06-02 Moritz Schulte <moritz@g10code.com>
+
+ * src/gpg-error.h: Fix description of gpg_err_code_to_errno
+ (i.e. substitute `ERR' with `CODE').
+ * src/code-to-errno.c: Likewise.
+
+ * tests/t-strerror.c: Include <gpg-error.h> instead of
+ <gpg/error.h>.
+
+2003-06-01 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/strerror.c: Include <string.h>.
+
+ * src/gpg-error.h (gpg_err_code_t): Remove GPG_ERR_FILE_READ,
+ GPG_ERR_FILE_WRITE, GPG_ERR_FILE_OPEN, GPG_ERR_FILE_CREATE,
+ GPG_ERR_FILE_CLOSE, GPG_ERR_FILE_DELETE, GPG_ERR_FILE_EXISTS,
+ GPG_ERR_FILE, GPG_ERR_IO, GPG_ERR_OUT_OF_CORE, GPG_ERR_READ_ERROR,
+ GPG_ERR_WRITE_ERROR.
+ * src/err-codes.h.in: Likewise.
+
+ * src/Makefile.am (EXTRA_DIST): Add err-sources.h and err-codes.h.
+
+ * src/mkerrcodes1.awk: New file.
+ * src/mkerrcodes2.awk: New file.
+ * src/mkerrnos.awk: New file.
+ * src/errnos.in: New file.
+ * src/code-from-errno.c: New file.
+ * src/code-to-errno.c: New file.
+ * src/Makefile.am (libgpg_error_la_SOURCES): Remove err-sources.h
+ and err-codes.h. Add code-to-errno.c and code-from-errno.c.
+ (code-to-errno.h): New target.
+ (code-from-errno.h): Likewise.
+ (EXTRA_DIST): Add mkerrnos.awk, errnos.in, and mkerrcodes1.awk.
+ (BUILT_SOURCES): Add code-to-errno.h and code-from-errno.h.
+ (CLEANFILES): Likewise.
+ * src/strerror.c (gpg_strerror): Use strerror for system errors.
+ * src/err-codes.h.in: Add 16382 (Unknown system error).
+ * src/gpg-error.h (gpg_err_code_t): Add system errors.
+ (GPG_ERR_CODE_DIM): Change to 32768.
+ (GPG_ERR_SYSTEM_ERROR): New macro.
+ (gpg_err_code_from_errno): New prototype.
+ (gpg_err_code_to_errno): Likewise.
+
+ * src/Makefile.am (nobase_include_HEADERS): Rename target to ...
+ (include_HEADERS): ... this. Change file to gpg-error.h
+ (libgpg_error_la_SOURCES): Change gpg/error.h to gpg-error.h.
+ * src/gpg/error.h: Move to ...
+ * src/gpg-error.h: ... here. New file.
+ * src/strerror.c: Include <gpg-error.h>, not <gpg/error.h>.
+ * src/strsource.c: Likewise.
+
+ * src/gpg/error.h (gpg_error_t): Change type to unsigned int, not
+ long.
+
+2003-05-26 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/gpg/error.h (gpg_make_error): Only OR in the error source if
+ there is an error, this allows to test for success with "if (!err)"
+ and similar tests.
+
+2003-05-15 Marcus Brinkmann <marcus@g10code.de>
+
+ * src/mkstrtable.awk: Add exception clause to license about the
+ output of the script.
+ * configure.ac: Change license to LGPL 2.1 or later.
+ * Makefile.am: Likewise.
+ * src/Makefile.am: Likewise.
+ * src/err-codes.h.in: Likewise.
+ * src/err-sources.h.in: Likewise.
+ * src/strsource.c: Likewise.
+ * src/strerror.c: Likewise.
+ * src/gpg/error.h: Likewise.
+ * tests/Makefile.am: Likewise.
+
+ * src/mkstrtable.awk: New variable HEADER. Copy input until first
+ line with an actual code and description occurs.
+ * src/err-codes.h.in: Uncomment license, so it is copied into the
+ output.
+ * src/err-sources.h.in: Likewise.
+
+2003-05-15 Marcus Brinkmann <marcus@g10code.de>
+
+ * COPYING.LIB: New file.
+
+2003-05-15 Marcus Brinkmann <marcus@g10code.de>
+
+ * Initial check-in.
+
+ Copyright 2003, 2004, 2005, 2006, 2007, 2010 g10 Code GmbH
+
+ This file is free software; as a special exception the author gives
+ unlimited permission to copy and/or distribute it, with or without
+ modifications, as long as this notice is preserved.
+
+ This file is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+ implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/libgpg-error-1.10/INSTALL b/libgpg-error-1.10/INSTALL
new file mode 100644
index 0000000..23e5f25
--- /dev/null
+++ b/libgpg-error-1.10/INSTALL
@@ -0,0 +1,236 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script). Here is a another example:
+
+ /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+ Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
diff --git a/libgpg-error-1.10/Makefile.am b/libgpg-error-1.10/Makefile.am
new file mode 100644
index 0000000..d0d3000
--- /dev/null
+++ b/libgpg-error-1.10/Makefile.am
@@ -0,0 +1,54 @@
+# Makefile.am for libgpg-error.
+# Copyright (C) 2003, 2006, 2007 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = dist-bzip2
+
+EXTRA_DIST = autogen.sh config.rpath libgpg-error.spec.in COPYING COPYING.LIB \
+ potomo
+
+if LANGUAGES_SOME
+lang_subdirs = lang
+else
+lang_subdirs =
+endif
+
+SUBDIRS = m4 src tests po $(lang_subdirs)
+
+
+dist-hook:
+ sed -e 's/@pkg_version@/$(VERSION)/g' \
+ $(top_srcdir)/libgpg-error.spec.in > $(distdir)/libgpg-error.spec
+ @set -e; echo "$(VERSION)" > $(distdir)/VERSION
+
+if HAVE_W32_SYSTEM
+install-data-hook:
+ set -e; \
+ for i in $$($(top_srcdir)/potomo --get-linguas $(top_srcdir)/po); do \
+ $(MKDIR_P) "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES" || true; \
+ rm -f "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/libgpg-error.mo" \
+ 2>/dev/null || true; \
+ $(top_srcdir)/potomo $(top_srcdir)/po/$$i.po \
+ "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/libgpg-error.mo" ; \
+ done
+endif
+
+stowinstall:
+ $(MAKE) $(AM_MAKEFLAGS) install prefix=/usr/local/stow/libgpg-error
+
diff --git a/libgpg-error-1.10/Makefile.in b/libgpg-error-1.10/Makefile.in
new file mode 100644
index 0000000..f3b15cf
--- /dev/null
+++ b/libgpg-error-1.10/Makefile.in
@@ -0,0 +1,725 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am for libgpg-error.
+# Copyright (C) 2003, 2006, 2007 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING COPYING.LIB \
+ ChangeLog INSTALL NEWS THANKS compile config.guess \
+ config.rpath config.sub depcomp install-sh ltmain.sh missing \
+ mkinstalldirs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
+ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
+ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = m4 src tests po lang
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_FILEVERSION = @BUILD_FILEVERSION@
+BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GPG_ERROR_CONFIG_CFLAGS = @GPG_ERROR_CONFIG_CFLAGS@
+GPG_ERROR_CONFIG_ISUBDIRAFTER = @GPG_ERROR_CONFIG_ISUBDIRAFTER@
+GPG_ERROR_CONFIG_LIBS = @GPG_ERROR_CONFIG_LIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBGPG_ERROR_LT_AGE = @LIBGPG_ERROR_LT_AGE@
+LIBGPG_ERROR_LT_CURRENT = @LIBGPG_ERROR_LT_CURRENT@
+LIBGPG_ERROR_LT_REVISION = @LIBGPG_ERROR_LT_REVISION@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+ACLOCAL_AMFLAGS = -I m4
+AUTOMAKE_OPTIONS = dist-bzip2
+EXTRA_DIST = autogen.sh config.rpath libgpg-error.spec.in COPYING COPYING.LIB \
+ potomo
+
+@LANGUAGES_SOME_FALSE@lang_subdirs =
+@LANGUAGES_SOME_TRUE@lang_subdirs = lang
+SUBDIRS = m4 src tests po $(lang_subdirs)
+all: config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+ cd $(srcdir) && $(AUTOMAKE) --gnu \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+ @if test ! -f $@; then \
+ rm -f stamp-h1; \
+ $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+ else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_srcdir) && $(AUTOHEADER)
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d $(distdir) || mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-lzma: distdir
+ tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lzma*) \
+ unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+@HAVE_W32_SYSTEM_FALSE@install-data-hook:
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-data-am install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am am--refresh check check-am clean clean-generic \
+ clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+ dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-zip \
+ distcheck distclean distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am \
+ install-data-hook install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am
+
+
+dist-hook:
+ sed -e 's/@pkg_version@/$(VERSION)/g' \
+ $(top_srcdir)/libgpg-error.spec.in > $(distdir)/libgpg-error.spec
+ @set -e; echo "$(VERSION)" > $(distdir)/VERSION
+
+@HAVE_W32_SYSTEM_TRUE@install-data-hook:
+@HAVE_W32_SYSTEM_TRUE@ set -e; \
+@HAVE_W32_SYSTEM_TRUE@ for i in $$($(top_srcdir)/potomo --get-linguas $(top_srcdir)/po); do \
+@HAVE_W32_SYSTEM_TRUE@ $(MKDIR_P) "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES" || true; \
+@HAVE_W32_SYSTEM_TRUE@ rm -f "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/libgpg-error.mo" \
+@HAVE_W32_SYSTEM_TRUE@ 2>/dev/null || true; \
+@HAVE_W32_SYSTEM_TRUE@ $(top_srcdir)/potomo $(top_srcdir)/po/$$i.po \
+@HAVE_W32_SYSTEM_TRUE@ "$(DESTDIR)$(localedir)/$$i/LC_MESSAGES/libgpg-error.mo" ; \
+@HAVE_W32_SYSTEM_TRUE@ done
+
+stowinstall:
+ $(MAKE) $(AM_MAKEFLAGS) install prefix=/usr/local/stow/libgpg-error
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libgpg-error-1.10/NEWS b/libgpg-error-1.10/NEWS
new file mode 100644
index 0000000..dd010a3
--- /dev/null
+++ b/libgpg-error-1.10/NEWS
@@ -0,0 +1,317 @@
+Noteworthy changes in version 1.10 (2010-10-26)
+----------------------------------------------
+
+ * Using a static library on W32 does now work.
+
+ * Interface changes relative to the 1.9 release:
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ GPG_ERR_NOT_INITIALIZED NEW.
+ GPG_ERR_MISSING_ISSUER_CERT NEW.
+ GPG_ERR_FULLY_CANCELED NEW.
+
+
+Noteworthy changes in version 1.9 (2010-07-21)
+----------------------------------------------
+
+ * New function gpg_err_deinit.
+
+ * Fix building of static lib under W32.
+
+ * Interface changes relative to the 1.8 release:
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ GPG_ERR_MISSING_KEY NEW.
+ GPG_ERR_TOO_MANY NEW.
+ GPG_ERR_LIMIT_REACHED NEW.
+ gpg_err_deinit NEW.
+
+
+Noteworthy changes in version 1.8 (2010-05-06)
+----------------------------------------------
+
+ * Support for WindowsCE.
+
+ * New option --list for gpg-error.
+
+ * Interface changes relative to the 1.7 release:
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ GPG_ERR_NOT_ENABLED NEW.
+ GPG_ERR_SOURCE_G13 NEW.
+ GPG_ERR_NO_ENGINE NEW.
+ gpg_err_set_errno NEW.
+
+
+Noteworthy changes in version 1.7 (2008-11-26)
+----------------------------------------------
+
+ * Minor fixes and a few new error codes.
+
+ * Interface changes relative to the 1.6 release:
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ GPG_ERR_NOT_OPERATIONAL NEW
+ GPG_ERR_NO_PASSPHRASE NEW
+ GPG_ERR_NO_PIN NEW
+
+
+Noteworthy changes in version 1.6 (2007-10-29)
+----------------------------------------------
+
+ * Fixed a build problem under Windows.
+
+ * Interface changes relative to the 1.4 release:
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ GPG_ERR_UNFINISHED NEW
+ GPG_ERR_SOURCE_GPA NEW
+ GPG_ERR_SOURCE_KLEO NEW
+
+
+Noteworthy changes in version 1.5 (2006-11-30)
+----------------------------------------------
+
+ * Minor build system fixes.
+
+ * Updated gettext. Removed included gettext copy.
+
+ * gpg-error has a new option --version.
+
+
+Noteworthy changes in version 1.4 (2006-09-14)
+----------------------------------------------
+
+ * Support for Common Lisp is included.
+
+ * New error codes for the Assuan IPC library.
+
+ * New error code GPG_ERR_MISSING_ERRNO to be used in cases when a
+ system accidently does not set errno but a system error definitely
+ occured.
+
+ * New error source GPG_ERR_SOURCE_ANY to allow proper use of
+ libgpg-error even if a specific source is not available.
+
+ * New convenience functions gpg_err_code_from_syserror and
+ gpg_error_from_syserror which make sure never to return 0.
+
+ * Interface changes relative to the 1.2 release:
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ gpg_err_code_from_syserror NEW
+ gpg_error_from_syserror NEW
+ GPG_ERR_SOURCE_ANY NEW
+ GPG_ERR_MISSING_ERRNO NEW
+ GPG_ERR_UNKNOWN_OPTION NEW
+ GPG_ERR_UNKNOWN_COMMAND NEW
+ GPG_ERR_ASS_GENERAL NEW
+ GPG_ERR_ASS_ACCEPT_FAILED NEW
+ GPG_ERR_ASS_CONNECT_FAILED NEW
+ GPG_ERR_ASS_INV_RESPONSE NEW
+ GPG_ERR_ASS_INV_VALUE NEW
+ GPG_ERR_ASS_INCOMPLETE_LINE NEW
+ GPG_ERR_ASS_LINE_TOO_LONG NEW
+ GPG_ERR_ASS_NESTED_COMMANDS NEW
+ GPG_ERR_ASS_NO_DATA_CB NEW
+ GPG_ERR_ASS_NO_INQUIRE_CB NEW
+ GPG_ERR_ASS_NOT_A_SERVER NEW
+ GPG_ERR_ASS_NOT_A_CLIENT NEW
+ GPG_ERR_ASS_SERVER_START NEW
+ GPG_ERR_ASS_READ_ERROR NEW
+ GPG_ERR_ASS_WRITE_ERROR NEW
+ GPG_ERR_ASS_TOO_MUCH_DATA NEW
+ GPG_ERR_ASS_UNEXPECTED_CMD NEW
+ GPG_ERR_ASS_UNKNOWN_CMD NEW
+ GPG_ERR_ASS_SYNTAX NEW
+ GPG_ERR_ASS_CANCELED NEW
+ GPG_ERR_ASS_NO_INPUT NEW
+ GPG_ERR_ASS_NO_OUTPUT NEW
+ GPG_ERR_ASS_PARAMETER NEW
+ GPG_ERR_ASS_UNKNOWN_INQUIRE NEW
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+
+Noteworthy changes in version 1.3 (2006-03-14)
+----------------------------------------------
+
+ * GNU gettext is included for systems that do not provide it.
+
+
+Noteworthy changes in version 1.2 (2006-03-03)
+----------------------------------------------
+
+ * New function gpg_err_init, which binds the locale directory to
+ the text domain. This function is a constructor on GCC targets,
+ so it does not need to be called explicitely. The header file
+ defines GPG_ERR_INITIALIZED in this case. This is experimental for
+ now.
+
+ * "./autogen.sh --build-w32" does now also build a DLL for W32.
+ Translations are not yet provided for this platform.
+
+ * New error codes GPG_ERR_UNKNOWN_EXTN and GPG_ERR_UNKNOWN_CRIT_EXTN.
+
+ * New error code GPG_ERR_LOCKED.
+
+ * New translations included for France, Romania, and Vietnamese.
+
+ * Interface changes relative to the 1.1 release:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+GPG_ERR_UNKNOWN_EXTN NEW
+GPG_ERR_UNKNOWN_CRIT_EXTN NEW
+GPG_ERR_LOCKED NEW
+gpg_err_init NEW
+GPG_ERR_INITIALIZED NEW
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+
+Noteworthy changes in version 1.1 (2005-06-20)
+----------------------------------------------
+
+ * Bug fixes.
+
+
+Noteworthy changes in version 1.0 (2004-07-30)
+----------------------------------------------
+
+ * Ported to Solaris 2.8.
+
+ * Added a new error source GPG_ERR_SOURCE_GSTI, and new error
+ codes GPG_ERR_PROTOCOL_VIOLATION and GPG_ERR_INV_MAC for this
+ source.
+
+ * Interface changes relative to the 0.7 release:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+GPG_ERR_SOURCE_GSTI NEW
+GPG_ERR_PROTOCOL_VIOLATION NEW
+GPG_ERR_INV_MAC NEW
+GPG_ERR_INV_REQUEST NEW
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Noteworthy changes in version 0.7 (2004-03-07)
+----------------------------------------------
+
+ * libgpg-error can be built on systems where the errno macros do not
+ evaluate to plain numbers, but expressions. If you want to
+ cross-compile, you might have to set CC_FOR_BUILD, though.
+
+ * A new tool gpg-error to convert error numbers into symbols into
+ strings is provided.
+
+ * Interface changes relative to the 0.6 release:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+GPG_ERR_LOCALE_PROBLEM NEW
+GPG_ERR_NOT_LOCKED NEW
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Noteworthy changes in version 0.6 (2003-11-14)
+----------------------------------------------
+
+ * German translation included.
+
+ * It is now possible to use the inline functions even for non C99
+ compliant compilers by given e.g. -DGPG_ERR_INLINE=inline when
+ compiling an application using this library. Note, that gcc will
+ use inline anyway.
+
+ * Interface changes relative to the 0.5 release:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+GPG_ERR_SOURCE_KSBA NEW
+GPG_ERR_SOURCE_DIRMNGR NEW
+GPG_ERR_TRUNCATED NEW
+GPG_ERR_NO_ENCODING_METHOD NEW
+GPG_ERR_NO_ENCRYPTION_SCHEME NEW
+GPG_ERR_NO_SIGNATURE_SCHEME NEW
+GPG_ERR_INV_ATTR NEW
+GPG_ERR_NO_VALUE NEW
+GPG_ERR_NOT_FOUND NEW
+GPG_ERR_VALUE_NOT_FOUND NEW
+GPG_ERR_SYNTAX NEW
+GPG_ERR_INV_CRL NEW
+GPG_ERR_BAD_BER NEW
+GPG_ERR_INV_BER NEW
+GPG_ERR_ELEMENT_NOT_FOUND NEW
+GPG_ERR_IDENTIFIER_NOT_FOUND NEW
+GPG_ERR_INV_TAG NEW
+GPG_ERR_INV_LENGTH NEW
+GPG_ERR_INV_KEYINFO NEW
+GPG_ERR_UNEXPECTED_TAG NEW
+GPG_ERR_NOT_DER_ENCODED, NEW
+GPG_ERR_NO_CMS_OBJ NEW
+GPG_ERR_INV_CMS_OBJ NEW
+GPG_ERR_UNKNOWN_CMS_OBJ, NEW
+GPG_ERR_UNSUPPORTED_CMS_OBJ NEW
+GPG_ERR_UNSUPPORTED_ENCODING, NEW
+GPG_ERR_UNSUPPORTED_CMS_VERSION NEW
+GPG_ERR_UNKNOWN_ALGORITHM NEW
+GPG_ERR_ENCODING_PROBLEM NEW
+GPG_ERR_INV_STATE NEW
+GPG_ERR_DUP_VALUE, NEW
+GPG_ERR_MISSING_ACTION NEW
+GPG_ERR_MODULE_NOT_FOUND NEW
+GPG_ERR_INV_OID_STRING NEW
+GPG_ERR_INV_TIME NEW
+GPG_ERR_INV_CRL_OBJ NEW
+GPG_ERR_UNSUPPORTED_CRL_VERSION NEW
+GPG_ERR_INV_CERT_OBJ NEW
+GPG_ERR_UNKNOWN_NAME NEW
+GPG_ERR_BUFFER_TOO_SHORT. NEW
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Noteworthy changes in version 0.5 (2003-10-06)
+----------------------------------------------
+
+ * New thread safe interface gpg_strerror_r.
+
+ * New error code GPG_ERR_PIN_NOT_SYNCED has been added.
+
+ * Interface changes relative to the 0.4 release:
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+gpg_strerror_r NEW
+GPG_ERR_PIN_NOT_SYNCED NEW
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+
+Noteworthy changes in version 0.4 (2003-09-03)
+----------------------------------------------
+
+ * Fixed another bug that prevented that system errors were created
+ correctly in the first place.
+
+ * Use inline in public header file only on C99 compilers.
+
+
+Noteworthy changes in version 0.3 (2003-07-31)
+----------------------------------------------
+
+ * Fixed bug that prevented that system errors were mapped to error
+ strings correctly.
+
+
+Noteworthy changes in version 0.2 (2003-07-30)
+----------------------------------------------
+
+ * Value of the error code GPG_ERR_CANCELED was fixed.
+
+ * New error codes GPG_ERR_WRONG_CARD, GPG_ERR_HARDWARE,
+ GPG_ERR_PIN_BLOCKED and GPG_ERR_USE_CONDITIONS have been added.
+
+ * The header file has been made C++ clean.
+
+ * AM_PATH_GPG_ERR has been fixed to work without explicit version
+ number.
+
+ * The header file now uses inline instead __inline__ for non-GNU
+ compilers.
+
+
+Noteworthy changes in version 0.1 (2003-06-06)
+----------------------------------------------
+
+ * Initial release.
+
+
+ Copyright 2003, 2004, 2005, 2010 g10 Code GmbH
+
+ This file is free software; as a special exception the author gives
+ unlimited permission to copy and/or distribute it, with or without
+ modifications, as long as this notice is preserved.
+
+ This file is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+ implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/libgpg-error-1.10/README b/libgpg-error-1.10/README
new file mode 100644
index 0000000..f66826e
--- /dev/null
+++ b/libgpg-error-1.10/README
@@ -0,0 +1,115 @@
+libgpg-error
+============
+
+This is a library that defines common error values for all GnuPG
+components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
+Libksba, DirMngr, Pinentry, SmartCard Daemon and more.
+
+libgpg-error is free software; you can redistribute it and/or modify
+it under the terms of the GNU Lesser General Public License as
+published by the Free Software Foundation; either version 2.1 of the
+License, or (at your option) any later version. See the file
+COPYING.LIB for copyright and warranty information.
+
+However, some files (for example src/mkerrnos.awk) used in the build
+process of the library are covered by a different license. Please see
+the header of these files and the file COPYING for copyright and
+warranty information on these files. A special exception in the
+copyright license of these files makes sure that the output in the
+build process, which is used in libgpg-error, is not affected by the
+GPL.
+
+
+Installation
+------------
+
+Please read the file INSTALL!
+
+Here is a quick summary:
+
+1) Check that you have unmodified sources. You can find instructions
+ how to verify the sources below. Don't skip this - it is an
+ important step!
+
+2) Unpack the archive. With GNU tar you can do it this way:
+ "tar xjvf libgpg-error-x.y.tar.bz2"
+
+3) "cd libgpg-error-x.y"
+
+4) "./configure"
+
+5) "make"
+
+6) "make install"
+
+
+How to Verify the Source
+------------------------
+
+In order to check that the version of libgpg-error which you are going
+to install is an original and unmodified copy of the original, you can
+do it in one of the following ways:
+
+a) If you already have a trusted version of GnuPG installed, you can
+ simply check the supplied signature:
+
+ $ gpg --verify libgpg-error-x.y.tar.bz2.sig
+
+ This checks that the detached signature libgpg-error-x.y.tar.bz2.sig
+ is indeed a a signature of libgpg-error-x.y.tar.bz2.
+
+ Please note that you have to use an old version of GnuPG to do all
+ this stuff. *Never* use the version which was built using the
+ library you are trying to verify!
+
+b) If you don't have any a trusted version of GnuPG, you can attempt
+ to verify the SHA1 checksum, using a trusted version of the sha1sum
+ program:
+
+ $ sha1sum libgpg-error-x.y.tar.bz2
+
+ This should yield an output _similar_ to this:
+
+ 610064e5b77700f5771c8fde2691c4365e1ca100 libgpg-error-x.y.tar.bz2
+
+ Now check that this checksum is _exactly_ the same as the one
+ published via the announcement list and probably via Usenet.
+
+
+Hints
+-----
+
+To build for Windows you you may use the convenience command:
+
+ ./autogen.sh --build-w32
+
+which runs configure with suitable options. For WindowsCE the command
+is:
+
+ ./autogen.sh --build-w32ce
+
+
+Known Problems
+--------------
+
+On Windows, WSA Error Codes can be provided as system error codes and
+will be transparently converted to the corresponding gpg error codes.
+There are two problems with this support:
+
+* Not all error codes corresponding to WSA Error codes have a detailed
+ description when printed with gpg_strerror. Some will default to
+ "Unknown error" for pretty printing. For example, WSAEHOSTDOWN will
+ be translated to GPG_ERR_EHOSTDOWN, but there is no corresponding
+ EHOSTDOWN in Windows and thus gpg_strerror will default to "Unknown
+ error" as printed by the system's strerror function for the argument
+ WSAEHOSTDOWN. (This could be fixed by adding our own error strings
+ replacing or extending the system error strings, including their
+ translations).
+
+* The translation to a gpg error code and back to a system error code
+ in some cases does not preserve information. For example, the error code
+ WSAEACCES translates to GPG_ERR_EACCES, which translates back to
+ EACCES.
+
+Any WSA Error code has either the first problem or the second (but not
+both), depending on if there is a corresponding Windows error code.
diff --git a/libgpg-error-1.10/THANKS b/libgpg-error-1.10/THANKS
new file mode 100644
index 0000000..9250249
--- /dev/null
+++ b/libgpg-error-1.10/THANKS
@@ -0,0 +1,16 @@
+
+Albrecht Dreß albrecht.dress at arcor de
+Guillaume Libersat glibersat at hurdfr org
+Jakub Bogusz qboosh at pld-linux org
+Petr Pisar petr.pisar at atlas cz
+
+
+ Copyright 2004, 2005 g10 Code GmbH
+
+ This file is free software; as a special exception the author gives
+ unlimited permission to copy and/or distribute it, with or without
+ modifications, as long as this notice is preserved.
+
+ This file is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+ implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/libgpg-error-1.10/VERSION b/libgpg-error-1.10/VERSION
new file mode 100644
index 0000000..c044b1a
--- /dev/null
+++ b/libgpg-error-1.10/VERSION
@@ -0,0 +1 @@
+1.10
diff --git a/libgpg-error-1.10/aclocal.m4 b/libgpg-error-1.10/aclocal.m4
new file mode 100644
index 0000000..506427d
--- /dev/null
+++ b/libgpg-error-1.10/aclocal.m4
@@ -0,0 +1,1007 @@
+# generated automatically by aclocal 1.10.2 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],,
+[m4_warning([this file was generated for autoconf 2.64.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# intlmacosx.m4 serial 1 (gettext-0.17)
+dnl Copyright (C) 2004-2007 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Checks for special options needed on MacOS X.
+dnl Defines INTL_MACOSX_LIBS.
+AC_DEFUN([gt_INTL_MACOSX],
+[
+ dnl Check for API introduced in MacOS X 10.2.
+ AC_CACHE_CHECK([for CFPreferencesCopyAppValue],
+ gt_cv_func_CFPreferencesCopyAppValue,
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ AC_TRY_LINK([#include <CoreFoundation/CFPreferences.h>],
+ [CFPreferencesCopyAppValue(NULL, NULL)],
+ [gt_cv_func_CFPreferencesCopyAppValue=yes],
+ [gt_cv_func_CFPreferencesCopyAppValue=no])
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+ AC_DEFINE([HAVE_CFPREFERENCESCOPYAPPVALUE], 1,
+ [Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in the CoreFoundation framework.])
+ fi
+ dnl Check for API introduced in MacOS X 10.3.
+ AC_CACHE_CHECK([for CFLocaleCopyCurrent], gt_cv_func_CFLocaleCopyCurrent,
+ [gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ AC_TRY_LINK([#include <CoreFoundation/CFLocale.h>], [CFLocaleCopyCurrent();],
+ [gt_cv_func_CFLocaleCopyCurrent=yes],
+ [gt_cv_func_CFLocaleCopyCurrent=no])
+ LIBS="$gt_save_LIBS"])
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ AC_DEFINE([HAVE_CFLOCALECOPYCURRENT], 1,
+ [Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the CoreFoundation framework.])
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+ AC_SUBST([INTL_MACOSX_LIBS])
+])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.10'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.10.2], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.10.2])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 9
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], UPC, [depcc="$UPC" am_compiler_list=],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 4
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[# Autoconf 2.62 quotes --file arguments for eval, but not when files
+# are listed without --file. Let's play safe and only enable the eval
+# if we detect the quoting.
+case $CONFIG_FILES in
+*\'*) eval set x "$CONFIG_FILES" ;;
+*) set x $CONFIG_FILES ;;
+esac
+shift
+for mf
+do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 13
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.60])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES(OBJC)],
+ [define([AC_PROG_OBJC],
+ defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+AC_DEFUN([AM_MAINTAINER_MODE],
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode is disabled by default
+ AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ USE_MAINTAINER_MODE=$enableval,
+ USE_MAINTAINER_MODE=no)
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST(MAINT)dnl
+]
+)
+
+AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 6
+
+# AM_PROG_CC_C_O
+# --------------
+# Like AC_PROG_CC_C_O, but changed for automake.
+AC_DEFUN([AM_PROG_CC_C_O],
+[AC_REQUIRE([AC_PROG_CC_C_O])dnl
+AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+dnl Make sure AC_PROG_CC is never called again, or it will override our
+dnl setting of CC.
+m4_define([AC_PROG_CC],
+ [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])])
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check for `mkdir -p'.
+AC_DEFUN([AM_PROG_MKDIR_P],
+[AC_PREREQ([2.60])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P,
+dnl while keeping a definition of mkdir_p for backward compatibility.
+dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile.
+dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of
+dnl Makefile.ins that do not define MKDIR_P, so we do our own
+dnl adjustment using top_builddir (which is defined more often than
+dnl MKDIR_P).
+AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl
+case $mkdir_p in
+ [[\\/$]]* | ?:[[\\/]]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([m4/autobuild.m4])
+m4_include([m4/gettext.m4])
+m4_include([m4/iconv.m4])
+m4_include([m4/lib-ld.m4])
+m4_include([m4/lib-link.m4])
+m4_include([m4/lib-prefix.m4])
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
+m4_include([m4/nls.m4])
+m4_include([m4/po.m4])
+m4_include([m4/progtest.m4])
diff --git a/libgpg-error-1.10/autogen.sh b/libgpg-error-1.10/autogen.sh
new file mode 100755
index 0000000..48da7f7
--- /dev/null
+++ b/libgpg-error-1.10/autogen.sh
@@ -0,0 +1,250 @@
+#! /bin/sh
+# Run this to generate all the initial makefiles, etc.
+#
+# Copyright (C) 2003 g10 Code GmbH
+#
+# This file is free software; as a special exception the author gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+configure_ac="configure.ac"
+
+cvtver () {
+ awk 'NR==1 {split($NF,A,".");X=1000000*A[1]+1000*A[2]+A[3];print X;exit 0}'
+}
+
+check_version () {
+ if [ `("$1" --version || echo "0") | cvtver` -ge "$2" ]; then
+ return 0
+ fi
+ echo "**Error**: "\`$1\'" not installed or too old." >&2
+ echo ' Version '$3' or newer is required.' >&2
+ [ -n "$4" ] && echo ' Note that this is part of '\`$4\''.' >&2
+ DIE="yes"
+ return 1
+}
+
+DIE=no
+FORCE=
+if test "$1" = "--force"; then
+ FORCE=" --force"
+ shift
+fi
+
+# Begin list of optional variables sourced from ~/.gnupg-autogen.rc
+w32_toolprefixes=
+w32_extraoptions=
+w32ce_toolprefixes=
+w32ce_extraoptions=
+amd64_toolprefixes=
+# End list of optional variables sourced from ~/.gnupg-autogen.rc
+# What follows are variables which are sourced but default to
+# environment variables or lacking them hardcoded values.
+#w32root=
+#w32ce_root=
+#amd64root=
+
+if [ -f "$HOME/.gnupg-autogen.rc" ]; then
+ echo "sourcing extra definitions from $HOME/.gnupg-autogen.rc"
+ . "$HOME/.gnupg-autogen.rc"
+fi
+
+# Convenience option to use certain configure options for some hosts.
+myhost=""
+myhostsub=""
+case "$1" in
+ --build-w32)
+ myhost="w32"
+ ;;
+ --build-w32ce)
+ myhost="w32"
+ myhostsub="ce"
+ ;;
+ --build*)
+ echo "**Error**: invalid build option $1" >&2
+ exit 1
+ ;;
+ *)
+ ;;
+esac
+
+
+
+# ***** W32 build script *******
+# Used to cross-compile for Windows.
+if [ "$myhost" = "w32" ]; then
+ tmp=`dirname $0`
+ tsdir=`cd "$tmp"; pwd`
+ shift
+ if [ ! -f $tsdir/config.guess ]; then
+ echo "$tsdir/config.guess not found" >&2
+ exit 1
+ fi
+ build=`$tsdir/config.guess`
+
+ case $myhostsub in
+ ce)
+ w32root="$w32ce_root"
+ [ -z "$w32root" ] && w32root="$HOME/w32ce_root"
+ toolprefixes="arm-mingw32ce"
+ ;;
+ *)
+ [ -z "$w32root" ] && w32root="$HOME/w32root"
+ toolprefixes="i586-mingw32msvc i386-mingw32msvc"
+ ;;
+ esac
+ echo "Using $w32root as standard install directory" >&2
+
+ # Locate the cross compiler
+ crossbindir=
+ for host in $toolprefixes; do
+ if ${host}-gcc --version >/dev/null 2>&1 ; then
+ crossbindir=/usr/${host}/bin
+ conf_CC="CC=${host}-gcc"
+ break;
+ fi
+ done
+ if [ -z "$crossbindir" ]; then
+ echo "Cross compiler kit not installed" >&2
+ if [ -z "$sub" ]; then
+ echo "Under Debian GNU/Linux, you may install it using" >&2
+ echo " apt-get install mingw32 mingw32-runtime mingw32-binutils" >&2
+ fi
+ echo "Stop." >&2
+ exit 1
+ fi
+
+ if [ -f "$tsdir/config.log" ]; then
+ if ! head $tsdir/config.log | grep "$host" >/dev/null; then
+ echo "Pease run a 'make distclean' first" >&2
+ exit 1
+ fi
+ fi
+
+ $tsdir/configure --enable-maintainer-mode --prefix=${w32root} \
+ --host=${host} --build=${build} "$@"
+
+ exit $?
+fi
+# ***** end W32 build script *******
+
+
+# ***** AMD64 cross build script *******
+# Used to cross-compile for AMD64 (for testing)
+if test "$1" = "--build-amd64"; then
+ tmp=`dirname $0`
+ tsdir=`cd "$tmp"; pwd`
+ shift
+ if [ ! -f $tsdir/config.guess ]; then
+ echo "$tsdir/config.guess not found" >&2
+ exit 1
+ fi
+ build=`$tsdir/config.guess`
+
+ [ -z "$amd64root" ] && amd64root="$HOME/amd64root"
+ echo "Using $amd64root as standard install directory" >&2
+
+ # Locate the cross compiler
+ crossbindir=
+ for host in x86_64-linux-gnu amd64-linux-gnu; do
+ if ${host}-gcc --version >/dev/null 2>&1 ; then
+ crossbindir=/usr/${host}/bin
+ conf_CC="CC=${host}-gcc"
+ break;
+ fi
+ done
+ if [ -z "$crossbindir" ]; then
+ echo "Cross compiler kit not installed" >&2
+ echo "Stop." >&2
+ exit 1
+ fi
+
+ if [ -f "$tsdir/config.log" ]; then
+ if ! head $tsdir/config.log | grep "$host" >/dev/null; then
+ echo "Please run a 'make distclean' first" >&2
+ exit 1
+ fi
+ fi
+
+ $tsdir/configure --enable-maintainer-mode --prefix=${amd64root} \
+ --host=${host} --build=${build}
+ rc=$?
+ exit $rc
+fi
+# ***** end AMD64 cross build script *******
+
+
+
+# Grep the required versions from configure.ac
+autoconf_vers=`sed -n '/^AC_PREREQ(/ {
+s/^.*(\(.*\))/\1/p
+q
+}' ${configure_ac}`
+autoconf_vers_num=`echo "$autoconf_vers" | cvtver`
+
+automake_vers=`sed -n '/^min_automake_version=/ {
+s/^.*="\(.*\)"/\1/p
+q
+}' ${configure_ac}`
+automake_vers_num=`echo "$automake_vers" | cvtver`
+
+gettext_vers=`sed -n '/^AM_GNU_GETTEXT_VERSION(/ {
+s/^.*(\(.*\))/\1/p
+q
+}' ${configure_ac}`
+gettext_vers_num=`echo "$gettext_vers" | cvtver`
+
+
+if [ -z "$autoconf_vers" -o -z "$automake_vers" -o -z "$gettext_vers" ]
+then
+ echo "**Error**: version information not found in "\`${configure_ac}\'"." >&2
+ exit 1
+fi
+
+# Allow to override the default tool names
+AUTOCONF=${AUTOCONF_PREFIX}${AUTOCONF:-autoconf}${AUTOCONF_SUFFIX}
+AUTOHEADER=${AUTOCONF_PREFIX}${AUTOHEADER:-autoheader}${AUTOCONF_SUFFIX}
+
+AUTOMAKE=${AUTOMAKE_PREFIX}${AUTOMAKE:-automake}${AUTOMAKE_SUFFIX}
+ACLOCAL=${AUTOMAKE_PREFIX}${ACLOCAL:-aclocal}${AUTOMAKE_SUFFIX}
+
+GETTEXT=${GETTEXT_PREFIX}${GETTEXT:-gettext}${GETTEXT_SUFFIX}
+MSGMERGE=${GETTEXT_PREFIX}${MSGMERGE:-msgmerge}${GETTEXT_SUFFIX}
+
+
+if check_version $AUTOCONF $autoconf_vers_num $autoconf_vers ; then
+ check_version $AUTOHEADER $autoconf_vers_num $autoconf_vers autoconf
+fi
+if check_version $AUTOMAKE $automake_vers_num $automake_vers; then
+ check_version $ACLOCAL $automake_vers_num $autoconf_vers automake
+fi
+if check_version $GETTEXT $gettext_vers_num $gettext_vers; then
+ check_version $MSGMERGE $gettext_vers_num $gettext_vers gettext
+fi
+
+if test "$DIE" = "yes"; then
+ cat <<EOF
+
+Note that you may use alternative versions of the tools by setting
+the corresponding environment variables; see README.CVS for details.
+
+EOF
+ exit 1
+fi
+
+echo "Running aclocal -I m4 ${ACLOCAL_FLAGS:+$ACLOCAL_FLAGS }..."
+$ACLOCAL -I m4 $ACLOCAL_FLAGS
+echo "Running autoheader..."
+$AUTOHEADER
+echo "Running automake --gnu ..."
+$AUTOMAKE --gnu;
+echo "Running autoconf${FORCE} ..."
+$AUTOCONF${FORCE}
+
+echo "You may now run
+ ./configure --enable-maintainer-mode && make
+"
diff --git a/libgpg-error-1.10/compile b/libgpg-error-1.10/compile
new file mode 100755
index 0000000..1b1d232
--- /dev/null
+++ b/libgpg-error-1.10/compile
@@ -0,0 +1,142 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand `-c -o'.
+
+scriptversion=2005-05-14.22
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand `-c -o'.
+Remove `-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file `INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+esac
+
+ofile=
+cfile=
+eat=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as `compile cc -o foo foo.c'.
+ # So we strip `-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no `-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # `.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed -e 's|^.*/||' -e 's/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use `[/.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/libgpg-error-1.10/config.guess b/libgpg-error-1.10/config.guess
new file mode 100755
index 0000000..4c8f032
--- /dev/null
+++ b/libgpg-error-1.10/config.guess
@@ -0,0 +1,1508 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+# Free Software Foundation, Inc.
+
+timestamp='2010-09-24'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' HUP INT TERM
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" HUP INT PIPE TERM ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ exit ;;
+ *:SolidBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ *:MirBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE="alpha" ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE="alpha" ;;
+ "EV5 (21164)")
+ UNAME_MACHINE="alphaev5" ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE="alphaev56" ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE="alphapca56" ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE="alphapca57" ;;
+ "EV6 (21264)")
+ UNAME_MACHINE="alphaev6" ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE="alphaev67" ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE="alphaev68" ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE="alphaev69" ;;
+ "EV7 (21364)")
+ UNAME_MACHINE="alphaev7" ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE="alphaev79" ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ exit ;;
+ Alpha\ *:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # Should we change UNAME_MACHINE based on the output of uname instead
+ # of the specific Alpha model?
+ echo alpha-pc-interix
+ exit ;;
+ 21064:Windows_NT:50:3)
+ echo alpha-dec-winnt3.5
+ exit ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo ${UNAME_MACHINE}-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix${UNAME_RELEASE}
+ exit ;;
+ arm:riscos:*:*|arm:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux${UNAME_RELEASE}
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval $set_cc_for_build
+ SUN_ARCH="i386"
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH="x86_64"
+ fi
+ fi
+ echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos${UNAME_RELEASE}
+ ;;
+ sun4)
+ echo sparc-sun-sunos${UNAME_RELEASE}
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos${UNAME_RELEASE}
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint${UNAME_RELEASE}
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint${UNAME_RELEASE}
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint${UNAME_RELEASE}
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint${UNAME_RELEASE}
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten${UNAME_RELEASE}
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten${UNAME_RELEASE}
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix${UNAME_RELEASE}
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix${UNAME_RELEASE}
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c &&
+ dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`$dummy $dummyarg` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos${UNAME_RELEASE}
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ then
+ if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+ [ ${TARGET_BINARY_INTERFACE}x = x ]
+ then
+ echo m88k-dg-dgux${UNAME_RELEASE}
+ else
+ echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ fi
+ else
+ echo i586-dg-dgux${UNAME_RELEASE}
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[4567])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ fi
+ echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ case "${UNAME_MACHINE}" in
+ 9000/31? ) HP_ARCH=m68000 ;;
+ 9000/[34]?? ) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "${sc_cpu_version}" in
+ 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "${sc_kernel_bits}" in
+ 32) HP_ARCH="hppa2.0n" ;;
+ 64) HP_ARCH="hppa2.0w" ;;
+ '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "${HP_ARCH}" = "" ]; then
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ ${HP_ARCH} = "hppa2.0w" ]
+ then
+ eval $set_cc_for_build
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH="hppa2.0w"
+ else
+ HP_ARCH="hppa64"
+ fi
+ fi
+ echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux${HPUX_REV}
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo ${UNAME_MACHINE}-unknown-osf1mk
+ else
+ echo ${UNAME_MACHINE}-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+ FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:BSD/OS:*:*)
+ echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ exit ;;
+ *:FreeBSD:*:*)
+ case ${UNAME_MACHINE} in
+ pc98)
+ echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ amd64)
+ echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ *)
+ echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ esac
+ exit ;;
+ i*:CYGWIN*:*)
+ echo ${UNAME_MACHINE}-pc-cygwin
+ exit ;;
+ *:MINGW*:*)
+ echo ${UNAME_MACHINE}-pc-mingw32
+ exit ;;
+ i*:windows32*:*)
+ # uname -m includes "-pc" on this system.
+ echo ${UNAME_MACHINE}-mingw32
+ exit ;;
+ i*:PW*:*)
+ echo ${UNAME_MACHINE}-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case ${UNAME_MACHINE} in
+ x86)
+ echo i586-pc-interix${UNAME_RELEASE}
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix${UNAME_RELEASE}
+ exit ;;
+ esac ;;
+ [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+ echo i${UNAME_MACHINE}-pc-mks
+ exit ;;
+ 8664:Windows_NT:*)
+ echo x86_64-pc-mks
+ exit ;;
+ i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+ # How do we know it's Interix rather than the generic POSIX subsystem?
+ # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+ # UNAME_MACHINE based on the output of uname instead of i386?
+ echo i586-pc-interix
+ exit ;;
+ i*:UWIN*:*)
+ echo ${UNAME_MACHINE}-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ p*:CYGWIN*:*)
+ echo powerpcle-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+ exit ;;
+ i*86:Minix:*:*)
+ echo ${UNAME_MACHINE}-pc-minix
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+ echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+ exit ;;
+ arm*:Linux:*:*)
+ eval $set_cc_for_build
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ else
+ echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ cris:Linux:*:*)
+ echo cris-axis-linux-gnu
+ exit ;;
+ crisv32:Linux:*:*)
+ echo crisv32-axis-linux-gnu
+ exit ;;
+ frv:Linux:*:*)
+ echo frv-unknown-linux-gnu
+ exit ;;
+ i*86:Linux:*:*)
+ LIBC=gnu
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #ifdef __dietlibc__
+ LIBC=dietlibc
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+ exit ;;
+ ia64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m32r*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ m68*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval $set_cc_for_build
+ sed 's/^ //' << EOF >$dummy.c
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
+ test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+ ;;
+ or32:Linux:*:*)
+ echo or32-unknown-linux-gnu
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-gnu
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-gnu
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-gnu ;;
+ PA8*) echo hppa2.0-unknown-linux-gnu ;;
+ *) echo hppa-unknown-linux-gnu ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-gnu
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-gnu
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo ${UNAME_MACHINE}-ibm-linux
+ exit ;;
+ sh64*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sh*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ tile*:Linux:*:*)
+ echo ${UNAME_MACHINE}-tilera-linux-gnu
+ exit ;;
+ vax:Linux:*:*)
+ echo ${UNAME_MACHINE}-dec-linux-gnu
+ exit ;;
+ x86_64:Linux:*:*)
+ echo x86_64-unknown-linux-gnu
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-gnu
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo ${UNAME_MACHINE}-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo ${UNAME_MACHINE}-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo ${UNAME_MACHINE}-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo ${UNAME_MACHINE}-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ i*86:*DOS:*:*)
+ echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+ UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ else
+ echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ else
+ echo ${UNAME_MACHINE}-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configury will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv${UNAME_RELEASE}
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo ${UNAME_MACHINE}-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo ${UNAME_MACHINE}-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux${UNAME_RELEASE}
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv${UNAME_RELEASE}
+ else
+ echo mips-unknown-sysv${UNAME_RELEASE}
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux${UNAME_RELEASE}
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux${UNAME_RELEASE}
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Rhapsody:*:*)
+ echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ case $UNAME_PROCESSOR in
+ i386)
+ eval $set_cc_for_build
+ if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ UNAME_PROCESSOR="x86_64"
+ fi
+ fi ;;
+ unknown) UNAME_PROCESSOR=powerpc ;;
+ esac
+ echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = "x86"; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NEO-?:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSE-?:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ NSR-?:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk${UNAME_RELEASE}
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = "386"; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo ${UNAME_MACHINE}-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux${UNAME_RELEASE}
+ exit ;;
+ *:DragonFly:*:*)
+ echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "${UNAME_MACHINE}" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ exit ;;
+ i*86:rdos:*:*)
+ echo ${UNAME_MACHINE}-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo ${UNAME_MACHINE}-pc-aros
+ exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+ /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
+ I don't know.... */
+ printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+ printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+ "4"
+#else
+ ""
+#endif
+ ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+ printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+ printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+ int version;
+ version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+ if (version < 4)
+ printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+ else
+ printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+ exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+ printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+ printf ("ns32k-encore-mach\n"); exit (0);
+#else
+ printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+ printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+ printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+ printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+ struct utsname un;
+
+ uname(&un);
+
+ if (strncmp(un.version, "V2", 2) == 0) {
+ printf ("i386-sequent-ptx2\n"); exit (0);
+ }
+ if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+ printf ("i386-sequent-ptx1\n"); exit (0);
+ }
+ printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+# include <sys/param.h>
+# if defined (BSD)
+# if BSD == 43
+ printf ("vax-dec-bsd4.3\n"); exit (0);
+# else
+# if BSD == 199006
+ printf ("vax-dec-bsd4.3reno\n"); exit (0);
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# endif
+# else
+ printf ("vax-dec-bsd\n"); exit (0);
+# endif
+# else
+ printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+ printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+ exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+ { echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+ case `getsysinfo -f cpu_type` in
+ c1*)
+ echo c1-convex-bsd
+ exit ;;
+ c2*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ c34*)
+ echo c34-convex-bsd
+ exit ;;
+ c38*)
+ echo c38-convex-bsd
+ exit ;;
+ c4*)
+ echo c4-convex-bsd
+ exit ;;
+ esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+ http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/libgpg-error-1.10/config.h.in b/libgpg-error-1.10/config.h.in
new file mode 100644
index 0000000..977c5f3
--- /dev/null
+++ b/libgpg-error-1.10/config.h.in
@@ -0,0 +1,152 @@
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if translation of program messages to the user's native
+ language is requested. */
+#undef ENABLE_NLS
+
+/* Define to 1 if you have the MacOS X function CFLocaleCopyCurrent in the
+ CoreFoundation framework. */
+#undef HAVE_CFLOCALECOPYCURRENT
+
+/* Define to 1 if you have the MacOS X function CFPreferencesCopyAppValue in
+ the CoreFoundation framework. */
+#undef HAVE_CFPREFERENCESCOPYAPPVALUE
+
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+ */
+#undef HAVE_DCGETTEXT
+
+/* Define to 1 if you have the declaration of `strerror_r', and to 0 if you
+ don't. */
+#undef HAVE_DECL_STRERROR_R
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define if the GNU gettext() function is already present or preinstalled. */
+#undef HAVE_GETTEXT
+
+/* Define if you have the iconv() function and it works. */
+#undef HAVE_ICONV
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <locale.h> header file. */
+#undef HAVE_LOCALE_H
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strerror_r' function. */
+#undef HAVE_STRERROR_R
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Defined if we run on WindowsCE */
+#undef HAVE_W32CE_SYSTEM
+
+/* Defined if we run on a W32 API based system */
+#undef HAVE_W32_SYSTEM
+
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+ */
+#undef LT_OBJDIR
+
+/* Define to 1 if your C compiler doesn't accept -c and -o together. */
+#undef NO_MINUS_C_MINUS_O
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if strerror_r returns char *. */
+#undef STRERROR_R_CHAR_P
+
+/* Enable extensions on AIX 3, Interix. */
+#ifndef _ALL_SOURCE
+# undef _ALL_SOURCE
+#endif
+/* Enable GNU extensions on systems that have them. */
+#ifndef _GNU_SOURCE
+# undef _GNU_SOURCE
+#endif
+/* Enable threading extensions on Solaris. */
+#ifndef _POSIX_PTHREAD_SEMANTICS
+# undef _POSIX_PTHREAD_SEMANTICS
+#endif
+/* Enable extensions on HP NonStop. */
+#ifndef _TANDEM_SOURCE
+# undef _TANDEM_SOURCE
+#endif
+/* Enable general extensions on Solaris. */
+#ifndef __EXTENSIONS__
+# undef __EXTENSIONS__
+#endif
+
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to 1 if on MINIX. */
+#undef _MINIX
+
+/* Define to 2 if the system does not provide POSIX.1 features except with
+ this defined. */
+#undef _POSIX_1_SOURCE
+
+/* Define to 1 if you need to in order for `stat' and other things to work. */
+#undef _POSIX_SOURCE
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+
+/* Force using of NLS for W32 even if no libintl has been found. This is
+ okay because we have our own gettext implementation for W32. */
+#if defined(HAVE_W32_SYSTEM) && !defined(ENABLE_NLS)
+#define ENABLE_NLS 1
+#endif
+/* For building we need to define these macro. */
+#define GPG_ERR_ENABLE_GETTEXT_MACROS 1
+#define GPG_ERR_ENABLE_ERRNO_MACROS 1
+
diff --git a/libgpg-error-1.10/config.rpath b/libgpg-error-1.10/config.rpath
new file mode 100755
index 0000000..c547c68
--- /dev/null
+++ b/libgpg-error-1.10/config.rpath
@@ -0,0 +1,666 @@
+#! /bin/sh
+# Output a system dependent set of variables, describing how to set the
+# run time search path of shared libraries in an executable.
+#
+# Copyright 1996-2007 Free Software Foundation, Inc.
+# Taken from GNU libtool, 2001
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# The first argument passed to this file is the canonical host specification,
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+# should be set by the caller.
+#
+# The set of defined variables is at the end of this script.
+
+# Known limitations:
+# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
+# than 256 bytes, otherwise the compiler driver will dump core. The only
+# known workaround is to choose shorter directory names for the build
+# directory and/or the installation directory.
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+shrext=.so
+
+host="$1"
+host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+# Code taken from libtool.m4's _LT_CC_BASENAME.
+
+for cc_temp in $CC""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`echo "$cc_temp" | sed -e 's%^.*/%%'`
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC.
+
+wl=
+if test "$GCC" = yes; then
+ wl='-Wl,'
+else
+ case "$host_os" in
+ aix*)
+ wl='-Wl,'
+ ;;
+ darwin*)
+ case $cc_basename in
+ xlc*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | pw32* | os2*)
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ wl='-Wl,'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ wl='-Wl,'
+ ;;
+ newsos6)
+ ;;
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ icc* | ecc*)
+ wl='-Wl,'
+ ;;
+ pgcc | pgf77 | pgf90)
+ wl='-Wl,'
+ ;;
+ ccc*)
+ wl='-Wl,'
+ ;;
+ como)
+ wl='-lopt='
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ wl='-Wl,'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ osf3* | osf4* | osf5*)
+ wl='-Wl,'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ wl='-Wl,'
+ ;;
+ sunos4*)
+ wl='-Qoption ld '
+ ;;
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ wl='-Wl,'
+ ;;
+ sysv4*MP*)
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ wl='-Wl,'
+ ;;
+ unicos*)
+ wl='-Wl,'
+ ;;
+ uts4*)
+ ;;
+ esac
+fi
+
+# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS.
+
+hardcode_libdir_flag_spec=
+hardcode_libdir_separator=
+hardcode_direct=no
+hardcode_minus_L=no
+
+case "$host_os" in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+esac
+
+ld_shlibs=yes
+if test "$with_gnu_ld" = yes; then
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ # Unlike libtool, we use -rpath here, not --rpath, since the documented
+ # option of GNU ld is called -rpath, not --rpath.
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ case "$host_os" in
+ aix3* | aix4* | aix5*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we cannot use
+ # them.
+ ld_shlibs=no
+ ;;
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ cygwin* | mingw* | pw32*)
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ gnu* | linux* | k*bsd*-gnu)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ netbsd*)
+ ;;
+ solaris*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+ sunos4*)
+ hardcode_direct=yes
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ :
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ if test "$ld_shlibs" = no; then
+ hardcode_libdir_flag_spec=
+ fi
+else
+ case "$host_os" in
+ aix3*)
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ else
+ aix_use_runtimelinking=no
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+ fi
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ fi
+ # Begin _LT_AC_SYS_LIBPATH_AIX.
+ echo 'int main () { return 0; }' > conftest.c
+ ${CC} ${LDFLAGS} conftest.c -o conftest
+ aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+ fi
+ if test -z "$aix_libpath"; then
+ aix_libpath="/usr/lib:/lib"
+ fi
+ rm -f conftest.c conftest
+ # End _LT_AC_SYS_LIBPATH_AIX.
+ if test "$aix_use_runtimelinking" = yes; then
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ else
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ fi
+ fi
+ ;;
+ amigaos*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+ bsdi[45]*)
+ ;;
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ libext=lib
+ ;;
+ darwin* | rhapsody*)
+ hardcode_direct=no
+ if test "$GCC" = yes ; then
+ :
+ else
+ case $cc_basename in
+ xlc*)
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+ dgux*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+ freebsd2.2*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ freebsd2*)
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ freebsd* | dragonfly*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ hpux9*)
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ hpux10*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+ hpux11*)
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ ;;
+ *)
+ hardcode_direct=yes
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+ irix5* | irix6* | nonstopux*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ netbsd*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ ;;
+ newsos6)
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ else
+ case "$host_os" in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ osf3*)
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+ osf4* | osf5*)
+ if test "$GCC" = yes; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ # Both cc and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+ solaris*)
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ sunos4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ ;;
+ sysv4)
+ case $host_vendor in
+ sni)
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ hardcode_direct=no
+ ;;
+ motorola)
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ ;;
+ sysv4.3*)
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ ld_shlibs=yes
+ fi
+ ;;
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ ;;
+ sysv5* | sco3.2v5* | sco5v6*)
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
+ ;;
+ uts4*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+fi
+
+# Check dynamic linker characteristics
+# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER.
+# Unlike libtool.m4, here we don't care about _all_ names of the library, but
+# only about the one the linker finds when passed -lNAME. This is the last
+# element of library_names_spec in libtool.m4, or possibly two of them if the
+# linker has special search rules.
+library_names_spec= # the last element of library_names_spec in libtool.m4
+libname_spec='lib$name'
+case "$host_os" in
+ aix3*)
+ library_names_spec='$libname.a'
+ ;;
+ aix4* | aix5*)
+ library_names_spec='$libname$shrext'
+ ;;
+ amigaos*)
+ library_names_spec='$libname.a'
+ ;;
+ beos*)
+ library_names_spec='$libname$shrext'
+ ;;
+ bsdi[45]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ cygwin* | mingw* | pw32*)
+ shrext=.dll
+ library_names_spec='$libname.dll.a $libname.lib'
+ ;;
+ darwin* | rhapsody*)
+ shrext=.dylib
+ library_names_spec='$libname$shrext'
+ ;;
+ dgux*)
+ library_names_spec='$libname$shrext'
+ ;;
+ freebsd1*)
+ ;;
+ freebsd* | dragonfly*)
+ case "$host_os" in
+ freebsd[123]*)
+ library_names_spec='$libname$shrext$versuffix' ;;
+ *)
+ library_names_spec='$libname$shrext' ;;
+ esac
+ ;;
+ gnu*)
+ library_names_spec='$libname$shrext'
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $host_cpu in
+ ia64*)
+ shrext=.so
+ ;;
+ hppa*64*)
+ shrext=.sl
+ ;;
+ *)
+ shrext=.sl
+ ;;
+ esac
+ library_names_spec='$libname$shrext'
+ ;;
+ interix[3-9]*)
+ library_names_spec='$libname$shrext'
+ ;;
+ irix5* | irix6* | nonstopux*)
+ library_names_spec='$libname$shrext'
+ case "$host_os" in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;;
+ *) libsuff= shlibsuff= ;;
+ esac
+ ;;
+ esac
+ ;;
+ linux*oldld* | linux*aout* | linux*coff*)
+ ;;
+ linux* | k*bsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ knetbsd*-gnu)
+ library_names_spec='$libname$shrext'
+ ;;
+ netbsd*)
+ library_names_spec='$libname$shrext'
+ ;;
+ newsos6)
+ library_names_spec='$libname$shrext'
+ ;;
+ nto-qnx*)
+ library_names_spec='$libname$shrext'
+ ;;
+ openbsd*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ os2*)
+ libname_spec='$name'
+ shrext=.dll
+ library_names_spec='$libname.a'
+ ;;
+ osf3* | osf4* | osf5*)
+ library_names_spec='$libname$shrext'
+ ;;
+ rdos*)
+ ;;
+ solaris*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sunos4*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
+ sysv4 | sysv4.3*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv4*MP*)
+ library_names_spec='$libname$shrext'
+ ;;
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ library_names_spec='$libname$shrext'
+ ;;
+ uts4*)
+ library_names_spec='$libname$shrext'
+ ;;
+esac
+
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"`
+shlibext=`echo "$shrext" | sed -e 's,^\.,,'`
+escaped_libname_spec=`echo "X$libname_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_library_names_spec=`echo "X$library_names_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"`
+
+LC_ALL=C sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <<EOF
+
+# How to pass a linker flag through the compiler.
+wl="$escaped_wl"
+
+# Static library suffix (normally "a").
+libext="$libext"
+
+# Shared library suffix (normally "so").
+shlibext="$shlibext"
+
+# Format of library name prefix.
+libname_spec="$escaped_libname_spec"
+
+# Library names that the linker finds when passed -lNAME.
+library_names_spec="$escaped_library_names_spec"
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec="$escaped_hardcode_libdir_flag_spec"
+
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator="$hardcode_libdir_separator"
+
+# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct="$hardcode_direct"
+
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L="$hardcode_minus_L"
+
+EOF
diff --git a/libgpg-error-1.10/config.sub b/libgpg-error-1.10/config.sub
new file mode 100755
index 0000000..320e303
--- /dev/null
+++ b/libgpg-error-1.10/config.sub
@@ -0,0 +1,1739 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
+# Free Software Foundation, Inc.
+
+timestamp='2010-09-11'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free
+Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -windowsnt*)
+ os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+ | bfin \
+ | c4x | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | fido | fr30 | frv \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | i370 | i860 | i960 | ia64 \
+ | ip2k | iq2000 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 \
+ | ns16k | ns32k \
+ | or32 \
+ | pdp10 | pdp11 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+ | pyramid \
+ | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu | strongarm \
+ | tahoe | thumb | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e \
+ | we32k \
+ | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | picochip)
+ # Motorola 68HC11/12.
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* | microblaze-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+ | pyramid-* \
+ | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+ | tahoe-* | thumb-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile-* | tilegx-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | vax-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-unknown
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2* | dpx2*-bull)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppa-next)
+ os=-nextstep3
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+# I'm not sure what "Sysv32" means. Should this be sysv3.2?
+ i*86v32)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ i386-vsta | vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ m88k-omron*)
+ basic_machine=m88k-omron
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw32)
+ basic_machine=i386-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next )
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc) basic_machine=powerpc-unknown
+ ;;
+ ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle | ppc-le | powerpc-little)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh)
+ basic_machine=sh-hitachi
+ os=-hms
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ sh64)
+ basic_machine=sh64-unknown
+ ;;
+ sparclite-wrs | simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ # This must be matched before tile*.
+ tilegx*)
+ basic_machine=tilegx-unknown
+ os=-linux-gnu
+ ;;
+ tile*)
+ basic_machine=tile-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ z8k-*-coff)
+ basic_machine=z8k-unknown
+ os=-sim
+ ;;
+ z80-*-coff)
+ basic_machine=z80-unknown
+ os=-sim
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp10)
+ # there are many clones, so DEC is not a safe bet
+ basic_machine=pdp10-unknown
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+ basic_machine=sparc-sun
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases
+ # that might get confused with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # First accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST END IN A *, to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -openbsd* | -solidbsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+ | -chorusos* | -chorusrdb* | -cegcc* \
+ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -mingw32* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo $os | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -osfrose*)
+ os=-osfrose
+ ;;
+ -osf*)
+ os=-osf
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2 )
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -es1800*)
+ os=-ose
+ ;;
+ -xenix)
+ os=-xenix
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -aros*)
+ os=-aros
+ ;;
+ -kaos*)
+ os=-kaos
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -nacl*)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ # This also exists in the configure program, but was not the
+ # default.
+ # os=-sunos4
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-haiku)
+ os=-haiku
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next )
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-next)
+ os=-nextstep3
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/libgpg-error-1.10/configure b/libgpg-error-1.10/configure
new file mode 100755
index 0000000..b7a43f2
--- /dev/null
+++ b/libgpg-error-1.10/configure
@@ -0,0 +1,16304 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.64 for libgpg-error 1.10.
+#
+# Report bugs to <bug-gnupg@gnupg.org>.
+#
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ # We cannot yet assume a decent shell, so we have to provide a
+ # neutralization value for shells without unset; and this also
+ # works around shells that cannot unset nonexistent variables.
+ BASH_ENV=/dev/null
+ ENV=/dev/null
+ (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: bug-gnupg@gnupg.org about your system, including any
+$0: error possibly output before this message. Then install
+$0: a modern shell, or manually run the script under such a
+$0: shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$lt_ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
+ ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<_LT_EOF
+$*
+_LT_EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
+
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
+ fi
+ fi
+ fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
+
+exec 7<&0 </dev/null 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libgpg-error'
+PACKAGE_TARNAME='libgpg-error'
+PACKAGE_VERSION='1.10'
+PACKAGE_STRING='libgpg-error 1.10'
+PACKAGE_BUGREPORT='bug-gnupg@gnupg.org'
+PACKAGE_URL=''
+
+ac_unique_file="src/err-sources.h.in"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+gt_needs=
+ac_subst_vars='LTLIBOBJS
+LIBOBJS
+LANGUAGES_SOME_FALSE
+LANGUAGES_SOME_TRUE
+HAVE_W32CE_SYSTEM_FALSE
+HAVE_W32CE_SYSTEM_TRUE
+HAVE_W32_SYSTEM_FALSE
+HAVE_W32_SYSTEM_TRUE
+BUILD_FILEVERSION
+BUILD_TIMESTAMP
+GPG_ERROR_CONFIG_ISUBDIRAFTER
+GPG_ERROR_CONFIG_CFLAGS
+GPG_ERROR_CONFIG_LIBS
+POSUB
+LTLIBINTL
+LIBINTL
+INTLLIBS
+LTLIBICONV
+LIBICONV
+INTL_MACOSX_LIBS
+XGETTEXT_EXTRA_OPTIONS
+MSGMERGE
+XGETTEXT_015
+XGETTEXT
+GMSGFMT_015
+MSGFMT_015
+GMSGFMT
+MSGFMT
+GETTEXT_MACRO_VERSION
+USE_NLS
+CC_FOR_BUILD
+RC
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+lt_ECHO
+RANLIB
+LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
+SED
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+EGREP
+GREP
+AR
+CPP
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__quote
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+LIBGPG_ERROR_LT_REVISION
+LIBGPG_ERROR_LT_AGE
+LIBGPG_ERROR_LT_CURRENT
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_maintainer_mode
+enable_dependency_tracking
+enable_static
+enable_shared
+with_pic
+enable_fast_install
+with_gnu_ld
+enable_libtool_lock
+enable_nls
+enable_rpath
+with_libiconv_prefix
+with_libintl_prefix
+enable_languages
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CPP
+CC_FOR_BUILD'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures libgpg-error 1.10 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/libgpg-error]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of libgpg-error 1.10:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-static[=PKGS] build static libraries [default=no]
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
+ --disable-nls do not use Native Language Support
+ --disable-rpath do not hardcode runtime library paths
+ --disable-languages do not build support for other languages than C
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-gnu-ld assume the C compiler uses GNU ld default=no
+ --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib
+ --without-libiconv-prefix don't search for libiconv in includedir and libdir
+ --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib
+ --without-libintl-prefix don't search for libintl in includedir and libdir
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+ CC_FOR_BUILD
+ build system C compiler
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <bug-gnupg@gnupg.org>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+libgpg-error configure 1.10
+generated by GNU Autoconf 2.64
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } >/dev/null && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+ # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_header_compiler=yes
+else
+ ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
+
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ ac_header_preproc=yes
+else
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+ yes:no: )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+ ;;
+ no:yes:* )
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( cat <<\_ASBOX
+## ---------------------------------- ##
+## Report this to bug-gnupg@gnupg.org ##
+## ---------------------------------- ##
+_ASBOX
+ ) | sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_mongrel
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ $as_test_x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+ return $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_decl LINENO SYMBOL VAR
+# ------------------------------------
+# Tests whether SYMBOL is declared, setting cache variable VAR accordingly.
+ac_fn_c_check_decl ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $2 is declared" >&5
+$as_echo_n "checking whether $2 is declared... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+#ifndef $2
+ (void) $2;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+
+} # ac_fn_c_check_decl
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libgpg-error $as_me 1.10, which was
+generated by GNU Autoconf 2.64. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+gt_needs="$gt_needs "
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# LT Version numbers, remember to change them just *before* a release.
+# (Code changed: REVISION++)
+# (Interfaces added/removed/changed: CURRENT++, REVISION=0)
+# (Interfaces added: AGE++)
+# (Interfaces removed: AGE=0)
+# Note that added error codes don't constitute an interface change.
+LIBGPG_ERROR_LT_CURRENT=8
+LIBGPG_ERROR_LT_AGE=8
+LIBGPG_ERROR_LT_REVISION=0
+
+
+
+
+am__api_version='1.10'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ for ac_t in install-sh install.sh shtool; do
+ if test -f "$ac_dir/$ac_t"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/$ac_t -c"
+ break 2
+ fi
+ done
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error "ls -t appears to fail. Make sure there is not a broken
+alias in your environment" "$LINENO" 5
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if test "${ac_cv_path_mkdir+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ test -d ./--version && rmdir ./--version
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libgpg-error'
+ VERSION='1.10'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+
+# We need to know about the host architecture to avoid spurious
+# warnings.
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if test "${ac_cv_host+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild project... ${PACKAGE_NAME:-$PACKAGE}" >&5
+$as_echo "$as_me: autobuild project... ${PACKAGE_NAME:-$PACKAGE}" >&6;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild revision... ${PACKAGE_VERSION:-$VERSION}" >&5
+$as_echo "$as_me: autobuild revision... ${PACKAGE_VERSION:-$VERSION}" >&6;}
+ hostname=`hostname`
+ if test "$hostname"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild hostname... $hostname" >&5
+$as_echo "$as_me: autobuild hostname... $hostname" >&6;}
+ fi
+
+ date=`date +%Y%m%d-%H%M%S`
+ if test "$?" != 0; then
+ date=`date`
+ fi
+ if test "$date"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: autobuild timestamp... $date" >&5
+$as_echo "$as_me: autobuild timestamp... $date" >&6;}
+ fi
+
+
+# Checks for programs.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ rm -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+if test -z "$ac_file"; then :
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
+fi
+ac_exeext=$ac_cv_exeext
+
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
+ac_clean_files=$ac_clean_files_save
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if test "${ac_cv_objext+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if test "${ac_cv_prog_cc_g+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
+$as_echo_n "checking for style of include used by $am_make... " >&6; }
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
+$as_echo "$_am_result" >&6; }
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+if test "x$CC" != xcc; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
+$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
+$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
+fi
+set dummy $CC; ac_cc=`$as_echo "$2" |
+ sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+rm -f conftest2.*
+if { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } &&
+ test -f conftest2.$ac_objext && { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; };
+then
+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+ if test "x$CC" != xcc; then
+ # Test first that cc exists at all.
+ if { ac_try='cc -c conftest.$ac_ext >&5'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
+ rm -f conftest2.*
+ if { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } &&
+ test -f conftest2.$ac_objext && { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; };
+ then
+ # cc works too.
+ :
+ else
+ # cc exists but doesn't like -o.
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ fi
+ fi
+ fi
+else
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f core conftest*
+
+fi
+if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
+
+fi
+
+# FIXME: we rely on the cache variable name because
+# there is no other way.
+set dummy $CC
+am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AWK+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AR" = x; then
+ AR=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+ ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = x""yes; then :
+ MINIX=yes
+else
+ MINIX=
+fi
+
+
+ if test "$MINIX" = yes; then
+
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
+
+
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
+
+
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+ fi
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if test "${ac_cv_safe_to_define___extensions__+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+# define __EXTENSIONS__ 1
+ $ac_includes_default
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_safe_to_define___extensions__=yes
+else
+ ac_cv_safe_to_define___extensions__=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+ test $ac_cv_safe_to_define___extensions__ = yes &&
+ $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
+
+ $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
+
+ $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
+
+ $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
+
+ $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
+
+
+
+
+
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.2.6'
+macro_revision='1.3012'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if test "${ac_cv_path_SED+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${lt_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if test "${lt_cv_path_NM+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if test "${lt_cv_nm_interface+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:5147: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:5150: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:5153: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if test "${lt_cv_deplibs_check_method+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AR="ar"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 6355 "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if test "${lt_cv_cc_needs_belf+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+else
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[012]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+# Set options
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+ ac_ct_AS=$AS
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AS"; then
+ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_AS="as"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AS" = x; then
+ AS="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AS=$ac_ct_AS
+ fi
+else
+ AS="$ac_cv_prog_AS"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+ ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+# Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=no
+fi
+
+
+
+
+
+
+
+
+
+
+ enable_dlopen=no
+
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+
+test -z "$pic_mode" && pic_mode=default
+
+
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if test "${lt_cv_objdir+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:7914: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:7918: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl*)
+ # IBM XL C 8.0/Fortran 10.1 on PPC
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Sun\ F*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+$as_echo "$lt_prog_compiler_pic" >&6; }
+
+
+
+
+
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:8253: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:8257: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:8358: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:8362: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:8413: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:8417: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test "$hard_links" = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+ if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ link_all_deplibs=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ export_dynamic_flag_spec='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ whole_archive_flag_spec=''
+ link_all_deplibs=yes
+ allow_undefined_flag="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=echo
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec_ld='+b $libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo(void) {}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS="$save_LDFLAGS"
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ archive_cmds_need_lc=no
+ else
+ archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
+$as_echo "$archive_cmds_need_lc" >&6; }
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH printed by
+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
+ # path with ; separators, and with drive letters. We can handle the
+ # drive letters (cygwin fileutils understands them), so leave them,
+ # especially as we might pass files found there to a mingw objdump,
+ # which wouldn't understand a cygwinified path. Ahh.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+interix[3-9]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+ test "$inherit_rpath" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = x""yes; then :
+ lt_cv_dlopen="shl_load"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = x""yes; then :
+ lt_cv_dlopen="dlopen"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 10793 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self_static+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line 10889 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report which library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}windres", so it can be a program name with args.
+set dummy ${ac_tool_prefix}windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_RC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RC"; then
+ ac_cv_prog_RC="$RC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_RC="${ac_tool_prefix}windres"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RC=$ac_cv_prog_RC
+if test -n "$RC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RC" >&5
+$as_echo "$RC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RC"; then
+ ac_ct_RC=$RC
+ # Extract the first word of "windres", so it can be a program name with args.
+set dummy windres; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_RC+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RC"; then
+ ac_cv_prog_ac_ct_RC="$ac_ct_RC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_ac_ct_RC="windres"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RC=$ac_cv_prog_ac_ct_RC
+if test -n "$ac_ct_RC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RC" >&5
+$as_echo "$ac_ct_RC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RC" = x; then
+ RC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RC=$ac_ct_RC
+ fi
+else
+ RC="$ac_cv_prog_RC"
+fi
+
+
+
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+objext_RC=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+compiler_RC=$CC
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+lt_cv_prog_compiler_c_o_RC=yes
+
+if test -n "$compiler"; then
+ :
+
+
+
+fi
+
+GCC=$lt_save_GCC
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC="$lt_save_CC"
+
+
+
+# We need to compile and run a program on the build machine.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for cc for build" >&5
+$as_echo_n "checking for cc for build... " >&6; }
+if test "$cross_compiling" = "yes"; then
+ CC_FOR_BUILD="${CC_FOR_BUILD-cc}"
+else
+ CC_FOR_BUILD="${CC_FOR_BUILD-$CC}"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC_FOR_BUILD" >&5
+$as_echo "$CC_FOR_BUILD" >&6; }
+
+
+
+# Set some internal variables depending on the platform for later use.
+have_w32_system=no
+have_w32ce_system=no
+case "${host}" in
+ *-mingw32ce*)
+ have_w32_system=yes
+ have_w32ce_system=yes
+ ;;
+ *-mingw32*)
+ have_w32_system=yes
+ ;;
+ *)
+ ;;
+esac
+
+
+
+
+
+# Note, that autogen.sh greps for the next line.
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
+$as_echo_n "checking whether NLS is requested... " >&6; }
+ # Check whether --enable-nls was given.
+if test "${enable_nls+set}" = set; then :
+ enableval=$enable_nls; USE_NLS=$enableval
+else
+ USE_NLS=yes
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+
+
+
+
+ GETTEXT_MACRO_VERSION=0.17
+
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgfmt", so it can be a program name with args.
+set dummy msgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_MSGFMT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$MSGFMT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --statistics /dev/null >&5 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":"
+ ;;
+esac
+fi
+MSGFMT="$ac_cv_path_MSGFMT"
+if test "$MSGFMT" != ":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGFMT" >&5
+$as_echo "$MSGFMT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ # Extract the first word of "gmsgfmt", so it can be a program name with args.
+set dummy gmsgfmt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_GMSGFMT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $GMSGFMT in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
+ ;;
+esac
+fi
+GMSGFMT=$ac_cv_path_GMSGFMT
+if test -n "$GMSGFMT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GMSGFMT" >&5
+$as_echo "$GMSGFMT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+ case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+ *) MSGFMT_015=$MSGFMT ;;
+ esac
+
+ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+ *) GMSGFMT_015=$GMSGFMT ;;
+ esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "xgettext", so it can be a program name with args.
+set dummy xgettext; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_XGETTEXT+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$XGETTEXT" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&5 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then
+ ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
+ ;;
+esac
+fi
+XGETTEXT="$ac_cv_path_XGETTEXT"
+if test "$XGETTEXT" != ":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $XGETTEXT" >&5
+$as_echo "$XGETTEXT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ rm -f messages.po
+
+ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+ *) XGETTEXT_015=$XGETTEXT ;;
+ esac
+
+
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "msgmerge", so it can be a program name with args.
+set dummy msgmerge; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_path_MSGMERGE+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ case "$MSGMERGE" in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&5
+ if $ac_dir/$ac_word --update -q /dev/null /dev/null >&5 2>&1; then
+ ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+ test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":"
+ ;;
+esac
+fi
+MSGMERGE="$ac_cv_path_MSGMERGE"
+if test "$MSGMERGE" != ":"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MSGMERGE" >&5
+$as_echo "$MSGMERGE" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$localedir" || localedir='${datadir}/locale'
+
+
+ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+
+
+ ac_config_commands="$ac_config_commands po-directories"
+
+
+
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by GCC" >&5
+$as_echo_n "checking for ld used by GCC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | [A-Za-z]:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${acl_cv_path_LD+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${acl_cv_prog_gnu_ld+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_prog_gnu_ld" >&5
+$as_echo "$acl_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$acl_cv_prog_gnu_ld
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shared library run path origin" >&5
+$as_echo_n "checking for shared library run path origin... " >&6; }
+if test "${acl_cv_rpath+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
+$as_echo "$acl_cv_rpath" >&6; }
+ wl="$acl_cv_wl"
+ acl_libext="$acl_cv_libext"
+ acl_shlibext="$acl_cv_shlibext"
+ acl_libname_spec="$acl_cv_libname_spec"
+ acl_library_names_spec="$acl_cv_library_names_spec"
+ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ acl_hardcode_direct="$acl_cv_hardcode_direct"
+ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ # Check whether --enable-rpath was given.
+if test "${enable_rpath+set}" = set; then :
+ enableval=$enable_rpath; :
+else
+ enable_rpath=yes
+fi
+
+
+
+ acl_libdirstem=lib
+ searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+ if test -n "$searchpath"; then
+ acl_save_IFS="${IFS= }"; IFS=":"
+ for searchdir in $searchpath; do
+ if test -d "$searchdir"; then
+ case "$searchdir" in
+ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+ *) searchdir=`cd "$searchdir" && pwd`
+ case "$searchdir" in
+ */lib64 ) acl_libdirstem=lib64 ;;
+ esac ;;
+ esac
+ fi
+ done
+ IFS="$acl_save_IFS"
+ fi
+
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then :
+ withval=$with_libiconv_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+
+fi
+
+ LIBICONV=
+ LTLIBICONV=
+ INCICONV=
+ LIBICONV_PREFIX=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='iconv '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
+ if test -n "$acl_shlibext"; then
+ shrext=".$acl_shlibext" # typically: shrext=.so
+ else
+ shrext=
+ fi
+ if test $use_additional = yes; then
+ dir="$additional_libdir"
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$acl_hardcode_direct" = yes; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
+ fi
+ if test "$acl_hardcode_minus_L" != no; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a"
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ LIBICONV_PREFIX="$basedir"
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBICONV; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$dep"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$acl_hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir"
+ done
+ fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
+$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
+if test "${gt_cv_func_CFPreferencesCopyAppValue+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <CoreFoundation/CFPreferences.h>
+int
+main ()
+{
+CFPreferencesCopyAppValue(NULL, NULL)
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ gt_cv_func_CFPreferencesCopyAppValue=yes
+else
+ gt_cv_func_CFPreferencesCopyAppValue=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFPreferencesCopyAppValue" >&5
+$as_echo "$gt_cv_func_CFPreferencesCopyAppValue" >&6; }
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes; then
+
+$as_echo "#define HAVE_CFPREFERENCESCOPYAPPVALUE 1" >>confdefs.h
+
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFLocaleCopyCurrent" >&5
+$as_echo_n "checking for CFLocaleCopyCurrent... " >&6; }
+if test "${gt_cv_func_CFLocaleCopyCurrent+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS -Wl,-framework -Wl,CoreFoundation"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <CoreFoundation/CFLocale.h>
+int
+main ()
+{
+CFLocaleCopyCurrent();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ gt_cv_func_CFLocaleCopyCurrent=yes
+else
+ gt_cv_func_CFLocaleCopyCurrent=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$gt_save_LIBS"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_cv_func_CFLocaleCopyCurrent" >&5
+$as_echo "$gt_cv_func_CFLocaleCopyCurrent" >&6; }
+ if test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+
+$as_echo "#define HAVE_CFLOCALECOPYCURRENT 1" >>confdefs.h
+
+ fi
+ INTL_MACOSX_LIBS=
+ if test $gt_cv_func_CFPreferencesCopyAppValue = yes || test $gt_cv_func_CFLocaleCopyCurrent = yes; then
+ INTL_MACOSX_LIBS="-Wl,-framework -Wl,CoreFoundation"
+ fi
+
+
+
+
+
+
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ case " $gt_needs " in
+ *" need-formatstring-macros "*) gt_api_version=3 ;;
+ *" need-ngettext "*) gt_api_version=2 ;;
+ *) gt_api_version=1 ;;
+ esac
+ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+
+
+ if test $gt_api_version -ge 3; then
+ gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+'
+ else
+ gt_revision_test_code=
+ fi
+ if test $gt_api_version -ge 2; then
+ gt_expression_test_code=' + * ngettext ("", "", 0)'
+ else
+ gt_expression_test_code=
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libc" >&5
+$as_echo_n "checking for GNU gettext in libc... " >&6; }
+if { as_var=$gt_func_gnugettext_libc; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$gt_func_gnugettext_libc=yes"
+else
+ eval "$gt_func_gnugettext_libc=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$gt_func_gnugettext_libc
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+
+
+
+
+
+ am_save_CPPFLAGS="$CPPFLAGS"
+
+ for element in $INCICONV; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for iconv" >&5
+$as_echo_n "checking for iconv... " >&6; }
+if test "${am_cv_func_iconv+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <iconv.h>
+int
+main ()
+{
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LIBS="$am_save_LIBS"
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
+$as_echo "$am_cv_func_iconv" >&6; }
+ if test "$am_cv_func_iconv" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
+$as_echo_n "checking for working iconv... " >&6; }
+if test "${am_cv_func_iconv_works+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ am_save_LIBS="$LIBS"
+ if test $am_cv_lib_iconv = yes; then
+ LIBS="$LIBS $LIBICONV"
+ fi
+ if test "$cross_compiling" = yes; then :
+ case "$host_os" in
+ aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+ *) am_cv_func_iconv_works="guessing yes" ;;
+ esac
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+#include <iconv.h>
+#include <string.h>
+int main ()
+{
+ /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+ returns. */
+ {
+ iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+ if (cd_utf8_to_88591 != (iconv_t)(-1))
+ {
+ static const char input[] = "\342\202\254"; /* EURO SIGN */
+ char buf[10];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_utf8_to_88591,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if (res == 0)
+ return 1;
+ }
+ }
+#if 0 /* This bug could be worked around by the caller. */
+ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
+ {
+ iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+ if (cd_88591_to_utf8 != (iconv_t)(-1))
+ {
+ static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+ char buf[50];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_88591_to_utf8,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if ((int)res > 0)
+ return 1;
+ }
+ }
+#endif
+ /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+ provided. */
+ if (/* Try standardized names. */
+ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+ /* Try IRIX, OSF/1 names. */
+ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+ /* Try AIX names. */
+ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+ /* Try HP-UX names. */
+ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+ return 1;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ am_cv_func_iconv_works=yes
+else
+ am_cv_func_iconv_works=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ LIBS="$am_save_LIBS"
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
+$as_echo "$am_cv_func_iconv_works" >&6; }
+ case "$am_cv_func_iconv_works" in
+ *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+ *) am_func_iconv=yes ;;
+ esac
+ else
+ am_func_iconv=no am_cv_lib_iconv=no
+ fi
+ if test "$am_func_iconv" = yes; then
+
+$as_echo "#define HAVE_ICONV 1" >>confdefs.h
+
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libiconv" >&5
+$as_echo_n "checking how to link with libiconv... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBICONV" >&5
+$as_echo "$LIBICONV" >&6; }
+ else
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+
+
+
+
+
+
+
+
+ use_additional=yes
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+
+# Check whether --with-libintl-prefix was given.
+if test "${with_libintl_prefix+set}" = set; then :
+ withval=$with_libintl_prefix;
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+
+fi
+
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ LIBINTL_PREFIX=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='intl '
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value"
+ else
+ :
+ fi
+ else
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
+ if test -n "$acl_shlibext"; then
+ shrext=".$acl_shlibext" # typically: shrext=.so
+ else
+ shrext=
+ fi
+ if test $use_additional = yes; then
+ dir="$additional_libdir"
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ if test "$acl_hardcode_direct" = yes; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
+ fi
+ if test "$acl_hardcode_minus_L" != no; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a"
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name"
+ fi
+ fi
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ LIBINTL_PREFIX="$basedir"
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INCINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ if test -n "$found_la"; then
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIBINTL; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$dep"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$acl_hardcode_libdir_separator"; then
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ else
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ for found_dir in $ltrpathdirs; do
+ LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir"
+ done
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
+$as_echo_n "checking for GNU gettext in libintl... " >&6; }
+if { as_var=$gt_func_gnugettext_libintl; eval "test \"\${$as_var+set}\" = set"; }; then :
+ $as_echo_n "(cached) " >&6
+else
+ gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$gt_func_gnugettext_libintl=yes"
+else
+ eval "$gt_func_gnugettext_libintl=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);
+int
+main ()
+{
+bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ eval "$gt_func_gnugettext_libintl=yes"
+
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"
+fi
+eval ac_res=\$$gt_func_gnugettext_libintl
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ fi
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+
+$as_echo "#define ENABLE_NLS 1" >>confdefs.h
+
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to use NLS" >&5
+$as_echo_n "checking whether to use NLS... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_NLS" >&5
+$as_echo "$USE_NLS" >&6; }
+ if test "$USE_NLS" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking where the gettext function comes from" >&5
+$as_echo_n "checking where the gettext function comes from... " >&6; }
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $gt_source" >&5
+$as_echo "$gt_source" >&6; }
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to link with libintl" >&5
+$as_echo_n "checking how to link with libintl... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIBINTL" >&5
+$as_echo "$LIBINTL" >&6; }
+
+ for element in $INCINTL; do
+ haveit=
+ for x in $CPPFLAGS; do
+
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ eval x=\"$x\"
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element"
+ fi
+ done
+
+ fi
+
+
+$as_echo "#define HAVE_GETTEXT 1" >>confdefs.h
+
+
+$as_echo "#define HAVE_DCGETTEXT 1" >>confdefs.h
+
+ fi
+
+ POSUB=po
+ fi
+
+
+
+ INTLLIBS="$LIBINTL"
+
+
+
+
+
+
+
+# Checks for header files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+for ac_header in stdlib.h locale.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+ if test "x$as_val" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+ac_fn_c_check_decl "$LINENO" "strerror_r" "ac_cv_have_decl_strerror_r" "$ac_includes_default"
+if test "x$ac_cv_have_decl_strerror_r" = x""yes; then :
+ ac_have_decl=1
+else
+ ac_have_decl=0
+fi
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DECL_STRERROR_R $ac_have_decl
+_ACEOF
+
+for ac_func in strerror_r
+do :
+ ac_fn_c_check_func "$LINENO" "strerror_r" "ac_cv_func_strerror_r"
+if test "x$ac_cv_func_strerror_r" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_STRERROR_R 1
+_ACEOF
+
+fi
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether strerror_r returns char *" >&5
+$as_echo_n "checking whether strerror_r returns char *... " >&6; }
+if test "${ac_cv_func_strerror_r_char_p+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+
+ ac_cv_func_strerror_r_char_p=no
+ if test $ac_cv_have_decl_strerror_r = yes; then
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+int
+main ()
+{
+
+ char buf[100];
+ char x = *strerror_r (0, buf, sizeof buf);
+ char *p = strerror_r (0, buf, sizeof buf);
+ return !p || x;
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_func_strerror_r_char_p=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ else
+ # strerror_r is not declared. Choose between
+ # systems that have relatively inaccessible declarations for the
+ # function. BeOS and DEC UNIX 4.0 fall in this category, but the
+ # former has a strerror_r that returns char*, while the latter
+ # has a strerror_r that returns `int'.
+ # This test should segfault on the DEC system.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$ac_includes_default
+ extern char *strerror_r ();
+int
+main ()
+{
+char buf[100];
+ char x = *strerror_r (0, buf, sizeof buf);
+ return ! isalpha (x);
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_strerror_r_char_p=yes
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+ fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strerror_r_char_p" >&5
+$as_echo "$ac_cv_func_strerror_r_char_p" >&6; }
+if test $ac_cv_func_strerror_r_char_p = yes; then
+
+$as_echo "#define STRERROR_R_CHAR_P 1" >>confdefs.h
+
+fi
+
+case "${host_os}" in
+ solaris*)
+ # All versions of Solaris from 2.4 have a thread-safe strerror().
+ # Since Solaris 10, in addition strerror_r() exists.
+ ;;
+ *)
+ ac_fn_c_check_func "$LINENO" "strerror_r" "ac_cv_func_strerror_r"
+if test "x$ac_cv_func_strerror_r" = x""yes; then :
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Without strerror_r, gpg_strerror_r might not be thread-safe" >&5
+$as_echo "$as_me: WARNING: Without strerror_r, gpg_strerror_r might not be thread-safe" >&2;}
+fi
+
+ ;;
+esac
+
+# Checks for typedefs, structures, and compiler characteristics.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if test "${ac_cv_c_const+set}" = set; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+/* FIXME: Include the comments suggested by Paul. */
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this. */
+ typedef int charset[2];
+ const charset cs;
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *pcpcc;
+ char **ppc;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ pcpcc = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++pcpcc;
+ ppc = (char**) pcpcc;
+ pcpcc = (char const *const *) ppc;
+ { /* SCO 3.2v4 cc rejects this. */
+ char *t;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ if (s) return 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; };
+ struct s *b; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ if (!foo) return 0;
+ }
+ return !cs[0] && !zero.x;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_const=yes
+else
+ ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+
+# Substitution used for gpg-error-config
+GPG_ERROR_CONFIG_LIBS="-lgpg-error"
+GPG_ERROR_CONFIG_CFLAGS=""
+GPG_ERROR_CONFIG_ISUBDIRAFTER=""
+
+
+
+ac_config_files="$ac_config_files src/gpg-error-config"
+
+
+
+# Special defines for certain platforms
+if test "$have_w32_system" = yes; then
+
+$as_echo "#define HAVE_W32_SYSTEM 1" >>confdefs.h
+
+ if test "$have_w32ce_system" = yes; then
+
+$as_echo "#define HAVE_W32CE_SYSTEM 1" >>confdefs.h
+
+ GPG_ERROR_CONFIG_ISUBDIRAFTER="gpg-extra"
+ fi
+ BUILD_TIMESTAMP=`date --iso-8601=minutes`
+ BUILD_FILEVERSION=`echo "$VERSION" | sed 's/\([0-9.]*\).*/\1./;s/\./,/g'`
+ case "$VERSION" in
+ *-svn*) BUILD_FILEVERSION="${BUILD_FILEVERSION}0,0" ;;
+ *-cvs) BUILD_FILEVERSION="${BUILD_FILEVERSION}0,0" ;;
+ *-rc*) BUILD_FILEVERSION="${BUILD_FILEVERSION}0,1" ;;
+ *) BUILD_FILEVERSION="${BUILD_FILEVERSION}0,2" ;;
+ esac
+fi
+
+
+ if test "$have_w32_system" = yes; then
+ HAVE_W32_SYSTEM_TRUE=
+ HAVE_W32_SYSTEM_FALSE='#'
+else
+ HAVE_W32_SYSTEM_TRUE='#'
+ HAVE_W32_SYSTEM_FALSE=
+fi
+
+ if test "$have_w32ce_system" = yes; then
+ HAVE_W32CE_SYSTEM_TRUE=
+ HAVE_W32CE_SYSTEM_FALSE='#'
+else
+ HAVE_W32CE_SYSTEM_TRUE='#'
+ HAVE_W32CE_SYSTEM_FALSE=
+fi
+
+
+
+# Check whether --enable-languages was given.
+if test "${enable_languages+set}" = set; then :
+ enableval=$enable_languages;
+fi
+
+ if test "x$enable_languages" != xno; then
+ LANGUAGES_SOME_TRUE=
+ LANGUAGES_SOME_FALSE='#'
+else
+ LANGUAGES_SOME_TRUE='#'
+ LANGUAGES_SOME_FALSE=
+fi
+
+
+
+# Substitution
+ac_config_files="$ac_config_files Makefile"
+
+ac_config_files="$ac_config_files po/Makefile.in m4/Makefile"
+
+ac_config_files="$ac_config_files src/Makefile tests/Makefile"
+
+ac_config_files="$ac_config_files lang/Makefile lang/cl/Makefile lang/cl/gpg-error.asd"
+
+ac_config_files="$ac_config_files src/versioninfo.rc"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ test "x$cache_file" != "x/dev/null" &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ cat confcache >$cache_file
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_W32_SYSTEM_TRUE}" && test -z "${HAVE_W32_SYSTEM_FALSE}"; then
+ as_fn_error "conditional \"HAVE_W32_SYSTEM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_W32CE_SYSTEM_TRUE}" && test -z "${HAVE_W32CE_SYSTEM_FALSE}"; then
+ as_fn_error "conditional \"HAVE_W32CE_SYSTEM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${LANGUAGES_SOME_TRUE}" && test -z "${LANGUAGES_SOME_FALSE}"; then
+ as_fn_error "conditional \"LANGUAGES_SOME\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$?; test $as_status -eq 0 && as_status=1
+ if test "$3"; then
+ as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+ fi
+ $as_echo "$as_me: error: $1" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -p'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -p'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -p'
+ fi
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+if test -x / >/dev/null 2>&1; then
+ as_test_x='test -x'
+else
+ if ls -dL / >/dev/null 2>&1; then
+ as_ls_L_option=L
+ else
+ as_ls_L_option=
+ fi
+ as_test_x='
+ eval sh -c '\''
+ if test -d "$1"; then
+ test -d "$1/.";
+ else
+ case $1 in #(
+ -*)set "./$1";;
+ esac;
+ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+ ???[sx]*):;;*)false;;esac;fi
+ '\'' sh
+ '
+fi
+as_executable_p=$as_test_x
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by libgpg-error $as_me 1.10, which was
+generated by GNU Autoconf 2.64. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-gnupg@gnupg.org>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_version="\\
+libgpg-error config.status 1.10
+configured by $0, generated by GNU Autoconf 2.64,
+ with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2009 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+LD_RC='`$ECHO "X$LD_RC" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds_RC='`$ECHO "X$old_archive_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_RC='`$ECHO "X$compiler_RC" | $Xsed -e "$delay_single_quote_subst"`'
+GCC_RC='`$ECHO "X$GCC_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_RC='`$ECHO "X$lt_prog_compiler_no_builtin_flag_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_RC='`$ECHO "X$lt_prog_compiler_wl_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_RC='`$ECHO "X$lt_prog_compiler_pic_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static_RC='`$ECHO "X$lt_prog_compiler_static_RC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_RC='`$ECHO "X$lt_cv_prog_compiler_c_o_RC" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc_RC='`$ECHO "X$archive_cmds_need_lc_RC" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_RC='`$ECHO "X$enable_shared_with_static_runtimes_RC" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_RC='`$ECHO "X$export_dynamic_flag_spec_RC" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec_RC='`$ECHO "X$whole_archive_flag_spec_RC" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object_RC='`$ECHO "X$compiler_needs_object_RC" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_RC='`$ECHO "X$old_archive_from_new_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_RC='`$ECHO "X$old_archive_from_expsyms_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_RC='`$ECHO "X$archive_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds_RC='`$ECHO "X$archive_expsym_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds_RC='`$ECHO "X$module_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds_RC='`$ECHO "X$module_expsym_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld_RC='`$ECHO "X$with_gnu_ld_RC" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag_RC='`$ECHO "X$allow_undefined_flag_RC" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag_RC='`$ECHO "X$no_undefined_flag_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_RC='`$ECHO "X$hardcode_libdir_flag_spec_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld_RC='`$ECHO "X$hardcode_libdir_flag_spec_ld_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator_RC='`$ECHO "X$hardcode_libdir_separator_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_RC='`$ECHO "X$hardcode_direct_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute_RC='`$ECHO "X$hardcode_direct_absolute_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L_RC='`$ECHO "X$hardcode_minus_L_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_RC='`$ECHO "X$hardcode_shlibpath_var_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic_RC='`$ECHO "X$hardcode_automatic_RC" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath_RC='`$ECHO "X$inherit_rpath_RC" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs_RC='`$ECHO "X$link_all_deplibs_RC" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path_RC='`$ECHO "X$fix_srcfile_path_RC" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols_RC='`$ECHO "X$always_export_symbols_RC" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds_RC='`$ECHO "X$export_symbols_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms_RC='`$ECHO "X$exclude_expsyms_RC" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms_RC='`$ECHO "X$include_expsyms_RC" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds_RC='`$ECHO "X$prelink_cmds_RC" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec_RC='`$ECHO "X$file_list_spec_RC" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action_RC='`$ECHO "X$hardcode_action_RC" | $Xsed -e "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+AR \
+AR_FLAGS \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_wl \
+lt_prog_compiler_pic \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+fix_srcfile_path \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+finish_eval \
+old_striplib \
+striplib \
+LD_RC \
+compiler_RC \
+lt_prog_compiler_no_builtin_flag_RC \
+lt_prog_compiler_wl_RC \
+lt_prog_compiler_pic_RC \
+lt_prog_compiler_static_RC \
+lt_cv_prog_compiler_c_o_RC \
+export_dynamic_flag_spec_RC \
+whole_archive_flag_spec_RC \
+compiler_needs_object_RC \
+with_gnu_ld_RC \
+allow_undefined_flag_RC \
+no_undefined_flag_RC \
+hardcode_libdir_flag_spec_RC \
+hardcode_libdir_flag_spec_ld_RC \
+hardcode_libdir_separator_RC \
+fix_srcfile_path_RC \
+exclude_expsyms_RC \
+include_expsyms_RC \
+file_list_spec_RC; do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+old_archive_cmds_RC \
+old_archive_from_new_cmds_RC \
+old_archive_from_expsyms_cmds_RC \
+archive_cmds_RC \
+archive_expsym_cmds_RC \
+module_cmds_RC \
+module_expsym_cmds_RC \
+export_symbols_cmds_RC \
+prelink_cmds_RC; do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+ ;;
+esac
+
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+
+
+# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake < 1.5.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+ "po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
+ "src/gpg-error-config") CONFIG_FILES="$CONFIG_FILES src/gpg-error-config" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "po/Makefile.in") CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
+ "m4/Makefile") CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
+ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+ "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
+ "lang/Makefile") CONFIG_FILES="$CONFIG_FILES lang/Makefile" ;;
+ "lang/cl/Makefile") CONFIG_FILES="$CONFIG_FILES lang/cl/Makefile" ;;
+ "lang/cl/gpg-error.asd") CONFIG_FILES="$CONFIG_FILES lang/cl/gpg-error.asd" ;;
+ "src/versioninfo.rc") CONFIG_FILES="$CONFIG_FILES src/versioninfo.rc" ;;
+
+ *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp=
+ trap 'exit_status=$?
+ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+ || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[ ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_t"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$tmp/stdin" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined." >&2;}
+
+ rm -f "$tmp/stdin"
+ case $ac_file in
+ -) cat "$tmp/out" && rm -f "$tmp/out";;
+ *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+ } >"$tmp/config.h" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$tmp/config.h" "$ac_file" \
+ || as_fn_error "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files
+# are listed without --file. Let's play safe and only enable the eval
+# if we detect the quoting.
+case $CONFIG_FILES in
+*\'*) eval set x "$CONFIG_FILES" ;;
+*) set x $CONFIG_FILES ;;
+esac
+shift
+for mf
+do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # Grep'ing the whole file is not good either: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+ dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir=$dirpart/$fdir; as_fn_mkdir_p
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+ ;;
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags="RC "
+
+# ### BEGIN LIBTOOL CONFIG
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Assembler program.
+AS=$AS
+
+# DLL creation program.
+DLLTOOL=$DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$OBJDUMP
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method == "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ case $xsi_shell in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=${1%%=*}
+ func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=$(( $* ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=${#1}
+}
+
+_LT_EOF
+ ;;
+ *) # Bourne compatible functions.
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+ esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[^=]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "$@"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$1+=\$2"
+}
+_LT_EOF
+ ;;
+ *)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$1=\$$1\$2"
+}
+
+_LT_EOF
+ ;;
+ esac
+
+
+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+
+ cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: RC
+
+# The linker used to build libraries.
+LD=$lt_LD_RC
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_RC
+
+# A language specific compiler.
+CC=$lt_compiler_RC
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_RC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_RC
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_RC
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_RC
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_RC
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_RC
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_RC
+archive_expsym_cmds=$lt_archive_expsym_cmds_RC
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_RC
+module_expsym_cmds=$lt_module_expsym_cmds_RC
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_RC
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_RC
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_RC
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
+
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking. This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_RC
+
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_RC
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_RC
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_RC
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_RC
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_RC
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path_RC
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_RC
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_RC
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_RC
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_RC
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_RC
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_RC
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_RC
+
+# ### END LIBTOOL TAG CONFIG: RC
+_LT_EOF
+
+ ;;
+ "po-directories":C)
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done ;;
+ "src/gpg-error-config":F) chmod +x src/gpg-error-config ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit $?
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
+
+echo "
+ Libgpg-error v${VERSION} has been configured as follows:
+
+ Platform: $host
+
+"
diff --git a/libgpg-error-1.10/configure.ac b/libgpg-error-1.10/configure.ac
new file mode 100644
index 0000000..e4315c8
--- /dev/null
+++ b/libgpg-error-1.10/configure.ac
@@ -0,0 +1,189 @@
+# configure.ac for libgpg-error
+# Copyright (C) 2003, 2004, 2006, 2010 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+
+# (Process this file with autoconf to produce a configure script.)
+# The following lines are used by ./autogen.sh.
+AC_PREREQ(2.59)
+min_automake_version="1.9.6"
+
+# Remember to change the version number immediately *after* a release.
+# Set my_issvn to "yes" for non-released code. Remember to run an
+# "svn up" and "autogen.sh" right before creating a distribution.
+m4_define([my_version], [1.10])
+m4_define([my_issvn], [no])
+
+m4_define([svn_revision], m4_esyscmd([printf "%d" $(svn info 2>/dev/null \
+ | sed -n '/^Revision:/ s/[^0-9]//gp'|head -1)]))
+AC_INIT([libgpg-error],
+ [my_version[]m4_if(my_issvn,[yes],[-svn[]svn_revision])],
+ [bug-gnupg@gnupg.org])
+# LT Version numbers, remember to change them just *before* a release.
+# (Code changed: REVISION++)
+# (Interfaces added/removed/changed: CURRENT++, REVISION=0)
+# (Interfaces added: AGE++)
+# (Interfaces removed: AGE=0)
+# Note that added error codes don't constitute an interface change.
+LIBGPG_ERROR_LT_CURRENT=8
+LIBGPG_ERROR_LT_AGE=8
+LIBGPG_ERROR_LT_REVISION=0
+AC_SUBST(LIBGPG_ERROR_LT_CURRENT)
+AC_SUBST(LIBGPG_ERROR_LT_AGE)
+AC_SUBST(LIBGPG_ERROR_LT_REVISION)
+
+AM_INIT_AUTOMAKE
+AM_MAINTAINER_MODE
+AC_CONFIG_SRCDIR([src/err-sources.h.in])
+AC_CONFIG_HEADER([config.h])
+AC_CONFIG_MACRO_DIR([m4])
+
+# We need to know about the host architecture to avoid spurious
+# warnings.
+AC_CANONICAL_HOST
+AB_INIT
+
+# Checks for programs.
+AC_PROG_CC
+AM_PROG_CC_C_O
+AC_PROG_CPP
+AC_PROG_AWK
+AC_CHECK_TOOL(AR, ar, :)
+AC_GNU_SOURCE
+
+LT_PREREQ([2.2.6])
+LT_INIT([win32-dll disable-static])
+LT_LANG([Windows Resource])
+
+
+# We need to compile and run a program on the build machine.
+dnl The AC_PROG_CC_FOR_BUILD macro in the AC archive is broken for
+dnl autoconf 2.57.
+dnl AC_PROG_CC_FOR_BUILD
+AC_MSG_CHECKING(for cc for build)
+if test "$cross_compiling" = "yes"; then
+ CC_FOR_BUILD="${CC_FOR_BUILD-cc}"
+else
+ CC_FOR_BUILD="${CC_FOR_BUILD-$CC}"
+fi
+AC_MSG_RESULT($CC_FOR_BUILD)
+AC_ARG_VAR(CC_FOR_BUILD,[build system C compiler])
+
+
+# Set some internal variables depending on the platform for later use.
+have_w32_system=no
+have_w32ce_system=no
+case "${host}" in
+ *-mingw32ce*)
+ have_w32_system=yes
+ have_w32ce_system=yes
+ ;;
+ *-mingw32*)
+ have_w32_system=yes
+ ;;
+ *)
+ ;;
+esac
+
+
+AH_BOTTOM([
+/* Force using of NLS for W32 even if no libintl has been found. This is
+ okay because we have our own gettext implementation for W32. */
+#if defined(HAVE_W32_SYSTEM) && !defined(ENABLE_NLS)
+#define ENABLE_NLS 1
+#endif
+/* For building we need to define these macro. */
+#define GPG_ERR_ENABLE_GETTEXT_MACROS 1
+#define GPG_ERR_ENABLE_ERRNO_MACROS 1
+])
+
+
+# Note, that autogen.sh greps for the next line.
+AM_GNU_GETTEXT_VERSION([0.17])
+AM_GNU_GETTEXT([external])
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS([stdlib.h locale.h])
+AC_FUNC_STRERROR_R
+case "${host_os}" in
+ solaris*)
+ # All versions of Solaris from 2.4 have a thread-safe strerror().
+ # Since Solaris 10, in addition strerror_r() exists.
+ ;;
+ *)
+ AC_CHECK_FUNC([strerror_r], [],
+AC_MSG_WARN([[Without strerror_r, gpg_strerror_r might not be thread-safe]]))
+ ;;
+esac
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+
+# Substitution used for gpg-error-config
+GPG_ERROR_CONFIG_LIBS="-lgpg-error"
+GPG_ERROR_CONFIG_CFLAGS=""
+GPG_ERROR_CONFIG_ISUBDIRAFTER=""
+AC_SUBST(GPG_ERROR_CONFIG_LIBS)
+AC_SUBST(GPG_ERROR_CONFIG_CFLAGS)
+AC_SUBST(GPG_ERROR_CONFIG_ISUBDIRAFTER)
+AC_CONFIG_FILES([src/gpg-error-config], [chmod +x src/gpg-error-config])
+
+
+# Special defines for certain platforms
+if test "$have_w32_system" = yes; then
+ AC_DEFINE(HAVE_W32_SYSTEM,1,[Defined if we run on a W32 API based system])
+ if test "$have_w32ce_system" = yes; then
+ AC_DEFINE(HAVE_W32CE_SYSTEM,1,[Defined if we run on WindowsCE])
+ GPG_ERROR_CONFIG_ISUBDIRAFTER="gpg-extra"
+ fi
+ BUILD_TIMESTAMP=`date --iso-8601=minutes`
+ changequote(,)dnl
+ BUILD_FILEVERSION=`echo "$VERSION" | sed 's/\([0-9.]*\).*/\1./;s/\./,/g'`
+ changequote([,])dnl
+ case "$VERSION" in
+ *-svn*) BUILD_FILEVERSION="${BUILD_FILEVERSION}0,0" ;;
+ *-cvs) BUILD_FILEVERSION="${BUILD_FILEVERSION}0,0" ;;
+ *-rc*) BUILD_FILEVERSION="${BUILD_FILEVERSION}0,1" ;;
+ *) BUILD_FILEVERSION="${BUILD_FILEVERSION}0,2" ;;
+ esac
+fi
+AC_SUBST(BUILD_TIMESTAMP)
+AC_SUBST(BUILD_FILEVERSION)
+AM_CONDITIONAL(HAVE_W32_SYSTEM, test "$have_w32_system" = yes)
+AM_CONDITIONAL(HAVE_W32CE_SYSTEM, test "$have_w32ce_system" = yes)
+
+
+AC_ARG_ENABLE(languages,
+[ --disable-languages do not build support for other languages than C])
+AM_CONDITIONAL([LANGUAGES_SOME], [test "x$enable_languages" != xno])
+
+
+# Substitution
+AC_CONFIG_FILES([Makefile])
+AC_CONFIG_FILES([po/Makefile.in m4/Makefile])
+AC_CONFIG_FILES([src/Makefile tests/Makefile])
+AC_CONFIG_FILES([lang/Makefile lang/cl/Makefile lang/cl/gpg-error.asd])
+AC_CONFIG_FILES([src/versioninfo.rc])
+
+AC_OUTPUT
+
+echo "
+ Libgpg-error v${VERSION} has been configured as follows:
+
+ Platform: $host
+
+"
diff --git a/libgpg-error-1.10/depcomp b/libgpg-error-1.10/depcomp
new file mode 100755
index 0000000..04701da
--- /dev/null
+++ b/libgpg-error-1.10/depcomp
@@ -0,0 +1,530 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2005-07-09.11
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try \`$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by `PROGRAMS ARGS'.
+ object Object file output by `PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputing dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'. On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like `#:fec' to the end of the
+ # dependency line.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+ tr '
+' ' ' >> $depfile
+ echo >> $depfile
+
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' '
+' < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> $depfile
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts `$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+ tmpdepfile="$stripped.u"
+ if test "$libtool" = yes; then
+ "$@" -Wc,-M
+ else
+ "$@" -M
+ fi
+ stat=$?
+
+ if test -f "$tmpdepfile"; then :
+ else
+ stripped=`echo "$stripped" | sed 's,^.*/,,'`
+ tmpdepfile="$stripped.u"
+ fi
+
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+
+ if test -f "$tmpdepfile"; then
+ outname="$stripped.o"
+ # Each line is of the form `foo.o: dependent.h'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+ else
+ # The sourcefile does not contain any dependencies, so just
+ # store a dummy comment line, to avoid errors with the Makefile
+ # "include basename.Plo" scheme.
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+icc)
+ # Intel's C compiler understands `-MD -MF file'. However on
+ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+ # ICC 7.0 will fill foo.d with something like
+ # foo.o: sub/foo.c
+ # foo.o: sub/foo.h
+ # which is wrong. We want:
+ # sub/foo.o: sub/foo.c
+ # sub/foo.o: sub/foo.h
+ # sub/foo.c:
+ # sub/foo.h:
+ # ICC 7.1 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using \ :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+ sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in `foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+ test "x$dir" = "x$object" && dir=
+ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+ if test "$libtool" = yes; then
+ # With Tru64 cc, shared objects can also be used to make a
+ # static library. This mecanism is used in libtool 1.4 series to
+ # handle both shared and static libraries in a single compilation.
+ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+ #
+ # With libtool 1.5 this exception was removed, and libtool now
+ # generates 2 separate objects for the 2 libraries. These two
+ # compilations output dependencies in in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
+ tmpdepfile2=$dir$base.o.d # libtool 1.5
+ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
+ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.o.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ tmpdepfile4=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+ # That's a tab and a space in the [].
+ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+ else
+ echo "#dummy" > "$depfile"
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for `:'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+ "$@" $dashmflag |
+ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no
+ for arg in "$@"; do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix="`echo $object | sed 's/^.*\././'`"
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test $1 != '--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove `-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E |
+ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+ sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o,
+ # because we must use -o when running libtool.
+ "$@" || exit $?
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile"
+ echo " " >> "$depfile"
+ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/libgpg-error-1.10/install-sh b/libgpg-error-1.10/install-sh
new file mode 100755
index 0000000..a5897de
--- /dev/null
+++ b/libgpg-error-1.10/install-sh
@@ -0,0 +1,519 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2006-12-25.00
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dst_arg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dst=$dstdir/`basename "$src"`
+ dstdir_status=0
+ else
+ # Prefer dirname, but fall back on a substitute if dirname fails.
+ dstdir=`
+ (dirname "$dst") 2>/dev/null ||
+ expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$dst" : 'X\(//\)[^/]' \| \
+ X"$dst" : 'X\(//\)$' \| \
+ X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+ echo X"$dst" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'
+ `
+
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+ trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ if (umask $mkdir_umask &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writeable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ ls_ld_tmpdir=`ls -ld "$tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/d" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ -*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ eval "$initialize_posix_glob"
+
+ oIFS=$IFS
+ IFS=/
+ $posix_glob set -f
+ set fnord $dstdir
+ shift
+ $posix_glob set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test -z "$d" && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+
+ eval "$initialize_posix_glob" &&
+ $posix_glob set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ $posix_glob set +f &&
+
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/libgpg-error-1.10/lang/Makefile.am b/libgpg-error-1.10/lang/Makefile.am
new file mode 100644
index 0000000..3e380d5
--- /dev/null
+++ b/libgpg-error-1.10/lang/Makefile.am
@@ -0,0 +1,22 @@
+# Makefile.am for libgpg-error.
+# Copyright (C) 2003, 2006 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+SUBDIRS = cl
+
+EXTRA_DIST = README
diff --git a/libgpg-error-1.10/lang/Makefile.in b/libgpg-error-1.10/lang/Makefile.in
new file mode 100644
index 0000000..b020c0f
--- /dev/null
+++ b/libgpg-error-1.10/lang/Makefile.in
@@ -0,0 +1,541 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am for libgpg-error.
+# Copyright (C) 2003, 2006 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = lang
+DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
+ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
+ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-dvi-recursive install-exec-recursive \
+ install-html-recursive install-info-recursive \
+ install-pdf-recursive install-ps-recursive install-recursive \
+ installcheck-recursive installdirs-recursive pdf-recursive \
+ ps-recursive uninstall-recursive
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
+ distclean-recursive maintainer-clean-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_FILEVERSION = @BUILD_FILEVERSION@
+BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GPG_ERROR_CONFIG_CFLAGS = @GPG_ERROR_CONFIG_CFLAGS@
+GPG_ERROR_CONFIG_ISUBDIRAFTER = @GPG_ERROR_CONFIG_ISUBDIRAFTER@
+GPG_ERROR_CONFIG_LIBS = @GPG_ERROR_CONFIG_LIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBGPG_ERROR_LT_AGE = @LIBGPG_ERROR_LT_AGE@
+LIBGPG_ERROR_LT_CURRENT = @LIBGPG_ERROR_LT_CURRENT@
+LIBGPG_ERROR_LT_REVISION = @LIBGPG_ERROR_LT_REVISION@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+SUBDIRS = cl
+EXTRA_DIST = README
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lang/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu lang/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(MKDIR_P) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ am__remove_distdir=: \
+ am__skip_length_check=: \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-recursive
+
+install-exec-am:
+
+install-html: install-html-recursive
+
+install-info: install-info-recursive
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-ps: install-ps-recursive
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+ install-strip
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+ all all-am check check-am clean clean-generic clean-libtool \
+ ctags ctags-recursive distclean distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+ uninstall uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libgpg-error-1.10/lang/README b/libgpg-error-1.10/lang/README
new file mode 100644
index 0000000..2d13e21
--- /dev/null
+++ b/libgpg-error-1.10/lang/README
@@ -0,0 +1,8 @@
+Language Support for libgpg-error
+---------------------------------
+
+This directory contains support for other languages than C.
+
+Directory Language
+
+cl Common Lisp
diff --git a/libgpg-error-1.10/lang/cl/Makefile.am b/libgpg-error-1.10/lang/cl/Makefile.am
new file mode 100644
index 0000000..0535fee
--- /dev/null
+++ b/libgpg-error-1.10/lang/cl/Makefile.am
@@ -0,0 +1,40 @@
+# Makefile.am for libgpg-error.
+# Copyright (C) 2003, 2006 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+distributed_clfiles = gpg-error.asd \
+ gpg-error-package.lisp gpg-error.lisp
+
+generated_clfiles = gpg-error-codes.lisp
+
+clfiles = $(distributed_clfiles) $(generated_clfiles)
+
+# FIXME: Should be configurable.
+clfilesdir = $(datadir)/common-lisp/source/gpg-error
+dist_clfiles_DATA = $(distributed_clfiles)
+nodist_clfiles_DATA = $(generated_clfiles)
+
+EXTRA_DIST = README mkerrcodes.awk
+CLEANFILES = gpg-error-codes.lisp
+
+codes_file = $(top_srcdir)/src/err-codes.h.in
+errno_file = $(top_srcdir)/src/errnos.in
+
+gpg-error-codes.lisp: Makefile mkerrcodes.awk $(codes_file) $(errno_file)
+ echo '@errnos@' | cat $(codes_file) - $(errno_file) \
+ | $(AWK) -f $(srcdir)/mkerrcodes.awk >$@
diff --git a/libgpg-error-1.10/lang/cl/Makefile.in b/libgpg-error-1.10/lang/cl/Makefile.in
new file mode 100644
index 0000000..aa7b5eb
--- /dev/null
+++ b/libgpg-error-1.10/lang/cl/Makefile.in
@@ -0,0 +1,453 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am for libgpg-error.
+# Copyright (C) 2003, 2006 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = lang/cl
+DIST_COMMON = README $(dist_clfiles_DATA) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/gpg-error.asd.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
+ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
+ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = gpg-error.asd
+SOURCES =
+DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(clfilesdir)" "$(DESTDIR)$(clfilesdir)"
+dist_clfilesDATA_INSTALL = $(INSTALL_DATA)
+nodist_clfilesDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(dist_clfiles_DATA) $(nodist_clfiles_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_FILEVERSION = @BUILD_FILEVERSION@
+BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GPG_ERROR_CONFIG_CFLAGS = @GPG_ERROR_CONFIG_CFLAGS@
+GPG_ERROR_CONFIG_ISUBDIRAFTER = @GPG_ERROR_CONFIG_ISUBDIRAFTER@
+GPG_ERROR_CONFIG_LIBS = @GPG_ERROR_CONFIG_LIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBGPG_ERROR_LT_AGE = @LIBGPG_ERROR_LT_AGE@
+LIBGPG_ERROR_LT_CURRENT = @LIBGPG_ERROR_LT_CURRENT@
+LIBGPG_ERROR_LT_REVISION = @LIBGPG_ERROR_LT_REVISION@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+distributed_clfiles = gpg-error.asd \
+ gpg-error-package.lisp gpg-error.lisp
+
+generated_clfiles = gpg-error-codes.lisp
+clfiles = $(distributed_clfiles) $(generated_clfiles)
+
+# FIXME: Should be configurable.
+clfilesdir = $(datadir)/common-lisp/source/gpg-error
+dist_clfiles_DATA = $(distributed_clfiles)
+nodist_clfiles_DATA = $(generated_clfiles)
+EXTRA_DIST = README mkerrcodes.awk
+CLEANFILES = gpg-error-codes.lisp
+codes_file = $(top_srcdir)/src/err-codes.h.in
+errno_file = $(top_srcdir)/src/errnos.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lang/cl/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu lang/cl/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+gpg-error.asd: $(top_builddir)/config.status $(srcdir)/gpg-error.asd.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-dist_clfilesDATA: $(dist_clfiles_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(clfilesdir)" || $(MKDIR_P) "$(DESTDIR)$(clfilesdir)"
+ @list='$(dist_clfiles_DATA)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(dist_clfilesDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(clfilesdir)/$$f'"; \
+ $(dist_clfilesDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(clfilesdir)/$$f"; \
+ done
+
+uninstall-dist_clfilesDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(dist_clfiles_DATA)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(clfilesdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(clfilesdir)/$$f"; \
+ done
+install-nodist_clfilesDATA: $(nodist_clfiles_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(clfilesdir)" || $(MKDIR_P) "$(DESTDIR)$(clfilesdir)"
+ @list='$(nodist_clfiles_DATA)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(nodist_clfilesDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(clfilesdir)/$$f'"; \
+ $(nodist_clfilesDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(clfilesdir)/$$f"; \
+ done
+
+uninstall-nodist_clfilesDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(nodist_clfiles_DATA)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(clfilesdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(clfilesdir)/$$f"; \
+ done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+ for dir in "$(DESTDIR)$(clfilesdir)" "$(DESTDIR)$(clfilesdir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-dist_clfilesDATA install-nodist_clfilesDATA
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-dist_clfilesDATA uninstall-nodist_clfilesDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ distclean distclean-generic distclean-libtool distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dist_clfilesDATA \
+ install-dvi install-dvi-am install-exec install-exec-am \
+ install-html install-html-am install-info install-info-am \
+ install-man install-nodist_clfilesDATA install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+ uninstall-dist_clfilesDATA uninstall-nodist_clfilesDATA
+
+
+gpg-error-codes.lisp: Makefile mkerrcodes.awk $(codes_file) $(errno_file)
+ echo '@errnos@' | cat $(codes_file) - $(errno_file) \
+ | $(AWK) -f $(srcdir)/mkerrcodes.awk >$@
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libgpg-error-1.10/lang/cl/README b/libgpg-error-1.10/lang/cl/README
new file mode 100644
index 0000000..660508b
--- /dev/null
+++ b/libgpg-error-1.10/lang/cl/README
@@ -0,0 +1,22 @@
+Common Lisp Support for libgpg-error
+------------------------------------
+
+Requirements:
+
+ASDF Packaging Support
+CFFI Foreign Function Interface
+
+Use with:
+
+> (asdf:operate 'asdf:load-op ':gpg-error)
+> (use-package :gpg-error)
+
+
+TODO
+----
+
+* We probably should define a condition base class. Currently, we do
+ this in the user code only (eg in GPGME).
+
+* Some lispy convenience functions as need arises, for example for
+ output.
diff --git a/libgpg-error-1.10/lang/cl/gpg-error-package.lisp b/libgpg-error-1.10/lang/cl/gpg-error-package.lisp
new file mode 100644
index 0000000..73adca0
--- /dev/null
+++ b/libgpg-error-1.10/lang/cl/gpg-error-package.lisp
@@ -0,0 +1,64 @@
+;;;; libgpg-error-package.lisp
+
+;;; Copyright (C) 2006 g10 Code GmbH
+;;;
+;;; This file is part of libgpg-error.
+;;;
+;;; libgpg-error is free software; you can redistribute it and/or
+;;; modify it under the terms of the GNU Lesser General Public License
+;;; as published by the Free Software Foundation; either version 2.1 of
+;;; the License, or (at your option) any later version.
+;;;
+;;; libgpg-error is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+;;; Lesser General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU Lesser General Public
+;;; License along with libgpg-error; if not, write to the Free
+;;; Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+;;; 02111-1307, USA.
+
+;;; Conventions
+;;;
+;;; Error sources and codes are represented as keywords like
+;;; :gpg-err-source-gpg and :gpg-err-unknown-packet.
+;;;
+;;; Errors are represented as lists '(SOURCE CODE). Other
+;;; representations are also accepted in some places.
+;;;
+;;; The following functions are defined which are not defined in the C API:
+;;; gpg-err-source-as-key, gpg-err-source-as-value
+;;; gpg-err-code-as-key, gpg-err-code-as-value
+;;; gpg-err-canonicalize, gpg-err-as-value
+;;; Conversion between keywords and values for error sources and codes.
+;;;
+;;; The following functions from the C API are omitted:
+;;; gpg-strerror-r
+;;;
+;;; The following features work slightly differently:
+;;; *gpg-err-source-default* is a dynamic variable that can be set to
+;;; change the default for gpg-error.
+
+(defpackage #:gpg-error
+ (:use #:common-lisp #:cffi)
+
+ (:export :gpg-err-code-as-key
+ :gpg-err-code-as-value
+ :gpg-err-source-as-key
+ :gpg-err-source-as-value
+ :gpg-err-canonicalize
+ :gpg-err-as-value
+ :gpg-err-make
+ :*gpg-err-source-default*
+ :gpg-error
+ :gpg-err-code
+ :gpg-err-source
+ :gpg-strerror
+ :gpg-strsource
+ :gpg-err-code-from-errno
+ :gpg-err-code-to-errno
+ :gpg-err-code-from-syserror
+ :gpg-err-make-from-errno
+ :gpg-error-from-errno
+ :gpg-error-from-syserror))
diff --git a/libgpg-error-1.10/lang/cl/gpg-error.asd b/libgpg-error-1.10/lang/cl/gpg-error.asd
new file mode 100644
index 0000000..57dc67d
--- /dev/null
+++ b/libgpg-error-1.10/lang/cl/gpg-error.asd
@@ -0,0 +1,36 @@
+;;; -*- Mode: lisp -*-
+
+;;; Copyright (C) 2006 g10 Code GmbH
+;;;
+;;; This file is part of libgpg-error.
+;;;
+;;; libgpg-error is free software; you can redistribute it and/or
+;;; modify it under the terms of the GNU Lesser General Public License
+;;; as published by the Free Software Foundation; either version 2.1 of
+;;; the License, or (at your option) any later version.
+;;;
+;;; libgpg-error is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+;;; Lesser General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU Lesser General Public
+;;; License along with libgpg-error; if not, write to the Free
+;;; Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+;;; 02111-1307, USA.
+
+(defpackage #:gpg-error-system
+ (:use #:common-lisp #:asdf))
+
+(in-package #:gpg-error-system)
+
+(defsystem gpg-error
+ :description "Common error values for all GnuPG components."
+ :author "g10 Code GmbH"
+ :version "1.10"
+ :licence "LGPL"
+ :depends-on ("cffi")
+ :components ((:file "gpg-error-package")
+ (:file "gpg-error-codes"
+ :depends-on ("gpg-error-package"))
+ (:file "gpg-error" :depends-on ("gpg-error-codes"))))
diff --git a/libgpg-error-1.10/lang/cl/gpg-error.asd.in b/libgpg-error-1.10/lang/cl/gpg-error.asd.in
new file mode 100644
index 0000000..3cb7e96
--- /dev/null
+++ b/libgpg-error-1.10/lang/cl/gpg-error.asd.in
@@ -0,0 +1,36 @@
+;;; -*- Mode: lisp -*-
+
+;;; Copyright (C) 2006 g10 Code GmbH
+;;;
+;;; This file is part of libgpg-error.
+;;;
+;;; libgpg-error is free software; you can redistribute it and/or
+;;; modify it under the terms of the GNU Lesser General Public License
+;;; as published by the Free Software Foundation; either version 2.1 of
+;;; the License, or (at your option) any later version.
+;;;
+;;; libgpg-error is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+;;; Lesser General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU Lesser General Public
+;;; License along with libgpg-error; if not, write to the Free
+;;; Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+;;; 02111-1307, USA.
+
+(defpackage #:gpg-error-system
+ (:use #:common-lisp #:asdf))
+
+(in-package #:gpg-error-system)
+
+(defsystem gpg-error
+ :description "Common error values for all GnuPG components."
+ :author "g10 Code GmbH"
+ :version "@VERSION@"
+ :licence "LGPL"
+ :depends-on ("cffi")
+ :components ((:file "gpg-error-package")
+ (:file "gpg-error-codes"
+ :depends-on ("gpg-error-package"))
+ (:file "gpg-error" :depends-on ("gpg-error-codes"))))
diff --git a/libgpg-error-1.10/lang/cl/gpg-error.lisp b/libgpg-error-1.10/lang/cl/gpg-error.lisp
new file mode 100644
index 0000000..cad2532
--- /dev/null
+++ b/libgpg-error-1.10/lang/cl/gpg-error.lisp
@@ -0,0 +1,233 @@
+;;;; libgpg-error.lisp
+
+;;; Copyright (C) 2006 g10 Code GmbH
+;;;
+;;; This file is part of libgpg-error.
+;;;
+;;; libgpg-error is free software; you can redistribute it and/or
+;;; modify it under the terms of the GNU Lesser General Public License
+;;; as published by the Free Software Foundation; either version 2.1 of
+;;; the License, or (at your option) any later version.
+;;;
+;;; libgpg-error is distributed in the hope that it will be useful, but
+;;; WITHOUT ANY WARRANTY; without even the implied warranty of
+;;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+;;; Lesser General Public License for more details.
+;;;
+;;; You should have received a copy of the GNU Lesser General Public
+;;; License along with libgpg-error; if not, write to the Free
+;;; Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+;;; 02111-1307, USA.
+
+;;; Set up the library.
+
+(in-package :gpg-error)
+
+(define-foreign-library libgpg-error
+ (:unix "libgpg-error.so")
+ (t (:default "libgpg-error")))
+
+(use-foreign-library libgpg-error)
+
+;;; System dependencies.
+
+(defctype size-t :unsigned-int "The system size_t type.")
+
+;;; Error sources.
+
+(defcenum gpg-err-source-t
+ "The GPG error source type."
+ (:gpg-err-source-unknown 0)
+ (:gpg-err-source-gcrypt 1)
+ (:gpg-err-source-gpg 2)
+ (:gpg-err-source-gpgsm 3)
+ (:gpg-err-source-gpgagent 4)
+ (:gpg-err-source-pinentry 5)
+ (:gpg-err-source-scd 6)
+ (:gpg-err-source-gpgme 7)
+ (:gpg-err-source-keybox 8)
+ (:gpg-err-source-ksba 9)
+ (:gpg-err-source-dirmngr 10)
+ (:gpg-err-source-gsti 11)
+ (:gpg-err-source-any 31)
+ (:gpg-err-source-user-1 32)
+ (:gpg-err-source-user-2 33)
+ (:gpg-err-source-user-3 34)
+ (:gpg-err-source-user-4 35))
+
+(defconstant +gpg-err-source-dim+ 256)
+
+;;; The error code type gpg-err-code-t.
+
+;;; libgpg-error-codes.lisp is loaded by ASDF.
+
+(defctype gpg-error-t :unsigned-int "The GPG error code type.")
+
+;;; Bit mask manipulation constants.
+
+(defconstant +gpg-err-code-mask+ (- +gpg-err-code-dim+ 1))
+
+(defconstant +gpg-err-source-mask+ (- +gpg-err-source-dim+ 1))
+(defconstant +gpg-err-source-shift+ 24)
+
+;;; Constructor and accessor functions.
+
+;;; If we had in-library versions of our static inlines, we wouldn't
+;;; need to replicate them here. Oh well.
+
+(defun c-gpg-err-make (source code)
+ "Construct an error value from an error code and source.
+ Within a subsystem, use gpg-error instead."
+ (logior
+ (ash (logand source +gpg-err-source-mask+)
+ +gpg-err-source-shift+)
+ (logand code +gpg-err-code-mask+)))
+
+(defun c-gpg-err-code (err)
+ "retrieve the error code from an error value."
+ (logand err +gpg-err-code-mask+))
+
+(defun c-gpg-err-source (err)
+ "retrieve the error source from an error value."
+ (logand (ash err (- +gpg-err-source-shift+))
+ +gpg-err-source-mask+))
+
+;;; String functions.
+
+(defcfun ("gpg_strerror" c-gpg-strerror) :string
+ (err gpg-error-t))
+
+(defcfun ("gpg_strsource" c-gpg-strsource) :string
+ (err gpg-error-t))
+
+;;; Mapping of system errors (errno).
+
+(defcfun ("gpg_err_code_from_errno" c-gpg-err-code-from-errno) gpg-err-code-t
+ (err :int))
+
+(defcfun ("gpg_err_code_to_errno" c-gpg-err-code-to-errno) :int
+ (code gpg-err-code-t))
+
+(defcfun ("gpg_err_code_from_syserror"
+ c-gpg-err-code-from-syserror) gpg-err-code-t)
+
+;;; Self-documenting convenience functions.
+
+;;; See below.
+
+;;;
+;;;
+;;; Lispy interface.
+;;;
+;;;
+
+;;; Low-level support functions.
+
+(defun gpg-err-code-as-value (code-key)
+ (foreign-enum-value 'gpg-err-code-t code-key))
+
+(defun gpg-err-code-as-key (code)
+ (foreign-enum-keyword 'gpg-err-code-t code))
+
+(defun gpg-err-source-as-value (source-key)
+ (foreign-enum-value 'gpg-err-source-t source-key))
+
+(defun gpg-err-source-as-key (source)
+ (foreign-enum-keyword 'gpg-err-source-t source))
+
+(defun gpg-err-canonicalize (err)
+ "Canonicalize the error value err."
+ (gpg-err-make (gpg-err-source err) (gpg-err-code err)))
+
+(defun gpg-err-as-value (err)
+ "Get the integer representation of the error value ERR."
+ (let ((error (gpg-err-canonicalize err)))
+ (c-gpg-err-make (gpg-err-source-as-value (gpg-err-source error))
+ (gpg-err-code-as-value (gpg-err-code error)))))
+
+;;; Constructor and accessor functions.
+
+(defun gpg-err-make (source code)
+ "Construct an error value from an error code and source.
+ Within a subsystem, use gpg-error instead."
+ ;; As an exception to the rule, the function gpg-err-make will use
+ ;; the error source value as is when provided as integer, instead of
+ ;; parsing it as an error value.
+ (list (if (integerp source)
+ (gpg-err-source-as-key source)
+ (gpg-err-source source))
+ (gpg-err-code code)))
+
+(defvar *gpg-err-source-default* :gpg-err-source-unknown
+ "define this to specify a default source for gpg-error.")
+
+(defun gpg-error (code)
+ "Construct an error value from an error code, using the default source."
+ (gpg-err-make *gpg-err-source-default* code))
+
+(defun gpg-err-code (err)
+ "Retrieve an error code from the error value ERR."
+ (cond ((listp err) (second err))
+ ((keywordp err) err) ; FIXME
+ (t (gpg-err-code-as-key (c-gpg-err-code err)))))
+
+(defun gpg-err-source (err)
+ "Retrieve an error source from the error value ERR."
+ (cond ((listp err) (first err))
+ ((keywordp err) err) ; FIXME
+ (t (gpg-err-source-as-key (c-gpg-err-source err)))))
+
+;;; String functions.
+
+(defun gpg-strerror (err)
+ "Return a string containig a description of the error code."
+ (c-gpg-strerror (gpg-err-as-value err)))
+
+;;; FIXME: maybe we should use this as the actual implementation for
+;;; gpg-strerror.
+
+;; (defcfun ("gpg_strerror_r" c-gpg-strerror-r) :int
+;; (err gpg-error-t)
+;; (buf :string)
+;; (buflen size-t))
+
+;; (defun gpg-strerror-r (err)
+;; "Return a string containig a description of the error code."
+;; (with-foreign-pointer-as-string (errmsg 256 errmsg-size)
+;; (c-gpg-strerror-r (gpg-err-code-as-value (gpg-err-code err))
+;; errmsg errmsg-size)))
+
+(defun gpg-strsource (err)
+ "Return a string containig a description of the error source."
+ (c-gpg-strsource (gpg-err-as-value err)))
+
+;;; Mapping of system errors (errno).
+
+(defun gpg-err-code-from-errno (err)
+ "Retrieve the error code for the system error. If the system error
+ is not mapped, :gpg-err-unknown-errno is returned."
+ (gpg-err-code-as-key (c-gpg-err-code-from-errno err)))
+
+(defun gpg-err-code-to-errno (code)
+ "Retrieve the system error for the error code. If this is not a
+ system error, 0 is returned."
+ (c-gpg-err-code-to-errno (gpg-err-code code)))
+
+(defun gpg-err-code-from-syserror ()
+ "Retrieve the error code directly from the system ERRNO. If the system error
+ is not mapped, :gpg-err-unknown-errno is returned and
+ :gpg-err-missing-errno if ERRNO has the value 0."
+ (gpg-err-code-as-key (c-gpg-err-code-from-syserror)))
+
+
+;;; Self-documenting convenience functions.
+
+(defun gpg-err-make-from-errno (source err)
+ (gpg-err-make source (gpg-err-code-from-errno err)))
+
+(defun gpg-error-from-errno (err)
+ (gpg-error (gpg-err-code-from-errno err)))
+
+(defun gpg-error-from-syserror ()
+ (gpg-error (gpg-err-code-from-syserror)))
+
diff --git a/libgpg-error-1.10/lang/cl/mkerrcodes.awk b/libgpg-error-1.10/lang/cl/mkerrcodes.awk
new file mode 100644
index 0000000..ae29043
--- /dev/null
+++ b/libgpg-error-1.10/lang/cl/mkerrcodes.awk
@@ -0,0 +1,154 @@
+# mkerrcodes.awk
+# Copyright (C) 2004, 2005, 2006 g10 Code GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+#
+# As a special exception, g10 Code GmbH gives unlimited permission to
+# copy, distribute and modify the lisp source files that are the output
+# of mkerrcodes.awk. You need not follow the terms of the GNU General
+# Public License when using or distributing such scripts, even though
+# portions of the text of mkerrcodes.awk appear in them. The GNU
+# General Public License (GPL) does govern all other use of the material
+# that constitutes the mkerrcodes.awk program.
+#
+# Certain portions of the mkerrcodes.awk source text are designed to be
+# copied (in certain cases, depending on the input) into the output of
+# mkerrcodes.awk. We call these the "data" portions. The rest of the
+# mkerrcodes.awk source text consists of comments plus executable code
+# that decides which of the data portions to output in any given case.
+# We call these comments and executable code the "non-data" portions.
+# mkerrcodes.awk never copies any of the non-data portions into its output.
+#
+# This special exception to the GPL applies to versions of mkerrcodes.awk
+# released by g10 Code GmbH. When you make and distribute a modified version
+# of mkerrcodes.awk, you may extend this special exception to the GPL to
+# apply to your modified version as well, *unless* your modified version
+# has the potential to copy into its output some of the text that was the
+# non-data portion of the version that you started with. (In other words,
+# unless your change moves or copies text from the non-data portions to the
+# data portions.) If your modification has such potential, you must delete
+# any notice of this special exception to the GPL from your modified version.
+
+# The input file is in the following format:
+# [CODE SYMBOL...]
+# @errnos@
+# [CODE SYMBOL...]
+#
+# The difference between the sections is how symbol is transformed.
+# The second section gets GPG_ERR_ prepended before processing.
+#
+# Comments (starting with # and ending at the end of the line) are removed,
+# as is trailing whitespace.
+
+BEGIN {
+ FS="[ \t]+";
+ print ";;;; Output of mkerrcodes.awk. DO NOT EDIT.";
+ print "";
+ print ";;; Copyright (C) 2006 g10 Code GmbH";
+ print ";;;";
+ print ";;; This file is part of libgpg-error.";
+ print ";;;";
+ print ";;; libgpg-error is free software; you can redistribute it and/or";
+ print ";;; modify it under the terms of the GNU Lesser General Public License";
+ print ";;; as published by the Free Software Foundation; either version 2.1 of";
+ print ";;; the License, or (at your option) any later version.";
+ print ";;;";
+ print ";;; libgpg-error is distributed in the hope that it will be useful, but";
+ print ";;; WITHOUT ANY WARRANTY; without even the implied warranty of";
+ print ";;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU";
+ print ";;; Lesser General Public License for more details.";
+ print ";;;";
+ print ";;; You should have received a copy of the GNU Lesser General Public";
+ print ";;; License along with libgpg-error; if not, write to the Free";
+ print ";;; Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA";
+ print ";;; 02111-1307, USA.";
+ print "";
+
+ header = 1;
+ errnos = 0;
+}
+
+/^#/ { next; }
+
+header {
+ if (errnos)
+ {
+ if ($1 ~ /^[0123456789]+$/)
+ {
+ header = 0;
+
+ print "";
+ print " ;; The following error codes map system errors.";
+ }
+ }
+ else
+ {
+ if ($1 ~ /^[0123456789]+$/)
+ {
+ header = 0;
+
+ print "(in-package :gpg-error)";
+ print "";
+ print ";;; The error code type gpg-err-code-t.";
+ print "";
+ print ";;; This is used for system error codes.";
+ print "(defconstant +gpg-err-system-error+ (ash 1 15))";
+ print "";
+ print ";;; This is one more than the largest allowed entry.";
+ print "(defconstant +gpg-err-code-dim+ 65536)";
+ print "";
+ print ";;; A helper macro to have the keyword values evaluated.";
+ print "(defmacro defcenum-eval (type doc &rest vals)";
+ print " `(defcenum ,type ,doc";
+ print " ,@(loop for v in vals";
+ print " collect `(,(first v) ,(eval (second v))))))";
+ print "";
+ print "(defcenum-eval gpg-err-code-t";
+ print " \"The GPG error code type.\"";
+ }
+ }
+}
+
+!header {
+ sub (/\#.+/, "");
+ sub (/[ ]+$/, ""); # Strip trailing space and tab characters.
+
+ if (/^$/)
+ next;
+
+ # The following can happen for GPG_ERR_CODE_DIM.
+ if ($1 == "")
+ next;
+
+ if (/^@errnos@$/)
+ {
+ header = 1;
+ errnos = 1;
+ next;
+ }
+
+ $2 = tolower($2);
+ gsub ("_", "-", $2);
+
+ if (errnos)
+ print " (:gpg-err-" $2 " (logior +gpg-err-system-error+ " $1 "))";
+ else
+ print " (:" $2 " " $1 ")";
+}
+
+END {
+ # I am very sorry to break lisp coding style here.
+ print ")";
+}
diff --git a/libgpg-error-1.10/libgpg-error.spec b/libgpg-error-1.10/libgpg-error.spec
new file mode 100644
index 0000000..94703a0
--- /dev/null
+++ b/libgpg-error-1.10/libgpg-error.spec
@@ -0,0 +1,57 @@
+# This is a template. The dist target uses it to create the real file.
+Summary: libgpg-error
+Name: libgpg-error
+Version: 1.10
+Release: 1
+URL: ftp://ftp.gnupg.org/gcrypt/alpha/libgpg-error/
+Source: ftp://ftp.gnupg.org/gcrypt/alpha/libgpg-error/%{name}-%{version}.tar.gz
+Group: Development/Libraries
+Copyright: LGPL
+BuildRoot: %{_tmppath}/%{name}-%{version}
+BuildRequires: make
+Prereq: /sbin/ldconfig
+
+%description
+This is a library that defines common error values for all GnuPG
+components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
+pinentry, SmartCard Daemon and possibly more in the future.
+
+%prep
+%setup -q
+
+%build
+CFLAGS="$RPM_OPT_FLAGS"; export CFLAGS
+./configure --prefix=/usr
+make
+
+%install
+rm -fr $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT
+make install prefix=$RPM_BUILD_ROOT/usr
+
+%clean
+rm -fr $RPM_BUILD_ROOT
+make distclean
+
+%post
+/sbin/ldconfig
+
+%postun
+/sbin/ldconfig
+
+%files
+%defattr(-,root,root)
+%doc COPYING COPYING.LIB AUTHORS README INSTALL NEWS ChangeLog
+%attr(0755,root,root) %{_bindir}/gpg-error-config
+%attr(0755,root,root) %{_bindir}/gpg-error
+%attr(0755,root,root) %{_libdir}/*gpg-error.so*
+%attr(0755,root,root) %{_libdir}/*gpg-error.la
+%attr(0644,root,root) %{_libdir}/*gpg-error.a
+%{_includedir}/gpg-error.h
+%{_datadir}/aclocal/gpg-error.m4
+
+%changelog
+* Wed Sep 3 2003 Robert Schiele <rschiele@uni-mannheim.de>
+- initial specfile.
+
+# EOF
diff --git a/libgpg-error-1.10/libgpg-error.spec.in b/libgpg-error-1.10/libgpg-error.spec.in
new file mode 100644
index 0000000..abbf24e
--- /dev/null
+++ b/libgpg-error-1.10/libgpg-error.spec.in
@@ -0,0 +1,57 @@
+# This is a template. The dist target uses it to create the real file.
+Summary: libgpg-error
+Name: libgpg-error
+Version: @pkg_version@
+Release: 1
+URL: ftp://ftp.gnupg.org/gcrypt/alpha/libgpg-error/
+Source: ftp://ftp.gnupg.org/gcrypt/alpha/libgpg-error/%{name}-%{version}.tar.gz
+Group: Development/Libraries
+Copyright: LGPL
+BuildRoot: %{_tmppath}/%{name}-%{version}
+BuildRequires: make
+Prereq: /sbin/ldconfig
+
+%description
+This is a library that defines common error values for all GnuPG
+components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
+pinentry, SmartCard Daemon and possibly more in the future.
+
+%prep
+%setup -q
+
+%build
+CFLAGS="$RPM_OPT_FLAGS"; export CFLAGS
+./configure --prefix=/usr
+make
+
+%install
+rm -fr $RPM_BUILD_ROOT
+mkdir -p $RPM_BUILD_ROOT
+make install prefix=$RPM_BUILD_ROOT/usr
+
+%clean
+rm -fr $RPM_BUILD_ROOT
+make distclean
+
+%post
+/sbin/ldconfig
+
+%postun
+/sbin/ldconfig
+
+%files
+%defattr(-,root,root)
+%doc COPYING COPYING.LIB AUTHORS README INSTALL NEWS ChangeLog
+%attr(0755,root,root) %{_bindir}/gpg-error-config
+%attr(0755,root,root) %{_bindir}/gpg-error
+%attr(0755,root,root) %{_libdir}/*gpg-error.so*
+%attr(0755,root,root) %{_libdir}/*gpg-error.la
+%attr(0644,root,root) %{_libdir}/*gpg-error.a
+%{_includedir}/gpg-error.h
+%{_datadir}/aclocal/gpg-error.m4
+
+%changelog
+* Wed Sep 3 2003 Robert Schiele <rschiele@uni-mannheim.de>
+- initial specfile.
+
+# EOF
diff --git a/libgpg-error-1.10/ltmain.sh b/libgpg-error-1.10/ltmain.sh
new file mode 100644
index 0000000..af72ed2
--- /dev/null
+++ b/libgpg-error-1.10/ltmain.sh
@@ -0,0 +1,8412 @@
+# Generated from ltmain.m4sh.
+
+# ltmain.sh (GNU libtool) 2.2.6
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print informational messages (default)
+# --version print version information
+# -h, --help print short or long help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.2.6 Debian-2.2.6a-1ubuntu1
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION="2.2.6 Debian-2.2.6a-1ubuntu1"
+TIMESTAMP=""
+package_revision=1.3012
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# NLS nuisances: We save the old values to restore during execute mode.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+
+$lt_unset CDPATH
+
+
+
+
+
+: ${CP="cp -f"}
+: ${ECHO="echo"}
+: ${EGREP="/bin/grep -E"}
+: ${FGREP="/bin/grep -F"}
+: ${GREP="/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/bin/sed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# Generated shell functions inserted here.
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+ -*) progname=./$progname ;;
+esac
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=$func_dirname_result
+ progdir=`cd "$progdir" && pwd`
+ progpath="$progdir/$progname"
+ ;;
+ *)
+ save_IFS="$IFS"
+ IFS=:
+ for progdir in $PATH; do
+ IFS="$save_IFS"
+ test -x "$progdir/$progname" && break
+ done
+ IFS="$save_IFS"
+ test -n "$progdir" || progdir=`pwd`
+ progpath="$progdir/$progname"
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+ s/$bs4/&\\
+/g
+ s/^$bs2$dollar/$bs&/
+ s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+ s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+ $ECHO "$progname${mode+: }$mode: $*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $opt_verbose && func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+ $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+ # bash bug again:
+ :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ func_error ${1+"$@"}
+ func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information." ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ my_directory_path="$1"
+ my_dir_list=
+
+ if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+ # Protect directory names starting with `-'
+ case $my_directory_path in
+ -*) my_directory_path="./$my_directory_path" ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$my_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ my_dir_list="$my_directory_path:$my_dir_list"
+
+ # If the last portion added has no slash in it, the list is done
+ case $my_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+ done
+ my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+
+ save_mkdir_p_IFS="$IFS"; IFS=':'
+ for my_dir in $my_dir_list; do
+ IFS="$save_mkdir_p_IFS"
+ # mkdir can fail with a `File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$my_dir" 2>/dev/null || :
+ done
+ IFS="$save_mkdir_p_IFS"
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$my_directory_path" || \
+ func_fatal_error "Failed to create \`$1'"
+ fi
+}
+
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+ my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+ if test "$opt_dry_run" = ":"; then
+ # Return a directory name, but don't create it in dry-run mode
+ my_tmpdir="${my_template}-$$"
+ else
+
+ # If mktemp works, use that first and foremost
+ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$my_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+ save_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$my_tmpdir"
+ umask $save_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$my_tmpdir" || \
+ func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
+ fi
+
+ $ECHO "X$my_tmpdir" | $Xsed
+}
+
+
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
+{
+ case $1 in
+ *[\\\`\"\$]*)
+ func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+ *)
+ func_quote_for_eval_unquoted_result="$1" ;;
+ esac
+
+ case $func_quote_for_eval_unquoted_result in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and and variable
+ # expansion for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+ ;;
+ *)
+ func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
+ esac
+}
+
+
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ case $1 in
+ *[\\\`\"]*)
+ my_arg=`$ECHO "X$1" | $Xsed \
+ -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ my_arg="$1" ;;
+ esac
+
+ case $my_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ my_arg="\"$my_arg\""
+ ;;
+ esac
+
+ func_quote_for_expand_result="$my_arg"
+}
+
+
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$my_cmd"
+ my_status=$?
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ my_cmd="$1"
+ my_fail_exp="${2-:}"
+
+ ${opt_silent-false} || {
+ func_quote_for_expand "$my_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ if ${opt_dry_run-false}; then :; else
+ eval "$lt_user_locale
+ $my_cmd"
+ my_status=$?
+ eval "$lt_safe_locale"
+ if test "$my_status" -eq 0; then :; else
+ eval "(exit $my_status); $my_fail_exp"
+ fi
+ fi
+}
+
+
+
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+ s/^# //
+ s/^# *$//
+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $SED -n '/^# Usage:/,/# -h/ {
+ s/^# //
+ s/^# *$//
+ s/\$progname/'$progname'/
+ p
+ }' < "$progpath"
+ $ECHO
+ $ECHO "run \`$progname --help | more' for full usage"
+ exit $?
+}
+
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+ $SED -n '/^# Usage:/,/# Report bugs to/ {
+ s/^# //
+ s/^# *$//
+ s*\$progname*'$progname'*
+ s*\$host*'"$host"'*
+ s*\$SHELL*'"$SHELL"'*
+ s*\$LTCC*'"$LTCC"'*
+ s*\$LTCFLAGS*'"$LTCFLAGS"'*
+ s*\$LD*'"$LD"'*
+ s/\$with_gnu_ld/'"$with_gnu_ld"'/
+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+ p
+ }' < "$progpath"
+ exit $?
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ func_error "missing argument for $1"
+ exit_cmd=exit
+}
+
+exit_cmd=:
+
+
+
+
+
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell, and then maybe $ECHO will work.
+ exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit $EXIT_SUCCESS
+fi
+
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
+
+# Global variables.
+# $mode is unset
+nonopt=
+execute_dlfiles=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func_error ${1+"$@"}
+ func_error "See the $PACKAGE documentation for more information."
+ func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+ $ECHO "host: $host"
+ if test "$build_libtool_libs" = yes; then
+ $ECHO "enable shared libraries"
+ else
+ $ECHO "disable shared libraries"
+ fi
+ if test "$build_old_libs" = yes; then
+ $ECHO "enable static libraries"
+ else
+ $ECHO "disable static libraries"
+ fi
+
+ exit $?
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname="$1"
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+# Parse options once, thoroughly. This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
+{
+
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ esac
+
+ # Parse non-mode specific arguments:
+ while test "$#" -gt 0; do
+ opt="$1"
+ shift
+
+ case $opt in
+ --config) func_config ;;
+
+ --debug) preserve_args="$preserve_args $opt"
+ func_echo "enabling shell trace mode"
+ opt_debug='set -x'
+ $opt_debug
+ ;;
+
+ -dlopen) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ execute_dlfiles="$execute_dlfiles $1"
+ shift
+ ;;
+
+ --dry-run | -n) opt_dry_run=: ;;
+ --features) func_features ;;
+ --finish) mode="finish" ;;
+
+ --mode) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ case $1 in
+ # Valid mode arguments:
+ clean) ;;
+ compile) ;;
+ execute) ;;
+ finish) ;;
+ install) ;;
+ link) ;;
+ relink) ;;
+ uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+
+ mode="$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_duplicate_deps=: ;;
+
+ --quiet|--silent) preserve_args="$preserve_args $opt"
+ opt_silent=:
+ ;;
+
+ --verbose| -v) preserve_args="$preserve_args $opt"
+ opt_silent=false
+ ;;
+
+ --tag) test "$#" -eq 0 && func_missing_arg "$opt" && break
+ preserve_args="$preserve_args $opt $1"
+ func_enable_tag "$1" # tagname is set here
+ shift
+ ;;
+
+ # Separate optargs to long options:
+ -dlopen=*|--mode=*|--tag=*)
+ func_opt_split "$opt"
+ set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+ shift
+ ;;
+
+ -\?|-h) func_usage ;;
+ --help) opt_help=: ;;
+ --version) func_version ;;
+
+ -*) func_fatal_help "unrecognized option \`$opt'" ;;
+
+ *) nonopt="$opt"
+ break
+ ;;
+ esac
+ done
+
+
+ case $host in
+ *cygwin* | *mingw* | *pw32* | *cegcc*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+ ;;
+ esac
+
+ # Having warned about all mis-specified options, bail out if
+ # anything was wrong.
+ $exit_cmd $EXIT_FAILURE
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+$opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+ func_fatal_configuration "not configured to build any kind of library"
+ fi
+
+ test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$execute_dlfiles" && test "$mode" != execute; then
+ func_error "unrecognized option \`-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help="$help"
+ help="Try \`$progname --help --mode=$mode' for more information."
+}
+
+
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null \
+ | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case "$lalib_p_line" in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test "$lalib_p" = yes
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ func_lalib_p "$1"
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_ltwrapper_scriptname_result=""
+ if func_ltwrapper_executable_p "$1"; then
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ fi
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $opt_debug
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$save_ifs
+ eval cmd=\"$cmd\"
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $opt_debug
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $opt_debug
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_quote_for_eval "$arg"
+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ done
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_quote_for_eval "$arg"
+ CC_quoted="$CC_quoted $func_quote_for_eval_result"
+ done
+ case "$@ " in
+ " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with \`--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=${1}
+ if test "$build_libtool_libs" = yes; then
+ write_lobj=\'${2}\'
+ else
+ write_lobj=none
+ fi
+
+ if test "$build_old_libs" = yes; then
+ write_oldobj=\'${3}\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "${write_libobj}"
+ }
+}
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $opt_debug
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg="$arg"
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj="$arg"
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify \`-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ pie_flag="$pie_flag $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ later="$later $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs="$IFS"; IFS=','
+ for arg in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$arg"
+ lastarg="$lastarg $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ base_compile="$base_compile $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg="$srcfile"
+ srcfile="$arg"
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_quote_for_eval "$lastarg"
+ base_compile="$base_compile $func_quote_for_eval_result"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with \`-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj="$func_basename_result"
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from \`$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname="$func_basename_result"
+ xdir="$func_dirname_result"
+ lobj=${xdir}$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test "$build_old_libs" = yes; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test "$compiler_c_o" = no; then
+ output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+ lockfile="$output_obj.lock"
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test "$need_locks" = yes; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test "$need_locks" = warn; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ removelist="$removelist $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ removelist="$removelist $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ if test -n "$fix_srcfile_path"; then
+ eval srcfile=\"$fix_srcfile_path\"
+ fi
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test "$build_libtool_libs" = yes; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test "$pic_mode" != no; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ command="$command -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test "$suppress_opt" = yes; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test "$build_old_libs" = yes; then
+ if test "$pic_mode" != yes; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test "$compiler_c_o" = yes; then
+ command="$command -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ command="$command$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test "$need_locks" = warn &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test "$need_locks" != no; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to building PIC objects only
+ -prefer-non-pic try to building non-PIC objects only
+ -shared do not build a \`.o' file suitable for static linking
+ -static only build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the \`--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the \`install' or \`cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE Use a list of object files found in FILE to specify objects
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename. Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode \`$mode'"
+ ;;
+ esac
+
+ $ECHO
+ $ECHO "Try \`$progname --help' for more information about other modes."
+
+ exit $?
+}
+
+ # Now that we've collected a possible --mode arg, show help if necessary
+ $opt_help && func_mode_help
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $opt_debug
+ # The first argument is the command name.
+ cmd="$nonopt"
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $execute_dlfiles; do
+ test -f "$file" \
+ || func_fatal_help "\`$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "\`$file' was not linked with \`-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+
+ if test -f "$dir/$objdir/$dlname"; then
+ dir="$dir/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ ;;
+
+ *)
+ func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir="$absdir"
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic="$magic"
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -*) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file="$progdir/$program"
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_quote_for_eval "$file"
+ args="$args $func_quote_for_eval_result"
+ done
+
+ if test "X$opt_dry_run" = Xfalse; then
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd="\$cmd$args"
+ else
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ $ECHO "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$mode" = execute && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $opt_debug
+ libdirs="$nonopt"
+ admincmds=
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for dir
+ do
+ libdirs="$libdirs $dir"
+ done
+
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_silent && exit $EXIT_SUCCESS
+
+ $ECHO "X----------------------------------------------------------------------" | $Xsed
+ $ECHO "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ $ECHO
+ $ECHO "If you ever happen to want to link against installed libraries"
+ $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+ $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ $ECHO "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ $ECHO " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ $ECHO " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ $ECHO " - add LIBDIR to the \`$runpath_var' environment variable"
+ $ECHO " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the \`$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ $ECHO " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ fi
+ $ECHO
+
+ $ECHO "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ $ECHO "pages."
+ ;;
+ *)
+ $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ $ECHO "X----------------------------------------------------------------------" | $Xsed
+ exit $EXIT_SUCCESS
+}
+
+test "$mode" = finish && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $opt_debug
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ # Allow the use of GNU shtool's install command.
+ $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ install_prog="$install_prog$func_quote_for_eval_result"
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=no
+ stripme=
+ for arg
+ do
+ if test -n "$dest"; then
+ files="$files $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=yes ;;
+ -f)
+ case " $install_prog " in
+ *[\\\ /]cp\ *) ;;
+ *) prev=$arg ;;
+ esac
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ install_prog="$install_prog $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prev' option requires an argument"
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=yes
+ if test "$isdir" = yes; then
+ destdir="$dest"
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir="$func_dirname_result"
+ destname="$func_basename_result"
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "\`$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "\`$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ staticlibs="$staticlibs $file"
+ ;;
+
+ *.la)
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "\`$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) current_libdirs="$current_libdirs $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) future_libdirs="$future_libdirs $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir="$func_dirname_result"
+ dir="$dir$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking \`$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname="$1"
+ shift
+
+ srcname="$realname"
+ test -n "$relink_command" && srcname="$realname"T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme="$stripme"
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=""
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try `ln -sf' first, because the `ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib="$destdir/$realname"
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name="$func_basename_result"
+ instname="$dir/$name"i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest="$destfile"
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test "$build_old_libs" = yes; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile="$destdir/$destname"
+ else
+ func_basename "$file"
+ destfile="$func_basename_result"
+ destfile="$destdir/$destfile"
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=""
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=".exe"
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+ finalize=yes
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "\`$lib' has not been installed in \`$libdir'"
+ finalize=no
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test "$fast_install" = no && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if test "$finalize" = yes; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file="$func_basename_result"
+ outputname="$tmpdir/$file"
+ # Replace the output file specification.
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_silent || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink \`$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file="$outputname"
+ else
+ func_warning "cannot relink \`$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name="$func_basename_result"
+
+ # Set up the ranlib parameters.
+ oldlib="$destdir/$name"
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test "$mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $opt_debug
+ my_outputname="$1"
+ my_originator="$2"
+ my_pic_p="${3-no}"
+ my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms="${my_outputname}S.c"
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist="$output_objdir/${my_outputname}.nm"
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test "$dlself" = yes; then
+ func_verbose "generating symbol list for \`$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_verbose "extracting global C symbols from \`$progfile'"
+ $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols="$output_objdir/$outputname.exp"
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_basename "$dlprefile"
+ name="$func_basename_result"
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+ runtime relocations are performed -- see ld's documentation
+ on pseudo-relocs. */"
+ lt_dlsym_const= ;;
+ *osf5*)
+ echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+ lt_dlsym_const= ;;
+ *)
+ lt_dlsym_const=const ;;
+ esac
+
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+ { \"$my_originator\", (void *) 0 },"
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ $ECHO >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ if test "X$my_pic_p" != Xno; then
+ pic_flag_for_symtable=" $pic_flag"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) symtab_cflags="$symtab_cflags $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj="$output_objdir/${my_outputname}S.$objext"
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+ $opt_debug
+ win32_libid_type="unknown"
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+ win32_nmres=`eval $NM -f posix -A $1 |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s,.*,import,
+ p
+ q
+ }
+ }'`
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $opt_debug
+ f_ex_an_ar_dir="$1"; shift
+ f_ex_an_ar_oldlib="$1"
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $opt_debug
+ my_gentop="$1"; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=""
+ my_xlib=""
+ my_xabs=""
+ my_xdir=""
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib="$func_basename_result"
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir="$my_gentop/$my_xlib_u"
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ darwin_base_archive=`basename "$darwin_archive"`
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches ; do
+ func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+ func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+ done
+
+ func_extract_archives_result="$my_oldobjs"
+}
+
+
+
+# func_emit_wrapper_part1 [arg=no]
+#
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
+{
+ func_emit_wrapper_part1_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part1_arg1=$1
+ fi
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ ECHO=\"$qecho\"
+ file=\"\$0\"
+ # Make sure echo works.
+ if test \"X\$1\" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+ # Yippee, \$ECHO works!
+ :
+ else
+ # Restart under the correct shell, and then maybe \$ECHO will work.
+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+ fi
+ fi\
+"
+ $ECHO "\
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+ done
+"
+}
+# end: func_emit_wrapper_part1
+
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+ func_emit_wrapper_part2_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_part2_arg1=$1
+ fi
+
+ $ECHO "\
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test "$fast_install" = yes; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ $ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # Export our shlibpath_var if we have one.
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ # fixup the dll searchpath if we need to.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+# end: func_emit_wrapper_part2
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=no
+ if test -n "$1" ; then
+ func_emit_wrapper_arg1=$1
+ fi
+
+ # split this up so that func_emit_cwrapperexe_src
+ # can call each part independently.
+ func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+ func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
+
+
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+# $build $host
+# mingw (msys) mingw [e.g. native]
+# cygwin mingw
+# *nix + wine mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin. Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+ func_to_host_path_result="$1"
+ if test -n "$1" ; then
+ case $host in
+ *mingw* )
+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+ case $build in
+ *mingw* ) # actually, msys
+ # awkward: cmd appends spaces to result
+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+ func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ *cygwin* )
+ func_to_host_path_tmp1=`cygpath -w "$1"`
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ * )
+ # Unfortunately, winepath does not exit with a non-zero
+ # error code, so we are forced to check the contents of
+ # stdout. On the other hand, if the command is not
+ # found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both
+ # error code of zero AND non-empty stdout, which explains
+ # the odd construction:
+ func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+ func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ else
+ # Allow warning below.
+ func_to_host_path_result=""
+ fi
+ ;;
+ esac
+ if test -z "$func_to_host_path_result" ; then
+ func_error "Could not determine host path corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_path_result="$1"
+ fi
+ ;;
+ esac
+ fi
+}
+# end: func_to_host_path
+
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+# $build $host
+# mingw (msys) mingw [e.g. native]
+# cygwin mingw
+# *nix + wine mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+ func_to_host_pathlist_result="$1"
+ if test -n "$1" ; then
+ case $host in
+ *mingw* )
+ lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_to_host_pathlist_tmp2="$1"
+ # Once set for this call, this variable should not be
+ # reassigned. It is used in tha fallback case.
+ func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e 's|^:*||' -e 's|:*$||'`
+ case $build in
+ *mingw* ) # Actually, msys.
+ # Awkward: cmd appends spaces to result.
+ lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+ func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+ $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ *cygwin* )
+ func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+ $SED -e "$lt_sed_naive_backslashify"`
+ ;;
+ * )
+ # unfortunately, winepath doesn't convert pathlists
+ func_to_host_pathlist_result=""
+ func_to_host_pathlist_oldIFS=$IFS
+ IFS=:
+ for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+ IFS=$func_to_host_pathlist_oldIFS
+ if test -n "$func_to_host_pathlist_f" ; then
+ func_to_host_path "$func_to_host_pathlist_f"
+ if test -n "$func_to_host_path_result" ; then
+ if test -z "$func_to_host_pathlist_result" ; then
+ func_to_host_pathlist_result="$func_to_host_path_result"
+ else
+ func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+ fi
+ fi
+ fi
+ IFS=:
+ done
+ IFS=$func_to_host_pathlist_oldIFS
+ ;;
+ esac
+ if test -z "$func_to_host_pathlist_result" ; then
+ func_error "Could not determine the host path(s) corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This may break if $1 contains DOS-style drive
+ # specifications. The fix is not to complicate the expression
+ # below, but for the user to provide a working wine installation
+ # with winepath so that path translation in the cross-to-mingw
+ # case works properly.
+ lt_replace_pathsep_nix_to_dos="s|:|;|g"
+ func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+ $SED -e "$lt_replace_pathsep_nix_to_dos"`
+ fi
+ # Now, add the leading and trailing path separators back
+ case "$1" in
+ :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+ ;;
+ esac
+ case "$1" in
+ *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+}
+# end: func_to_host_pathlist
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+
+ Currently, it simply execs the wrapper *script* "$SHELL $output",
+ but could eventually absorb all of the scripts functionality and
+ exec $objdir/$outputname directly.
+*/
+EOF
+ cat <<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+# define setmode _setmode
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# define HAVE_SETENV
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+# define intptr_t int
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+ defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+ va_list args;
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+}
+#else
+# define LTWRAPPER_DEBUGPRINTF(args)
+#endif
+
+const char *program_name = NULL;
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+
+static const char *script_text_part1 =
+EOF
+
+ func_emit_wrapper_part1 yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ "/' -e 's/$/\\n"/'
+ echo ";"
+ cat <<EOF
+
+static const char *script_text_part2 =
+EOF
+ func_emit_wrapper_part2 yes |
+ $SED -e 's/\([\\"]\)/\\\1/g' \
+ -e 's/^/ "/' -e 's/$/\\n"/'
+ echo ";"
+
+ cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_pathlist "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_pathlist_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_pathlist "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_pathlist_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test "$fast_install" = yes; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH 5
+
+static const size_t opt_prefix_len = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+
+static const size_t env_set_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt = LTWRAPPER_OPTION_PREFIX "env-set";
+ /* argument is putenv-style "foo=bar", value of foo is set to bar */
+
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt = LTWRAPPER_OPTION_PREFIX "env-prepend";
+ /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
+
+static const size_t env_append_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt = LTWRAPPER_OPTION_PREFIX "env-append";
+ /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ intptr_t rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ LTWRAPPER_DEBUGPRINTF (("(main) argv[0] : %s\n", argv[0]));
+ LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+
+ /* very simple arg parsing; don't want to rely on getopt */
+ for (i = 1; i < argc; i++)
+ {
+ if (strcmp (argv[i], dumpscript_opt) == 0)
+ {
+EOF
+ case "$host" in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ printf ("%s", script_text_part1);
+ printf ("%s", script_text_part2);
+ return 0;
+ }
+ }
+
+ newargz = XMALLOC (char *, argc + 1);
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal ("Couldn't find %s", argv[0]);
+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+ tmp_pathspec));
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+ actual_cwrapper_path));
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+ target_name));
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+ {
+ if (argv[i][env_set_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_set_opt_len + 1;
+ lt_opt_process_env_set (p);
+ }
+ else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_set (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_set_opt);
+ continue;
+ }
+ if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+ {
+ if (argv[i][env_prepend_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_prepend_opt_len + 1;
+ lt_opt_process_env_prepend (p);
+ }
+ else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_prepend_opt);
+ continue;
+ }
+ if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+ {
+ if (argv[i][env_append_opt_len] == '=')
+ {
+ const char *p = argv[i] + env_append_opt_len + 1;
+ lt_opt_process_env_append (p);
+ }
+ else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+ {
+ lt_opt_process_env_append (argv[++i]); /* don't copy */
+ }
+ else
+ lt_fatal ("%s missing required argument", env_append_opt);
+ continue;
+ }
+ if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal ("Unrecognized option in %s namespace: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+ LTWRAPPER_DEBUGPRINTF (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+ for (i = 0; i < newargc; i++)
+ {
+ LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d] : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal ("Memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ LTWRAPPER_DEBUGPRINTF (("(check_executable) : %s\n",
+ path ? (*path ? path : "EMPTY!") : "NULL!"));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ LTWRAPPER_DEBUGPRINTF (("(make_executable) : %s\n",
+ path ? (*path ? path : "EMPTY!") : "NULL!"));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ int tmp_len;
+ char *concat_name;
+
+ LTWRAPPER_DEBUGPRINTF (("(find_executable) : %s\n",
+ wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = q - p;
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal ("getcwd failed");
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+ tmp_pathspec));
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ char *errstr = strerror (errno);
+ lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal ("Could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (strcmp (str, pat) == 0)
+ *str = '\0';
+ }
+ return str;
+}
+
+static void
+lt_error_core (int exit_status, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s: %s: ", program_name, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+ va_end (ap);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ int len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ int orig_value_len = strlen (orig_value);
+ int add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+ const char *p;
+ int len;
+ if (!arg || !*arg)
+ return 1;
+
+ p = strchr (arg, (int)'=');
+
+ if (!p)
+ return 1;
+
+ *value = xstrdup (++p);
+
+ len = strlen (arg) - strlen (*value);
+ *name = XMALLOC (char, len);
+ strncpy (*name, arg, len-1);
+ (*name)[len - 1] = '\0';
+
+ return 0;
+}
+
+void
+lt_opt_process_env_set (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+ }
+
+ lt_setenv (name, value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+ char *new_value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+ }
+
+ new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_opt_process_env_append (const char *arg)
+{
+ char *name = NULL;
+ char *value = NULL;
+ char *new_value = NULL;
+
+ if (lt_split_name_value (arg, &name, &value) != 0)
+ {
+ XFREE (name);
+ XFREE (value);
+ lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+ }
+
+ new_value = lt_extend_str (getenv (name), value, 1);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ XFREE (name);
+ XFREE (value);
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ int len = strlen (new_value);
+ while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[len-1] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ (name ? name : "<NULL>"),
+ (value ? value : "<NULL>")));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $opt_debug
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # which system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll which has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=no
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module="${wl}-single_module"
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test "$build_libtool_libs" != yes && \
+ func_fatal_configuration "can not build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg="$1"
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ dlfiles|dlprefiles)
+ if test "$preload" = no; then
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=yes
+ fi
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test "$dlself" = no; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test "$prev" = dlprefiles; then
+ dlself=yes
+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test "$prev" = dlfiles; then
+ dlfiles="$dlfiles $arg"
+ else
+ dlprefiles="$dlprefiles $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols="$arg"
+ test -f "$arg" \
+ || func_fatal_error "symbol file \`$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex="$arg"
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir="$arg"
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# moreargs="$moreargs $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file \`$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex="$arg"
+ prev=
+ continue
+ ;;
+ release)
+ release="-$arg"
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test "$prev" = rpath; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) rpath="$rpath $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) xrpath="$xrpath $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds="$arg"
+ prev=
+ continue
+ ;;
+ weak)
+ weak_libs="$weak_libs $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ compiler_flags="$compiler_flags $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ linker_flags="$linker_flags $qarg"
+ compiler_flags="$compiler_flags $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg="$arg"
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test "X$arg" = "X-export-symbols"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname '-L' '' "$arg"
+ dir=$func_stripname_result
+ if test -z "$dir"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between \`-L' and \`$1'"
+ else
+ func_fatal_error "need path for \`-L' option"
+ fi
+ fi
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of \`$dir'"
+ dir="$absdir"
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "*) ;;
+ *)
+ deplibs="$deplibs -L$dir"
+ lib_search_path="$lib_search_path $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) dllsearchpath="$dllsearchpath:$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ deplibs="$deplibs System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test "X$arg" = "X-lc" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test "X$arg" = "X-lc" && continue
+ ;;
+ esac
+ elif test "X$arg" = "X-lc_r"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ deplibs="$deplibs $arg"
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot)
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module="${wl}-multi_module"
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "\`-no-install' is ignored for $host"
+ func_warning "assuming \`-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ arg="$arg $wl$func_quote_for_eval_result"
+ compiler_flags="$compiler_flags $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs="$IFS"; IFS=','
+ for flag in $args; do
+ IFS="$save_ifs"
+ func_quote_for_eval "$flag"
+ arg="$arg $wl$func_quote_for_eval_result"
+ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+ linker_flags="$linker_flags $func_quote_for_eval_result"
+ done
+ IFS="$save_ifs"
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+ # -r[0-9][0-9]* specifies the processor on the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+ # +DA*, +DD* enable 64-bit mode on the HP compiler
+ # -q* pass through compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* pass through architecture-specific
+ # compiler args for GCC
+ # -F/path gives path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+ # @file GCC response files
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ compiler_flags="$compiler_flags $arg"
+ continue
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+
+ *.$objext)
+ # A standard object.
+ objs="$objs $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test "$pic_object" = none &&
+ test "$non_pic_object" = none; then
+ func_fatal_error "cannot find name of object for \`$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ if test "$pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ pic_object="$xdir$pic_object"
+
+ if test "$prev" = dlfiles; then
+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ dlfiles="$dlfiles $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test "$prev" = dlprefiles; then
+ # Preload the old-style object.
+ dlprefiles="$dlprefiles $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg="$pic_object"
+ fi
+
+ # Non-PIC object.
+ if test "$non_pic_object" != none; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object="$xdir$non_pic_object"
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test "$pic_object" = none ; then
+ arg="$non_pic_object"
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object="$pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir="$func_dirname_result"
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "\`$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ deplibs="$deplibs $arg"
+ old_deplibs="$old_deplibs $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ if test "$prev" = dlfiles; then
+ # This library was specified with -dlopen.
+ dlfiles="$dlfiles $arg"
+ prev=
+ elif test "$prev" = dlprefiles; then
+ # The library was specified with -dlpreopen.
+ dlprefiles="$dlprefiles $arg"
+ prev=
+ else
+ deplibs="$deplibs $arg"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg="$func_quote_for_eval_result"
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the \`$prevarg' option requires an argument"
+
+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname="$func_basename_result"
+ libobjs_save="$libobjs"
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ func_dirname "$output" "/" ""
+ output_objdir="$func_dirname_result$objdir"
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_duplicate_deps ; then
+ case "$libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ libs="$libs $deplib"
+ done
+
+ if test "$linkmode" = lib; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+ esac
+ pre_post_deps="$pre_post_deps $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=no
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test "$linkmode,$pass" = "lib,link"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs="$tmp_deplibs"
+ fi
+
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan"; then
+ libs="$deplibs"
+ deplibs=
+ fi
+ if test "$linkmode" = prog; then
+ case $pass in
+ dlopen) libs="$dlfiles" ;;
+ dlpreopen) libs="$dlprefiles" ;;
+ link)
+ libs="$deplibs %DEPLIBS%"
+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+ ;;
+ esac
+ fi
+ if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ case $lib in
+ *.la) func_source "$lib" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) deplibs="$deplibs $deplib" ;;
+ esac
+ done
+ done
+ libs="$dlprefiles"
+ fi
+ if test "$pass" = dlopen; then
+ # Collect dlpreopened libraries
+ save_deplibs="$deplibs"
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=no
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags $deplib"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test "$linkmode" != lib && test "$linkmode" != prog; then
+ func_warning "\`-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test "$linkmode" = lib; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib="$searchdir/lib${name}${search_ext}"
+ if test -f "$lib"; then
+ if test "$search_ext" = ".la"; then
+ found=yes
+ else
+ found=no
+ fi
+ break 2
+ fi
+ done
+ done
+ if test "$found" != yes; then
+ # deplib doesn't seem to be a libtool library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ else # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll="$l"
+ done
+ if test "X$ll" = "X$old_library" ; then # only static version available
+ found=no
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+ lib=$ladir/$old_library
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ fi
+ ;; # -l
+ *.ltframework)
+ if test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test "$linkmode" = lib ; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test "$pass" = conv && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ newlib_search_path="$newlib_search_path $func_stripname_result"
+ ;;
+ prog)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test "$pass" = scan; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ newlib_search_path="$newlib_search_path $func_stripname_result"
+ ;;
+ *)
+ func_warning "\`-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test "$pass" = link; then
+ func_stripname '-R' '' "$deplib"
+ dir=$func_stripname_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) xrpath="$xrpath $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la) lib="$deplib" ;;
+ *.$libext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=no
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=yes
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=yes
+ ;;
+ esac
+ if test "$valid_a_lib" != yes; then
+ $ECHO
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because the file extensions .$libext of this argument makes me believe"
+ $ECHO "*** that it is just a static archive that I should not use here."
+ else
+ $ECHO
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test "$pass" != link; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test "$pass" = conv; then
+ deplibs="$deplib $deplibs"
+ elif test "$linkmode" = prog; then
+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ newdlprefiles="$newdlprefiles $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ newdlfiles="$newdlfiles $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=yes
+ continue
+ ;;
+ esac # case $deplib
+
+ if test "$found" = yes || test -f "$lib"; then :
+ else
+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+ fi
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir="$func_dirname_result"
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test "$linkmode,$pass" = "lib,link" ||
+ test "$linkmode,$pass" = "prog,scan" ||
+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+ fi
+
+ if test "$pass" = conv; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ convenience="$convenience $ladir/$objdir/$old_library"
+ old_convenience="$old_convenience $ladir/$objdir/$old_library"
+ elif test "$linkmode" != prog && test "$linkmode" != lib; then
+ func_fatal_error "\`$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_duplicate_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ for l in $old_library $library_names; do
+ linklib="$l"
+ done
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for \`$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test "$pass" = dlopen; then
+ if test -z "$libdir"; then
+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+ fi
+ if test -z "$dlname" ||
+ test "$dlopen_support" != yes ||
+ test "$build_libtool_libs" = no; then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ dlprefiles="$dlprefiles $lib $dependency_libs"
+ else
+ newdlfiles="$newdlfiles $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir="$ladir"
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname="$func_basename_result"
+
+ # Find the relevant object directory and library name.
+ if test "X$installed" = Xyes; then
+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library \`$lib' was moved."
+ dir="$ladir"
+ absdir="$abs_ladir"
+ libdir="$abs_ladir"
+ else
+ dir="$libdir"
+ absdir="$libdir"
+ fi
+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir="$ladir"
+ absdir="$abs_ladir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ else
+ dir="$ladir/$objdir"
+ absdir="$abs_ladir/$objdir"
+ # Remove this search path later
+ notinst_path="$notinst_path $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test "$pass" = dlpreopen; then
+ if test -z "$libdir" && test "$linkmode" = prog; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ fi
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ newdlprefiles="$newdlprefiles $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ newdlprefiles="$newdlprefiles $dir/$dlname"
+ else
+ newdlprefiles="$newdlprefiles $dir/$linklib"
+ fi
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test "$linkmode" = lib; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test "$linkmode,$pass" = "prog,link"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test "$linkmode" = prog && test "$pass" != link; then
+ newlib_search_path="$newlib_search_path $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=no
+ if test "$link_all_deplibs" != no || test -z "$library_names" ||
+ test "$build_libtool_libs" = no; then
+ linkalldeplibs=yes
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ newlib_search_path="$newlib_search_path $func_stripname_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if test "$linkalldeplibs" = yes; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_duplicate_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test "$linkmode,$pass" = "prog,link"; then
+ if test -n "$library_names" &&
+ { { test "$prefer_static_libs" = no ||
+ test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ # Make sure the rpath contains only unique directories.
+ case "$temp_rpath:" in
+ *"$absdir:"*) ;;
+ *) temp_rpath="$temp_rpath$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if test "$alldeplibs" = yes &&
+ { test "$deplibs_check_method" = pass_all ||
+ { test "$build_libtool_libs" = yes &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test "$use_static_libs" = built && test "$installed" = yes; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc*)
+ # No point in relinking DLLs because paths are not encoded
+ notinst_deplibs="$notinst_deplibs $lib"
+ need_relink=no
+ ;;
+ *)
+ if test "$installed" = no; then
+ notinst_deplibs="$notinst_deplibs $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=""
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule="$dlpremoduletest"
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ $ECHO
+ if test "$linkmode" = prog; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test "$linkmode" = lib &&
+ test "$hardcode_into_libs" = yes; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) compile_rpath="$compile_rpath $absdir"
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir"
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname="$dlname"
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot="$soname"
+ func_basename "$soroot"
+ soname="$func_basename_result"
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from \`$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for \`$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test "$linkmode" = prog || test "$mode" != relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test "$hardcode_direct" = no; then
+ add="$dir/$linklib"
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+ *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we can not
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null ; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library" ; then
+ $ECHO
+ $ECHO "*** And there doesn't seem to be a static archive available"
+ $ECHO "*** The link will probably fail, sorry"
+ else
+ add="$dir/$old_library"
+ fi
+ elif test -n "$old_library"; then
+ add="$dir/$old_library"
+ fi
+ fi
+ esac
+ elif test "$hardcode_minus_L" = no; then
+ case $host in
+ *-*-sunos*) add_shlibpath="$dir" ;;
+ esac
+ add_dir="-L$dir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = no; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$dir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$dir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ add_shlibpath="$dir"
+ add="-l$name"
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test "$lib_linked" != yes; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+ esac
+ fi
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test "$hardcode_direct" != yes &&
+ test "$hardcode_minus_L" != yes &&
+ test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test "$linkmode" = prog || test "$mode" = relink; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test "$hardcode_direct" = yes &&
+ test "$hardcode_direct_absolute" = no; then
+ add="$libdir/$linklib"
+ elif test "$hardcode_minus_L" = yes; then
+ add_dir="-L$libdir"
+ add="-l$name"
+ elif test "$hardcode_shlibpath_var" = yes; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+ esac
+ add="-l$name"
+ elif test "$hardcode_automatic" = yes; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib" ; then
+ add="$inst_prefix_dir$libdir/$linklib"
+ else
+ add="$libdir/$linklib"
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir="-L$libdir"
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ add_dir="$add_dir -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add="-l$name"
+ fi
+
+ if test "$linkmode" = prog; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test "$linkmode" = prog; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test "$hardcode_direct" != unsupported; then
+ test -n "$old_library" && linklib="$old_library"
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test "$build_libtool_libs" = yes; then
+ # Not a shared library
+ if test "$deplibs_check_method" != pass_all; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ $ECHO
+ $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have."
+ if test "$module" = yes; then
+ $ECHO "*** But as you try to build a module library, libtool will still create "
+ $ECHO "*** a static module, that should work as long as the dlopening application"
+ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ $ECHO
+ $ECHO "*** However, this would only work if libtool was able to extract symbol"
+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $ECHO "*** not find such a program. So, this module is probably useless."
+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test "$linkmode" = lib; then
+ if test -n "$dependency_libs" &&
+ { test "$hardcode_into_libs" != yes ||
+ test "$build_old_libs" = yes ||
+ test "$link_static" = yes; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) xrpath="$xrpath $temp_xrpath";;
+ esac;;
+ *) temp_deplibs="$temp_deplibs $libdir";;
+ esac
+ done
+ dependency_libs="$temp_deplibs"
+ fi
+
+ newlib_search_path="$newlib_search_path $absdir"
+ # Link against this library
+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ if $opt_duplicate_deps ; then
+ case "$tmp_libs " in
+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+ esac
+ fi
+ tmp_libs="$tmp_libs $deplib"
+ done
+
+ if test "$link_all_deplibs" != no; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) path="$deplib" ;;
+ *.la)
+ func_dirname "$deplib" "" "."
+ dir="$func_dirname_result"
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of \`$dir'"
+ absdir="$dir"
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names" ; then
+ for tmp in $deplibrary_names ; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl" ; then
+ depdepl="$absdir/$objdir/$depdepl"
+ darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path="-L$absdir/$objdir"
+ ;;
+ esac
+ else
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "\`$deplib' seems to be moved"
+
+ path="-L$absdir"
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test "$pass" = link; then
+ if test "$linkmode" = "prog"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs="$newdependency_libs"
+ if test "$pass" = dlpreopen; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test "$pass" != dlopen; then
+ if test "$pass" != conv; then
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) lib_search_path="$lib_search_path $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ fi
+
+ if test "$linkmode,$pass" != "prog,link"; then
+ vars="deplibs"
+ else
+ vars="compile_deplibs finalize_deplibs"
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ ;;
+ *) tmp_libs="$tmp_libs $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs ; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=""
+ ;;
+ esac
+ if test -n "$i" ; then
+ tmp_libs="$tmp_libs $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test "$linkmode" = prog; then
+ dlfiles="$newdlfiles"
+ fi
+ if test "$linkmode" = prog || test "$linkmode" = lib; then
+ dlprefiles="$newdlprefiles"
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "\`-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs="$output"
+ objs="$objs$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form `libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test "$module" = no && \
+ func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+ if test "$need_lib_prefix" != no; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test "$deplibs_check_method" != pass_all; then
+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ else
+ $ECHO
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ libobjs="$libobjs $objs"
+ fi
+ fi
+
+ test "$dlself" != no && \
+ func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test "$#" -gt 1 && \
+ func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+ install_libdir="$1"
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test "$build_libtool_libs" = yes; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a `.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs="$IFS"; IFS=':'
+ set dummy $vinfo 0 0 0
+ shift
+ IFS="$save_ifs"
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to \`-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major="$1"
+ number_minor="$2"
+ number_revision="$3"
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # which has an extra 1 added just for fun
+ #
+ case $version_type in
+ darwin|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_revision"
+ ;;
+ freebsd-aout|freebsd-elf|sunos)
+ current="$number_major"
+ revision="$number_minor"
+ age="0"
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age="$number_minor"
+ revision="$number_minor"
+ lt_irix_increment=no
+ ;;
+ *)
+ func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+ ;;
+ esac
+ ;;
+ no)
+ current="$1"
+ revision="$2"
+ age="$3"
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT \`$current' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION \`$revision' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE \`$age' must be a nonnegative integer"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE \`$age' is greater than the current interface number \`$current'"
+ func_fatal_error "\`$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+
+ freebsd-aout)
+ major=".$current"
+ versuffix=".$current.$revision";
+ ;;
+
+ freebsd-elf)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ irix | nonstopux)
+ if test "X$lt_irix_increment" = "Xno"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring="$verstring_prefix$major.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test "$loop" -ne 0; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring_prefix$major.$iface:$verstring"
+ done
+
+ # Before this point, $major must not contain `.'.
+ major=.$major
+ versuffix="$major.$revision"
+ ;;
+
+ linux)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix="$major.$age.$revision"
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=".$current.$age.$revision"
+ verstring="$current.$age.$revision"
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test "$loop" -ne 0; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring="$verstring:${iface}.0"
+ done
+
+ # Make executables depend on our current version.
+ verstring="$verstring:${current}.0"
+ ;;
+
+ qnx)
+ major=".$current"
+ versuffix=".$current"
+ ;;
+
+ sunos)
+ major=".$current"
+ versuffix=".$current.$revision"
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 filesystems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix="-$major"
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type \`$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring="0.0"
+ ;;
+ esac
+ if test "$need_version" = no; then
+ versuffix=
+ else
+ versuffix=".0.0"
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test "$avoid_version" = yes && test "$need_version" = no; then
+ major=
+ versuffix=
+ verstring=""
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test "$allow_undefined" = yes; then
+ if test "$allow_undefined_flag" = unsupported; then
+ func_warning "undefined symbols not allowed in $host shared libraries"
+ build_libtool_libs=no
+ build_old_libs=yes
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag="$no_undefined_flag"
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" "yes"
+ libobjs="$libobjs $symfileobj"
+ test "X$libobjs" = "X " && libobjs=
+
+ if test "$mode" != relink; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+ if test "X$precious_files_regex" != "X"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ removelist="$removelist $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+ # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ temp_xrpath="$temp_xrpath -R$libdir"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles="$dlfiles"
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) dlfiles="$dlfiles $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles="$dlprefiles"
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) dlprefiles="$dlprefiles $lib" ;;
+ esac
+ done
+
+ if test "$build_libtool_libs" = yes; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ deplibs="$deplibs System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test "$build_libtool_need_lc" = "yes"; then
+ deplibs="$deplibs -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=""
+ versuffix=""
+ major=""
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ newdeplibs="$newdeplibs $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which I believe you do not have"
+ $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+ $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ newdeplibs="$newdeplibs $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ newdeplibs="$newdeplibs $i"
+ i=""
+ ;;
+ esac
+ fi
+ if test -n "$i" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ newdeplibs="$newdeplibs $i"
+ else
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+ $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ $ECHO "*** make it link in! You will probably need to install it or some"
+ $ECHO "*** library that it depends on before this library will be fully"
+ $ECHO "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ newdeplibs="$newdeplibs $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib="$potent_lib"
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib" ; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib="$potent_lib" # see symlink-check above in file_magic test
+ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ newdeplibs="$newdeplibs $a_deplib"
+ a_deplib=""
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib" ; then
+ droppeddeps=yes
+ $ECHO
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ $ECHO "*** I have the capability to make that library automatically link in when"
+ $ECHO "*** you link to this library. But I can only do this if you have a"
+ $ECHO "*** shared version of the library, which you do not appear to have"
+ $ECHO "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib" ; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ newdeplibs="$newdeplibs $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=""
+ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ for i in $predeps $postdeps ; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
+ done
+ fi
+ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' |
+ $GREP . >/dev/null; then
+ $ECHO
+ if test "X$deplibs_check_method" = "Xnone"; then
+ $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ $ECHO "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ $ECHO "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ fi
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test "$droppeddeps" = yes; then
+ if test "$module" = yes; then
+ $ECHO
+ $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ $ECHO "*** a static module, that should work as long as the dlopening"
+ $ECHO "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ $ECHO
+ $ECHO "*** However, this would only work if libtool was able to extract symbol"
+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ $ECHO "*** not find such a program. So, this module is probably useless."
+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ $ECHO "*** The inter-library dependencies that have been dropped here will be"
+ $ECHO "*** automatically added whenever a program is linked with this library"
+ $ECHO "*** or is declared to -dlopen it."
+
+ if test "$allow_undefined" = no; then
+ $ECHO
+ $ECHO "*** Since this library must not contain undefined symbols,"
+ $ECHO "*** because either the platform does not support them or"
+ $ECHO "*** it was explicitly requested with -no-undefined,"
+ $ECHO "*** libtool will only create a static version of it."
+ if test "$build_old_libs" = no; then
+ oldlibs="$output_objdir/$libname.$libext"
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ deplibs="$new_libs"
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test "$build_libtool_libs" = yes; then
+ if test "$hardcode_into_libs" = yes; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath="$finalize_rpath"
+ test "$mode" != relink && rpath="$compile_rpath$rpath"
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ dep_rpath="$dep_rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ if test -n "$hardcode_libdir_flag_spec_ld"; then
+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+ else
+ eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+ fi
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath="$finalize_shlibpath"
+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname="$1"
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname="$realname"
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib="$output_objdir/$realname"
+ linknames=
+ for link
+ do
+ linknames="$linknames $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols="$output_objdir/$libname.uexp"
+ delfiles="$delfiles $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols="$export_symbols"
+ export_symbols=
+ always_export_symbols=yes
+ fi
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ func_len " $cmd"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS="$save_ifs"
+ if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ tmp_deplibs="$tmp_deplibs $test_deplib"
+ ;;
+ esac
+ done
+ deplibs="$tmp_deplibs"
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test "$compiler_needs_object" = yes &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $convenience
+ libobjs="$libobjs $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ linker_flags="$linker_flags $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test "$mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test "X$skipped_export" != "X:" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+ output=${output_objdir}/${output_la}.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ $ECHO 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ $ECHO "$obj" >> $output
+ done
+ $ECHO ')' >> $output
+ delfiles="$delfiles $output"
+ elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+ output=${output_objdir}/${output_la}.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test "$compiler_needs_object" = yes; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ $ECHO "$obj" >> $output
+ done
+ delfiles="$delfiles $output"
+ output=$firstobj\"$file_list_spec$output\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-${k}.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test "X$objlist" = X ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test "$k" -eq 1 ; then
+ # The first file doesn't have a previous command to add.
+ eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-${k}.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-${k}.$objext
+ objlist=$obj
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ fi
+ delfiles="$delfiles $output"
+
+ else
+ output=
+ fi
+
+ if ${skipped_export-false}; then
+ func_verbose "generating symbol list for \`$libname.la'"
+ export_symbols="$output_objdir/$libname.exp"
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ fi
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS="$save_ifs"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ if ${skipped_export-false}; then
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols="$export_symbols"
+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ fi
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test "$module" = yes && test -n "$module_cmds" ; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ libobjs="$libobjs $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs="$IFS"; IFS='~'
+ for cmd in $cmds; do
+ IFS="$save_ifs"
+ eval cmd=\"$cmd\"
+ $opt_silent || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS="$save_ifs"
+
+ # Restore the uninstalled library and exit
+ if test "$mode" = relink; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test "$module" = yes || test "$export_dynamic" = yes; then
+ # On all known operating systems, these are identical.
+ dlname="$soname"
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ func_warning "\`-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "\`-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "\`-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj="$output"
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # reload_cmds runs $LD directly, so let us get rid of
+ # -Wl from whole_archive_flag_spec and hope we can get by with
+ # turning comma into space..
+ wl=
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+ else
+ gentop="$output_objdir/${obj}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # Create the old-style object.
+ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+ output="$obj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$build_libtool_libs" != yes; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ fi
+
+ if test -n "$pic_flag" || test "$pic_mode" != default; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output="$libobj"
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "\`-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "\`-release' is ignored for programs"
+
+ test "$preload" = yes \
+ && test "$dlopen_support" = unknown \
+ && test "$dlopen_self" = unknown \
+ && test "$dlopen_self_static" = unknown && \
+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test "$tagname" = CXX ; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ compile_command="$compile_command ${wl}-bind_at_load"
+ finalize_command="$finalize_command ${wl}-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ new_libs="$new_libs -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ ;;
+ *) new_libs="$new_libs $deplib" ;;
+ esac
+ done
+ compile_deplibs="$new_libs"
+
+
+ compile_command="$compile_command $compile_deplibs"
+ finalize_command="$finalize_command $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_rpath="$finalize_rpath $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) perm_rpath="$perm_rpath $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) dllsearchpath="$dllsearchpath:$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) dllsearchpath="$dllsearchpath:$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath="$rpath"
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs="$libdir"
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ rpath="$rpath $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir="$hardcode_libdirs"
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath="$rpath"
+
+ if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=yes
+ case $host in
+ *cegcc | *mingw32ce* )
+ # Disable wrappers for cegcc, we are cross compiling anyway.
+ wrappers_required=no
+ ;;
+ *cygwin* | *mingw* )
+ if test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ *)
+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ wrappers_required=no
+ fi
+ ;;
+ esac
+ if test "$wrappers_required" = no; then
+ # Replace the output file specification.
+ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ link_command="$compile_command$compile_rpath"
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.${objext}"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ fi
+
+ exit $exit_status
+ fi
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ rpath="$rpath$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test "$no_install" = yes; then
+ # We don't need to create a wrapper script.
+ link_command="$compile_var$compile_command$compile_rpath"
+ # Replace the output file specification.
+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+ exit $EXIT_SUCCESS
+ fi
+
+ if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "\`$output' will be relinked during installation"
+ else
+ if test "$fast_install" != no; then
+ link_command="$finalize_var$compile_command$finalize_rpath"
+ if test "$fast_install" = yes; then
+ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+ else
+ # fast_install is set to needless
+ relink_command=
+ fi
+ else
+ link_command="$compile_var$compile_command$compile_rpath"
+ relink_command="$finalize_var$finalize_command$finalize_rpath"
+ fi
+ fi
+
+ # Replace the output file specification.
+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Quote $ECHO for shipping.
+ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
+ case $progpath in
+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+ esac
+ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
+ else
+ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource="$output_path/$objdir/lt-$output_name.c"
+ cwrapper="$output_path/$output_name.exe"
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host" ; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ if test "$build_libtool_libs" = convenience; then
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs="$convenience"
+ build_libtool_libs=no
+ else
+ if test "$build_libtool_libs" = module; then
+ oldobjs="$libobjs_save"
+ build_libtool_libs=no
+ else
+ oldobjs="$old_deplibs $non_pic_objects"
+ if test "$preload" = yes && test -f "$symfileobj"; then
+ oldobjs="$oldobjs $symfileobj"
+ fi
+ fi
+ addlibs="$old_convenience"
+ fi
+
+ if test -n "$addlibs"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $addlibs
+ oldobjs="$oldobjs $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ oldobjs="$oldobjs $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ $ECHO "copying selected object files to avoid basename conflicts..."
+ gentop="$output_objdir/${outputname}x"
+ generated="$generated $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase="$func_basename_result"
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ oldobjs="$oldobjs $gentop/$newobj"
+ ;;
+ *) oldobjs="$oldobjs $obj" ;;
+ esac
+ done
+ fi
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj" ; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test "X$oldobjs" = "X" ; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test "$build_old_libs" = yes && old_library="$libname.$libext"
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+ if test "$hardcode_automatic" = yes ; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test "$installed" = yes; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output="$output_objdir/$outputname"i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$deplib' is not a valid libtool archive"
+ newdependency_libs="$newdependency_libs $libdir/$name"
+ ;;
+ *) newdependency_libs="$newdependency_libs $deplib" ;;
+ esac
+ done
+ dependency_libs="$newdependency_libs"
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ newdlfiles="$newdlfiles $libdir/$name"
+ ;;
+ *) newdlfiles="$newdlfiles $lib" ;;
+ esac
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name="$func_basename_result"
+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "\`$lib' is not a valid libtool archive"
+ newdlprefiles="$newdlprefiles $libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles="$newdlprefiles"
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ newdlfiles="$newdlfiles $abs"
+ done
+ dlfiles="$newdlfiles"
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ newdlprefiles="$newdlprefiles $abs"
+ done
+ dlprefiles="$newdlprefiles"
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test "$installed" = no && test "$need_relink" = yes; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+{ test "$mode" = link || test "$mode" = relink; } &&
+ func_mode_link ${1+"$@"}
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $opt_debug
+ RM="$nonopt"
+ files=
+ rmforce=
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic="$magic"
+
+ for arg
+ do
+ case $arg in
+ -f) RM="$RM $arg"; rmforce=yes ;;
+ -*) RM="$RM $arg" ;;
+ *) files="$files $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ origobjdir="$objdir"
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir="$func_dirname_result"
+ if test "X$dir" = X.; then
+ objdir="$origobjdir"
+ else
+ objdir="$dir/$origobjdir"
+ fi
+ func_basename "$file"
+ name="$func_basename_result"
+ test "$mode" = uninstall && objdir="$dir"
+
+ # Remember objdir for removal later, being careful to avoid duplicates
+ if test "$mode" = clean; then
+ case " $rmdirs " in
+ *" $objdir "*) ;;
+ *) rmdirs="$rmdirs $objdir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif test "$rmforce" = yes; then
+ continue
+ fi
+
+ rmfiles="$file"
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ rmfiles="$rmfiles $objdir/$n"
+ done
+ test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+
+ case "$mode" in
+ clean)
+ case " $library_names " in
+ # " " in the beginning catches empty $dlname
+ *" $dlname "*) ;;
+ *) rmfiles="$rmfiles $objdir/$dlname" ;;
+ esac
+ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" &&
+ test "$pic_object" != none; then
+ rmfiles="$rmfiles $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" &&
+ test "$non_pic_object" != none; then
+ rmfiles="$rmfiles $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test "$mode" = clean ; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ rmfiles="$rmfiles $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+ if test "$fast_install" = yes && test -n "$relink_command"; then
+ rmfiles="$rmfiles $objdir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name" ; then
+ rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+ objdir="$origobjdir"
+
+ # Try to remove the ${objdir}s in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
+ func_mode_uninstall ${1+"$@"}
+
+test -z "$mode" && {
+ help="$generic_help"
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode \`$mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
+# vi:sw=2
+
diff --git a/libgpg-error-1.10/m4/ChangeLog b/libgpg-error-1.10/m4/ChangeLog
new file mode 100644
index 0000000..10adb6c
--- /dev/null
+++ b/libgpg-error-1.10/m4/ChangeLog
@@ -0,0 +1,107 @@
+2010-09-16 gettextize <bug-gnu-gettext@gnu.org>
+
+ * gettext.m4: Upgrade to gettext-0.17.
+ * iconv.m4: Upgrade to gettext-0.17.
+ * lib-link.m4: Upgrade to gettext-0.17.
+ * po.m4: Upgrade to gettext-0.17.
+
+2006-11-23 gettextize <bug-gnu-gettext@gnu.org>
+
+ * gettext.m4: Upgrade to gettext-0.15.
+ * inttypes-h.m4: New file, from gettext-0.15.
+ * inttypes-pri.m4: Upgrade to gettext-0.15.
+ * lib-link.m4: Upgrade to gettext-0.15.
+ * lib-prefix.m4: Upgrade to gettext-0.15.
+ * lock.m4: New file, from gettext-0.15.
+ * longdouble.m4: Upgrade to gettext-0.15.
+ * nls.m4: Upgrade to gettext-0.15.
+ * po.m4: Upgrade to gettext-0.15.
+ * size_max.m4: Upgrade to gettext-0.15.
+ * visibility.m4: New file, from gettext-0.15.
+ * Makefile.am (EXTRA_DIST): Add the new files.
+
+2006-09-14 Werner Koch <wk@g10code.com>
+
+ * autobuild.m4: New.
+
+2006-03-14 gettextize <bug-gnu-gettext@gnu.org>
+
+ * codeset.m4: Upgrade to gettext-0.14.5.
+ * gettext.m4: Upgrade to gettext-0.14.5.
+ * glibc2.m4: New file, from gettext-0.14.5.
+ * glibc21.m4: Upgrade to gettext-0.14.5.
+ * iconv.m4: Upgrade to gettext-0.14.5.
+ * intdiv0.m4: Upgrade to gettext-0.14.5.
+ * intmax.m4: New file, from gettext-0.14.5.
+ * inttypes.m4: Upgrade to gettext-0.14.5.
+ * inttypes_h.m4: Upgrade to gettext-0.14.5.
+ * inttypes-pri.m4: Upgrade to gettext-0.14.5.
+ * isc-posix.m4: Upgrade to gettext-0.14.5.
+ * lcmessage.m4: Upgrade to gettext-0.14.5.
+ * lib-ld.m4: Upgrade to gettext-0.14.5.
+ * lib-link.m4: Upgrade to gettext-0.14.5.
+ * lib-prefix.m4: Upgrade to gettext-0.14.5.
+ * longdouble.m4: New file, from gettext-0.14.5.
+ * longlong.m4: New file, from gettext-0.14.5.
+ * nls.m4: Upgrade to gettext-0.14.5.
+ * po.m4: Upgrade to gettext-0.14.5.
+ * printf-posix.m4: New file, from gettext-0.14.5.
+ * progtest.m4: Upgrade to gettext-0.14.5.
+ * signed.m4: New file, from gettext-0.14.5.
+ * size_max.m4: New file, from gettext-0.14.5.
+ * stdint_h.m4: Upgrade to gettext-0.14.5.
+ * uintmax_t.m4: Upgrade to gettext-0.14.5.
+ * ulonglong.m4: Upgrade to gettext-0.14.5.
+ * wchar_t.m4: New file, from gettext-0.14.5.
+ * wint_t.m4: New file, from gettext-0.14.5.
+ * xsize.m4: New file, from gettext-0.14.5.
+ * Makefile.am (EXTRA_DIST): Add the new files.
+
+2005-10-02 Marcus Brinkmann <marcus@g10code.de>
+
+ * libtool.m4: Update.
+
+2004-03-01 Marcus Brinkmann <marcus@g10code.de>
+
+ * Makefile.am (EXTRA_DIST): Add ac_prog_cc_for_build.m4.
+ * ac_prog_cc_for_build.m4: New file.
+
+2003-12-08 Werner Koch <wk@gnupg.org>
+
+ * libtool.m4: Added (CVS only).
+
+2003-12-08 gettextize <bug-gnu-gettext@gnu.org>
+
+ * gettext.m4: Upgrade to gettext-0.12.1.
+ * inttypes_h.m4: Upgrade to gettext-0.12.1.
+ * lib-ld.m4: Upgrade to gettext-0.12.1.
+ * lib-link.m4: Upgrade to gettext-0.12.1.
+ * lib-prefix.m4: Upgrade to gettext-0.12.1.
+ * nls.m4: New file, from gettext-0.12.1.
+ * po.m4: New file, from gettext-0.12.1.
+ * progtest.m4: Upgrade to gettext-0.12.1.
+ * stdint_h.m4: Upgrade to gettext-0.12.1.
+ * uintmax_t.m4: Upgrade to gettext-0.12.1.
+ * Makefile.am (EXTRA_DIST): Add the new files.
+
+2003-05-15 gettextize <bug-gnu-gettext@gnu.org>
+
+ * codeset.m4: New file, from gettext-0.11.5.
+ * gettext.m4: New file, from gettext-0.11.5.
+ * glibc21.m4: New file, from gettext-0.11.5.
+ * iconv.m4: New file, from gettext-0.11.5.
+ * intdiv0.m4: New file, from gettext-0.11.5.
+ * inttypes.m4: New file, from gettext-0.11.5.
+ * inttypes_h.m4: New file, from gettext-0.11.5.
+ * inttypes-pri.m4: New file, from gettext-0.11.5.
+ * isc-posix.m4: New file, from gettext-0.11.5.
+ * lcmessage.m4: New file, from gettext-0.11.5.
+ * lib-ld.m4: New file, from gettext-0.11.5.
+ * lib-link.m4: New file, from gettext-0.11.5.
+ * lib-prefix.m4: New file, from gettext-0.11.5.
+ * progtest.m4: New file, from gettext-0.11.5.
+ * stdint_h.m4: New file, from gettext-0.11.5.
+ * uintmax_t.m4: New file, from gettext-0.11.5.
+ * ulonglong.m4: New file, from gettext-0.11.5.
+ * Makefile.am: New file.
+
diff --git a/libgpg-error-1.10/m4/Makefile.am b/libgpg-error-1.10/m4/Makefile.am
new file mode 100644
index 0000000..9c2b1e2
--- /dev/null
+++ b/libgpg-error-1.10/m4/Makefile.am
@@ -0,0 +1,3 @@
+EXTRA_DIST = inttypes-h.m4 lock.m4 visibility.m4 glibc2.m4 intmax.m4 longdouble.m4 longlong.m4 printf-posix.m4 signed.m4 size_max.m4 wchar_t.m4 wint_t.m4 xsize.m4 ac_prog_cc_for_build.m4 nls.m4 po.m4 codeset.m4 gettext.m4 glibc21.m4 iconv.m4 intdiv0.m4 inttypes.m4 inttypes_h.m4 inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 progtest.m4 stdint_h.m4 uintmax_t.m4 ulonglong.m4
+
+EXTRA_DIST += autobuild.m4
diff --git a/libgpg-error-1.10/m4/Makefile.in b/libgpg-error-1.10/m4/Makefile.in
new file mode 100644
index 0000000..7b0d171
--- /dev/null
+++ b/libgpg-error-1.10/m4/Makefile.in
@@ -0,0 +1,370 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = m4
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ChangeLog
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
+ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
+ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_FILEVERSION = @BUILD_FILEVERSION@
+BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GPG_ERROR_CONFIG_CFLAGS = @GPG_ERROR_CONFIG_CFLAGS@
+GPG_ERROR_CONFIG_ISUBDIRAFTER = @GPG_ERROR_CONFIG_ISUBDIRAFTER@
+GPG_ERROR_CONFIG_LIBS = @GPG_ERROR_CONFIG_LIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBGPG_ERROR_LT_AGE = @LIBGPG_ERROR_LT_AGE@
+LIBGPG_ERROR_LT_CURRENT = @LIBGPG_ERROR_LT_CURRENT@
+LIBGPG_ERROR_LT_REVISION = @LIBGPG_ERROR_LT_REVISION@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EXTRA_DIST = inttypes-h.m4 lock.m4 visibility.m4 glibc2.m4 intmax.m4 \
+ longdouble.m4 longlong.m4 printf-posix.m4 signed.m4 \
+ size_max.m4 wchar_t.m4 wint_t.m4 xsize.m4 \
+ ac_prog_cc_for_build.m4 nls.m4 po.m4 codeset.m4 gettext.m4 \
+ glibc21.m4 iconv.m4 intdiv0.m4 inttypes.m4 inttypes_h.m4 \
+ inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 \
+ lib-link.m4 lib-prefix.m4 progtest.m4 stdint_h.m4 uintmax_t.m4 \
+ ulonglong.m4 autobuild.m4
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu m4/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+ distclean distclean-generic distclean-libtool distdir dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-dvi install-dvi-am \
+ install-exec install-exec-am install-html install-html-am \
+ install-info install-info-am install-man install-pdf \
+ install-pdf-am install-ps install-ps-am install-strip \
+ installcheck installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libgpg-error-1.10/m4/ac_prog_cc_for_build.m4 b/libgpg-error-1.10/m4/ac_prog_cc_for_build.m4
new file mode 100644
index 0000000..42c91ce
--- /dev/null
+++ b/libgpg-error-1.10/m4/ac_prog_cc_for_build.m4
@@ -0,0 +1,149 @@
+dnl Available from the GNU Autoconf Macro Archive at:
+dnl http://www.gnu.org/software/ac-archive/htmldoc/ac_prog_cc_for_build.html
+dnl
+dnl All content of this archive is free software;
+dnl you can redistribute it and/or modify it under the terms of the GNU
+dnl General Public License as published by the Free Software Foundation;
+dnl either version 2, or (at your option) any later version.
+dnl
+dnl As a special exception, the respective Autoconf Macro's copyright
+dnl owner gives unlimited permission to copy, distribute and modify the
+dnl configure scripts that are the output of Autoconf when processing the
+dnl Macro. You need not follow the terms of the GNU General Public License
+dnl when using or distributing such scripts, even though portions of the
+dnl text of the Macro appear in them. The GNU General Public License (GPL)
+dnl does govern all other use of the material that constitutes the
+dnl Autoconf Macro.
+dnl
+dnl This special exception to the GPL applies to versions of the Autoconf
+dnl Macro released by the GNU Autoconf Macro Archive. When you make and
+dnl distribute a modified version of the Autoconf Macro, you may extend
+dnl this special exception to the GPL to apply to your modified version as
+dnl well.
+
+dnl Synopsis AC_PROG_CC_FOR_BUILD
+dnl
+dnl This macro searches for a C compiler that generates native
+dnl executables, that is a C compiler that surely is not a cross-compiler.
+dnl This can be useful if you have to generate source code at compile-time
+dnl like for example GCC does.
+dnl
+dnl The macro sets the CC_FOR_BUILD and CPP_FOR_BUILD macros to anything
+dnl needed to compile or link (CC_FOR_BUILD) and preprocess
+dnl (CPP_FOR_BUILD). The value of these variables can be overridden by
+dnl the user by specifying a compiler with an environment variable (like
+dnl you do for standard CC).
+dnl
+dnl It also sets BUILD_EXEEXT and BUILD_OBJEXT to the executable and
+dnl object file extensions for the build platform, and GCC_FOR_BUILD
+dnl to `yes' if the compiler we found is GCC. All these variables but
+dnl GCC_FOR_BUILD are substituted in the Makefile.
+dnl
+dnl Author Paolo Bonzini <bonzini@gnu.org>
+dnl
+AC_DEFUN([AC_PROG_CC_FOR_BUILD], [dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_CPP])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+AC_REQUIRE([AC_CANONICAL_SYSTEM])dnl
+dnl
+pushdef([AC_TRY_COMPILER], [
+cat > conftest.$ac_ext << EOF
+#line __oline__ "configure"
+#include "confdefs.h"
+[$1]
+EOF
+# If we can't run a trivial program, we are probably using a cross
+compiler.
+# Fail miserably.
+if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} && (./conftest;
+exit) 2>/dev/null; then
+ [$2]=yes
+else
+ echo "configure: failed program was:" >&AC_FD_CC
+ cat conftest.$ac_ext >&AC_FD_CC
+ [$2]=no
+fi
+[$3]=no
+rm -fr conftest*])dnl
+
+dnl Use the standard macros, but make them use other variable names
+dnl
+pushdef([cross_compiling], [#])dnl
+pushdef([ac_cv_prog_CPP], ac_cv_build_prog_CPP)dnl
+pushdef([ac_cv_prog_gcc], ac_cv_build_prog_gcc)dnl
+pushdef([ac_cv_prog_cc_works], ac_cv_build_prog_cc_works)dnl
+pushdef([ac_cv_prog_cc_cross], ac_cv_build_prog_cc_cross)dnl
+pushdef([ac_cv_prog_cc_g], ac_cv_build_prog_cc_g)dnl
+pushdef([ac_cv_exeext], ac_cv_build_exeext)dnl
+pushdef([ac_cv_objext], ac_cv_build_objext)dnl
+pushdef([ac_exeext], ac_build_exeext)dnl
+pushdef([ac_objext], ac_build_objext)dnl
+pushdef([CC], CC_FOR_BUILD)dnl
+pushdef([CPP], CPP_FOR_BUILD)dnl
+pushdef([CFLAGS], CFLAGS_FOR_BUILD)dnl
+pushdef([CPPFLAGS], CPPFLAGS_FOR_BUILD)dnl
+pushdef([host], build)dnl
+pushdef([host_alias], build_alias)dnl
+pushdef([host_cpu], build_cpu)dnl
+pushdef([host_vendor], build_vendor)dnl
+pushdef([host_os], build_os)dnl
+pushdef([ac_cv_host], ac_cv_build)dnl
+pushdef([ac_cv_host_alias], ac_cv_build_alias)dnl
+pushdef([ac_cv_host_cpu], ac_cv_build_cpu)dnl
+pushdef([ac_cv_host_vendor], ac_cv_build_vendor)dnl
+pushdef([ac_cv_host_os], ac_cv_build_os)dnl
+pushdef([ac_cpp], ac_build_cpp)dnl
+pushdef([ac_compile], ac_build_compile)dnl
+pushdef([ac_link], ac_build_link)dnl
+
+dnl Defeat the anti-duplication mechanism
+dnl
+dnl undefine([AC_PROVIDE_AC_PROG_CPP])dnl
+dnl undefine([AC_PROVIDE_AC_PROG_C])dnl
+dnl undefine([AC_PROVIDE_AC_EXEEXT])dnl
+
+AC_PROG_CC
+AC_PROG_CPP
+AC_EXEEXT
+
+dnl Restore the old definitions
+dnl
+popdef([AC_TRY_COMPILER])dnl
+popdef([ac_link])dnl
+popdef([ac_compile])dnl
+popdef([ac_cpp])dnl
+popdef([ac_cv_host_os])dnl
+popdef([ac_cv_host_vendor])dnl
+popdef([ac_cv_host_cpu])dnl
+popdef([ac_cv_host_alias])dnl
+popdef([ac_cv_host])dnl
+popdef([host_os])dnl
+popdef([host_vendor])dnl
+popdef([host_cpu])dnl
+popdef([host_alias])dnl
+popdef([host])dnl
+popdef([CPPFLAGS])dnl
+popdef([CFLAGS])dnl
+popdef([CPP])dnl
+popdef([CC])dnl
+popdef([ac_objext])dnl
+popdef([ac_exeext])dnl
+popdef([ac_cv_objext])dnl
+popdef([ac_cv_exeext])dnl
+popdef([ac_cv_prog_cc_g])dnl
+popdef([ac_cv_prog_cc_works])dnl
+popdef([ac_cv_prog_cc_cross])dnl
+popdef([ac_cv_prog_gcc])dnl
+popdef([ac_cv_prog_CPP])dnl
+popdef([cross_compiling])dnl
+
+dnl Finally, set Makefile variables
+dnl
+BUILD_EXEEXT=$ac_build_exeext
+BUILD_OBJEXT=$ac_build_objext
+AC_SUBST(BUILD_EXEEXT)dnl
+AC_SUBST(BUILD_OBJEXT)dnl
+AC_SUBST([CFLAGS_FOR_BUILD])dnl
+AC_SUBST([CPPFLAGS_FOR_BUILD])dnl
+])
diff --git a/libgpg-error-1.10/m4/autobuild.m4 b/libgpg-error-1.10/m4/autobuild.m4
new file mode 100644
index 0000000..bd1f4dc
--- /dev/null
+++ b/libgpg-error-1.10/m4/autobuild.m4
@@ -0,0 +1,34 @@
+# autobuild.m4 serial 2 (autobuild-3.3)
+# Copyright (C) 2004 Simon Josefsson
+#
+# This file is free software, distributed under the terms of the GNU
+# General Public License. As a special exception to the GNU General
+# Public License, this file may be distributed as part of a program
+# that contains a configuration script generated by Autoconf, under
+# the same distribution terms as the rest of that program.
+#
+# This file can can be used in projects which are not available under
+# the GNU General Public License or the GNU Library General Public
+# License but which still want to provide support for Autobuild.
+
+# Usage: AB_INIT([MODE]).
+AC_DEFUN([AB_INIT],
+[
+ AC_REQUIRE([AC_CANONICAL_BUILD])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+
+ AC_MSG_NOTICE([autobuild project... ${PACKAGE_NAME:-$PACKAGE}])
+ AC_MSG_NOTICE([autobuild revision... ${PACKAGE_VERSION:-$VERSION}])
+ hostname=`hostname`
+ if test "$hostname"; then
+ AC_MSG_NOTICE([autobuild hostname... $hostname])
+ fi
+ ifelse([$1],[],,[AC_MSG_NOTICE([autobuild mode... $1])])
+ date=`date +%Y%m%d-%H%M%S`
+ if test "$?" != 0; then
+ date=`date`
+ fi
+ if test "$date"; then
+ AC_MSG_NOTICE([autobuild timestamp... $date])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/codeset.m4 b/libgpg-error-1.10/m4/codeset.m4
new file mode 100644
index 0000000..a6e67ec
--- /dev/null
+++ b/libgpg-error-1.10/m4/codeset.m4
@@ -0,0 +1,21 @@
+# codeset.m4 serial AM1 (gettext-0.10.40)
+dnl Copyright (C) 2000-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_LANGINFO_CODESET],
+[
+ AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
+ [AC_TRY_LINK([#include <langinfo.h>],
+ [char* cs = nl_langinfo(CODESET);],
+ am_cv_langinfo_codeset=yes,
+ am_cv_langinfo_codeset=no)
+ ])
+ if test $am_cv_langinfo_codeset = yes; then
+ AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
+ [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/gettext.m4 b/libgpg-error-1.10/m4/gettext.m4
new file mode 100644
index 0000000..c9ae1f7
--- /dev/null
+++ b/libgpg-error-1.10/m4/gettext.m4
@@ -0,0 +1,381 @@
+# gettext.m4 serial 60 (gettext-0.17)
+dnl Copyright (C) 1995-2007 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2006.
+
+dnl Macro to add for using GNU gettext.
+
+dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]).
+dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The
+dnl default (if it is not specified or empty) is 'no-libtool'.
+dnl INTLSYMBOL should be 'external' for packages with no intl directory,
+dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory.
+dnl If INTLSYMBOL is 'use-libtool', then a libtool library
+dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static,
+dnl depending on --{enable,disable}-{shared,static} and on the presence of
+dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library
+dnl $(top_builddir)/intl/libintl.a will be created.
+dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
+dnl implementations (in libc or libintl) without the ngettext() function
+dnl will be ignored. If NEEDSYMBOL is specified and is
+dnl 'need-formatstring-macros', then GNU gettext implementations that don't
+dnl support the ISO C 99 <inttypes.h> formatstring macros will be ignored.
+dnl INTLDIR is used to find the intl libraries. If empty,
+dnl the value `$(top_builddir)/intl/' is used.
+dnl
+dnl The result of the configuration is one of three cases:
+dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
+dnl and used.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 2) GNU gettext has been found in the system's C library.
+dnl Catalog format: GNU --> install in $(datadir)
+dnl Catalog extension: .mo after installation, .gmo in source tree
+dnl 3) No internationalization, always use English msgid.
+dnl Catalog format: none
+dnl Catalog extension: none
+dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur.
+dnl The use of .gmo is historical (it was needed to avoid overwriting the
+dnl GNU format catalogs when building on a platform with an X/Open gettext),
+dnl but we keep it in order not to force irrelevant filename changes on the
+dnl maintainers.
+dnl
+AC_DEFUN([AM_GNU_GETTEXT],
+[
+ dnl Argument checking.
+ ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], ,
+ [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT
+])])])])])
+ ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], ,
+ [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT
+])])])])
+ define([gt_included_intl],
+ ifelse([$1], [external],
+ ifdef([AM_GNU_GETTEXT_][INTL_SUBDIR], [yes], [no]),
+ [yes]))
+ define([gt_libtool_suffix_prefix], ifelse([$1], [use-libtool], [l], []))
+ gt_NEEDS_INIT
+ AM_GNU_GETTEXT_NEED([$2])
+
+ AC_REQUIRE([AM_PO_SUBDIRS])dnl
+ ifelse(gt_included_intl, yes, [
+ AC_REQUIRE([AM_INTL_SUBDIR])dnl
+ ])
+
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ dnl Ideally we would do this search only after the
+ dnl if test "$USE_NLS" = "yes"; then
+ dnl if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+ dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT
+ dnl the configure script would need to contain the same shell code
+ dnl again, outside any 'if'. There are two solutions:
+ dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'.
+ dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE.
+ dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not
+ dnl documented, we avoid it.
+ ifelse(gt_included_intl, yes, , [
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+ ])
+
+ dnl Sometimes, on MacOS X, libintl requires linking with CoreFoundation.
+ gt_INTL_MACOSX
+
+ dnl Set USE_NLS.
+ AC_REQUIRE([AM_NLS])
+
+ ifelse(gt_included_intl, yes, [
+ BUILD_INCLUDED_LIBINTL=no
+ USE_INCLUDED_LIBINTL=no
+ ])
+ LIBINTL=
+ LTLIBINTL=
+ POSUB=
+
+ dnl Add a version number to the cache macros.
+ case " $gt_needs " in
+ *" need-formatstring-macros "*) gt_api_version=3 ;;
+ *" need-ngettext "*) gt_api_version=2 ;;
+ *) gt_api_version=1 ;;
+ esac
+ gt_func_gnugettext_libc="gt_cv_func_gnugettext${gt_api_version}_libc"
+ gt_func_gnugettext_libintl="gt_cv_func_gnugettext${gt_api_version}_libintl"
+
+ dnl If we use NLS figure out what method
+ if test "$USE_NLS" = "yes"; then
+ gt_use_preinstalled_gnugettext=no
+ ifelse(gt_included_intl, yes, [
+ AC_MSG_CHECKING([whether included gettext is requested])
+ AC_ARG_WITH(included-gettext,
+ [ --with-included-gettext use the GNU gettext library included here],
+ nls_cv_force_use_gnu_gettext=$withval,
+ nls_cv_force_use_gnu_gettext=no)
+ AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
+
+ nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
+ if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
+ ])
+ dnl User does not insist on using GNU NLS library. Figure out what
+ dnl to use. If GNU gettext is available we use this. Else we have
+ dnl to fall back to GNU NLS library.
+
+ if test $gt_api_version -ge 3; then
+ gt_revision_test_code='
+#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
+#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
+#endif
+changequote(,)dnl
+typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
+changequote([,])dnl
+'
+ else
+ gt_revision_test_code=
+ fi
+ if test $gt_api_version -ge 2; then
+ gt_expression_test_code=' + * ngettext ("", "", 0)'
+ else
+ gt_expression_test_code=
+ fi
+
+ AC_CACHE_CHECK([for GNU gettext in libc], [$gt_func_gnugettext_libc],
+ [AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern int *_nl_domain_bindings;],
+ [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_domain_bindings],
+ [eval "$gt_func_gnugettext_libc=yes"],
+ [eval "$gt_func_gnugettext_libc=no"])])
+
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" != "yes"; }; then
+ dnl Sometimes libintl requires libiconv, so first search for libiconv.
+ ifelse(gt_included_intl, yes, , [
+ AM_ICONV_LINK
+ ])
+ dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL
+ dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv])
+ dnl because that would add "-liconv" to LIBINTL and LTLIBINTL
+ dnl even if libiconv doesn't exist.
+ AC_LIB_LINKFLAGS_BODY([intl])
+ AC_CACHE_CHECK([for GNU gettext in libintl],
+ [$gt_func_gnugettext_libintl],
+ [gt_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS $INCINTL"
+ gt_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBINTL"
+ dnl Now see whether libintl exists and does not depend on libiconv.
+ AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+ [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+ [eval "$gt_func_gnugettext_libintl=yes"],
+ [eval "$gt_func_gnugettext_libintl=no"])
+ dnl Now see whether libintl exists and depends on libiconv.
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" != yes; } && test -n "$LIBICONV"; then
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <libintl.h>
+$gt_revision_test_code
+extern int _nl_msg_cat_cntr;
+extern
+#ifdef __cplusplus
+"C"
+#endif
+const char *_nl_expand_alias (const char *);],
+ [bindtextdomain ("", "");
+return * gettext ("")$gt_expression_test_code + _nl_msg_cat_cntr + *_nl_expand_alias ("")],
+ [LIBINTL="$LIBINTL $LIBICONV"
+ LTLIBINTL="$LTLIBINTL $LTLIBICONV"
+ eval "$gt_func_gnugettext_libintl=yes"
+ ])
+ fi
+ CPPFLAGS="$gt_save_CPPFLAGS"
+ LIBS="$gt_save_LIBS"])
+ fi
+
+ dnl If an already present or preinstalled GNU gettext() is found,
+ dnl use it. But if this macro is used in GNU gettext, and GNU
+ dnl gettext is already preinstalled in libintl, we update this
+ dnl libintl. (Cf. the install rule in intl/Makefile.in.)
+ if { eval "gt_val=\$$gt_func_gnugettext_libc"; test "$gt_val" = "yes"; } \
+ || { { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; } \
+ && test "$PACKAGE" != gettext-runtime \
+ && test "$PACKAGE" != gettext-tools; }; then
+ gt_use_preinstalled_gnugettext=yes
+ else
+ dnl Reset the values set by searching for libintl.
+ LIBINTL=
+ LTLIBINTL=
+ INCINTL=
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ if test "$gt_use_preinstalled_gnugettext" != "yes"; then
+ dnl GNU gettext is not found in the C library.
+ dnl Fall back on included GNU gettext library.
+ nls_cv_use_gnu_gettext=yes
+ fi
+ fi
+
+ if test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions used to generate GNU NLS library.
+ BUILD_INCLUDED_LIBINTL=yes
+ USE_INCLUDED_LIBINTL=yes
+ LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV $LIBTHREAD"
+ LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV $LTLIBTHREAD"
+ LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
+ fi
+
+ CATOBJEXT=
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Mark actions to use GNU gettext tools.
+ CATOBJEXT=.gmo
+ fi
+ ])
+
+ if test -n "$INTL_MACOSX_LIBS"; then
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ dnl Some extra flags are needed during linking.
+ LIBINTL="$LIBINTL $INTL_MACOSX_LIBS"
+ LTLIBINTL="$LTLIBINTL $INTL_MACOSX_LIBS"
+ fi
+ fi
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes" \
+ || test "$nls_cv_use_gnu_gettext" = "yes"; then
+ AC_DEFINE(ENABLE_NLS, 1,
+ [Define to 1 if translation of program messages to the user's native language
+ is requested.])
+ else
+ USE_NLS=no
+ fi
+ fi
+
+ AC_MSG_CHECKING([whether to use NLS])
+ AC_MSG_RESULT([$USE_NLS])
+ if test "$USE_NLS" = "yes"; then
+ AC_MSG_CHECKING([where the gettext function comes from])
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ gt_source="external libintl"
+ else
+ gt_source="libc"
+ fi
+ else
+ gt_source="included intl directory"
+ fi
+ AC_MSG_RESULT([$gt_source])
+ fi
+
+ if test "$USE_NLS" = "yes"; then
+
+ if test "$gt_use_preinstalled_gnugettext" = "yes"; then
+ if { eval "gt_val=\$$gt_func_gnugettext_libintl"; test "$gt_val" = "yes"; }; then
+ AC_MSG_CHECKING([how to link with libintl])
+ AC_MSG_RESULT([$LIBINTL])
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL])
+ fi
+
+ dnl For backward compatibility. Some packages may be using this.
+ AC_DEFINE(HAVE_GETTEXT, 1,
+ [Define if the GNU gettext() function is already present or preinstalled.])
+ AC_DEFINE(HAVE_DCGETTEXT, 1,
+ [Define if the GNU dcgettext() function is already present or preinstalled.])
+ fi
+
+ dnl We need to process the po/ directory.
+ POSUB=po
+ fi
+
+ ifelse(gt_included_intl, yes, [
+ dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
+ dnl to 'yes' because some of the testsuite requires it.
+ if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then
+ BUILD_INCLUDED_LIBINTL=yes
+ fi
+
+ dnl Make all variables we use known to autoconf.
+ AC_SUBST(BUILD_INCLUDED_LIBINTL)
+ AC_SUBST(USE_INCLUDED_LIBINTL)
+ AC_SUBST(CATOBJEXT)
+
+ dnl For backward compatibility. Some configure.ins may be using this.
+ nls_cv_header_intl=
+ nls_cv_header_libgt=
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ DATADIRNAME=share
+ AC_SUBST(DATADIRNAME)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INSTOBJEXT=.mo
+ AC_SUBST(INSTOBJEXT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ GENCAT=gencat
+ AC_SUBST(GENCAT)
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLOBJS=
+ if test "$USE_INCLUDED_LIBINTL" = yes; then
+ INTLOBJS="\$(GETTOBJS)"
+ fi
+ AC_SUBST(INTLOBJS)
+
+ dnl Enable libtool support if the surrounding package wishes it.
+ INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix
+ AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
+ ])
+
+ dnl For backward compatibility. Some Makefiles may be using this.
+ INTLLIBS="$LIBINTL"
+ AC_SUBST(INTLLIBS)
+
+ dnl Make all documented variables known to autoconf.
+ AC_SUBST(LIBINTL)
+ AC_SUBST(LTLIBINTL)
+ AC_SUBST(POSUB)
+])
+
+
+dnl gt_NEEDS_INIT ensures that the gt_needs variable is initialized.
+m4_define([gt_NEEDS_INIT],
+[
+ m4_divert_text([DEFAULTS], [gt_needs=])
+ m4_define([gt_NEEDS_INIT], [])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_NEED([NEEDSYMBOL])
+AC_DEFUN([AM_GNU_GETTEXT_NEED],
+[
+ m4_divert_text([INIT_PREPARE], [gt_needs="$gt_needs $1"])
+])
+
+
+dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version])
+AC_DEFUN([AM_GNU_GETTEXT_VERSION], [])
diff --git a/libgpg-error-1.10/m4/glibc2.m4 b/libgpg-error-1.10/m4/glibc2.m4
new file mode 100644
index 0000000..e8f5bfe
--- /dev/null
+++ b/libgpg-error-1.10/m4/glibc2.m4
@@ -0,0 +1,30 @@
+# glibc2.m4 serial 1
+dnl Copyright (C) 2000-2002, 2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# Test for the GNU C Library, version 2.0 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([gt_GLIBC2],
+ [
+ AC_CACHE_CHECK(whether we are using the GNU C Library 2 or newer,
+ ac_cv_gnu_library_2,
+ [AC_EGREP_CPP([Lucky GNU user],
+ [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ >= 2)
+ Lucky GNU user
+ #endif
+#endif
+ ],
+ ac_cv_gnu_library_2=yes,
+ ac_cv_gnu_library_2=no)
+ ]
+ )
+ AC_SUBST(GLIBC2)
+ GLIBC2="$ac_cv_gnu_library_2"
+ ]
+)
diff --git a/libgpg-error-1.10/m4/glibc21.m4 b/libgpg-error-1.10/m4/glibc21.m4
new file mode 100644
index 0000000..d95fd98
--- /dev/null
+++ b/libgpg-error-1.10/m4/glibc21.m4
@@ -0,0 +1,30 @@
+# glibc21.m4 serial 3
+dnl Copyright (C) 2000-2002, 2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# Test for the GNU C Library, version 2.1 or newer.
+# From Bruno Haible.
+
+AC_DEFUN([gl_GLIBC21],
+ [
+ AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
+ ac_cv_gnu_library_2_1,
+ [AC_EGREP_CPP([Lucky GNU user],
+ [
+#include <features.h>
+#ifdef __GNU_LIBRARY__
+ #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
+ Lucky GNU user
+ #endif
+#endif
+ ],
+ ac_cv_gnu_library_2_1=yes,
+ ac_cv_gnu_library_2_1=no)
+ ]
+ )
+ AC_SUBST(GLIBC21)
+ GLIBC21="$ac_cv_gnu_library_2_1"
+ ]
+)
diff --git a/libgpg-error-1.10/m4/iconv.m4 b/libgpg-error-1.10/m4/iconv.m4
new file mode 100644
index 0000000..66bc76f
--- /dev/null
+++ b/libgpg-error-1.10/m4/iconv.m4
@@ -0,0 +1,180 @@
+# iconv.m4 serial AM6 (gettext-0.17)
+dnl Copyright (C) 2000-2002, 2007 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([AM_ICONV_LINKFLAGS_BODY],
+[
+ dnl Prerequisites of AC_LIB_LINKFLAGS_BODY.
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([iconv])
+])
+
+AC_DEFUN([AM_ICONV_LINK],
+[
+ dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
+ dnl those with the standalone portable GNU libiconv installed).
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl for cross-compiles
+
+ dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV
+ dnl accordingly.
+ AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY])
+
+ dnl Add $INCICONV to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed libiconv and not disabled its use
+ dnl via --without-libiconv-prefix, he wants to use it. The first
+ dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed.
+ am_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV])
+
+ AC_CACHE_CHECK([for iconv], am_cv_func_iconv, [
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_func_iconv=yes)
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIBICONV"
+ AC_TRY_LINK([#include <stdlib.h>
+#include <iconv.h>],
+ [iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);],
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes)
+ LIBS="$am_save_LIBS"
+ fi
+ ])
+ if test "$am_cv_func_iconv" = yes; then
+ AC_CACHE_CHECK([for working iconv], am_cv_func_iconv_works, [
+ dnl This tests against bugs in AIX 5.1 and HP-UX 11.11.
+ am_save_LIBS="$LIBS"
+ if test $am_cv_lib_iconv = yes; then
+ LIBS="$LIBS $LIBICONV"
+ fi
+ AC_TRY_RUN([
+#include <iconv.h>
+#include <string.h>
+int main ()
+{
+ /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
+ returns. */
+ {
+ iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
+ if (cd_utf8_to_88591 != (iconv_t)(-1))
+ {
+ static const char input[] = "\342\202\254"; /* EURO SIGN */
+ char buf[10];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_utf8_to_88591,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if (res == 0)
+ return 1;
+ }
+ }
+#if 0 /* This bug could be worked around by the caller. */
+ /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
+ {
+ iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
+ if (cd_88591_to_utf8 != (iconv_t)(-1))
+ {
+ static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
+ char buf[50];
+ const char *inptr = input;
+ size_t inbytesleft = strlen (input);
+ char *outptr = buf;
+ size_t outbytesleft = sizeof (buf);
+ size_t res = iconv (cd_88591_to_utf8,
+ (char **) &inptr, &inbytesleft,
+ &outptr, &outbytesleft);
+ if ((int)res > 0)
+ return 1;
+ }
+ }
+#endif
+ /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
+ provided. */
+ if (/* Try standardized names. */
+ iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
+ /* Try IRIX, OSF/1 names. */
+ && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
+ /* Try AIX names. */
+ && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
+ /* Try HP-UX names. */
+ && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
+ return 1;
+ return 0;
+}], [am_cv_func_iconv_works=yes], [am_cv_func_iconv_works=no],
+ [case "$host_os" in
+ aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
+ *) am_cv_func_iconv_works="guessing yes" ;;
+ esac])
+ LIBS="$am_save_LIBS"
+ ])
+ case "$am_cv_func_iconv_works" in
+ *no) am_func_iconv=no am_cv_lib_iconv=no ;;
+ *) am_func_iconv=yes ;;
+ esac
+ else
+ am_func_iconv=no am_cv_lib_iconv=no
+ fi
+ if test "$am_func_iconv" = yes; then
+ AC_DEFINE(HAVE_ICONV, 1,
+ [Define if you have the iconv() function and it works.])
+ fi
+ if test "$am_cv_lib_iconv" = yes; then
+ AC_MSG_CHECKING([how to link with libiconv])
+ AC_MSG_RESULT([$LIBICONV])
+ else
+ dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV
+ dnl either.
+ CPPFLAGS="$am_save_CPPFLAGS"
+ LIBICONV=
+ LTLIBICONV=
+ fi
+ AC_SUBST(LIBICONV)
+ AC_SUBST(LTLIBICONV)
+])
+
+AC_DEFUN([AM_ICONV],
+[
+ AM_ICONV_LINK
+ if test "$am_cv_func_iconv" = yes; then
+ AC_MSG_CHECKING([for iconv declaration])
+ AC_CACHE_VAL(am_cv_proto_iconv, [
+ AC_TRY_COMPILE([
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
+ am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ AC_MSG_RESULT([$]{ac_t:-
+ }[$]am_cv_proto_iconv)
+ AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
+ [Define as const if the declaration of iconv() needs const.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/intdiv0.m4 b/libgpg-error-1.10/m4/intdiv0.m4
new file mode 100644
index 0000000..b8d7817
--- /dev/null
+++ b/libgpg-error-1.10/m4/intdiv0.m4
@@ -0,0 +1,70 @@
+# intdiv0.m4 serial 1 (gettext-0.11.3)
+dnl Copyright (C) 2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gt_INTDIV0],
+[
+ AC_REQUIRE([AC_PROG_CC])dnl
+ AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+ AC_CACHE_CHECK([whether integer division by zero raises SIGFPE],
+ gt_cv_int_divbyzero_sigfpe,
+ [
+ AC_TRY_RUN([
+#include <stdlib.h>
+#include <signal.h>
+
+static void
+#ifdef __cplusplus
+sigfpe_handler (int sig)
+#else
+sigfpe_handler (sig) int sig;
+#endif
+{
+ /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */
+ exit (sig != SIGFPE);
+}
+
+int x = 1;
+int y = 0;
+int z;
+int nan;
+
+int main ()
+{
+ signal (SIGFPE, sigfpe_handler);
+/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */
+#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP)
+ signal (SIGTRAP, sigfpe_handler);
+#endif
+/* Linux/SPARC yields signal SIGILL. */
+#if defined (__sparc__) && defined (__linux__)
+ signal (SIGILL, sigfpe_handler);
+#endif
+
+ z = x / y;
+ nan = y / y;
+ exit (1);
+}
+], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no,
+ [
+ # Guess based on the CPU.
+ case "$host_cpu" in
+ alpha* | i[34567]86 | m68k | s390*)
+ gt_cv_int_divbyzero_sigfpe="guessing yes";;
+ *)
+ gt_cv_int_divbyzero_sigfpe="guessing no";;
+ esac
+ ])
+ ])
+ case "$gt_cv_int_divbyzero_sigfpe" in
+ *yes) value=1;;
+ *) value=0;;
+ esac
+ AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value,
+ [Define if integer division by zero raises signal SIGFPE.])
+])
diff --git a/libgpg-error-1.10/m4/intmax.m4 b/libgpg-error-1.10/m4/intmax.m4
new file mode 100644
index 0000000..d99c999
--- /dev/null
+++ b/libgpg-error-1.10/m4/intmax.m4
@@ -0,0 +1,30 @@
+# intmax.m4 serial 2 (gettext-0.14.2)
+dnl Copyright (C) 2002-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the system has the 'intmax_t' type, but don't attempt to
+dnl find a replacement if it is lacking.
+
+AC_DEFUN([gt_TYPE_INTMAX_T],
+[
+ AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+ AC_CACHE_CHECK(for intmax_t, gt_cv_c_intmax_t,
+ [AC_TRY_COMPILE([
+#include <stddef.h>
+#include <stdlib.h>
+#if HAVE_STDINT_H_WITH_UINTMAX
+#include <stdint.h>
+#endif
+#if HAVE_INTTYPES_H_WITH_UINTMAX
+#include <inttypes.h>
+#endif
+], [intmax_t x = -1;], gt_cv_c_intmax_t=yes, gt_cv_c_intmax_t=no)])
+ if test $gt_cv_c_intmax_t = yes; then
+ AC_DEFINE(HAVE_INTMAX_T, 1,
+ [Define if you have the 'intmax_t' type in <stdint.h> or <inttypes.h>.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/inttypes-h.m4 b/libgpg-error-1.10/m4/inttypes-h.m4
new file mode 100644
index 0000000..d7ec94c
--- /dev/null
+++ b/libgpg-error-1.10/m4/inttypes-h.m4
@@ -0,0 +1,25 @@
+# inttypes-h.m4 serial 1 (gettext-0.15)
+dnl Copyright (C) 1997-2002, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H if <inttypes.h> exists and doesn't clash with
+# <sys/types.h>.
+
+AC_DEFUN([gl_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], gl_cv_header_inttypes_h,
+ [
+ AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [], gl_cv_header_inttypes_h=yes, gl_cv_header_inttypes_h=no)
+ ])
+ if test $gl_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
+ [Define if <inttypes.h> exists and doesn't clash with <sys/types.h>.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/inttypes-pri.m4 b/libgpg-error-1.10/m4/inttypes-pri.m4
new file mode 100644
index 0000000..ef00da7
--- /dev/null
+++ b/libgpg-error-1.10/m4/inttypes-pri.m4
@@ -0,0 +1,30 @@
+# inttypes-pri.m4 serial 2 (gettext-0.15)
+dnl Copyright (C) 1997-2002, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+# Define PRI_MACROS_BROKEN if <inttypes.h> exists and defines the PRI*
+# macros to non-string values. This is the case on AIX 4.3.3.
+
+AC_DEFUN([gt_INTTYPES_PRI],
+[
+ AC_REQUIRE([gl_HEADER_INTTYPES_H])
+ if test $gl_cv_header_inttypes_h = yes; then
+ AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken],
+ gt_cv_inttypes_pri_broken,
+ [
+ AC_TRY_COMPILE([#include <inttypes.h>
+#ifdef PRId32
+char *p = PRId32;
+#endif
+], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes)
+ ])
+ fi
+ if test "$gt_cv_inttypes_pri_broken" = yes; then
+ AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1,
+ [Define if <inttypes.h> exists and defines unusable PRI* macros.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/inttypes.m4 b/libgpg-error-1.10/m4/inttypes.m4
new file mode 100644
index 0000000..779bcea
--- /dev/null
+++ b/libgpg-error-1.10/m4/inttypes.m4
@@ -0,0 +1,25 @@
+# inttypes.m4 serial 1 (gettext-0.11.4)
+dnl Copyright (C) 1997-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H if <inttypes.h> exists and doesn't clash with
+# <sys/types.h>.
+
+AC_DEFUN([gt_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h,
+ [
+ AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no)
+ ])
+ if test $gt_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1,
+ [Define if <inttypes.h> exists and doesn't clash with <sys/types.h>.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/inttypes_h.m4 b/libgpg-error-1.10/m4/inttypes_h.m4
new file mode 100644
index 0000000..a5d075d
--- /dev/null
+++ b/libgpg-error-1.10/m4/inttypes_h.m4
@@ -0,0 +1,26 @@
+# inttypes_h.m4 serial 6
+dnl Copyright (C) 1997-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_INTTYPES_H_WITH_UINTMAX if <inttypes.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([gl_AC_HEADER_INTTYPES_H],
+[
+ AC_CACHE_CHECK([for inttypes.h], gl_cv_header_inttypes_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <inttypes.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ gl_cv_header_inttypes_h=yes,
+ gl_cv_header_inttypes_h=no)])
+ if test $gl_cv_header_inttypes_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1,
+ [Define if <inttypes.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/isc-posix.m4 b/libgpg-error-1.10/m4/isc-posix.m4
new file mode 100644
index 0000000..74dc8f2
--- /dev/null
+++ b/libgpg-error-1.10/m4/isc-posix.m4
@@ -0,0 +1,24 @@
+# isc-posix.m4 serial 2 (gettext-0.11.2)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
+
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
diff --git a/libgpg-error-1.10/m4/lcmessage.m4 b/libgpg-error-1.10/m4/lcmessage.m4
new file mode 100644
index 0000000..19aa77e
--- /dev/null
+++ b/libgpg-error-1.10/m4/lcmessage.m4
@@ -0,0 +1,30 @@
+# lcmessage.m4 serial 4 (gettext-0.14.2)
+dnl Copyright (C) 1995-2002, 2004-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995.
+
+# Check whether LC_MESSAGES is available in <locale.h>.
+
+AC_DEFUN([gt_LC_MESSAGES],
+[
+ AC_CACHE_CHECK([for LC_MESSAGES], gt_cv_val_LC_MESSAGES,
+ [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
+ gt_cv_val_LC_MESSAGES=yes, gt_cv_val_LC_MESSAGES=no)])
+ if test $gt_cv_val_LC_MESSAGES = yes; then
+ AC_DEFINE(HAVE_LC_MESSAGES, 1,
+ [Define if your <locale.h> file defines LC_MESSAGES.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/lib-ld.m4 b/libgpg-error-1.10/m4/lib-ld.m4
new file mode 100644
index 0000000..96c4e2c
--- /dev/null
+++ b/libgpg-error-1.10/m4/lib-ld.m4
@@ -0,0 +1,110 @@
+# lib-ld.m4 serial 3 (gettext-0.13)
+dnl Copyright (C) 1996-2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl Subroutines of libtool.m4,
+dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision
+dnl with libtool.m4.
+
+dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no.
+AC_DEFUN([AC_LIB_PROG_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac])
+with_gnu_ld=$acl_cv_prog_gnu_ld
+])
+
+dnl From libtool-1.4. Sets the variable LD.
+AC_DEFUN([AC_LIB_PROG_LD],
+[AC_ARG_WITH(gnu-ld,
+[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
+test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by GCC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]* | [A-Za-z]:[\\/]*)]
+ [re_direlt='/[^/][^/]*/\.\./']
+ # Canonicalize the path of ld
+ ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(acl_cv_path_LD,
+[if test -z "$LD"; then
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ acl_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some GNU ld's only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
+ fi
+ done
+ IFS="$ac_save_ifs"
+else
+ acl_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$acl_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_LIB_PROG_LD_GNU
+])
diff --git a/libgpg-error-1.10/m4/lib-link.m4 b/libgpg-error-1.10/m4/lib-link.m4
new file mode 100644
index 0000000..e3d26fc
--- /dev/null
+++ b/libgpg-error-1.10/m4/lib-link.m4
@@ -0,0 +1,709 @@
+# lib-link.m4 serial 13 (gettext-0.17)
+dnl Copyright (C) 2001-2007 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_PREREQ(2.54)
+
+dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and
+dnl augments the CPPFLAGS variable.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+ ac_cv_lib[]Name[]_libs="$LIB[]NAME"
+ ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME"
+ ac_cv_lib[]Name[]_cppflags="$INC[]NAME"
+ ac_cv_lib[]Name[]_prefix="$LIB[]NAME[]_PREFIX"
+ ])
+ LIB[]NAME="$ac_cv_lib[]Name[]_libs"
+ LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs"
+ INC[]NAME="$ac_cv_lib[]Name[]_cppflags"
+ LIB[]NAME[]_PREFIX="$ac_cv_lib[]Name[]_prefix"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ AC_SUBST([LIB]NAME[_PREFIX])
+ dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the
+ dnl results of this search when this library appears as a dependency.
+ HAVE_LIB[]NAME=yes
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode)
+dnl searches for libname and the libraries corresponding to explicit and
+dnl implicit dependencies, together with the specified include files and
+dnl the ability to compile and link the specified testcode. If found, it
+dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and
+dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and
+dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs
+dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty.
+dnl Sets and AC_SUBSTs the LIB${NAME}_PREFIX variable to nonempty if libname
+dnl was found in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_HAVE_LINKFLAGS],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ AC_REQUIRE([AC_LIB_RPATH])
+ define([Name],[translit([$1],[./-], [___])])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+
+ dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME
+ dnl accordingly.
+ AC_LIB_LINKFLAGS_BODY([$1], [$2])
+
+ dnl Add $INC[]NAME to CPPFLAGS before performing the following checks,
+ dnl because if the user has installed lib[]Name and not disabled its use
+ dnl via --without-lib[]Name-prefix, he wants to use it.
+ ac_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME)
+
+ AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [
+ ac_save_LIBS="$LIBS"
+ LIBS="$LIBS $LIB[]NAME"
+ AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no])
+ LIBS="$ac_save_LIBS"
+ ])
+ if test "$ac_cv_lib[]Name" = yes; then
+ HAVE_LIB[]NAME=yes
+ AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.])
+ AC_MSG_CHECKING([how to link with lib[]$1])
+ AC_MSG_RESULT([$LIB[]NAME])
+ else
+ HAVE_LIB[]NAME=no
+ dnl If $LIB[]NAME didn't lead to a usable library, we don't need
+ dnl $INC[]NAME either.
+ CPPFLAGS="$ac_save_CPPFLAGS"
+ LIB[]NAME=
+ LTLIB[]NAME=
+ LIB[]NAME[]_PREFIX=
+ fi
+ AC_SUBST([HAVE_LIB]NAME)
+ AC_SUBST([LIB]NAME)
+ AC_SUBST([LTLIB]NAME)
+ AC_SUBST([LIB]NAME[_PREFIX])
+ undefine([Name])
+ undefine([NAME])
+])
+
+dnl Determine the platform dependent parameters needed to use rpath:
+dnl acl_libext,
+dnl acl_shlibext,
+dnl acl_hardcode_libdir_flag_spec,
+dnl acl_hardcode_libdir_separator,
+dnl acl_hardcode_direct,
+dnl acl_hardcode_minus_L.
+AC_DEFUN([AC_LIB_RPATH],
+[
+ dnl Tell automake >= 1.10 to complain if config.rpath is missing.
+ m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([config.rpath])])
+ AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS
+ AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld
+ AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host
+ AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir
+ AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [
+ CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \
+ ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh
+ . ./conftest.sh
+ rm -f ./conftest.sh
+ acl_cv_rpath=done
+ ])
+ wl="$acl_cv_wl"
+ acl_libext="$acl_cv_libext"
+ acl_shlibext="$acl_cv_shlibext"
+ acl_libname_spec="$acl_cv_libname_spec"
+ acl_library_names_spec="$acl_cv_library_names_spec"
+ acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ acl_hardcode_direct="$acl_cv_hardcode_direct"
+ acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ dnl Determine whether the user wants rpath handling at all.
+ AC_ARG_ENABLE(rpath,
+ [ --disable-rpath do not hardcode runtime library paths],
+ :, enable_rpath=yes)
+])
+
+dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and
+dnl the libraries corresponding to explicit and implicit dependencies.
+dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables.
+dnl Also, sets the LIB${NAME}_PREFIX variable to nonempty if libname was found
+dnl in ${LIB${NAME}_PREFIX}/$acl_libdirstem.
+AC_DEFUN([AC_LIB_LINKFLAGS_BODY],
+[
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-],
+ [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])])
+ dnl Autoconf >= 2.61 supports dots in --with options.
+ define([N_A_M_E],[m4_if(m4_version_compare(m4_defn([m4_PACKAGE_VERSION]),[2.61]),[-1],[translit([$1],[.],[_])],[$1])])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib]N_A_M_E[-prefix],
+[ --with-lib]N_A_M_E[-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib
+ --without-lib]N_A_M_E[-prefix don't search for lib$1 in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+])
+ dnl Search the library and its dependencies in $additional_libdir and
+ dnl $LDFLAGS. Using breadth-first-seach.
+ LIB[]NAME=
+ LTLIB[]NAME=
+ INC[]NAME=
+ LIB[]NAME[]_PREFIX=
+ rpathdirs=
+ ltrpathdirs=
+ names_already_handled=
+ names_next_round='$1 $2'
+ while test -n "$names_next_round"; do
+ names_this_round="$names_next_round"
+ names_next_round=
+ for name in $names_this_round; do
+ already_handled=
+ for n in $names_already_handled; do
+ if test "$n" = "$name"; then
+ already_handled=yes
+ break
+ fi
+ done
+ if test -z "$already_handled"; then
+ names_already_handled="$names_already_handled $name"
+ dnl See if it was already located by an earlier AC_LIB_LINKFLAGS
+ dnl or AC_LIB_HAVE_LINKFLAGS call.
+ uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'`
+ eval value=\"\$HAVE_LIB$uppername\"
+ if test -n "$value"; then
+ if test "$value" = yes; then
+ eval value=\"\$LIB$uppername\"
+ test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value"
+ eval value=\"\$LTLIB$uppername\"
+ test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value"
+ else
+ dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined
+ dnl that this library doesn't exist. So just drop it.
+ :
+ fi
+ else
+ dnl Search the library lib$name in $additional_libdir and $LDFLAGS
+ dnl and the already constructed $LIBNAME/$LTLIBNAME.
+ found_dir=
+ found_la=
+ found_so=
+ found_a=
+ eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
+ if test -n "$acl_shlibext"; then
+ shrext=".$acl_shlibext" # typically: shrext=.so
+ else
+ shrext=
+ fi
+ if test $use_additional = yes; then
+ dir="$additional_libdir"
+ dnl The same code as in the loop below:
+ dnl First look for a shared library.
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ dnl Then look for a static library.
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ fi
+ if test "X$found_dir" = "X"; then
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ case "$x" in
+ -L*)
+ dir=`echo "X$x" | sed -e 's/^X-L//'`
+ dnl First look for a shared library.
+ if test -n "$acl_shlibext"; then
+ if test -f "$dir/$libname$shrext"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext"
+ else
+ if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
+ ver=`(cd "$dir" && \
+ for f in "$libname$shrext".*; do echo "$f"; done \
+ | sed -e "s,^$libname$shrext\\\\.,," \
+ | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
+ | sed 1q ) 2>/dev/null`
+ if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
+ found_dir="$dir"
+ found_so="$dir/$libname$shrext.$ver"
+ fi
+ else
+ eval library_names=\"$acl_library_names_spec\"
+ for f in $library_names; do
+ if test -f "$dir/$f"; then
+ found_dir="$dir"
+ found_so="$dir/$f"
+ break
+ fi
+ done
+ fi
+ fi
+ fi
+ dnl Then look for a static library.
+ if test "X$found_dir" = "X"; then
+ if test -f "$dir/$libname.$acl_libext"; then
+ found_dir="$dir"
+ found_a="$dir/$libname.$acl_libext"
+ fi
+ fi
+ if test "X$found_dir" != "X"; then
+ if test -f "$dir/$libname.la"; then
+ found_la="$dir/$libname.la"
+ fi
+ fi
+ ;;
+ esac
+ if test "X$found_dir" != "X"; then
+ break
+ fi
+ done
+ fi
+ if test "X$found_dir" != "X"; then
+ dnl Found the library.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name"
+ if test "X$found_so" != "X"; then
+ dnl Linking with a shared library. We attempt to hardcode its
+ dnl directory into the executable's runpath, unless it's the
+ dnl standard /usr/lib.
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
+ dnl No hardcoding is needed.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $found_dir"
+ fi
+ dnl The hardcoding into $LIBNAME is system dependent.
+ if test "$acl_hardcode_direct" = yes; then
+ dnl Using DIR/libNAME.so during linking hardcodes DIR into the
+ dnl resulting binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode DIR into the resulting
+ dnl binary.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $found_dir"
+ fi
+ else
+ dnl Rely on "-L$found_dir".
+ dnl But don't add it if it's already contained in the LDFLAGS
+ dnl or the already constructed $LIBNAME
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$found_dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir"
+ fi
+ if test "$acl_hardcode_minus_L" != no; then
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so"
+ else
+ dnl We cannot use $acl_hardcode_runpath_var and LD_RUN_PATH
+ dnl here, because this doesn't fit in flags passed to the
+ dnl compiler. So give up. No hardcoding. This affects only
+ dnl very old systems.
+ dnl FIXME: Not sure whether we should use
+ dnl "-L$found_dir -l$name" or "-L$found_dir $found_so"
+ dnl here.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ fi
+ else
+ if test "X$found_a" != "X"; then
+ dnl Linking with a static library.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a"
+ else
+ dnl We shouldn't come here, but anyway it's good to have a
+ dnl fallback.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name"
+ fi
+ fi
+ dnl Assume the include files are nearby.
+ additional_includedir=
+ case "$found_dir" in
+ */$acl_libdirstem | */$acl_libdirstem/)
+ basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
+ LIB[]NAME[]_PREFIX="$basedir"
+ additional_includedir="$basedir/include"
+ ;;
+ esac
+ if test "X$additional_includedir" != "X"; then
+ dnl Potentially add $additional_includedir to $INCNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 3. if it's already present in $CPPFLAGS or the already
+ dnl constructed $INCNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ for x in $CPPFLAGS $INC[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $INCNAME.
+ INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ fi
+ dnl Look for dependencies.
+ if test -n "$found_la"; then
+ dnl Read the .la file. It defines the variables
+ dnl dlname, library_names, old_library, dependency_libs, current,
+ dnl age, revision, installed, dlopen, dlpreopen, libdir.
+ save_libdir="$libdir"
+ case "$found_la" in
+ */* | *\\*) . "$found_la" ;;
+ *) . "./$found_la" ;;
+ esac
+ libdir="$save_libdir"
+ dnl We use only dependency_libs.
+ for dep in $dependency_libs; do
+ case "$dep" in
+ -L*)
+ additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
+ dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 3. if it's already present in $LDFLAGS or the already
+ dnl constructed $LIBNAME,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ haveit=
+ for x in $LDFLAGS $LIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LIBNAME.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ haveit=
+ for x in $LDFLAGS $LTLIB[]NAME; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LTLIBNAME.
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ ;;
+ -R*)
+ dir=`echo "X$dep" | sed -e 's/^X-R//'`
+ if test "$enable_rpath" != no; then
+ dnl Potentially add DIR to rpathdirs.
+ dnl The rpathdirs will be appended to $LIBNAME at the end.
+ haveit=
+ for x in $rpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ dnl Potentially add DIR to ltrpathdirs.
+ dnl The ltrpathdirs will be appended to $LTLIBNAME at the end.
+ haveit=
+ for x in $ltrpathdirs; do
+ if test "X$x" = "X$dir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ ltrpathdirs="$ltrpathdirs $dir"
+ fi
+ fi
+ ;;
+ -l*)
+ dnl Handle this in the next round.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'`
+ ;;
+ *.la)
+ dnl Handle this in the next round. Throw away the .la's
+ dnl directory; it is already contained in a preceding -L
+ dnl option.
+ names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'`
+ ;;
+ *)
+ dnl Most likely an immediate library name.
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep"
+ ;;
+ esac
+ done
+ fi
+ else
+ dnl Didn't find the library; assume it is in the system directories
+ dnl known to the linker and runtime loader. (All the system
+ dnl directories known to the linker should also be known to the
+ dnl runtime loader, otherwise the system is severely misconfigured.)
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name"
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name"
+ fi
+ fi
+ fi
+ done
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n "$acl_hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user must
+ dnl pass all path elements in one option. We can arrange that for a
+ dnl single library, but not when more than one $LIBNAMEs are used.
+ alldirs=
+ for found_dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ done
+ dnl Note: acl_hardcode_libdir_flag_spec uses $libdir and $wl.
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for found_dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$found_dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag"
+ done
+ fi
+ fi
+ if test "X$ltrpathdirs" != "X"; then
+ dnl When using libtool, the option that works for both libraries and
+ dnl executables is -R. The -R options are cumulative.
+ for found_dir in $ltrpathdirs; do
+ LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir"
+ done
+ fi
+])
+
+dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR,
+dnl unless already present in VAR.
+dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes
+dnl contains two or three consecutive elements that belong together.
+AC_DEFUN([AC_LIB_APPENDTOVAR],
+[
+ for element in [$2]; do
+ haveit=
+ for x in $[$1]; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X$element"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ [$1]="${[$1]}${[$1]:+ }$element"
+ fi
+ done
+])
+
+dnl For those cases where a variable contains several -L and -l options
+dnl referring to unknown libraries and directories, this macro determines the
+dnl necessary additional linker options for the runtime path.
+dnl AC_LIB_LINKFLAGS_FROM_LIBS([LDADDVAR], [LIBSVALUE], [USE-LIBTOOL])
+dnl sets LDADDVAR to linker options needed together with LIBSVALUE.
+dnl If USE-LIBTOOL evaluates to non-empty, linking with libtool is assumed,
+dnl otherwise linking without libtool is assumed.
+AC_DEFUN([AC_LIB_LINKFLAGS_FROM_LIBS],
+[
+ AC_REQUIRE([AC_LIB_RPATH])
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ $1=
+ if test "$enable_rpath" != no; then
+ if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ dnl Use an explicit option to hardcode directories into the resulting
+ dnl binary.
+ rpathdirs=
+ next=
+ for opt in $2; do
+ if test -n "$next"; then
+ dir="$next"
+ dnl No need to hardcode the standard /usr/lib.
+ if test "X$dir" != "X/usr/$acl_libdirstem"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ next=
+ else
+ case $opt in
+ -L) next=yes ;;
+ -L*) dir=`echo "X$opt" | sed -e 's,^X-L,,'`
+ dnl No need to hardcode the standard /usr/lib.
+ if test "X$dir" != "X/usr/$acl_libdirstem"; then
+ rpathdirs="$rpathdirs $dir"
+ fi
+ next= ;;
+ *) next= ;;
+ esac
+ fi
+ done
+ if test "X$rpathdirs" != "X"; then
+ if test -n ""$3""; then
+ dnl libtool is used for linking. Use -R options.
+ for dir in $rpathdirs; do
+ $1="${$1}${$1:+ }-R$dir"
+ done
+ else
+ dnl The linker is used for linking directly.
+ if test -n "$acl_hardcode_libdir_separator"; then
+ dnl Weird platform: only the last -rpath option counts, the user
+ dnl must pass all path elements in one option.
+ alldirs=
+ for dir in $rpathdirs; do
+ alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$dir"
+ done
+ acl_save_libdir="$libdir"
+ libdir="$alldirs"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ $1="$flag"
+ else
+ dnl The -rpath options are cumulative.
+ for dir in $rpathdirs; do
+ acl_save_libdir="$libdir"
+ libdir="$dir"
+ eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ libdir="$acl_save_libdir"
+ $1="${$1}${$1:+ }$flag"
+ done
+ fi
+ fi
+ fi
+ fi
+ fi
+ AC_SUBST([$1])
+])
diff --git a/libgpg-error-1.10/m4/lib-prefix.m4 b/libgpg-error-1.10/m4/lib-prefix.m4
new file mode 100644
index 0000000..a8684e1
--- /dev/null
+++ b/libgpg-error-1.10/m4/lib-prefix.m4
@@ -0,0 +1,185 @@
+# lib-prefix.m4 serial 5 (gettext-0.15)
+dnl Copyright (C) 2001-2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and
+dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't
+dnl require excessive bracketing.
+ifdef([AC_HELP_STRING],
+[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])],
+[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])])
+
+dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed
+dnl to access previously installed libraries. The basic assumption is that
+dnl a user will want packages to use other packages he previously installed
+dnl with the same --prefix option.
+dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate
+dnl libraries, but is otherwise very convenient.
+AC_DEFUN([AC_LIB_PREFIX],
+[
+ AC_BEFORE([$0], [AC_LIB_LINKFLAGS])
+ AC_REQUIRE([AC_PROG_CC])
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_LIB_PREPARE_MULTILIB])
+ AC_REQUIRE([AC_LIB_PREPARE_PREFIX])
+ dnl By default, look in $includedir and $libdir.
+ use_additional=yes
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ AC_LIB_ARG_WITH([lib-prefix],
+[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
+ --without-lib-prefix don't search for libraries in includedir and libdir],
+[
+ if test "X$withval" = "Xno"; then
+ use_additional=no
+ else
+ if test "X$withval" = "X"; then
+ AC_LIB_WITH_FINAL_PREFIX([
+ eval additional_includedir=\"$includedir\"
+ eval additional_libdir=\"$libdir\"
+ ])
+ else
+ additional_includedir="$withval/include"
+ additional_libdir="$withval/$acl_libdirstem"
+ fi
+ fi
+])
+ if test $use_additional = yes; then
+ dnl Potentially add $additional_includedir to $CPPFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/include,
+ dnl 2. if it's already present in $CPPFLAGS,
+ dnl 3. if it's /usr/local/include and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_includedir" != "X/usr/include"; then
+ haveit=
+ for x in $CPPFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-I$additional_includedir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_includedir" = "X/usr/local/include"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux* | gnu* | k*bsd*-gnu) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_includedir"; then
+ dnl Really add $additional_includedir to $CPPFLAGS.
+ CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir"
+ fi
+ fi
+ fi
+ fi
+ dnl Potentially add $additional_libdir to $LDFLAGS.
+ dnl But don't add it
+ dnl 1. if it's the standard /usr/lib,
+ dnl 2. if it's already present in $LDFLAGS,
+ dnl 3. if it's /usr/local/lib and we are using GCC on Linux,
+ dnl 4. if it doesn't exist as a directory.
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
+ haveit=
+ for x in $LDFLAGS; do
+ AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"])
+ if test "X$x" = "X-L$additional_libdir"; then
+ haveit=yes
+ break
+ fi
+ done
+ if test -z "$haveit"; then
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
+ if test -n "$GCC"; then
+ case $host_os in
+ linux*) haveit=yes;;
+ esac
+ fi
+ fi
+ if test -z "$haveit"; then
+ if test -d "$additional_libdir"; then
+ dnl Really add $additional_libdir to $LDFLAGS.
+ LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir"
+ fi
+ fi
+ fi
+ fi
+ fi
+])
+
+dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix,
+dnl acl_final_exec_prefix, containing the values to which $prefix and
+dnl $exec_prefix will expand at the end of the configure script.
+AC_DEFUN([AC_LIB_PREPARE_PREFIX],
+[
+ dnl Unfortunately, prefix and exec_prefix get only finally determined
+ dnl at the end of configure.
+ if test "X$prefix" = "XNONE"; then
+ acl_final_prefix="$ac_default_prefix"
+ else
+ acl_final_prefix="$prefix"
+ fi
+ if test "X$exec_prefix" = "XNONE"; then
+ acl_final_exec_prefix='${prefix}'
+ else
+ acl_final_exec_prefix="$exec_prefix"
+ fi
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ eval acl_final_exec_prefix=\"$acl_final_exec_prefix\"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the
+dnl variables prefix and exec_prefix bound to the values they will have
+dnl at the end of the configure script.
+AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX],
+[
+ acl_save_prefix="$prefix"
+ prefix="$acl_final_prefix"
+ acl_save_exec_prefix="$exec_prefix"
+ exec_prefix="$acl_final_exec_prefix"
+ $1
+ exec_prefix="$acl_save_exec_prefix"
+ prefix="$acl_save_prefix"
+])
+
+dnl AC_LIB_PREPARE_MULTILIB creates a variable acl_libdirstem, containing
+dnl the basename of the libdir, either "lib" or "lib64".
+AC_DEFUN([AC_LIB_PREPARE_MULTILIB],
+[
+ dnl There is no formal standard regarding lib and lib64. The current
+ dnl practice is that on a system supporting 32-bit and 64-bit instruction
+ dnl sets or ABIs, 64-bit libraries go under $prefix/lib64 and 32-bit
+ dnl libraries go under $prefix/lib. We determine the compiler's default
+ dnl mode by looking at the compiler's library search path. If at least
+ dnl of its elements ends in /lib64 or points to a directory whose absolute
+ dnl pathname ends in /lib64, we assume a 64-bit ABI. Otherwise we use the
+ dnl default, namely "lib".
+ acl_libdirstem=lib
+ searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+ if test -n "$searchpath"; then
+ acl_save_IFS="${IFS= }"; IFS=":"
+ for searchdir in $searchpath; do
+ if test -d "$searchdir"; then
+ case "$searchdir" in
+ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+ *) searchdir=`cd "$searchdir" && pwd`
+ case "$searchdir" in
+ */lib64 ) acl_libdirstem=lib64 ;;
+ esac ;;
+ esac
+ fi
+ done
+ IFS="$acl_save_IFS"
+ fi
+])
diff --git a/libgpg-error-1.10/m4/libtool.m4 b/libgpg-error-1.10/m4/libtool.m4
new file mode 100644
index 0000000..2ca1c1f
--- /dev/null
+++ b/libgpg-error-1.10/m4/libtool.m4
@@ -0,0 +1,7373 @@
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 56 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+ lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+ ;;
+esac
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+ lt_cl_success=:
+ test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+ exec AS_MESSAGE_LOG_FD>/dev/null
+ $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+ exec AS_MESSAGE_LOG_FD>>config.log
+ $lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ _LT_PROG_XSI_SHELLFNS
+
+ sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=echo
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\(.*\)$/\1/
+ p
+ }
+ }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+ aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+ [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+ [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_SHELL_INIT
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$lt_ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+ ;;
+esac
+
+ECHO=${lt_ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X[$]1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $ECHO works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+
+if test "X[$]1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<_LT_EOF
+[$]*
+_LT_EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$lt_ECHO"; then
+ if test "X${echo_test_string+set}" != Xset; then
+ # find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+ { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+ then
+ break
+ fi
+ done
+ fi
+
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+ else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$dir/echo"
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+
+ if test "X$ECHO" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ ECHO='print -r'
+ elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+ else
+ # Try using printf.
+ ECHO='printf %s\n'
+ if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+ if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "[$]0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ ECHO=echo
+ fi
+ fi
+ fi
+ fi
+ fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+ lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+ [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+ = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen="dlopen"],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[[4-9]]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[[45]]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH printed by
+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
+ # path with ; separators, and with drive letters. We can handle the
+ # drive letters (cygwin fileutils understands them), so leave them,
+ # especially as we might pass files found there to a mingw objdump,
+ # which wouldn't understand a cygwinified path. Ahh.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[123]]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+interix[[3-9]]*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # Some binutils ld are patched to set DT_RUNPATH
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsdelf*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='NetBSD ld.elf_so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris*)
+ symcode='[[BDRT]]'
+ ;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[[4-9]]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC*)
+ # IBM XL 8.0 on PPC
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd* | netbsdelf*-gnu)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ ccc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xl*)
+ # IBM XL C 8.0/Fortran 10.1 on PPC
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ *Sun\ F*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+])
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ linux* | k*bsd*-gnu)
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[[3-9]]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=no
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ freebsd1*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(int foo(void) {},
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ )
+ LDFLAGS="$save_LDFLAGS"
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ netbsd* | netbsdelf*-gnu)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+ [[If ld is used when linking, flag to hardcode $libdir into a binary
+ during linking. This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+ [Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd[[12]]*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 will use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ xl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='echo'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=echo
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='echo'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ else
+ prev=
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ case $p in
+ -L* | -R*)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ ;;
+
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ CC=${F77-"f77"}
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ CC=${FC-"f95"}
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=${1%%=*}
+ func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=${1%.*}.lo
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=$(( $[*] ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=${#1}
+}
+
+_LT_EOF
+ ;;
+ *) # Bourne compatible functions.
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+}
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "X${3}" \
+ | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+ esac
+}
+
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
+
+# func_opt_split
+func_opt_split ()
+{
+ func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+ func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+ func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+ func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+ func_arith_result=`expr "$[@]"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+ func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+ yes)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$[1]+=\$[2]"
+}
+_LT_EOF
+ ;;
+ *)
+ cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+ eval "$[1]=\$$[1]\$[2]"
+}
+
+_LT_EOF
+ ;;
+ esac
+])
diff --git a/libgpg-error-1.10/m4/lock.m4 b/libgpg-error-1.10/m4/lock.m4
new file mode 100644
index 0000000..d1ea1ca
--- /dev/null
+++ b/libgpg-error-1.10/m4/lock.m4
@@ -0,0 +1,289 @@
+# lock.m4 serial 2 (gettext-0.15)
+dnl Copyright (C) 2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl Tests for a multithreading library to be used.
+dnl Defines at most one of the macros USE_POSIX_THREADS, USE_SOLARIS_THREADS,
+dnl USE_PTH_THREADS, USE_WIN32_THREADS
+dnl Sets the variables LIBTHREAD and LTLIBTHREAD to the linker options for use
+dnl in a Makefile (LIBTHREAD for use without libtool, LTLIBTHREAD for use with
+dnl libtool).
+dnl Sets the variables LIBMULTITHREAD and LTLIBMULTITHREAD similarly, for
+dnl programs that really need multithread functionality. The difference
+dnl between LIBTHREAD and LIBMULTITHREAD is that on platforms supporting weak
+dnl symbols, typically LIBTHREAD="" whereas LIBMULTITHREAD="-lpthread".
+dnl Adds to CPPFLAGS the flag -D_REENTRANT or -D_THREAD_SAFE if needed for
+dnl multithread-safe programs.
+
+AC_DEFUN([gl_LOCK],
+[
+ AC_REQUIRE([gl_LOCK_BODY])
+])
+
+dnl The guts of gl_LOCK. Needs to be expanded only once.
+
+AC_DEFUN([gl_LOCK_BODY],
+[
+ dnl Ordering constraints: This macro modifies CPPFLAGS in a way that
+ dnl influences the result of the autoconf tests that test for *_unlocked
+ dnl declarations, on AIX 5 at least. Therefore it must come early.
+ AC_BEFORE([$0], [gl_FUNC_GLIBC_UNLOCKED_IO])dnl
+ AC_BEFORE([$0], [gl_ARGP])dnl
+
+ AC_REQUIRE([AC_CANONICAL_HOST])
+ AC_REQUIRE([AC_GNU_SOURCE]) dnl needed for pthread_rwlock_t on glibc systems
+ dnl Check for multithreading.
+ AC_ARG_ENABLE(threads,
+AC_HELP_STRING([--enable-threads={posix|solaris|pth|win32}], [specify multithreading API])
+AC_HELP_STRING([--disable-threads], [build without multithread safety]),
+ gl_use_threads=$enableval, gl_use_threads=yes)
+ gl_threads_api=none
+ LIBTHREAD=
+ LTLIBTHREAD=
+ LIBMULTITHREAD=
+ LTLIBMULTITHREAD=
+ if test "$gl_use_threads" != no; then
+ dnl Check whether the compiler and linker support weak declarations.
+ AC_MSG_CHECKING([whether imported symbols can be declared weak])
+ gl_have_weak=no
+ AC_TRY_LINK([extern void xyzzy ();
+#pragma weak xyzzy], [xyzzy();], [gl_have_weak=yes])
+ AC_MSG_RESULT([$gl_have_weak])
+ if test "$gl_use_threads" = yes || test "$gl_use_threads" = posix; then
+ # On OSF/1, the compiler needs the flag -pthread or -D_REENTRANT so that
+ # it groks <pthread.h>.
+ gl_save_CPPFLAGS="$CPPFLAGS"
+ CPPFLAGS="$CPPFLAGS -D_REENTRANT"
+ AC_CHECK_HEADER(pthread.h, gl_have_pthread_h=yes, gl_have_pthread_h=no)
+ CPPFLAGS="$gl_save_CPPFLAGS"
+ if test "$gl_have_pthread_h" = yes; then
+ # Other possible tests:
+ # -lpthreads (FSU threads, PCthreads)
+ # -lgthreads
+ case "$host_os" in
+ osf*)
+ # On OSF/1, the compiler needs the flag -D_REENTRANT so that it
+ # groks <pthread.h>. cc also understands the flag -pthread, but
+ # we don't use it because 1. gcc-2.95 doesn't understand -pthread,
+ # 2. putting a flag into CPPFLAGS that has an effect on the linker
+ # causes the AC_TRY_LINK test below to succeed unexpectedly,
+ # leading to wrong values of LIBTHREAD and LTLIBTHREAD.
+ CPPFLAGS="$CPPFLAGS -D_REENTRANT"
+ ;;
+ esac
+ gl_have_pthread=
+ # Test whether both pthread_mutex_lock and pthread_mutexattr_init exist
+ # in libc. IRIX 6.5 has the first one in both libc and libpthread, but
+ # the second one only in libpthread, and lock.c needs it.
+ AC_TRY_LINK([#include <pthread.h>],
+ [pthread_mutex_lock((pthread_mutex_t*)0);
+ pthread_mutexattr_init((pthread_mutexattr_t*)0);],
+ [gl_have_pthread=yes])
+ # Test for libpthread by looking for pthread_kill. (Not pthread_self,
+ # since it is defined as a macro on OSF/1.)
+ if test -n "$gl_have_pthread"; then
+ # The program links fine without libpthread. But it may actually
+ # need to link with libpthread in order to create multiple threads.
+ AC_CHECK_LIB(pthread, pthread_kill,
+ [LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread
+ # On Solaris and HP-UX, most pthread functions exist also in libc.
+ # Therefore pthread_in_use() needs to actually try to create a
+ # thread: pthread_create from libc will fail, whereas
+ # pthread_create will actually create a thread.
+ case "$host_os" in
+ solaris* | hpux*)
+ AC_DEFINE([PTHREAD_IN_USE_DETECTION_HARD], 1,
+ [Define if the pthread_in_use() detection is hard.])
+ esac
+ ])
+ else
+ # Some library is needed. Try libpthread and libc_r.
+ AC_CHECK_LIB(pthread, pthread_kill,
+ [gl_have_pthread=yes
+ LIBTHREAD=-lpthread LTLIBTHREAD=-lpthread
+ LIBMULTITHREAD=-lpthread LTLIBMULTITHREAD=-lpthread])
+ if test -z "$gl_have_pthread"; then
+ # For FreeBSD 4.
+ AC_CHECK_LIB(c_r, pthread_kill,
+ [gl_have_pthread=yes
+ LIBTHREAD=-lc_r LTLIBTHREAD=-lc_r
+ LIBMULTITHREAD=-lc_r LTLIBMULTITHREAD=-lc_r])
+ fi
+ fi
+ if test -n "$gl_have_pthread"; then
+ gl_threads_api=posix
+ AC_DEFINE([USE_POSIX_THREADS], 1,
+ [Define if the POSIX multithreading library can be used.])
+ if test -n "$LIBMULTITHREAD" || test -n "$LTLIBMULTITHREAD"; then
+ if test $gl_have_weak = yes; then
+ AC_DEFINE([USE_POSIX_THREADS_WEAK], 1,
+ [Define if references to the POSIX multithreading library should be made weak.])
+ LIBTHREAD=
+ LTLIBTHREAD=
+ fi
+ fi
+ # OSF/1 4.0 and MacOS X 10.1 lack the pthread_rwlock_t type and the
+ # pthread_rwlock_* functions.
+ AC_CHECK_TYPE([pthread_rwlock_t],
+ [AC_DEFINE([HAVE_PTHREAD_RWLOCK], 1,
+ [Define if the POSIX multithreading library has read/write locks.])],
+ [],
+ [#include <pthread.h>])
+ # glibc defines PTHREAD_MUTEX_RECURSIVE as enum, not as a macro.
+ AC_TRY_COMPILE([#include <pthread.h>],
+ [#if __FreeBSD__ == 4
+error "No, in FreeBSD 4.0 recursive mutexes actually don't work."
+#else
+int x = (int)PTHREAD_MUTEX_RECURSIVE;
+#endif],
+ [AC_DEFINE([HAVE_PTHREAD_MUTEX_RECURSIVE], 1,
+ [Define if the <pthread.h> defines PTHREAD_MUTEX_RECURSIVE.])])
+ # Some systems optimize for single-threaded programs by default, and
+ # need special flags to disable these optimizations. For example, the
+ # definition of 'errno' in <errno.h>.
+ case "$host_os" in
+ aix* | freebsd*) CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE" ;;
+ solaris*) CPPFLAGS="$CPPFLAGS -D_REENTRANT" ;;
+ esac
+ fi
+ fi
+ fi
+ if test -z "$gl_have_pthread"; then
+ if test "$gl_use_threads" = yes || test "$gl_use_threads" = solaris; then
+ gl_have_solaristhread=
+ gl_save_LIBS="$LIBS"
+ LIBS="$LIBS -lthread"
+ AC_TRY_LINK([#include <thread.h>
+#include <synch.h>],
+ [thr_self();],
+ [gl_have_solaristhread=yes])
+ LIBS="$gl_save_LIBS"
+ if test -n "$gl_have_solaristhread"; then
+ gl_threads_api=solaris
+ LIBTHREAD=-lthread
+ LTLIBTHREAD=-lthread
+ LIBMULTITHREAD="$LIBTHREAD"
+ LTLIBMULTITHREAD="$LTLIBTHREAD"
+ AC_DEFINE([USE_SOLARIS_THREADS], 1,
+ [Define if the old Solaris multithreading library can be used.])
+ if test $gl_have_weak = yes; then
+ AC_DEFINE([USE_SOLARIS_THREADS_WEAK], 1,
+ [Define if references to the old Solaris multithreading library should be made weak.])
+ LIBTHREAD=
+ LTLIBTHREAD=
+ fi
+ fi
+ fi
+ fi
+ if test "$gl_use_threads" = pth; then
+ gl_save_CPPFLAGS="$CPPFLAGS"
+ AC_LIB_LINKFLAGS(pth)
+ gl_have_pth=
+ gl_save_LIBS="$LIBS"
+ LIBS="$LIBS -lpth"
+ AC_TRY_LINK([#include <pth.h>], [pth_self();], gl_have_pth=yes)
+ LIBS="$gl_save_LIBS"
+ if test -n "$gl_have_pth"; then
+ gl_threads_api=pth
+ LIBTHREAD="$LIBPTH"
+ LTLIBTHREAD="$LTLIBPTH"
+ LIBMULTITHREAD="$LIBTHREAD"
+ LTLIBMULTITHREAD="$LTLIBTHREAD"
+ AC_DEFINE([USE_PTH_THREADS], 1,
+ [Define if the GNU Pth multithreading library can be used.])
+ if test -n "$LIBMULTITHREAD" || test -n "$LTLIBMULTITHREAD"; then
+ if test $gl_have_weak = yes; then
+ AC_DEFINE([USE_PTH_THREADS_WEAK], 1,
+ [Define if references to the GNU Pth multithreading library should be made weak.])
+ LIBTHREAD=
+ LTLIBTHREAD=
+ fi
+ fi
+ else
+ CPPFLAGS="$gl_save_CPPFLAGS"
+ fi
+ fi
+ if test -z "$gl_have_pthread"; then
+ if test "$gl_use_threads" = yes || test "$gl_use_threads" = win32; then
+ if { case "$host_os" in
+ mingw*) true;;
+ *) false;;
+ esac
+ }; then
+ gl_threads_api=win32
+ AC_DEFINE([USE_WIN32_THREADS], 1,
+ [Define if the Win32 multithreading API can be used.])
+ fi
+ fi
+ fi
+ fi
+ AC_MSG_CHECKING([for multithread API to use])
+ AC_MSG_RESULT([$gl_threads_api])
+ AC_SUBST(LIBTHREAD)
+ AC_SUBST(LTLIBTHREAD)
+ AC_SUBST(LIBMULTITHREAD)
+ AC_SUBST(LTLIBMULTITHREAD)
+ gl_PREREQ_LOCK
+])
+
+# Prerequisites of lib/lock.c.
+AC_DEFUN([gl_PREREQ_LOCK], [
+ AC_REQUIRE([AC_C_INLINE])
+])
+
+dnl Survey of platforms:
+dnl
+dnl Platform Available Compiler Supports test-lock
+dnl flavours option weak result
+dnl --------------- --------- --------- -------- ---------
+dnl Linux 2.4/glibc posix -lpthread Y OK
+dnl
+dnl GNU Hurd/glibc posix
+dnl
+dnl FreeBSD 5.3 posix -lc_r Y
+dnl posix -lkse ? Y
+dnl posix -lpthread ? Y
+dnl posix -lthr Y
+dnl
+dnl FreeBSD 5.2 posix -lc_r Y
+dnl posix -lkse Y
+dnl posix -lthr Y
+dnl
+dnl FreeBSD 4.0,4.10 posix -lc_r Y OK
+dnl
+dnl NetBSD 1.6 --
+dnl
+dnl OpenBSD 3.4 posix -lpthread Y OK
+dnl
+dnl MacOS X 10.[123] posix -lpthread Y OK
+dnl
+dnl Solaris 7,8,9 posix -lpthread Y Sol 7,8: 0.0; Sol 9: OK
+dnl solaris -lthread Y Sol 7,8: 0.0; Sol 9: OK
+dnl
+dnl HP-UX 11 posix -lpthread N (cc) OK
+dnl Y (gcc)
+dnl
+dnl IRIX 6.5 posix -lpthread Y 0.5
+dnl
+dnl AIX 4.3,5.1 posix -lpthread N AIX 4: 0.5; AIX 5: OK
+dnl
+dnl OSF/1 4.0,5.1 posix -pthread (cc) N OK
+dnl -lpthread (gcc) Y
+dnl
+dnl Cygwin posix -lpthread Y OK
+dnl
+dnl Any of the above pth -lpth 0.0
+dnl
+dnl Mingw win32 N OK
+dnl
+dnl BeOS 5 --
+dnl
+dnl The test-lock result shows what happens if in test-lock.c EXPLICIT_YIELD is
+dnl turned off:
+dnl OK if all three tests terminate OK,
+dnl 0.5 if the first test terminates OK but the second one loops endlessly,
+dnl 0.0 if the first test already loops endlessly.
diff --git a/libgpg-error-1.10/m4/longdouble.m4 b/libgpg-error-1.10/m4/longdouble.m4
new file mode 100644
index 0000000..25590f4
--- /dev/null
+++ b/libgpg-error-1.10/m4/longdouble.m4
@@ -0,0 +1,31 @@
+# longdouble.m4 serial 2 (gettext-0.15)
+dnl Copyright (C) 2002-2003, 2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the compiler supports the 'long double' type.
+dnl Prerequisite: AC_PROG_CC
+
+dnl This file is only needed in autoconf <= 2.59. Newer versions of autoconf
+dnl have a macro AC_TYPE_LONG_DOUBLE with identical semantics.
+
+AC_DEFUN([gt_TYPE_LONGDOUBLE],
+[
+ AC_CACHE_CHECK([for long double], gt_cv_c_long_double,
+ [if test "$GCC" = yes; then
+ gt_cv_c_long_double=yes
+ else
+ AC_TRY_COMPILE([
+ /* The Stardent Vistra knows sizeof(long double), but does not support it. */
+ long double foo = 0.0;
+ /* On Ultrix 4.3 cc, long double is 4 and double is 8. */
+ int array [2*(sizeof(long double) >= sizeof(double)) - 1];
+ ], ,
+ gt_cv_c_long_double=yes, gt_cv_c_long_double=no)
+ fi])
+ if test $gt_cv_c_long_double = yes; then
+ AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if you have the 'long double' type.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/longlong.m4 b/libgpg-error-1.10/m4/longlong.m4
new file mode 100644
index 0000000..7b399e0
--- /dev/null
+++ b/libgpg-error-1.10/m4/longlong.m4
@@ -0,0 +1,23 @@
+# longlong.m4 serial 5
+dnl Copyright (C) 1999-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_LONG_LONG if 'long long' works.
+
+AC_DEFUN([gl_AC_TYPE_LONG_LONG],
+[
+ AC_CACHE_CHECK([for long long], ac_cv_type_long_long,
+ [AC_TRY_LINK([long long ll = 1LL; int i = 63;],
+ [long long llmax = (long long) -1;
+ return ll << i | ll >> i | llmax / ll | llmax % ll;],
+ ac_cv_type_long_long=yes,
+ ac_cv_type_long_long=no)])
+ if test $ac_cv_type_long_long = yes; then
+ AC_DEFINE(HAVE_LONG_LONG, 1,
+ [Define if you have the 'long long' type.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/ltoptions.m4 b/libgpg-error-1.10/m4/ltoptions.m4
new file mode 100644
index 0000000..34151a3
--- /dev/null
+++ b/libgpg-error-1.10/m4/ltoptions.m4
@@ -0,0 +1,368 @@
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [0], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [pic_mode="$withval"],
+ [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/libgpg-error-1.10/m4/ltsugar.m4 b/libgpg-error-1.10/m4/ltsugar.m4
new file mode 100644
index 0000000..9000a05
--- /dev/null
+++ b/libgpg-error-1.10/m4/ltsugar.m4
@@ -0,0 +1,123 @@
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
diff --git a/libgpg-error-1.10/m4/ltversion.m4 b/libgpg-error-1.10/m4/ltversion.m4
new file mode 100644
index 0000000..b8e154f
--- /dev/null
+++ b/libgpg-error-1.10/m4/ltversion.m4
@@ -0,0 +1,23 @@
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# Generated from ltversion.in.
+
+# serial 3012 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.2.6])
+m4_define([LT_PACKAGE_REVISION], [1.3012])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.2.6'
+macro_revision='1.3012'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff --git a/libgpg-error-1.10/m4/lt~obsolete.m4 b/libgpg-error-1.10/m4/lt~obsolete.m4
new file mode 100644
index 0000000..637bb20
--- /dev/null
+++ b/libgpg-error-1.10/m4/lt~obsolete.m4
@@ -0,0 +1,92 @@
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 4 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC], [AC_DEFUN([AC_LIBTOOL_RC])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
diff --git a/libgpg-error-1.10/m4/nls.m4 b/libgpg-error-1.10/m4/nls.m4
new file mode 100644
index 0000000..7967cc2
--- /dev/null
+++ b/libgpg-error-1.10/m4/nls.m4
@@ -0,0 +1,31 @@
+# nls.m4 serial 3 (gettext-0.15)
+dnl Copyright (C) 1995-2003, 2005-2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ(2.50)
+
+AC_DEFUN([AM_NLS],
+[
+ AC_MSG_CHECKING([whether NLS is requested])
+ dnl Default is enabled NLS
+ AC_ARG_ENABLE(nls,
+ [ --disable-nls do not use Native Language Support],
+ USE_NLS=$enableval, USE_NLS=yes)
+ AC_MSG_RESULT($USE_NLS)
+ AC_SUBST(USE_NLS)
+])
diff --git a/libgpg-error-1.10/m4/po.m4 b/libgpg-error-1.10/m4/po.m4
new file mode 100644
index 0000000..0734762
--- /dev/null
+++ b/libgpg-error-1.10/m4/po.m4
@@ -0,0 +1,449 @@
+# po.m4 serial 15 (gettext-0.17)
+dnl Copyright (C) 1995-2007 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1995-2000.
+dnl Bruno Haible <haible@clisp.cons.org>, 2000-2003.
+
+AC_PREREQ(2.50)
+
+dnl Checks for all prerequisites of the po subdirectory.
+AC_DEFUN([AM_PO_SUBDIRS],
+[
+ AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+ AC_REQUIRE([AC_PROG_INSTALL])dnl
+ AC_REQUIRE([AM_PROG_MKDIR_P])dnl defined by automake
+ AC_REQUIRE([AM_NLS])dnl
+
+ dnl Release version of the gettext macros. This is used to ensure that
+ dnl the gettext macros and po/Makefile.in.in are in sync.
+ AC_SUBST([GETTEXT_MACRO_VERSION], [0.17])
+
+ dnl Perform the following tests also if --disable-nls has been given,
+ dnl because they are needed for "make dist" to work.
+
+ dnl Search for GNU msgfmt in the PATH.
+ dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions.
+ dnl The second test excludes FreeBSD msgfmt.
+ AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
+ [$ac_dir/$ac_word --statistics /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
+
+ dnl Test whether it is GNU msgfmt >= 0.15.
+changequote(,)dnl
+ case `$MSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) MSGFMT_015=: ;;
+ *) MSGFMT_015=$MSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([MSGFMT_015])
+changequote(,)dnl
+ case `$GMSGFMT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) GMSGFMT_015=: ;;
+ *) GMSGFMT_015=$GMSGFMT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([GMSGFMT_015])
+
+ dnl Search for GNU xgettext 0.12 or newer in the PATH.
+ dnl The first test excludes Solaris xgettext and early GNU xgettext versions.
+ dnl The second test excludes FreeBSD xgettext.
+ AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
+ [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1 &&
+ (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)],
+ :)
+ dnl Remove leftover from FreeBSD xgettext call.
+ rm -f messages.po
+
+ dnl Test whether it is GNU xgettext >= 0.15.
+changequote(,)dnl
+ case `$XGETTEXT --version | sed 1q | sed -e 's,^[^0-9]*,,'` in
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-4] | 0.1[0-4].*) XGETTEXT_015=: ;;
+ *) XGETTEXT_015=$XGETTEXT ;;
+ esac
+changequote([,])dnl
+ AC_SUBST([XGETTEXT_015])
+
+ dnl Search for GNU msgmerge 0.11 or newer in the PATH.
+ AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge,
+ [$ac_dir/$ac_word --update -q /dev/null /dev/null >&]AS_MESSAGE_LOG_FD[ 2>&1], :)
+
+ dnl Installation directories.
+ dnl Autoconf >= 2.60 defines localedir. For older versions of autoconf, we
+ dnl have to define it here, so that it can be used in po/Makefile.
+ test -n "$localedir" || localedir='${datadir}/locale'
+ AC_SUBST([localedir])
+
+ dnl Support for AM_XGETTEXT_OPTION.
+ test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
+ AC_SUBST([XGETTEXT_EXTRA_OPTIONS])
+
+ AC_CONFIG_COMMANDS([po-directories], [[
+ for ac_file in $CONFIG_FILES; do
+ # Support "outfile[:infile[:infile...]]"
+ case "$ac_file" in
+ *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ esac
+ # PO directories have a Makefile.in generated from Makefile.in.in.
+ case "$ac_file" in */Makefile.in)
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+ # Treat a directory as a PO directory if and only if it has a
+ # POTFILES.in file. This allows packages to have multiple PO
+ # directories under different names or in different locations.
+ if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
+ rm -f "$ac_dir/POTFILES"
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
+ cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
+ POMAKEFILEDEPS="POTFILES.in"
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
+ # on $ac_dir but don't depend on user-specified configuration
+ # parameters.
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # The set of available languages was given in configure.in.
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
+ fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ done
+ fi
+ test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
+ if test -f "$f"; then
+ case "$f" in
+ *.orig | *.bak | *~) ;;
+ *) cat "$f" >> "$ac_dir/Makefile" ;;
+ esac
+ fi
+ done
+ fi
+ ;;
+ esac
+ done]],
+ [# Capture the value of obsolete ALL_LINGUAS because we need it to compute
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
+ # from automake < 1.5.
+ eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
+ # Capture the value of LINGUAS because we need it to compute CATALOGS.
+ LINGUAS="${LINGUAS-%UNSET%}"
+ ])
+])
+
+dnl Postprocesses a Makefile in a directory containing PO files.
+AC_DEFUN([AM_POSTPROCESS_PO_MAKEFILE],
+[
+ # When this code is run, in config.status, two variables have already been
+ # set:
+ # - OBSOLETE_ALL_LINGUAS is the value of LINGUAS set in configure.in,
+ # - LINGUAS is the value of the environment variable LINGUAS at configure
+ # time.
+
+changequote(,)dnl
+ # Adjust a relative srcdir.
+ ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
+ ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
+ ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
+ # In autoconf-2.13 it is called $ac_given_srcdir.
+ # In autoconf-2.50 it is called $srcdir.
+ test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
+ case "$ac_given_srcdir" in
+ .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
+ /*) top_srcdir="$ac_given_srcdir" ;;
+ *) top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ # Find a way to echo strings without interpreting backslash.
+ if test "X`(echo '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='echo'
+ else
+ if test "X`(printf '%s\n' '\t') 2>/dev/null`" = 'X\t'; then
+ gt_echo='printf %s\n'
+ else
+ echo_func () {
+ cat <<EOT
+$*
+EOT
+ }
+ gt_echo='echo_func'
+ fi
+ fi
+
+ # A sed script that extracts the value of VARIABLE from a Makefile.
+ sed_x_variable='
+# Test if the hold space is empty.
+x
+s/P/P/
+x
+ta
+# Yes it was empty. Look if we have the expected variable definition.
+/^[ ]*VARIABLE[ ]*=/{
+ # Seen the first line of the variable definition.
+ s/^[ ]*VARIABLE[ ]*=//
+ ba
+}
+bd
+:a
+# Here we are processing a line from the variable definition.
+# Remove comment, more precisely replace it with a space.
+s/#.*$/ /
+# See if the line ends in a backslash.
+tb
+:b
+s/\\$//
+# Print the line, without the trailing backslash.
+p
+tc
+# There was no trailing backslash. The end of the variable definition is
+# reached. Clear the hold space.
+s/^.*$//
+x
+bd
+:c
+# A trailing backslash means that the variable definition continues in the
+# next line. Put a nonempty string into the hold space to indicate this.
+s/^.*$/P/
+x
+:d
+'
+changequote([,])dnl
+
+ # Set POTFILES to the value of the Makefile variable POTFILES.
+ sed_x_POTFILES=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/POTFILES/g'`
+ POTFILES=`sed -n -e "$sed_x_POTFILES" < "$ac_file"`
+ # Compute POTFILES_DEPS as
+ # $(foreach file, $(POTFILES), $(top_srcdir)/$(file))
+ POTFILES_DEPS=
+ for file in $POTFILES; do
+ POTFILES_DEPS="$POTFILES_DEPS "'$(top_srcdir)/'"$file"
+ done
+ POMAKEFILEDEPS=""
+
+ if test -n "$OBSOLETE_ALL_LINGUAS"; then
+ test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete"
+ fi
+ if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
+ # The LINGUAS file contains the set of available languages.
+ ALL_LINGUAS_=`sed -e "/^#/d" -e "s/#.*//" "$ac_given_srcdir/$ac_dir/LINGUAS"`
+ POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS"
+ else
+ # Set ALL_LINGUAS to the value of the Makefile variable LINGUAS.
+ sed_x_LINGUAS=`$gt_echo "$sed_x_variable" | sed -e '/^ *#/d' -e 's/VARIABLE/LINGUAS/g'`
+ ALL_LINGUAS_=`sed -n -e "$sed_x_LINGUAS" < "$ac_file"`
+ fi
+ # Hide the ALL_LINGUAS assigment from automake < 1.5.
+ eval 'ALL_LINGUAS''=$ALL_LINGUAS_'
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
+ # Compute PROPERTIESFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).properties)
+ # Compute CLASSFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(top_srcdir)/$(DOMAIN)_$(lang).class)
+ # Compute QMFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).qm)
+ # Compute MSGFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang)).msg)
+ # Compute RESOURCESDLLFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(frob $(lang))/$(DOMAIN).resources.dll)
+ case "$ac_given_srcdir" in
+ .) srcdirpre= ;;
+ *) srcdirpre='$(srcdir)/' ;;
+ esac
+ POFILES=
+ UPDATEPOFILES=
+ DUMMYPOFILES=
+ GMOFILES=
+ PROPERTIESFILES=
+ CLASSFILES=
+ QMFILES=
+ MSGFILES=
+ RESOURCESDLLFILES=
+ for lang in $ALL_LINGUAS; do
+ POFILES="$POFILES $srcdirpre$lang.po"
+ UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
+ DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
+ PROPERTIESFILES="$PROPERTIESFILES \$(top_srcdir)/\$(DOMAIN)_$lang.properties"
+ CLASSFILES="$CLASSFILES \$(top_srcdir)/\$(DOMAIN)_$lang.class"
+ QMFILES="$QMFILES $srcdirpre$lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ MSGFILES="$MSGFILES $srcdirpre$frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ RESOURCESDLLFILES="$RESOURCESDLLFILES $srcdirpre$frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ # CATALOGS depends on both $ac_dir and the user's LINGUAS
+ # environment variable.
+ INST_LINGUAS=
+ if test -n "$ALL_LINGUAS"; then
+ for presentlang in $ALL_LINGUAS; do
+ useit=no
+ if test "%UNSET%" != "$LINGUAS"; then
+ desiredlanguages="$LINGUAS"
+ else
+ desiredlanguages="$ALL_LINGUAS"
+ fi
+ for desiredlang in $desiredlanguages; do
+ # Use the presentlang catalog if desiredlang is
+ # a. equal to presentlang, or
+ # b. a variant of presentlang (because in this case,
+ # presentlang can be used as a fallback for messages
+ # which are not translated in the desiredlang catalog).
+ case "$desiredlang" in
+ "$presentlang"*) useit=yes;;
+ esac
+ done
+ if test $useit = yes; then
+ INST_LINGUAS="$INST_LINGUAS $presentlang"
+ fi
+ done
+ fi
+ CATALOGS=
+ JAVACATALOGS=
+ QTCATALOGS=
+ TCLCATALOGS=
+ CSHARPCATALOGS=
+ if test -n "$INST_LINGUAS"; then
+ for lang in $INST_LINGUAS; do
+ CATALOGS="$CATALOGS $lang.gmo"
+ JAVACATALOGS="$JAVACATALOGS \$(DOMAIN)_$lang.properties"
+ QTCATALOGS="$QTCATALOGS $lang.qm"
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ TCLCATALOGS="$TCLCATALOGS $frobbedlang.msg"
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ CSHARPCATALOGS="$CSHARPCATALOGS $frobbedlang/\$(DOMAIN).resources.dll"
+ done
+ fi
+
+ sed -e "s|@POTFILES_DEPS@|$POTFILES_DEPS|g" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@PROPERTIESFILES@|$PROPERTIESFILES|g" -e "s|@CLASSFILES@|$CLASSFILES|g" -e "s|@QMFILES@|$QMFILES|g" -e "s|@MSGFILES@|$MSGFILES|g" -e "s|@RESOURCESDLLFILES@|$RESOURCESDLLFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@JAVACATALOGS@|$JAVACATALOGS|g" -e "s|@QTCATALOGS@|$QTCATALOGS|g" -e "s|@TCLCATALOGS@|$TCLCATALOGS|g" -e "s|@CSHARPCATALOGS@|$CSHARPCATALOGS|g" -e 's,^#distdir:,distdir:,' < "$ac_file" > "$ac_file.tmp"
+ if grep -l '@TCLCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/\..*$//' -e 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang.msg: $lang.po
+ @echo "\$(MSGFMT) -c --tcl -d \$(srcdir) -l $lang $srcdirpre$lang.po"; \
+ \$(MSGFMT) -c --tcl -d "\$(srcdir)" -l $lang $srcdirpre$lang.po || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if grep -l '@CSHARPCATALOGS@' "$ac_file" > /dev/null; then
+ # Add dependencies that cannot be formulated as a simple suffix rule.
+ for lang in $ALL_LINGUAS; do
+ frobbedlang=`echo $lang | sed -e 's/_/-/g' -e 's/^sr-CS/sr-SP/' -e 's/@latin$/-Latn/' -e 's/@cyrillic$/-Cyrl/' -e 's/^sr-SP$/sr-SP-Latn/' -e 's/^uz-UZ$/uz-UZ-Latn/'`
+ cat >> "$ac_file.tmp" <<EOF
+$frobbedlang/\$(DOMAIN).resources.dll: $lang.po
+ @echo "\$(MSGFMT) -c --csharp -d \$(srcdir) -l $lang $srcdirpre$lang.po -r \$(DOMAIN)"; \
+ \$(MSGFMT) -c --csharp -d "\$(srcdir)" -l $lang $srcdirpre$lang.po -r "\$(DOMAIN)" || { rm -f "\$(srcdir)/$frobbedlang.msg"; exit 1; }
+EOF
+ done
+ fi
+ if test -n "$POMAKEFILEDEPS"; then
+ cat >> "$ac_file.tmp" <<EOF
+Makefile: $POMAKEFILEDEPS
+EOF
+ fi
+ mv "$ac_file.tmp" "$ac_file"
+])
+
+dnl Initializes the accumulator used by AM_XGETTEXT_OPTION.
+AC_DEFUN([AM_XGETTEXT_OPTION_INIT],
+[
+ XGETTEXT_EXTRA_OPTIONS=
+])
+
+dnl Registers an option to be passed to xgettext in the po subdirectory.
+AC_DEFUN([AM_XGETTEXT_OPTION],
+[
+ AC_REQUIRE([AM_XGETTEXT_OPTION_INIT])
+ XGETTEXT_EXTRA_OPTIONS="$XGETTEXT_EXTRA_OPTIONS $1"
+])
diff --git a/libgpg-error-1.10/m4/printf-posix.m4 b/libgpg-error-1.10/m4/printf-posix.m4
new file mode 100644
index 0000000..af10170
--- /dev/null
+++ b/libgpg-error-1.10/m4/printf-posix.m4
@@ -0,0 +1,44 @@
+# printf-posix.m4 serial 2 (gettext-0.13.1)
+dnl Copyright (C) 2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether the printf() function supports POSIX/XSI format strings with
+dnl positions.
+
+AC_DEFUN([gt_PRINTF_POSIX],
+[
+ AC_REQUIRE([AC_PROG_CC])
+ AC_CACHE_CHECK([whether printf() supports POSIX/XSI format strings],
+ gt_cv_func_printf_posix,
+ [
+ AC_TRY_RUN([
+#include <stdio.h>
+#include <string.h>
+/* The string "%2$d %1$d", with dollar characters protected from the shell's
+ dollar expansion (possibly an autoconf bug). */
+static char format[] = { '%', '2', '$', 'd', ' ', '%', '1', '$', 'd', '\0' };
+static char buf[100];
+int main ()
+{
+ sprintf (buf, format, 33, 55);
+ return (strcmp (buf, "55 33") != 0);
+}], gt_cv_func_printf_posix=yes, gt_cv_func_printf_posix=no,
+ [
+ AC_EGREP_CPP(notposix, [
+#if defined __NetBSD__ || defined _MSC_VER || defined __MINGW32__ || defined __CYGWIN__
+ notposix
+#endif
+ ], gt_cv_func_printf_posix="guessing no",
+ gt_cv_func_printf_posix="guessing yes")
+ ])
+ ])
+ case $gt_cv_func_printf_posix in
+ *yes)
+ AC_DEFINE(HAVE_POSIX_PRINTF, 1,
+ [Define if your printf() function supports format strings with positions.])
+ ;;
+ esac
+])
diff --git a/libgpg-error-1.10/m4/progtest.m4 b/libgpg-error-1.10/m4/progtest.m4
new file mode 100644
index 0000000..a56365c
--- /dev/null
+++ b/libgpg-error-1.10/m4/progtest.m4
@@ -0,0 +1,92 @@
+# progtest.m4 serial 4 (gettext-0.14.2)
+dnl Copyright (C) 1996-2003, 2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+dnl
+dnl This file can can be used in projects which are not available under
+dnl the GNU General Public License or the GNU Library General Public
+dnl License but which still want to provide support for the GNU gettext
+dnl functionality.
+dnl Please note that the actual code of the GNU gettext library is covered
+dnl by the GNU Library General Public License, and the rest of the GNU
+dnl gettext package package is covered by the GNU General Public License.
+dnl They are *not* in the public domain.
+
+dnl Authors:
+dnl Ulrich Drepper <drepper@cygnus.com>, 1996.
+
+AC_PREREQ(2.50)
+
+# Search path for a program which passes the given test.
+
+dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
+dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
+AC_DEFUN([AM_PATH_PROG_WITH_TEST],
+[
+# Prepare PATH_SEPARATOR.
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+# Find out how to test for executable files. Don't use a zero-byte file,
+# as systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+ ac_executable_p="test -x"
+else
+ ac_executable_p="test -f"
+fi
+rm -f conf$$.file
+
+# Extract the first word of "$2", so it can be a program name with args.
+set dummy $2; ac_word=[$]2
+AC_MSG_CHECKING([for $ac_word])
+AC_CACHE_VAL(ac_cv_path_$1,
+[case "[$]$1" in
+ [[\\/]]* | ?:[[\\/]]*)
+ ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
+ ;;
+ *)
+ ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in ifelse([$5], , $PATH, [$5]); do
+ IFS="$ac_save_IFS"
+ test -z "$ac_dir" && ac_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then
+ echo "$as_me: trying $ac_dir/$ac_word..." >&AS_MESSAGE_LOG_FD
+ if [$3]; then
+ ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext"
+ break 2
+ fi
+ fi
+ done
+ done
+ IFS="$ac_save_IFS"
+dnl If no 4th arg is given, leave the cache variable unset,
+dnl so AC_PATH_PROGS will keep looking.
+ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
+])dnl
+ ;;
+esac])dnl
+$1="$ac_cv_path_$1"
+if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
+ AC_MSG_RESULT([$]$1)
+else
+ AC_MSG_RESULT(no)
+fi
+AC_SUBST($1)dnl
+])
diff --git a/libgpg-error-1.10/m4/signed.m4 b/libgpg-error-1.10/m4/signed.m4
new file mode 100644
index 0000000..048f593
--- /dev/null
+++ b/libgpg-error-1.10/m4/signed.m4
@@ -0,0 +1,17 @@
+# signed.m4 serial 1 (gettext-0.10.40)
+dnl Copyright (C) 2001-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([bh_C_SIGNED],
+[
+ AC_CACHE_CHECK([for signed], bh_cv_c_signed,
+ [AC_TRY_COMPILE(, [signed char x;], bh_cv_c_signed=yes, bh_cv_c_signed=no)])
+ if test $bh_cv_c_signed = no; then
+ AC_DEFINE(signed, ,
+ [Define to empty if the C compiler doesn't support this keyword.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/size_max.m4 b/libgpg-error-1.10/m4/size_max.m4
new file mode 100644
index 0000000..029e471
--- /dev/null
+++ b/libgpg-error-1.10/m4/size_max.m4
@@ -0,0 +1,60 @@
+# size_max.m4 serial 4
+dnl Copyright (C) 2003, 2005-2006 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+AC_DEFUN([gl_SIZE_MAX],
+[
+ AC_CHECK_HEADERS(stdint.h)
+ dnl First test whether the system already has SIZE_MAX.
+ AC_MSG_CHECKING([for SIZE_MAX])
+ result=
+ AC_EGREP_CPP([Found it], [
+#include <limits.h>
+#if HAVE_STDINT_H
+#include <stdint.h>
+#endif
+#ifdef SIZE_MAX
+Found it
+#endif
+], result=yes)
+ if test -z "$result"; then
+ dnl Define it ourselves. Here we assume that the type 'size_t' is not wider
+ dnl than the type 'unsigned long'. Try hard to find a definition that can
+ dnl be used in a preprocessor #if, i.e. doesn't contain a cast.
+ _AC_COMPUTE_INT([sizeof (size_t) * CHAR_BIT - 1], size_t_bits_minus_1,
+ [#include <stddef.h>
+#include <limits.h>], size_t_bits_minus_1=)
+ _AC_COMPUTE_INT([sizeof (size_t) <= sizeof (unsigned int)], fits_in_uint,
+ [#include <stddef.h>], fits_in_uint=)
+ if test -n "$size_t_bits_minus_1" && test -n "$fits_in_uint"; then
+ if test $fits_in_uint = 1; then
+ dnl Even though SIZE_MAX fits in an unsigned int, it must be of type
+ dnl 'unsigned long' if the type 'size_t' is the same as 'unsigned long'.
+ AC_TRY_COMPILE([#include <stddef.h>
+ extern size_t foo;
+ extern unsigned long foo;
+ ], [], fits_in_uint=0)
+ fi
+ dnl We cannot use 'expr' to simplify this expression, because 'expr'
+ dnl works only with 'long' integers in the host environment, while we
+ dnl might be cross-compiling from a 32-bit platform to a 64-bit platform.
+ if test $fits_in_uint = 1; then
+ result="(((1U << $size_t_bits_minus_1) - 1) * 2 + 1)"
+ else
+ result="(((1UL << $size_t_bits_minus_1) - 1) * 2 + 1)"
+ fi
+ else
+ dnl Shouldn't happen, but who knows...
+ result='((size_t)~(size_t)0)'
+ fi
+ fi
+ AC_MSG_RESULT([$result])
+ if test "$result" != yes; then
+ AC_DEFINE_UNQUOTED([SIZE_MAX], [$result],
+ [Define as the maximum value of type 'size_t', if the system doesn't define it.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/stdint_h.m4 b/libgpg-error-1.10/m4/stdint_h.m4
new file mode 100644
index 0000000..3355f35
--- /dev/null
+++ b/libgpg-error-1.10/m4/stdint_h.m4
@@ -0,0 +1,26 @@
+# stdint_h.m4 serial 5
+dnl Copyright (C) 1997-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_STDINT_H_WITH_UINTMAX if <stdint.h> exists,
+# doesn't clash with <sys/types.h>, and declares uintmax_t.
+
+AC_DEFUN([gl_AC_HEADER_STDINT_H],
+[
+ AC_CACHE_CHECK([for stdint.h], gl_cv_header_stdint_h,
+ [AC_TRY_COMPILE(
+ [#include <sys/types.h>
+#include <stdint.h>],
+ [uintmax_t i = (uintmax_t) -1;],
+ gl_cv_header_stdint_h=yes,
+ gl_cv_header_stdint_h=no)])
+ if test $gl_cv_header_stdint_h = yes; then
+ AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1,
+ [Define if <stdint.h> exists, doesn't clash with <sys/types.h>,
+ and declares uintmax_t. ])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/uintmax_t.m4 b/libgpg-error-1.10/m4/uintmax_t.m4
new file mode 100644
index 0000000..bf83ed7
--- /dev/null
+++ b/libgpg-error-1.10/m4/uintmax_t.m4
@@ -0,0 +1,30 @@
+# uintmax_t.m4 serial 9
+dnl Copyright (C) 1997-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+AC_PREREQ(2.13)
+
+# Define uintmax_t to 'unsigned long' or 'unsigned long long'
+# if it is not already defined in <stdint.h> or <inttypes.h>.
+
+AC_DEFUN([gl_AC_TYPE_UINTMAX_T],
+[
+ AC_REQUIRE([gl_AC_HEADER_INTTYPES_H])
+ AC_REQUIRE([gl_AC_HEADER_STDINT_H])
+ if test $gl_cv_header_inttypes_h = no && test $gl_cv_header_stdint_h = no; then
+ AC_REQUIRE([gl_AC_TYPE_UNSIGNED_LONG_LONG])
+ test $ac_cv_type_unsigned_long_long = yes \
+ && ac_type='unsigned long long' \
+ || ac_type='unsigned long'
+ AC_DEFINE_UNQUOTED(uintmax_t, $ac_type,
+ [Define to unsigned long or unsigned long long
+ if <stdint.h> and <inttypes.h> don't define.])
+ else
+ AC_DEFINE(HAVE_UINTMAX_T, 1,
+ [Define if you have the 'uintmax_t' type in <stdint.h> or <inttypes.h>.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/ulonglong.m4 b/libgpg-error-1.10/m4/ulonglong.m4
new file mode 100644
index 0000000..dee10cc
--- /dev/null
+++ b/libgpg-error-1.10/m4/ulonglong.m4
@@ -0,0 +1,23 @@
+# ulonglong.m4 serial 4
+dnl Copyright (C) 1999-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Paul Eggert.
+
+# Define HAVE_UNSIGNED_LONG_LONG if 'unsigned long long' works.
+
+AC_DEFUN([gl_AC_TYPE_UNSIGNED_LONG_LONG],
+[
+ AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long,
+ [AC_TRY_LINK([unsigned long long ull = 1ULL; int i = 63;],
+ [unsigned long long ullmax = (unsigned long long) -1;
+ return ull << i | ull >> i | ullmax / ull | ullmax % ull;],
+ ac_cv_type_unsigned_long_long=yes,
+ ac_cv_type_unsigned_long_long=no)])
+ if test $ac_cv_type_unsigned_long_long = yes; then
+ AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1,
+ [Define if you have the 'unsigned long long' type.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/visibility.m4 b/libgpg-error-1.10/m4/visibility.m4
new file mode 100644
index 0000000..2ff6330
--- /dev/null
+++ b/libgpg-error-1.10/m4/visibility.m4
@@ -0,0 +1,52 @@
+# visibility.m4 serial 1 (gettext-0.15)
+dnl Copyright (C) 2005 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+
+dnl Tests whether the compiler supports the command-line option
+dnl -fvisibility=hidden and the function and variable attributes
+dnl __attribute__((__visibility__("hidden"))) and
+dnl __attribute__((__visibility__("default"))).
+dnl Does *not* test for __visibility__("protected") - which has tricky
+dnl semantics (see the 'vismain' test in glibc) and does not exist e.g. on
+dnl MacOS X.
+dnl Does *not* test for __visibility__("internal") - which has processor
+dnl dependent semantics.
+dnl Does *not* test for #pragma GCC visibility push(hidden) - which is
+dnl "really only recommended for legacy code".
+dnl Set the variable CFLAG_VISIBILITY.
+dnl Defines and sets the variable HAVE_VISIBILITY.
+
+AC_DEFUN([gl_VISIBILITY],
+[
+ AC_REQUIRE([AC_PROG_CC])
+ CFLAG_VISIBILITY=
+ HAVE_VISIBILITY=0
+ if test -n "$GCC"; then
+ AC_MSG_CHECKING([for simple visibility declarations])
+ AC_CACHE_VAL(gl_cv_cc_visibility, [
+ gl_save_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -fvisibility=hidden"
+ AC_TRY_COMPILE(
+ [extern __attribute__((__visibility__("hidden"))) int hiddenvar;
+ extern __attribute__((__visibility__("default"))) int exportedvar;
+ extern __attribute__((__visibility__("hidden"))) int hiddenfunc (void);
+ extern __attribute__((__visibility__("default"))) int exportedfunc (void);],
+ [],
+ gl_cv_cc_visibility=yes,
+ gl_cv_cc_visibility=no)
+ CFLAGS="$gl_save_CFLAGS"])
+ AC_MSG_RESULT([$gl_cv_cc_visibility])
+ if test $gl_cv_cc_visibility = yes; then
+ CFLAG_VISIBILITY="-fvisibility=hidden"
+ HAVE_VISIBILITY=1
+ fi
+ fi
+ AC_SUBST([CFLAG_VISIBILITY])
+ AC_SUBST([HAVE_VISIBILITY])
+ AC_DEFINE_UNQUOTED([HAVE_VISIBILITY], [$HAVE_VISIBILITY],
+ [Define to 1 or 0, depending whether the compiler supports simple visibility declarations.])
+])
diff --git a/libgpg-error-1.10/m4/wchar_t.m4 b/libgpg-error-1.10/m4/wchar_t.m4
new file mode 100644
index 0000000..cde2129
--- /dev/null
+++ b/libgpg-error-1.10/m4/wchar_t.m4
@@ -0,0 +1,20 @@
+# wchar_t.m4 serial 1 (gettext-0.12)
+dnl Copyright (C) 2002-2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether <stddef.h> has the 'wchar_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WCHAR_T],
+[
+ AC_CACHE_CHECK([for wchar_t], gt_cv_c_wchar_t,
+ [AC_TRY_COMPILE([#include <stddef.h>
+ wchar_t foo = (wchar_t)'\0';], ,
+ gt_cv_c_wchar_t=yes, gt_cv_c_wchar_t=no)])
+ if test $gt_cv_c_wchar_t = yes; then
+ AC_DEFINE(HAVE_WCHAR_T, 1, [Define if you have the 'wchar_t' type.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/wint_t.m4 b/libgpg-error-1.10/m4/wint_t.m4
new file mode 100644
index 0000000..b8fff9c
--- /dev/null
+++ b/libgpg-error-1.10/m4/wint_t.m4
@@ -0,0 +1,20 @@
+# wint_t.m4 serial 1 (gettext-0.12)
+dnl Copyright (C) 2003 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl From Bruno Haible.
+dnl Test whether <wchar.h> has the 'wint_t' type.
+dnl Prerequisite: AC_PROG_CC
+
+AC_DEFUN([gt_TYPE_WINT_T],
+[
+ AC_CACHE_CHECK([for wint_t], gt_cv_c_wint_t,
+ [AC_TRY_COMPILE([#include <wchar.h>
+ wint_t foo = (wchar_t)'\0';], ,
+ gt_cv_c_wint_t=yes, gt_cv_c_wint_t=no)])
+ if test $gt_cv_c_wint_t = yes; then
+ AC_DEFINE(HAVE_WINT_T, 1, [Define if you have the 'wint_t' type.])
+ fi
+])
diff --git a/libgpg-error-1.10/m4/xsize.m4 b/libgpg-error-1.10/m4/xsize.m4
new file mode 100644
index 0000000..85bb721
--- /dev/null
+++ b/libgpg-error-1.10/m4/xsize.m4
@@ -0,0 +1,13 @@
+# xsize.m4 serial 3
+dnl Copyright (C) 2003-2004 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+AC_DEFUN([gl_XSIZE],
+[
+ dnl Prerequisites of lib/xsize.h.
+ AC_REQUIRE([gl_SIZE_MAX])
+ AC_REQUIRE([AC_C_INLINE])
+ AC_CHECK_HEADERS(stdint.h)
+])
diff --git a/libgpg-error-1.10/missing b/libgpg-error-1.10/missing
new file mode 100755
index 0000000..894e786
--- /dev/null
+++ b/libgpg-error-1.10/missing
@@ -0,0 +1,360 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ # If the file does not exist, the user really needs makeinfo;
+ # let's fail without touching anything.
+ test -f $file || exit 1
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/libgpg-error-1.10/mkinstalldirs b/libgpg-error-1.10/mkinstalldirs
new file mode 100755
index 0000000..6fbe5e1
--- /dev/null
+++ b/libgpg-error-1.10/mkinstalldirs
@@ -0,0 +1,150 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+
+scriptversion=2004-02-15.20
+
+# Original author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain.
+#
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [--version] [-m MODE] DIR ...
+
+Create each directory DIR (with mode MODE, if specified), including all
+leading file name components.
+
+Report bugs to <bug-automake@gnu.org>."
+
+# process command line arguments
+while test $# -gt 0 ; do
+ case $1 in
+ -h | --help | --h*) # -h for help
+ echo "$usage"
+ exit 0
+ ;;
+ -m) # -m PERM arg
+ shift
+ test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+ dirmode=$1
+ shift
+ ;;
+ --version)
+ echo "$0 $scriptversion"
+ exit 0
+ ;;
+ --) # stop option processing
+ shift
+ break
+ ;;
+ -*) # unknown option
+ echo "$usage" 1>&2
+ exit 1
+ ;;
+ *) # first non-opt arg
+ break
+ ;;
+ esac
+done
+
+for file
+do
+ if test -d "$file"; then
+ shift
+ else
+ break
+ fi
+done
+
+case $# in
+ 0) exit 0 ;;
+esac
+
+# Solaris 8's mkdir -p isn't thread-safe. If you mkdir -p a/b and
+# mkdir -p a/c at the same time, both will detect that a is missing,
+# one will create a, then the other will try to create a and die with
+# a "File exists" error. This is a problem when calling mkinstalldirs
+# from a parallel make. We use --version in the probe to restrict
+# ourselves to GNU mkdir, which is thread-safe.
+case $dirmode in
+ '')
+ if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ echo "mkdir -p -- $*"
+ exec mkdir -p -- "$@"
+ else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ test -d ./-p && rmdir ./-p
+ test -d ./--version && rmdir ./--version
+ fi
+ ;;
+ *)
+ if mkdir -m "$dirmode" -p --version . >/dev/null 2>&1 &&
+ test ! -d ./--version; then
+ echo "mkdir -m $dirmode -p -- $*"
+ exec mkdir -m "$dirmode" -p -- "$@"
+ else
+ # Clean up after NextStep and OpenStep mkdir.
+ for d in ./-m ./-p ./--version "./$dirmode";
+ do
+ test -d $d && rmdir $d
+ done
+ fi
+ ;;
+esac
+
+for file
+do
+ set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+ shift
+
+ pathcomp=
+ for d
+ do
+ pathcomp="$pathcomp$d"
+ case $pathcomp in
+ -*) pathcomp=./$pathcomp ;;
+ esac
+
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp"
+
+ mkdir "$pathcomp" || lasterr=$?
+
+ if test ! -d "$pathcomp"; then
+ errstatus=$lasterr
+ else
+ if test ! -z "$dirmode"; then
+ echo "chmod $dirmode $pathcomp"
+ lasterr=""
+ chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+ if test ! -z "$lasterr"; then
+ errstatus=$lasterr
+ fi
+ fi
+ fi
+ fi
+
+ pathcomp="$pathcomp/"
+ done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff --git a/libgpg-error-1.10/po/ChangeLog b/libgpg-error-1.10/po/ChangeLog
new file mode 100644
index 0000000..46959ce
--- /dev/null
+++ b/libgpg-error-1.10/po/ChangeLog
@@ -0,0 +1,139 @@
+2010-09-16 Jakub Bogusz <qboosh@pld-linux.org> (wk)
+
+ * pl.po: Update.
+
+2010-09-16 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.in.in: Upgrade to gettext-0.17.
+
+2010-05-06 Freek de Kruijf <f.de.kruijf@gmail.com> (wk)
+
+ * nl.po: New.
+
+2010-05-06 Clytie Siddall <clytie@riverland.net.au> (wk)
+
+ * vi.po: Update
+
+2009-08-20 Werner Koch <wk@g10code.com>
+
+ * LINGUAS: Add zh_CN, cs and it.
+ * cs.po: New.
+ * it.po: New.
+
+2009-08-20 Daniel Nylander <po@danielnylander.se> (wk)
+
+ * sv.po: Update
+
+2009-08-20 Aron Xu <happyaron.xu@gmail.com> (wk)
+
+ * zh_CN.po: New.
+
+2009-03-29 Moritz <moritz@gnu.org>
+
+ * de.po: Fixed typo.
+
+2008-11-12 Werner Koch <wk@g10code.com>
+
+ * de.po: Fixed typo.
+
+2007-10-29 Daniel Nylander <po@danielnylander.se> (wk)
+
+ * sv.po: Update.
+
+2007-10-29 Clytie Siddall <clytie@riverland.net.au> (wk)
+
+ * vi.po: Update.
+
+2007-10-29 Jakub Bogusz <qboosh@pld-linux.org> (wk)
+
+ * pl.po: Update.
+
+2007-08-23 Werner Koch <wk@g10code.com>
+
+ * de.po: Typo fix [bug#828].
+
+2007-02-26 Werner Koch <wk@g10code.com>
+
+ * sv.po: Update from Daniel.
+
+2006-12-22 Werner Koch <wk@g10code.com>
+
+ * LINGUAS, sv.po: Installed Swedish translation by Daniel Nylander.
+
+2006-11-23 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.in.in: Upgrade to gettext-0.15.
+
+2006-09-14 Werner Koch <wk@g10code.com>
+
+ * de.po: Updated.
+
+2006-09-08 Werner Koch <wk@g10code.com>
+
+ * pl.po: Updated.
+
+2006-03-14 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.in.in: Upgrade to gettext-0.14.5.
+ * Rules-quot: Upgrade to gettext-0.14.5.
+
+2006-01-11 Werner Koch <wk@g10code.com>
+
+ * vi.po: New.
+ * LINGUAS: Add vi.
+
+2005-09-29 Marcus Brinkmann <marcus@g10code.de>
+
+ * fr.po: New file.
+ * LINGUAS: Add fr.
+
+2005-07-04 Werner Koch <wk@g10code.com>
+
+ * ro.po: New.
+
+2005-06-16 Marcus Brinkmann <marcus@g10code.de>
+
+ * de.po: Apply typo fixes from Debian #313977.
+
+2004-04-22 Marcus Brinkmann <marcus@g10code.de>
+
+ * POTFILES.in: Add src/gpg-error.c.
+ * pl.po: Add messages for gpg-error.c.
+ * de.po: Likewise.
+
+ * pl.po: Update.
+
+2004-04-20 Marcus Brinkmann <marcus@g10code.de>
+
+ * LINGUAS: Add pl.
+ * pl.po: New file.
+
+2003-12-08 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.in.in: Upgrade to gettext-0.12.1.
+
+2003-11-14 Werner Koch <wk@gnupg.org>
+
+ * de.po: New.
+
+2003-05-15 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.in.in: New file, from gettext-0.11.5.
+ * boldquot.sed: New file, from gettext-0.11.5.
+ * en@boldquot.header: New file, from gettext-0.11.5.
+ * en@quot.header: New file, from gettext-0.11.5.
+ * insert-header.sin: New file, from gettext-0.11.5.
+ * quot.sed: New file, from gettext-0.11.5.
+ * remove-potcdate.sin: New file, from gettext-0.11.5.
+ * Rules-quot: New file, from gettext-0.11.5.
+
+
+ Copyright 2003, 2010 g10 Code GmbH
+
+ This file is free software; as a special exception the author gives
+ unlimited permission to copy and/or distribute it, with or without
+ modifications, as long as this notice is preserved.
+
+ This file is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+ implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/libgpg-error-1.10/po/LINGUAS b/libgpg-error-1.10/po/LINGUAS
new file mode 100644
index 0000000..1847d09
--- /dev/null
+++ b/libgpg-error-1.10/po/LINGUAS
@@ -0,0 +1,11 @@
+# Set of available languages.
+cs
+de
+fr
+it
+nl
+pl
+ro
+sv
+vi
+zh_CN
diff --git a/libgpg-error-1.10/po/Makefile.in.in b/libgpg-error-1.10/po/Makefile.in.in
new file mode 100644
index 0000000..fecf500
--- /dev/null
+++ b/libgpg-error-1.10/po/Makefile.in.in
@@ -0,0 +1,429 @@
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2007 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.17
+GETTEXT_MACRO_VERSION = 0.17
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datarootdir = @datarootdir@
+datadir = @datadir@
+localedir = @localedir@
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+
+# We use $(mkdir_p).
+# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
+# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
+# @install_sh@ does not start with $(SHELL), so we add it.
+# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined
+# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
+# versions, $(mkinstalldirs) and $(install_sh) are unused.
+mkinstalldirs = $(SHELL) @install_sh@ -d
+install_sh = $(SHELL) @install_sh@
+MKDIR_P = @MKDIR_P@
+mkdir_p = @mkdir_p@
+
+GMSGFMT_ = @GMSGFMT@
+GMSGFMT_no = @GMSGFMT@
+GMSGFMT_yes = @GMSGFMT_015@
+GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
+MSGFMT_ = @MSGFMT@
+MSGFMT_no = @MSGFMT@
+MSGFMT_yes = @MSGFMT_015@
+MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
+XGETTEXT_ = @XGETTEXT@
+XGETTEXT_no = @XGETTEXT@
+XGETTEXT_yes = @XGETTEXT_015@
+XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
+
+
+all: check-macro-version all-@USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# Ensure that the gettext macros and this Makefile.in.in are in sync.
+check-macro-version:
+ @test "$(GETTEXT_MACRO_VERSION)" = "@GETTEXT_MACRO_VERSION@" \
+ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version @GETTEXT_MACRO_VERSION@" 1>&2; \
+ exit 1; \
+ }
+
+# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
+# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
+# we don't want to bother translators with empty POT files). We assume that
+# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
+# In this case, stamp-po is a nop (i.e. a phony target).
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+ test ! -f $(srcdir)/$(DOMAIN).pot || \
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+ @test ! -f $(srcdir)/$(DOMAIN).pot || { \
+ echo "touch stamp-po" && \
+ echo timestamp > stamp-poT && \
+ mv stamp-poT stamp-po; \
+ }
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ if LC_ALL=C grep 'GNU @PACKAGE@' $(top_srcdir)/* 2>/dev/null | grep -v 'libtool:' >/dev/null; then \
+ package_gnu='GNU '; \
+ else \
+ package_gnu=''; \
+ fi; \
+ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
+ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
+ else \
+ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
+ fi; \
+ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
+ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ *) \
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) @XGETTEXT_EXTRA_OPTIONS@ \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --package-name="$${package_gnu}@PACKAGE@" \
+ --package-version='@VERSION@' \
+ --msgid-bugs-address="$$msgid_bugs_address" \
+ ;; \
+ esac
+ test ! -f $(DOMAIN).po || { \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+ else \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ else \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ }
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ if test -f "$(srcdir)/$${lang}.po"; then \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
+ else \
+ $(MAKE) $${lang}.po-create; \
+ fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ for file in Makevars; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+install-data-no: all
+install-data-yes: all
+ $(mkdir_p) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+ done; \
+ done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
+installdirs-data-no:
+installdirs-data-yes:
+ $(mkdir_p) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkdir_p) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
+ done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+ rm -f remove-potcdate.sed
+ rm -f stamp-poT
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+ rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ $(MAKE) update-po
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: stamp-po $(DISTFILES)
+ dists="$(DISTFILES)"; \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ dists="$$dists Makevars.template"; \
+ fi; \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ dists="$$dists $(DOMAIN).pot stamp-po"; \
+ fi; \
+ if test -f $(srcdir)/ChangeLog; then \
+ dists="$$dists ChangeLog"; \
+ fi; \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ if test -f $(srcdir)/ChangeLog.$$i; then \
+ dists="$$dists ChangeLog.$$i"; \
+ fi; \
+ done; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+ if test -f $$file; then \
+ cp -p $$file $(distdir) || exit 1; \
+ else \
+ cp -p $(srcdir)/$$file $(distdir) || exit 1; \
+ fi; \
+ done
+
+update-po: Makefile
+ $(MAKE) $(DOMAIN).pot-update
+ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+ exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+ cd $(srcdir); \
+ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@
+ cd $(top_builddir) \
+ && $(SHELL) ./config.status $(subdir)/$@.in po-directories
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libgpg-error-1.10/po/Makevars b/libgpg-error-1.10/po/Makevars
new file mode 100644
index 0000000..5ba1ad0
--- /dev/null
+++ b/libgpg-error-1.10/po/Makevars
@@ -0,0 +1,42 @@
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = g10 Code GmbH
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS = translations@gnupg.org
+
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
diff --git a/libgpg-error-1.10/po/POTFILES.in b/libgpg-error-1.10/po/POTFILES.in
new file mode 100644
index 0000000..2a3aabc
--- /dev/null
+++ b/libgpg-error-1.10/po/POTFILES.in
@@ -0,0 +1,14 @@
+# List of source files containing translatable strings.
+# Copyright 2003 g10 Code GmbH
+#
+# This file is free software; as a special exception the author gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# This file is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+src/err-sources.h
+src/err-codes.h
+src/gpg-error.c
diff --git a/libgpg-error-1.10/po/Rules-quot b/libgpg-error-1.10/po/Rules-quot
new file mode 100644
index 0000000..9c2a995
--- /dev/null
+++ b/libgpg-error-1.10/po/Rules-quot
@@ -0,0 +1,47 @@
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+ $(MAKE) en@quot.po-update
+en@boldquot.po-create:
+ $(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+en@quot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
diff --git a/libgpg-error-1.10/po/boldquot.sed b/libgpg-error-1.10/po/boldquot.sed
new file mode 100644
index 0000000..4b937aa
--- /dev/null
+++ b/libgpg-error-1.10/po/boldquot.sed
@@ -0,0 +1,10 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“[1m/g
+s/”/[0m”/g
+s/‘/‘[1m/g
+s/’/[0m’/g
diff --git a/libgpg-error-1.10/po/cs.gmo b/libgpg-error-1.10/po/cs.gmo
new file mode 100644
index 0000000..cc7b8cd
--- /dev/null
+++ b/libgpg-error-1.10/po/cs.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/cs.po b/libgpg-error-1.10/po/cs.po
new file mode 100644
index 0000000..b383110
--- /dev/null
+++ b/libgpg-error-1.10/po/cs.po
@@ -0,0 +1,1111 @@
+# Czech translation of libgpg-error.
+# Copyright (C) 2009 Free Software Foundation, Inc.
+# This file is distributed under the same license as the libgpg-error package.
+# Petr Pisar <petr.pisar@atlas.cz>, 2009.
+#
+# certificate chain → řetezec (posloupnost) certifikátů
+# keybox → Schránka (na klíče)
+# keyring → klíčenka (jen na PGP klíče)
+# armor → ASCII (podoba)
+# encoding → kódování
+# encryption → šifrování
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.7\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2009-06-23 14:10+0200\n"
+"Last-Translator: Petr Pisar <petr.pisar@atlas.cz>\n"
+"Language-Team: Czech <translation-team-cs@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "Zdroj nezadán"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GnuPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GpgSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "GPG agent"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr "Pinentry"
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+# XXX: Konzistentní s gnupg2
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr "Schránka"
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr "Dirmngr"
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr "GPA"
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr "Kleopatra"
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr ""
+
+#: src/err-sources.h:43
+msgid "Any source"
+msgstr "Nespecifikovaný zdroj"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "Uživatelem definovaný zdroj 1"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "Uživatelem definovaný zdroj 2"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "Uživatelem definovaný zdroj 3"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "Uživatelem definovaný zdroj 4"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "Neznámý zdroj"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "Úspěch"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "Obecná chyba"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "Neznámý packet"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "Neznámá verze v packetu"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "Neplatný algoritmus veřejného klíče"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "Neplatný hashovací algoritmus"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "Chybný veřejný klíč"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "Chybný tajný klíč"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "Chybný podpis"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "Žádný veřejný klíč"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "Chyba kontrolního součtu"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "Chybné heslo"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "Neplatný šifrovací algoritmus"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr "Klíčenka otevřena"
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "Neplatný packet"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr "Neplatný ASCII zápis"
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "Žádný identifikátor uživatele"
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "Žádný tajný klíč"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "Použit špatný tajný klíč"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "Chybný klíč relace"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "Neznámý kompresní algoritmus"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "Číslo není prvočíslo"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "Neplatná kódovací metoda"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "Neplatné šifrovací schéma"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "Neplatné podpisové schéma"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "Neplatný atribut"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "Žádná hodnota"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "Nenalezeno"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "Hodnota nenalezena"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "Chyba syntaxe"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "Chybná hodnota MPI"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "Neplatné heslo"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr "Neplatní podpisová třída"
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "Zdroje vyčerpány"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "Neplatná klíčenka"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "Chyba databáze důvěry"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "Chybný certifikát"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "Neplatné ID uživatele"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "Neočekávaná chyba"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "Rozpor v času"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "Chyba serveru s klíči"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "Špatný algoritmus veřejného klíče"
+
+# This is errror nuber 42 :)
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr "Pocta D. A."
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "Slabý šifrovací klíč"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "Neplatná délka klíče"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "Neplatný argument"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "Chyba syntaxe v URI"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "Neplatné URI"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "Chyba sítě"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "Neznámý stroj"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "Sebetestování selhalo"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "Data nešifrována"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "Data nezpracována"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "Nepoužitelný veřejný klíč"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "Nepoužitelný tajný klíč"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "Neplatná hodnota"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "Chybný řetězec certifikátů"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "Chybí certifikát"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "Žádná data"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "Chyba"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "Nepodporováno"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "Neplatný kód operace"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "Čas vypršel"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "Vnitřní chyba"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "EOF (gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "Neplatný objekt"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "Dodaný objekt je příliš krátký"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "Dodaný objekt je příliš dlouhý"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "V objektu chybí položka"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "Neimplementováno"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr "Neslučitelné použití"
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "Neplatný režim šifry"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr "Neplatný příznak"
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr "Neplatný deskriptor"
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "Výsledek zkrácen"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "Neúplný řádek"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "Neplatná odpověď"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "Agent neběží"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "chyba agenta"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "Neplatná data"
+
+#: src/err-codes.h:108
+msgid "Unspecific Assuan server fault"
+msgstr "Neurčená porucha serveru Assuan"
+
+#: src/err-codes.h:109
+msgid "General Assuan error"
+msgstr "Obecná chyba Assuanu"
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr "Neplatný klíč relace"
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr "Neplatný S-výraz"
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr "Nepodporovaný algoritmus"
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr "Žádný pinentry"
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr "chyba pinentry"
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr "Špatný PIN"
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr "Neplatné jméno"
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr "Chybná data"
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr "Neplatný parametr"
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr "Špatná karta"
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr "Žádný dirmngr"
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr "chyba dirmngr"
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr "Certifikát odvolán"
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr "Není znám žádný CRL"
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr "Příliš starý CRL"
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr "Příliš dlouhý řádek"
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr "Nedůvěřuje se"
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr "Operace zrušena"
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr "Chybný certifikát autority"
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr "Certifikátu vypršela platnost"
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr "Certifikát je příliš mladý"
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr "Nepodporovaný certifikát"
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr "Neznámý S-výraz"
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr "Nepodporovaná ochrana"
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr "Poškozená ochrana"
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr "Nejednoznačné jméno"
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr "Chyba karty"
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr "Vyžadován reset karty"
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr "Karta odstraněna"
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr "Neplatná karta"
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr "Karta není přítomna"
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr "Žádná aplikace PKCS15"
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr "Nepotvrzeno"
+
+# Nastavení nebo nastavování?
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr "Chyba konfigurace"
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr "Politika se neshoduje"
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr "Neplatný index"
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr "Neplatné ID"
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr "Žádný démon pro čipové karty"
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr "Chyba démona pro čipové karty"
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr "Nepodporovaný protokol"
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr "Chybná metoda PINu"
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr "Karta neinicializovaná"
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr "Nepodporovaná operace"
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr "Špatné použití karty"
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr "Nic nenalezeno"
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr "Špatný typ blobu"
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr "Chybí hodnota"
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr "Hardwarový problém"
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr "PIN blokován"
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr "Podmínky použití nesplněny"
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr "PINy nejsou synchronizovány"
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr "Neplatný CRL"
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr "Chyba BER"
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr "Neplatné BER"
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr "Prvek nenalezen"
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr "Identifikátor nenalezen"
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr "Neplatná značka"
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr "Neplatná délka"
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr "Neplatné informace o klíči"
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr "Neočekávaná značka"
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr "Nekódováno v DER"
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr "Žádný objekt CMS"
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr "Neplatný objekt CMS"
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr "Neznámý objekt CMS"
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr "Nepodporovaný objekty CMS"
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr "Nepodporované kódování"
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr "Nepodporovaná verze CMS"
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr "Neznámý algoritmus"
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr "Neplatná kryptografická jednotka"
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr "Veřejnému klíči se nedůvěřuje"
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr "Dešifrování selhalo"
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr "Klíči vypršela platnost"
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr "Podpisu vypršela platnost"
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr "Chyba kódování"
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr "Neplatná stav"
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr "Zdvojená hodnota"
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr "Chybí akce"
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr "Modul ASN.1 nenalezen"
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr "Neplatný řetězec OID"
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr "Neplatný čas"
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr "Neplatný objekt CRL"
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr "Nepodporovaná verze CRL"
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr "Neplatný objekt certifikátu"
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr "Neznámé jméno"
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr "Funkce locale selhala"
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr "Neuzamčeno"
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr "Narušení protokolu"
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr "Neplatný MAC"
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr "Neplatný požadavek"
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr "Neznámé rozšíření"
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr "Neznámé kritické rozšíření"
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr "Zamčeno"
+
+#: src/err-codes.h:202
+msgid "Unknown option"
+msgstr "Neznámý parametr"
+
+#: src/err-codes.h:203
+msgid "Unknown command"
+msgstr "Neznámý příkaz"
+
+#: src/err-codes.h:204
+msgid "Not operational"
+msgstr "Nefunkční"
+
+#: src/err-codes.h:205
+msgid "No passphrase given"
+msgstr "Heslo nezadáno"
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr "PIN nezadán"
+
+#: src/err-codes.h:207
+#, fuzzy
+msgid "Not enabled"
+msgstr "Neuzamčeno"
+
+#: src/err-codes.h:208
+#, fuzzy
+msgid "No crypto engine"
+msgstr "Neplatná kryptografická jednotka"
+
+#: src/err-codes.h:209
+#, fuzzy
+msgid "Missing key"
+msgstr "Chybí hodnota"
+
+#: src/err-codes.h:210
+#, fuzzy
+msgid "Too many objects"
+msgstr "Žádný objekt CMS"
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr ""
+
+#: src/err-codes.h:212
+#, fuzzy
+msgid "Not initialized"
+msgstr "Karta neinicializovaná"
+
+#: src/err-codes.h:213
+#, fuzzy
+msgid "Missing issuer certificate"
+msgstr "Chybí certifikát"
+
+#: src/err-codes.h:214
+#, fuzzy
+msgid "Operation fully cancelled"
+msgstr "Operace zrušena"
+
+#: src/err-codes.h:215
+msgid "Operation not yet finished"
+msgstr "Operace ještě neskončila"
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr "Vyrovnávací paměť je příliš malá"
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr "Neplatné určení délky v S-výrazu"
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr "Řetězec v S-výrazu je příliš dlouhý"
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr "Nepárové závorky v S-výrazu"
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr "S-výraz není kanonický"
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr "Chybný znak v S-výrazu"
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr "Chybné uzavření do uvozovek v S-výrazu"
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr "Nulová předpona v S-výrazu"
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr "Vnořené pokyny pro zobrazení v S-výrazu"
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr "Neodpovídající pokyny pro zobrazení"
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr "Neočekávaná vyhrazená interpunkce v S-výrazu"
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr "Chybný šestnáctkový znak v S-výrazu"
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr "Lichá šestnáctková čísla v S-výrazu"
+
+#: src/err-codes.h:229
+msgid "Bad octal character in S-expression"
+msgstr "Chybný osmnáctkový znak v S-výrazu"
+
+#: src/err-codes.h:230
+msgid "General IPC error"
+msgstr "Obecná chyba IPC"
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr "IPC volání accept (přijmout) selhalo"
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr "IPC volání connect (připojit) selhalo"
+
+#: src/err-codes.h:233
+msgid "Invalid IPC response"
+msgstr "Neplatná odpověď IPC"
+
+#: src/err-codes.h:234
+msgid "Invalid value passed to IPC"
+msgstr "Neplatná hodnota předaná do IPC"
+
+#: src/err-codes.h:235
+msgid "Incomplete line passed to IPC"
+msgstr "Neúplný řádek předán do IPC"
+
+#: src/err-codes.h:236
+msgid "Line passed to IPC too long"
+msgstr "Řádek předaný do IPC je příliš dlouhý"
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr "Vnořené příkazy IPC"
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr "Žádná data zpětného volání v IPC"
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr "Žádné dotazovací zpětné volání v IPC"
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr "Není serverem IPC"
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr "Není klientem IPC"
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr "Problém se spuštěním serveru IPC"
+
+#: src/err-codes.h:243
+msgid "IPC read error"
+msgstr "Chyba čtení IPC"
+
+#: src/err-codes.h:244
+msgid "IPC write error"
+msgstr "Chyba zápisu IPC"
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr "Příliš mnoho data pro vrstvu IPC"
+
+#: src/err-codes.h:246
+msgid "Unexpected IPC command"
+msgstr "Neočekávaný příkaz IPC"
+
+#: src/err-codes.h:247
+msgid "Unknown IPC command"
+msgstr "Neznámý příkaz IPC"
+
+#: src/err-codes.h:248
+msgid "IPC syntax error"
+msgstr "Chyba syntaxe IPC"
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr "Volání IPC bylo zrušeno"
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr "Žádný zdroj vstupu pro IPC"
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr "Žádný zdroj výstupu pro IPC"
+
+#: src/err-codes.h:252
+msgid "IPC parameter error"
+msgstr "Chyba parametru IPC"
+
+#: src/err-codes.h:253
+msgid "Unknown IPC inquire"
+msgstr "Neznámý dotaz IPC"
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr "Uživatelem definovaný chybový kód 1"
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr "Uživatelem definovaný chybový kód 2"
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr "Uživatelem definovaný chybový kód 3"
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr "Uživatelem definovaný chybový kód 4"
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr "Uživatelem definovaný chybový kód 5"
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr "Uživatelem definovaný chybový kód 6"
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr "Uživatelem definovaný chybový kód 7"
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr "Uživatelem definovaný chybový kód 8"
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr "Uživatelem definovaný chybový kód 9"
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr "Uživatelem definovaný chybový kód 10"
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr "Uživatelem definovaný chybový kód 11"
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr "Uživatelem definovaný chybový kód 12"
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr "Uživatelem definovaný chybový kód 13"
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr "Uživatelem definovaný chybový kód 14"
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr "Uživatelem definovaný chybový kód 15"
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr "Uživatelem definovaný chybový kód 16"
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr "Chyba systému bez čísla chyby (errno)"
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr "Neznámá chyba systému"
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr "Konec souboru"
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr "Neznámý kód chyby"
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr "Použití: %s CHYBA_GPG […]\n"
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr "%s: pozor: %s nebylo možné rozpoznat\n"
diff --git a/libgpg-error-1.10/po/de.gmo b/libgpg-error-1.10/po/de.gmo
new file mode 100644
index 0000000..5fadc66
--- /dev/null
+++ b/libgpg-error-1.10/po/de.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/de.po b/libgpg-error-1.10/po/de.po
new file mode 100644
index 0000000..ffa10a4
--- /dev/null
+++ b/libgpg-error-1.10/po/de.po
@@ -0,0 +1,1101 @@
+# de.po - German strings for libgpg-error
+# Copyright (C) 2003 g10 Code GmbH
+# This file is distributed under the terms of the GNU LGPL v2.1 or later.
+# Werner Koch <wk@gnupg.org>, 2003.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error-1.9\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2010-09-16 15:16+0200\n"
+"Last-Translator: Werner Koch <wk@gnupg.org>\n"
+"Language-Team: none\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "Quelle nicht angegeben"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GPGSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "GPG Agent"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr "Pinentry"
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr "Keybox"
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr "Dirmngr"
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr "GPA"
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr "Kleopatra"
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr "G13"
+
+#: src/err-sources.h:43
+msgid "Any source"
+msgstr "Unspezifische Quelle"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "Benutzerdefinierte Quelle 1"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "Benutzerdefinierte Quelle 2"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "Benutzerdefinierte Quelle 3"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "Benutzerdefinierte Quelle 4"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "Unbekannte Quelle"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "Erfolg"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "Allgemeiner Fehler"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "Unbekanntes Paket"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "Unbekannte Version im Paket"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "Ungültiges Public-Key-Verfahren"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "Ungültige Hashmethode"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "Fehlerhafter öffentlicher Schlüssel"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "Fehlerhafter geheimer Schlüssel"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "Falsche Unterschrift"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "Kein öffentlicher Schlüssel"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "Prüfsummenfehler"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "Falsche Passphrase"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "Ungültiges Verschlüsselungsverfahren"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr "Schlüsselbund kann nicht geöffnet werden"
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "Ungültiges Paket"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr "Ungültige ASCII-Hülle"
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "Keine User-ID"
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "Kein geheimer Schlüssel"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "Falscher geheimer Schlüssel benutzt"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "Fehlerhafte Sitzungsschlüssel"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "Unbekanntes Komprimierungsverfahren"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "Zahl ist nicht prim"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "Ungültiges Kodierungsverfahren"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "Ungültiges Verschlüsselungsschema"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "Ungültiges Signaturschema"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "Ungültiges Attribut"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "Kein Wert"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "Nicht gefunden"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "Wert nicht gefunden"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "Syntaxfehler"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "Fehlerhafter MPI Wert"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "Ungültige Passphrase"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr "Ungültige Signaturklasse"
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "Ressourcen erschöpft"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "Ungültiger Schlüsselbund"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "Fehler in der 'Trust'-Datenbank"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "Fehlerhaftes Zertifikat"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "Ungültige User-ID"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "Unerwarteter Fehler"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "Zeitangaben differieren"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "Schlüsselserverfehler"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "Falsches Public-Key-Verfahren"
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr "Tribut an D. A."
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "Unsicherer Schlüssel"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "Ungültige Schlüssellänge"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "Ungültiges Argument"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "Syntaxfehler im URI"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "Ungültiger URI"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "Netzwerkfehler"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "Unbekannter Rechner"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "Selbstprüfung fehlgeschlagen"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "Daten sind nicht verschlüsselt"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "Daten wurden nicht verarbeitet"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "Unbrauchbarer öffentlicher Schlüssel"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "Unbrauchbarer geheimer Schlüssel"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "Ungültiger Wert"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "Fehlerhafte Zertifikatkette"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "Fehlendes Zertifikat"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "Keine Daten"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "Bug (Programmfehler)"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "Nicht unterstützt"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "Ungültiger Verarbeitungscode"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "Zeitüberschreitung"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "Interner Fehler"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "EOF (in gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "Ungültiges Objekt"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "Objekt ist zu kurz"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "Objekt ist zu groß"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "Fehlendes Feld im Objekt"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "Nich implementiert"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr "Zwiespältige Benutzung"
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "Ungültiger Verschlüsselungsmodus"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr "Ungültiges Flag"
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr "Ungültiger Handle"
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "Ausgabe abgeschnitten"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "Unvollständige Zeile"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "Ungültige Antwort"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "Agent läuft nicht"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "Fehler beim Agenten"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "Ungültige Daten"
+
+#: src/err-codes.h:108
+msgid "Unspecific Assuan server fault"
+msgstr "Unspezifischer Assuan Serverfehler"
+
+#: src/err-codes.h:109
+msgid "General Assuan error"
+msgstr "Allgemeiner Assuan Fehler"
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr "Ungültiger Sitzungsschlüssel"
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr "Ungültige S-expression"
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr "Nicht unterstütztes Verfahren"
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr "Kein Pinentry"
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr "Fehler in der Pinentry"
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr "Falsche PIN"
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr "Ungültiger Name"
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr "Fehlerhafte Daten"
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr "Ungültiger Parameter"
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr "Falsche Karte"
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr "Kein Dirmngr"
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr "Fehler im Dirmngr"
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr "Zertifikat ist widerrufen"
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr "Keine CRL bekannt"
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr "CRL ist zu alt"
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr "Zeile ist zu lang"
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr "Nicht vertrauenswürdig"
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr "Verarbeitung wurde abgebrochen"
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr "Fehlerhaftes CA-Zertifikat"
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr "Zertifikat abgelaufen"
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr "Zertifikat ist noch nicht gültig"
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr "Nicht unterstütztes Zertifikat"
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr "Unbekannte S-expression"
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr "Nicht unterstütztes Schutzverfahren"
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr "Beschädigter Schutz"
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr "Mehrdeutiger Name"
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr "Kartenfehler"
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr "Karte wurde zurückgesetzt"
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr "Karte wurde entfernt"
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr "Ungültige Karte"
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr "Karte nicht vorhanden"
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr "Kein PKCS#15 Anwendung"
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr "Nicht bestätigt"
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr "Konfigurationsfehler"
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr "Richtlinien stimmen nicht überein"
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr "Ungültiger Index"
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr "Ungültige ID"
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr "Kein Karten-Daemon"
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr "Fehler im Karten-Daemon"
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr "Nicht unterstütztes Protokoll"
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr "Falsche PIN Methode"
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr "Karte ist nicht initialisiert"
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr "Nicht unterstützte Verarbeitungsaufgabe"
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr "Falsche Schlüsselnutzung"
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr "Nichts gefunden"
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr "Falscher BLOB-Typ"
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr "Fehlender Wert"
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr "Problem mit der Hardware"
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr "PIN ist blockiert"
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr "Nutzungsvorraussetzungen nicht erfüllt"
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr "PINs sind nicht syncronsiert"
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr "Ungültige CRL"
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr "BER Fehler"
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr "Ungültige BER"
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr "Element nicht gefunden"
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr "Indentifier nicht gefunden"
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr "Ungültiges \"Tag\""
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr "Ungültige Länge"
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr "Ungültige Key-Info"
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr "Unerwartetes \"Tag\""
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr "Nicht DER kodiert"
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr "Kein CMS Objekt"
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr "Ungültiges CMS Objekt"
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr "Unbekanntes CMS Objekt"
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr "Nicht unterstütztes CMS Objekt"
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr "Nicht unterstützte Kodierung"
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr "Nicht unterstützte CMS Version"
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr "Unbekanntes Verfahren"
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr "Ungültige Krypto-Engine"
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr "Öffentlicher Schlüssel ist nicht vertrauenswürdig"
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr "Entschlüsselung fehlgeschlagen"
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr "Schlüssel abgelaufen"
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr "Unterschrift abgelaufen"
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr "Kodierungsproblem"
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr "Ungültiger Status"
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr "Doppelter Wert"
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr "Aktion fehlt"
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr "ASN.1 Modul nicht gefunden"
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr "Ungültige OID Zeichenkette"
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr "Ungültige Zeit"
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr "Ungültiges CRL Objekt"
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr "Nicht unterstützte CRL Version"
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr "Ungültiges Zertifikatsobjekt"
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr "Unbekannter Name"
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr "Eine \"locale\" Funktion ist fehlgeschlagen"
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr "Nicht gesperrt"
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr "Protokollverletzung"
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr "Ungültiger MAC"
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr "Ungültiger Request"
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr "Unbekannte Erweiterung"
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr "Unbekannte kritische Erweiterung"
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr "Gesperrt"
+
+#: src/err-codes.h:202
+msgid "Unknown option"
+msgstr "Unbekannte Option"
+
+#: src/err-codes.h:203
+msgid "Unknown command"
+msgstr "Unbekanntes Kommando"
+
+#: src/err-codes.h:204
+msgid "Not operational"
+msgstr "Nicht betriebsbereit"
+
+#: src/err-codes.h:205
+msgid "No passphrase given"
+msgstr "Keine Passphrase angegeben"
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr "Keine PIN angegeben"
+
+#: src/err-codes.h:207
+msgid "Not enabled"
+msgstr "Nicht engeschaltet"
+
+#: src/err-codes.h:208
+msgid "No crypto engine"
+msgstr "Keine Krypto-Engine"
+
+#: src/err-codes.h:209
+msgid "Missing key"
+msgstr "Fehlender Schlüssel"
+
+#: src/err-codes.h:210
+msgid "Too many objects"
+msgstr "Zu viele Objekte"
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr "Limit erreicht"
+
+#: src/err-codes.h:212
+msgid "Not initialized"
+msgstr "Initialisierung nicht durchgeführt"
+
+# "in der Kette" ist part of the message because many users know about
+# certificate chains and thus that keyword might give them a good hint
+# what might be wrong.
+#: src/err-codes.h:213
+msgid "Missing issuer certificate"
+msgstr "Fehlendes Herausgeberzertifikat in der Kette"
+
+#: src/err-codes.h:214
+#, fuzzy
+msgid "Operation fully cancelled"
+msgstr "Verarbeitung wurde abgebrochen"
+
+#: src/err-codes.h:215
+msgid "Operation not yet finished"
+msgstr "Verarbeitung ist noch nicht beendet"
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr "Datenpuffer zu kurz"
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr "Ungültige Längeangabe in der S-expression"
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr "Zeichenkette in S-expression zu lang"
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr "Nich übereinstimmende Klammern in S-expression"
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr "S-expression ist nicht kanonisch"
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr "Fehlerhaftes Zeichen in S-expression"
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr "Fehlerhafte Zitierung in S-expression"
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr "Null-Präfix in S-expression"
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr "Verschachtelte \"Hints\" in S-expression"
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr "Nicht übereinstimmende \"Hints\""
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr "Unerwartetes reserviertes Zeichen in S-expression"
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr "Falsches Hex-Zeichen in S-expression"
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr "Ungerade Anzahl von Hex-Zeichen in S-expression"
+
+#: src/err-codes.h:229
+msgid "Bad octal character in S-expression"
+msgstr "Falsches Oktal-Zeichen in S-expression"
+
+#: src/err-codes.h:230
+msgid "General IPC error"
+msgstr "Allgemeiner IPC Fehler"
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr "IPC \"accept\" Aufruf fehlgeschlagen"
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr "IPC \"connect\" Aufruf fehlgeschlagen"
+
+#: src/err-codes.h:233
+msgid "Invalid IPC response"
+msgstr "Ungültige IPC Antwort"
+
+#: src/err-codes.h:234
+msgid "Invalid value passed to IPC"
+msgstr "Ungültiger Wert an IPC übergeben"
+
+#: src/err-codes.h:235
+msgid "Incomplete line passed to IPC"
+msgstr "Unvollständige Zeile an IPC übergeben"
+
+#: src/err-codes.h:236
+msgid "Line passed to IPC too long"
+msgstr "An die IPC übergebene Zeile ist zu lang"
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr "Verschachtelte IPC Kommandos"
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr "Kein Daten vom IPC \"Callback\""
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr "Kein \"Inquire\" \"Callback\" für IPC gesetzt"
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr "Kein IPC Server"
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr "Kein IPC Client"
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr "Problem beim Starten des IPC Servers"
+
+#: src/err-codes.h:243
+msgid "IPC read error"
+msgstr "IPC Lesefehler"
+
+#: src/err-codes.h:244
+msgid "IPC write error"
+msgstr "IPC Schreibfehler"
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr "Zu viele Daten für das IPC Ebene"
+
+#: src/err-codes.h:246
+msgid "Unexpected IPC command"
+msgstr "Unerwartetes IPC Kommando"
+
+#: src/err-codes.h:247
+msgid "Unknown IPC command"
+msgstr "Unbekanntes IPC Kommando"
+
+#: src/err-codes.h:248
+msgid "IPC syntax error"
+msgstr "IPC Syntaxfehler"
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr "Der IPC Aufruf wurde abgebrochen"
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr "Eingabequelle für IPC fehlt"
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr "Ausgabesenke für IPC fehlt"
+
+#: src/err-codes.h:252
+msgid "IPC parameter error"
+msgstr "IPC Parameterfehler"
+
+#: src/err-codes.h:253
+msgid "Unknown IPC inquire"
+msgstr "Unbekanntes IPC \"Inquire\""
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr "Benutzerdefinierter Fehlercode 1"
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr "Benutzerdefinierter Fehlercode 2"
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr "Benutzerdefinierter Fehlercode 3"
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr "Benutzerdefinierter Fehlercode 4"
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr "Benutzerdefinierter Fehlercode 5"
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr "Benutzerdefinierter Fehlercode 6"
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr "Benutzerdefinierter Fehlercode 7"
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr "Benutzerdefinierter Fehlercode 8"
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr "Benutzerdefinierter Fehlercode 9"
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr "Benutzerdefinierter Fehlercode 10"
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr "Benutzerdefinierter Fehlercode 11"
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr "Benutzerdefinierter Fehlercode 12"
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr "Benutzerdefinierter Fehlercode 13"
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr "Benutzerdefinierter Fehlercode 14"
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr "Benutzerdefinierter Fehlercode 15"
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr "Benutzerdefinierter Fehlercode 16"
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr "Systemfehler ohne gesetzten Systemfehlercode"
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr "Unbekannter Systemfehler"
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr "Dateiende"
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr "Unbekannter Fehlercode"
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr "Aufruf: %s GPG-FEHLER [...]\n"
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr "%s: Warnung: %s konnte nicht erkannt werden\n"
+
+#~ msgid "Assuan error"
+#~ msgstr "Fehler in Assuan"
diff --git a/libgpg-error-1.10/po/en@boldquot.header b/libgpg-error-1.10/po/en@boldquot.header
new file mode 100644
index 0000000..fedb6a0
--- /dev/null
+++ b/libgpg-error-1.10/po/en@boldquot.header
@@ -0,0 +1,25 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
diff --git a/libgpg-error-1.10/po/en@quot.header b/libgpg-error-1.10/po/en@quot.header
new file mode 100644
index 0000000..a9647fc
--- /dev/null
+++ b/libgpg-error-1.10/po/en@quot.header
@@ -0,0 +1,22 @@
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
diff --git a/libgpg-error-1.10/po/fr.gmo b/libgpg-error-1.10/po/fr.gmo
new file mode 100644
index 0000000..d3ecac7
--- /dev/null
+++ b/libgpg-error-1.10/po/fr.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/fr.po b/libgpg-error-1.10/po/fr.po
new file mode 100644
index 0000000..782ffd7
--- /dev/null
+++ b/libgpg-error-1.10/po/fr.po
@@ -0,0 +1,1124 @@
+# French translation.
+# Copyright (C) YEAR g10 Code GmbH
+# This file is distributed under the same license as the libgpg-error package.
+# Stephane Roy <sroy@j2n.net>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.0\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2009-08-20 09:04+0200\n"
+"Last-Translator: Stephane Roy <sroy@j2n.net>\n"
+"Language-Team: French <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "Source non spécifiée"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GnuPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GpgSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "GPG Agent"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr "Pinentry"
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr "Keybox"
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr "Dirmngr"
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr ""
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr ""
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr ""
+
+#: src/err-sources.h:43
+#, fuzzy
+msgid "Any source"
+msgstr "Source inconnue"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "Source 1 définie par l'utilisateur"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "Source 2 définie par l'utilisateur"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "Source 3 définie par l'utilisateur"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "Source 4 définie par l'utilisateur"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "Source inconnue"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "Succès"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "Erreur génerale"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "Paquet inconnu"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "Version inconnue dans le paquet"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "Algorithme à clé publique invalide"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "Algorithme de résumé invalide"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "Mauvaise clé publique"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "Mauvaise clé secrète"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "Mauvaise signature"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "Pas de clé publique"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "Erreur de somme de contrôle"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "Mauvaise phrase de passe"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "Algorithme de chiffrement invalide"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr "Porte-clés ouvert"
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "Paquet invalide"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr "Armure invalide"
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "Pas d'ID d'utilisateur"
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "Pas de clé secrète"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "Mauvaise clé secrète utilisé"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "Mauvaise clé de session"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "Algorithme de compression inconnu"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "Ce nombre n'est pas premier"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "Méthode d'encodage invalide"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "Schéma de chiffrement invalide"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "Schéma de signature invalide"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "Attribut invalide"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "Pas de valeur"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "Non trouvé"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "Valeur non trouvée"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "Erreur de syntaxe"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "Mauvaise valeur MPI"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "Phrase de passe invalide"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr "Classe de signature invalide"
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "Ressources épuisées"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "Porte-clés invalide"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "Erreur de DB de confiance"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "Mauvais certificat"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "ID d'utilisateur invalide"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "Erreur inattendue"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "Conflit de temps"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "Erreur de serveur de clé"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "Mauvais algorithme à clé publique"
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr "Hommage à D. A."
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "Clé de chiffrement faible"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "Longueur de clé invalide"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "Argument invalide"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "Erreur de syntaxe dans l'URI"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "URI invalide"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "Erreur réseau"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "Hôte inconnu"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "Autotest échoué"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "Donnée non cryptée"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "Donnée non traitée"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "Clé publique inutilisable"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "Clé privée inutilisable"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "Valeur invalide"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "Mauvaise chaîne de certificat"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "Certificat manquant"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "Pas de données"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "Bogue"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "Non supporté"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "Code d'opération invalide"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "Délai d'attente"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "Erreur interne"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "EOF (gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "Objet invalide"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "L'objet fourni est trop petit"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "L'objet fourni est trop grand"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "Élément manquant dans l'objet"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "Non implémenté"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr "Usage conflictuel"
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "Mode de chiffrement invalide"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr "Drapeau invalide"
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr "Gestion non valide"
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "Résultat tronqué"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "Ligne incomplète"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "Réponse invalide"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "Pas d'agent en cours d'exécution"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "erreur d'agent"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "Donnée invalide"
+
+#: src/err-codes.h:108
+#, fuzzy
+msgid "Unspecific Assuan server fault"
+msgstr "Faute de serveur assuan"
+
+#: src/err-codes.h:109
+#, fuzzy
+msgid "General Assuan error"
+msgstr "Erreur génerale"
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr "Clé de session invalide"
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr "S-expression invalide"
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr "Algorithme non supporté"
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr "Pas de pinentry"
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr "erreur de pinentry"
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr "Mauvais PIN"
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr "Nom invalide"
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr "Mauvaise donnée"
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr "Paramètre invalide"
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr "Mauvaise carte"
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr "Pas de dirmngr"
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr "Erreur de dirmngr"
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr "Certificat révoqué"
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr "Pas de CRL connu"
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr "CRL trop vieux"
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr "Ligne trop longue"
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr "Pas confiance"
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr "Opération annulée"
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr "Mauvais CA de certificat"
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr "Certificat expiré"
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr "Certificat trop jeune"
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr "Certificat non supporté"
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr "S-expression inconnue"
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr "Protection non supportée"
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr "Protection corrompue"
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr "Nom ambigü"
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr "Erreur de carte"
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr "Ré-initialisation de la carte requise"
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr "Carte enlevée"
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr "Carte invalide"
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr "Carte non présente"
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr "Application non PKCS15"
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr "Non confirmé"
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr "Erreur de configuration"
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr "Des directives ne correspondent pas"
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr "Index invalide"
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr "ID invalide"
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr "Pas de service SmartCard"
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr "Erreur de service SmartCard"
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr "Protocole non supporté"
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr "Mauvaise méthode PIN"
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr "Carte non initialisée"
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr "Opération non supportée"
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr "Mauvaise utilisation de la clé"
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr "Rien de trouvé"
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr "Mauvais type de blob"
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr "Valeur manquante"
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr "Problème matériel"
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr "PIN bloqué"
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr "Conditions d'usage non satisfaites"
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr "Les PINs ne sont pas synchrones"
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr "CRL invalide"
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr "Erreur de BER"
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr "BER invalide"
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr "Élément non trouvé"
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr "Identifiant non trouvé"
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr "Balise invalide"
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr "Longueur invalide"
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr "Information de clé invalide"
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr "Balise inattendue"
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr "Non DER encodé"
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr "Pas d'objet CMS"
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr "Objet CMS invalide"
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr "Objet CMS inconnu"
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr "Objet CMS non supporté"
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr "Codage non supporté"
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr "Version de CMS non supporté"
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr "Algorithme inconnu"
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr "Moteur crypto invalide"
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr "Pas confiance dans la clé publique"
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr "Échec de déchiffrage"
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr "Clé expiré"
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr "Signature expiré"
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr "Problème d'encodage"
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr "État invalide"
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr "Valeur dupliquée"
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr "Action manquante"
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr "Module ASN.1 non trouvé"
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr "Chaine OID invalide"
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr "Temps invalide"
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr "Objet CRL invalide"
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr "Version de CRL non supportée"
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr "Objet certificat invalide"
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr "Non inconnu"
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr "Une fonction locale a échoué"
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr "Non verrouillé"
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr "Violation de protocole"
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr "MAC invalide"
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr "Requête invalide"
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr "Extension inconnue"
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr "Extension critique inconnue"
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr "Verrouillé"
+
+#: src/err-codes.h:202
+#, fuzzy
+msgid "Unknown option"
+msgstr "Extension inconnue"
+
+#: src/err-codes.h:203
+#, fuzzy
+msgid "Unknown command"
+msgstr "Code d'erreur inconnu"
+
+#: src/err-codes.h:204
+#, fuzzy
+msgid "Not operational"
+msgstr "Opération non supportée"
+
+#: src/err-codes.h:205
+#, fuzzy
+msgid "No passphrase given"
+msgstr "Mauvaise phrase de passe"
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr ""
+
+#: src/err-codes.h:207
+#, fuzzy
+msgid "Not enabled"
+msgstr "Non verrouillé"
+
+#: src/err-codes.h:208
+#, fuzzy
+msgid "No crypto engine"
+msgstr "Moteur crypto invalide"
+
+#: src/err-codes.h:209
+#, fuzzy
+msgid "Missing key"
+msgstr "Valeur manquante"
+
+#: src/err-codes.h:210
+#, fuzzy
+msgid "Too many objects"
+msgstr "Pas d'objet CMS"
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr ""
+
+#: src/err-codes.h:212
+#, fuzzy
+msgid "Not initialized"
+msgstr "Carte non initialisée"
+
+#: src/err-codes.h:213
+#, fuzzy
+msgid "Missing issuer certificate"
+msgstr "Certificat manquant"
+
+#: src/err-codes.h:214
+#, fuzzy
+msgid "Operation fully cancelled"
+msgstr "Opération annulée"
+
+#: src/err-codes.h:215
+#, fuzzy
+msgid "Operation not yet finished"
+msgstr "Opération annulée"
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr "Tampon trop court"
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr "Longueur spécifiée dans la S-expression invalide"
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr "Chaîne trop longue dans la S-expression"
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr "Parenthèses non balancées dans la S-expression"
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr "S-expression non canonique"
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr "Mauvais caractère dans la S-expression"
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr "Mauvaise balance de guillemets dans la S-expression"
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr "Préfixe nul dans la S-expression"
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr ""
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr ""
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr "Ponctuation réservée inattendue dans la S-expression"
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr "Mauvais caractère hexadécimal dans la S-expression"
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr "Nombre hexadécimal impair dans la S-expression"
+
+#: src/err-codes.h:229
+msgid "Bad octal character in S-expression"
+msgstr "Mauvais caractère octale dans la S-expression"
+
+#: src/err-codes.h:230
+#, fuzzy
+msgid "General IPC error"
+msgstr "Erreur génerale"
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr ""
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr ""
+
+#: src/err-codes.h:233
+#, fuzzy
+msgid "Invalid IPC response"
+msgstr "Réponse invalide"
+
+#: src/err-codes.h:234
+#, fuzzy
+msgid "Invalid value passed to IPC"
+msgstr "Valeur invalide"
+
+#: src/err-codes.h:235
+#, fuzzy
+msgid "Incomplete line passed to IPC"
+msgstr "Ligne incomplète"
+
+#: src/err-codes.h:236
+#, fuzzy
+msgid "Line passed to IPC too long"
+msgstr "Ligne trop longue"
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr ""
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr ""
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr ""
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr ""
+
+#: src/err-codes.h:243
+#, fuzzy
+msgid "IPC read error"
+msgstr "Erreur de carte"
+
+#: src/err-codes.h:244
+#, fuzzy
+msgid "IPC write error"
+msgstr "Erreur de carte"
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr ""
+
+#: src/err-codes.h:246
+#, fuzzy
+msgid "Unexpected IPC command"
+msgstr "Balise inattendue"
+
+#: src/err-codes.h:247
+#, fuzzy
+msgid "Unknown IPC command"
+msgstr "Code d'erreur inconnu"
+
+#: src/err-codes.h:248
+#, fuzzy
+msgid "IPC syntax error"
+msgstr "Erreur de syntaxe"
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr ""
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr ""
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr ""
+
+#: src/err-codes.h:252
+#, fuzzy
+msgid "IPC parameter error"
+msgstr "Erreur de carte"
+
+#: src/err-codes.h:253
+#, fuzzy
+msgid "Unknown IPC inquire"
+msgstr "Source inconnue"
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr "Code d'erreur 1 défini par l'utilisateur"
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr "Code d'erreur 2 défini par l'utilisateur"
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr "Code d'erreur 3 défini par l'utilisateur"
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr "Code d'erreur 4 défini par l'utilisateur"
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr "Code d'erreur 5 défini par l'utilisateur"
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr "Code d'erreur 6 défini par l'utilisateur"
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr "Code d'erreur 7 défini par l'utilisateur"
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr "Code d'erreur 8 défini par l'utilisateur"
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr "Code d'erreur 9 défini par l'utilisateur"
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr "Code d'erreur 10 défini par l'utilisateur"
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr "Code d'erreur 11 défini par l'utilisateur"
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr "Code d'erreur 12 défini par l'utilisateur"
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr "Code d'erreur 13 défini par l'utilisateur"
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr "Code d'erreur 14 défini par l'utilisateur"
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr "Code d'erreur 15 défini par l'utilisateur"
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr "Code d'erreur 16 défini par l'utilisateur"
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr ""
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr "Erreur système inconnue"
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr "Fin du fichier"
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr "Code d'erreur inconnu"
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr "Usage : %s GPG-ERROR [...]\n"
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr "%s : attention : pourrait ne pas reconnaître %s\n"
+
+#~ msgid "Assuan error"
+#~ msgstr "Erreur assuan"
diff --git a/libgpg-error-1.10/po/insert-header.sin b/libgpg-error-1.10/po/insert-header.sin
new file mode 100644
index 0000000..b26de01
--- /dev/null
+++ b/libgpg-error-1.10/po/insert-header.sin
@@ -0,0 +1,23 @@
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/libgpg-error-1.10/po/it.gmo b/libgpg-error-1.10/po/it.gmo
new file mode 100644
index 0000000..c9895f4
--- /dev/null
+++ b/libgpg-error-1.10/po/it.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/it.po b/libgpg-error-1.10/po/it.po
new file mode 100644
index 0000000..f8cd265
--- /dev/null
+++ b/libgpg-error-1.10/po/it.po
@@ -0,0 +1,1102 @@
+# Italian translation of libgpg-error.
+# Copyright (C) 2003 g10 Code GmbH
+# This file is distributed under the same license as the libgpg-error package.
+# Francesco Groccia <fgr＠anche｡no>, 2009.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.7\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2009-06-21 15:24+0200\n"
+"Last-Translator: Francesco Groccia <fgr＠anche｡no>\n"
+"Language-Team: Italian <tp@lists.linux.it>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "Sorgente non specificata"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GpgSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "GPG Agent"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr "Pinentry"
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr "Keybox"
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr "Dirmngr"
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr "GPA"
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr "Kleopatra"
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr ""
+
+#: src/err-sources.h:43
+msgid "Any source"
+msgstr "Qualsiasi fonte"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "Fonte 1 definita dall'utente"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "Fonte 2 definita dall'utente"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "Fonte 3 definita dall'utente"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "Fonte 4 definita dall'utente"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "Fonte sconosciuta"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "Eseguito"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "Errore generale"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "Pacchetto sconosciuto"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "Versione sconosciuta nel pacchetto"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "Algoritmo a chiave pubblica non valido"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "Algoritmo di digest non valido"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "Chiave pubblica errata"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "Chiave segreta errata"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "Firma digitale errata"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "Nessuna chiave pubblica"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "Errore nel codice di controllo"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "Passphrase errata"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "Algoritmo di cifratura non valido"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr "Apertura del portachiavi"
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "Pacchetto non valido"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr "Armatura non valida"
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "Nessun identificativo utente"
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "Nessuna chiave segreta"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "È stata usata una chiave segreta errata"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "Chiave di sessione errata"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "Algoritmo di compressione sconosciuto"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "Non è un numero primo"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "Metodo di codifica non valido"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "Schema di cifratura non valido"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "Schema di firma digitale non valido"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "Attributo non valido"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "Nessun valore"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "Non trovato"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "Valore non trovato"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "Errore di sintassi"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "Valore MPI errato"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "Passphrase non valida"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr "Classe di firma non valida"
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "Risorse esaurite"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "Portachiavi non valido"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "Errore nel database della fiducia"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "Certificato errato"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "Identificativo utente non valido"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "Errore inaspettato"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "Data e ora in conflitto"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "Errore del server delle chiavi"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "Algoritmo a chiave pubblica errato"
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr "Tributo a D. A."
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "Chiave di cifratura debole"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "Lunghezza chiave non valida"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "Argomento non valido"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "Errore di sintassi nell'URI"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "URI non valido"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "Errore di rete"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "Host sconosciuto"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "Autodiagnosi non riuscito"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "Dati non cifrati"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "Dati non elaborati"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "Chiave pubblica non utilizzabile"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "Chiave segreta non utilizzabile"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "Valore non valido"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "Catena del certificato errata"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "Certificato mancante"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "Dati assenti"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "Bug"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "Non supportato"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "Codice di operazione non valido"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "Tempo scaduto"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "Errore interno"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "EOF (gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "Oggetto non valido"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "L'oggetto fornito è troppo piccolo"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "L'oggetto fornito è troppo grande"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "Voce mancante nell'oggetto"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "Non implementato"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr "Uso in conflitto"
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "Modo di cifratura non valido"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr "Indicatore non valido"
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr "Handle non valido"
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "Risultato troncato"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "Riga incompleta"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "Risposta non valida"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "Nessun agente in esecuzione"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "errore dell'agente"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "Dati non validi"
+
+#: src/err-codes.h:108
+msgid "Unspecific Assuan server fault"
+msgstr "Fallimento non specificato del server Assuan"
+
+#: src/err-codes.h:109
+msgid "General Assuan error"
+msgstr "Errore generale per Assuan"
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr "Chiave di sessione non valida"
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr "S-expression non valida"
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr "Algoritmo non supportato"
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr "pinentry non è installato"
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr "Errore di pinentry"
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr "PIN errato"
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr "Nome non valido"
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr "Dati errati"
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr "Parametro non valido"
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr "Scheda errata"
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr "dirmngr non è installato"
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr "Errore di dirmngr"
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr "Certificato revocato"
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr "Nessun CRL conosciuto"
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr "CRL troppo vecchio"
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr "Riga troppo lunga"
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr "Non affidabile"
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr "Operazione annullata"
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr "Certificato CA errato"
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr "Certificato scaduto"
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr "Certificato troppo nuovo"
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr "Certificato non supportato"
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr "S-expression sconosciuta"
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr "Protezione non supportata"
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr "Protezione danneggiata"
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr "Nome ambiguo"
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr "Errore della scheda"
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr "È richiesto il riavvio della scheda"
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr "Scheda rimossa"
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr "Scheda non valida"
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr "Scheda non presente"
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr "Non esiste un'applicazione per PKCS15"
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr "Non confermato"
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr "Errore di configurazione"
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr "Nessuna politica corrispondente"
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr "Indice non valido"
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr "Identificativo non valido"
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr "Nessun demone per la SmartCard"
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr "Errore del demone della SmartCard"
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr "Protocollo non supportato"
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr "Sistema personale di identificazione non valido"
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr "La scheda non è stata inizializzata"
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr "Operazione non supportata"
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr "Uso errato della chiave"
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr "Non è stato trovato nulla"
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr "Tipo blob errato"
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr "Valore assente"
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr "Problema hardware"
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr "PIN bloccato"
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr "Le condizioni d'uso non sono state soddisfatte"
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr "I PIN non sono stati sincronizzati"
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr "CRL non valido"
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr "Errore BER"
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr "BER non valido"
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr "Elemento non trovato"
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr "Identificatore non trovato"
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr "Etichetta non valida"
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr "Lunghezza non valida"
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr "Informazioni della chiave non valide"
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr "Etichetta inaspettata"
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr "Non è un codificato DER"
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr "Non esiste alcun oggetto CMS"
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr "Oggetto CMS non valido"
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr "Oggetto CMS sconosciuto"
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr "Oggetto CMS non supportato"
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr "Codifica non supportata"
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr "Versione CMS non supportata"
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr "Algoritmo sconosciuto"
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr "Motore crittografico non valido"
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr "Chiave pubblica non affidabile"
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr "Decifratura non riuscita"
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr "Chiave scaduta"
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr "Firma scaduta"
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr "Problema nella codifica"
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr "Stato non valido"
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr "Valore duplicato"
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr "Azione mancante"
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr "Modulo ASN.1 non trovato"
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr "Testo per l'OID non valido"
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr "Data non valida"
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr "Oggetto CRL non valido"
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr "Versione CRL non supportata"
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr "Certificato dell'oggetto non valido"
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr "Nome sconosciuto"
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr "Funzione locale ha fallito"
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr "Non bloccato"
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr "Violazione del protocollo"
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr "MAC non valido"
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr "Richiesta non valida"
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr "Estensione sconosciuta"
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr "Estensione critica sconosciuta"
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr "Bloccato"
+
+#: src/err-codes.h:202
+msgid "Unknown option"
+msgstr "Opzione sconosciuta"
+
+#: src/err-codes.h:203
+msgid "Unknown command"
+msgstr "Comando sconosciuto"
+
+#: src/err-codes.h:204
+msgid "Not operational"
+msgstr "Non è in funzione"
+
+#: src/err-codes.h:205
+msgid "No passphrase given"
+msgstr "Nessuna passphrase fornita"
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr "Nessun PIN fornito"
+
+#: src/err-codes.h:207
+#, fuzzy
+msgid "Not enabled"
+msgstr "Non bloccato"
+
+#: src/err-codes.h:208
+#, fuzzy
+msgid "No crypto engine"
+msgstr "Motore crittografico non valido"
+
+#: src/err-codes.h:209
+#, fuzzy
+msgid "Missing key"
+msgstr "Valore assente"
+
+#: src/err-codes.h:210
+#, fuzzy
+msgid "Too many objects"
+msgstr "Non esiste alcun oggetto CMS"
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr ""
+
+#: src/err-codes.h:212
+#, fuzzy
+msgid "Not initialized"
+msgstr "La scheda non è stata inizializzata"
+
+#: src/err-codes.h:213
+#, fuzzy
+msgid "Missing issuer certificate"
+msgstr "Certificato mancante"
+
+#: src/err-codes.h:214
+#, fuzzy
+msgid "Operation fully cancelled"
+msgstr "Operazione annullata"
+
+#: src/err-codes.h:215
+msgid "Operation not yet finished"
+msgstr "Operazione non ancora terminata"
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr "Buffer troppo breve"
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr "Lunghezza dello specificatore in S-expression non valida"
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr "Testo troppo lungo in S-expression"
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr "Parentesi non corrispondenti in S-expression"
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr "S-expression non canonica"
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr "Carattere errato in S-expression"
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr "Citazione errata in S-expression"
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr "Prefisso zero in S-expression"
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr "Suggerimenti mostrati nidificati in S-expression"
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr "Suggerimenti mostrati non corrispondenti"
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr "Punteggiatura riservata inaspettata in S-expression"
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr "Carattere esadecimale errato in S-expression"
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr "Numeri esadecimali dispari in S-expression"
+
+#: src/err-codes.h:229
+#, fuzzy
+msgid "Bad octal character in S-expression"
+msgstr "Carattere ottale errato in S-expression"
+
+#: src/err-codes.h:230
+msgid "General IPC error"
+msgstr "Errore IPC generale"
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr "Chiamata \"accept\" IPC non riuscita"
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr "Chiamata \"connect\" IPC non riuscita"
+
+#: src/err-codes.h:233
+msgid "Invalid IPC response"
+msgstr "Risposta IPC non valida"
+
+#: src/err-codes.h:234
+msgid "Invalid value passed to IPC"
+msgstr "Valore non valido passato a IPC"
+
+#: src/err-codes.h:235
+msgid "Incomplete line passed to IPC"
+msgstr "Riga incompleta passata a IPC"
+
+#: src/err-codes.h:236
+msgid "Line passed to IPC too long"
+msgstr "Riga passata a IPC troppo lunga"
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr "Comandi IPC nidificati"
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr "Nessun callback \"data\" in IPC"
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr "Nessun callback \"inquire\" in IPC"
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr "Non è un server IPC"
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr "Non è un client IPC"
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr "Problema nell'avviare il server IPC"
+
+#: src/err-codes.h:243
+msgid "IPC read error"
+msgstr "errore di lettura IPC"
+
+#: src/err-codes.h:244
+msgid "IPC write error"
+msgstr "errore di scrittura IPC"
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr "Troppi dati per il livello IPC"
+
+#: src/err-codes.h:246
+msgid "Unexpected IPC command"
+msgstr "Comando IPC inaspettato"
+
+#: src/err-codes.h:247
+msgid "Unknown IPC command"
+msgstr "Comando IPC sconosciuto"
+
+#: src/err-codes.h:248
+msgid "IPC syntax error"
+msgstr "errore di sintassi IPC"
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr "La chiamata IPC è stata annullata"
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr "Nessuna sorgente in entrata per IPC"
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr "Nessuna sorgente in uscita per IPC"
+
+#: src/err-codes.h:252
+msgid "IPC parameter error"
+msgstr "Errore per il parametro IPC"
+
+#: src/err-codes.h:253
+msgid "Unknown IPC inquire"
+msgstr "Richiesta IPC sconosciuta"
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr "Codice errore 1 definito dall'utente"
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr "Codice errore 2 definito dall'utente"
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr "Codice errore 3 definito dall'utente"
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr "Codice errore 4 definito dall'utente"
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr "Codice errore 5 definito dall'utente"
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr "Codice errore 6 definito dall'utente"
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr "Codice errore 7 definito dall'utente"
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr "Codice errore 8 definito dall'utente"
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr "Codice errore 9 definito dall'utente"
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr "Codice errore 10 definito dall'utente"
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr "Codice errore 11 definito dall'utente"
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr "Codice errore 12 definito dall'utente"
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr "Codice errore 13 definito dall'utente"
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr "Codice errore 14 definito dall'utente"
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr "Codice errore 15 definito dall'utente"
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr "Codice errore 16 definito dall'utente"
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr "Errore di sistema senza errno"
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr "Errore di sistema sconosciuto"
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr "Fine del file"
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr "Codice di errore sconosciuto"
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr "Uso: %s GPG-ERROR [...]\n"
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr "%s: avviso: impossibile riconoscere %s\n"
diff --git a/libgpg-error-1.10/po/libgpg-error.pot b/libgpg-error-1.10/po/libgpg-error.pot
new file mode 100644
index 0000000..1ea8e78
--- /dev/null
+++ b/libgpg-error-1.10/po/libgpg-error.pot
@@ -0,0 +1,1095 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR g10 Code GmbH
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.10\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=CHARSET\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr ""
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr ""
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr ""
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr ""
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr ""
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr ""
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr ""
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr ""
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr ""
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr ""
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr ""
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr ""
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr ""
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr ""
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr ""
+
+#: src/err-sources.h:43
+msgid "Any source"
+msgstr ""
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr ""
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr ""
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr ""
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr ""
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr ""
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr ""
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr ""
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr ""
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr ""
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr ""
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr ""
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr ""
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr ""
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr ""
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr ""
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr ""
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr ""
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr ""
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr ""
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr ""
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr ""
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr ""
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr ""
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr ""
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr ""
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr ""
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr ""
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr ""
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr ""
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr ""
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr ""
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr ""
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr ""
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr ""
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr ""
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr ""
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr ""
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr ""
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr ""
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr ""
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr ""
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr ""
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr ""
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr ""
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr ""
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr ""
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr ""
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr ""
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr ""
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr ""
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr ""
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr ""
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr ""
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr ""
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr ""
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr ""
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr ""
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr ""
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr ""
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr ""
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr ""
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr ""
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr ""
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr ""
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr ""
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr ""
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr ""
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr ""
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr ""
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr ""
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr ""
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr ""
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr ""
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr ""
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr ""
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr ""
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr ""
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr ""
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr ""
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr ""
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr ""
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr ""
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr ""
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr ""
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr ""
+
+#: src/err-codes.h:108
+msgid "Unspecific Assuan server fault"
+msgstr ""
+
+#: src/err-codes.h:109
+msgid "General Assuan error"
+msgstr ""
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr ""
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr ""
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr ""
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr ""
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr ""
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr ""
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr ""
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr ""
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr ""
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr ""
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr ""
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr ""
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr ""
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr ""
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr ""
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr ""
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr ""
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr ""
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr ""
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr ""
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr ""
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr ""
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr ""
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr ""
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr ""
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr ""
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr ""
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr ""
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr ""
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr ""
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr ""
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr ""
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr ""
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr ""
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr ""
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr ""
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr ""
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr ""
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr ""
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr ""
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr ""
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr ""
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr ""
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr ""
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr ""
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr ""
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr ""
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr ""
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr ""
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr ""
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr ""
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr ""
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr ""
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr ""
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr ""
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr ""
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr ""
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr ""
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr ""
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr ""
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr ""
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr ""
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr ""
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr ""
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr ""
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr ""
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr ""
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr ""
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr ""
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr ""
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr ""
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr ""
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr ""
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr ""
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr ""
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr ""
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr ""
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr ""
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr ""
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr ""
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr ""
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr ""
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr ""
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr ""
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr ""
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr ""
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr ""
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr ""
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr ""
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr ""
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr ""
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr ""
+
+#: src/err-codes.h:202
+msgid "Unknown option"
+msgstr ""
+
+#: src/err-codes.h:203
+msgid "Unknown command"
+msgstr ""
+
+#: src/err-codes.h:204
+msgid "Not operational"
+msgstr ""
+
+#: src/err-codes.h:205
+msgid "No passphrase given"
+msgstr ""
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr ""
+
+#: src/err-codes.h:207
+msgid "Not enabled"
+msgstr ""
+
+#: src/err-codes.h:208
+msgid "No crypto engine"
+msgstr ""
+
+#: src/err-codes.h:209
+msgid "Missing key"
+msgstr ""
+
+#: src/err-codes.h:210
+msgid "Too many objects"
+msgstr ""
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr ""
+
+#: src/err-codes.h:212
+msgid "Not initialized"
+msgstr ""
+
+#: src/err-codes.h:213
+msgid "Missing issuer certificate"
+msgstr ""
+
+#: src/err-codes.h:214
+msgid "Operation fully cancelled"
+msgstr ""
+
+#: src/err-codes.h:215
+msgid "Operation not yet finished"
+msgstr ""
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr ""
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr ""
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr ""
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr ""
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr ""
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr ""
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr ""
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr ""
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr ""
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr ""
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr ""
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr ""
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr ""
+
+#: src/err-codes.h:229
+msgid "Bad octal character in S-expression"
+msgstr ""
+
+#: src/err-codes.h:230
+msgid "General IPC error"
+msgstr ""
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr ""
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr ""
+
+#: src/err-codes.h:233
+msgid "Invalid IPC response"
+msgstr ""
+
+#: src/err-codes.h:234
+msgid "Invalid value passed to IPC"
+msgstr ""
+
+#: src/err-codes.h:235
+msgid "Incomplete line passed to IPC"
+msgstr ""
+
+#: src/err-codes.h:236
+msgid "Line passed to IPC too long"
+msgstr ""
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr ""
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr ""
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr ""
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr ""
+
+#: src/err-codes.h:243
+msgid "IPC read error"
+msgstr ""
+
+#: src/err-codes.h:244
+msgid "IPC write error"
+msgstr ""
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr ""
+
+#: src/err-codes.h:246
+msgid "Unexpected IPC command"
+msgstr ""
+
+#: src/err-codes.h:247
+msgid "Unknown IPC command"
+msgstr ""
+
+#: src/err-codes.h:248
+msgid "IPC syntax error"
+msgstr ""
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr ""
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr ""
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr ""
+
+#: src/err-codes.h:252
+msgid "IPC parameter error"
+msgstr ""
+
+#: src/err-codes.h:253
+msgid "Unknown IPC inquire"
+msgstr ""
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr ""
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr ""
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr ""
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr ""
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr ""
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr ""
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr ""
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr ""
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr ""
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr ""
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr ""
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr ""
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr ""
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr ""
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr ""
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr ""
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr ""
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr ""
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr ""
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr ""
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr ""
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr ""
diff --git a/libgpg-error-1.10/po/nl.gmo b/libgpg-error-1.10/po/nl.gmo
new file mode 100644
index 0000000..a276ef5
--- /dev/null
+++ b/libgpg-error-1.10/po/nl.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/nl.po b/libgpg-error-1.10/po/nl.po
new file mode 100644
index 0000000..b36d8fc
--- /dev/null
+++ b/libgpg-error-1.10/po/nl.po
@@ -0,0 +1,1100 @@
+# translation of libgpg-error-1.7.nl.po to Dutch
+# Copyright (C) 2008 Free Software Foundation, Inc.
+# This file is distributed under the same license as the libgpg-error package.
+#
+# Freek de Kruijf <f.de.kruijf@gmail.com>, 2009, 2010.
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.7\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2010-04-30 16:20+0200\n"
+"Last-Translator: Freek de Kruijf <f.de.kruijf@gmail.com>\n"
+"Language-Team: Dutch <vertaling@vrijschrift.org>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Lokalize 1.0\n"
+"Plural-Forms: nplurals=2; plural=n != 1;\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "Niet-gespecificeerde bron"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GnuPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GpgSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "GPG-agent"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr "Pinentry"
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr "Keybox"
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr "Dirmngr"
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr "GPA"
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr "Kleopatra"
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr ""
+
+#: src/err-sources.h:43
+msgid "Any source"
+msgstr "Elke bron"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "Gebruikergedefinieerde bron 1"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "Gebruikergedefinieerde bron 2"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "Gebruikergedefinieerde bron 3"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "Gebruikergedefinieerde bron 4"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "Onbekende bron"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "Succes"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "Algemene fout"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "Onbekend pakket"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "Onbekende versie in pakket"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "Ongeldig algoritme voor publieke sleutel"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "Ongeldig digest-algoritme"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "Foute publieke sleutel"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "Foute geheime sleutel"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "Onjuiste ondertekening"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "Geen publieke sleutel"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "Fout in controlesom"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "Ongeldige wachtwoordzin"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "Ongeldig versleutelingsalgoritme"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr "Sleutelring open"
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "Ongeldig pakket"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr "Ongeldige bepantsering"
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "Geen gebruiker-ID"
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "Geen geheime sleutel"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "Foute geheime sleutel gebruikt"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "Foute sessiesleutel"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "Onbekend compressie-algoritme"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "Nummer is geen priemgetal"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "Ongeldige coderingsmethode"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "Ongeldig versleutelingsschema"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "Ongeldig ondertekeningsschema"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "Ongeldig attribuut"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "Geen waarde"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "Niet gevonden"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "Waarde niet gevonden"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "Syntaxfout"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "Foute MPI-waarde"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "Ongeldige wachtwoordzin"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr "Ongeldige ondertekeningsklasse"
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "Hulpbronnen uitgeput"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "Ongeldige sleutelring"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "Fout in vertrouwensDB"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "Fout certificaat"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "Ongeldig gebruiker-ID"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "Onverwachte fout"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "Tijdconflict"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "Fout in sleutelserver"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "Ongeldig algoritme voor publieke sleutel"
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr "Eerbetoon aan D. A."
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "Zwakke cryptografische sleutel"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "Ongeldige sleutellengte"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "Ongeldig argument"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "Syntaxfout in URI"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "Ongeldige URI"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "Netwerkfout"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "Onbekende host"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "Zelftest is mislukt"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "Gegevens niet versleuteld"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "Gegevens niet verwerkt"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "Onbruikbare publieke sleutel"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "Onbruikbare geheime sleutel"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "Ongeldige waarde"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "Foute certificaatketting"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "Ontbrekend certificaat"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "Geen gegevens"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "Bug"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "Niet ondersteund"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "Ongeldige bewerkingscode"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "Tijdslimiet"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "Interne fout"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "EOF (gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "Ongeldig object"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "Geleverd object is te kort"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "Geleverd object is te groot"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "Ontbrekend item in object"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "Niet geïmplementeerd"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr "Conflicterend gebruik"
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "Ongeldige versleutelingsmodus"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr "Ongeldige vlag"
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr "Ongeldige handel"
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "Resultaat is afgekapt"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "Onvolledige regel"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "Ongeldige reactie"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "Er draait geen agent"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "fout met agent"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "Ongeldige gegevens"
+
+#: src/err-codes.h:108
+msgid "Unspecific Assuan server fault"
+msgstr ""
+
+#: src/err-codes.h:109
+msgid "General Assuan error"
+msgstr ""
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr ""
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr ""
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr ""
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr ""
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr ""
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr ""
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr ""
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr ""
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr ""
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr ""
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr ""
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr ""
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr ""
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr ""
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr ""
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr ""
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr ""
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr ""
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr ""
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr ""
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr ""
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr ""
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr ""
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr ""
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr ""
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr ""
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr ""
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr ""
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr ""
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr ""
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr ""
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr ""
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr ""
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr ""
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr ""
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr ""
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr ""
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr ""
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr ""
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr ""
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr ""
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr ""
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr ""
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr ""
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr ""
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr ""
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr ""
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr ""
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr ""
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr ""
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr ""
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr ""
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr ""
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr ""
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr ""
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr ""
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr ""
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr ""
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr ""
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr ""
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr ""
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr ""
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr ""
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr ""
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr ""
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr ""
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr ""
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr ""
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr ""
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr ""
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr ""
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr ""
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr ""
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr ""
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr ""
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr ""
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr ""
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr ""
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr ""
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr ""
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr ""
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr ""
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr ""
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr ""
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr ""
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr ""
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr ""
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr ""
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr ""
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr ""
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr ""
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr ""
+
+#: src/err-codes.h:202
+msgid "Unknown option"
+msgstr ""
+
+#: src/err-codes.h:203
+msgid "Unknown command"
+msgstr ""
+
+#: src/err-codes.h:204
+msgid "Not operational"
+msgstr ""
+
+#: src/err-codes.h:205
+msgid "No passphrase given"
+msgstr ""
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr ""
+
+#: src/err-codes.h:207
+#, fuzzy
+msgid "Not enabled"
+msgstr "Geen waarde"
+
+#: src/err-codes.h:208
+msgid "No crypto engine"
+msgstr ""
+
+#: src/err-codes.h:209
+#, fuzzy
+msgid "Missing key"
+msgstr "Foute sessiesleutel"
+
+#: src/err-codes.h:210
+msgid "Too many objects"
+msgstr ""
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr ""
+
+#: src/err-codes.h:212
+#, fuzzy
+msgid "Not initialized"
+msgstr "Geen waarde"
+
+#: src/err-codes.h:213
+#, fuzzy
+msgid "Missing issuer certificate"
+msgstr "Ontbrekend certificaat"
+
+#: src/err-codes.h:214
+msgid "Operation fully cancelled"
+msgstr ""
+
+#: src/err-codes.h:215
+msgid "Operation not yet finished"
+msgstr ""
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr ""
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr ""
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr ""
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr ""
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr ""
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr ""
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr ""
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr ""
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr ""
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr ""
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr ""
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr ""
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr ""
+
+#: src/err-codes.h:229
+msgid "Bad octal character in S-expression"
+msgstr ""
+
+#: src/err-codes.h:230
+msgid "General IPC error"
+msgstr ""
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr ""
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr ""
+
+#: src/err-codes.h:233
+msgid "Invalid IPC response"
+msgstr ""
+
+#: src/err-codes.h:234
+msgid "Invalid value passed to IPC"
+msgstr ""
+
+#: src/err-codes.h:235
+msgid "Incomplete line passed to IPC"
+msgstr ""
+
+#: src/err-codes.h:236
+msgid "Line passed to IPC too long"
+msgstr ""
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr ""
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr ""
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr ""
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr ""
+
+#: src/err-codes.h:243
+msgid "IPC read error"
+msgstr ""
+
+#: src/err-codes.h:244
+msgid "IPC write error"
+msgstr ""
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr ""
+
+#: src/err-codes.h:246
+msgid "Unexpected IPC command"
+msgstr ""
+
+#: src/err-codes.h:247
+msgid "Unknown IPC command"
+msgstr ""
+
+#: src/err-codes.h:248
+msgid "IPC syntax error"
+msgstr ""
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr ""
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr ""
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr ""
+
+#: src/err-codes.h:252
+msgid "IPC parameter error"
+msgstr ""
+
+#: src/err-codes.h:253
+msgid "Unknown IPC inquire"
+msgstr ""
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr ""
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr ""
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr ""
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr ""
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr ""
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr ""
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr ""
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr ""
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr ""
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr ""
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr ""
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr ""
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr ""
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr ""
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr ""
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr ""
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr ""
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr ""
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr ""
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr ""
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr ""
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr ""
diff --git a/libgpg-error-1.10/po/pl.gmo b/libgpg-error-1.10/po/pl.gmo
new file mode 100644
index 0000000..d2b2f2a
--- /dev/null
+++ b/libgpg-error-1.10/po/pl.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/pl.po b/libgpg-error-1.10/po/pl.po
new file mode 100644
index 0000000..0a95d78
--- /dev/null
+++ b/libgpg-error-1.10/po/pl.po
@@ -0,0 +1,1097 @@
+# Polish translation for libgpg-error.
+# Copyright (C) 2004, 2005, 2006 Free Software Foundation, Inc.
+# This file is distributed under the same license as the libgpg-error package.
+# Jakub Bogusz <qboosh@pld-linux.org>, 2004-2010.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.9\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2010-08-05 20:05+0200\n"
+"Last-Translator: Jakub Bogusz <qboosh@pld-linux.org>\n"
+"Language-Team: Polish <translation-team-pl@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-2\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "Nie podane ¼ród³o"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GnuPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GpgSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "Agent GPG"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr "Pinentry"
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr "Keybox"
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr "Dirmngr"
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr "GPA"
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr "Kleopatra"
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr "G13"
+
+#: src/err-sources.h:43
+msgid "Any source"
+msgstr "Dowolne ¼ród³o"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "Zdefiniowane przez u¿ytkownika ¼ród³o 1"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "Zdefiniowane przez u¿ytkownika ¼ród³o 2"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "Zdefiniowane przez u¿ytkownika ¼ród³o 3"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "Zdefiniowane przez u¿ytkownika ¼ród³o 4"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "Nieznane ¼ród³o"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "Sukces"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "B³±d ogólny"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "Nieznany pakiet"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "Nieznana wersja w pakiecie"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "Niepoprawny algorytm klucza publicznego"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "Niepoprawny algorytm skrótu"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "B³êdny klucz publiczny"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "B³êdny klucz tajny"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "B³êdna sygnatura"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "Brak klucza publicznego"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "B³±d sumy kontrolnej"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "B³êdne has³o"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "Niepoprawny algorytm szyfru"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr "Zbiór kluczy otwarty"
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "Niepoprawny pakiet"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr "Niepoprawne opakowanie"
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "Brak identyfikatora u¿ytkownika"
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "Brak klucza tajnego"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "U¿yto niew³a¶ciwego klucza tajnego"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "B³êdny klucz sesji"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "Nieznany algorytm kompresji"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "Liczba nie jest pierwsza"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "Niepoprawna metoda kodowania"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "Niepoprawny uk³ad szyfrowania"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "Niepoprawny uk³ad sygnatury"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "Niepoprawny atrybut"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "Brak warto¶ci"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "Nie znaleziono"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "Warto¶æ nie znaleziona"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "B³±d sk³adni"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "B³êdna warto¶æ MPI"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "Niepoprawne has³o"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr "Niepoprawna klasa sygnatury"
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "Zasoby wyczerpane"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "Niepoprawny zbiór kluczy"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "B³±d bazy zaufania"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "B³êdny certyfikat"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "Niepoprawny identyfikator u¿ytkownika"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "Nieoczekiwany b³±d"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "Konflikt czasu"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "B³±d serwera kluczy"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "Niew³a¶ciwy algorytm klucza publicznego"
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr "Pamiêci D. A."
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "S³aby klucz szyfrowania"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "Niepoprawna d³ugo¶æ klucza"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "Niepoprawny argument"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "B³±d sk³adni w URI"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "B³êdne URI"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "B³±d sieci"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "Nieznany host"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "Test wewnêtrzny nie powiód³ siê"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "Dane nie zaszyfrowane"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "Dane nie przetworzone"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "Bezu¿yteczny klucz publiczny"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "Bezu¿yteczny klucz tajny"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "Niepoprawna warto¶æ"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "B³êdny ³añcuch certyfikatów"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "Brakuj±cy certyfikat"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "Brak danych"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "B³±d w kodzie"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "Nie obs³ugiwane"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "Niepoprawny kod operacji"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "Up³yn±³ limit czasu"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "B³±d wewnêtrzny"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "Koniec pliku (gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "Niepoprawny obiekt"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "Dostarczony obiekt jest zbyt ma³y"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "Dostarczony obiekt jest zbyt du¿y"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "Brak elementu w obiekcie"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "Nie zaimplementowane"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr "Konflikt u¿ycia"
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "Niepoprawny tryb szyfru"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr "Niepoprawna flaga"
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr "Niepoprawny uchwyt"
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "Wynik skrócony"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "Niekompletna linia"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "Niepoprawna odpowied¼"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "Agent nie uruchomiony"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "b³±d agenta"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "Niepoprawne dane"
+
+#: src/err-codes.h:108
+msgid "Unspecific Assuan server fault"
+msgstr "Nieokre¶lone niepowodzenie serwera Assuan"
+
+#: src/err-codes.h:109
+msgid "General Assuan error"
+msgstr "B³±d ogólny Assuana"
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr "Niepoprawny klucz sesji"
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr "Niepoprawne S-wyra¿enie"
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr "Nieobs³ugiwany algorytn"
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr "Brak pinentry"
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr "B³±d pinentry"
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr "B³êdny PIN"
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr "Niepoprawna nazwa"
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr "B³êdne dane"
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr "Niepoprawny parametr"
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr "Niew³a¶ciwa karta"
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr "Brak dirmngr"
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr "B³±d dirmngr"
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr "Certyfikat anulowany"
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr "Nieznane CRL"
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr "CRL zbyt stare"
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr "Linia zbyt d³uga"
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr "Nie zaufany"
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr "Operacja anulowana"
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr "B³êdny certyfikat CA"
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr "Certyfikat wygas³"
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr "Certyfikat zbyt m³ody"
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr "Nieobs³ugiwany certyfikat"
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr "Nieznane S-wyra¿enie"
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr "Nieobs³ugiwane zabezpieczenie"
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr "Uszkodzone zabezpieczenie"
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr "Niejednoznaczna nazwa"
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr "B³±d karty"
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr "Wymagany reset karty"
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr "Karta wyci±gniêta"
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr "Niepoprawna karta"
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr "Karta nieobecna"
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr "Brak aplikacji PKCS15"
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr "Brak potwierdzenia"
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr "B³±d konfiguracji"
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr "Brak zgodno¶ci polityki"
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr "Niepoprawny indeks"
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr "Niepoprawny identyfikator"
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr "Brak demona SmartCard"
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr "B³±d demona SmartCard"
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr "Nieobs³ugiwany protokó³"
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr "B³êdna metoda PIN-u"
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr "Karta nie zainicjowana"
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr "Nieobs³ugiwana operacja"
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr "Niew³a¶ciwe u¿ycie klucza"
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr "Nic nie znaleziono"
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr "Niew³a¶ciwy typ blob"
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr "Brak warto¶ci"
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr "Problem sprzêtowy"
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr "PIN zablokowany"
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr "Warunki u¿ycia nie spe³nione"
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr "PIN-y nie zsynchronizowane"
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr "Niepoprawne CRL"
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr "B³±d BER"
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr "Niepoprawne BER"
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr "Element nie znaleziony"
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr "Identyfikator nie znaleziony"
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr "Niepoprawny znacznik"
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr "Niepoprawna d³ugo¶æ"
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr "Niepoprawna informacja klucza"
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr "Nieoczekiwany znacznik"
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr "Nie zakodowane DER"
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr "Brak obiektu CMS"
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr "Niepoprawny obiekt CMS"
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr "Nieznany obiekt CMS"
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr "Nieobs³ugiwany obiekt CMS"
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr "Nieobs³ugiwane kodowanie"
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr "Nieobs³ugiwana wersja CMS"
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr "Nieznany algorytm"
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr "Niepoprawny silnik kryptograficzny"
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr "Klucz publiczny nie zaufany"
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr "Odszyfrowywanie nie powiod³o siê"
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr "Klucz wygas³"
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr "Sygnatura wygas³a"
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr "Problem z kodowaniem"
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr "Niepoprawny stan"
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr "Powtórzona warto¶æ"
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr "Brak akcji"
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr "Nie znaleziono modu³u ASN.1"
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr "Niepoprawny ³añcuch OID"
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr "Niepoprawny czas"
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr "Niepoprawny obiekt CRL"
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr "Nieobs³ugiwana wersja CRL"
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr "Niepoprawny obiekt certyfikatu"
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr "Nieznana nazwa"
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr "Funkcja lokalizacji nie powiod³a siê"
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr "Nie zablokowany"
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr "Naruszenie protoko³u"
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr "Niepoprawny MAC"
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr "Niepoprawne ¿±danie"
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr "Nieznane rozszerzenie"
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr "Nieznane rozszerzenie krytyczne"
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr "Zablokowany"
+
+#: src/err-codes.h:202
+msgid "Unknown option"
+msgstr "Nieznana opcja"
+
+#: src/err-codes.h:203
+msgid "Unknown command"
+msgstr "Nieznane polecenie"
+
+#: src/err-codes.h:204
+msgid "Not operational"
+msgstr "Nie gotowy"
+
+#: src/err-codes.h:205
+msgid "No passphrase given"
+msgstr "Nie podano has³a"
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr "Nie podano PIN-u"
+
+#: src/err-codes.h:207
+msgid "Not enabled"
+msgstr "Nie w³±czony"
+
+#: src/err-codes.h:208
+msgid "No crypto engine"
+msgstr "Brak silnika kryptograficznego"
+
+#: src/err-codes.h:209
+msgid "Missing key"
+msgstr "Brak klucza"
+
+#: src/err-codes.h:210
+msgid "Too many objects"
+msgstr "Zbyt du¿o obiektów"
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr "Osi±gniêto limit"
+
+#: src/err-codes.h:212
+#, fuzzy
+msgid "Not initialized"
+msgstr "Karta nie zainicjowana"
+
+#: src/err-codes.h:213
+#, fuzzy
+msgid "Missing issuer certificate"
+msgstr "Brakuj±cy certyfikat"
+
+#: src/err-codes.h:214
+#, fuzzy
+msgid "Operation fully cancelled"
+msgstr "Operacja anulowana"
+
+#: src/err-codes.h:215
+msgid "Operation not yet finished"
+msgstr "Operacja jeszcze nie zakoñczona"
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr "Bufor zbyt ma³y"
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr "Niepoprawne okre¶lenie d³ugo¶ci w S-wyra¿eniu"
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr "Zbyt d³ugi ³añcuch w S-wyra¿eniu"
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr "Niedopasowane nawiasy w S-wyra¿eniu"
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr "S-wyra¿enie nie kanoniczne"
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr "B³êdny znak w S-wyra¿eniu"
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr "B³êdne cytowanie w S-wyra¿eniu"
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr "Zerowy prefiks w S-wyra¿eniu"
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr "Zagnie¿d¿one podpowiedzi wy¶wietlania w S-wyra¿eniu"
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr "Niedopasowane podpowiedzi wy¶wietlania"
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr "Nieoczekiwany zarezerwowany znak w S-wyra¿eniu"
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr "B³êdny znak szesnastkowy w S-wyra¿eniu"
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr "Nieparzysta liczba cyfr szesnastkowych w S-wyra¿eniu"
+
+#: src/err-codes.h:229
+msgid "Bad octal character in S-expression"
+msgstr "B³êdny znak ósemkowy w S-wyra¿eniu"
+
+#: src/err-codes.h:230
+msgid "General IPC error"
+msgstr "B³±d ogólny IPC"
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr "Wywo³anie accept dla IPC nie powiod³o siê"
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr "Wywo³anie connect dla IPC nie powiod³o siê"
+
+#: src/err-codes.h:233
+msgid "Invalid IPC response"
+msgstr "Niepoprawna odpowied¼ IPC"
+
+#: src/err-codes.h:234
+msgid "Invalid value passed to IPC"
+msgstr "Niepoprawna warto¶æ przekazana do IPC"
+
+#: src/err-codes.h:235
+msgid "Incomplete line passed to IPC"
+msgstr "Niekompletna linia przekazana do IPC"
+
+#: src/err-codes.h:236
+msgid "Line passed to IPC too long"
+msgstr "Linia przekazana do IPC zbyt d³uga"
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr "Zagnie¿d¿one polecenia IPC"
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr "Brak wywo³ania zwrotnego dla danych w IPC"
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr "Brak wywo³ania wstecznego dla zapytañ w IPC"
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr "To nie jest serwer IPC"
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr "To nie jest klient IPC"
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr "Problem z uruchomieniem serwera IPC"
+
+#: src/err-codes.h:243
+msgid "IPC read error"
+msgstr "B³±d odczytu IPC"
+
+#: src/err-codes.h:244
+msgid "IPC write error"
+msgstr "B³±d zapisu IPC"
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr "Zbyt du¿o danych dla warstwy IPC"
+
+#: src/err-codes.h:246
+msgid "Unexpected IPC command"
+msgstr "Nieoczekiwane polecenie IPC"
+
+#: src/err-codes.h:247
+msgid "Unknown IPC command"
+msgstr "Nieznane polecenie IPC"
+
+#: src/err-codes.h:248
+msgid "IPC syntax error"
+msgstr "B³±d sk³adni IPC"
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr "Wywo³anie IPC zosta³o anulowane"
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr "Brak ¼ród³a wej¶ciowego dla IPC"
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr "Brak ¼ród³a wyj¶ciowego dla IPC"
+
+#: src/err-codes.h:252
+msgid "IPC parameter error"
+msgstr "B³±d parametru IPC"
+
+#: src/err-codes.h:253
+msgid "Unknown IPC inquire"
+msgstr "Nieznane zapytanie IPC"
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 1"
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 2"
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 3"
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 4"
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 5"
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 6"
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 7"
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 8"
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 9"
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 10"
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 11"
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 12"
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 13"
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 14"
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 15"
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr "Zdefiniowany przez u¿ytkownika kod b³êdu 16"
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr "B³±d systemowy bez errno"
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr "Nieznany b³±d systemu"
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr "Koniec pliku"
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr "Nieznany kod b³êdu"
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr "Sk³adnia: %s B£¡D-GPG [...]\n"
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr "%s: uwaga: nie rozpoznano %s\n"
diff --git a/libgpg-error-1.10/po/quot.sed b/libgpg-error-1.10/po/quot.sed
new file mode 100644
index 0000000..0122c46
--- /dev/null
+++ b/libgpg-error-1.10/po/quot.sed
@@ -0,0 +1,6 @@
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
diff --git a/libgpg-error-1.10/po/remove-potcdate.sin b/libgpg-error-1.10/po/remove-potcdate.sin
new file mode 100644
index 0000000..2436c49
--- /dev/null
+++ b/libgpg-error-1.10/po/remove-potcdate.sin
@@ -0,0 +1,19 @@
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
diff --git a/libgpg-error-1.10/po/ro.gmo b/libgpg-error-1.10/po/ro.gmo
new file mode 100644
index 0000000..66e3c36
--- /dev/null
+++ b/libgpg-error-1.10/po/ro.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/ro.po b/libgpg-error-1.10/po/ro.po
new file mode 100644
index 0000000..033d484
--- /dev/null
+++ b/libgpg-error-1.10/po/ro.po
@@ -0,0 +1,1130 @@
+# Mesajele în limba românã pentru libgpg-error.
+# Copyright (C) 2005 Free Software Foundation, Inc.
+# Acest fiºier este distribuit sub aceeaºi licenþã ca ºi pachetul libgpg-error.
+# Laurentiu Buzdugan <lbuz@rolix.org>, 2005.
+#
+#
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.1\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2009-08-20 09:00+0200\n"
+"Last-Translator: Laurentiu Buzdugan <lbuz@rolix.org>\n"
+"Language-Team: Romanian <translation-team-ro@lists.sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=ISO-8859-2\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "Sursã nespecificatã"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GnuPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GpgSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "GPG Agent"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr "Introducere pin (pinentry)"
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr "Keybox"
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr "Dirmngr"
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr ""
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr ""
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr ""
+
+#: src/err-sources.h:43
+#, fuzzy
+msgid "Any source"
+msgstr "Sursã necunoscutã"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "Sursã definitã de utilizator 1"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "Sursã definitã de utilizator 2"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "Sursã definitã de utilizator 3"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "Sursã definitã de utilizator 4"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "Sursã necunoscutã"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "Succes"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "Eroare generalã"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "Pachet necunoscut"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "versiune necunoscutã în pachet"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "Algoritm cu cheie publicã invalid"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "Algoritm rezumat invalid"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "Cheie publicã incorectã"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "Cheie secretã incorectã"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "Semnãturã incorectã"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "Nici o cheie publicã"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "Eroare checksum"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "Frazã-parolã incorectã"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "Algoritm cifrare invalid"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr "Inel de chei deschis"
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "Pachet invalid"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr "Armurã invalidã"
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "Nici un ID utilizator."
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "Nici o cheie secretã"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "A fost folositã o cheie secretã greºitã"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "Cheie de sesiune incorectã"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "Algoritm compresie necunoscut"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "Numãrul nu este prim"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "Valoare de encodare invalidã"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "Schemã de cifrare invalidã"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "Schemã de semnãturi invalidã"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "Argument invalid"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "Nici o valoare"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "Nu a fost gãsit(ã)"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "Valoarea nu a fost gãsitã"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "Eroare de sintaxã"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "Valoare MPI incorectã"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "Frazã-parolã invalidã"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr "Clasã semnãturi invalidã"
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "Resurse epuizate"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "Inel de chei invalid"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "Eroare bazã de date încredere"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "Certificat incorect"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "ID utilizator invalid"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "Eroare neaºteptatã"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "Conflict de timp"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "Eroare server de chei"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "Algoritm cheie publicã greºit"
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr "Tribut lui D. A."
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "Cheie de cifrare slabã"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "Lungime cheie invalidã"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "Argument invalid"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "Eroare de sintaxã în URI"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "URI incorect"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "Eroare reþea"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "Gazdã necunoscutã"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "Auto-test eºuat"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "Date necifrate"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "Date neprocesate"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "Cheie publicã de nefolosit"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "cheie secretã de nefolosit"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "Valoare invalidã"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "Lanþ certificate incorect"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "Certificat lipsã"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "Nici o datã"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "Bug"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "Nu este suportat(ã)"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "Cod operaþie invalid"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "Pauzã"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "Eroare internã"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "EOF (gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "Obiect invalid"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "Obiectul furnizat e prea scurt"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "Obiectul furnizat e prea larg"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "Articol lipsã în obiect"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "Nu a fost implementat(ã)"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr "Folosire în conflict"
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "Mod cifru invalid"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr "Atribut invalid"
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr "Handle invalid"
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "Rezultat invalid"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "Linie incompletã"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "Rãspuns invalid"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "Nu ruleazã nici un agent"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "eroare agent"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "Date invalide"
+
+#: src/err-codes.h:108
+#, fuzzy
+msgid "Unspecific Assuan server fault"
+msgstr "Eroare server Assuan"
+
+#: src/err-codes.h:109
+#, fuzzy
+msgid "General Assuan error"
+msgstr "Eroare generalã"
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr "Cheie de sesiune invalidã"
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr "Expresie-S invalidã"
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr "Algoritm nesuportat"
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr "Nici introducere pin (pinentry)"
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr "eroare introducere pin (pinentry) "
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr "PIN incorect"
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr "Nume invalid"
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr "Date incorecte"
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr "Parametru invalid"
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr "Card greºit"
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr "Nici un dirmngr"
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr "eroare dirmngr"
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr "Certificat revocat"
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr "Nici un CRL cunoscut"
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr "CRL prea vechi"
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr "Linie prea lungã"
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr "Nu este de încredere"
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr "Operaþiune anulatã"
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr "Certificat CA incorect"
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr "Certificat expirat"
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr "Certificat prea recent"
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr "Certificat nesuportat"
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr "Expresie-S necunoscutã"
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr "Protecþie nesuportatã"
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr "Protecþie coruptã"
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr "Nume ambiguu"
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr "Eroare card"
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr "Este necesarã resetarea cardului"
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr "Card scos"
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr "Card invalid"
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr "Cardul nu este prezent"
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr "Nici o aplicaþie PKCS15"
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr "Neconfirmat(ã)"
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr "Eroare de configurare"
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr "Nici o potrivire de politici"
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr "Index invalid"
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr "ID invalid"
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr "Nici un daemon SmartCard"
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr "Eroare daemon SmartCard"
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr "Protocol nesuportat"
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr "Metodã PIN incorectã"
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr "Card neiniþializat"
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr "Operaþie nesuportatã"
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr "Folosire cheie greºitã"
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr "Nu a fost gãsit nimic"
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr "Tip de blob incorect"
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr "Valoare lipsã"
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr "Problemã hardware"
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr "PIN blocat"
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr "Condiþii de folosire nesatisfãcute"
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr "PIN-urile nu sunt sincronizate"
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr "CRL invalid"
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr "Eroare BER"
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr "BER invalid"
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr "Elementul nu a fost gãsit"
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr "Identificator nu a fost gãsit"
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr "Etichetã invalidã"
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr "Lungime invalidã"
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr "Informaþii cheie invalide"
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr "Etichetã neaºteptatã"
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr "Nu e encodat DER"
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr "Nici un obiect CMS"
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr "Obiect CMS invalid"
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr "Obiect CMS necunoscut"
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr "Obiect CMS nesuportat"
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr "Encodare nesuportatã"
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr "Versiune CMS nesuportatã"
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr "Algoritm necunoscut"
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr "Motor cifrare invalid"
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr "Cheia publicã nu este de încredere"
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr "Decriptarea a eºuat"
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr "Cheie expiratã"
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr "Semnãturã expiratã"
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr "Problemã de encodare"
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr "Stare invalidã"
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr "Valoare dublã"
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr "Acþiune lipsã"
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr "Modulul ASN.1 nu a fost gãsit"
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr "ªir OID invalid"
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr "Timp invalid"
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr "Obiect CRL invalid"
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr "Versiune CRL nesuportatã"
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr "Obiect certificat incorect"
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr "Nume necunoscut"
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr "O funcþie locale a eºuat"
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr "Neforþat(ã)"
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr "Violare de protocol"
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr "MAC invalid"
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr "Cerere invalidã"
+
+#: src/err-codes.h:199
+#, fuzzy
+msgid "Unknown extension"
+msgstr "Expresie-S necunoscutã"
+
+#: src/err-codes.h:200
+#, fuzzy
+msgid "Unknown critical extension"
+msgstr "Expresie-S necunoscutã"
+
+#: src/err-codes.h:201
+#, fuzzy
+msgid "Locked"
+msgstr "Neforþat(ã)"
+
+#: src/err-codes.h:202
+#, fuzzy
+msgid "Unknown option"
+msgstr "Expresie-S necunoscutã"
+
+#: src/err-codes.h:203
+#, fuzzy
+msgid "Unknown command"
+msgstr "Cod de eroare necunoscut"
+
+#: src/err-codes.h:204
+#, fuzzy
+msgid "Not operational"
+msgstr "Operaþie nesuportatã"
+
+#: src/err-codes.h:205
+#, fuzzy
+msgid "No passphrase given"
+msgstr "Frazã-parolã incorectã"
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr ""
+
+#: src/err-codes.h:207
+#, fuzzy
+msgid "Not enabled"
+msgstr "Neforþat(ã)"
+
+#: src/err-codes.h:208
+#, fuzzy
+msgid "No crypto engine"
+msgstr "Motor cifrare invalid"
+
+#: src/err-codes.h:209
+#, fuzzy
+msgid "Missing key"
+msgstr "Valoare lipsã"
+
+#: src/err-codes.h:210
+#, fuzzy
+msgid "Too many objects"
+msgstr "Nici un obiect CMS"
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr ""
+
+#: src/err-codes.h:212
+#, fuzzy
+msgid "Not initialized"
+msgstr "Card neiniþializat"
+
+#: src/err-codes.h:213
+#, fuzzy
+msgid "Missing issuer certificate"
+msgstr "Certificat lipsã"
+
+#: src/err-codes.h:214
+#, fuzzy
+msgid "Operation fully cancelled"
+msgstr "Operaþiune anulatã"
+
+#: src/err-codes.h:215
+#, fuzzy
+msgid "Operation not yet finished"
+msgstr "Operaþiune anulatã"
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr "Buffer prea scurt"
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr "Specificarea lungimii invalidã în expresia-S"
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr "ªir prea lung în expresia-S"
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr "Parantezã fãrã pereche în expresia-S"
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr "Expresia-S nu este canonicã"
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr "Caracter invalid în expresia-S"
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr "Ghilimele incorecte în expresia-S"
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr "Prefix zero în expresia-S"
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr "Indicaþii de afiºare încuibãrite în expresia-S"
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr "Indicaþii de afiºare fãrã pereche"
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr "Punctuaþie rezervatã neaºteptatã în expresia-S"
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr "Caracter hexazecimal incorect în expresia-S"
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr "Numere hexazecimale ciudate în expresia-S"
+
+#: src/err-codes.h:229
+msgid "Bad octal character in S-expression"
+msgstr "Caracter octal incorect în expresia-S"
+
+#: src/err-codes.h:230
+#, fuzzy
+msgid "General IPC error"
+msgstr "Eroare generalã"
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr ""
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr ""
+
+#: src/err-codes.h:233
+#, fuzzy
+msgid "Invalid IPC response"
+msgstr "Rãspuns invalid"
+
+#: src/err-codes.h:234
+#, fuzzy
+msgid "Invalid value passed to IPC"
+msgstr "Valoare invalidã"
+
+#: src/err-codes.h:235
+#, fuzzy
+msgid "Incomplete line passed to IPC"
+msgstr "Linie incompletã"
+
+#: src/err-codes.h:236
+#, fuzzy
+msgid "Line passed to IPC too long"
+msgstr "Linie prea lungã"
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr ""
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr ""
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr ""
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr ""
+
+#: src/err-codes.h:243
+#, fuzzy
+msgid "IPC read error"
+msgstr "Eroare card"
+
+#: src/err-codes.h:244
+#, fuzzy
+msgid "IPC write error"
+msgstr "Eroare card"
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr ""
+
+#: src/err-codes.h:246
+#, fuzzy
+msgid "Unexpected IPC command"
+msgstr "Etichetã neaºteptatã"
+
+#: src/err-codes.h:247
+#, fuzzy
+msgid "Unknown IPC command"
+msgstr "Cod de eroare necunoscut"
+
+#: src/err-codes.h:248
+#, fuzzy
+msgid "IPC syntax error"
+msgstr "Eroare de sintaxã"
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr ""
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr ""
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr ""
+
+#: src/err-codes.h:252
+#, fuzzy
+msgid "IPC parameter error"
+msgstr "Eroare card"
+
+#: src/err-codes.h:253
+#, fuzzy
+msgid "Unknown IPC inquire"
+msgstr "Sursã necunoscutã"
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr "Cod de eroare definit de utilizator 1"
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr "Cod de eroare definit de utilizator 2"
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr "Cod de eroare definit de utilizator 3"
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr "Cod de eroare definit de utilizator 4"
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr "Cod de eroare definit de utilizator 5"
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr "Cod de eroare definit de utilizator 6"
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr "Cod de eroare definit de utilizator 7"
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr "Cod de eroare definit de utilizator 8"
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr "Cod de eroare definit de utilizator 9"
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr "Cod de eroare definit de utilizator 10"
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr "Cod de eroare definit de utilizator 11"
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr "Cod de eroare definit de utilizator 12"
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr "Cod de eroare definit de utilizator 13"
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr "Cod de eroare definit de utilizator 14"
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr "Cod de eroare definit de utilizator 15"
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr "Cod de eroare definit de utilizator 16"
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr ""
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr "Eroare de sistem necunoscutã"
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr "Sfârºit de fiºier"
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr "Cod de eroare necunoscut"
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr "Folosire: %s EROARE-GPG [...]\n"
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr "%s: avertisment: nu am putut recunoaºte %s\n"
+
+#~ msgid "Assuan error"
+#~ msgstr "Eroare Assuan"
diff --git a/libgpg-error-1.10/po/stamp-po b/libgpg-error-1.10/po/stamp-po
new file mode 100644
index 0000000..9788f70
--- /dev/null
+++ b/libgpg-error-1.10/po/stamp-po
@@ -0,0 +1 @@
+timestamp
diff --git a/libgpg-error-1.10/po/sv.gmo b/libgpg-error-1.10/po/sv.gmo
new file mode 100644
index 0000000..0e14fe9
--- /dev/null
+++ b/libgpg-error-1.10/po/sv.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/sv.po b/libgpg-error-1.10/po/sv.po
new file mode 100644
index 0000000..700ef97
--- /dev/null
+++ b/libgpg-error-1.10/po/sv.po
@@ -0,0 +1,1102 @@
+# Swedish translation for libgpg-error.
+# Copyright (C) 2006, 2007, 2009 Free Software Foundation, Inc.
+# This file is distributed under the same license as the libgpg-error package.
+# Daniel Nylander <po@danielnylander.se>, 2006, 2007, 2009.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.7\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2009-06-25 07:54+0100\n"
+"Last-Translator: Daniel Nylander <po@danielnylander.se>\n"
+"Language-Team: Swedish <tp-sv@listor.tp-sv.se>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "Ospecificerad källa"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GnuPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GpgSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "GPG Agent"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr "PIN-inmatning"
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr "Nyckellåda"
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr "Dirmngr"
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr "GPA"
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr "Kleopatra"
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr ""
+
+#: src/err-sources.h:43
+msgid "Any source"
+msgstr "Alla källor"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "Användardefinierad källa 1"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "Användardefinierad källa 2"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "Användardefinierad källa 3"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "Användardefinierad källa 4"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "Okänd källa"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "Lyckades"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "Allmänt fel"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "Okänt paket"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "Okänd version i paket"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "Ogiltig publik nyckel-algoritm"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "Ogiltig sammandragsalgoritm"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "Felaktig publik nyckel"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "Felaktig hemlig nyckel"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "Felaktig signatur"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "Ingen publik nyckel"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "Kontrollsummefel"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "Felaktig lösenfras"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "Ogiltig chifferalgoritm"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr "Nyckelring är öppnad"
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "Ogiltigt paket"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr "Ogiltigt ASCII-skal"
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "Inget användar-id"
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "Ingen hemlig nyckel"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "Fel hemlig nyckel använd"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "Felaktig sessionsnyckel"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "Okänd komprimeringsalgoritm"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "Tal är inte ett primtal"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "Ogiltig kodningsmetod"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "Ogiltigt krypteringsschema"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "Ogiltigt signaturschema"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "Ogiltigt attribut"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "Inget värde"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "Hittades inte"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "Värdet hittades inte"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "Syntaxfel"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "Felaktigt MPI-värde"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "Ogiltig lösenfras"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr "Ogiltig signaturklass"
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "Resurser överansträngda"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "Ogiltig nyckelring"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "Fel i tillitsdatabas"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "Felaktigt certifikat"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "Ogiltig användaridentitet"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "Oväntat fel"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "Tidskonflikt"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "Fel i nyckelserver"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "Fel publik nyckel-algoritm"
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr "Hyllning till D. A."
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "Svag krypteringsnyckel"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "Ogiltig nyckellängd"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "Ogiltigt argument"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "Syntaxfel i uri"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "Ogiltig uri"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "Nätverksfel"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "Okänd värd"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "Självtestning misslyckades"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "Data är inte krypterat"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "Data inte behandlat"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "Oanvändbar publik nyckel"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "Oanvändbar hemlig nyckel"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "Ogiltigt värde"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "Felaktig certifikatkedja"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "Saknar certifikat"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "Inget data"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "Fel"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "Stöds inte"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "Ogiltig åtgärdskod"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "Tidsgräns"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "Internt fel"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "Slut på filen (gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "Ogiltigt objekt"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "Tillhandahållet objekt är för kort"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "Tillhandahållet objekt är för stort"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "Saknar post i objekt"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "Inte implementerad"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr "Konflikt i användningen"
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "Ogiltigt chifferläge"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr "Ogiltig flagga"
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr "Ogiltig hanterare"
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "Resultat nerskalat"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "Ofullständig rad"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "Ogiltigt svar"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "Ingen agent kör"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "agentfel"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "Ogiltig data"
+
+#: src/err-codes.h:108
+msgid "Unspecific Assuan server fault"
+msgstr "Ospecificerat Assuan-serverfel"
+
+#: src/err-codes.h:109
+msgid "General Assuan error"
+msgstr "Allmänt Assuan-fel"
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr "Ogiltig sessionsnyckel"
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr "Ogiltigt S-uttryck"
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr "Algoritmen stöds inte"
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr "Ingen PIN-inmatning"
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr "PIN-inmatningsfel"
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr "Felaktig PIN-kod"
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr "Ogiltigt namn"
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr "Felaktigt data"
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr "Ogiltig parameter"
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr "Fel kort"
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr "Ingen dirmngr"
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr "dirmngr-fel"
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr "Certifikatet är spärrat"
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr "Ingen känd CRL"
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr "CRL för gammal"
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr "Raden är för lång"
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr "Inte betrodd"
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr "Åtgärden avbröts"
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr "Felaktigt CA-certifikat"
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr "Certifikatet har gått ut"
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr "Certifikatet är för ungt"
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr "Certifikatet stöds inte"
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr "Okänt S-uttryck"
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr "Skyddet stöds inte"
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr "Skadat skydd"
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr "Tvetydigt namn"
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr "Kortfel"
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr "Nollställning av kort krävs"
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr "Kort borttaget"
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr "Ogiltigt kort"
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr "Kortet inte inmatat"
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr "Inget PKCS15-program"
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr "Inte bekräftad"
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr "Konfigurationsfel"
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr "Ingen policyträff"
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr "Ogiltigt index"
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr "Ogiltigt id"
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr "Ingen SmartCard-demon"
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr "Fel i SmartCard-demon"
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr "Protokollet stöds inte"
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr "Felaktig PIN-metod"
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr "Kortet är inte initierat"
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr "Åtgärden stöds inte"
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr "Fel nyckelanvändning"
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr "Ingenting hittades"
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr "Felaktig blob-typ"
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr "Saknar värde"
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr "Hårdvaruproblem"
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr "PIN-kod blockerad"
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr "Användningsvillkoren tillfredsställs inte"
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr "PIN-koderna är inte synkroniserade"
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr "Ogiltig CRL"
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr "BER-fel"
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr "Ogiltg BER"
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr "Elementet hittades inte"
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr "Identifieraren hittades inte"
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr "Ogiltig tagg"
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr "Ogiltig längd"
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr "Ogiltig nyckelinformation"
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr "Oväntad tagg"
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr "Inte DER-kodat"
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr "Inget CMS-objekt"
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr "Ogiltigt CMS-objekt"
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr "Okänt CMS-objekt"
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr "CMS-objektet stöds inte"
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr "Kodningen stöds inte"
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr "CMS-versionen stöds inte"
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr "Okänd algoritm"
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr "Ogiltig krypteringsmotor"
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr "Publika nyckeln inte betrodd"
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr "Dekryptering misslyckades"
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr "Nyckeln har gått ut"
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr "Signaturen har gått ut"
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr "Kodningsproblem"
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr "Ogiltigt tillstånd"
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr "Dubblettvärde"
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr "Saknar åtgärd"
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr "ASN.1-modulen hittades inte"
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr "Ogiltig OID-sträng"
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr "Ogiltig tid"
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr "Ogiltigt CRL-objekt"
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr "CRL-versionen stöds inte"
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr "Ogiltigt certifikatobjekt"
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr "Okänt namn"
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr "En lokalfunktion misslyckades"
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr "Inte låst"
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr "Protokollöverträdelse"
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr "Ogiltig MAC"
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr "Ogiltig begäran"
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr "Okänd utökning"
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr "Okänd kritiskt tillägg"
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr "Låst"
+
+#: src/err-codes.h:202
+msgid "Unknown option"
+msgstr "Okänd flagga"
+
+#: src/err-codes.h:203
+msgid "Unknown command"
+msgstr "Okänt kommando"
+
+#: src/err-codes.h:204
+msgid "Not operational"
+msgstr "Fungerar inte"
+
+#: src/err-codes.h:205
+msgid "No passphrase given"
+msgstr "Ingen lösenfras angiven"
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr "Ingen pinkod angiven"
+
+#: src/err-codes.h:207
+#, fuzzy
+msgid "Not enabled"
+msgstr "Inte låst"
+
+#: src/err-codes.h:208
+#, fuzzy
+msgid "No crypto engine"
+msgstr "Ogiltig krypteringsmotor"
+
+#: src/err-codes.h:209
+#, fuzzy
+msgid "Missing key"
+msgstr "Saknar värde"
+
+#: src/err-codes.h:210
+#, fuzzy
+msgid "Too many objects"
+msgstr "Inget CMS-objekt"
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr ""
+
+#: src/err-codes.h:212
+#, fuzzy
+msgid "Not initialized"
+msgstr "Kortet är inte initierat"
+
+#: src/err-codes.h:213
+#, fuzzy
+msgid "Missing issuer certificate"
+msgstr "Saknar certifikat"
+
+#: src/err-codes.h:214
+#, fuzzy
+msgid "Operation fully cancelled"
+msgstr "Åtgärden avbröts"
+
+#: src/err-codes.h:215
+msgid "Operation not yet finished"
+msgstr "Åtgärden är ännu inte färdig"
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr "Buffert för liten"
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr "Ogiltig längdangivare i S-uttryck"
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr "Sträng för lång i S-uttryck"
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr "Omatchad parentes i S-uttryck"
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr "S-uttryck inte korrekt"
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr "Felaktigt tecken i S-uttryck"
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr "Fel citering i S-uttryck"
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr "Nollprefix i S-uttryck"
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr "Nästlade visningstips i S-uttryck"
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr "Omatchade visningstips"
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr "Oväntat reserverat skiljetecken i S-uttryck"
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr "Felaktigt hexadecimalt tecken i S-uttryck"
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr "Udda hexadecimala tal i S-uttryck"
+
+#: src/err-codes.h:229
+#, fuzzy
+msgid "Bad octal character in S-expression"
+msgstr "Felaktigt oktadecimalt tecken i S-uttryck"
+
+#: src/err-codes.h:230
+msgid "General IPC error"
+msgstr "Allmänt IPC-fel"
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr "IPC-acceptanrop misslyckades"
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr "IPC-anslutningsanrop misslyckades"
+
+#: src/err-codes.h:233
+msgid "Invalid IPC response"
+msgstr "Ogiltigt IPC-svar"
+
+#: src/err-codes.h:234
+msgid "Invalid value passed to IPC"
+msgstr "Ogiltigt värde skickat till IPC"
+
+#: src/err-codes.h:235
+msgid "Incomplete line passed to IPC"
+msgstr "Ofullständig rad skickad till IPC"
+
+#: src/err-codes.h:236
+msgid "Line passed to IPC too long"
+msgstr "Raden skickad till IPC är för lång"
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr "Nästlade IPC-kommandon"
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr "Inget datasvarsanrop i IPC"
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr "Inget datafrågeanrop i IPC"
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr "Inte en IPC-server"
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr "Inte en IPC-klient"
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr "Problem med att starta IPC-server"
+
+#: src/err-codes.h:243
+msgid "IPC read error"
+msgstr "IPC-läsfel"
+
+#: src/err-codes.h:244
+msgid "IPC write error"
+msgstr "IPC-skrivfel"
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr "För mycket data för IPC-lager"
+
+#: src/err-codes.h:246
+msgid "Unexpected IPC command"
+msgstr "Oväntat IPC-kommando"
+
+#: src/err-codes.h:247
+msgid "Unknown IPC command"
+msgstr "Okänt IPC-kommando"
+
+#: src/err-codes.h:248
+msgid "IPC syntax error"
+msgstr "IPC-syntaxfel"
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr "IPC-anropet har avbrutits"
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr "Ingen inmatningskälla för IPC"
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr "Ingen utmatningskälla för IPC"
+
+#: src/err-codes.h:252
+msgid "IPC parameter error"
+msgstr "IPC-parameterfel"
+
+#: src/err-codes.h:253
+msgid "Unknown IPC inquire"
+msgstr "Okänd IPC-fråga"
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr "Användardefinierad felkod 1"
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr "Användardefinierad felkod 2"
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr "Användardefinierad felkod 3"
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr "Användardefinierad felkod 4"
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr "Användardefinierad felkod 5"
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr "Användardefinierad felkod 6"
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr "Användardefinierad felkod 7"
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr "Användardefinierad felkod 8"
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr "Användardefinierad felkod 9"
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr "Användardefinierad felkod 10"
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr "Användardefinierad felkod 11"
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr "Användardefinierad felkod 12"
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr "Användardefinierad felkod 13"
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr "Användardefinierad felkod 14"
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr "Användardefinierad felkod 15"
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr "Användardefinierad felkod 16"
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr "Systemfel utan felnummer"
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr "Okänt systemfel"
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr "Slut på fil"
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr "Okänd felkod"
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr "Användning: %s GPG-ERROR [...]\n"
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr "%s: varning: kände inte igen %s\n"
diff --git a/libgpg-error-1.10/po/vi.gmo b/libgpg-error-1.10/po/vi.gmo
new file mode 100644
index 0000000..de05931
--- /dev/null
+++ b/libgpg-error-1.10/po/vi.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/vi.po b/libgpg-error-1.10/po/vi.po
new file mode 100644
index 0000000..a74fe94
--- /dev/null
+++ b/libgpg-error-1.10/po/vi.po
@@ -0,0 +1,1104 @@
+# Vietnamese translation for Lib. GPG Error.
+# Copyright © 2009 Free Software Foundation, Inc.
+# This file is distributed under the same license as the libgpg-error package.
+# Clytie Siddall <clytie@riverland.net.au>, 2006-2009.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.7\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2009-09-19 18:34+0930\n"
+"Last-Translator: Clytie Siddall <clytie@riverland.net.au>\n"
+"Language-Team: Vietnamese <vi-VN@googlegroups.com>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+"X-Generator: LocFactoryEditor 1.8\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "Nguồn chưa ghi rõ"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GnuPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GpgSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "Tác nhân GPG"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr "Pinentry"
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr "Keybox"
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr "Dirmngr"
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr "GPA"
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr "Kleopatra"
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr ""
+
+#: src/err-sources.h:43
+msgid "Any source"
+msgstr "Bất cứ nguồn nào"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "Nguồn tự xác định 1"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "Nguồn tự xác định 2"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "Nguồn tự xác định 3"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "Nguồn tự xác định 4"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "Nguồn không rõ"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "Thành công"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "Lỗi chung"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "Gói tin không rõ"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "Gặp phiên bản không rõ trong gói tin"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "Thuật toán khoá công không hợp lệ"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "Thuật toán bộ tóm tắt (digest) không hợp lệ"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "Khoá công sai"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "Khoá bí mật sai"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "Chữ ký sai"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "Không có khoá công"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "Lỗi tổng kiểm tra"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "Cụm từ mật khẩu sai"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "Thuật toán mật mã không hợp lệ"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr "Vòng khoá đã mở"
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "Gói tin không hợp lệ"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr "Bọc sắt không hợp lệ"
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "Không có mã số người dùng"
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "Không có khoá bí mật"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "Đã dùng khoá bí mật không đúng"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "Khoá buổi hợp sai"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "Thuật toán nén không rõ"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "Số không phải nguyên tố"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "Phương pháp mã hoá không hợp lệ"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "Lược đồ mật mã hoá không hợp lệ"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "Lược đồ chữ ký không hợp lệ"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "Thuộc tính không hợp lệ"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "Không có giá trị"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "Không tìm thấy"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "Không tìm thấy giá trị"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "Lỗi cú pháp"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "Giá trị MPI sai"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "Cụm từ mật khẩu không hợp lệ"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr "Hạng chữ ký không hợp lệ"
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "Cạn tài nguyên"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "Vòng khoá không hợp lệ"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "Lỗi CSDL tin cậy"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "Chứng nhận sai"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "Mã số người dùng không hợp lệ"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "Gặp lỗi bất thường"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "Giờ xung đột"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "Lỗi máy phục vụ khoá"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "Thuật toán khoá công không đúng"
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr "Cống cho D. A."
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "Khoá mật mã yếu"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "Chiều dài khoá không hợp lệ"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "Đối số không hợp lệ"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "Lỗi cú pháp trong URI"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "URI không hợp lệ"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "Lỗi chạy mạng"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "Không nhận ra máy chủ"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "Lỗi tự thử"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "Chưa mật mã dữ liệu"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "Chưa xử lý dữ liệu"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "Khoá công vô ích"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "Khoá bí mật vô ích"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "Giá trị không hợp lệ"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "Dây chứng nhận sai"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "Chứng nhận còn thiếu"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "Không có dữ liệu"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "Lỗi"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "Không được hỗ trợ"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "Mã thao tác không hợp lệ"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "Quá giờ"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "Lỗi nội bộ"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "Kết thúc tập tin (gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "Đối tượng không hợp lệ"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "Đã cung cấp một đối tượng quá ngắn"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "Đã cung cấp một đối tượng quá lớn"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "Thiếu mục trong đối tượng"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "Không được thực hiện"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr "Cách sử dụng xung đột"
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "Chế độ mật mã không hợp lệ"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr "Cờ không hợp lệ"
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr "Bộ quản lý không hợp lệ"
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "Kết quả bị cắt ngắn"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "Dòng không hoàn toàn"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "Đáp ứng không hợp lệ"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "Không có tác nhân đang chạy"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "lỗi tác nhân"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "Dữ liệu không hợp lệ"
+
+#: src/err-codes.h:108
+msgid "Unspecific Assuan server fault"
+msgstr "Lỗi máy phục vụ Assuan chung"
+
+#: src/err-codes.h:109
+msgid "General Assuan error"
+msgstr "Lỗi Assuan chung"
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr "Khoá buổi hợp không hợp lệ"
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr "Biểu thức S không hợp lệ"
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr "Thuật toán không được hỗ trợ"
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr "Không có pinentry"
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr "Lỗi pinentry"
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr "PIN sai"
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr "Tên không hợp lệ"
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr "Dữ liệu sai"
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr "Tham số không hợp lệ"
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr "Thẻ không đúng"
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr "Không có dirmngr"
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr "Lỗi dirmngr"
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr "Chứng nhận bị thu hồi"
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr "Không co CRL đã biết"
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr "CRL quá cũ"
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr "Dòng quá dài"
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr "Không tin cậy"
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr "Thao tác bị hủy bỏ"
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr "Chứng nhận CA (nhà cầm quyền chứng nhận) sai"
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr "Chứng nhận đã hết hạn"
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr "Chứng nhận quá mới"
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr "Chứng nhận không được hỗ trợ"
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr "Biểu thức S không rõ"
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr "Sự bảo vệ không được hỗ trợ"
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr "Sự bảo vệ bị hỏng"
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr "Tên mờ hồ"
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr "Lỗi thẻ"
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr "Cần thiết lập lại thẻ"
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr "Thẻ bị gỡ bỏ"
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr "Thẻ không hợp lệ"
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr "Không có thẻ"
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr "Không có ứng dụng PKCS15"
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr "Chưa xác nhận"
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr "Lỗi cấu hình"
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr "Không có chính sách tương ứng"
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr "Chỉ mục không hợp lệ"
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr "Mã số không hợp lệ"
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr "Không có trình nền Thẻ Khéo"
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr "Lỗi trình nền Thẻ Khéo"
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr "Giao thức không được hỗ trợ"
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr "Phương pháp PIN sai"
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr "Chưa sơ khởi thẻ"
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr "Thao tác không được hỗ trợ"
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr "Sai dùng khoá"
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr "Không tìm thấy"
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr "Sai kiểu blob"
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr "Thiếu giá trị"
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr "Lỗi phần cứng"
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr "PIN bị chặn"
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr "Chưa thỏa mãn các điều kiện dùng"
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr "Các PIN chưa đồng bộ"
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr "CRL không hợp lệ"
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr "Lỗi BER"
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr "BER không hợp lệ"
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr "Không tìm thấy phần tử"
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr "Không tìm thấy bộ nhận diện"
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr "Thẻ (tag) không hợp lệ"
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr "Chiều dài không hợp lệ"
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr "Thông tin khoá không hợp lệ"
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr "Thẻ (tag) bất thường"
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr "Không phải mã hoá DER"
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr "Không có đối tượng CMS"
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr "Đối tượng CMS không hợp lệ"
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr "Đối tượng CMS không rõ"
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr "Đối tượng CMS không được hỗ trợ"
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr "Bảng mã không được hỗ trợ"
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr "Phiên bản CMS không được hỗ trợ"
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr "Thuật toán không rõ"
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr "Cơ chế mật mã không hợp lệ"
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr "Khoá công không tin cậy"
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr "Lỗi giải mật mã"
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr "Khoá hết hạn"
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr "Chữ ký hết hạn"
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr "Lỗi mã hoá"
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr "Tình trạng không hợp lệ"
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr "Giá trị trùng"
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr "Thiếu hành động"
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr "Không tìm thấy mô-đun ASN.1"
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr "Chuỗi OID không hợp lệ"
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr "Thời gian không hợp lệ"
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr "Đối tượng CRL không hợp lệ"
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr "Phiên bản CRL không được hỗ trợ"
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr "Đối tượng chứng nhận không hợp lệ"
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr "Tên không rõ"
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr "Một hàm miền địa phương bị lỗi"
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr "Không phải bị khoá"
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr "Vi phạm giao thức"
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr "MAC không hợp lệ"
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr "Yêu cầu không hợp lệ"
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr "Phần mở rộng không rõ"
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr "Phần mở rộng nghiêm trọng không rõ"
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr "Bị khoá"
+
+#: src/err-codes.h:202
+msgid "Unknown option"
+msgstr "Tùy chọn không rõ"
+
+#: src/err-codes.h:203
+msgid "Unknown command"
+msgstr "Lệnh không rõ"
+
+#: src/err-codes.h:204
+msgid "Not operational"
+msgstr "Không hoạt động được"
+
+#: src/err-codes.h:205
+msgid "No passphrase given"
+msgstr "Chưa đưa ra cụm từ mật khẩu"
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr "Chưa đưa ra số cá nhân PIN"
+
+#: src/err-codes.h:207
+#, fuzzy
+msgid "Not enabled"
+msgstr "Không phải bị khoá"
+
+#: src/err-codes.h:208
+#, fuzzy
+msgid "No crypto engine"
+msgstr "Cơ chế mật mã không hợp lệ"
+
+#: src/err-codes.h:209
+#, fuzzy
+msgid "Missing key"
+msgstr "Thiếu giá trị"
+
+#: src/err-codes.h:210
+#, fuzzy
+msgid "Too many objects"
+msgstr "Không có đối tượng CMS"
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr ""
+
+#: src/err-codes.h:212
+#, fuzzy
+msgid "Not initialized"
+msgstr "Chưa sơ khởi thẻ"
+
+#: src/err-codes.h:213
+#, fuzzy
+msgid "Missing issuer certificate"
+msgstr "Chứng nhận còn thiếu"
+
+#: src/err-codes.h:214
+#, fuzzy
+msgid "Operation fully cancelled"
+msgstr "Thao tác bị hủy bỏ"
+
+#: src/err-codes.h:215
+msgid "Operation not yet finished"
+msgstr "Thao tác chưa kết thúc"
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr "Vùng đệm quá ngắn"
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr "Chỉ thị chiều dài không hợp lệ trong biểu thức S"
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr "Chuỗi quá dài trong biểu thức S"
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr "Có dấu ngoặc chưa khớp trong biểu thức S"
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr "Biểu thức S không phải chuẩn tắc"
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr "Ký tự sai trong biểu thức S"
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr "Đoạn trích dẫn sai trong biểu thức S"
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr "Tiền tố số không trong biểu thức S"
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr "Có mẹo trình bày lồng nhau trong biểu thức S"
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr "Có mẹo trình bày chưa khớp"
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr "Có dấu chấm câu dành riêng bất thường trong biểu thức S"
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr "Ký tự thập lục sai trong biểu thức S"
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr "Có số thập lục lẻ trong biểu thức S"
+
+#: src/err-codes.h:229
+#, fuzzy
+msgid "Bad octal character in S-expression"
+msgstr "Ký tự bát phân sai trong biểu thức S"
+
+#: src/err-codes.h:230
+msgid "General IPC error"
+msgstr "Lỗi IPC chung"
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr "Lời gọi chấp nhận IPC bị lỗi"
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr "Lời gọi kết nối IPC bị lỗi"
+
+#: src/err-codes.h:233
+msgid "Invalid IPC response"
+msgstr "Đáp ứng IPC không hợp lệ"
+
+#: src/err-codes.h:234
+msgid "Invalid value passed to IPC"
+msgstr "Giá trị không hợp lệ được gửi cho IPC"
+
+#: src/err-codes.h:235
+msgid "Incomplete line passed to IPC"
+msgstr "Dòng không hoàn toàn được gửi cho IPC"
+
+#: src/err-codes.h:236
+msgid "Line passed to IPC too long"
+msgstr "Dòng quá dài được gửi cho IPC"
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr "Các câu lệnh IPC lồng nhau"
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr "Không có lời gọi ngược lại dữ liệu trong IPC"
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr "Không có lời gọi ngược lại yêu cầu trong IPC"
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr "Không phải trình phục vụ IPC"
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr "Không phải ứng dụng khách IPC"
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr "Gặp khó khăn trong việc khởi chạy trình phục vụ IPC"
+
+#: src/err-codes.h:243
+msgid "IPC read error"
+msgstr "Lỗi đọc IPC"
+
+#: src/err-codes.h:244
+msgid "IPC write error"
+msgstr "Lỗi ghi IPC"
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr "Quá nhiều dữ liệu cho lớp IPC"
+
+#: src/err-codes.h:246
+msgid "Unexpected IPC command"
+msgstr "Câu lệnh IPC bất thường"
+
+#: src/err-codes.h:247
+msgid "Unknown IPC command"
+msgstr "Câu lệnh IPC không rõ"
+
+#: src/err-codes.h:248
+msgid "IPC syntax error"
+msgstr "Lỗi cú pháp IPC"
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr "Lời gọi IPC bị thôi"
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr "Không có nguồn nhập vào cho IPC"
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr "Không có nguồn kết xuất cho IPC"
+
+#: src/err-codes.h:252
+msgid "IPC parameter error"
+msgstr "Lỗi tham số IPC"
+
+#: src/err-codes.h:253
+msgid "Unknown IPC inquire"
+msgstr "Yêu cầu IPC không rõ"
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr "Mã lỗi tự xác định 1"
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr "Mã lỗi tự xác định 2"
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr "Mã lỗi tự xác định 3"
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr "Mã lỗi tự xác định 4"
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr "Mã lỗi tự xác định 5"
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr "Mã lỗi tự xác định 6"
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr "Mã lỗi tự xác định 7"
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr "Mã lỗi tự xác định 8"
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr "Mã lỗi tự xác định 9"
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr "Mã lỗi tự xác định 10"
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr "Mã lỗi tự xác định 11"
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr "Mã lỗi tự xác định 12"
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr "Mã lỗi tự xác định 13"
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr "Mã lỗi tự xác định 14"
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr "Mã lỗi tự xác định 15"
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr "Mã lỗi tự xác định 16"
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr "Lỗi hệ thống không có số thứ tự lỗi"
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr "Gặp lỗi hệ thống không rõ"
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr "Kết thúc tập tin"
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr "Mã lỗi không rõ"
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr "Sử dụng: %s GPG-ERROR [...]\n"
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr "%s: cảnh báo : không thể nhận ra %s\n"
diff --git a/libgpg-error-1.10/po/zh_CN.gmo b/libgpg-error-1.10/po/zh_CN.gmo
new file mode 100644
index 0000000..b412a69
--- /dev/null
+++ b/libgpg-error-1.10/po/zh_CN.gmo
Binary files differ
diff --git a/libgpg-error-1.10/po/zh_CN.po b/libgpg-error-1.10/po/zh_CN.po
new file mode 100644
index 0000000..4729b0e
--- /dev/null
+++ b/libgpg-error-1.10/po/zh_CN.po
@@ -0,0 +1,1103 @@
+# Simplified Chinese translation to libgpg-error.
+# Copyright (C) 2009 Free Software Foundation, Inc.
+# This file is distributed under the same license as the libgpg-error package.
+# Aron Xu <happyaron.xu@gmail.com>, 2009.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: libgpg-error 1.7\n"
+"Report-Msgid-Bugs-To: translations@gnupg.org\n"
+"POT-Creation-Date: 2010-10-26 11:22+0200\n"
+"PO-Revision-Date: 2009-08-19 17:45+0800\n"
+"Last-Translator: Aron Xu <happyaron.xu@gmail.com>\n"
+"Language-Team: Chinese (simplified) <translation-team-zh-cn@lists."
+"sourceforge.net>\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=utf-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: src/err-sources.h:28
+msgid "Unspecified source"
+msgstr "未指定源"
+
+#: src/err-sources.h:29
+msgid "gcrypt"
+msgstr "gcrypt"
+
+#: src/err-sources.h:30
+msgid "GnuPG"
+msgstr "GnuPG"
+
+#: src/err-sources.h:31
+msgid "GpgSM"
+msgstr "GpgSM"
+
+#: src/err-sources.h:32
+msgid "GPG Agent"
+msgstr "GPG 代理"
+
+#: src/err-sources.h:33
+msgid "Pinentry"
+msgstr ""
+
+#: src/err-sources.h:34
+msgid "SCD"
+msgstr "SCD"
+
+#: src/err-sources.h:35
+msgid "GPGME"
+msgstr "GPGME"
+
+#: src/err-sources.h:36
+msgid "Keybox"
+msgstr ""
+
+#: src/err-sources.h:37
+msgid "KSBA"
+msgstr "KSBA"
+
+#: src/err-sources.h:38
+msgid "Dirmngr"
+msgstr ""
+
+#: src/err-sources.h:39
+msgid "GSTI"
+msgstr "GSTI"
+
+#: src/err-sources.h:40
+msgid "GPA"
+msgstr "GPA"
+
+#: src/err-sources.h:41
+msgid "Kleopatra"
+msgstr ""
+
+#: src/err-sources.h:42
+msgid "G13"
+msgstr ""
+
+#: src/err-sources.h:43
+msgid "Any source"
+msgstr "任何来源"
+
+#: src/err-sources.h:44
+msgid "User defined source 1"
+msgstr "用户定义的来源1"
+
+#: src/err-sources.h:45
+msgid "User defined source 2"
+msgstr "用户定义的来源2"
+
+#: src/err-sources.h:46
+msgid "User defined source 3"
+msgstr "用户定义的来源3"
+
+#: src/err-sources.h:47
+msgid "User defined source 4"
+msgstr "用户定义的来源4"
+
+#: src/err-sources.h:48
+msgid "Unknown source"
+msgstr "来源不明"
+
+#: src/err-codes.h:28
+msgid "Success"
+msgstr "成功"
+
+#: src/err-codes.h:29
+msgid "General error"
+msgstr "一般错误"
+
+#: src/err-codes.h:30
+msgid "Unknown packet"
+msgstr "未知的包"
+
+#: src/err-codes.h:31
+msgid "Unknown version in packet"
+msgstr "包中未知的版本"
+
+#: src/err-codes.h:32
+msgid "Invalid public key algorithm"
+msgstr "无效的公钥算法"
+
+#: src/err-codes.h:33
+msgid "Invalid digest algorithm"
+msgstr "无效的摘要算法"
+
+#: src/err-codes.h:34
+msgid "Bad public key"
+msgstr "损坏的公钥"
+
+#: src/err-codes.h:35
+msgid "Bad secret key"
+msgstr "损坏的密钥"
+
+#: src/err-codes.h:36
+msgid "Bad signature"
+msgstr "损坏的签名"
+
+#: src/err-codes.h:37
+msgid "No public key"
+msgstr "没有公钥"
+
+#: src/err-codes.h:38
+msgid "Checksum error"
+msgstr "校验错误"
+
+#: src/err-codes.h:39
+msgid "Bad passphrase"
+msgstr "损坏的密码"
+
+#: src/err-codes.h:40
+msgid "Invalid cipher algorithm"
+msgstr "无效的密码算法"
+
+#: src/err-codes.h:41
+msgid "Keyring open"
+msgstr ""
+
+#: src/err-codes.h:42
+msgid "Invalid packet"
+msgstr "无效的数据包"
+
+#: src/err-codes.h:43
+msgid "Invalid armor"
+msgstr ""
+
+#: src/err-codes.h:44
+msgid "No user ID"
+msgstr "没有用户ID"
+
+#: src/err-codes.h:45
+msgid "No secret key"
+msgstr "没有秘匙"
+
+#: src/err-codes.h:46
+msgid "Wrong secret key used"
+msgstr "使用了错误的密钥"
+
+#: src/err-codes.h:47
+msgid "Bad session key"
+msgstr "损坏的会话密钥"
+
+#: src/err-codes.h:48
+msgid "Unknown compression algorithm"
+msgstr "未知的压缩算法"
+
+#: src/err-codes.h:49
+msgid "Number is not prime"
+msgstr "不是素数"
+
+#: src/err-codes.h:50
+msgid "Invalid encoding method"
+msgstr "无效的编码方法"
+
+#: src/err-codes.h:51
+msgid "Invalid encryption scheme"
+msgstr "无效的加密方案"
+
+#: src/err-codes.h:52
+msgid "Invalid signature scheme"
+msgstr "无效的签名方案"
+
+#: src/err-codes.h:53
+msgid "Invalid attribute"
+msgstr "无效的属性"
+
+#: src/err-codes.h:54
+msgid "No value"
+msgstr "没有值"
+
+#: src/err-codes.h:55
+msgid "Not found"
+msgstr "未找到"
+
+#: src/err-codes.h:56
+msgid "Value not found"
+msgstr "没有发现值"
+
+#: src/err-codes.h:57
+msgid "Syntax error"
+msgstr "语法错误"
+
+#: src/err-codes.h:58
+msgid "Bad MPI value"
+msgstr "损坏的MPI 值"
+
+#: src/err-codes.h:59
+msgid "Invalid passphrase"
+msgstr "无效的密码"
+
+#: src/err-codes.h:60
+msgid "Invalid signature class"
+msgstr ""
+
+#: src/err-codes.h:61
+msgid "Resources exhausted"
+msgstr "内存耗尽"
+
+#: src/err-codes.h:62
+msgid "Invalid keyring"
+msgstr "无效的密钥环"
+
+#: src/err-codes.h:63
+msgid "Trust DB error"
+msgstr "信任数据库错误"
+
+#: src/err-codes.h:64
+msgid "Bad certificate"
+msgstr "损坏的证书"
+
+#: src/err-codes.h:65
+msgid "Invalid user ID"
+msgstr "无效的用户ID"
+
+#: src/err-codes.h:66
+msgid "Unexpected error"
+msgstr "意外错误"
+
+#: src/err-codes.h:67
+msgid "Time conflict"
+msgstr "时间冲突"
+
+#: src/err-codes.h:68
+msgid "Keyserver error"
+msgstr "密钥服务器错误"
+
+#: src/err-codes.h:69
+msgid "Wrong public key algorithm"
+msgstr "错误的公开密钥算法"
+
+#: src/err-codes.h:70
+msgid "Tribute to D. A."
+msgstr ""
+
+#: src/err-codes.h:71
+msgid "Weak encryption key"
+msgstr "弱加密密钥"
+
+#: src/err-codes.h:72
+msgid "Invalid key length"
+msgstr "无效的密钥长度"
+
+#: src/err-codes.h:73
+msgid "Invalid argument"
+msgstr "无效的参数"
+
+#: src/err-codes.h:74
+msgid "Syntax error in URI"
+msgstr "以下URI 中语法错误"
+
+#: src/err-codes.h:75
+msgid "Invalid URI"
+msgstr "无效的URI"
+
+#: src/err-codes.h:76
+msgid "Network error"
+msgstr "网络错误"
+
+#: src/err-codes.h:77
+msgid "Unknown host"
+msgstr "未知的主机"
+
+#: src/err-codes.h:78
+msgid "Selftest failed"
+msgstr "自测失败"
+
+#: src/err-codes.h:79
+msgid "Data not encrypted"
+msgstr "数据未加密"
+
+#: src/err-codes.h:80
+msgid "Data not processed"
+msgstr "数据未处理"
+
+#: src/err-codes.h:81
+msgid "Unusable public key"
+msgstr "不可用公钥"
+
+#: src/err-codes.h:82
+msgid "Unusable secret key"
+msgstr "不可用密钥"
+
+#: src/err-codes.h:83
+msgid "Invalid value"
+msgstr "无效值"
+
+#: src/err-codes.h:84
+msgid "Bad certificate chain"
+msgstr "损坏的证书链"
+
+#: src/err-codes.h:85
+msgid "Missing certificate"
+msgstr "缺失证书"
+
+#: src/err-codes.h:86
+msgid "No data"
+msgstr "无数据"
+
+#: src/err-codes.h:87
+msgid "Bug"
+msgstr "错误"
+
+#: src/err-codes.h:88
+msgid "Not supported"
+msgstr "不支持"
+
+#: src/err-codes.h:89
+msgid "Invalid operation code"
+msgstr "无效的操作码"
+
+#: src/err-codes.h:90
+msgid "Timeout"
+msgstr "超时"
+
+#: src/err-codes.h:91
+msgid "Internal error"
+msgstr "内部错误"
+
+#: src/err-codes.h:92
+msgid "EOF (gcrypt)"
+msgstr "EOF (gcrypt)"
+
+#: src/err-codes.h:93
+msgid "Invalid object"
+msgstr "无效的对象"
+
+#: src/err-codes.h:94
+msgid "Provided object is too short"
+msgstr "提供对象太短"
+
+#: src/err-codes.h:95
+msgid "Provided object is too large"
+msgstr "提供对象太大"
+
+#: src/err-codes.h:96
+msgid "Missing item in object"
+msgstr "对象中缺少项目"
+
+#: src/err-codes.h:97
+msgid "Not implemented"
+msgstr "未实现"
+
+#: src/err-codes.h:98
+msgid "Conflicting use"
+msgstr ""
+
+#: src/err-codes.h:99
+msgid "Invalid cipher mode"
+msgstr "无效的加密模式"
+
+#: src/err-codes.h:100
+msgid "Invalid flag"
+msgstr ""
+
+#: src/err-codes.h:101
+msgid "Invalid handle"
+msgstr ""
+
+#: src/err-codes.h:102
+msgid "Result truncated"
+msgstr "结果已截断"
+
+#: src/err-codes.h:103
+msgid "Incomplete line"
+msgstr "不完整行"
+
+#: src/err-codes.h:104
+msgid "Invalid response"
+msgstr "无效的响应"
+
+#: src/err-codes.h:105
+msgid "No agent running"
+msgstr "未运行代理"
+
+#: src/err-codes.h:106
+msgid "agent error"
+msgstr "代理错误"
+
+#: src/err-codes.h:107
+msgid "Invalid data"
+msgstr "无效的数据"
+
+#: src/err-codes.h:108
+msgid "Unspecific Assuan server fault"
+msgstr ""
+
+#: src/err-codes.h:109
+msgid "General Assuan error"
+msgstr "一般Assuan 错误"
+
+#: src/err-codes.h:110
+msgid "Invalid session key"
+msgstr "无效的会话密钥"
+
+#: src/err-codes.h:111
+msgid "Invalid S-expression"
+msgstr ""
+
+#: src/err-codes.h:112
+msgid "Unsupported algorithm"
+msgstr "不支持的算法"
+
+#: src/err-codes.h:113
+msgid "No pinentry"
+msgstr ""
+
+#: src/err-codes.h:114
+msgid "pinentry error"
+msgstr ""
+
+#: src/err-codes.h:115
+msgid "Bad PIN"
+msgstr "损坏的PIN"
+
+#: src/err-codes.h:116
+msgid "Invalid name"
+msgstr "无效的名称"
+
+#: src/err-codes.h:117
+msgid "Bad data"
+msgstr "不良数据"
+
+#: src/err-codes.h:118
+msgid "Invalid parameter"
+msgstr "无效的参数"
+
+#: src/err-codes.h:119
+msgid "Wrong card"
+msgstr "错卡"
+
+#: src/err-codes.h:120
+msgid "No dirmngr"
+msgstr ""
+
+#: src/err-codes.h:121
+msgid "dirmngr error"
+msgstr ""
+
+#: src/err-codes.h:122
+msgid "Certificate revoked"
+msgstr "证书已吊销"
+
+#: src/err-codes.h:123
+msgid "No CRL known"
+msgstr ""
+
+#: src/err-codes.h:124
+msgid "CRL too old"
+msgstr ""
+
+#: src/err-codes.h:125
+msgid "Line too long"
+msgstr "线太长"
+
+#: src/err-codes.h:126
+msgid "Not trusted"
+msgstr "不信任"
+
+#: src/err-codes.h:127
+msgid "Operation cancelled"
+msgstr "操作已取消"
+
+#: src/err-codes.h:128
+msgid "Bad CA certificate"
+msgstr "损坏的CA 证书"
+
+#: src/err-codes.h:129
+msgid "Certificate expired"
+msgstr "证书已过期"
+
+#: src/err-codes.h:130
+msgid "Certificate too young"
+msgstr "证书太新"
+
+#: src/err-codes.h:131
+msgid "Unsupported certificate"
+msgstr "不支持的凭证"
+
+#: src/err-codes.h:132
+msgid "Unknown S-expression"
+msgstr ""
+
+#: src/err-codes.h:133
+msgid "Unsupported protection"
+msgstr "不受支持的保护"
+
+#: src/err-codes.h:134
+msgid "Corrupted protection"
+msgstr "损坏的保护"
+
+#: src/err-codes.h:135
+msgid "Ambiguous name"
+msgstr ""
+
+#: src/err-codes.h:136
+msgid "Card error"
+msgstr "卡错误"
+
+#: src/err-codes.h:137
+msgid "Card reset required"
+msgstr "要求重置卡"
+
+#: src/err-codes.h:138
+msgid "Card removed"
+msgstr "卡已删除"
+
+#: src/err-codes.h:139
+msgid "Invalid card"
+msgstr "无效的卡"
+
+#: src/err-codes.h:140
+msgid "Card not present"
+msgstr ""
+
+#: src/err-codes.h:141
+msgid "No PKCS15 application"
+msgstr "没有PKCS15 应用程序"
+
+#: src/err-codes.h:142
+msgid "Not confirmed"
+msgstr "未确认"
+
+#: src/err-codes.h:143
+msgid "Configuration error"
+msgstr "配置错误"
+
+#: src/err-codes.h:144
+msgid "No policy match"
+msgstr "没有匹配的规则"
+
+#: src/err-codes.h:145
+msgid "Invalid index"
+msgstr "无效的索引"
+
+#: src/err-codes.h:146
+msgid "Invalid ID"
+msgstr "无效的 ID"
+
+#: src/err-codes.h:147
+msgid "No SmartCard daemon"
+msgstr "没有智能卡守护进程"
+
+#: src/err-codes.h:148
+msgid "SmartCard daemon error"
+msgstr "智能卡守护程序错误"
+
+#: src/err-codes.h:149
+msgid "Unsupported protocol"
+msgstr "不支持的协议"
+
+#: src/err-codes.h:150
+msgid "Bad PIN method"
+msgstr ""
+
+#: src/err-codes.h:151
+msgid "Card not initialized"
+msgstr "卡未初始化"
+
+#: src/err-codes.h:152
+msgid "Unsupported operation"
+msgstr "不支持的操作"
+
+#: src/err-codes.h:153
+msgid "Wrong key usage"
+msgstr "错误的密钥用法"
+
+#: src/err-codes.h:154
+msgid "Nothing found"
+msgstr "未发现"
+
+#: src/err-codes.h:155
+msgid "Wrong blob type"
+msgstr ""
+
+#: src/err-codes.h:156
+msgid "Missing value"
+msgstr "缺失值"
+
+#: src/err-codes.h:157
+msgid "Hardware problem"
+msgstr "硬件问题"
+
+#: src/err-codes.h:158
+msgid "PIN blocked"
+msgstr "PIN 已屏蔽"
+
+#: src/err-codes.h:159
+msgid "Conditions of use not satisfied"
+msgstr "使用条件不满足"
+
+#: src/err-codes.h:160
+msgid "PINs are not synced"
+msgstr "PINs 不同步"
+
+#: src/err-codes.h:161
+msgid "Invalid CRL"
+msgstr "无效的 CRL"
+
+#: src/err-codes.h:162
+msgid "BER error"
+msgstr "BER 错误"
+
+#: src/err-codes.h:163
+msgid "Invalid BER"
+msgstr "无效的BER"
+
+#: src/err-codes.h:164
+msgid "Element not found"
+msgstr "未找到元素"
+
+#: src/err-codes.h:165
+msgid "Identifier not found"
+msgstr "未找到标识符"
+
+#: src/err-codes.h:166
+msgid "Invalid tag"
+msgstr "无效的标签"
+
+#: src/err-codes.h:167
+msgid "Invalid length"
+msgstr "无效的长度"
+
+#: src/err-codes.h:168
+msgid "Invalid key info"
+msgstr "无效的密钥信息"
+
+#: src/err-codes.h:169
+msgid "Unexpected tag"
+msgstr ""
+
+#: src/err-codes.h:170
+msgid "Not DER encoded"
+msgstr ""
+
+#: src/err-codes.h:171
+msgid "No CMS object"
+msgstr "没有CMS 对象"
+
+#: src/err-codes.h:172
+msgid "Invalid CMS object"
+msgstr "无效的CMS 对象"
+
+#: src/err-codes.h:173
+msgid "Unknown CMS object"
+msgstr "未知的CMS 对象"
+
+#: src/err-codes.h:174
+msgid "Unsupported CMS object"
+msgstr "不支持的CMS 对象"
+
+#: src/err-codes.h:175
+msgid "Unsupported encoding"
+msgstr "不支持的编码"
+
+#: src/err-codes.h:176
+msgid "Unsupported CMS version"
+msgstr "不支持的CMS 版本"
+
+#: src/err-codes.h:177
+msgid "Unknown algorithm"
+msgstr "未知的算法"
+
+#: src/err-codes.h:178
+msgid "Invalid crypto engine"
+msgstr "无效的加密引擎"
+
+#: src/err-codes.h:179
+msgid "Public key not trusted"
+msgstr "公钥不被信任"
+
+#: src/err-codes.h:180
+msgid "Decryption failed"
+msgstr "解密失败"
+
+#: src/err-codes.h:181
+msgid "Key expired"
+msgstr "密钥已过期"
+
+#: src/err-codes.h:182
+msgid "Signature expired"
+msgstr "签名过期"
+
+#: src/err-codes.h:183
+msgid "Encoding problem"
+msgstr "编码问题"
+
+#: src/err-codes.h:184
+msgid "Invalid state"
+msgstr "无效的州"
+
+#: src/err-codes.h:185
+msgid "Duplicated value"
+msgstr "重复值"
+
+#: src/err-codes.h:186
+msgid "Missing action"
+msgstr ""
+
+#: src/err-codes.h:187
+msgid "ASN.1 module not found"
+msgstr "ASN.1 模块未找到"
+
+#: src/err-codes.h:188
+msgid "Invalid OID string"
+msgstr "无效的OID 字符串"
+
+#: src/err-codes.h:189
+msgid "Invalid time"
+msgstr "无效的时间"
+
+#: src/err-codes.h:190
+msgid "Invalid CRL object"
+msgstr "无效的CRL 对象"
+
+#: src/err-codes.h:191
+msgid "Unsupported CRL version"
+msgstr "不支持的CRL 版本"
+
+#: src/err-codes.h:192
+msgid "Invalid certificate object"
+msgstr "无效的证书对象"
+
+#: src/err-codes.h:193
+msgid "Unknown name"
+msgstr "未知名称"
+
+#: src/err-codes.h:194
+msgid "A locale function failed"
+msgstr "区域设置功能失败"
+
+#: src/err-codes.h:195
+msgid "Not locked"
+msgstr "未锁定"
+
+#: src/err-codes.h:196
+msgid "Protocol violation"
+msgstr "违反协议"
+
+#: src/err-codes.h:197
+msgid "Invalid MAC"
+msgstr "无效的MAC"
+
+#: src/err-codes.h:198
+msgid "Invalid request"
+msgstr "无效的请求"
+
+#: src/err-codes.h:199
+msgid "Unknown extension"
+msgstr "未知的扩展名"
+
+#: src/err-codes.h:200
+msgid "Unknown critical extension"
+msgstr ""
+
+#: src/err-codes.h:201
+msgid "Locked"
+msgstr "已锁定"
+
+#: src/err-codes.h:202
+msgid "Unknown option"
+msgstr "未知的选项"
+
+#: src/err-codes.h:203
+msgid "Unknown command"
+msgstr "未知命令"
+
+#: src/err-codes.h:204
+msgid "Not operational"
+msgstr ""
+
+#: src/err-codes.h:205
+msgid "No passphrase given"
+msgstr "没有给出密码"
+
+#: src/err-codes.h:206
+msgid "No PIN given"
+msgstr "没有给出PIN"
+
+#: src/err-codes.h:207
+#, fuzzy
+msgid "Not enabled"
+msgstr "未锁定"
+
+#: src/err-codes.h:208
+#, fuzzy
+msgid "No crypto engine"
+msgstr "无效的加密引擎"
+
+#: src/err-codes.h:209
+#, fuzzy
+msgid "Missing key"
+msgstr "缺失值"
+
+#: src/err-codes.h:210
+#, fuzzy
+msgid "Too many objects"
+msgstr "没有CMS 对象"
+
+#: src/err-codes.h:211
+msgid "Limit reached"
+msgstr ""
+
+#: src/err-codes.h:212
+#, fuzzy
+msgid "Not initialized"
+msgstr "卡未初始化"
+
+#: src/err-codes.h:213
+#, fuzzy
+msgid "Missing issuer certificate"
+msgstr "缺失证书"
+
+#: src/err-codes.h:214
+#, fuzzy
+msgid "Operation fully cancelled"
+msgstr "操作已取消"
+
+#: src/err-codes.h:215
+msgid "Operation not yet finished"
+msgstr "操作尚未完成"
+
+#: src/err-codes.h:216
+msgid "Buffer too short"
+msgstr "缓冲区太短"
+
+#: src/err-codes.h:217
+msgid "Invalid length specifier in S-expression"
+msgstr ""
+
+#: src/err-codes.h:218
+msgid "String too long in S-expression"
+msgstr ""
+
+#: src/err-codes.h:219
+msgid "Unmatched parentheses in S-expression"
+msgstr ""
+
+#: src/err-codes.h:220
+msgid "S-expression not canonical"
+msgstr ""
+
+#: src/err-codes.h:221
+msgid "Bad character in S-expression"
+msgstr ""
+
+#: src/err-codes.h:222
+msgid "Bad quotation in S-expression"
+msgstr ""
+
+#: src/err-codes.h:223
+msgid "Zero prefix in S-expression"
+msgstr ""
+
+#: src/err-codes.h:224
+msgid "Nested display hints in S-expression"
+msgstr ""
+
+#: src/err-codes.h:225
+msgid "Unmatched display hints"
+msgstr ""
+
+#: src/err-codes.h:226
+msgid "Unexpected reserved punctuation in S-expression"
+msgstr ""
+
+#: src/err-codes.h:227
+msgid "Bad hexadecimal character in S-expression"
+msgstr ""
+
+#: src/err-codes.h:228
+msgid "Odd hexadecimal numbers in S-expression"
+msgstr ""
+
+#: src/err-codes.h:229
+msgid "Bad octal character in S-expression"
+msgstr ""
+
+#: src/err-codes.h:230
+msgid "General IPC error"
+msgstr "一般IPC 错误"
+
+#: src/err-codes.h:231
+msgid "IPC accept call failed"
+msgstr ""
+
+#: src/err-codes.h:232
+msgid "IPC connect call failed"
+msgstr ""
+
+#: src/err-codes.h:233
+msgid "Invalid IPC response"
+msgstr ""
+
+#: src/err-codes.h:234
+msgid "Invalid value passed to IPC"
+msgstr ""
+
+#: src/err-codes.h:235
+msgid "Incomplete line passed to IPC"
+msgstr ""
+
+#: src/err-codes.h:236
+msgid "Line passed to IPC too long"
+msgstr ""
+
+#: src/err-codes.h:237
+msgid "Nested IPC commands"
+msgstr ""
+
+#: src/err-codes.h:238
+msgid "No data callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:239
+msgid "No inquire callback in IPC"
+msgstr ""
+
+#: src/err-codes.h:240
+msgid "Not an IPC server"
+msgstr "不是IPC 服务器"
+
+#: src/err-codes.h:241
+msgid "Not an IPC client"
+msgstr "不是IPC 客户端"
+
+#: src/err-codes.h:242
+msgid "Problem starting IPC server"
+msgstr ""
+
+#: src/err-codes.h:243
+msgid "IPC read error"
+msgstr "IPC 读取错误"
+
+#: src/err-codes.h:244
+msgid "IPC write error"
+msgstr "IPC写入 错误"
+
+#: src/err-codes.h:245
+msgid "Too much data for IPC layer"
+msgstr ""
+
+#: src/err-codes.h:246
+msgid "Unexpected IPC command"
+msgstr ""
+
+#: src/err-codes.h:247
+msgid "Unknown IPC command"
+msgstr "未知IPC 命令"
+
+#: src/err-codes.h:248
+msgid "IPC syntax error"
+msgstr "IPC 语法错误"
+
+#: src/err-codes.h:249
+msgid "IPC call has been cancelled"
+msgstr ""
+
+#: src/err-codes.h:250
+msgid "No input source for IPC"
+msgstr ""
+
+#: src/err-codes.h:251
+msgid "No output source for IPC"
+msgstr ""
+
+#: src/err-codes.h:252
+msgid "IPC parameter error"
+msgstr "IPC 参数错误"
+
+#: src/err-codes.h:253
+msgid "Unknown IPC inquire"
+msgstr ""
+
+#: src/err-codes.h:254
+msgid "User defined error code 1"
+msgstr "用户定义的错误代码1"
+
+#: src/err-codes.h:255
+msgid "User defined error code 2"
+msgstr "用户定义的错误代码2"
+
+#: src/err-codes.h:256
+msgid "User defined error code 3"
+msgstr "用户定义的错误代码3"
+
+#: src/err-codes.h:257
+msgid "User defined error code 4"
+msgstr "用户定义的错误代码4"
+
+#: src/err-codes.h:258
+msgid "User defined error code 5"
+msgstr "用户定义的错误代码5"
+
+#: src/err-codes.h:259
+msgid "User defined error code 6"
+msgstr "用户定义的错误代码6"
+
+#: src/err-codes.h:260
+msgid "User defined error code 7"
+msgstr "用户定义的错误代码7"
+
+#: src/err-codes.h:261
+msgid "User defined error code 8"
+msgstr "用户定义的错误代码8"
+
+#: src/err-codes.h:262
+msgid "User defined error code 9"
+msgstr "用户定义的错误码9"
+
+#: src/err-codes.h:263
+msgid "User defined error code 10"
+msgstr "用户定义的错误代码10"
+
+#: src/err-codes.h:264
+msgid "User defined error code 11"
+msgstr "用户定义的错误代码11"
+
+#: src/err-codes.h:265
+msgid "User defined error code 12"
+msgstr "用户定义的错误代码12"
+
+#: src/err-codes.h:266
+msgid "User defined error code 13"
+msgstr "用户定义的错误代码13"
+
+#: src/err-codes.h:267
+msgid "User defined error code 14"
+msgstr "用户定义的错误代码14"
+
+#: src/err-codes.h:268
+msgid "User defined error code 15"
+msgstr "用户定义的错误代码15"
+
+#: src/err-codes.h:269
+msgid "User defined error code 16"
+msgstr "用户定义的错误代码16"
+
+#: src/err-codes.h:270
+msgid "System error w/o errno"
+msgstr ""
+
+#: src/err-codes.h:271
+msgid "Unknown system error"
+msgstr "未知的系统错误"
+
+#: src/err-codes.h:272
+msgid "End of file"
+msgstr "文件结尾"
+
+#: src/err-codes.h:273
+msgid "Unknown error code"
+msgstr "未知的错误代码"
+
+#: src/gpg-error.c:392
+#, c-format
+msgid "Usage: %s GPG-ERROR [...]\n"
+msgstr ""
+
+#: src/gpg-error.c:448
+#, c-format
+msgid "%s: warning: could not recognize %s\n"
+msgstr "%s：警告：无法识别 %s\n"
diff --git a/libgpg-error-1.10/potomo b/libgpg-error-1.10/potomo
new file mode 100755
index 0000000..2061728
--- /dev/null
+++ b/libgpg-error-1.10/potomo
@@ -0,0 +1,64 @@
+#!/bin/sh
+# potomo - Convert a .po file to an utf-8 encoded .mo file.
+# Copyright 2008 g10 Code GmbH
+# Copyright 2010 Free Software Foundation, Inc.
+#
+# This file is free software; as a special exception the author gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# This file is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This script is used to create the mo files for applications using
+# the simple gettext implementation provided by libgpg-error. That
+# gettext can only cope with utf-8 encoded mo files; thus we make this
+# sure while creating the mo. A conversion is not done if the source
+# file does not exist or if it is not newer than the mo file.
+
+if [ "$1" = "--get-linguas" -a $# -eq 2 ]; then
+ if [ ! -f "$2/LINGUAS" ]; then
+ echo "potomo: directory '$2' has no LINGUAS file" >&2
+ exit 1
+ fi
+ echo $(sed -e "/^#/d" -e "s/#.*//" "$2"/LINGUAS)
+ exit 0
+fi
+
+if [ $# -ne 2 ]; then
+ echo "usage: potomo INFILE.PO OUTFILE.MO" >&2
+ echo " potomo --get-linguas DIR" >&2
+ exit 1
+fi
+infile="$1"
+outfile="$2"
+
+if [ ! -f "$infile" ]; then
+ echo "potomo: '$infile' not found - ignored" 2>&1
+ exit 0
+fi
+
+if [ "$outfile" -nt "$infile" ]; then
+ echo "potomo: '$outfile' is newer than source - keeping" 2>&1
+ exit 0
+fi
+
+# Note that we could use the newer msgconv. However this tool was not
+# widely available back in 2008.
+
+fromset=`sed -n '/^"Content-Type:/ s/.*charset=\([a-zA-Z0-9_-]*\).*/\1/p' \
+ "$infile"`
+
+case "$fromset" in
+ utf8|utf-8|UTF8|UTF-8)
+ echo "potomo: '$infile' keeping $fromset" >&2
+ msgfmt --output-file="$outfile" "$infile"
+ ;;
+ *)
+ echo "potomo: '$infile' converting from $fromset to utf-8" >&2
+ iconv --silent --from-code=$fromset --to-code=utf-8 < "$infile" |\
+ sed "/^\"Content-Type:/ s/charset=[a-zA-Z0-9_-]*/charset=utf-8/"|\
+ msgfmt --output-file="$outfile" -
+ ;;
+esac
diff --git a/libgpg-error-1.10/src/Makefile.am b/libgpg-error-1.10/src/Makefile.am
new file mode 100644
index 0000000..518a4c0
--- /dev/null
+++ b/libgpg-error-1.10/src/Makefile.am
@@ -0,0 +1,215 @@
+# Makefile.am for libgpg-error.
+# Copyright (C) 2003, 2004 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+# We distribute the generated sources err-sources.h and err-codes.h,
+# because they are needed to build the po directory, and they don't
+# depend on the configuration anyway.
+
+
+if HAVE_W32CE_SYSTEM
+gpg_extra_headers = gpg-extra/errno.h
+extra_cppflags = -idirafter gpg-extra
+else
+gpg_extra_headers =
+extra_cppflags =
+endif
+
+localedir = $(datadir)/locale
+bin_PROGRAMS = gpg-error
+lib_LTLIBRARIES = libgpg-error.la
+include_HEADERS = gpg-error.h
+bin_SCRIPTS = gpg-error-config
+m4datadir = $(datadir)/aclocal
+m4data_DATA = gpg-error.m4
+
+EXTRA_DIST = mkstrtable.awk err-sources.h.in err-codes.h.in \
+ mkerrnos.awk errnos.in README \
+ mkerrcodes.awk mkerrcodes1.awk mkerrcodes2.awk mkerrcodes.c \
+ mkheader.awk gpg-error.h.in mkw32errmap.c w32-add.h w32ce-add.h \
+ err-sources.h err-codes.h gpg-error-config.in gpg-error.m4 \
+ gpg-error.def.in versioninfo.rc.in
+
+BUILT_SOURCES = err-sources.h err-codes.h code-to-errno.h code-from-errno.h \
+ err-sources-sym.h err-codes-sym.h errnos-sym.h gpg-error.h \
+ gpg-error.def extra-h.in mkw32errmap.map.c
+
+tmp_files = _mkerrcodes.h _gpg-error.def.h mkw32errmap.tab.h mkw32errmap.map.c
+
+CLEANFILES = err-sources.h err-codes.h code-to-errno.h code-from-errno.h \
+ gpg-error.h mkerrcodes mkerrcodes.h gpg-error.def mkw32errmap.tab.h \
+ mkw32errmap.map.c err-sources-sym.h err-codes-sym.h errnos-sym.h \
+ gpg-extra/errno.h extra-h.in $(tmp_files)
+
+if HAVE_W32_SYSTEM
+arch_sources = w32-gettext.c
+
+RCCOMPILE = $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ -DLOCALEDIR=\"$(localedir)\" $(AM_CPPFLAGS) $(CPPFLAGS)
+LTRCCOMPILE = $(LIBTOOL) --mode=compile --tag=RC $(RCCOMPILE)
+
+SUFFIXES = .rc .lo
+
+.rc.lo:
+ $(LTRCCOMPILE) -i "$<" -o "$@"
+
+gpg_error_res = versioninfo.lo
+no_undefined = -no-undefined
+export_symbols = -export-symbols gpg-error.def
+
+install-def-file: gpg-error.def
+ $(INSTALL) gpg-error.def $(DESTDIR)$(libdir)/gpg-error.def
+
+uninstall-def-file:
+ -rm $(DESTDIR)$(libdir)/gpg-error.def
+
+libgpg_error_la_DEPENDENCIES = $(gpg_error_res) gpg-error.def
+intllibs =
+
+else
+arch_sources =
+gpg_error_res =
+no_undefined =
+export_symbols =
+install-def-file:
+uninstall-def-file:
+
+intllibs = @LTLIBINTL@
+
+endif
+
+
+libgpg_error_la_LDFLAGS = -version-info \
+ @LIBGPG_ERROR_LT_CURRENT@:@LIBGPG_ERROR_LT_REVISION@:@LIBGPG_ERROR_LT_AGE@ \
+ $(no_undefined) $(export_symbols)
+
+libgpg_error_la_SOURCES = gpg-error.h gettext.h $(arch_sources) \
+ init.c init.h strsource.c strerror.c code-to-errno.c code-from-errno.c
+
+# Note that RCCOMPILE needs the same defines as ..._la_CPPFLAGS but
+# without the extra_cppflags because they may include am -idirafter
+# which is not supported by the RC compiler.
+libgpg_error_la_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" $(extra_cppflags)
+libgpg_error_la_LIBADD = $(gpg_error_res) $(intllibs)
+
+gpg_error_SOURCES = strsource-sym.c strerror-sym.c gpg-error.c
+gpg_error_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" $(extra_cppflags)
+gpg_error_LDADD = ./libgpg-error.la @LTLIBINTL@
+
+# We build err-sources.h and err-codes.h in the source directory.
+# This is needed because gettext does only look into the source
+# directory to find the files listed in po/POTFILE.in. To make these
+# rules work we also need to depend on Makefile.am and not on the
+# generated files Makefile.in or Makefile.
+$(srcdir)/err-sources.h: Makefile.am mkstrtable.awk err-sources.h.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=3 \
+ $(srcdir)/err-sources.h.in >$@
+
+err-sources-sym.h: Makefile mkstrtable.awk err-sources.h.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=2 -v nogettext=1 \
+ $(srcdir)/err-sources.h.in >$@
+
+$(srcdir)/err-codes.h: Makefile.am mkstrtable.awk err-codes.h.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=3 \
+ $(srcdir)/err-codes.h.in >$@
+
+err-codes-sym.h: Makefile mkstrtable.awk err-codes.h.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=2 -v nogettext=1 \
+ $(srcdir)/err-codes.h.in >$@
+
+code-to-errno.h: Makefile mkerrnos.awk errnos.in
+ $(AWK) -f $(srcdir)/mkerrnos.awk $(srcdir)/errnos.in >$@
+
+# It is correct to use $(CPP). We want the host's idea of the error codes.
+mkerrcodes.h: Makefile mkerrcodes.awk $(gpg_extra_headers)
+ $(AWK) -f $(srcdir)/mkerrcodes1.awk $(srcdir)/errnos.in >_$@
+ $(CPP) $(extra_cppflags) _$@ | grep GPG_ERR_ | \
+ $(AWK) -f $(srcdir)/mkerrcodes.awk >$@
+ -rm _$@
+
+if HAVE_W32CE_SYSTEM
+# It is correct to use $(CPP). We want the host's idea of the error codes.
+mkw32errmap.tab.h: Makefile mkw32errmap.c
+ $(CPP) -DRESOLVE_MACROS $(srcdir)/mkw32errmap.c | \
+ grep '{&mkw32errmap_marker' >$@
+mkw32errmap.map.c: mkw32errmap
+ ./mkw32errmap --map > $@
+gpg-extra/errno.h: mkw32errmap
+ -$(MKDIR_P) gpg-extra
+ ./mkw32errmap > $@
+else
+mkw32errmap.map.c:
+ echo "/*dummy*/" > $@
+endif
+
+# We use CC proper for preprocessing thus we have to convince it that
+# the data is really to be preprocessed.
+gpg-error.def: Makefile gpg-error.def.in
+ cat $(srcdir)/gpg-error.def.in >_$@.h
+ $(CPP) $(DEFAULT_INCLUDES) $(INCLUDES) $(extra_cppflags) _$@.h | \
+ grep -v '^#' >$@
+ -rm _$@.h
+
+# It is correct to use $(CC_FOR_BUILD) here. We want to run the
+# program at build time.
+mkerrcodes: mkerrcodes.c mkerrcodes.h Makefile
+ $(CC_FOR_BUILD) -I. -I$(srcdir) -o $@ $(srcdir)/mkerrcodes.c
+
+if HAVE_W32CE_SYSTEM
+# It is correct to use $(CC_FOR_BUILD) here. We want to run the
+# program at build time.
+mkw32errmap: mkw32errmap.c mkw32errmap.tab.h Makefile
+ $(CC_FOR_BUILD) -I. -I$(srcdir) -o $@ $(srcdir)/mkw32errmap.c
+endif
+
+code-from-errno.h: mkerrcodes Makefile
+ ./mkerrcodes | $(AWK) -f $(srcdir)/mkerrcodes2.awk >$@
+
+errnos-sym.h: Makefile mkstrtable.awk errnos.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=2 -v nogettext=1 \
+ -v prefix=GPG_ERR_ -v namespace=errnos_ \
+ $(srcdir)/errnos.in >$@
+
+extra-h.in: Makefile w32-add.h w32ce-add.h
+ -rm extra-h.in
+if HAVE_W32_SYSTEM
+ cat $(srcdir)/w32-add.h >>extra-h.in
+endif
+if HAVE_W32CE_SYSTEM
+ cat $(srcdir)/w32ce-add.h >>extra-h.in
+endif
+ echo EOF >>extra-h.in
+
+gpg-error.h: Makefile mkheader.awk err-sources.h.in err-codes.h.in \
+ errnos.in extra-h.in gpg-error.h.in
+ $(AWK) -f $(srcdir)/mkheader.awk \
+ $(srcdir)/err-sources.h.in \
+ $(srcdir)/err-codes.h.in \
+ $(srcdir)/errnos.in \
+ extra-h.in \
+ $(srcdir)/gpg-error.h.in > $@
+
+
+install-data-local:
+if HAVE_W32CE_SYSTEM
+ -$(MKDIR_P) "$(DESTDIR)$(includedir)/gpg-extra"
+ $(INSTALL_DATA) gpg-extra/errno.h \
+ "$(DESTDIR)$(includedir)/gpg-extra/errno.h"
+else
+ :
+endif
diff --git a/libgpg-error-1.10/src/Makefile.in b/libgpg-error-1.10/src/Makefile.in
new file mode 100644
index 0000000..c7fe92c
--- /dev/null
+++ b/libgpg-error-1.10/src/Makefile.in
@@ -0,0 +1,915 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am for libgpg-error.
+# Copyright (C) 2003, 2004 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+# We distribute the generated sources err-sources.h and err-codes.h,
+# because they are needed to build the po directory, and they don't
+# depend on the configuration anyway.
+
+
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = gpg-error$(EXEEXT)
+@HAVE_W32_SYSTEM_FALSE@libgpg_error_la_DEPENDENCIES = \
+@HAVE_W32_SYSTEM_FALSE@ $(am__DEPENDENCIES_1) \
+@HAVE_W32_SYSTEM_FALSE@ $(am__DEPENDENCIES_2)
+subdir = src
+DIST_COMMON = README $(include_HEADERS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(srcdir)/gpg-error-config.in \
+ $(srcdir)/versioninfo.rc.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
+ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
+ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES = gpg-error-config versioninfo.rc
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+ "$(DESTDIR)$(bindir)" "$(DESTDIR)$(m4datadir)" \
+ "$(DESTDIR)$(includedir)"
+libLTLIBRARIES_INSTALL = $(INSTALL)
+LTLIBRARIES = $(lib_LTLIBRARIES)
+@HAVE_W32_SYSTEM_TRUE@am__DEPENDENCIES_1 = versioninfo.lo
+am__DEPENDENCIES_2 =
+am__libgpg_error_la_SOURCES_DIST = gpg-error.h gettext.h w32-gettext.c \
+ init.c init.h strsource.c strerror.c code-to-errno.c \
+ code-from-errno.c
+@HAVE_W32_SYSTEM_TRUE@am__objects_1 = libgpg_error_la-w32-gettext.lo
+am_libgpg_error_la_OBJECTS = $(am__objects_1) libgpg_error_la-init.lo \
+ libgpg_error_la-strsource.lo libgpg_error_la-strerror.lo \
+ libgpg_error_la-code-to-errno.lo \
+ libgpg_error_la-code-from-errno.lo
+libgpg_error_la_OBJECTS = $(am_libgpg_error_la_OBJECTS)
+libgpg_error_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(libgpg_error_la_LDFLAGS) $(LDFLAGS) -o $@
+binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
+PROGRAMS = $(bin_PROGRAMS)
+am_gpg_error_OBJECTS = gpg_error-strsource-sym.$(OBJEXT) \
+ gpg_error-strerror-sym.$(OBJEXT) gpg_error-gpg-error.$(OBJEXT)
+gpg_error_OBJECTS = $(am_gpg_error_OBJECTS)
+gpg_error_DEPENDENCIES = ./libgpg-error.la
+binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
+SCRIPTS = $(bin_SCRIPTS)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(libgpg_error_la_SOURCES) $(gpg_error_SOURCES)
+DIST_SOURCES = $(am__libgpg_error_la_SOURCES_DIST) \
+ $(gpg_error_SOURCES)
+m4dataDATA_INSTALL = $(INSTALL_DATA)
+DATA = $(m4data_DATA)
+includeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_FILEVERSION = @BUILD_FILEVERSION@
+BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GPG_ERROR_CONFIG_CFLAGS = @GPG_ERROR_CONFIG_CFLAGS@
+GPG_ERROR_CONFIG_ISUBDIRAFTER = @GPG_ERROR_CONFIG_ISUBDIRAFTER@
+GPG_ERROR_CONFIG_LIBS = @GPG_ERROR_CONFIG_LIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBGPG_ERROR_LT_AGE = @LIBGPG_ERROR_LT_AGE@
+LIBGPG_ERROR_LT_CURRENT = @LIBGPG_ERROR_LT_CURRENT@
+LIBGPG_ERROR_LT_REVISION = @LIBGPG_ERROR_LT_REVISION@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = $(datadir)/locale
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+@HAVE_W32CE_SYSTEM_FALSE@gpg_extra_headers =
+@HAVE_W32CE_SYSTEM_TRUE@gpg_extra_headers = gpg-extra/errno.h
+@HAVE_W32CE_SYSTEM_FALSE@extra_cppflags =
+@HAVE_W32CE_SYSTEM_TRUE@extra_cppflags = -idirafter gpg-extra
+lib_LTLIBRARIES = libgpg-error.la
+include_HEADERS = gpg-error.h
+bin_SCRIPTS = gpg-error-config
+m4datadir = $(datadir)/aclocal
+m4data_DATA = gpg-error.m4
+EXTRA_DIST = mkstrtable.awk err-sources.h.in err-codes.h.in \
+ mkerrnos.awk errnos.in README \
+ mkerrcodes.awk mkerrcodes1.awk mkerrcodes2.awk mkerrcodes.c \
+ mkheader.awk gpg-error.h.in mkw32errmap.c w32-add.h w32ce-add.h \
+ err-sources.h err-codes.h gpg-error-config.in gpg-error.m4 \
+ gpg-error.def.in versioninfo.rc.in
+
+BUILT_SOURCES = err-sources.h err-codes.h code-to-errno.h code-from-errno.h \
+ err-sources-sym.h err-codes-sym.h errnos-sym.h gpg-error.h \
+ gpg-error.def extra-h.in mkw32errmap.map.c
+
+tmp_files = _mkerrcodes.h _gpg-error.def.h mkw32errmap.tab.h mkw32errmap.map.c
+CLEANFILES = err-sources.h err-codes.h code-to-errno.h code-from-errno.h \
+ gpg-error.h mkerrcodes mkerrcodes.h gpg-error.def mkw32errmap.tab.h \
+ mkw32errmap.map.c err-sources-sym.h err-codes-sym.h errnos-sym.h \
+ gpg-extra/errno.h extra-h.in $(tmp_files)
+
+@HAVE_W32_SYSTEM_FALSE@arch_sources =
+@HAVE_W32_SYSTEM_TRUE@arch_sources = w32-gettext.c
+@HAVE_W32_SYSTEM_TRUE@RCCOMPILE = $(RC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+@HAVE_W32_SYSTEM_TRUE@ -DLOCALEDIR=\"$(localedir)\" $(AM_CPPFLAGS) $(CPPFLAGS)
+
+@HAVE_W32_SYSTEM_TRUE@LTRCCOMPILE = $(LIBTOOL) --mode=compile --tag=RC $(RCCOMPILE)
+@HAVE_W32_SYSTEM_TRUE@SUFFIXES = .rc .lo
+@HAVE_W32_SYSTEM_FALSE@gpg_error_res =
+@HAVE_W32_SYSTEM_TRUE@gpg_error_res = versioninfo.lo
+@HAVE_W32_SYSTEM_FALSE@no_undefined =
+@HAVE_W32_SYSTEM_TRUE@no_undefined = -no-undefined
+@HAVE_W32_SYSTEM_FALSE@export_symbols =
+@HAVE_W32_SYSTEM_TRUE@export_symbols = -export-symbols gpg-error.def
+@HAVE_W32_SYSTEM_TRUE@libgpg_error_la_DEPENDENCIES = $(gpg_error_res) gpg-error.def
+@HAVE_W32_SYSTEM_FALSE@intllibs = @LTLIBINTL@
+@HAVE_W32_SYSTEM_TRUE@intllibs =
+libgpg_error_la_LDFLAGS = -version-info \
+ @LIBGPG_ERROR_LT_CURRENT@:@LIBGPG_ERROR_LT_REVISION@:@LIBGPG_ERROR_LT_AGE@ \
+ $(no_undefined) $(export_symbols)
+
+libgpg_error_la_SOURCES = gpg-error.h gettext.h $(arch_sources) \
+ init.c init.h strsource.c strerror.c code-to-errno.c code-from-errno.c
+
+
+# Note that RCCOMPILE needs the same defines as ..._la_CPPFLAGS but
+# without the extra_cppflags because they may include am -idirafter
+# which is not supported by the RC compiler.
+libgpg_error_la_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" $(extra_cppflags)
+libgpg_error_la_LIBADD = $(gpg_error_res) $(intllibs)
+gpg_error_SOURCES = strsource-sym.c strerror-sym.c gpg-error.c
+gpg_error_CPPFLAGS = -DLOCALEDIR=\"$(localedir)\" $(extra_cppflags)
+gpg_error_LDADD = ./libgpg-error.la @LTLIBINTL@
+all: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .rc .lo .c .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+gpg-error-config: $(top_builddir)/config.status $(srcdir)/gpg-error-config.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+versioninfo.rc: $(top_builddir)/config.status $(srcdir)/versioninfo.rc.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ if test -f $$p; then \
+ f=$(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+ else :; fi; \
+ done
+
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ p=$(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+ done
+
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+ test "$$dir" != "$$p" || dir=.; \
+ echo "rm -f \"$${dir}/so_locations\""; \
+ rm -f "$${dir}/so_locations"; \
+ done
+libgpg-error.la: $(libgpg_error_la_OBJECTS) $(libgpg_error_la_DEPENDENCIES)
+ $(libgpg_error_la_LINK) -rpath $(libdir) $(libgpg_error_la_OBJECTS) $(libgpg_error_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ if test -f $$p \
+ || test -f $$p1 \
+ ; then \
+ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
+ else :; fi; \
+ done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+ rm -f "$(DESTDIR)$(bindir)/$$f"; \
+ done
+
+clean-binPROGRAMS:
+ @list='$(bin_PROGRAMS)'; for p in $$list; do \
+ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f $$p $$f"; \
+ rm -f $$p $$f ; \
+ done
+gpg-error$(EXEEXT): $(gpg_error_OBJECTS) $(gpg_error_DEPENDENCIES)
+ @rm -f gpg-error$(EXEEXT)
+ $(LINK) $(gpg_error_OBJECTS) $(gpg_error_LDADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+ @$(NORMAL_INSTALL)
+ test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+ @list='$(bin_SCRIPTS)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f $$d$$p; then \
+ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+ echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
+ $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
+ else :; fi; \
+ done
+
+uninstall-binSCRIPTS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_SCRIPTS)'; for p in $$list; do \
+ f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+ echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
+ rm -f "$(DESTDIR)$(bindir)/$$f"; \
+ done
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpg_error-gpg-error.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpg_error-strerror-sym.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpg_error-strsource-sym.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgpg_error_la-code-from-errno.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgpg_error_la-code-to-errno.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgpg_error_la-init.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgpg_error_la-strerror.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgpg_error_la-strsource.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/libgpg_error_la-w32-gettext.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+libgpg_error_la-w32-gettext.lo: w32-gettext.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libgpg_error_la-w32-gettext.lo -MD -MP -MF $(DEPDIR)/libgpg_error_la-w32-gettext.Tpo -c -o libgpg_error_la-w32-gettext.lo `test -f 'w32-gettext.c' || echo '$(srcdir)/'`w32-gettext.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libgpg_error_la-w32-gettext.Tpo $(DEPDIR)/libgpg_error_la-w32-gettext.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='w32-gettext.c' object='libgpg_error_la-w32-gettext.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libgpg_error_la-w32-gettext.lo `test -f 'w32-gettext.c' || echo '$(srcdir)/'`w32-gettext.c
+
+libgpg_error_la-init.lo: init.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libgpg_error_la-init.lo -MD -MP -MF $(DEPDIR)/libgpg_error_la-init.Tpo -c -o libgpg_error_la-init.lo `test -f 'init.c' || echo '$(srcdir)/'`init.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libgpg_error_la-init.Tpo $(DEPDIR)/libgpg_error_la-init.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='init.c' object='libgpg_error_la-init.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libgpg_error_la-init.lo `test -f 'init.c' || echo '$(srcdir)/'`init.c
+
+libgpg_error_la-strsource.lo: strsource.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libgpg_error_la-strsource.lo -MD -MP -MF $(DEPDIR)/libgpg_error_la-strsource.Tpo -c -o libgpg_error_la-strsource.lo `test -f 'strsource.c' || echo '$(srcdir)/'`strsource.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libgpg_error_la-strsource.Tpo $(DEPDIR)/libgpg_error_la-strsource.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='strsource.c' object='libgpg_error_la-strsource.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libgpg_error_la-strsource.lo `test -f 'strsource.c' || echo '$(srcdir)/'`strsource.c
+
+libgpg_error_la-strerror.lo: strerror.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libgpg_error_la-strerror.lo -MD -MP -MF $(DEPDIR)/libgpg_error_la-strerror.Tpo -c -o libgpg_error_la-strerror.lo `test -f 'strerror.c' || echo '$(srcdir)/'`strerror.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libgpg_error_la-strerror.Tpo $(DEPDIR)/libgpg_error_la-strerror.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='strerror.c' object='libgpg_error_la-strerror.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libgpg_error_la-strerror.lo `test -f 'strerror.c' || echo '$(srcdir)/'`strerror.c
+
+libgpg_error_la-code-to-errno.lo: code-to-errno.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libgpg_error_la-code-to-errno.lo -MD -MP -MF $(DEPDIR)/libgpg_error_la-code-to-errno.Tpo -c -o libgpg_error_la-code-to-errno.lo `test -f 'code-to-errno.c' || echo '$(srcdir)/'`code-to-errno.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libgpg_error_la-code-to-errno.Tpo $(DEPDIR)/libgpg_error_la-code-to-errno.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='code-to-errno.c' object='libgpg_error_la-code-to-errno.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libgpg_error_la-code-to-errno.lo `test -f 'code-to-errno.c' || echo '$(srcdir)/'`code-to-errno.c
+
+libgpg_error_la-code-from-errno.lo: code-from-errno.c
+@am__fastdepCC_TRUE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT libgpg_error_la-code-from-errno.lo -MD -MP -MF $(DEPDIR)/libgpg_error_la-code-from-errno.Tpo -c -o libgpg_error_la-code-from-errno.lo `test -f 'code-from-errno.c' || echo '$(srcdir)/'`code-from-errno.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/libgpg_error_la-code-from-errno.Tpo $(DEPDIR)/libgpg_error_la-code-from-errno.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='code-from-errno.c' object='libgpg_error_la-code-from-errno.lo' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(libgpg_error_la_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o libgpg_error_la-code-from-errno.lo `test -f 'code-from-errno.c' || echo '$(srcdir)/'`code-from-errno.c
+
+gpg_error-strsource-sym.o: strsource-sym.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpg_error-strsource-sym.o -MD -MP -MF $(DEPDIR)/gpg_error-strsource-sym.Tpo -c -o gpg_error-strsource-sym.o `test -f 'strsource-sym.c' || echo '$(srcdir)/'`strsource-sym.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gpg_error-strsource-sym.Tpo $(DEPDIR)/gpg_error-strsource-sym.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='strsource-sym.c' object='gpg_error-strsource-sym.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpg_error-strsource-sym.o `test -f 'strsource-sym.c' || echo '$(srcdir)/'`strsource-sym.c
+
+gpg_error-strsource-sym.obj: strsource-sym.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpg_error-strsource-sym.obj -MD -MP -MF $(DEPDIR)/gpg_error-strsource-sym.Tpo -c -o gpg_error-strsource-sym.obj `if test -f 'strsource-sym.c'; then $(CYGPATH_W) 'strsource-sym.c'; else $(CYGPATH_W) '$(srcdir)/strsource-sym.c'; fi`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gpg_error-strsource-sym.Tpo $(DEPDIR)/gpg_error-strsource-sym.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='strsource-sym.c' object='gpg_error-strsource-sym.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpg_error-strsource-sym.obj `if test -f 'strsource-sym.c'; then $(CYGPATH_W) 'strsource-sym.c'; else $(CYGPATH_W) '$(srcdir)/strsource-sym.c'; fi`
+
+gpg_error-strerror-sym.o: strerror-sym.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpg_error-strerror-sym.o -MD -MP -MF $(DEPDIR)/gpg_error-strerror-sym.Tpo -c -o gpg_error-strerror-sym.o `test -f 'strerror-sym.c' || echo '$(srcdir)/'`strerror-sym.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gpg_error-strerror-sym.Tpo $(DEPDIR)/gpg_error-strerror-sym.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='strerror-sym.c' object='gpg_error-strerror-sym.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpg_error-strerror-sym.o `test -f 'strerror-sym.c' || echo '$(srcdir)/'`strerror-sym.c
+
+gpg_error-strerror-sym.obj: strerror-sym.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpg_error-strerror-sym.obj -MD -MP -MF $(DEPDIR)/gpg_error-strerror-sym.Tpo -c -o gpg_error-strerror-sym.obj `if test -f 'strerror-sym.c'; then $(CYGPATH_W) 'strerror-sym.c'; else $(CYGPATH_W) '$(srcdir)/strerror-sym.c'; fi`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gpg_error-strerror-sym.Tpo $(DEPDIR)/gpg_error-strerror-sym.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='strerror-sym.c' object='gpg_error-strerror-sym.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpg_error-strerror-sym.obj `if test -f 'strerror-sym.c'; then $(CYGPATH_W) 'strerror-sym.c'; else $(CYGPATH_W) '$(srcdir)/strerror-sym.c'; fi`
+
+gpg_error-gpg-error.o: gpg-error.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpg_error-gpg-error.o -MD -MP -MF $(DEPDIR)/gpg_error-gpg-error.Tpo -c -o gpg_error-gpg-error.o `test -f 'gpg-error.c' || echo '$(srcdir)/'`gpg-error.c
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gpg_error-gpg-error.Tpo $(DEPDIR)/gpg_error-gpg-error.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpg-error.c' object='gpg_error-gpg-error.o' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpg_error-gpg-error.o `test -f 'gpg-error.c' || echo '$(srcdir)/'`gpg-error.c
+
+gpg_error-gpg-error.obj: gpg-error.c
+@am__fastdepCC_TRUE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT gpg_error-gpg-error.obj -MD -MP -MF $(DEPDIR)/gpg_error-gpg-error.Tpo -c -o gpg_error-gpg-error.obj `if test -f 'gpg-error.c'; then $(CYGPATH_W) 'gpg-error.c'; else $(CYGPATH_W) '$(srcdir)/gpg-error.c'; fi`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/gpg_error-gpg-error.Tpo $(DEPDIR)/gpg_error-gpg-error.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='gpg-error.c' object='gpg_error-gpg-error.obj' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(gpg_error_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o gpg_error-gpg-error.obj `if test -f 'gpg-error.c'; then $(CYGPATH_W) 'gpg-error.c'; else $(CYGPATH_W) '$(srcdir)/gpg-error.c'; fi`
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+install-m4dataDATA: $(m4data_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(m4datadir)" || $(MKDIR_P) "$(DESTDIR)$(m4datadir)"
+ @list='$(m4data_DATA)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \
+ $(m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \
+ done
+
+uninstall-m4dataDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(m4data_DATA)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(m4datadir)/$$f'"; \
+ rm -f "$(DESTDIR)$(m4datadir)/$$f"; \
+ done
+install-includeHEADERS: $(include_HEADERS)
+ @$(NORMAL_INSTALL)
+ test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+ @list='$(include_HEADERS)'; for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ f=$(am__strip_dir) \
+ echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \
+ $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \
+ done
+
+uninstall-includeHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(include_HEADERS)'; for p in $$list; do \
+ f=$(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \
+ rm -f "$(DESTDIR)$(includedir)/$$f"; \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(SCRIPTS) $(DATA) \
+ $(HEADERS)
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+ for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(includedir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+ clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-data-local install-includeHEADERS \
+ install-m4dataDATA
+
+install-dvi: install-dvi-am
+
+install-exec-am: install-binPROGRAMS install-binSCRIPTS \
+ install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+ uninstall-includeHEADERS uninstall-libLTLIBRARIES \
+ uninstall-m4dataDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+ clean-generic clean-libLTLIBRARIES clean-libtool ctags \
+ distclean distclean-compile distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-binPROGRAMS \
+ install-binSCRIPTS install-data install-data-am \
+ install-data-local install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am \
+ install-includeHEADERS install-info install-info-am \
+ install-libLTLIBRARIES install-m4dataDATA install-man \
+ install-pdf install-pdf-am install-ps install-ps-am \
+ install-strip installcheck installcheck-am installdirs \
+ maintainer-clean maintainer-clean-generic mostlyclean \
+ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+ pdf pdf-am ps ps-am tags uninstall uninstall-am \
+ uninstall-binPROGRAMS uninstall-binSCRIPTS \
+ uninstall-includeHEADERS uninstall-libLTLIBRARIES \
+ uninstall-m4dataDATA
+
+
+@HAVE_W32_SYSTEM_TRUE@.rc.lo:
+@HAVE_W32_SYSTEM_TRUE@ $(LTRCCOMPILE) -i "$<" -o "$@"
+
+@HAVE_W32_SYSTEM_TRUE@install-def-file: gpg-error.def
+@HAVE_W32_SYSTEM_TRUE@ $(INSTALL) gpg-error.def $(DESTDIR)$(libdir)/gpg-error.def
+
+@HAVE_W32_SYSTEM_TRUE@uninstall-def-file:
+@HAVE_W32_SYSTEM_TRUE@ -rm $(DESTDIR)$(libdir)/gpg-error.def
+@HAVE_W32_SYSTEM_FALSE@install-def-file:
+@HAVE_W32_SYSTEM_FALSE@uninstall-def-file:
+
+# We build err-sources.h and err-codes.h in the source directory.
+# This is needed because gettext does only look into the source
+# directory to find the files listed in po/POTFILE.in. To make these
+# rules work we also need to depend on Makefile.am and not on the
+# generated files Makefile.in or Makefile.
+$(srcdir)/err-sources.h: Makefile.am mkstrtable.awk err-sources.h.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=3 \
+ $(srcdir)/err-sources.h.in >$@
+
+err-sources-sym.h: Makefile mkstrtable.awk err-sources.h.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=2 -v nogettext=1 \
+ $(srcdir)/err-sources.h.in >$@
+
+$(srcdir)/err-codes.h: Makefile.am mkstrtable.awk err-codes.h.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=3 \
+ $(srcdir)/err-codes.h.in >$@
+
+err-codes-sym.h: Makefile mkstrtable.awk err-codes.h.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=2 -v nogettext=1 \
+ $(srcdir)/err-codes.h.in >$@
+
+code-to-errno.h: Makefile mkerrnos.awk errnos.in
+ $(AWK) -f $(srcdir)/mkerrnos.awk $(srcdir)/errnos.in >$@
+
+# It is correct to use $(CPP). We want the host's idea of the error codes.
+mkerrcodes.h: Makefile mkerrcodes.awk $(gpg_extra_headers)
+ $(AWK) -f $(srcdir)/mkerrcodes1.awk $(srcdir)/errnos.in >_$@
+ $(CPP) $(extra_cppflags) _$@ | grep GPG_ERR_ | \
+ $(AWK) -f $(srcdir)/mkerrcodes.awk >$@
+ -rm _$@
+
+# It is correct to use $(CPP). We want the host's idea of the error codes.
+@HAVE_W32CE_SYSTEM_TRUE@mkw32errmap.tab.h: Makefile mkw32errmap.c
+@HAVE_W32CE_SYSTEM_TRUE@ $(CPP) -DRESOLVE_MACROS $(srcdir)/mkw32errmap.c | \
+@HAVE_W32CE_SYSTEM_TRUE@ grep '{&mkw32errmap_marker' >$@
+@HAVE_W32CE_SYSTEM_TRUE@mkw32errmap.map.c: mkw32errmap
+@HAVE_W32CE_SYSTEM_TRUE@ ./mkw32errmap --map > $@
+@HAVE_W32CE_SYSTEM_TRUE@gpg-extra/errno.h: mkw32errmap
+@HAVE_W32CE_SYSTEM_TRUE@ -$(MKDIR_P) gpg-extra
+@HAVE_W32CE_SYSTEM_TRUE@ ./mkw32errmap > $@
+@HAVE_W32CE_SYSTEM_FALSE@mkw32errmap.map.c:
+@HAVE_W32CE_SYSTEM_FALSE@ echo "/*dummy*/" > $@
+
+# We use CC proper for preprocessing thus we have to convince it that
+# the data is really to be preprocessed.
+gpg-error.def: Makefile gpg-error.def.in
+ cat $(srcdir)/gpg-error.def.in >_$@.h
+ $(CPP) $(DEFAULT_INCLUDES) $(INCLUDES) $(extra_cppflags) _$@.h | \
+ grep -v '^#' >$@
+ -rm _$@.h
+
+# It is correct to use $(CC_FOR_BUILD) here. We want to run the
+# program at build time.
+mkerrcodes: mkerrcodes.c mkerrcodes.h Makefile
+ $(CC_FOR_BUILD) -I. -I$(srcdir) -o $@ $(srcdir)/mkerrcodes.c
+
+# It is correct to use $(CC_FOR_BUILD) here. We want to run the
+# program at build time.
+@HAVE_W32CE_SYSTEM_TRUE@mkw32errmap: mkw32errmap.c mkw32errmap.tab.h Makefile
+@HAVE_W32CE_SYSTEM_TRUE@ $(CC_FOR_BUILD) -I. -I$(srcdir) -o $@ $(srcdir)/mkw32errmap.c
+
+code-from-errno.h: mkerrcodes Makefile
+ ./mkerrcodes | $(AWK) -f $(srcdir)/mkerrcodes2.awk >$@
+
+errnos-sym.h: Makefile mkstrtable.awk errnos.in
+ $(AWK) -f $(srcdir)/mkstrtable.awk -v textidx=2 -v nogettext=1 \
+ -v prefix=GPG_ERR_ -v namespace=errnos_ \
+ $(srcdir)/errnos.in >$@
+
+extra-h.in: Makefile w32-add.h w32ce-add.h
+ -rm extra-h.in
+@HAVE_W32_SYSTEM_TRUE@ cat $(srcdir)/w32-add.h >>extra-h.in
+@HAVE_W32CE_SYSTEM_TRUE@ cat $(srcdir)/w32ce-add.h >>extra-h.in
+ echo EOF >>extra-h.in
+
+gpg-error.h: Makefile mkheader.awk err-sources.h.in err-codes.h.in \
+ errnos.in extra-h.in gpg-error.h.in
+ $(AWK) -f $(srcdir)/mkheader.awk \
+ $(srcdir)/err-sources.h.in \
+ $(srcdir)/err-codes.h.in \
+ $(srcdir)/errnos.in \
+ extra-h.in \
+ $(srcdir)/gpg-error.h.in > $@
+
+install-data-local:
+@HAVE_W32CE_SYSTEM_TRUE@ -$(MKDIR_P) "$(DESTDIR)$(includedir)/gpg-extra"
+@HAVE_W32CE_SYSTEM_TRUE@ $(INSTALL_DATA) gpg-extra/errno.h \
+@HAVE_W32CE_SYSTEM_TRUE@ "$(DESTDIR)$(includedir)/gpg-extra/errno.h"
+@HAVE_W32CE_SYSTEM_FALSE@ :
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libgpg-error-1.10/src/README b/libgpg-error-1.10/src/README
new file mode 100644
index 0000000..c415983
--- /dev/null
+++ b/libgpg-error-1.10/src/README
@@ -0,0 +1,47 @@
+Notes on the source code
+========================
+
+The mechanism to generate the system error codes is delicate and
+fragile, but it's the best I could come up with that supports
+cross-compilation and dynamic self-configuration. Here is how it
+works:
+
+1. Generate list of supported system error codes.
+
+mkerrcodes1.awk generates a list of supported system error codes from
+errnos.in. Each entry in the list is protected with #ifdef/#endif,
+and contains a GPG_ERR_* marker. The list is stored in "_mkerrcodes.h".
+
+2. The HOST cpp is run on _mkerrcodes.h. This evaluates the known
+system error macros to something (may be a number, maybe a constant
+expression as on the GNU/Hurd), suppressing the unknown ones. The
+output is piped into step 3.
+
+3. The cpp output is filtered with grep for only those lines which
+contain a GPG_ERR_* marker. The output is piped into step 4.
+
+4. The filtered output is processed by mkerrcodes.awk, which produces
+a table of constant expressions plus GPG_ERR_* code string symbols in
+a format suitable for the C program mkerrcodes.c. At this point we
+are crossing our fingers that the constant expressions produced by the
+system do not contain GPG_ERR_* markers. The output is stored in
+mkerrcodes.h.
+
+5. The file mkerrcodes.h is included by mkerrcodes.c, which is
+compiled to a binary executable on the BUILD system. At this point we
+are crossing our fingers that the constant expressions produced by the
+system do not depend on the build platform anymore. The output is
+post-processed by mkerrcodes2.awk and stored in "code-from-errno.h",
+which is subsequently used in the library.
+
+-- Marcus
+
+ Copyright 2006 g10 Code GmbH
+
+ This file is free software; as a special exception the author gives
+ unlimited permission to copy and/or distribute it, with or without
+ modifications, as long as this notice is preserved.
+
+ This file is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+ implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
diff --git a/libgpg-error-1.10/src/code-from-errno.c b/libgpg-error-1.10/src/code-from-errno.c
new file mode 100644
index 0000000..96fcf20
--- /dev/null
+++ b/libgpg-error-1.10/src/code-from-errno.c
@@ -0,0 +1,69 @@
+/* code-from-errno.c - Mapping errnos to error codes.
+ Copyright (C) 2003 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <errno.h>
+
+#include <gpg-error.h>
+
+#include "code-from-errno.h"
+
+/* Retrieve the error code for the system error ERR. This returns
+ GPG_ERR_UNKNOWN_ERRNO if the system error is not mapped (report
+ this). */
+gpg_err_code_t
+gpg_err_code_from_errno (int err)
+{
+ int idx;
+
+ if (!err)
+ return GPG_ERR_NO_ERROR;
+
+ idx = errno_to_idx (err);
+
+ if (idx < 0)
+ return GPG_ERR_UNKNOWN_ERRNO;
+
+ return GPG_ERR_SYSTEM_ERROR | err_code_from_index[idx];
+}
+
+
+/* Retrieve the error code directly from the ERRNO variable. This
+ returns GPG_ERR_UNKNOWN_ERRNO if the system error is not mapped
+ (report this) and GPG_ERR_MISSING_ERRNO if ERRNO has the value 0. */
+gpg_err_code_t
+gpg_err_code_from_syserror (void)
+{
+ int err = errno;
+ int idx;
+
+ if (!err)
+ return GPG_ERR_MISSING_ERRNO;
+
+ idx = errno_to_idx (err);
+
+ if (idx < 0)
+ return GPG_ERR_UNKNOWN_ERRNO;
+
+ return GPG_ERR_SYSTEM_ERROR | err_code_from_index[idx];
+}
diff --git a/libgpg-error-1.10/src/code-to-errno.c b/libgpg-error-1.10/src/code-to-errno.c
new file mode 100644
index 0000000..5873aad
--- /dev/null
+++ b/libgpg-error-1.10/src/code-to-errno.c
@@ -0,0 +1,42 @@
+/* code-to-errno.c - Mapping error codes to errnos.
+ Copyright (C) 2003 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <gpg-error.h>
+
+#include "code-to-errno.h"
+
+/* Retrieve the system error for the error code CODE. This returns 0
+ if CODE is not a system error code. */
+int
+gpg_err_code_to_errno (gpg_err_code_t code)
+{
+ if (!(code & GPG_ERR_SYSTEM_ERROR))
+ return 0;
+ code &= ~GPG_ERR_SYSTEM_ERROR;
+
+ if (code < sizeof (err_code_to_errno) / sizeof (err_code_to_errno[0]))
+ return err_code_to_errno[code];
+ else
+ return 0;
+}
diff --git a/libgpg-error-1.10/src/err-codes.h b/libgpg-error-1.10/src/err-codes.h
new file mode 100644
index 0000000..619ca02
--- /dev/null
+++ b/libgpg-error-1.10/src/err-codes.h
@@ -0,0 +1,536 @@
+/* Output of mkstrtable.awk. DO NOT EDIT. */
+
+/* err-codes.h - List of error codes and their description.
+ Copyright (C) 2003, 2004 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+
+/* The purpose of this complex string table is to produce
+ optimal code with a minimum of relocations. */
+
+static const char msgstr[] =
+ gettext_noop ("Success") "\0"
+ gettext_noop ("General error") "\0"
+ gettext_noop ("Unknown packet") "\0"
+ gettext_noop ("Unknown version in packet") "\0"
+ gettext_noop ("Invalid public key algorithm") "\0"
+ gettext_noop ("Invalid digest algorithm") "\0"
+ gettext_noop ("Bad public key") "\0"
+ gettext_noop ("Bad secret key") "\0"
+ gettext_noop ("Bad signature") "\0"
+ gettext_noop ("No public key") "\0"
+ gettext_noop ("Checksum error") "\0"
+ gettext_noop ("Bad passphrase") "\0"
+ gettext_noop ("Invalid cipher algorithm") "\0"
+ gettext_noop ("Keyring open") "\0"
+ gettext_noop ("Invalid packet") "\0"
+ gettext_noop ("Invalid armor") "\0"
+ gettext_noop ("No user ID") "\0"
+ gettext_noop ("No secret key") "\0"
+ gettext_noop ("Wrong secret key used") "\0"
+ gettext_noop ("Bad session key") "\0"
+ gettext_noop ("Unknown compression algorithm") "\0"
+ gettext_noop ("Number is not prime") "\0"
+ gettext_noop ("Invalid encoding method") "\0"
+ gettext_noop ("Invalid encryption scheme") "\0"
+ gettext_noop ("Invalid signature scheme") "\0"
+ gettext_noop ("Invalid attribute") "\0"
+ gettext_noop ("No value") "\0"
+ gettext_noop ("Not found") "\0"
+ gettext_noop ("Value not found") "\0"
+ gettext_noop ("Syntax error") "\0"
+ gettext_noop ("Bad MPI value") "\0"
+ gettext_noop ("Invalid passphrase") "\0"
+ gettext_noop ("Invalid signature class") "\0"
+ gettext_noop ("Resources exhausted") "\0"
+ gettext_noop ("Invalid keyring") "\0"
+ gettext_noop ("Trust DB error") "\0"
+ gettext_noop ("Bad certificate") "\0"
+ gettext_noop ("Invalid user ID") "\0"
+ gettext_noop ("Unexpected error") "\0"
+ gettext_noop ("Time conflict") "\0"
+ gettext_noop ("Keyserver error") "\0"
+ gettext_noop ("Wrong public key algorithm") "\0"
+ gettext_noop ("Tribute to D. A.") "\0"
+ gettext_noop ("Weak encryption key") "\0"
+ gettext_noop ("Invalid key length") "\0"
+ gettext_noop ("Invalid argument") "\0"
+ gettext_noop ("Syntax error in URI") "\0"
+ gettext_noop ("Invalid URI") "\0"
+ gettext_noop ("Network error") "\0"
+ gettext_noop ("Unknown host") "\0"
+ gettext_noop ("Selftest failed") "\0"
+ gettext_noop ("Data not encrypted") "\0"
+ gettext_noop ("Data not processed") "\0"
+ gettext_noop ("Unusable public key") "\0"
+ gettext_noop ("Unusable secret key") "\0"
+ gettext_noop ("Invalid value") "\0"
+ gettext_noop ("Bad certificate chain") "\0"
+ gettext_noop ("Missing certificate") "\0"
+ gettext_noop ("No data") "\0"
+ gettext_noop ("Bug") "\0"
+ gettext_noop ("Not supported") "\0"
+ gettext_noop ("Invalid operation code") "\0"
+ gettext_noop ("Timeout") "\0"
+ gettext_noop ("Internal error") "\0"
+ gettext_noop ("EOF (gcrypt)") "\0"
+ gettext_noop ("Invalid object") "\0"
+ gettext_noop ("Provided object is too short") "\0"
+ gettext_noop ("Provided object is too large") "\0"
+ gettext_noop ("Missing item in object") "\0"
+ gettext_noop ("Not implemented") "\0"
+ gettext_noop ("Conflicting use") "\0"
+ gettext_noop ("Invalid cipher mode") "\0"
+ gettext_noop ("Invalid flag") "\0"
+ gettext_noop ("Invalid handle") "\0"
+ gettext_noop ("Result truncated") "\0"
+ gettext_noop ("Incomplete line") "\0"
+ gettext_noop ("Invalid response") "\0"
+ gettext_noop ("No agent running") "\0"
+ gettext_noop ("agent error") "\0"
+ gettext_noop ("Invalid data") "\0"
+ gettext_noop ("Unspecific Assuan server fault") "\0"
+ gettext_noop ("General Assuan error") "\0"
+ gettext_noop ("Invalid session key") "\0"
+ gettext_noop ("Invalid S-expression") "\0"
+ gettext_noop ("Unsupported algorithm") "\0"
+ gettext_noop ("No pinentry") "\0"
+ gettext_noop ("pinentry error") "\0"
+ gettext_noop ("Bad PIN") "\0"
+ gettext_noop ("Invalid name") "\0"
+ gettext_noop ("Bad data") "\0"
+ gettext_noop ("Invalid parameter") "\0"
+ gettext_noop ("Wrong card") "\0"
+ gettext_noop ("No dirmngr") "\0"
+ gettext_noop ("dirmngr error") "\0"
+ gettext_noop ("Certificate revoked") "\0"
+ gettext_noop ("No CRL known") "\0"
+ gettext_noop ("CRL too old") "\0"
+ gettext_noop ("Line too long") "\0"
+ gettext_noop ("Not trusted") "\0"
+ gettext_noop ("Operation cancelled") "\0"
+ gettext_noop ("Bad CA certificate") "\0"
+ gettext_noop ("Certificate expired") "\0"
+ gettext_noop ("Certificate too young") "\0"
+ gettext_noop ("Unsupported certificate") "\0"
+ gettext_noop ("Unknown S-expression") "\0"
+ gettext_noop ("Unsupported protection") "\0"
+ gettext_noop ("Corrupted protection") "\0"
+ gettext_noop ("Ambiguous name") "\0"
+ gettext_noop ("Card error") "\0"
+ gettext_noop ("Card reset required") "\0"
+ gettext_noop ("Card removed") "\0"
+ gettext_noop ("Invalid card") "\0"
+ gettext_noop ("Card not present") "\0"
+ gettext_noop ("No PKCS15 application") "\0"
+ gettext_noop ("Not confirmed") "\0"
+ gettext_noop ("Configuration error") "\0"
+ gettext_noop ("No policy match") "\0"
+ gettext_noop ("Invalid index") "\0"
+ gettext_noop ("Invalid ID") "\0"
+ gettext_noop ("No SmartCard daemon") "\0"
+ gettext_noop ("SmartCard daemon error") "\0"
+ gettext_noop ("Unsupported protocol") "\0"
+ gettext_noop ("Bad PIN method") "\0"
+ gettext_noop ("Card not initialized") "\0"
+ gettext_noop ("Unsupported operation") "\0"
+ gettext_noop ("Wrong key usage") "\0"
+ gettext_noop ("Nothing found") "\0"
+ gettext_noop ("Wrong blob type") "\0"
+ gettext_noop ("Missing value") "\0"
+ gettext_noop ("Hardware problem") "\0"
+ gettext_noop ("PIN blocked") "\0"
+ gettext_noop ("Conditions of use not satisfied") "\0"
+ gettext_noop ("PINs are not synced") "\0"
+ gettext_noop ("Invalid CRL") "\0"
+ gettext_noop ("BER error") "\0"
+ gettext_noop ("Invalid BER") "\0"
+ gettext_noop ("Element not found") "\0"
+ gettext_noop ("Identifier not found") "\0"
+ gettext_noop ("Invalid tag") "\0"
+ gettext_noop ("Invalid length") "\0"
+ gettext_noop ("Invalid key info") "\0"
+ gettext_noop ("Unexpected tag") "\0"
+ gettext_noop ("Not DER encoded") "\0"
+ gettext_noop ("No CMS object") "\0"
+ gettext_noop ("Invalid CMS object") "\0"
+ gettext_noop ("Unknown CMS object") "\0"
+ gettext_noop ("Unsupported CMS object") "\0"
+ gettext_noop ("Unsupported encoding") "\0"
+ gettext_noop ("Unsupported CMS version") "\0"
+ gettext_noop ("Unknown algorithm") "\0"
+ gettext_noop ("Invalid crypto engine") "\0"
+ gettext_noop ("Public key not trusted") "\0"
+ gettext_noop ("Decryption failed") "\0"
+ gettext_noop ("Key expired") "\0"
+ gettext_noop ("Signature expired") "\0"
+ gettext_noop ("Encoding problem") "\0"
+ gettext_noop ("Invalid state") "\0"
+ gettext_noop ("Duplicated value") "\0"
+ gettext_noop ("Missing action") "\0"
+ gettext_noop ("ASN.1 module not found") "\0"
+ gettext_noop ("Invalid OID string") "\0"
+ gettext_noop ("Invalid time") "\0"
+ gettext_noop ("Invalid CRL object") "\0"
+ gettext_noop ("Unsupported CRL version") "\0"
+ gettext_noop ("Invalid certificate object") "\0"
+ gettext_noop ("Unknown name") "\0"
+ gettext_noop ("A locale function failed") "\0"
+ gettext_noop ("Not locked") "\0"
+ gettext_noop ("Protocol violation") "\0"
+ gettext_noop ("Invalid MAC") "\0"
+ gettext_noop ("Invalid request") "\0"
+ gettext_noop ("Unknown extension") "\0"
+ gettext_noop ("Unknown critical extension") "\0"
+ gettext_noop ("Locked") "\0"
+ gettext_noop ("Unknown option") "\0"
+ gettext_noop ("Unknown command") "\0"
+ gettext_noop ("Not operational") "\0"
+ gettext_noop ("No passphrase given") "\0"
+ gettext_noop ("No PIN given") "\0"
+ gettext_noop ("Not enabled") "\0"
+ gettext_noop ("No crypto engine") "\0"
+ gettext_noop ("Missing key") "\0"
+ gettext_noop ("Too many objects") "\0"
+ gettext_noop ("Limit reached") "\0"
+ gettext_noop ("Not initialized") "\0"
+ gettext_noop ("Missing issuer certificate") "\0"
+ gettext_noop ("Operation fully cancelled") "\0"
+ gettext_noop ("Operation not yet finished") "\0"
+ gettext_noop ("Buffer too short") "\0"
+ gettext_noop ("Invalid length specifier in S-expression") "\0"
+ gettext_noop ("String too long in S-expression") "\0"
+ gettext_noop ("Unmatched parentheses in S-expression") "\0"
+ gettext_noop ("S-expression not canonical") "\0"
+ gettext_noop ("Bad character in S-expression") "\0"
+ gettext_noop ("Bad quotation in S-expression") "\0"
+ gettext_noop ("Zero prefix in S-expression") "\0"
+ gettext_noop ("Nested display hints in S-expression") "\0"
+ gettext_noop ("Unmatched display hints") "\0"
+ gettext_noop ("Unexpected reserved punctuation in S-expression") "\0"
+ gettext_noop ("Bad hexadecimal character in S-expression") "\0"
+ gettext_noop ("Odd hexadecimal numbers in S-expression") "\0"
+ gettext_noop ("Bad octal character in S-expression") "\0"
+ gettext_noop ("General IPC error") "\0"
+ gettext_noop ("IPC accept call failed") "\0"
+ gettext_noop ("IPC connect call failed") "\0"
+ gettext_noop ("Invalid IPC response") "\0"
+ gettext_noop ("Invalid value passed to IPC") "\0"
+ gettext_noop ("Incomplete line passed to IPC") "\0"
+ gettext_noop ("Line passed to IPC too long") "\0"
+ gettext_noop ("Nested IPC commands") "\0"
+ gettext_noop ("No data callback in IPC") "\0"
+ gettext_noop ("No inquire callback in IPC") "\0"
+ gettext_noop ("Not an IPC server") "\0"
+ gettext_noop ("Not an IPC client") "\0"
+ gettext_noop ("Problem starting IPC server") "\0"
+ gettext_noop ("IPC read error") "\0"
+ gettext_noop ("IPC write error") "\0"
+ gettext_noop ("Too much data for IPC layer") "\0"
+ gettext_noop ("Unexpected IPC command") "\0"
+ gettext_noop ("Unknown IPC command") "\0"
+ gettext_noop ("IPC syntax error") "\0"
+ gettext_noop ("IPC call has been cancelled") "\0"
+ gettext_noop ("No input source for IPC") "\0"
+ gettext_noop ("No output source for IPC") "\0"
+ gettext_noop ("IPC parameter error") "\0"
+ gettext_noop ("Unknown IPC inquire") "\0"
+ gettext_noop ("User defined error code 1") "\0"
+ gettext_noop ("User defined error code 2") "\0"
+ gettext_noop ("User defined error code 3") "\0"
+ gettext_noop ("User defined error code 4") "\0"
+ gettext_noop ("User defined error code 5") "\0"
+ gettext_noop ("User defined error code 6") "\0"
+ gettext_noop ("User defined error code 7") "\0"
+ gettext_noop ("User defined error code 8") "\0"
+ gettext_noop ("User defined error code 9") "\0"
+ gettext_noop ("User defined error code 10") "\0"
+ gettext_noop ("User defined error code 11") "\0"
+ gettext_noop ("User defined error code 12") "\0"
+ gettext_noop ("User defined error code 13") "\0"
+ gettext_noop ("User defined error code 14") "\0"
+ gettext_noop ("User defined error code 15") "\0"
+ gettext_noop ("User defined error code 16") "\0"
+ gettext_noop ("System error w/o errno") "\0"
+ gettext_noop ("Unknown system error") "\0"
+ gettext_noop ("End of file") "\0"
+ gettext_noop ("Unknown error code");
+
+static const int msgidx[] =
+ {
+ 0,
+ 8,
+ 22,
+ 37,
+ 63,
+ 92,
+ 117,
+ 132,
+ 147,
+ 161,
+ 175,
+ 190,
+ 205,
+ 230,
+ 243,
+ 258,
+ 272,
+ 283,
+ 297,
+ 319,
+ 335,
+ 365,
+ 385,
+ 409,
+ 435,
+ 460,
+ 478,
+ 487,
+ 497,
+ 513,
+ 526,
+ 540,
+ 559,
+ 583,
+ 603,
+ 619,
+ 634,
+ 650,
+ 666,
+ 683,
+ 697,
+ 713,
+ 740,
+ 757,
+ 777,
+ 796,
+ 813,
+ 833,
+ 845,
+ 859,
+ 872,
+ 888,
+ 907,
+ 926,
+ 946,
+ 966,
+ 980,
+ 1002,
+ 1022,
+ 1030,
+ 1034,
+ 1048,
+ 1071,
+ 1079,
+ 1094,
+ 1107,
+ 1122,
+ 1151,
+ 1180,
+ 1203,
+ 1219,
+ 1235,
+ 1255,
+ 1268,
+ 1283,
+ 1300,
+ 1316,
+ 1333,
+ 1350,
+ 1362,
+ 1375,
+ 1406,
+ 1427,
+ 1447,
+ 1468,
+ 1490,
+ 1502,
+ 1517,
+ 1525,
+ 1538,
+ 1547,
+ 1565,
+ 1576,
+ 1587,
+ 1601,
+ 1621,
+ 1634,
+ 1646,
+ 1660,
+ 1672,
+ 1692,
+ 1711,
+ 1731,
+ 1753,
+ 1777,
+ 1798,
+ 1821,
+ 1842,
+ 1857,
+ 1868,
+ 1888,
+ 1901,
+ 1914,
+ 1931,
+ 1953,
+ 1967,
+ 1987,
+ 2003,
+ 2017,
+ 2028,
+ 2048,
+ 2071,
+ 2092,
+ 2107,
+ 2128,
+ 2150,
+ 2166,
+ 2180,
+ 2196,
+ 2210,
+ 2227,
+ 2239,
+ 2271,
+ 2291,
+ 2303,
+ 2313,
+ 2325,
+ 2343,
+ 2364,
+ 2376,
+ 2391,
+ 2408,
+ 2423,
+ 2439,
+ 2453,
+ 2472,
+ 2491,
+ 2514,
+ 2535,
+ 2559,
+ 2577,
+ 2599,
+ 2622,
+ 2640,
+ 2652,
+ 2670,
+ 2687,
+ 2701,
+ 2718,
+ 2733,
+ 2756,
+ 2775,
+ 2788,
+ 2807,
+ 2831,
+ 2858,
+ 2871,
+ 2896,
+ 2907,
+ 2926,
+ 2938,
+ 2954,
+ 2972,
+ 2999,
+ 3006,
+ 3021,
+ 3037,
+ 3053,
+ 3073,
+ 3086,
+ 3098,
+ 3115,
+ 3127,
+ 3144,
+ 3158,
+ 3174,
+ 3201,
+ 3227,
+ 3254,
+ 3271,
+ 3312,
+ 3344,
+ 3382,
+ 3409,
+ 3439,
+ 3469,
+ 3497,
+ 3534,
+ 3558,
+ 3606,
+ 3648,
+ 3688,
+ 3724,
+ 3742,
+ 3765,
+ 3789,
+ 3810,
+ 3838,
+ 3868,
+ 3896,
+ 3916,
+ 3940,
+ 3967,
+ 3985,
+ 4003,
+ 4031,
+ 4046,
+ 4062,
+ 4090,
+ 4113,
+ 4133,
+ 4150,
+ 4178,
+ 4202,
+ 4227,
+ 4247,
+ 4267,
+ 4293,
+ 4319,
+ 4345,
+ 4371,
+ 4397,
+ 4423,
+ 4449,
+ 4475,
+ 4501,
+ 4528,
+ 4555,
+ 4582,
+ 4609,
+ 4636,
+ 4663,
+ 4690,
+ 4713,
+ 4734,
+ 4746
+ };
+
+static inline int
+msgidxof (int code)
+{
+ return (0 ? 0
+ : ((code >= 0) && (code <= 185)) ? (code - 0)
+ : ((code >= 198) && (code <= 213)) ? (code - 12)
+ : ((code >= 257) && (code <= 271)) ? (code - 55)
+ : ((code >= 273) && (code <= 281)) ? (code - 56)
+ : ((code >= 1024) && (code <= 1039)) ? (code - 798)
+ : ((code >= 16381) && (code <= 16383)) ? (code - 16139)
+ : 16384 - 16139);
+}
diff --git a/libgpg-error-1.10/src/err-codes.h.in b/libgpg-error-1.10/src/err-codes.h.in
new file mode 100644
index 0000000..501c5e2
--- /dev/null
+++ b/libgpg-error-1.10/src/err-codes.h.in
@@ -0,0 +1,301 @@
+# err-codes.h.in - List of error codes and their description input file.
+/* err-codes.h - List of error codes and their description.
+ Copyright (C) 2003, 2004 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+# Everything up to the first line that starts with a number in the
+# first column is copied into the output verbatim. Then, empty lines
+# are ignored. Other lines must have an error code number, followed
+# by one or more <tab> characters, followed by the error code symbol,
+# followed by one or more <tab> characters, followed by the error
+# message. Trailing whitespace is removed. The error codes should be
+# sorted. The last line should not have a number, but only a <tab>,
+# followed by a dummy field, followed by a <tab>, followed by a
+# description for error codes that are not in the list.
+
+0 GPG_ERR_NO_ERROR Success
+1 GPG_ERR_GENERAL General error
+2 GPG_ERR_UNKNOWN_PACKET Unknown packet
+3 GPG_ERR_UNKNOWN_VERSION Unknown version in packet
+4 GPG_ERR_PUBKEY_ALGO Invalid public key algorithm
+5 GPG_ERR_DIGEST_ALGO Invalid digest algorithm
+6 GPG_ERR_BAD_PUBKEY Bad public key
+7 GPG_ERR_BAD_SECKEY Bad secret key
+8 GPG_ERR_BAD_SIGNATURE Bad signature
+9 GPG_ERR_NO_PUBKEY No public key
+10 GPG_ERR_CHECKSUM Checksum error
+11 GPG_ERR_BAD_PASSPHRASE Bad passphrase
+12 GPG_ERR_CIPHER_ALGO Invalid cipher algorithm
+13 GPG_ERR_KEYRING_OPEN Keyring open
+14 GPG_ERR_INV_PACKET Invalid packet
+15 GPG_ERR_INV_ARMOR Invalid armor
+16 GPG_ERR_NO_USER_ID No user ID
+17 GPG_ERR_NO_SECKEY No secret key
+18 GPG_ERR_WRONG_SECKEY Wrong secret key used
+19 GPG_ERR_BAD_KEY Bad session key
+20 GPG_ERR_COMPR_ALGO Unknown compression algorithm
+21 GPG_ERR_NO_PRIME Number is not prime
+22 GPG_ERR_NO_ENCODING_METHOD Invalid encoding method
+23 GPG_ERR_NO_ENCRYPTION_SCHEME Invalid encryption scheme
+24 GPG_ERR_NO_SIGNATURE_SCHEME Invalid signature scheme
+25 GPG_ERR_INV_ATTR Invalid attribute
+26 GPG_ERR_NO_VALUE No value
+27 GPG_ERR_NOT_FOUND Not found
+28 GPG_ERR_VALUE_NOT_FOUND Value not found
+29 GPG_ERR_SYNTAX Syntax error
+30 GPG_ERR_BAD_MPI Bad MPI value
+31 GPG_ERR_INV_PASSPHRASE Invalid passphrase
+32 GPG_ERR_SIG_CLASS Invalid signature class
+33 GPG_ERR_RESOURCE_LIMIT Resources exhausted
+34 GPG_ERR_INV_KEYRING Invalid keyring
+35 GPG_ERR_TRUSTDB Trust DB error
+36 GPG_ERR_BAD_CERT Bad certificate
+37 GPG_ERR_INV_USER_ID Invalid user ID
+38 GPG_ERR_UNEXPECTED Unexpected error
+39 GPG_ERR_TIME_CONFLICT Time conflict
+40 GPG_ERR_KEYSERVER Keyserver error
+41 GPG_ERR_WRONG_PUBKEY_ALGO Wrong public key algorithm
+42 GPG_ERR_TRIBUTE_TO_D_A Tribute to D. A.
+43 GPG_ERR_WEAK_KEY Weak encryption key
+44 GPG_ERR_INV_KEYLEN Invalid key length
+45 GPG_ERR_INV_ARG Invalid argument
+46 GPG_ERR_BAD_URI Syntax error in URI
+47 GPG_ERR_INV_URI Invalid URI
+48 GPG_ERR_NETWORK Network error
+49 GPG_ERR_UNKNOWN_HOST Unknown host
+50 GPG_ERR_SELFTEST_FAILED Selftest failed
+51 GPG_ERR_NOT_ENCRYPTED Data not encrypted
+52 GPG_ERR_NOT_PROCESSED Data not processed
+53 GPG_ERR_UNUSABLE_PUBKEY Unusable public key
+54 GPG_ERR_UNUSABLE_SECKEY Unusable secret key
+55 GPG_ERR_INV_VALUE Invalid value
+56 GPG_ERR_BAD_CERT_CHAIN Bad certificate chain
+57 GPG_ERR_MISSING_CERT Missing certificate
+58 GPG_ERR_NO_DATA No data
+59 GPG_ERR_BUG Bug
+60 GPG_ERR_NOT_SUPPORTED Not supported
+61 GPG_ERR_INV_OP Invalid operation code
+62 GPG_ERR_TIMEOUT Timeout
+63 GPG_ERR_INTERNAL Internal error
+64 GPG_ERR_EOF_GCRYPT EOF (gcrypt)
+65 GPG_ERR_INV_OBJ Invalid object
+66 GPG_ERR_TOO_SHORT Provided object is too short
+67 GPG_ERR_TOO_LARGE Provided object is too large
+68 GPG_ERR_NO_OBJ Missing item in object
+69 GPG_ERR_NOT_IMPLEMENTED Not implemented
+70 GPG_ERR_CONFLICT Conflicting use
+71 GPG_ERR_INV_CIPHER_MODE Invalid cipher mode
+72 GPG_ERR_INV_FLAG Invalid flag
+73 GPG_ERR_INV_HANDLE Invalid handle
+74 GPG_ERR_TRUNCATED Result truncated
+75 GPG_ERR_INCOMPLETE_LINE Incomplete line
+76 GPG_ERR_INV_RESPONSE Invalid response
+77 GPG_ERR_NO_AGENT No agent running
+78 GPG_ERR_AGENT agent error
+79 GPG_ERR_INV_DATA Invalid data
+80 GPG_ERR_ASSUAN_SERVER_FAULT Unspecific Assuan server fault
+81 GPG_ERR_ASSUAN General Assuan error
+82 GPG_ERR_INV_SESSION_KEY Invalid session key
+83 GPG_ERR_INV_SEXP Invalid S-expression
+84 GPG_ERR_UNSUPPORTED_ALGORITHM Unsupported algorithm
+85 GPG_ERR_NO_PIN_ENTRY No pinentry
+86 GPG_ERR_PIN_ENTRY pinentry error
+87 GPG_ERR_BAD_PIN Bad PIN
+88 GPG_ERR_INV_NAME Invalid name
+89 GPG_ERR_BAD_DATA Bad data
+90 GPG_ERR_INV_PARAMETER Invalid parameter
+91 GPG_ERR_WRONG_CARD Wrong card
+92 GPG_ERR_NO_DIRMNGR No dirmngr
+93 GPG_ERR_DIRMNGR dirmngr error
+94 GPG_ERR_CERT_REVOKED Certificate revoked
+95 GPG_ERR_NO_CRL_KNOWN No CRL known
+96 GPG_ERR_CRL_TOO_OLD CRL too old
+97 GPG_ERR_LINE_TOO_LONG Line too long
+98 GPG_ERR_NOT_TRUSTED Not trusted
+99 GPG_ERR_CANCELED Operation cancelled
+100 GPG_ERR_BAD_CA_CERT Bad CA certificate
+101 GPG_ERR_CERT_EXPIRED Certificate expired
+102 GPG_ERR_CERT_TOO_YOUNG Certificate too young
+103 GPG_ERR_UNSUPPORTED_CERT Unsupported certificate
+104 GPG_ERR_UNKNOWN_SEXP Unknown S-expression
+105 GPG_ERR_UNSUPPORTED_PROTECTION Unsupported protection
+106 GPG_ERR_CORRUPTED_PROTECTION Corrupted protection
+107 GPG_ERR_AMBIGUOUS_NAME Ambiguous name
+108 GPG_ERR_CARD Card error
+109 GPG_ERR_CARD_RESET Card reset required
+110 GPG_ERR_CARD_REMOVED Card removed
+111 GPG_ERR_INV_CARD Invalid card
+112 GPG_ERR_CARD_NOT_PRESENT Card not present
+113 GPG_ERR_NO_PKCS15_APP No PKCS15 application
+114 GPG_ERR_NOT_CONFIRMED Not confirmed
+115 GPG_ERR_CONFIGURATION Configuration error
+116 GPG_ERR_NO_POLICY_MATCH No policy match
+117 GPG_ERR_INV_INDEX Invalid index
+118 GPG_ERR_INV_ID Invalid ID
+119 GPG_ERR_NO_SCDAEMON No SmartCard daemon
+120 GPG_ERR_SCDAEMON SmartCard daemon error
+121 GPG_ERR_UNSUPPORTED_PROTOCOL Unsupported protocol
+122 GPG_ERR_BAD_PIN_METHOD Bad PIN method
+123 GPG_ERR_CARD_NOT_INITIALIZED Card not initialized
+124 GPG_ERR_UNSUPPORTED_OPERATION Unsupported operation
+125 GPG_ERR_WRONG_KEY_USAGE Wrong key usage
+126 GPG_ERR_NOTHING_FOUND Nothing found
+127 GPG_ERR_WRONG_BLOB_TYPE Wrong blob type
+128 GPG_ERR_MISSING_VALUE Missing value
+129 GPG_ERR_HARDWARE Hardware problem
+130 GPG_ERR_PIN_BLOCKED PIN blocked
+131 GPG_ERR_USE_CONDITIONS Conditions of use not satisfied
+132 GPG_ERR_PIN_NOT_SYNCED PINs are not synced
+133 GPG_ERR_INV_CRL Invalid CRL
+134 GPG_ERR_BAD_BER BER error
+135 GPG_ERR_INV_BER Invalid BER
+136 GPG_ERR_ELEMENT_NOT_FOUND Element not found
+137 GPG_ERR_IDENTIFIER_NOT_FOUND Identifier not found
+138 GPG_ERR_INV_TAG Invalid tag
+139 GPG_ERR_INV_LENGTH Invalid length
+140 GPG_ERR_INV_KEYINFO Invalid key info
+141 GPG_ERR_UNEXPECTED_TAG Unexpected tag
+142 GPG_ERR_NOT_DER_ENCODED Not DER encoded
+143 GPG_ERR_NO_CMS_OBJ No CMS object
+144 GPG_ERR_INV_CMS_OBJ Invalid CMS object
+145 GPG_ERR_UNKNOWN_CMS_OBJ Unknown CMS object
+146 GPG_ERR_UNSUPPORTED_CMS_OBJ Unsupported CMS object
+147 GPG_ERR_UNSUPPORTED_ENCODING Unsupported encoding
+148 GPG_ERR_UNSUPPORTED_CMS_VERSION Unsupported CMS version
+149 GPG_ERR_UNKNOWN_ALGORITHM Unknown algorithm
+150 GPG_ERR_INV_ENGINE Invalid crypto engine
+151 GPG_ERR_PUBKEY_NOT_TRUSTED Public key not trusted
+152 GPG_ERR_DECRYPT_FAILED Decryption failed
+153 GPG_ERR_KEY_EXPIRED Key expired
+154 GPG_ERR_SIG_EXPIRED Signature expired
+155 GPG_ERR_ENCODING_PROBLEM Encoding problem
+156 GPG_ERR_INV_STATE Invalid state
+157 GPG_ERR_DUP_VALUE Duplicated value
+158 GPG_ERR_MISSING_ACTION Missing action
+159 GPG_ERR_MODULE_NOT_FOUND ASN.1 module not found
+160 GPG_ERR_INV_OID_STRING Invalid OID string
+161 GPG_ERR_INV_TIME Invalid time
+162 GPG_ERR_INV_CRL_OBJ Invalid CRL object
+163 GPG_ERR_UNSUPPORTED_CRL_VERSION Unsupported CRL version
+164 GPG_ERR_INV_CERT_OBJ Invalid certificate object
+165 GPG_ERR_UNKNOWN_NAME Unknown name
+166 GPG_ERR_LOCALE_PROBLEM A locale function failed
+167 GPG_ERR_NOT_LOCKED Not locked
+168 GPG_ERR_PROTOCOL_VIOLATION Protocol violation
+169 GPG_ERR_INV_MAC Invalid MAC
+170 GPG_ERR_INV_REQUEST Invalid request
+171 GPG_ERR_UNKNOWN_EXTN Unknown extension
+172 GPG_ERR_UNKNOWN_CRIT_EXTN Unknown critical extension
+173 GPG_ERR_LOCKED Locked
+174 GPG_ERR_UNKNOWN_OPTION Unknown option
+175 GPG_ERR_UNKNOWN_COMMAND Unknown command
+176 GPG_ERR_NOT_OPERATIONAL Not operational
+177 GPG_ERR_NO_PASSPHRASE No passphrase given
+178 GPG_ERR_NO_PIN No PIN given
+179 GPG_ERR_NOT_ENABLED Not enabled
+180 GPG_ERR_NO_ENGINE No crypto engine
+181 GPG_ERR_MISSING_KEY Missing key
+182 GPG_ERR_TOO_MANY Too many objects
+183 GPG_ERR_LIMIT_REACHED Limit reached
+184 GPG_ERR_NOT_INITIALIZED Not initialized
+185 GPG_ERR_MISSING_ISSUER_CERT Missing issuer certificate
+# 186 to 197 are free to be used.
+
+198 GPG_ERR_FULLY_CANCELED Operation fully cancelled
+199 GPG_ERR_UNFINISHED Operation not yet finished
+200 GPG_ERR_BUFFER_TOO_SHORT Buffer too short
+
+# Error codes pertaining to S-expressions.
+
+201 GPG_ERR_SEXP_INV_LEN_SPEC Invalid length specifier in S-expression
+202 GPG_ERR_SEXP_STRING_TOO_LONG String too long in S-expression
+203 GPG_ERR_SEXP_UNMATCHED_PAREN Unmatched parentheses in S-expression
+204 GPG_ERR_SEXP_NOT_CANONICAL S-expression not canonical
+205 GPG_ERR_SEXP_BAD_CHARACTER Bad character in S-expression
+206 GPG_ERR_SEXP_BAD_QUOTATION Bad quotation in S-expression
+207 GPG_ERR_SEXP_ZERO_PREFIX Zero prefix in S-expression
+208 GPG_ERR_SEXP_NESTED_DH Nested display hints in S-expression
+209 GPG_ERR_SEXP_UNMATCHED_DH Unmatched display hints
+210 GPG_ERR_SEXP_UNEXPECTED_PUNC Unexpected reserved punctuation in S-expression
+211 GPG_ERR_SEXP_BAD_HEX_CHAR Bad hexadecimal character in S-expression
+212 GPG_ERR_SEXP_ODD_HEX_NUMBERS Odd hexadecimal numbers in S-expression
+213 GPG_ERR_SEXP_BAD_OCT_CHAR Bad octal character in S-expression
+
+# 214 to 254 are free to be used. 255 and 256 are RFU.
+
+# Error codes pertaining to the Assuan IPC interface
+257 GPG_ERR_ASS_GENERAL General IPC error
+258 GPG_ERR_ASS_ACCEPT_FAILED IPC accept call failed
+259 GPG_ERR_ASS_CONNECT_FAILED IPC connect call failed
+260 GPG_ERR_ASS_INV_RESPONSE Invalid IPC response
+261 GPG_ERR_ASS_INV_VALUE Invalid value passed to IPC
+262 GPG_ERR_ASS_INCOMPLETE_LINE Incomplete line passed to IPC
+263 GPG_ERR_ASS_LINE_TOO_LONG Line passed to IPC too long
+264 GPG_ERR_ASS_NESTED_COMMANDS Nested IPC commands
+265 GPG_ERR_ASS_NO_DATA_CB No data callback in IPC
+266 GPG_ERR_ASS_NO_INQUIRE_CB No inquire callback in IPC
+267 GPG_ERR_ASS_NOT_A_SERVER Not an IPC server
+268 GPG_ERR_ASS_NOT_A_CLIENT Not an IPC client
+269 GPG_ERR_ASS_SERVER_START Problem starting IPC server
+270 GPG_ERR_ASS_READ_ERROR IPC read error
+271 GPG_ERR_ASS_WRITE_ERROR IPC write error
+# reserved
+273 GPG_ERR_ASS_TOO_MUCH_DATA Too much data for IPC layer
+274 GPG_ERR_ASS_UNEXPECTED_CMD Unexpected IPC command
+275 GPG_ERR_ASS_UNKNOWN_CMD Unknown IPC command
+276 GPG_ERR_ASS_SYNTAX IPC syntax error
+277 GPG_ERR_ASS_CANCELED IPC call has been cancelled
+278 GPG_ERR_ASS_NO_INPUT No input source for IPC
+279 GPG_ERR_ASS_NO_OUTPUT No output source for IPC
+280 GPG_ERR_ASS_PARAMETER IPC parameter error
+281 GPG_ERR_ASS_UNKNOWN_INQUIRE Unknown IPC inquire
+
+# 282 to 299 are reserved for future assuan codes.
+
+# 300 to 1023 are free to be used.
+
+# For free use by non-GnuPG components.
+1024 GPG_ERR_USER_1 User defined error code 1
+1025 GPG_ERR_USER_2 User defined error code 2
+1026 GPG_ERR_USER_3 User defined error code 3
+1027 GPG_ERR_USER_4 User defined error code 4
+1028 GPG_ERR_USER_5 User defined error code 5
+1029 GPG_ERR_USER_6 User defined error code 6
+1030 GPG_ERR_USER_7 User defined error code 7
+1031 GPG_ERR_USER_8 User defined error code 8
+1032 GPG_ERR_USER_9 User defined error code 9
+1033 GPG_ERR_USER_10 User defined error code 10
+1034 GPG_ERR_USER_11 User defined error code 11
+1035 GPG_ERR_USER_12 User defined error code 12
+1036 GPG_ERR_USER_13 User defined error code 13
+1037 GPG_ERR_USER_14 User defined error code 14
+1038 GPG_ERR_USER_15 User defined error code 15
+1039 GPG_ERR_USER_16 User defined error code 16
+
+# 1040 to 16380 are free to be used.
+
+16381 GPG_ERR_MISSING_ERRNO System error w/o errno
+16382 GPG_ERR_UNKNOWN_ERRNO Unknown system error
+16383 GPG_ERR_EOF End of file
+
+# 16384 - 32767 are reserved for future extensions.
+
+# GPG_SYSTEM_ERROR | (141 to 32767) are to be used for system errors.
+
+ GPG_ERR_CODE_DIM Unknown error code
diff --git a/libgpg-error-1.10/src/err-sources.h b/libgpg-error-1.10/src/err-sources.h
new file mode 100644
index 0000000..0fcc551
--- /dev/null
+++ b/libgpg-error-1.10/src/err-sources.h
@@ -0,0 +1,82 @@
+/* Output of mkstrtable.awk. DO NOT EDIT. */
+
+/* err-sources.h - List of error sources and their description.
+ Copyright (C) 2003, 2004 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+
+/* The purpose of this complex string table is to produce
+ optimal code with a minimum of relocations. */
+
+static const char msgstr[] =
+ gettext_noop ("Unspecified source") "\0"
+ gettext_noop ("gcrypt") "\0"
+ gettext_noop ("GnuPG") "\0"
+ gettext_noop ("GpgSM") "\0"
+ gettext_noop ("GPG Agent") "\0"
+ gettext_noop ("Pinentry") "\0"
+ gettext_noop ("SCD") "\0"
+ gettext_noop ("GPGME") "\0"
+ gettext_noop ("Keybox") "\0"
+ gettext_noop ("KSBA") "\0"
+ gettext_noop ("Dirmngr") "\0"
+ gettext_noop ("GSTI") "\0"
+ gettext_noop ("GPA") "\0"
+ gettext_noop ("Kleopatra") "\0"
+ gettext_noop ("G13") "\0"
+ gettext_noop ("Any source") "\0"
+ gettext_noop ("User defined source 1") "\0"
+ gettext_noop ("User defined source 2") "\0"
+ gettext_noop ("User defined source 3") "\0"
+ gettext_noop ("User defined source 4") "\0"
+ gettext_noop ("Unknown source");
+
+static const int msgidx[] =
+ {
+ 0,
+ 19,
+ 26,
+ 32,
+ 38,
+ 48,
+ 57,
+ 61,
+ 67,
+ 74,
+ 79,
+ 87,
+ 92,
+ 96,
+ 106,
+ 110,
+ 121,
+ 143,
+ 165,
+ 187,
+ 209
+ };
+
+static inline int
+msgidxof (int code)
+{
+ return (0 ? 0
+ : ((code >= 0) && (code <= 14)) ? (code - 0)
+ : ((code >= 31) && (code <= 35)) ? (code - 16)
+ : 36 - 16);
+}
diff --git a/libgpg-error-1.10/src/err-sources.h.in b/libgpg-error-1.10/src/err-sources.h.in
new file mode 100644
index 0000000..d200fc6
--- /dev/null
+++ b/libgpg-error-1.10/src/err-sources.h.in
@@ -0,0 +1,58 @@
+# err-sources.h.in - List of error sources and their description input file.
+/* err-sources.h - List of error sources and their description.
+ Copyright (C) 2003, 2004 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+# Everything up to the first line that starts with a number in the
+# first column is copied into the output verbatim. Then, empty lines
+# are ignored. Other lines must have an error source number, followed
+# by one or more <tab> characters, followed by the error source
+# symbol, followed by one or more <tab> characters, followed by the
+# error source name. Trailing whitespace is removed. The error
+# sources should be sorted. The last line should not have a number,
+# but only a <tab>, followed by a description for error sources that
+# are not in the list.
+
+0 GPG_ERR_SOURCE_UNKNOWN Unspecified source
+1 GPG_ERR_SOURCE_GCRYPT gcrypt
+2 GPG_ERR_SOURCE_GPG GnuPG
+3 GPG_ERR_SOURCE_GPGSM GpgSM
+4 GPG_ERR_SOURCE_GPGAGENT GPG Agent
+5 GPG_ERR_SOURCE_PINENTRY Pinentry
+6 GPG_ERR_SOURCE_SCD SCD
+7 GPG_ERR_SOURCE_GPGME GPGME
+8 GPG_ERR_SOURCE_KEYBOX Keybox
+9 GPG_ERR_SOURCE_KSBA KSBA
+10 GPG_ERR_SOURCE_DIRMNGR Dirmngr
+11 GPG_ERR_SOURCE_GSTI GSTI
+12 GPG_ERR_SOURCE_GPA GPA
+13 GPG_ERR_SOURCE_KLEO Kleopatra
+14 GPG_ERR_SOURCE_G13 G13
+
+# 15 to 30 are free to be used.
+
+31 GPG_ERR_SOURCE_ANY Any source
+32 GPG_ERR_SOURCE_USER_1 User defined source 1
+33 GPG_ERR_SOURCE_USER_2 User defined source 2
+34 GPG_ERR_SOURCE_USER_3 User defined source 3
+35 GPG_ERR_SOURCE_USER_4 User defined source 4
+
+# 36 to 255 are free to be used.
+
+ GPG_ERR_SOURCE_DIM Unknown source
diff --git a/libgpg-error-1.10/src/errnos.in b/libgpg-error-1.10/src/errnos.in
new file mode 100644
index 0000000..0688047
--- /dev/null
+++ b/libgpg-error-1.10/src/errnos.in
@@ -0,0 +1,172 @@
+# errnos.h.in - List of system error values input file.
+/* errnos.h - List of system error values.
+ Copyright (C) 2003, 2004 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+# Everything up to the first line that starts with a number in the
+# first column is copied into the output verbatim. Then, empty lines
+# are ignored. Other lines must have an error code number, followed
+# by one or more <tab> characters, followed by the error name.
+#
+# IMPORTANT: For now, the numbering must be consecutive. Some of the
+# scripts (notably mkerrnos.h) do not deal correctly with a numbering
+# that is out of order or has gaps.
+
+
+0 E2BIG
+1 EACCES
+2 EADDRINUSE
+3 EADDRNOTAVAIL
+4 EADV
+5 EAFNOSUPPORT
+6 EAGAIN
+7 EALREADY
+8 EAUTH
+9 EBACKGROUND
+10 EBADE
+11 EBADF
+12 EBADFD
+13 EBADMSG
+14 EBADR
+15 EBADRPC
+16 EBADRQC
+17 EBADSLT
+18 EBFONT
+19 EBUSY
+20 ECANCELED
+21 ECHILD
+22 ECHRNG
+23 ECOMM
+24 ECONNABORTED
+25 ECONNREFUSED
+26 ECONNRESET
+27 ED
+28 EDEADLK
+29 EDEADLOCK
+30 EDESTADDRREQ
+31 EDIED
+32 EDOM
+33 EDOTDOT
+34 EDQUOT
+35 EEXIST
+36 EFAULT
+37 EFBIG
+38 EFTYPE
+39 EGRATUITOUS
+40 EGREGIOUS
+41 EHOSTDOWN
+42 EHOSTUNREACH
+43 EIDRM
+44 EIEIO
+45 EILSEQ
+46 EINPROGRESS
+47 EINTR
+48 EINVAL
+49 EIO
+50 EISCONN
+51 EISDIR
+52 EISNAM
+53 EL2HLT
+54 EL2NSYNC
+55 EL3HLT
+56 EL3RST
+57 ELIBACC
+58 ELIBBAD
+59 ELIBEXEC
+60 ELIBMAX
+61 ELIBSCN
+62 ELNRNG
+63 ELOOP
+64 EMEDIUMTYPE
+65 EMFILE
+66 EMLINK
+67 EMSGSIZE
+68 EMULTIHOP
+69 ENAMETOOLONG
+70 ENAVAIL
+71 ENEEDAUTH
+72 ENETDOWN
+73 ENETRESET
+74 ENETUNREACH
+75 ENFILE
+76 ENOANO
+77 ENOBUFS
+78 ENOCSI
+79 ENODATA
+80 ENODEV
+81 ENOENT
+82 ENOEXEC
+83 ENOLCK
+84 ENOLINK
+85 ENOMEDIUM
+86 ENOMEM
+87 ENOMSG
+88 ENONET
+89 ENOPKG
+90 ENOPROTOOPT
+91 ENOSPC
+92 ENOSR
+93 ENOSTR
+94 ENOSYS
+95 ENOTBLK
+96 ENOTCONN
+97 ENOTDIR
+98 ENOTEMPTY
+99 ENOTNAM
+100 ENOTSOCK
+101 ENOTSUP
+102 ENOTTY
+103 ENOTUNIQ
+104 ENXIO
+105 EOPNOTSUPP
+106 EOVERFLOW
+107 EPERM
+108 EPFNOSUPPORT
+109 EPIPE
+110 EPROCLIM
+111 EPROCUNAVAIL
+112 EPROGMISMATCH
+113 EPROGUNAVAIL
+114 EPROTO
+115 EPROTONOSUPPORT
+116 EPROTOTYPE
+117 ERANGE
+118 EREMCHG
+119 EREMOTE
+120 EREMOTEIO
+121 ERESTART
+122 EROFS
+123 ERPCMISMATCH
+124 ESHUTDOWN
+125 ESOCKTNOSUPPORT
+126 ESPIPE
+127 ESRCH
+128 ESRMNT
+129 ESTALE
+130 ESTRPIPE
+131 ETIME
+132 ETIMEDOUT
+133 ETOOMANYREFS
+134 ETXTBSY
+135 EUCLEAN
+136 EUNATCH
+137 EUSERS
+138 EWOULDBLOCK
+139 EXDEV
+140 EXFULL
\ No newline at end of file
diff --git a/libgpg-error-1.10/src/gettext.h b/libgpg-error-1.10/src/gettext.h
new file mode 100644
index 0000000..aba29db
--- /dev/null
+++ b/libgpg-error-1.10/src/gettext.h
@@ -0,0 +1,76 @@
+/* Convenience header for conditional use of GNU <libintl.h>.
+ Copyright (C) 1995-1998, 2000-2002 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+#ifndef _LIBGETTEXT_H
+#define _LIBGETTEXT_H 1
+
+/* NLS can be disabled through the configure --disable-nls option. */
+#if ENABLE_NLS
+
+#if HAVE_W32_SYSTEM
+ /* We have a gettext implementation in gpg-error.h which get
+ included anyway. */
+#else /*!HAVE_W32_SYSTEM*/
+ /* Get declarations of GNU message catalog functions. */
+# include <libintl.h>
+#endif /*!HAVE_W32_SYSTEM*/
+
+#else /*!ENABLE_NLS*/
+
+/* Solaris /usr/include/locale.h includes /usr/include/libintl.h, which
+ chokes if dcgettext is defined as a macro. So include it now, to make
+ later inclusions of <locale.h> a NOP. We don't include <libintl.h>
+ as well because people using "gettext.h" will not include <libintl.h>,
+ and also including <libintl.h> would fail on SunOS 4, whereas <locale.h>
+ is OK. */
+#if defined(__sun)
+# include <locale.h>
+#endif
+
+/* Disabled NLS.
+ The casts to 'const char *' serve the purpose of producing warnings
+ for invalid uses of the value returned from these functions.
+ On pre-ANSI systems without 'const', the config.h file is supposed to
+ contain "#define const". */
+# define gettext(Msgid) ((const char *) (Msgid))
+# define dgettext(Domainname, Msgid) ((const char *) (Msgid))
+# define dcgettext(Domainname, Msgid, Category) ((const char *) (Msgid))
+# define ngettext(Msgid1, Msgid2, N) \
+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dngettext(Domainname, Msgid1, Msgid2, N) \
+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define dcngettext(Domainname, Msgid1, Msgid2, N, Category) \
+ ((N) == 1 ? (const char *) (Msgid1) : (const char *) (Msgid2))
+# define textdomain(Domainname) ((const char *) (Domainname))
+# define bindtextdomain(Domainname, Dirname) ((const char *) (Dirname))
+# define bind_textdomain_codeset(Domainname, Codeset) ((const char *) (Codeset))
+
+#endif /*!ENABLE_NLS*/
+
+/* A pseudo function call that serves as a marker for the automated
+ extraction of messages, but does not call gettext(). The run-time
+ translation is done at a different place in the code.
+ The argument, String, should be a literal string. Concatenated strings
+ and other string expressions won't work.
+ The macro's expansion is not parenthesized, so that it is suitable as
+ initializer for static 'char[]' or 'const char[]' variables. */
+#define gettext_noop(String) String
+
+
+
+#endif /* _LIBGETTEXT_H */
diff --git a/libgpg-error-1.10/src/gpg-error-config.in b/libgpg-error-1.10/src/gpg-error-config.in
new file mode 100644
index 0000000..4be0343
--- /dev/null
+++ b/libgpg-error-1.10/src/gpg-error-config.in
@@ -0,0 +1,84 @@
+#!/bin/sh
+# Copyright (C) 1999, 2002, 2003 Free Software Foundation, Inc.
+#
+# This file is free software; as a special exception the author gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# This file is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+includedir=@includedir@
+libdir=@libdir@
+isubdirafter="@GPG_ERROR_CONFIG_ISUBDIRAFTER@"
+
+output=""
+
+usage()
+{
+ cat <<EOF
+Usage: gpg-error-config [OPTIONS]
+Options:
+ [--prefix]
+ [--exec-prefix]
+ [--version]
+ [--libs]
+ [--cflags]
+EOF
+ exit $1
+}
+
+if test $# -eq 0; then
+ usage 1 1>&2
+fi
+
+while test $# -gt 0; do
+ case "$1" in
+ -*=*)
+ optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'`
+ ;;
+ *)
+ optarg=
+ ;;
+ esac
+
+ case $1 in
+ --prefix)
+ output="$output $prefix"
+ ;;
+ --exec-prefix)
+ output="$output $exec_prefix"
+ ;;
+ --version)
+ echo "@VERSION@"
+ exit 0
+ ;;
+ --cflags)
+ if test "x$includedir" != "x/usr/include" -a "x$includedir" != "x/include"; then
+ output="$output -I$includedir"
+ fi
+ # Note: -idirafter is a gcc extension. It is only used on
+ # systems where gcc is the only compiler we support.
+ for i in $isubdirafter; do
+ output="$output -idirafter ${includedir}/${i}"
+ done
+ output="$output @GPG_ERROR_CONFIG_CFLAGS@"
+ ;;
+ --libs)
+ if test "x$libdir" != "x/usr/lib" -a "x$libdir" != "x/lib"; then
+ output="$output -L$libdir"
+ fi
+ output="$output @GPG_ERROR_CONFIG_LIBS@"
+ ;;
+ *)
+ usage 1 1>&2
+ ;;
+ esac
+ shift
+done
+
+echo $output
diff --git a/libgpg-error-1.10/src/gpg-error.c b/libgpg-error-1.10/src/gpg-error.c
new file mode 100644
index 0000000..fa868ae
--- /dev/null
+++ b/libgpg-error-1.10/src/gpg-error.c
@@ -0,0 +1,454 @@
+/* gpg-error.c - Determining gpg-error error codes.
+ Copyright (C) 2004 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <limits.h>
+#include <stdio.h>
+
+#ifdef HAVE_LOCALE_H
+# include <locale.h>
+#endif
+#ifdef ENABLE_NLS
+#ifdef HAVE_W32_SYSTEM
+# include "gettext.h"
+#else
+# include <libintl.h>
+#endif
+# define _(a) gettext (a)
+# ifdef gettext_noop
+# define N_(a) gettext_noop (a)
+# else
+# define N_(a) (a)
+# endif
+#else
+# define _(a) (a)
+# define N_(a) (a)
+#endif
+
+#include <gpg-error.h>
+
+
+#if HAVE_W32_SYSTEM
+/* The implementation follows below. */
+static char *get_locale_dir (void);
+static void drop_locale_dir (char *locale_dir);
+#else
+#define get_locale_dir() LOCALEDIR
+#define drop_locale_dir(dir)
+#endif
+
+static void
+i18n_init (void)
+{
+#ifdef ENABLE_NLS
+ char *locale_dir;
+
+#ifdef HAVE_LC_MESSAGES
+ setlocale (LC_TIME, "");
+ setlocale (LC_MESSAGES, "");
+#else
+# ifndef HAVE_W32_SYSTEM
+ setlocale (LC_ALL, "" );
+# endif
+#endif
+
+ /* Note that for this program we would only need the textdomain call
+ because libgpg-error already initializes itself to its locale dir
+ (via gpg_err_init or a constructor). However this is only done
+ for the static standard locale and thus if the above setlocale
+ calls select a different locale the bindtext below will do
+ something else. */
+
+ locale_dir = get_locale_dir ();
+ if (locale_dir)
+ {
+ bindtextdomain (PACKAGE, locale_dir);
+ drop_locale_dir (locale_dir);
+ }
+ textdomain (PACKAGE);
+#endif
+}
+
+
+#ifdef HAVE_W32_SYSTEM
+
+#include <windows.h>
+
+
+static char *
+get_locale_dir (void)
+{
+ static wchar_t moddir[MAX_PATH+5];
+ char *result, *p;
+ int nbytes;
+
+ if (!GetModuleFileNameW (NULL, moddir, MAX_PATH))
+ *moddir = 0;
+
+#define SLDIR "\\share\\locale"
+ if (*moddir)
+ {
+ nbytes = WideCharToMultiByte (CP_UTF8, 0, moddir, -1, NULL, 0, NULL, NULL);
+ if (nbytes < 0)
+ return NULL;
+
+ result = malloc (nbytes + strlen (SLDIR) + 1);
+ if (result)
+ {
+ nbytes = WideCharToMultiByte (CP_UTF8, 0, moddir, -1,
+ result, nbytes, NULL, NULL);
+ if (nbytes < 0)
+ {
+ free (result);
+ result = NULL;
+ }
+ else
+ {
+ p = strrchr (result, '\\');
+ if (p)
+ *p = 0;
+ /* If we are installed below "bin" strip that part and
+ use the top directory instead. */
+ p = strrchr (result, '\\');
+ if (p && !strcmp (p+1, "bin"))
+ *p = 0;
+ /* Append the static part. */
+ strcat (result, SLDIR);
+ }
+ }
+ }
+ else /* Use the old default value. */
+ {
+ result = malloc (10 + strlen (SLDIR) + 1);
+ if (result)
+ {
+ strcpy (result, "c:\\gnupg");
+ strcat (result, SLDIR);
+ }
+ }
+#undef SLDIR
+ return result;
+}
+
+
+static void
+drop_locale_dir (char *locale_dir)
+{
+ free (locale_dir);
+}
+
+#endif /* HAVE_W32_SYSTEM */
+
+
+const char *gpg_strerror_sym (gpg_error_t err);
+const char *gpg_strsource_sym (gpg_error_t err);
+
+
+static int
+get_err_from_number (char *str, gpg_error_t *err)
+{
+ unsigned long nr;
+ char *tail;
+
+ gpg_err_set_errno (0);
+ nr = strtoul (str, &tail, 0);
+ if (errno)
+ return 0;
+
+ if (nr > UINT_MAX)
+ return 0;
+
+ if (*tail)
+ {
+ unsigned long cnr = strtoul (tail + 1, &tail, 0);
+ if (errno || *tail)
+ return 0;
+
+ if (nr >= GPG_ERR_SOURCE_DIM || cnr >= GPG_ERR_CODE_DIM)
+ return 0;
+
+ nr = gpg_err_make (nr, cnr);
+ }
+
+ *err = (unsigned int) nr;
+ return 1;
+}
+
+
+static int
+get_err_from_symbol_one (char *str, gpg_error_t *err,
+ int *have_source, int *have_code)
+{
+ static const char src_prefix[] = "GPG_ERR_SOURCE_";
+ static const char code_prefix[] = "GPG_ERR_";
+
+ if (!strncasecmp (src_prefix, str, sizeof (src_prefix) - 1))
+ {
+ gpg_err_source_t src;
+
+ if (*have_source)
+ return 0;
+ *have_source = 1;
+ str += sizeof (src_prefix) - 1;
+
+ for (src = 0; src < GPG_ERR_SOURCE_DIM; src++)
+ {
+ const char *src_sym;
+
+ src_sym = gpg_strsource_sym (src << GPG_ERR_SOURCE_SHIFT);
+ if (src_sym && !strcasecmp (str, src_sym + sizeof (src_prefix) - 1))
+ {
+ *err |= src << GPG_ERR_SOURCE_SHIFT;
+ return 1;
+ }
+ }
+ }
+ else if (!strncasecmp (code_prefix, str, sizeof (code_prefix) - 1))
+ {
+ gpg_err_code_t code;
+
+ if (*have_code)
+ return 0;
+ *have_code = 1;
+ str += sizeof (code_prefix) - 1;
+
+ for (code = 0; code < GPG_ERR_CODE_DIM; code++)
+ {
+ const char *code_sym = gpg_strerror_sym (code);
+ if (code_sym
+ && !strcasecmp (str, code_sym + sizeof (code_prefix) - 1))
+ {
+ *err |= code;
+ return 1;
+ }
+ }
+ }
+ return 0;
+}
+
+
+static int
+get_err_from_symbol (char *str, gpg_error_t *err)
+{
+ char *str2 = str;
+ int have_source = 0;
+ int have_code = 0;
+ int ret;
+ char *saved_pos = NULL;
+ char saved_char;
+
+ *err = 0;
+ while (*str2 && ((*str2 >= 'A' && *str2 <= 'Z')
+ || (*str2 >= '0' && *str2 <= '9')
+ || *str2 == '_'))
+ str2++;
+ if (*str2)
+ {
+ saved_pos = str2;
+ saved_char = *str2;
+ *str2 = '\0';
+ str2++;
+ }
+ else
+ str2 = NULL;
+
+ ret = get_err_from_symbol_one (str, err, &have_source, &have_code);
+ if (ret && str2)
+ ret = get_err_from_symbol_one (str2, err, &have_source, &have_code);
+
+ if (saved_pos)
+ *saved_pos = saved_char;
+ return ret;
+}
+
+
+static int
+get_err_from_str_one (char *str, gpg_error_t *err,
+ int *have_source, int *have_code)
+{
+ gpg_err_source_t src;
+ gpg_err_code_t code;
+
+ for (src = 0; src < GPG_ERR_SOURCE_DIM; src++)
+ {
+ const char *src_str = gpg_strsource (src << GPG_ERR_SOURCE_SHIFT);
+ if (src_str && !strcasecmp (str, src_str))
+ {
+ if (*have_source)
+ return 0;
+
+ *have_source = 1;
+ *err |= src << GPG_ERR_SOURCE_SHIFT;
+ return 1;
+ }
+ }
+
+ for (code = 0; code < GPG_ERR_CODE_DIM; code++)
+ {
+ const char *code_str = gpg_strerror (code);
+ if (code_str && !strcasecmp (str, code_str))
+ {
+ if (*have_code)
+ return 0;
+
+ *have_code = 1;
+ *err |= code;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+
+static int
+get_err_from_str (char *str, gpg_error_t *err)
+{
+ char *str2 = str;
+ int have_source = 0;
+ int have_code = 0;
+ int ret;
+ char *saved_pos = NULL;
+ char saved_char;
+
+ *err = 0;
+ ret = get_err_from_str_one (str, err, &have_source, &have_code);
+ if (ret)
+ return ret;
+
+ while (*str2 && ((*str2 >= 'A' && *str2 <= 'Z')
+ || (*str2 >= 'a' && *str2 <= 'z')
+ || (*str2 >= '0' && *str2 <= '9')
+ || *str2 == '_'))
+ str2++;
+ if (*str2)
+ {
+ saved_pos = str2;
+ saved_char = *str2;
+ *((char *) str2) = '\0';
+ str2++;
+ while (*str2 && !((*str2 >= 'A' && *str2 <= 'Z')
+ || (*str2 >= 'a' && *str2 <= 'z')
+ || (*str2 >= '0' && *str2 <= '9')
+ || *str2 == '_'))
+ str2++;
+ }
+ else
+ str2 = NULL;
+
+ ret = get_err_from_str_one (str, err, &have_source, &have_code);
+ if (ret && str2)
+ ret = get_err_from_str_one (str2, err, &have_source, &have_code);
+
+ if (saved_pos)
+ *saved_pos = saved_char;
+ return ret;
+}
+
+
+
+int
+main (int argc, char *argv[])
+{
+ int i = 1;
+ int listmode = 0;
+ const char *source_sym;
+ const char *error_sym;
+ gpg_error_t err;
+
+#ifndef GPG_ERR_INITIALIZED
+ gpg_err_init ();
+#endif
+
+ i18n_init ();
+
+
+ if (argc == 1)
+ {
+ fprintf (stderr, _("Usage: %s GPG-ERROR [...]\n"),
+ strrchr (argv[0],'/')? (strrchr (argv[0], '/')+1): argv[0]);
+ exit (1);
+ }
+ else if (argc == 2 && !strcmp (argv[1], "--version"))
+ {
+ fputs ("gpg-error (" PACKAGE_NAME ") " PACKAGE_VERSION "\n", stdout);
+ exit (0);
+ }
+ else if (argc == 2 && !strcmp (argv[1], "--list"))
+ {
+ listmode = 1;
+ }
+
+
+ if (listmode)
+ {
+ for (i=0; i < GPG_ERR_SOURCE_DIM; i++)
+ {
+ /* We use error code 1 because gpg_err_make requires a
+ non-zero error code. */
+ err = gpg_err_make (i, 1);
+ err -= 1;
+ source_sym = gpg_strsource_sym (err);
+ if (source_sym)
+ printf ("%u = (%u, -) = (%s, -) = (%s, -)\n",
+ err, gpg_err_source (err),
+ source_sym, gpg_strsource (err));
+ }
+ for (i=0; i < GPG_ERR_CODE_DIM; i++)
+ {
+ err = gpg_err_make (GPG_ERR_SOURCE_UNKNOWN, i);
+ error_sym = gpg_strerror_sym (err);
+ if (error_sym)
+ printf ("%u = (-, %u) = (-, %s) = (-, %s)\n",
+ err, gpg_err_code (err),
+ error_sym, gpg_strerror (err));
+ }
+
+ i = argc; /* Don't run the usual stuff. */
+ }
+ while (i < argc)
+ {
+ if (get_err_from_number (argv[i], &err)
+ || get_err_from_symbol (argv[i], &err)
+ || get_err_from_str (argv[i], &err))
+ {
+ source_sym = gpg_strsource_sym (err);
+ error_sym = gpg_strerror_sym (err);
+
+ printf ("%u = (%u, %u) = (%s, %s) = (%s, %s)\n",
+ err, gpg_err_source (err), gpg_err_code (err),
+ source_sym ? source_sym : "-", error_sym ? error_sym : "-",
+ gpg_strsource (err), gpg_strerror (err));
+ }
+ else
+ fprintf (stderr, _("%s: warning: could not recognize %s\n"),
+ argv[0], argv[i]);
+ i++;
+ }
+
+ exit (0);
+}
diff --git a/libgpg-error-1.10/src/gpg-error.def.in b/libgpg-error-1.10/src/gpg-error.def.in
new file mode 100644
index 0000000..cbabd57
--- /dev/null
+++ b/libgpg-error-1.10/src/gpg-error.def.in
@@ -0,0 +1,29 @@
+/* gpg-error.def.in - Exported symbols
+ * Needs to be processed by CPP.
+ */
+
+#include <config.h>
+
+EXPORTS
+ gpg_strerror @1
+ gpg_strerror_r @2
+ gpg_strsource @3
+ gpg_err_code_from_errno @4
+ gpg_err_code_to_errno @5
+ gpg_err_init @6
+ gpg_err_code_from_syserror @7
+ gpg_err_set_errno @8
+#ifdef HAVE_W32CE_SYSTEM
+ _gpg_w32ce_get_errno @9
+ _gpg_w32ce_strerror @10
+#endif
+#ifdef HAVE_W32_SYSTEM
+ _gpg_w32_bindtextdomain @11
+ _gpg_w32_textdomain @12
+ _gpg_w32_gettext @13
+ _gpg_w32_dgettext @14
+ _gpg_w32_dngettext @15
+ _gpg_w32_gettext_localename @16
+ _gpg_w32_gettext_use_utf8 @17
+#endif
+ gpg_err_deinit @18
diff --git a/libgpg-error-1.10/src/gpg-error.h b/libgpg-error-1.10/src/gpg-error.h
new file mode 100644
index 0000000..6a0f08b
--- /dev/null
+++ b/libgpg-error-1.10/src/gpg-error.h
@@ -0,0 +1,678 @@
+/* Output of mkheader.awk. DO NOT EDIT. -*- buffer-read-only: t -*- */
+
+/* gpg-error.h - Public interface to libgpg-error.
+ Copyright (C) 2003, 2004, 2010 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef GPG_ERROR_H
+#define GPG_ERROR_H 1
+
+#include <stddef.h>
+
+#ifdef __GNUC__
+#define GPG_ERR_INLINE __inline__
+#elif __STDC_VERSION__ >= 199901L
+#define GPG_ERR_INLINE inline
+#else
+#ifndef GPG_ERR_INLINE
+#define GPG_ERR_INLINE
+#endif
+#endif
+
+
+#ifdef __cplusplus
+extern "C" {
+#if 0 /* just to make Emacs auto-indent happy */
+}
+#endif
+#endif /* __cplusplus */
+
+/* The GnuPG project consists of many components. Error codes are
+ exchanged between all components. The common error codes and their
+ user-presentable descriptions are kept into a shared library to
+ allow adding new error codes and components without recompiling any
+ of the other components. The interface will not change in a
+ backward incompatible way.
+
+ An error code together with an error source build up an error
+ value. As the error value is been passed from one component to
+ another, it preserver the information about the source and nature
+ of the error.
+
+ A component of the GnuPG project can define the following macros to
+ tune the behaviour of the library:
+
+ GPG_ERR_SOURCE_DEFAULT: Define to an error source of type
+ gpg_err_source_t to make that source the default for gpg_error().
+ Otherwise GPG_ERR_SOURCE_UNKNOWN is used as default.
+
+ GPG_ERR_ENABLE_GETTEXT_MACROS: Define to provide macros to map the
+ internal gettext API to standard names. This has only an effect on
+ Windows platforms. */
+
+
+/* The error source type gpg_err_source_t.
+
+ Where as the Poo out of a welle small
+ Taketh his firste springing and his sours.
+ --Chaucer. */
+
+/* Only use free slots, never change or reorder the existing
+ entries. */
+typedef enum
+ {
+ GPG_ERR_SOURCE_UNKNOWN = 0,
+ GPG_ERR_SOURCE_GCRYPT = 1,
+ GPG_ERR_SOURCE_GPG = 2,
+ GPG_ERR_SOURCE_GPGSM = 3,
+ GPG_ERR_SOURCE_GPGAGENT = 4,
+ GPG_ERR_SOURCE_PINENTRY = 5,
+ GPG_ERR_SOURCE_SCD = 6,
+ GPG_ERR_SOURCE_GPGME = 7,
+ GPG_ERR_SOURCE_KEYBOX = 8,
+ GPG_ERR_SOURCE_KSBA = 9,
+ GPG_ERR_SOURCE_DIRMNGR = 10,
+ GPG_ERR_SOURCE_GSTI = 11,
+ GPG_ERR_SOURCE_GPA = 12,
+ GPG_ERR_SOURCE_KLEO = 13,
+ GPG_ERR_SOURCE_G13 = 14,
+ GPG_ERR_SOURCE_ANY = 31,
+ GPG_ERR_SOURCE_USER_1 = 32,
+ GPG_ERR_SOURCE_USER_2 = 33,
+ GPG_ERR_SOURCE_USER_3 = 34,
+ GPG_ERR_SOURCE_USER_4 = 35,
+
+ /* This is one more than the largest allowed entry. */
+ GPG_ERR_SOURCE_DIM = 128
+ } gpg_err_source_t;
+
+
+/* The error code type gpg_err_code_t. */
+
+/* Only use free slots, never change or reorder the existing
+ entries. */
+typedef enum
+ {
+ GPG_ERR_NO_ERROR = 0,
+ GPG_ERR_GENERAL = 1,
+ GPG_ERR_UNKNOWN_PACKET = 2,
+ GPG_ERR_UNKNOWN_VERSION = 3,
+ GPG_ERR_PUBKEY_ALGO = 4,
+ GPG_ERR_DIGEST_ALGO = 5,
+ GPG_ERR_BAD_PUBKEY = 6,
+ GPG_ERR_BAD_SECKEY = 7,
+ GPG_ERR_BAD_SIGNATURE = 8,
+ GPG_ERR_NO_PUBKEY = 9,
+ GPG_ERR_CHECKSUM = 10,
+ GPG_ERR_BAD_PASSPHRASE = 11,
+ GPG_ERR_CIPHER_ALGO = 12,
+ GPG_ERR_KEYRING_OPEN = 13,
+ GPG_ERR_INV_PACKET = 14,
+ GPG_ERR_INV_ARMOR = 15,
+ GPG_ERR_NO_USER_ID = 16,
+ GPG_ERR_NO_SECKEY = 17,
+ GPG_ERR_WRONG_SECKEY = 18,
+ GPG_ERR_BAD_KEY = 19,
+ GPG_ERR_COMPR_ALGO = 20,
+ GPG_ERR_NO_PRIME = 21,
+ GPG_ERR_NO_ENCODING_METHOD = 22,
+ GPG_ERR_NO_ENCRYPTION_SCHEME = 23,
+ GPG_ERR_NO_SIGNATURE_SCHEME = 24,
+ GPG_ERR_INV_ATTR = 25,
+ GPG_ERR_NO_VALUE = 26,
+ GPG_ERR_NOT_FOUND = 27,
+ GPG_ERR_VALUE_NOT_FOUND = 28,
+ GPG_ERR_SYNTAX = 29,
+ GPG_ERR_BAD_MPI = 30,
+ GPG_ERR_INV_PASSPHRASE = 31,
+ GPG_ERR_SIG_CLASS = 32,
+ GPG_ERR_RESOURCE_LIMIT = 33,
+ GPG_ERR_INV_KEYRING = 34,
+ GPG_ERR_TRUSTDB = 35,
+ GPG_ERR_BAD_CERT = 36,
+ GPG_ERR_INV_USER_ID = 37,
+ GPG_ERR_UNEXPECTED = 38,
+ GPG_ERR_TIME_CONFLICT = 39,
+ GPG_ERR_KEYSERVER = 40,
+ GPG_ERR_WRONG_PUBKEY_ALGO = 41,
+ GPG_ERR_TRIBUTE_TO_D_A = 42,
+ GPG_ERR_WEAK_KEY = 43,
+ GPG_ERR_INV_KEYLEN = 44,
+ GPG_ERR_INV_ARG = 45,
+ GPG_ERR_BAD_URI = 46,
+ GPG_ERR_INV_URI = 47,
+ GPG_ERR_NETWORK = 48,
+ GPG_ERR_UNKNOWN_HOST = 49,
+ GPG_ERR_SELFTEST_FAILED = 50,
+ GPG_ERR_NOT_ENCRYPTED = 51,
+ GPG_ERR_NOT_PROCESSED = 52,
+ GPG_ERR_UNUSABLE_PUBKEY = 53,
+ GPG_ERR_UNUSABLE_SECKEY = 54,
+ GPG_ERR_INV_VALUE = 55,
+ GPG_ERR_BAD_CERT_CHAIN = 56,
+ GPG_ERR_MISSING_CERT = 57,
+ GPG_ERR_NO_DATA = 58,
+ GPG_ERR_BUG = 59,
+ GPG_ERR_NOT_SUPPORTED = 60,
+ GPG_ERR_INV_OP = 61,
+ GPG_ERR_TIMEOUT = 62,
+ GPG_ERR_INTERNAL = 63,
+ GPG_ERR_EOF_GCRYPT = 64,
+ GPG_ERR_INV_OBJ = 65,
+ GPG_ERR_TOO_SHORT = 66,
+ GPG_ERR_TOO_LARGE = 67,
+ GPG_ERR_NO_OBJ = 68,
+ GPG_ERR_NOT_IMPLEMENTED = 69,
+ GPG_ERR_CONFLICT = 70,
+ GPG_ERR_INV_CIPHER_MODE = 71,
+ GPG_ERR_INV_FLAG = 72,
+ GPG_ERR_INV_HANDLE = 73,
+ GPG_ERR_TRUNCATED = 74,
+ GPG_ERR_INCOMPLETE_LINE = 75,
+ GPG_ERR_INV_RESPONSE = 76,
+ GPG_ERR_NO_AGENT = 77,
+ GPG_ERR_AGENT = 78,
+ GPG_ERR_INV_DATA = 79,
+ GPG_ERR_ASSUAN_SERVER_FAULT = 80,
+ GPG_ERR_ASSUAN = 81,
+ GPG_ERR_INV_SESSION_KEY = 82,
+ GPG_ERR_INV_SEXP = 83,
+ GPG_ERR_UNSUPPORTED_ALGORITHM = 84,
+ GPG_ERR_NO_PIN_ENTRY = 85,
+ GPG_ERR_PIN_ENTRY = 86,
+ GPG_ERR_BAD_PIN = 87,
+ GPG_ERR_INV_NAME = 88,
+ GPG_ERR_BAD_DATA = 89,
+ GPG_ERR_INV_PARAMETER = 90,
+ GPG_ERR_WRONG_CARD = 91,
+ GPG_ERR_NO_DIRMNGR = 92,
+ GPG_ERR_DIRMNGR = 93,
+ GPG_ERR_CERT_REVOKED = 94,
+ GPG_ERR_NO_CRL_KNOWN = 95,
+ GPG_ERR_CRL_TOO_OLD = 96,
+ GPG_ERR_LINE_TOO_LONG = 97,
+ GPG_ERR_NOT_TRUSTED = 98,
+ GPG_ERR_CANCELED = 99,
+ GPG_ERR_BAD_CA_CERT = 100,
+ GPG_ERR_CERT_EXPIRED = 101,
+ GPG_ERR_CERT_TOO_YOUNG = 102,
+ GPG_ERR_UNSUPPORTED_CERT = 103,
+ GPG_ERR_UNKNOWN_SEXP = 104,
+ GPG_ERR_UNSUPPORTED_PROTECTION = 105,
+ GPG_ERR_CORRUPTED_PROTECTION = 106,
+ GPG_ERR_AMBIGUOUS_NAME = 107,
+ GPG_ERR_CARD = 108,
+ GPG_ERR_CARD_RESET = 109,
+ GPG_ERR_CARD_REMOVED = 110,
+ GPG_ERR_INV_CARD = 111,
+ GPG_ERR_CARD_NOT_PRESENT = 112,
+ GPG_ERR_NO_PKCS15_APP = 113,
+ GPG_ERR_NOT_CONFIRMED = 114,
+ GPG_ERR_CONFIGURATION = 115,
+ GPG_ERR_NO_POLICY_MATCH = 116,
+ GPG_ERR_INV_INDEX = 117,
+ GPG_ERR_INV_ID = 118,
+ GPG_ERR_NO_SCDAEMON = 119,
+ GPG_ERR_SCDAEMON = 120,
+ GPG_ERR_UNSUPPORTED_PROTOCOL = 121,
+ GPG_ERR_BAD_PIN_METHOD = 122,
+ GPG_ERR_CARD_NOT_INITIALIZED = 123,
+ GPG_ERR_UNSUPPORTED_OPERATION = 124,
+ GPG_ERR_WRONG_KEY_USAGE = 125,
+ GPG_ERR_NOTHING_FOUND = 126,
+ GPG_ERR_WRONG_BLOB_TYPE = 127,
+ GPG_ERR_MISSING_VALUE = 128,
+ GPG_ERR_HARDWARE = 129,
+ GPG_ERR_PIN_BLOCKED = 130,
+ GPG_ERR_USE_CONDITIONS = 131,
+ GPG_ERR_PIN_NOT_SYNCED = 132,
+ GPG_ERR_INV_CRL = 133,
+ GPG_ERR_BAD_BER = 134,
+ GPG_ERR_INV_BER = 135,
+ GPG_ERR_ELEMENT_NOT_FOUND = 136,
+ GPG_ERR_IDENTIFIER_NOT_FOUND = 137,
+ GPG_ERR_INV_TAG = 138,
+ GPG_ERR_INV_LENGTH = 139,
+ GPG_ERR_INV_KEYINFO = 140,
+ GPG_ERR_UNEXPECTED_TAG = 141,
+ GPG_ERR_NOT_DER_ENCODED = 142,
+ GPG_ERR_NO_CMS_OBJ = 143,
+ GPG_ERR_INV_CMS_OBJ = 144,
+ GPG_ERR_UNKNOWN_CMS_OBJ = 145,
+ GPG_ERR_UNSUPPORTED_CMS_OBJ = 146,
+ GPG_ERR_UNSUPPORTED_ENCODING = 147,
+ GPG_ERR_UNSUPPORTED_CMS_VERSION = 148,
+ GPG_ERR_UNKNOWN_ALGORITHM = 149,
+ GPG_ERR_INV_ENGINE = 150,
+ GPG_ERR_PUBKEY_NOT_TRUSTED = 151,
+ GPG_ERR_DECRYPT_FAILED = 152,
+ GPG_ERR_KEY_EXPIRED = 153,
+ GPG_ERR_SIG_EXPIRED = 154,
+ GPG_ERR_ENCODING_PROBLEM = 155,
+ GPG_ERR_INV_STATE = 156,
+ GPG_ERR_DUP_VALUE = 157,
+ GPG_ERR_MISSING_ACTION = 158,
+ GPG_ERR_MODULE_NOT_FOUND = 159,
+ GPG_ERR_INV_OID_STRING = 160,
+ GPG_ERR_INV_TIME = 161,
+ GPG_ERR_INV_CRL_OBJ = 162,
+ GPG_ERR_UNSUPPORTED_CRL_VERSION = 163,
+ GPG_ERR_INV_CERT_OBJ = 164,
+ GPG_ERR_UNKNOWN_NAME = 165,
+ GPG_ERR_LOCALE_PROBLEM = 166,
+ GPG_ERR_NOT_LOCKED = 167,
+ GPG_ERR_PROTOCOL_VIOLATION = 168,
+ GPG_ERR_INV_MAC = 169,
+ GPG_ERR_INV_REQUEST = 170,
+ GPG_ERR_UNKNOWN_EXTN = 171,
+ GPG_ERR_UNKNOWN_CRIT_EXTN = 172,
+ GPG_ERR_LOCKED = 173,
+ GPG_ERR_UNKNOWN_OPTION = 174,
+ GPG_ERR_UNKNOWN_COMMAND = 175,
+ GPG_ERR_NOT_OPERATIONAL = 176,
+ GPG_ERR_NO_PASSPHRASE = 177,
+ GPG_ERR_NO_PIN = 178,
+ GPG_ERR_NOT_ENABLED = 179,
+ GPG_ERR_NO_ENGINE = 180,
+ GPG_ERR_MISSING_KEY = 181,
+ GPG_ERR_TOO_MANY = 182,
+ GPG_ERR_LIMIT_REACHED = 183,
+ GPG_ERR_NOT_INITIALIZED = 184,
+ GPG_ERR_MISSING_ISSUER_CERT = 185,
+ GPG_ERR_FULLY_CANCELED = 198,
+ GPG_ERR_UNFINISHED = 199,
+ GPG_ERR_BUFFER_TOO_SHORT = 200,
+ GPG_ERR_SEXP_INV_LEN_SPEC = 201,
+ GPG_ERR_SEXP_STRING_TOO_LONG = 202,
+ GPG_ERR_SEXP_UNMATCHED_PAREN = 203,
+ GPG_ERR_SEXP_NOT_CANONICAL = 204,
+ GPG_ERR_SEXP_BAD_CHARACTER = 205,
+ GPG_ERR_SEXP_BAD_QUOTATION = 206,
+ GPG_ERR_SEXP_ZERO_PREFIX = 207,
+ GPG_ERR_SEXP_NESTED_DH = 208,
+ GPG_ERR_SEXP_UNMATCHED_DH = 209,
+ GPG_ERR_SEXP_UNEXPECTED_PUNC = 210,
+ GPG_ERR_SEXP_BAD_HEX_CHAR = 211,
+ GPG_ERR_SEXP_ODD_HEX_NUMBERS = 212,
+ GPG_ERR_SEXP_BAD_OCT_CHAR = 213,
+ GPG_ERR_ASS_GENERAL = 257,
+ GPG_ERR_ASS_ACCEPT_FAILED = 258,
+ GPG_ERR_ASS_CONNECT_FAILED = 259,
+ GPG_ERR_ASS_INV_RESPONSE = 260,
+ GPG_ERR_ASS_INV_VALUE = 261,
+ GPG_ERR_ASS_INCOMPLETE_LINE = 262,
+ GPG_ERR_ASS_LINE_TOO_LONG = 263,
+ GPG_ERR_ASS_NESTED_COMMANDS = 264,
+ GPG_ERR_ASS_NO_DATA_CB = 265,
+ GPG_ERR_ASS_NO_INQUIRE_CB = 266,
+ GPG_ERR_ASS_NOT_A_SERVER = 267,
+ GPG_ERR_ASS_NOT_A_CLIENT = 268,
+ GPG_ERR_ASS_SERVER_START = 269,
+ GPG_ERR_ASS_READ_ERROR = 270,
+ GPG_ERR_ASS_WRITE_ERROR = 271,
+ GPG_ERR_ASS_TOO_MUCH_DATA = 273,
+ GPG_ERR_ASS_UNEXPECTED_CMD = 274,
+ GPG_ERR_ASS_UNKNOWN_CMD = 275,
+ GPG_ERR_ASS_SYNTAX = 276,
+ GPG_ERR_ASS_CANCELED = 277,
+ GPG_ERR_ASS_NO_INPUT = 278,
+ GPG_ERR_ASS_NO_OUTPUT = 279,
+ GPG_ERR_ASS_PARAMETER = 280,
+ GPG_ERR_ASS_UNKNOWN_INQUIRE = 281,
+ GPG_ERR_USER_1 = 1024,
+ GPG_ERR_USER_2 = 1025,
+ GPG_ERR_USER_3 = 1026,
+ GPG_ERR_USER_4 = 1027,
+ GPG_ERR_USER_5 = 1028,
+ GPG_ERR_USER_6 = 1029,
+ GPG_ERR_USER_7 = 1030,
+ GPG_ERR_USER_8 = 1031,
+ GPG_ERR_USER_9 = 1032,
+ GPG_ERR_USER_10 = 1033,
+ GPG_ERR_USER_11 = 1034,
+ GPG_ERR_USER_12 = 1035,
+ GPG_ERR_USER_13 = 1036,
+ GPG_ERR_USER_14 = 1037,
+ GPG_ERR_USER_15 = 1038,
+ GPG_ERR_USER_16 = 1039,
+ GPG_ERR_MISSING_ERRNO = 16381,
+ GPG_ERR_UNKNOWN_ERRNO = 16382,
+ GPG_ERR_EOF = 16383,
+
+ /* The following error codes are used to map system errors. */
+#define GPG_ERR_SYSTEM_ERROR (1 << 15)
+ GPG_ERR_E2BIG = GPG_ERR_SYSTEM_ERROR | 0,
+ GPG_ERR_EACCES = GPG_ERR_SYSTEM_ERROR | 1,
+ GPG_ERR_EADDRINUSE = GPG_ERR_SYSTEM_ERROR | 2,
+ GPG_ERR_EADDRNOTAVAIL = GPG_ERR_SYSTEM_ERROR | 3,
+ GPG_ERR_EADV = GPG_ERR_SYSTEM_ERROR | 4,
+ GPG_ERR_EAFNOSUPPORT = GPG_ERR_SYSTEM_ERROR | 5,
+ GPG_ERR_EAGAIN = GPG_ERR_SYSTEM_ERROR | 6,
+ GPG_ERR_EALREADY = GPG_ERR_SYSTEM_ERROR | 7,
+ GPG_ERR_EAUTH = GPG_ERR_SYSTEM_ERROR | 8,
+ GPG_ERR_EBACKGROUND = GPG_ERR_SYSTEM_ERROR | 9,
+ GPG_ERR_EBADE = GPG_ERR_SYSTEM_ERROR | 10,
+ GPG_ERR_EBADF = GPG_ERR_SYSTEM_ERROR | 11,
+ GPG_ERR_EBADFD = GPG_ERR_SYSTEM_ERROR | 12,
+ GPG_ERR_EBADMSG = GPG_ERR_SYSTEM_ERROR | 13,
+ GPG_ERR_EBADR = GPG_ERR_SYSTEM_ERROR | 14,
+ GPG_ERR_EBADRPC = GPG_ERR_SYSTEM_ERROR | 15,
+ GPG_ERR_EBADRQC = GPG_ERR_SYSTEM_ERROR | 16,
+ GPG_ERR_EBADSLT = GPG_ERR_SYSTEM_ERROR | 17,
+ GPG_ERR_EBFONT = GPG_ERR_SYSTEM_ERROR | 18,
+ GPG_ERR_EBUSY = GPG_ERR_SYSTEM_ERROR | 19,
+ GPG_ERR_ECANCELED = GPG_ERR_SYSTEM_ERROR | 20,
+ GPG_ERR_ECHILD = GPG_ERR_SYSTEM_ERROR | 21,
+ GPG_ERR_ECHRNG = GPG_ERR_SYSTEM_ERROR | 22,
+ GPG_ERR_ECOMM = GPG_ERR_SYSTEM_ERROR | 23,
+ GPG_ERR_ECONNABORTED = GPG_ERR_SYSTEM_ERROR | 24,
+ GPG_ERR_ECONNREFUSED = GPG_ERR_SYSTEM_ERROR | 25,
+ GPG_ERR_ECONNRESET = GPG_ERR_SYSTEM_ERROR | 26,
+ GPG_ERR_ED = GPG_ERR_SYSTEM_ERROR | 27,
+ GPG_ERR_EDEADLK = GPG_ERR_SYSTEM_ERROR | 28,
+ GPG_ERR_EDEADLOCK = GPG_ERR_SYSTEM_ERROR | 29,
+ GPG_ERR_EDESTADDRREQ = GPG_ERR_SYSTEM_ERROR | 30,
+ GPG_ERR_EDIED = GPG_ERR_SYSTEM_ERROR | 31,
+ GPG_ERR_EDOM = GPG_ERR_SYSTEM_ERROR | 32,
+ GPG_ERR_EDOTDOT = GPG_ERR_SYSTEM_ERROR | 33,
+ GPG_ERR_EDQUOT = GPG_ERR_SYSTEM_ERROR | 34,
+ GPG_ERR_EEXIST = GPG_ERR_SYSTEM_ERROR | 35,
+ GPG_ERR_EFAULT = GPG_ERR_SYSTEM_ERROR | 36,
+ GPG_ERR_EFBIG = GPG_ERR_SYSTEM_ERROR | 37,
+ GPG_ERR_EFTYPE = GPG_ERR_SYSTEM_ERROR | 38,
+ GPG_ERR_EGRATUITOUS = GPG_ERR_SYSTEM_ERROR | 39,
+ GPG_ERR_EGREGIOUS = GPG_ERR_SYSTEM_ERROR | 40,
+ GPG_ERR_EHOSTDOWN = GPG_ERR_SYSTEM_ERROR | 41,
+ GPG_ERR_EHOSTUNREACH = GPG_ERR_SYSTEM_ERROR | 42,
+ GPG_ERR_EIDRM = GPG_ERR_SYSTEM_ERROR | 43,
+ GPG_ERR_EIEIO = GPG_ERR_SYSTEM_ERROR | 44,
+ GPG_ERR_EILSEQ = GPG_ERR_SYSTEM_ERROR | 45,
+ GPG_ERR_EINPROGRESS = GPG_ERR_SYSTEM_ERROR | 46,
+ GPG_ERR_EINTR = GPG_ERR_SYSTEM_ERROR | 47,
+ GPG_ERR_EINVAL = GPG_ERR_SYSTEM_ERROR | 48,
+ GPG_ERR_EIO = GPG_ERR_SYSTEM_ERROR | 49,
+ GPG_ERR_EISCONN = GPG_ERR_SYSTEM_ERROR | 50,
+ GPG_ERR_EISDIR = GPG_ERR_SYSTEM_ERROR | 51,
+ GPG_ERR_EISNAM = GPG_ERR_SYSTEM_ERROR | 52,
+ GPG_ERR_EL2HLT = GPG_ERR_SYSTEM_ERROR | 53,
+ GPG_ERR_EL2NSYNC = GPG_ERR_SYSTEM_ERROR | 54,
+ GPG_ERR_EL3HLT = GPG_ERR_SYSTEM_ERROR | 55,
+ GPG_ERR_EL3RST = GPG_ERR_SYSTEM_ERROR | 56,
+ GPG_ERR_ELIBACC = GPG_ERR_SYSTEM_ERROR | 57,
+ GPG_ERR_ELIBBAD = GPG_ERR_SYSTEM_ERROR | 58,
+ GPG_ERR_ELIBEXEC = GPG_ERR_SYSTEM_ERROR | 59,
+ GPG_ERR_ELIBMAX = GPG_ERR_SYSTEM_ERROR | 60,
+ GPG_ERR_ELIBSCN = GPG_ERR_SYSTEM_ERROR | 61,
+ GPG_ERR_ELNRNG = GPG_ERR_SYSTEM_ERROR | 62,
+ GPG_ERR_ELOOP = GPG_ERR_SYSTEM_ERROR | 63,
+ GPG_ERR_EMEDIUMTYPE = GPG_ERR_SYSTEM_ERROR | 64,
+ GPG_ERR_EMFILE = GPG_ERR_SYSTEM_ERROR | 65,
+ GPG_ERR_EMLINK = GPG_ERR_SYSTEM_ERROR | 66,
+ GPG_ERR_EMSGSIZE = GPG_ERR_SYSTEM_ERROR | 67,
+ GPG_ERR_EMULTIHOP = GPG_ERR_SYSTEM_ERROR | 68,
+ GPG_ERR_ENAMETOOLONG = GPG_ERR_SYSTEM_ERROR | 69,
+ GPG_ERR_ENAVAIL = GPG_ERR_SYSTEM_ERROR | 70,
+ GPG_ERR_ENEEDAUTH = GPG_ERR_SYSTEM_ERROR | 71,
+ GPG_ERR_ENETDOWN = GPG_ERR_SYSTEM_ERROR | 72,
+ GPG_ERR_ENETRESET = GPG_ERR_SYSTEM_ERROR | 73,
+ GPG_ERR_ENETUNREACH = GPG_ERR_SYSTEM_ERROR | 74,
+ GPG_ERR_ENFILE = GPG_ERR_SYSTEM_ERROR | 75,
+ GPG_ERR_ENOANO = GPG_ERR_SYSTEM_ERROR | 76,
+ GPG_ERR_ENOBUFS = GPG_ERR_SYSTEM_ERROR | 77,
+ GPG_ERR_ENOCSI = GPG_ERR_SYSTEM_ERROR | 78,
+ GPG_ERR_ENODATA = GPG_ERR_SYSTEM_ERROR | 79,
+ GPG_ERR_ENODEV = GPG_ERR_SYSTEM_ERROR | 80,
+ GPG_ERR_ENOENT = GPG_ERR_SYSTEM_ERROR | 81,
+ GPG_ERR_ENOEXEC = GPG_ERR_SYSTEM_ERROR | 82,
+ GPG_ERR_ENOLCK = GPG_ERR_SYSTEM_ERROR | 83,
+ GPG_ERR_ENOLINK = GPG_ERR_SYSTEM_ERROR | 84,
+ GPG_ERR_ENOMEDIUM = GPG_ERR_SYSTEM_ERROR | 85,
+ GPG_ERR_ENOMEM = GPG_ERR_SYSTEM_ERROR | 86,
+ GPG_ERR_ENOMSG = GPG_ERR_SYSTEM_ERROR | 87,
+ GPG_ERR_ENONET = GPG_ERR_SYSTEM_ERROR | 88,
+ GPG_ERR_ENOPKG = GPG_ERR_SYSTEM_ERROR | 89,
+ GPG_ERR_ENOPROTOOPT = GPG_ERR_SYSTEM_ERROR | 90,
+ GPG_ERR_ENOSPC = GPG_ERR_SYSTEM_ERROR | 91,
+ GPG_ERR_ENOSR = GPG_ERR_SYSTEM_ERROR | 92,
+ GPG_ERR_ENOSTR = GPG_ERR_SYSTEM_ERROR | 93,
+ GPG_ERR_ENOSYS = GPG_ERR_SYSTEM_ERROR | 94,
+ GPG_ERR_ENOTBLK = GPG_ERR_SYSTEM_ERROR | 95,
+ GPG_ERR_ENOTCONN = GPG_ERR_SYSTEM_ERROR | 96,
+ GPG_ERR_ENOTDIR = GPG_ERR_SYSTEM_ERROR | 97,
+ GPG_ERR_ENOTEMPTY = GPG_ERR_SYSTEM_ERROR | 98,
+ GPG_ERR_ENOTNAM = GPG_ERR_SYSTEM_ERROR | 99,
+ GPG_ERR_ENOTSOCK = GPG_ERR_SYSTEM_ERROR | 100,
+ GPG_ERR_ENOTSUP = GPG_ERR_SYSTEM_ERROR | 101,
+ GPG_ERR_ENOTTY = GPG_ERR_SYSTEM_ERROR | 102,
+ GPG_ERR_ENOTUNIQ = GPG_ERR_SYSTEM_ERROR | 103,
+ GPG_ERR_ENXIO = GPG_ERR_SYSTEM_ERROR | 104,
+ GPG_ERR_EOPNOTSUPP = GPG_ERR_SYSTEM_ERROR | 105,
+ GPG_ERR_EOVERFLOW = GPG_ERR_SYSTEM_ERROR | 106,
+ GPG_ERR_EPERM = GPG_ERR_SYSTEM_ERROR | 107,
+ GPG_ERR_EPFNOSUPPORT = GPG_ERR_SYSTEM_ERROR | 108,
+ GPG_ERR_EPIPE = GPG_ERR_SYSTEM_ERROR | 109,
+ GPG_ERR_EPROCLIM = GPG_ERR_SYSTEM_ERROR | 110,
+ GPG_ERR_EPROCUNAVAIL = GPG_ERR_SYSTEM_ERROR | 111,
+ GPG_ERR_EPROGMISMATCH = GPG_ERR_SYSTEM_ERROR | 112,
+ GPG_ERR_EPROGUNAVAIL = GPG_ERR_SYSTEM_ERROR | 113,
+ GPG_ERR_EPROTO = GPG_ERR_SYSTEM_ERROR | 114,
+ GPG_ERR_EPROTONOSUPPORT = GPG_ERR_SYSTEM_ERROR | 115,
+ GPG_ERR_EPROTOTYPE = GPG_ERR_SYSTEM_ERROR | 116,
+ GPG_ERR_ERANGE = GPG_ERR_SYSTEM_ERROR | 117,
+ GPG_ERR_EREMCHG = GPG_ERR_SYSTEM_ERROR | 118,
+ GPG_ERR_EREMOTE = GPG_ERR_SYSTEM_ERROR | 119,
+ GPG_ERR_EREMOTEIO = GPG_ERR_SYSTEM_ERROR | 120,
+ GPG_ERR_ERESTART = GPG_ERR_SYSTEM_ERROR | 121,
+ GPG_ERR_EROFS = GPG_ERR_SYSTEM_ERROR | 122,
+ GPG_ERR_ERPCMISMATCH = GPG_ERR_SYSTEM_ERROR | 123,
+ GPG_ERR_ESHUTDOWN = GPG_ERR_SYSTEM_ERROR | 124,
+ GPG_ERR_ESOCKTNOSUPPORT = GPG_ERR_SYSTEM_ERROR | 125,
+ GPG_ERR_ESPIPE = GPG_ERR_SYSTEM_ERROR | 126,
+ GPG_ERR_ESRCH = GPG_ERR_SYSTEM_ERROR | 127,
+ GPG_ERR_ESRMNT = GPG_ERR_SYSTEM_ERROR | 128,
+ GPG_ERR_ESTALE = GPG_ERR_SYSTEM_ERROR | 129,
+ GPG_ERR_ESTRPIPE = GPG_ERR_SYSTEM_ERROR | 130,
+ GPG_ERR_ETIME = GPG_ERR_SYSTEM_ERROR | 131,
+ GPG_ERR_ETIMEDOUT = GPG_ERR_SYSTEM_ERROR | 132,
+ GPG_ERR_ETOOMANYREFS = GPG_ERR_SYSTEM_ERROR | 133,
+ GPG_ERR_ETXTBSY = GPG_ERR_SYSTEM_ERROR | 134,
+ GPG_ERR_EUCLEAN = GPG_ERR_SYSTEM_ERROR | 135,
+ GPG_ERR_EUNATCH = GPG_ERR_SYSTEM_ERROR | 136,
+ GPG_ERR_EUSERS = GPG_ERR_SYSTEM_ERROR | 137,
+ GPG_ERR_EWOULDBLOCK = GPG_ERR_SYSTEM_ERROR | 138,
+ GPG_ERR_EXDEV = GPG_ERR_SYSTEM_ERROR | 139,
+ GPG_ERR_EXFULL = GPG_ERR_SYSTEM_ERROR | 140,
+
+ /* This is one more than the largest allowed entry. */
+ GPG_ERR_CODE_DIM = 65536
+ } gpg_err_code_t;
+
+
+/* The error value type gpg_error_t. */
+
+/* We would really like to use bit-fields in a struct, but using
+ structs as return values can cause binary compatibility issues, in
+ particular if you want to do it effeciently (also see
+ -freg-struct-return option to GCC). */
+typedef unsigned int gpg_error_t;
+
+/* We use the lowest 16 bits of gpg_error_t for error codes. The 16th
+ bit indicates system errors. */
+#define GPG_ERR_CODE_MASK (GPG_ERR_CODE_DIM - 1)
+
+/* Bits 17 to 24 are reserved. */
+
+/* We use the upper 7 bits of gpg_error_t for error sources. */
+#define GPG_ERR_SOURCE_MASK (GPG_ERR_SOURCE_DIM - 1)
+#define GPG_ERR_SOURCE_SHIFT 24
+
+/* The highest bit is reserved. It shouldn't be used to prevent
+ potential negative numbers when transmitting error values as
+ text. */
+
+
+/* GCC feature test. */
+#undef _GPG_ERR_HAVE_CONSTRUCTOR
+#if __GNUC__
+#define _GPG_ERR_GCC_VERSION (__GNUC__ * 10000 \
+ + __GNUC_MINOR__ * 100 \
+ + __GNUC_PATCHLEVEL__)
+
+#if _GPG_ERR_GCC_VERSION > 30100
+#define _GPG_ERR_CONSTRUCTOR __attribute__ ((__constructor__))
+#define _GPG_ERR_HAVE_CONSTRUCTOR
+#endif
+#endif
+
+#ifndef _GPG_ERR_CONSTRUCTOR
+#define _GPG_ERR_CONSTRUCTOR
+#endif
+
+
+/* Initialization function. */
+
+/* Initialize the library. This function should be run early. */
+gpg_error_t gpg_err_init (void) _GPG_ERR_CONSTRUCTOR;
+
+/* If this is defined, the library is already initialized by the
+ constructor and does not need to be initialized explicitely. */
+#undef GPG_ERR_INITIALIZED
+#ifdef _GPG_ERR_HAVE_CONSTRUCTOR
+#define GPG_ERR_INITIALIZED 1
+#endif
+
+/* See the source on how to use the deinit function; it is usually not
+ required. */
+void gpg_err_deinit (int mode);
+
+
+/* Constructor and accessor functions. */
+
+/* Construct an error value from an error code and source. Within a
+ subsystem, use gpg_error. */
+static GPG_ERR_INLINE gpg_error_t
+gpg_err_make (gpg_err_source_t source, gpg_err_code_t code)
+{
+ return code == GPG_ERR_NO_ERROR ? GPG_ERR_NO_ERROR
+ : (((source & GPG_ERR_SOURCE_MASK) << GPG_ERR_SOURCE_SHIFT)
+ | (code & GPG_ERR_CODE_MASK));
+}
+
+
+/* The user should define GPG_ERR_SOURCE_DEFAULT before including this
+ file to specify a default source for gpg_error. */
+#ifndef GPG_ERR_SOURCE_DEFAULT
+#define GPG_ERR_SOURCE_DEFAULT GPG_ERR_SOURCE_UNKNOWN
+#endif
+
+static GPG_ERR_INLINE gpg_error_t
+gpg_error (gpg_err_code_t code)
+{
+ return gpg_err_make (GPG_ERR_SOURCE_DEFAULT, code);
+}
+
+
+/* Retrieve the error code from an error value. */
+static GPG_ERR_INLINE gpg_err_code_t
+gpg_err_code (gpg_error_t err)
+{
+ return (gpg_err_code_t) (err & GPG_ERR_CODE_MASK);
+}
+
+
+/* Retrieve the error source from an error value. */
+static GPG_ERR_INLINE gpg_err_source_t
+gpg_err_source (gpg_error_t err)
+{
+ return (gpg_err_source_t) ((err >> GPG_ERR_SOURCE_SHIFT)
+ & GPG_ERR_SOURCE_MASK);
+}
+
+
+/* String functions. */
+
+/* Return a pointer to a string containing a description of the error
+ code in the error value ERR. This function is not thread-safe. */
+const char *gpg_strerror (gpg_error_t err);
+
+/* Return the error string for ERR in the user-supplied buffer BUF of
+ size BUFLEN. This function is, in contrast to gpg_strerror,
+ thread-safe if a thread-safe strerror_r() function is provided by
+ the system. If the function succeeds, 0 is returned and BUF
+ contains the string describing the error. If the buffer was not
+ large enough, ERANGE is returned and BUF contains as much of the
+ beginning of the error string as fits into the buffer. */
+int gpg_strerror_r (gpg_error_t err, char *buf, size_t buflen);
+
+/* Return a pointer to a string containing a description of the error
+ source in the error value ERR. */
+const char *gpg_strsource (gpg_error_t err);
+
+
+/* Mapping of system errors (errno). */
+
+/* Retrieve the error code for the system error ERR. This returns
+ GPG_ERR_UNKNOWN_ERRNO if the system error is not mapped (report
+ this). */
+gpg_err_code_t gpg_err_code_from_errno (int err);
+
+
+/* Retrieve the system error for the error code CODE. This returns 0
+ if CODE is not a system error code. */
+int gpg_err_code_to_errno (gpg_err_code_t code);
+
+
+/* Retrieve the error code directly from the ERRNO variable. This
+ returns GPG_ERR_UNKNOWN_ERRNO if the system error is not mapped
+ (report this) and GPG_ERR_MISSING_ERRNO if ERRNO has the value 0. */
+gpg_err_code_t gpg_err_code_from_syserror (void);
+
+
+/* Set the ERRNO variable. This function is the preferred way to set
+ ERRNO due to peculiarities on WindowsCE. */
+void gpg_err_set_errno (int err);
+
+
+/* Self-documenting convenience functions. */
+
+static GPG_ERR_INLINE gpg_error_t
+gpg_err_make_from_errno (gpg_err_source_t source, int err)
+{
+ return gpg_err_make (source, gpg_err_code_from_errno (err));
+}
+
+
+static GPG_ERR_INLINE gpg_error_t
+gpg_error_from_errno (int err)
+{
+ return gpg_error (gpg_err_code_from_errno (err));
+}
+
+static GPG_ERR_INLINE gpg_error_t
+gpg_error_from_syserror (void)
+{
+ return gpg_error (gpg_err_code_from_syserror ());
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* GPG_ERROR_H */
diff --git a/libgpg-error-1.10/src/gpg-error.h.in b/libgpg-error-1.10/src/gpg-error.h.in
new file mode 100644
index 0000000..ae1be21
--- /dev/null
+++ b/libgpg-error-1.10/src/gpg-error.h.in
@@ -0,0 +1,274 @@
+/* gpg-error.h - Public interface to libgpg-error.
+ Copyright (C) 2003, 2004, 2010 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#ifndef GPG_ERROR_H
+#define GPG_ERROR_H 1
+
+#include <stddef.h>
+
+#ifdef __GNUC__
+#define GPG_ERR_INLINE __inline__
+#elif __STDC_VERSION__ >= 199901L
+#define GPG_ERR_INLINE inline
+#else
+#ifndef GPG_ERR_INLINE
+#define GPG_ERR_INLINE
+#endif
+#endif
+
+
+#ifdef __cplusplus
+extern "C" {
+#if 0 /* just to make Emacs auto-indent happy */
+}
+#endif
+#endif /* __cplusplus */
+
+/* The GnuPG project consists of many components. Error codes are
+ exchanged between all components. The common error codes and their
+ user-presentable descriptions are kept into a shared library to
+ allow adding new error codes and components without recompiling any
+ of the other components. The interface will not change in a
+ backward incompatible way.
+
+ An error code together with an error source build up an error
+ value. As the error value is been passed from one component to
+ another, it preserver the information about the source and nature
+ of the error.
+
+ A component of the GnuPG project can define the following macros to
+ tune the behaviour of the library:
+
+ GPG_ERR_SOURCE_DEFAULT: Define to an error source of type
+ gpg_err_source_t to make that source the default for gpg_error().
+ Otherwise GPG_ERR_SOURCE_UNKNOWN is used as default.
+
+ GPG_ERR_ENABLE_GETTEXT_MACROS: Define to provide macros to map the
+ internal gettext API to standard names. This has only an effect on
+ Windows platforms. */
+
+
+/* The error source type gpg_err_source_t.
+
+ Where as the Poo out of a welle small
+ Taketh his firste springing and his sours.
+ --Chaucer. */
+
+/* Only use free slots, never change or reorder the existing
+ entries. */
+typedef enum
+ {
+@include err-sources.h.in
+
+ /* This is one more than the largest allowed entry. */
+ GPG_ERR_SOURCE_DIM = 128
+ } gpg_err_source_t;
+
+
+/* The error code type gpg_err_code_t. */
+
+/* Only use free slots, never change or reorder the existing
+ entries. */
+typedef enum
+ {
+@include err-codes.h.in
+
+ /* The following error codes are used to map system errors. */
+#define GPG_ERR_SYSTEM_ERROR (1 << 15)
+@include errnos.in
+
+ /* This is one more than the largest allowed entry. */
+ GPG_ERR_CODE_DIM = 65536
+ } gpg_err_code_t;
+
+
+/* The error value type gpg_error_t. */
+
+/* We would really like to use bit-fields in a struct, but using
+ structs as return values can cause binary compatibility issues, in
+ particular if you want to do it effeciently (also see
+ -freg-struct-return option to GCC). */
+typedef unsigned int gpg_error_t;
+
+/* We use the lowest 16 bits of gpg_error_t for error codes. The 16th
+ bit indicates system errors. */
+#define GPG_ERR_CODE_MASK (GPG_ERR_CODE_DIM - 1)
+
+/* Bits 17 to 24 are reserved. */
+
+/* We use the upper 7 bits of gpg_error_t for error sources. */
+#define GPG_ERR_SOURCE_MASK (GPG_ERR_SOURCE_DIM - 1)
+#define GPG_ERR_SOURCE_SHIFT 24
+
+/* The highest bit is reserved. It shouldn't be used to prevent
+ potential negative numbers when transmitting error values as
+ text. */
+
+
+/* GCC feature test. */
+#undef _GPG_ERR_HAVE_CONSTRUCTOR
+#if __GNUC__
+#define _GPG_ERR_GCC_VERSION (__GNUC__ * 10000 \
+ + __GNUC_MINOR__ * 100 \
+ + __GNUC_PATCHLEVEL__)
+
+#if _GPG_ERR_GCC_VERSION > 30100
+#define _GPG_ERR_CONSTRUCTOR __attribute__ ((__constructor__))
+#define _GPG_ERR_HAVE_CONSTRUCTOR
+#endif
+#endif
+
+#ifndef _GPG_ERR_CONSTRUCTOR
+#define _GPG_ERR_CONSTRUCTOR
+#endif
+
+
+/* Initialization function. */
+
+/* Initialize the library. This function should be run early. */
+gpg_error_t gpg_err_init (void) _GPG_ERR_CONSTRUCTOR;
+
+/* If this is defined, the library is already initialized by the
+ constructor and does not need to be initialized explicitely. */
+#undef GPG_ERR_INITIALIZED
+#ifdef _GPG_ERR_HAVE_CONSTRUCTOR
+#define GPG_ERR_INITIALIZED 1
+#endif
+
+/* See the source on how to use the deinit function; it is usually not
+ required. */
+void gpg_err_deinit (int mode);
+
+
+/* Constructor and accessor functions. */
+
+/* Construct an error value from an error code and source. Within a
+ subsystem, use gpg_error. */
+static GPG_ERR_INLINE gpg_error_t
+gpg_err_make (gpg_err_source_t source, gpg_err_code_t code)
+{
+ return code == GPG_ERR_NO_ERROR ? GPG_ERR_NO_ERROR
+ : (((source & GPG_ERR_SOURCE_MASK) << GPG_ERR_SOURCE_SHIFT)
+ | (code & GPG_ERR_CODE_MASK));
+}
+
+
+/* The user should define GPG_ERR_SOURCE_DEFAULT before including this
+ file to specify a default source for gpg_error. */
+#ifndef GPG_ERR_SOURCE_DEFAULT
+#define GPG_ERR_SOURCE_DEFAULT GPG_ERR_SOURCE_UNKNOWN
+#endif
+
+static GPG_ERR_INLINE gpg_error_t
+gpg_error (gpg_err_code_t code)
+{
+ return gpg_err_make (GPG_ERR_SOURCE_DEFAULT, code);
+}
+
+
+/* Retrieve the error code from an error value. */
+static GPG_ERR_INLINE gpg_err_code_t
+gpg_err_code (gpg_error_t err)
+{
+ return (gpg_err_code_t) (err & GPG_ERR_CODE_MASK);
+}
+
+
+/* Retrieve the error source from an error value. */
+static GPG_ERR_INLINE gpg_err_source_t
+gpg_err_source (gpg_error_t err)
+{
+ return (gpg_err_source_t) ((err >> GPG_ERR_SOURCE_SHIFT)
+ & GPG_ERR_SOURCE_MASK);
+}
+
+
+/* String functions. */
+
+/* Return a pointer to a string containing a description of the error
+ code in the error value ERR. This function is not thread-safe. */
+const char *gpg_strerror (gpg_error_t err);
+
+/* Return the error string for ERR in the user-supplied buffer BUF of
+ size BUFLEN. This function is, in contrast to gpg_strerror,
+ thread-safe if a thread-safe strerror_r() function is provided by
+ the system. If the function succeeds, 0 is returned and BUF
+ contains the string describing the error. If the buffer was not
+ large enough, ERANGE is returned and BUF contains as much of the
+ beginning of the error string as fits into the buffer. */
+int gpg_strerror_r (gpg_error_t err, char *buf, size_t buflen);
+
+/* Return a pointer to a string containing a description of the error
+ source in the error value ERR. */
+const char *gpg_strsource (gpg_error_t err);
+
+
+/* Mapping of system errors (errno). */
+
+/* Retrieve the error code for the system error ERR. This returns
+ GPG_ERR_UNKNOWN_ERRNO if the system error is not mapped (report
+ this). */
+gpg_err_code_t gpg_err_code_from_errno (int err);
+
+
+/* Retrieve the system error for the error code CODE. This returns 0
+ if CODE is not a system error code. */
+int gpg_err_code_to_errno (gpg_err_code_t code);
+
+
+/* Retrieve the error code directly from the ERRNO variable. This
+ returns GPG_ERR_UNKNOWN_ERRNO if the system error is not mapped
+ (report this) and GPG_ERR_MISSING_ERRNO if ERRNO has the value 0. */
+gpg_err_code_t gpg_err_code_from_syserror (void);
+
+
+/* Set the ERRNO variable. This function is the preferred way to set
+ ERRNO due to peculiarities on WindowsCE. */
+void gpg_err_set_errno (int err);
+
+@include extra-h.in
+
+/* Self-documenting convenience functions. */
+
+static GPG_ERR_INLINE gpg_error_t
+gpg_err_make_from_errno (gpg_err_source_t source, int err)
+{
+ return gpg_err_make (source, gpg_err_code_from_errno (err));
+}
+
+
+static GPG_ERR_INLINE gpg_error_t
+gpg_error_from_errno (int err)
+{
+ return gpg_error (gpg_err_code_from_errno (err));
+}
+
+static GPG_ERR_INLINE gpg_error_t
+gpg_error_from_syserror (void)
+{
+ return gpg_error (gpg_err_code_from_syserror ());
+}
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* GPG_ERROR_H */
diff --git a/libgpg-error-1.10/src/gpg-error.m4 b/libgpg-error-1.10/src/gpg-error.m4
new file mode 100644
index 0000000..9d96d16
--- /dev/null
+++ b/libgpg-error-1.10/src/gpg-error.m4
@@ -0,0 +1,65 @@
+# gpg-error.m4 - autoconf macro to detect libgpg-error.
+# Copyright (C) 2002, 2003, 2004 g10 Code GmbH
+#
+# This file is free software; as a special exception the author gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+#
+# This file is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+dnl AM_PATH_GPG_ERROR([MINIMUM-VERSION,
+dnl [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND ]]])
+dnl Test for libgpg-error and define GPG_ERROR_CFLAGS and GPG_ERROR_LIBS
+dnl
+AC_DEFUN([AM_PATH_GPG_ERROR],
+[ AC_ARG_WITH(gpg-error-prefix,
+ AC_HELP_STRING([--with-gpg-error-prefix=PFX],
+ [prefix where GPG Error is installed (optional)]),
+ gpg_error_config_prefix="$withval", gpg_error_config_prefix="")
+ if test x$gpg_error_config_prefix != x ; then
+ if test x${GPG_ERROR_CONFIG+set} != xset ; then
+ GPG_ERROR_CONFIG=$gpg_error_config_prefix/bin/gpg-error-config
+ fi
+ fi
+
+ AC_PATH_PROG(GPG_ERROR_CONFIG, gpg-error-config, no)
+ min_gpg_error_version=ifelse([$1], ,0.0,$1)
+ AC_MSG_CHECKING(for GPG Error - version >= $min_gpg_error_version)
+ ok=no
+ if test "$GPG_ERROR_CONFIG" != "no" ; then
+ req_major=`echo $min_gpg_error_version | \
+ sed 's/\([[0-9]]*\)\.\([[0-9]]*\)/\1/'`
+ req_minor=`echo $min_gpg_error_version | \
+ sed 's/\([[0-9]]*\)\.\([[0-9]]*\)/\2/'`
+ gpg_error_config_version=`$GPG_ERROR_CONFIG $gpg_error_config_args --version`
+ major=`echo $gpg_error_config_version | \
+ sed 's/\([[0-9]]*\)\.\([[0-9]]*\).*/\1/'`
+ minor=`echo $gpg_error_config_version | \
+ sed 's/\([[0-9]]*\)\.\([[0-9]]*\).*/\2/'`
+ if test "$major" -gt "$req_major"; then
+ ok=yes
+ else
+ if test "$major" -eq "$req_major"; then
+ if test "$minor" -ge "$req_minor"; then
+ ok=yes
+ fi
+ fi
+ fi
+ fi
+ if test $ok = yes; then
+ GPG_ERROR_CFLAGS=`$GPG_ERROR_CONFIG $gpg_error_config_args --cflags`
+ GPG_ERROR_LIBS=`$GPG_ERROR_CONFIG $gpg_error_config_args --libs`
+ AC_MSG_RESULT([yes ($gpg_error_config_version)])
+ ifelse([$2], , :, [$2])
+ else
+ GPG_ERROR_CFLAGS=""
+ GPG_ERROR_LIBS=""
+ AC_MSG_RESULT(no)
+ ifelse([$3], , :, [$3])
+ fi
+ AC_SUBST(GPG_ERROR_CFLAGS)
+ AC_SUBST(GPG_ERROR_LIBS)
+])
+
diff --git a/libgpg-error-1.10/src/init.c b/libgpg-error-1.10/src/init.c
new file mode 100644
index 0000000..91abcb0
--- /dev/null
+++ b/libgpg-error-1.10/src/init.c
@@ -0,0 +1,425 @@
+/* init.c - Initialize the GnuPG error library.
+ Copyright (C) 2005, 2010 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+
+#include <gpg-error.h>
+
+#include "gettext.h"
+#include "init.h"
+
+#ifdef HAVE_W32CE_SYSTEM
+# include "mkw32errmap.map.c" /* Generated map_w32codes () */
+#endif
+
+
+/* Locale directory support. */
+
+#if HAVE_W32_SYSTEM
+
+#include <windows.h>
+
+static int tls_index = TLS_OUT_OF_INDEXES; /* Index for the TLS functions. */
+
+static char *get_locale_dir (void);
+static void drop_locale_dir (char *locale_dir);
+
+#else /*!HAVE_W32_SYSTEM*/
+
+#define get_locale_dir() LOCALEDIR
+#define drop_locale_dir(dir)
+
+#endif /*!HAVE_W32_SYSTEM*/
+
+
+static void
+real_init (void)
+{
+#ifdef ENABLE_NLS
+ char *locale_dir;
+
+ /* We only have to bind our locale directory to our text domain. */
+ locale_dir = get_locale_dir ();
+ if (locale_dir)
+ {
+ bindtextdomain (PACKAGE, locale_dir);
+ drop_locale_dir (locale_dir);
+ }
+#endif
+}
+
+/* Initialize the library. This function should be run early. */
+gpg_error_t
+gpg_err_init (void)
+{
+#ifdef HAVE_W32_SYSTEM
+# ifdef DLL_EXPORT
+ /* We always have a constructor and thus this function is called
+ automatically. Due to the way the C init code of mingw works,
+ the constructors are called before our DllMain function is
+ called. The problem with that is that the TLS has not been setup
+ and w32-gettext.c requires TLS. To solve this we do nothing here
+ but call the actual init code from our DllMain. */
+# else /*!DLL_EXPORT*/
+ /* Note that if the TLS is actually used, we can't release the TLS
+ as there is no way to know when a thread terminates (i.e. no
+ thread-specific-atexit). You are really better off to use the
+ DLL! */
+ if (tls_index == TLS_OUT_OF_INDEXES)
+ {
+ tls_index = TlsAlloc ();
+ if (tls_index == TLS_OUT_OF_INDEXES)
+ {
+ /* No way to continue - commit suicide. */
+ abort ();
+ }
+ _gpg_w32__init_gettext_module ();
+ real_init ();
+ }
+# endif /*!DLL_EXPORT*/
+#else
+ real_init ();
+#endif
+ return 0;
+}
+
+
+/* Deinitialize libgpg-error. This function is only used in special
+ circumstances. No gpg-error function should be used after this
+ function has been called. A value of 0 passed for MODE
+ deinitializes the entire libgpg-error, a value of 1 releases
+ resources allocated for the current thread and only that thread may
+ not anymore access libgpg-error after such a call. Under Windows
+ this function may be called from the DllMain function of a DLL
+ which statically links to libgpg-error. */
+void
+gpg_err_deinit (int mode)
+{
+#if defined (HAVE_W32_SYSTEM) && !defined(DLL_EXPORT)
+ struct tls_space_s *tls;
+
+ tls = TlsGetValue (tls_index);
+ if (tls)
+ {
+ TlsSetValue (tls_index, NULL);
+ LocalFree (tls);
+ }
+
+ if (mode == 0)
+ {
+ TlsFree (tls_index);
+ tls_index = TLS_OUT_OF_INDEXES;
+ }
+#else
+ (void)mode;
+#endif
+}
+
+
+
+#ifdef HAVE_W32_SYSTEM
+
+/* Return a malloced string encoded in UTF-8 from the wide char input
+ string STRING. Caller must free this value. Returns NULL on
+ failure. Caller may use GetLastError to get the actual error
+ number. The result of calling this function with STRING set to
+ NULL is not defined. */
+static char *
+wchar_to_utf8 (const wchar_t *string)
+{
+ int n;
+ char *result;
+
+ /* Note, that CP_UTF8 is not defined in Windows versions earlier
+ than NT. */
+ n = WideCharToMultiByte (CP_UTF8, 0, string, -1, NULL, 0, NULL, NULL);
+ if (n < 0)
+ return NULL;
+
+ result = malloc (n+1);
+ if (result)
+ {
+ n = WideCharToMultiByte (CP_UTF8, 0, string, -1, result, n, NULL, NULL);
+ if (n < 0)
+ {
+ free (result);
+ result = NULL;
+ }
+ }
+ return result;
+}
+
+
+/* Return a malloced wide char string from an UTF-8 encoded input
+ string STRING. Caller must free this value. Returns NULL on
+ failure. Caller may use GetLastError to get the actual error
+ number. The result of calling this function with STRING set to
+ NULL is not defined. */
+static wchar_t *
+utf8_to_wchar (const char *string)
+{
+ int n;
+ wchar_t *result;
+
+ n = MultiByteToWideChar (CP_UTF8, 0, string, -1, NULL, 0);
+ if (n < 0)
+ return NULL;
+
+ result = malloc ((n+1) * sizeof *result);
+ if (result)
+ {
+ n = MultiByteToWideChar (CP_UTF8, 0, string, -1, result, n);
+ if (n < 0)
+ {
+ free (result);
+ result = NULL;
+ }
+ return NULL;
+ }
+ return result;
+}
+
+
+static char *
+get_locale_dir (void)
+{
+ static wchar_t moddir[MAX_PATH+5];
+ char *result, *p;
+ int nbytes;
+
+ if (!GetModuleFileNameW (NULL, moddir, MAX_PATH))
+ *moddir = 0;
+
+#define SLDIR "\\share\\locale"
+ if (*moddir)
+ {
+ nbytes = WideCharToMultiByte (CP_UTF8, 0, moddir, -1, NULL, 0, NULL, NULL);
+ if (nbytes < 0)
+ return NULL;
+
+ result = malloc (nbytes + strlen (SLDIR) + 1);
+ if (result)
+ {
+ nbytes = WideCharToMultiByte (CP_UTF8, 0, moddir, -1,
+ result, nbytes, NULL, NULL);
+ if (nbytes < 0)
+ {
+ free (result);
+ result = NULL;
+ }
+ else
+ {
+ p = strrchr (result, '\\');
+ if (p)
+ *p = 0;
+ /* If we are installed below "bin" strip that part and
+ use the top directory instead.
+
+ Background: Under Windows we don't install GnuPG
+ below bin/ but in the top directory with only share/,
+ lib/, and etc/ below it. One of the reasons is to
+ keep the the length of the filenames at bay so not to
+ increase the limited length of the PATH envvar.
+ Another and more important reason, however, is that
+ the very first GPG versions on W32 were installed
+ into a flat directory structure and for best
+ compatibility with these versions we didn't changed
+ that later. For WindowsCE we can right away install
+ it under bin, though. The hack with detection of the
+ bin directory part allows us to eventually migrate to
+ such a directory layout under plain Windows without
+ the need to change libgpg-error. */
+ p = strrchr (result, '\\');
+ if (p && !strcmp (p+1, "bin"))
+ *p = 0;
+ /* Append the static part. */
+ strcat (result, SLDIR);
+ }
+ }
+ }
+ else /* Use the old default value. */
+ {
+ result = malloc (10 + strlen (SLDIR) + 1);
+ if (result)
+ {
+ strcpy (result, "c:\\gnupg");
+ strcat (result, SLDIR);
+ }
+ }
+#undef SLDIR
+ return result;
+}
+
+
+static void
+drop_locale_dir (char *locale_dir)
+{
+ free (locale_dir);
+}
+
+
+/* Return the tls object. This function is guaranteed to return a
+ valid non-NULL object. */
+struct tls_space_s *
+get_tls (void)
+{
+ struct tls_space_s *tls;
+
+ tls = TlsGetValue (tls_index);
+ if (!tls)
+ {
+ /* Called by a thread which existed before this DLL was loaded.
+ Allocate the space. */
+ tls = LocalAlloc (LPTR, sizeof *tls);
+ if (!tls)
+ {
+ /* No way to continue - commit suicide. */
+ abort ();
+ }
+ tls->gt_use_utf8 = 0;
+ TlsSetValue (tls_index, tls);
+ }
+
+ return tls;
+}
+
+
+/* Return the value of the ERRNO variable. This needs to be a
+ function so that we can have a per-thread ERRNO. This is used only
+ on WindowsCE because that OS misses an errno. */
+#ifdef HAVE_W32CE_SYSTEM
+int
+_gpg_w32ce_get_errno (void)
+{
+ return map_w32codes ( GetLastError () );
+}
+#endif /*HAVE_W32CE_SYSTEM*/
+
+
+/* Replacement strerror function for WindowsCE. */
+#ifdef HAVE_W32CE_SYSTEM
+char *
+_gpg_w32ce_strerror (int err)
+{
+ struct tls_space_s *tls = get_tls ();
+ wchar_t tmpbuf[STRBUFFER_SIZE];
+ int n;
+
+ if (err == -1)
+ err = _gpg_w32ce_get_errno ();
+
+ /* Note: On a German HTC Touch Pro2 device I also tried
+ LOCALE_USER_DEFAULT and LOCALE_SYSTEM_DEFAULT - both returned
+ English messages. */
+ if (FormatMessageW (FORMAT_MESSAGE_FROM_SYSTEM, NULL, err,
+ MAKELANGID (LANG_NEUTRAL, SUBLANG_DEFAULT),
+ tmpbuf, STRBUFFER_SIZE -1,
+ NULL))
+ {
+ n = WideCharToMultiByte (CP_UTF8, 0, tmpbuf, -1,
+ tls->strerror_buffer,
+ sizeof tls->strerror_buffer -1,
+ NULL, NULL);
+ }
+ else
+ n = -1;
+
+ if (n < 0)
+ snprintf (tls->strerror_buffer, sizeof tls->strerror_buffer -1,
+ "[w32err=%d]", err);
+ return tls->strerror_buffer;
+}
+#endif /*HAVE_W32CE_SYSTEM*/
+
+
+void
+gpg_err_set_errno (int err)
+{
+#ifdef HAVE_W32CE_SYSTEM
+ SetLastError (err);
+#else /*!HAVE_W32CE_SYSTEM*/
+ errno = err;
+#endif /*!HAVE_W32CE_SYSTEM*/
+}
+
+
+/* Entry point called by the DLL loader. */
+#ifdef DLL_EXPORT
+int WINAPI
+DllMain (HINSTANCE hinst, DWORD reason, LPVOID reserved)
+{
+ struct tls_space_s *tls;
+ (void)reserved;
+
+ switch (reason)
+ {
+ case DLL_PROCESS_ATTACH:
+ tls_index = TlsAlloc ();
+ if (tls_index == TLS_OUT_OF_INDEXES)
+ return FALSE;
+ /* falltru. */
+ case DLL_THREAD_ATTACH:
+ tls = LocalAlloc (LPTR, sizeof *tls);
+ if (!tls)
+ return FALSE;
+ tls->gt_use_utf8 = 0;
+ TlsSetValue (tls_index, tls);
+ if (reason == DLL_PROCESS_ATTACH)
+ {
+ real_init ();
+ }
+ break;
+
+ case DLL_THREAD_DETACH:
+ tls = TlsGetValue (tls_index);
+ if (tls)
+ LocalFree (tls);
+ break;
+
+ case DLL_PROCESS_DETACH:
+ tls = TlsGetValue (tls_index);
+ if (tls)
+ LocalFree (tls);
+ TlsFree (tls_index);
+ break;
+
+ default:
+ break;
+ }
+
+ return TRUE;
+}
+#endif /*DLL_EXPORT*/
+
+#else /*!HAVE_W32_SYSTEM*/
+
+void
+gpg_err_set_errno (int err)
+{
+ errno = err;
+}
+
+#endif /*!HAVE_W32_SYSTEM*/
diff --git a/libgpg-error-1.10/src/init.h b/libgpg-error-1.10/src/init.h
new file mode 100644
index 0000000..0a31fd7
--- /dev/null
+++ b/libgpg-error-1.10/src/init.h
@@ -0,0 +1,70 @@
+/* init.h - Declarations for init.c
+ Copyright (C) 2010 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef INIT_H
+#define INIT_H
+
+#if HAVE_W32_SYSTEM
+
+/* Forward declaration - defined in w32-gettext.c. */
+struct loaded_domain;
+
+/* An item for a linked list of loaded domains. */
+struct domainlist_s
+{
+ struct domainlist_s *next;
+ char *dname; /* Directory name for the mo file. */
+ char *fname; /* File name for the MO file. */
+ int load_failed; /* True if loading the domain failed. */
+ struct loaded_domain *domain; /* NULL if not loaded. Never changed
+ once set to non-NULL. */
+ char name[1]; /* Name of the domain. Never changed
+ once set. */
+};
+
+
+
+/* 119 bytes for an error message should be enough. With this size we
+ can assume that the allocation does not take up more than 128 bytes
+ per thread. Note that this is only used for W32CE. */
+#define STRBUFFER_SIZE 120
+
+/* The TLS space definition. */
+struct tls_space_s
+{
+ /* Flag used by w32-gettext. */
+ int gt_use_utf8;
+
+#ifdef HAVE_W32CE_SYSTEM
+ char strerror_buffer[STRBUFFER_SIZE];
+#endif
+};
+
+/* Return the TLS. */
+struct tls_space_s *get_tls (void);
+
+
+/* Explicit constructor for w32-gettext.c */
+#ifndef DLL_EXPORT
+void _gpg_w32__init_gettext_module (void);
+#endif
+
+#endif /*HAVE_W32_SYSTEM*/
+
+#endif /*INIT_H*/
diff --git a/libgpg-error-1.10/src/mkerrcodes.awk b/libgpg-error-1.10/src/mkerrcodes.awk
new file mode 100644
index 0000000..46d436c
--- /dev/null
+++ b/libgpg-error-1.10/src/mkerrcodes.awk
@@ -0,0 +1,99 @@
+# mkerrcodes.awk
+# Copyright (C) 2004, 2005 g10 Code GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+#
+# As a special exception, g10 Code GmbH gives unlimited permission to
+# copy, distribute and modify the C source files that are the output
+# of mkerrcodes.awk. You need not follow the terms of the GNU General
+# Public License when using or distributing such scripts, even though
+# portions of the text of mkerrcodes.awk appear in them. The GNU
+# General Public License (GPL) does govern all other use of the material
+# that constitutes the mkerrcodes.awk program.
+#
+# Certain portions of the mkerrcodes.awk source text are designed to be
+# copied (in certain cases, depending on the input) into the output of
+# mkerrcodes.awk. We call these the "data" portions. The rest of the
+# mkerrcodes.awk source text consists of comments plus executable code
+# that decides which of the data portions to output in any given case.
+# We call these comments and executable code the "non-data" portions.
+# mkerrcodes.h never copies any of the non-data portions into its output.
+#
+# This special exception to the GPL applies to versions of mkerrcodes.awk
+# released by g10 Code GmbH. When you make and distribute a modified version
+# of mkerrcodes.awk, you may extend this special exception to the GPL to
+# apply to your modified version as well, *unless* your modified version
+# has the potential to copy into its output some of the text that was the
+# non-data portion of the version that you started with. (In other words,
+# unless your change moves or copies text from the non-data portions to the
+# data portions.) If your modification has such potential, you must delete
+# any notice of this special exception to the GPL from your modified version.
+
+# This script outputs an intermediate file that contains the following output:
+# static struct
+# {
+# int err;
+# const char *err_sym;
+# } err_table[] =
+# {
+# { 7, "GPG_ERR_E2BIG" },
+# [...]
+# };
+#
+# The input file is a list of possible system errors, followed by a GPG_ERR_* name:
+#
+# 7 GPG_ERR_E2BIG
+#
+# Comments (starting with # and ending at the end of the line) are removed,
+# as is trailing whitespace.
+
+BEGIN {
+ FS="[ \t]+GPG_ERR_";
+ print "/* Output of mkerrcodes.awk. DO NOT EDIT. */";
+ print "";
+ header = 1;
+}
+
+/^#/ { next; }
+
+header {
+ if (! /^[ \t]*$/)
+ {
+ header = 0;
+
+ print "static struct";
+ print " {";
+ print " int err;";
+ print " const char *err_sym;";
+ print " } err_table[] = ";
+ print "{";
+ }
+ else
+ print;
+}
+
+!header {
+ sub (/\#.+/, "");
+ sub (/[ ]+$/, ""); # Strip trailing space and tab characters.
+
+ if (/^$/)
+ next;
+
+ print " { " $1 ", \"GPG_ERR_" $2 "\" },";
+}
+
+END {
+ print "};";
+}
diff --git a/libgpg-error-1.10/src/mkerrcodes.c b/libgpg-error-1.10/src/mkerrcodes.c
new file mode 100644
index 0000000..29c1cc2
--- /dev/null
+++ b/libgpg-error-1.10/src/mkerrcodes.c
@@ -0,0 +1,78 @@
+/* mkerrcodes.c - Generate list of system error values.
+ Copyright (C) 2004 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+/* This file must not include config.h, as that is for the host
+ system, while this file will be run on the build system. */
+
+#include <stdio.h>
+
+#include "mkerrcodes.h"
+
+static const char header[] =
+"/* errnos.h - List of system error values.\n"
+" Copyright (C) 2004 g10 Code GmbH\n"
+" This file is part of libgpg-error.\n"
+"\n"
+" libgpg-error is free software; you can redistribute it and/or\n"
+" modify it under the terms of the GNU Lesser General Public License\n"
+" as published by the Free Software Foundation; either version 2.1 of\n"
+" the License, or (at your option) any later version.\n"
+"\n"
+" libgpg-error is distributed in the hope that it will be useful, but\n"
+" WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU\n"
+" Lesser General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU Lesser General Public\n"
+" License along with libgpg-error; if not, write to the Free\n"
+" Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA\n"
+" 02111-1307, USA. */\n"
+"\n";
+
+int
+main (int argc, char **argv)
+{
+ int sorted;
+ int i;
+
+ printf ("%s", header);
+ do
+ {
+ sorted = 1;
+ for (i = 0; i < sizeof (err_table) / sizeof (err_table[0]) - 1; i++)
+ if (err_table[i].err > err_table[i + 1].err)
+ {
+ int err = err_table[i].err;
+ const char *err_sym = err_table[i].err_sym;
+
+ err_table[i].err = err_table[i + 1].err;
+ err_table[i].err_sym = err_table[i + 1].err_sym;
+ err_table[i + 1].err = err;
+ err_table[i + 1].err_sym = err_sym;
+ sorted = 0;
+ }
+ }
+ while (!sorted);
+
+ for (i = 0; i < sizeof (err_table) / sizeof (err_table[0]); i++)
+ printf ("%i\t%s\n", err_table[i].err, err_table[i].err_sym);
+
+ return 0;
+}
diff --git a/libgpg-error-1.10/src/mkerrcodes1.awk b/libgpg-error-1.10/src/mkerrcodes1.awk
new file mode 100644
index 0000000..a771a73
--- /dev/null
+++ b/libgpg-error-1.10/src/mkerrcodes1.awk
@@ -0,0 +1,96 @@
+# mkerrcodes.awk
+# Copyright (C) 2003, 2004 g10 Code GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+#
+# As a special exception, g10 Code GmbH gives unlimited permission to
+# copy, distribute and modify the C source files that are the output
+# of mkerrcodes.awk. You need not follow the terms of the GNU General
+# Public License when using or distributing such scripts, even though
+# portions of the text of mkerrcodes.awk appear in them. The GNU
+# General Public License (GPL) does govern all other use of the material
+# that constitutes the mkerrcodes.awk program.
+#
+# Certain portions of the mkerrcodes.awk source text are designed to be
+# copied (in certain cases, depending on the input) into the output of
+# mkerrcodes.awk. We call these the "data" portions. The rest of the
+# mkerrcodes.awk source text consists of comments plus executable code
+# that decides which of the data portions to output in any given case.
+# We call these comments and executable code the "non-data" portions.
+# mkerrcodes.h never copies any of the non-data portions into its output.
+#
+# This special exception to the GPL applies to versions of mkerrcodes.awk
+# released by g10 Code GmbH. When you make and distribute a modified version
+# of mkerrcodes.awk, you may extend this special exception to the GPL to
+# apply to your modified version as well, *unless* your modified version
+# has the potential to copy into its output some of the text that was the
+# non-data portion of the version that you started with. (In other words,
+# unless your change moves or copies text from the non-data portions to the
+# data portions.) If your modification has such potential, you must delete
+# any notice of this special exception to the GPL from your modified version.
+
+# This script outputs an intermediate file that contains the following block
+# for each error value symbol in the input file (example for EINVAL):
+#
+# #ifdef EINVAL
+# EINVAL GPG_ERR_EINVAL
+# #endif
+#
+# The input file is a list of possible system errors in the column errnoidx
+# (defaults to 2).
+#
+# Comments (starting with # and ending at the end of the line) are removed,
+# as is trailing whitespace.
+
+BEGIN {
+ FS="[\t]+";
+ header = 1;
+ if (errnoidx == 0)
+ errnoidx = 2;
+
+ print "/* Output of mkerrcodes.awk. DO NOT EDIT. */";
+ print "";
+}
+
+/^#/ { next; }
+
+header {
+ if ($1 ~ /^[0-9]/)
+ {
+ print "#include <errno.h>";
+ print "#ifdef _WIN32";
+ print "#include <winsock2.h>";
+ print "#endif";
+ print "";
+ header = 0;
+ }
+ else
+ print;
+}
+
+!header {
+ sub (/\#.+/, "");
+ sub (/[ ]+$/, ""); # Strip trailing space and tab characters.
+
+ if (/^$/)
+ next;
+
+ print "#ifdef " $errnoidx;
+ print $errnoidx "\tGPG_ERR_" $errnoidx;
+ print "#endif";
+ print "#ifdef WSA" $errnoidx;
+ print "WSA" $errnoidx "\tGPG_ERR_" $errnoidx;
+ print "#endif";
+}
diff --git a/libgpg-error-1.10/src/mkerrcodes2.awk b/libgpg-error-1.10/src/mkerrcodes2.awk
new file mode 100644
index 0000000..ea58503
--- /dev/null
+++ b/libgpg-error-1.10/src/mkerrcodes2.awk
@@ -0,0 +1,134 @@
+# mkstrtable.awk
+# Copyright (C) 2003 g10 Code GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+#
+# As a special exception, g10 Code GmbH gives unlimited permission to
+# copy, distribute and modify the C source files that are the output
+# of mkerrcodes2.awk. You need not follow the terms of the GNU General
+# Public License when using or distributing such scripts, even though
+# portions of the text of mkerrcodes2.awk appear in them. The GNU
+# General Public License (GPL) does govern all other use of the material
+# that constitutes the mkerrcodes2.awk program.
+#
+# Certain portions of the mkerrcodes2.awk source text are designed to be
+# copied (in certain cases, depending on the input) into the output of
+# mkerrcodes2.awk. We call these the "data" portions. The rest of the
+# mkerrcodes2.awk source text consists of comments plus executable code
+# that decides which of the data portions to output in any given case.
+# We call these comments and executable code the "non-data" portions.
+# mkstrtable.h never copies any of the non-data portions into its output.
+#
+# This special exception to the GPL applies to versions of mkerrcodes2.awk
+# released by g10 Code GmbH. When you make and distribute a modified version
+# of mkerrcodes2.awk, you may extend this special exception to the GPL to
+# apply to your modified version as well, *unless* your modified version
+# has the potential to copy into its output some of the text that was the
+# non-data portion of the version that you started with. (In other words,
+# unless your change moves or copies text from the non-data portions to the
+# data portions.) If your modification has such potential, you must delete
+# any notice of this special exception to the GPL from your modified version.
+
+# This script outputs a source file that does define the following
+# symbols:
+#
+# static const char msgstr[];
+# A string containing all messages in the list.
+#
+# static const int msgidx[];
+# A list of index numbers, one for each message, that points to the
+# beginning of the string in msgstr.
+#
+# msgidxof (code);
+# A macro that maps code numbers to idx numbers. If a DEFAULT MESSAGE
+# is provided (see below), its index will be returned for unknown codes.
+# Otherwise -1 is returned for codes that do not appear in the list.
+# You can lookup the message with code CODE with:
+# msgstr + msgidx[msgidxof (code)].
+#
+# The input file has the following format:
+# CODE1 MESSAGE1 (Code number, <tab>, message string)
+# CODE2 MESSAGE2 (Code number, <tab>, message string)
+# ...
+# CODEn MESSAGEn (Code number, <tab>, message string)
+# DEFAULT MESSAGE (<tab>, fall-back message string)
+#
+# Comments (starting with # and ending at the end of the line) are removed,
+# as is trailing whitespace. The last line is optional; if no DEFAULT
+# MESSAGE is given, msgidxof will return the number -1 for unknown
+# index numbers.
+
+BEGIN {
+# msg holds the number of messages.
+ msg = 0;
+ print "/* Output of mkerrcodes2.awk. DO NOT EDIT. */";
+ print "";
+ header = 1;
+}
+
+/^#/ { next; }
+
+header {
+ if ($1 ~ /^[0123456789]+$/)
+ {
+ print "static const int err_code_from_index[] = {";
+ header = 0;
+ }
+ else
+ print;
+}
+
+!header {
+ sub (/\#.+/, "");
+ sub (/[ ]+$/, ""); # Strip trailing space and tab characters.
+
+ if (/^$/)
+ next;
+
+# Print the string msgstr line by line. We delay output by one line to be able
+# to treat the last line differently (see END).
+ print " " $2 ",";
+
+# Remember the error value and index of each error code.
+ code[msg] = $1;
+ pos[msg] = $2;
+ msg++;
+}
+END {
+ print "};";
+ print "";
+ print "#define errno_to_idx(code) (0 ? -1 \\";
+
+# Gather the ranges.
+ skip = code[0];
+ start = code[0];
+ stop = code[0];
+ for (i = 1; i < msg; i++)
+ {
+ if (code[i] == stop + 1)
+ stop++;
+ else
+ {
+ print " : ((code >= " start ") && (code <= " stop ")) ? (code - " \
+ skip ") \\";
+ skip += code[i] - stop - 1;
+ start = code[i];
+ stop = code[i];
+ }
+ }
+ print " : ((code >= " start ") && (code <= " stop ")) ? (code - " \
+ skip ") \\";
+ print " : -1)";
+}
diff --git a/libgpg-error-1.10/src/mkerrnos.awk b/libgpg-error-1.10/src/mkerrnos.awk
new file mode 100644
index 0000000..f79df66
--- /dev/null
+++ b/libgpg-error-1.10/src/mkerrnos.awk
@@ -0,0 +1,104 @@
+# mkerrnos.awk
+# Copyright (C) 2003, 2004 g10 Code GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+#
+# As a special exception, g10 Code GmbH gives unlimited permission to
+# copy, distribute and modify the C source files that are the output
+# of mkerrnos.awk. You need not follow the terms of the GNU General
+# Public License when using or distributing such scripts, even though
+# portions of the text of mkerrnos.awk appear in them. The GNU
+# General Public License (GPL) does govern all other use of the material
+# that constitutes the mkerrnos.awk program.
+#
+# Certain portions of the mkerrnos.awk source text are designed to be
+# copied (in certain cases, depending on the input) into the output of
+# mkerrnos.awk. We call these the "data" portions. The rest of the
+# mkerrnos.awk source text consists of comments plus executable code
+# that decides which of the data portions to output in any given case.
+# We call these comments and executable code the "non-data" portions.
+# mkerrnos.h never copies any of the non-data portions into its output.
+#
+# This special exception to the GPL applies to versions of mkerrnos.awk
+# released by g10 Code GmbH. When you make and distribute a modified version
+# of mkerrnos.awk, you may extend this special exception to the GPL to
+# apply to your modified version as well, *unless* your modified version
+# has the potential to copy into its output some of the text that was the
+# non-data portion of the version that you started with. (In other words,
+# unless your change moves or copies text from the non-data portions to the
+# data portions.) If your modification has such potential, you must delete
+# any notice of this special exception to the GPL from your modified version.
+
+# This script outputs a source file that does define the following
+# symbols:
+#
+# static const int err_code_to_errno[];
+# A mapping of gpg_err_code_t numbers to system errno. The index of an
+# error code in the table can be obtained after removing the system error
+# code indication bit.
+#
+# The input file is a list of possible system errors in the column errnoidx
+# (defaults to 2).
+#
+# Comments (starting with # and ending at the end of the line) are removed,
+# as is trailing whitespace.
+
+BEGIN {
+ FS="[\t]+";
+ header = 1;
+ if (errnoidx == 0)
+ errnoidx = 2;
+
+ print "/* Output of mkerrnos.awk. DO NOT EDIT. */";
+ print "";
+}
+
+/^#/ { next; }
+
+header {
+ if ($1 ~ /^[0-9]/)
+ {
+ print "#include <errno.h>";
+ print "#ifdef _WIN32";
+ print "#include <winsock2.h>";
+ print "#endif";
+ print "";
+ print "static const int err_code_to_errno [] = {";
+ header = 0;
+ }
+ else
+ print;
+}
+
+!header {
+ sub (/\#.+/, "");
+ sub (/[ ]+$/, ""); # Strip trailing space and tab characters.
+
+ if (/^$/)
+ next;
+
+ print "#ifdef " $errnoidx;
+ print " " $errnoidx ",";
+ print "#else";
+ print "#ifdef WSA" $errnoidx;
+ print " WSA" $errnoidx ",";
+ print "#else";
+ print " 0,";
+ print "#endif";
+ print "#endif";
+}
+END {
+ print "};";
+}
diff --git a/libgpg-error-1.10/src/mkheader.awk b/libgpg-error-1.10/src/mkheader.awk
new file mode 100644
index 0000000..0ff08f9
--- /dev/null
+++ b/libgpg-error-1.10/src/mkheader.awk
@@ -0,0 +1,218 @@
+# mkheader.awk
+# Copyright (C) 2003, 2004 g10 Code GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+#
+# As a special exception, g10 Code GmbH gives unlimited permission to
+# copy, distribute and modify the C source files that are the output
+# of mkheader.awk. You need not follow the terms of the GNU General
+# Public License when using or distributing such scripts, even though
+# portions of the text of mkheader.awk appear in them. The GNU
+# General Public License (GPL) does govern all other use of the material
+# that constitutes the mkheader.awk program.
+#
+# Certain portions of the mkheader.awk source text are designed to be
+# copied (in certain cases, depending on the input) into the output of
+# mkheader.awk. We call these the "data" portions. The rest of the
+# mkheader.awk source text consists of comments plus executable code
+# that decides which of the data portions to output in any given case.
+# We call these comments and executable code the "non-data" portions.
+# mkheader.h never copies any of the non-data portions into its output.
+#
+# This special exception to the GPL applies to versions of mkheader.awk
+# released by g10 Code GmbH. When you make and distribute a modified version
+# of mkheader.awk, you may extend this special exception to the GPL to
+# apply to your modified version as well, *unless* your modified version
+# has the potential to copy into its output some of the text that was the
+# non-data portion of the version that you started with. (In other words,
+# unless your change moves or copies text from the non-data portions to the
+# data portions.) If your modification has such potential, you must delete
+# any notice of this special exception to the GPL from your modified version.
+
+# This script processes gpg-error.h.in in an awful way.
+# Its input is, one after another, the content of the err-sources.h.in file,
+# the err-codes.h.in file, the errnos.in file, and then gpg-error.h.in.
+# There is nothing fancy about this.
+#
+# An alternative would be to use getline to get the content of the first three files,
+# but then we need to pre-process gpg-error.h.in with configure to get
+# at the full path of the files in @srcdir@.
+
+BEGIN {
+ FS = "[\t]+";
+# sources_nr holds the number of error sources.
+ sources_nr = 0;
+# codes_nr holds the number of error codes.
+ codes_nr = 0;
+# errnos_nr holds the number of system errors.
+ errnos_nr = 0;
+# extra_nr holds the number of extra lines to be included.
+ extra_nr = 0
+
+# These variables walk us through our input.
+ sources_header = 1;
+ sources_body = 0;
+ between_sources_and_codes = 0;
+ codes_body = 0;
+ between_codes_and_errnos = 0;
+ errnos_body = 0;
+ extra_body = 0;
+ gpg_error_h = 0;
+
+ print "/* Output of mkheader.awk. DO NOT EDIT. -*- buffer-read-only: t -*- */";
+ print "";
+
+}
+
+
+sources_header {
+ if ($1 ~ /^[0123456789]+$/)
+ {
+ sources_header = 0;
+ sources_body = 1;
+ }
+}
+
+sources_body {
+ sub (/\#.+/, "");
+ sub (/[ ]+$/, ""); # Strip trailing space and tab characters.
+
+ if (/^$/)
+ next;
+
+ if ($1 == "")
+ {
+ sources_body = 0;
+ between_sources_and_codes = 1;
+ }
+ else
+ {
+# Remember the error source number and symbol of each error source.
+ sources_idx[sources_nr] = $1;
+ sources_sym[sources_nr] = $2;
+ sources_nr++;
+ }
+}
+
+between_sources_and_codes {
+ if ($1 ~ /^[0123456789]+$/)
+ {
+ between_sources_and_codes = 0;
+ codes_body = 1;
+ }
+}
+
+codes_body {
+ sub (/\#.+/, "");
+ sub (/[ ]+$/, ""); # Strip trailing space and tab characters.
+
+ if (/^$/)
+ next;
+
+ if ($1 == "")
+ {
+ codes_body = 0;
+ between_codes_and_errnos = 1;
+ }
+ else
+ {
+# Remember the error code number and symbol of each error source.
+ codes_idx[codes_nr] = $1;
+ codes_sym[codes_nr] = $2;
+ codes_nr++;
+ }
+}
+
+between_codes_and_errnos {
+ if ($1 ~ /^[0-9]/)
+ {
+ between_codes_and_errnos = 0;
+ errnos_body = 1;
+ }
+}
+
+errnos_body {
+ sub (/\#.+/, "");
+ sub (/[ ]+$/, ""); # Strip trailing space and tab characters.
+
+ if (/^$/)
+ next;
+
+ if ($1 !~ /^[0-9]/)
+ {
+# Note that this assumes that extra_body.in doesn't start with a digit.
+ errnos_body = 0;
+ extra_body = 1;
+ }
+ else
+ {
+ errnos_idx[errnos_nr] = "GPG_ERR_SYSTEM_ERROR | " $1;
+ errnos_sym[errnos_nr] = "GPG_ERR_" $2;
+ errnos_nr++;
+ }
+}
+
+extra_body {
+ if (/^##/)
+ next
+
+ if (/^EOF/)
+ {
+ extra_body = 0;
+ gpg_error_h = 1;
+ next;
+ }
+ else
+ {
+ extra_line[extra_nr] = $0;
+ extra_nr++;
+ }
+}
+
+gpg_error_h {
+ if ($0 ~ /^@include err-sources/)
+ {
+ for (i = 0; i < sources_nr; i++)
+ {
+ print " " sources_sym[i] " = " sources_idx[i] ",";
+# print "#define " sources_sym[i] " (" sources_idx[i] ")";
+ }
+ }
+ else if ($0 ~ /^@include err-codes/)
+ {
+ for (i = 0; i < codes_nr; i++)
+ {
+ print " " codes_sym[i] " = " codes_idx[i] ",";
+# print "#define " codes_sym[i] " (" codes_idx[i] ")";
+ }
+ }
+ else if ($0 ~ /^@include errnos/)
+ {
+ for (i = 0; i < errnos_nr; i++)
+ {
+ print " " errnos_sym[i] " = " errnos_idx[i] ",";
+# print "#define " errnos_sym[i] " (" errnos_idx[i] ")";
+ }
+ }
+ else if ($0 ~ /^@include extra-h.in/)
+ {
+ for (i = 0; i < extra_nr; i++)
+ {
+ print extra_line[i];
+ }
+ }
+ else
+ print;
+}
diff --git a/libgpg-error-1.10/src/mkstrtable.awk b/libgpg-error-1.10/src/mkstrtable.awk
new file mode 100644
index 0000000..d97e150
--- /dev/null
+++ b/libgpg-error-1.10/src/mkstrtable.awk
@@ -0,0 +1,189 @@
+# mkstrtable.awk
+# Copyright (C) 2003, 2004, 2008 g10 Code GmbH
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+#
+# As a special exception, g10 Code GmbH gives unlimited permission to
+# copy, distribute and modify the C source files that are the output
+# of mkstrtable.awk. You need not follow the terms of the GNU General
+# Public License when using or distributing such scripts, even though
+# portions of the text of mkstrtable.awk appear in them. The GNU
+# General Public License (GPL) does govern all other use of the material
+# that constitutes the mkstrtable.awk program.
+#
+# Certain portions of the mkstrtable.awk source text are designed to be
+# copied (in certain cases, depending on the input) into the output of
+# mkstrtable.awk. We call these the "data" portions. The rest of the
+# mkstrtable.awk source text consists of comments plus executable code
+# that decides which of the data portions to output in any given case.
+# We call these comments and executable code the "non-data" portions.
+# mkstrtable.h never copies any of the non-data portions into its output.
+#
+# This special exception to the GPL applies to versions of mkstrtable.awk
+# released by g10 Code GmbH. When you make and distribute a modified version
+# of mkstrtable.awk, you may extend this special exception to the GPL to
+# apply to your modified version as well, *unless* your modified version
+# has the potential to copy into its output some of the text that was the
+# non-data portion of the version that you started with. (In other words,
+# unless your change moves or copies text from the non-data portions to the
+# data portions.) If your modification has such potential, you must delete
+# any notice of this special exception to the GPL from your modified version.
+
+# This script outputs a source file that does define the following
+# symbols:
+#
+# static const char msgstr[];
+# A string containing all messages in the list.
+#
+# static const int msgidx[];
+# A list of index numbers, one for each message, that points to the
+# beginning of the string in msgstr.
+#
+# msgidxof (code);
+# A macro that maps code numbers to idx numbers. If a DEFAULT MESSAGE
+# is provided (see below), its index will be returned for unknown codes.
+# Otherwise -1 is returned for codes that do not appear in the list.
+# You can lookup the message with code CODE with:
+# msgstr + msgidx[msgidxof (code)].
+#
+# The input file has the following format:
+# CODE1 ... MESSAGE1 (code nr, <tab>, something, <tab>, msg)
+# CODE2 ... MESSAGE2 (code nr, <tab>, something, <tab>, msg)
+# ...
+# CODEn ... MESSAGEn (code nr, <tab>, something, <tab>, msg)
+# ... DEFAULT-MESSAGE (<tab>, something, <tab>, fall-back msg)
+#
+# Comments (starting with # and ending at the end of the line) are removed,
+# as is trailing whitespace. The last line is optional; if no DEFAULT
+# MESSAGE is given, msgidxof will return the number -1 for unknown
+# index numbers.
+#
+# The field to be used is specified with the variable "textidx" on
+# the command line. It defaults to 2.
+#
+# The variable nogettext can be set to 1 to suppress gettext markers.
+#
+# The variable prefix can be used to prepend a string to each message.
+#
+# The variable namespace can be used to prepend a string to each
+# variable and macro name.
+
+BEGIN {
+ FS = "[\t]+";
+# cpos holds the current position in the message string.
+ cpos = 0;
+# msg holds the number of messages.
+ msg = 0;
+ print "/* Output of mkstrtable.awk. DO NOT EDIT. */";
+ print "";
+ header = 1;
+ if (textidx == 0)
+ textidx = 2;
+# nogettext can be set to 1 to suppress gettext noop markers.
+}
+
+/^#/ { next; }
+
+header {
+ if ($1 ~ /^[0123456789]+$/)
+ {
+ print "/* The purpose of this complex string table is to produce";
+ print " optimal code with a minimum of relocations. */";
+ print "";
+ print "static const char " namespace "msgstr[] = ";
+ header = 0;
+ }
+ else
+ print;
+}
+
+!header {
+ sub (/\#.+/, "");
+ sub (/[ ]+$/, ""); # Strip trailing space and tab characters.
+
+ if (/^$/)
+ next;
+
+# Print the string msgstr line by line. We delay output by one line to be able
+# to treat the last line differently (see END).
+ if (last_msgstr)
+ {
+ if (nogettext)
+ print " \"" last_msgstr "\" \"\\0\"";
+ else
+ print " gettext_noop (\"" last_msgstr "\") \"\\0\"";
+ }
+ last_msgstr = prefix $textidx;
+
+# Remember the error code and msgidx of each error message.
+ code[msg] = $1;
+ pos[msg] = cpos;
+ cpos += length (last_msgstr) + 1;
+ msg++;
+
+ if ($1 == "")
+ {
+ has_default = 1;
+ exit;
+ }
+}
+END {
+ if (has_default)
+ coded_msgs = msg - 1;
+ else
+ coded_msgs = msg;
+
+ if (nogettext)
+ print " \"" last_msgstr "\";";
+ else
+ print " gettext_noop (\"" last_msgstr "\");";
+ print "";
+ print "static const int " namespace "msgidx[] =";
+ print " {";
+ for (i = 0; i < coded_msgs; i++)
+ print " " pos[i] ",";
+ print " " pos[coded_msgs];
+ print " };";
+ print "";
+ print "static inline int";
+ print namespace "msgidxof (int code)";
+ print "{";
+ print " return (0 ? 0";
+
+# Gather the ranges.
+ skip = code[0];
+ start = code[0];
+ stop = code[0];
+ for (i = 1; i < coded_msgs; i++)
+ {
+ if (code[i] == stop + 1)
+ stop++;
+ else
+ {
+ print " : ((code >= " start ") && (code <= " stop ")) ? (code - " \
+ skip ")";
+ skip += code[i] - stop - 1;
+ start = code[i];
+ stop = code[i];
+ }
+ }
+ print " : ((code >= " start ") && (code <= " stop ")) ? (code - " \
+ skip ")";
+ if (has_default)
+ print " : " stop + 1 " - " skip ");";
+ else
+ print " : -1);";
+ print "}";
+}
diff --git a/libgpg-error-1.10/src/mkw32errmap.c b/libgpg-error-1.10/src/mkw32errmap.c
new file mode 100644
index 0000000..68d0f05
--- /dev/null
+++ b/libgpg-error-1.10/src/mkw32errmap.c
@@ -0,0 +1,178 @@
+/* mkw32errmap.c - Generate mapping sources for Windows.
+ Copyright (C) 2010 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifdef RESOLVE_MACROS
+# include <winerror.h>
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+
+static const char header_gpg_extra_errno_h[] =
+ "/* errno.h - WindowsCE errno.h substitute\n"
+ " Copyright (C) 2010 g10 Code GmbH\n"
+ "\n"
+ " This file is free software; as a special exception the author gives\n"
+ " unlimited permission to copy and/or distribute it, with or without\n"
+ " modifications, as long as this notice is preserved.\n"
+ "\n"
+ " This file is distributed in the hope that it will be useful, but\n"
+ " WITHOUT ANY WARRANTY, to the extent permitted by law; without even\n"
+ " the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR\n"
+ " PURPOSE.\n"
+ "\n"
+ " +++ Do not edit! File has been generated by mkw32errmap.c +++\n"
+ "\n"
+ " This file is intended to be used with ming32ce-gcc to implement an\n"
+ " errno substitute under WindowsCE. It must be included via gcc's\n"
+ " -idirafter option. The gpg-error-config script emits the\n"
+ " appropriate option snippet. The actual implementation of the errno\n"
+ " related functions are part of libgpg-error. A separate header file\n"
+ " is required because errno.h is often included before gpg-error.h.\n"
+ " */\n"
+ "\n"
+ "#ifndef _GPG_ERROR_EXTRA_ERRNO_H\n"
+ "#define _GPG_ERROR_EXTRA_ERRNO_H\n"
+ "\n"
+ "/* Due to peculiarities in W32 we can't implement ERRNO as an\n"
+ " writable lvalue. This also allows us to easily find places\n"
+ " where ERRNO is being written to. See also gpg_err_set_errno. */\n"
+ "int _gpg_w32ce_get_errno (void);\n"
+ "#define errno (_gpg_w32ce_get_errno ())\n"
+ "\n";
+static const char footer_gpg_extra_errno_h[] =
+ "\n"
+ "#endif /*_GPG_ERROR_EXTRA_ERRNO_H*/\n";
+
+
+/* The table below is used in two modes. First we run the host
+ preprocessor over it to generate a new include file. This include
+ file has the same content but the Windows error macros are
+ resolved. This is so that we don't need to include winerror.h into
+ the generated errno.h. The mkw32errmap_marker variable is only
+ here to have something to grep for after preprocessing. */
+static int mkw32errmap_marker;
+struct table_s
+{
+ int *dummy;
+ const char *name;
+ int w32code;
+ int w32code2;
+};
+
+struct table_s table[] =
+ {
+#ifdef RESOLVE_MACROS
+#define X(a,b,c) \
+ {&mkw32errmap_marker, (a), (b), (c)}
+ X( "EPERM", ERROR_CANNOT_MAKE , 0 ),
+ X( "ENOENT", ERROR_FILE_NOT_FOUND , ERROR_PATH_NOT_FOUND ),
+ X( "EINTR", ERROR_INVALID_AT_INTERRUPT_TIME , 0 ),
+ X( "EIO", ERROR_IO_DEVICE , 0 ),
+ X( "ENXIO", ERROR_FILE_INVALID , 0 ),
+ X( "EBADF", ERROR_INVALID_HANDLE , 0 ),
+ X( "EAGAIN", ERROR_MORE_DATA , WSAEWOULDBLOCK ),
+
+ X( "ENOMEM", ERROR_NOT_ENOUGH_MEMORY , 0 ),
+ X( "EACCES", ERROR_ACCESS_DENIED , 0 ),
+ X( "EFAULT", ERROR_PROCESS_ABORTED , 0 ),
+ X( "EBUSY", ERROR_BUSY , 0 ),
+ X( "EEXIST", ERROR_FILE_EXISTS , WSAEADDRINUSE ),
+
+ X( "EXDEV", ERROR_NOT_SAME_DEVICE , 0 ),
+ X( "ENODEV", ERROR_BAD_DEVICE , ERROR_DEV_NOT_EXIST ),
+
+ X( "ENOTDIR",ERROR_DIRECTORY , 0 ),
+ X( "EINVAL", ERROR_INVALID_PARAMETER , 0 ),
+ X( "ENFILE", ERROR_NO_MORE_FILES , 0 ),
+ X( "EMFILE", ERROR_TOO_MANY_OPEN_FILES , 0 ),
+ X( "ENOSPC", ERROR_DISK_FULL , 0 ),
+ X( "EROFS", ERROR_WRITE_PROTECT , 0 ),
+ X( "EPIPE", ERROR_BROKEN_PIPE , 0 ),
+ X( "ERANGE", ERROR_ARITHMETIC_OVERFLOW , 0 ),
+ X( "EDEADLOCK",ERROR_POSSIBLE_DEADLOCK , 0 ),
+ X( "ENAMETOOLONG", ERROR_FILENAME_EXCED_RANGE, 0 ),
+ X( "ENOLCK", ERROR_SHARING_BUFFER_EXCEEDED , 0 ),
+ X( "ENOSYS", ERROR_NOT_SUPPORTED , 0 ),
+ X( "ENOTEMPTY",ERROR_DIR_NOT_EMPTY , 0 ),
+ X( "ESPIPE", ERROR_SEEK_ON_DEVICE , 0 ),
+#if 0 /* FIXME: Find appropriate mappings. */
+ X( "EILSEQ", ),
+ X( "EDOM", ),
+ X( "EMLINK", ),
+ X( "ESRCH", ), /* No such process */
+ X( "E2BIG", ), /* Arg list too long */
+ X( "ENOEXEC", ), /* Exec format error */
+ X( "ECHILD", ), /* No child processes */
+ X( "EISDIR", ), /* Is a directory */
+ X( "ENOTTY", ), /* Inappropriate I/O control operation */
+ X( "EFBIG", ), /* File too large */
+#endif
+#undef X
+#else /*!RESOLVE_MACROS*/
+# include "mkw32errmap.tab.h"
+#endif /*!RESOLVE_MACROS*/
+ { NULL, 0 }
+ };
+
+
+
+static int
+compare_table (const void *a_v, const void *b_v)
+{
+ const struct table_s *a = a_v;
+ const struct table_s *b = b_v;
+
+ return (a->w32code - b->w32code);
+}
+
+
+int
+main (int argc, char **argv)
+{
+ int idx;
+
+ for (idx=0; table[idx].name; idx++)
+ ;
+ qsort (table, idx, sizeof *table, compare_table);
+
+ if (argc == 2 && !strcmp (argv[1], "--map"))
+ {
+ fputs ("static int\n"
+ "map_w32codes (int err)\n"
+ "{\n"
+ " switch (err)\n"
+ " {\n", stdout );
+ for (idx=0; table[idx].name; idx++)
+ if (table[idx].w32code2)
+ printf (" case %d: return %d;\n",
+ table[idx].w32code2, table[idx].w32code);
+ fputs (" default: return err;\n"
+ " }\n"
+ "}\n", stdout);
+ }
+ else
+ {
+ fputs (header_gpg_extra_errno_h, stdout);
+ for (idx=0; table[idx].name; idx++)
+ printf ("#define %-12s %5d\n", table[idx].name, table[idx].w32code);
+ fputs (footer_gpg_extra_errno_h, stdout);
+ }
+
+ return 0;
+}
diff --git a/libgpg-error-1.10/src/strerror-sym.c b/libgpg-error-1.10/src/strerror-sym.c
new file mode 100644
index 0000000..3d79f40
--- /dev/null
+++ b/libgpg-error-1.10/src/strerror-sym.c
@@ -0,0 +1,56 @@
+/* strerror-sym.c - Describing an error code with its symbol name.
+ Copyright (C) 2003, 2004 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stddef.h>
+
+#include <gpg-error.h>
+
+#include "err-codes-sym.h"
+#include "errnos-sym.h"
+
+/* Return a pointer to a string containing the name of the symbol of
+ the error code in the error value ERR. Returns NULL if the error
+ code is not known. */
+const char *
+gpg_strerror_sym (gpg_error_t err)
+{
+ gpg_err_code_t code = gpg_err_code (err);
+
+ if (code & GPG_ERR_SYSTEM_ERROR)
+ {
+ int idx;
+
+ code &= ~GPG_ERR_SYSTEM_ERROR;
+ idx = errnos_msgidxof (code);
+ if (idx >= 0)
+ return errnos_msgstr + errnos_msgidx[idx];
+ else
+ return NULL;
+ }
+
+ if (msgidxof (code) == msgidxof (GPG_ERR_CODE_DIM))
+ return NULL;
+
+ return msgstr + msgidx[msgidxof (code)];
+}
diff --git a/libgpg-error-1.10/src/strerror.c b/libgpg-error-1.10/src/strerror.c
new file mode 100644
index 0000000..dc56040
--- /dev/null
+++ b/libgpg-error-1.10/src/strerror.c
@@ -0,0 +1,169 @@
+/* strerror.c - Describing an error code.
+ Copyright (C) 2003 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+
+#include <gpg-error.h>
+
+#include "gettext.h"
+#include "err-codes.h"
+
+/* Return a pointer to a string containing a description of the error
+ code in the error value ERR. This function is not thread-safe. */
+const char *
+gpg_strerror (gpg_error_t err)
+{
+ gpg_err_code_t code = gpg_err_code (err);
+
+ if (code & GPG_ERR_SYSTEM_ERROR)
+ {
+ int no = gpg_err_code_to_errno (code);
+ if (no)
+ return strerror (no);
+ else
+ code = GPG_ERR_UNKNOWN_ERRNO;
+ }
+ return dgettext (PACKAGE, msgstr + msgidx[msgidxof (code)]);
+}
+
+
+#ifdef HAVE_STRERROR_R
+#ifdef STRERROR_R_CHAR_P
+/* The GNU C library and probably some other systems have this weird
+ variant of strerror_r. */
+
+/* Return a dynamically allocated string in *STR describing the system
+ error NO. If this call succeeds, return 1. If this call fails due
+ to a resource shortage, set *STR to NULL and return 1. If this
+ call fails because the error number is not valid, don't set *STR
+ and return 0. */
+static int
+system_strerror_r (int no, char *buf, size_t buflen)
+{
+ char *errstr;
+
+ errstr = strerror_r (no, buf, buflen);
+ if (errstr != buf)
+ {
+ size_t errstr_len = strlen (errstr) + 1;
+ size_t cpy_len = errstr_len < buflen ? errstr_len : buflen;
+ memcpy (buf, errstr, cpy_len);
+
+ return cpy_len == errstr_len ? 0 : ERANGE;
+ }
+ else
+ {
+ /* We can not tell if the buffer was large enough, but we can
+ try to make a guess. */
+ if (strlen (buf) + 1 >= buflen)
+ return ERANGE;
+
+ return 0;
+ }
+}
+
+#else /* STRERROR_R_CHAR_P */
+/* Now the POSIX version. */
+
+static int
+system_strerror_r (int no, char *buf, size_t buflen)
+{
+ return strerror_r (no, buf, buflen);
+}
+
+#endif /* STRERROR_R_CHAR_P */
+
+#else /* HAVE_STRERROR_H */
+/* Without strerror_r(), we can still provide a non-thread-safe
+ version. Maybe we are even lucky and the system's strerror() is
+ already thread-safe. */
+
+static int
+system_strerror_r (int no, char *buf, size_t buflen)
+{
+ char *errstr = strerror (no);
+
+ if (!errstr)
+ {
+ int saved_errno = errno;
+
+ if (saved_errno != EINVAL)
+ snprintf (buf, buflen, "strerror failed: %i\n", errno);
+ return saved_errno;
+ }
+ else
+ {
+ size_t errstr_len = strlen (errstr) + 1;
+ size_t cpy_len = errstr_len < buflen ? errstr_len : buflen;
+ memcpy (buf, errstr, cpy_len);
+ return cpy_len == errstr_len ? 0 : ERANGE;
+ }
+}
+#endif
+
+
+/* Return the error string for ERR in the user-supplied buffer BUF of
+ size BUFLEN. This function is, in contrast to gpg_strerror,
+ thread-safe if a thread-safe strerror_r() function is provided by
+ the system. If the function succeeds, 0 is returned and BUF
+ contains the string describing the error. If the buffer was not
+ large enough, ERANGE is returned and BUF contains as much of the
+ beginning of the error string as fits into the buffer. */
+int
+gpg_strerror_r (gpg_error_t err, char *buf, size_t buflen)
+{
+ gpg_err_code_t code = gpg_err_code (err);
+ const char *errstr;
+ size_t errstr_len;
+ size_t cpy_len;
+
+ if (code & GPG_ERR_SYSTEM_ERROR)
+ {
+ int no = gpg_err_code_to_errno (code);
+ if (no)
+ {
+ int system_err = system_strerror_r (no, buf, buflen);
+
+ if (system_err != EINVAL)
+ {
+ if (buflen)
+ buf[buflen - 1] = '\0';
+ return system_err;
+ }
+ }
+ code = GPG_ERR_UNKNOWN_ERRNO;
+ }
+
+ errstr = dgettext (PACKAGE, msgstr + msgidx[msgidxof (code)]);
+ errstr_len = strlen (errstr) + 1;
+ cpy_len = errstr_len < buflen ? errstr_len : buflen;
+ memcpy (buf, errstr, cpy_len);
+ if (buflen)
+ buf[buflen - 1] = '\0';
+
+ return cpy_len == errstr_len ? 0 : ERANGE;
+}
diff --git a/libgpg-error-1.10/src/strsource-sym.c b/libgpg-error-1.10/src/strsource-sym.c
new file mode 100644
index 0000000..a191310
--- /dev/null
+++ b/libgpg-error-1.10/src/strsource-sym.c
@@ -0,0 +1,43 @@
+/* strsource-sym.c - Describing an error source with its symbol name.
+ Copyright (C) 2003, 2004 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stddef.h>
+
+#include <gpg-error.h>
+
+#include "err-sources-sym.h"
+
+/* Return a pointer to a string containing the name of the symbol of
+ the error source in the error value ERR. Returns NULL if the error
+ code is not known. */
+const char *
+gpg_strsource_sym (gpg_error_t err)
+{
+ gpg_err_source_t source = gpg_err_source (err);
+
+ if (msgidxof (source) == msgidxof (GPG_ERR_SOURCE_DIM))
+ return NULL;
+
+ return msgstr + msgidx[msgidxof (source)];
+}
diff --git a/libgpg-error-1.10/src/strsource.c b/libgpg-error-1.10/src/strsource.c
new file mode 100644
index 0000000..66d783c
--- /dev/null
+++ b/libgpg-error-1.10/src/strsource.c
@@ -0,0 +1,37 @@
+/* strsource.c - Describing an error source.
+ Copyright (C) 2003 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpg-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <gpg-error.h>
+
+#include "gettext.h"
+#include "err-sources.h"
+
+/* Return a pointer to a string containing a description of the error
+ source in the error value ERR. */
+const char *
+gpg_strsource (gpg_error_t err)
+{
+ gpg_err_source_t source = gpg_err_source (err);
+ return dgettext (PACKAGE, msgstr + msgidx[msgidxof (source)]);
+}
diff --git a/libgpg-error-1.10/src/versioninfo.rc.in b/libgpg-error-1.10/src/versioninfo.rc.in
new file mode 100644
index 0000000..3384adc
--- /dev/null
+++ b/libgpg-error-1.10/src/versioninfo.rc.in
@@ -0,0 +1,52 @@
+/* versioninfo.rc.in - for libgpg-error
+ * Copyright (C) 2005 g10 Code GmbH
+ *
+ * This file is free software; as a special exception the author gives
+ * unlimited permission to copy and/or distribute it, with or without
+ * modifications, as long as this notice is preserved.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
+ * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+/* This file is processed by configure to create versioninfo.rc */
+
+#line __LINE__ "versioninfo.rc.in"
+
+#include <afxres.h>
+
+
+VS_VERSION_INFO VERSIONINFO
+ FILEVERSION @BUILD_FILEVERSION@
+ PRODUCTVERSION @BUILD_FILEVERSION@
+ FILEFLAGSMASK 0x3fL
+#ifdef _DEBUG
+ FILEFLAGS 0x21L
+#else
+ FILEFLAGS 0x20L
+#endif
+ FILEOS 0x40004L
+ FILETYPE 0x1L
+ FILESUBTYPE 0x0L
+BEGIN
+ BLOCK "StringFileInfo"
+ BEGIN
+ BLOCK "040904b0"
+ BEGIN
+ VALUE "Comments", "Provided under the terms of the GNU Lesser General Public License.\0"
+ VALUE "CompanyName", "g10 Code GmbH\0"
+ VALUE "FileDescription", "libgpg-error - Common error codes\0"
+ VALUE "FileVersion", "@VERSION@\0"
+ VALUE "InternalName", "libgpg-error\0"
+ VALUE "LegalCopyright", "Copyright © 2005 g10 Code GmbH\0"
+ VALUE "LegalTrademarks", "\0"
+ VALUE "OriginalFilename", "libgpg-error.dll\0"
+ VALUE "PrivateBuild", "\0"
+ VALUE "ProductName", "libgpg-error\0"
+ VALUE "ProductVersion", "@VERSION@\0"
+ VALUE "SpecialBuild", "@BUILD_TIMESTAMP@\0"
+ END
+ END
+END
+
diff --git a/libgpg-error-1.10/src/w32-add.h b/libgpg-error-1.10/src/w32-add.h
new file mode 100644
index 0000000..02848ac
--- /dev/null
+++ b/libgpg-error-1.10/src/w32-add.h
@@ -0,0 +1,40 @@
+## w32-add.h - Snippet to be be included into gpg-error.h.
+## Comments are indicated by a double hash mark. Due to a
+## peculiarity of the script the first used line must not
+## start with a hash mark.
+
+/* Decide whether to use the format_arg attribute. */
+#if _GPG_ERR_GCC_VERSION > 20800
+# define _GPG_ERR_ATTR_FORMAT_ARG(a) __attribute__ ((__format_arg__ (a)))
+#else
+# define _GPG_ERR_ATTR_FORMAT_ARG(a)
+#endif
+
+/* A lean gettext implementation based on GNU style mo files which are
+ required to be encoded in UTF-8. There is a limit on 65534 entries
+ to save some RAM. Only Germanic plural rules are supported. */
+const char *_gpg_w32_bindtextdomain (const char *domainname,
+ const char *dirname);
+const char *_gpg_w32_textdomain (const char *domainname);
+const char *_gpg_w32_gettext (const char *msgid)
+ _GPG_ERR_ATTR_FORMAT_ARG (1);
+const char *_gpg_w32_dgettext (const char *domainname, const char *msgid)
+ _GPG_ERR_ATTR_FORMAT_ARG (2);
+const char *_gpg_w32_dngettext (const char *domainname, const char *msgid1,
+ const char *msgid2, unsigned long int n)
+ _GPG_ERR_ATTR_FORMAT_ARG (2) _GPG_ERR_ATTR_FORMAT_ARG (3);
+const char *_gpg_w32_gettext_localename (void);
+int _gpg_w32_gettext_use_utf8 (int value);
+
+#ifdef GPG_ERR_ENABLE_GETTEXT_MACROS
+# define bindtextdomain(a,b) _gpg_w32_bindtextdomain ((a), (b))
+# define textdomain(a) _gpg_w32_textdomain ((a))
+# define gettext(a) _gpg_w32_gettext ((a))
+# define dgettext(a,b) _gpg_w32_dgettext ((a), (b))
+# define ngettext(a,b,c) _gpg_w32_dngettext (NULL, (a), (b), (c))
+# define dngettext(a,b,c,d) _gpg_w32_dngettext ((a), (b), (c), (d))
+# define gettext_localename() _gpg_w32_gettext_localename ()
+# define gettext_use_utf8(a) _gpg_w32_gettext_use_utf8 (a)
+#endif /*GPG_ERR_ENABLE_GETTEXT_MACROS*/
+
+
diff --git a/libgpg-error-1.10/src/w32-gettext.c b/libgpg-error-1.10/src/w32-gettext.c
new file mode 100644
index 0000000..ca4fbbd
--- /dev/null
+++ b/libgpg-error-1.10/src/w32-gettext.c
@@ -0,0 +1,1905 @@
+/* w32-gettext.h - A simple gettext implementation for Windows targets.
+ Copyright (C) 1995, 1996, 1997, 1999, 2005, 2007,
+ 2008, 2010 Free Software Foundation, Inc.
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+#if !defined (_WIN32) && !defined (__CYGWIN32__)
+# error This module may only be build for Windows or Cygwin32
+#endif
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <ctype.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <stdint.h>
+#ifndef HAVE_W32CE_SYSTEM
+# include <locale.h>
+#endif /*HAVE_W32CE_SYSTEM*/
+#include <windows.h>
+
+#ifdef JNLIB_IN_JNLIB
+#include "libjnlib-config.h"
+#endif
+
+#ifndef jnlib_malloc
+# define jnlib_malloc(a) malloc ((a))
+# define jnlib_calloc(a,b) calloc ((a), (b))
+# define jnlib_free(a) free ((a))
+# define jnlib_xstrdup(a) not_used
+#endif /*!jnlib_malloc*/
+
+#include "init.h"
+
+
+
+/* localname.c from gettext BEGIN. */
+
+/* Determine the current selected locale.
+ Copyright (C) 1995-1999, 2000-2003 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Library General Public License as published
+ by the Free Software Foundation; either version 2, or (at your option)
+ any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Library General Public License for more details.
+
+ You should have received a copy of the GNU Library General Public
+ License along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
+ USA. */
+
+/* Written by Ulrich Drepper <drepper@gnu.org>, 1995. */
+/* Win32 code written by Tor Lillqvist <tml@iki.fi>. */
+/* Renamed _nl_locale_name, removed unsed args, removed include files,
+ non-W32 code and changed comments <wk@gnupg.org>. */
+
+/* Mingw headers don't have latest language and sublanguage codes. */
+#ifndef LANG_AFRIKAANS
+#define LANG_AFRIKAANS 0x36
+#endif
+#ifndef LANG_ALBANIAN
+#define LANG_ALBANIAN 0x1c
+#endif
+#ifndef LANG_AMHARIC
+#define LANG_AMHARIC 0x5e
+#endif
+#ifndef LANG_ARABIC
+#define LANG_ARABIC 0x01
+#endif
+#ifndef LANG_ARMENIAN
+#define LANG_ARMENIAN 0x2b
+#endif
+#ifndef LANG_ASSAMESE
+#define LANG_ASSAMESE 0x4d
+#endif
+#ifndef LANG_AZERI
+#define LANG_AZERI 0x2c
+#endif
+#ifndef LANG_BASQUE
+#define LANG_BASQUE 0x2d
+#endif
+#ifndef LANG_BELARUSIAN
+#define LANG_BELARUSIAN 0x23
+#endif
+#ifndef LANG_BENGALI
+#define LANG_BENGALI 0x45
+#endif
+#ifndef LANG_BURMESE
+#define LANG_BURMESE 0x55
+#endif
+#ifndef LANG_CAMBODIAN
+#define LANG_CAMBODIAN 0x53
+#endif
+#ifndef LANG_CATALAN
+#define LANG_CATALAN 0x03
+#endif
+#ifndef LANG_CHEROKEE
+#define LANG_CHEROKEE 0x5c
+#endif
+#ifndef LANG_DIVEHI
+#define LANG_DIVEHI 0x65
+#endif
+#ifndef LANG_EDO
+#define LANG_EDO 0x66
+#endif
+#ifndef LANG_ESTONIAN
+#define LANG_ESTONIAN 0x25
+#endif
+#ifndef LANG_FAEROESE
+#define LANG_FAEROESE 0x38
+#endif
+#ifndef LANG_FARSI
+#define LANG_FARSI 0x29
+#endif
+#ifndef LANG_FRISIAN
+#define LANG_FRISIAN 0x62
+#endif
+#ifndef LANG_FULFULDE
+#define LANG_FULFULDE 0x67
+#endif
+#ifndef LANG_GAELIC
+#define LANG_GAELIC 0x3c
+#endif
+#ifndef LANG_GALICIAN
+#define LANG_GALICIAN 0x56
+#endif
+#ifndef LANG_GEORGIAN
+#define LANG_GEORGIAN 0x37
+#endif
+#ifndef LANG_GUARANI
+#define LANG_GUARANI 0x74
+#endif
+#ifndef LANG_GUJARATI
+#define LANG_GUJARATI 0x47
+#endif
+#ifndef LANG_HAUSA
+#define LANG_HAUSA 0x68
+#endif
+#ifndef LANG_HAWAIIAN
+#define LANG_HAWAIIAN 0x75
+#endif
+#ifndef LANG_HEBREW
+#define LANG_HEBREW 0x0d
+#endif
+#ifndef LANG_HINDI
+#define LANG_HINDI 0x39
+#endif
+#ifndef LANG_IBIBIO
+#define LANG_IBIBIO 0x69
+#endif
+#ifndef LANG_IGBO
+#define LANG_IGBO 0x70
+#endif
+#ifndef LANG_INDONESIAN
+#define LANG_INDONESIAN 0x21
+#endif
+#ifndef LANG_INUKTITUT
+#define LANG_INUKTITUT 0x5d
+#endif
+#ifndef LANG_KANNADA
+#define LANG_KANNADA 0x4b
+#endif
+#ifndef LANG_KANURI
+#define LANG_KANURI 0x71
+#endif
+#ifndef LANG_KASHMIRI
+#define LANG_KASHMIRI 0x60
+#endif
+#ifndef LANG_KAZAK
+#define LANG_KAZAK 0x3f
+#endif
+#ifndef LANG_KONKANI
+#define LANG_KONKANI 0x57
+#endif
+#ifndef LANG_KYRGYZ
+#define LANG_KYRGYZ 0x40
+#endif
+#ifndef LANG_LAO
+#define LANG_LAO 0x54
+#endif
+#ifndef LANG_LATIN
+#define LANG_LATIN 0x76
+#endif
+#ifndef LANG_LATVIAN
+#define LANG_LATVIAN 0x26
+#endif
+#ifndef LANG_LITHUANIAN
+#define LANG_LITHUANIAN 0x27
+#endif
+#ifndef LANG_MACEDONIAN
+#define LANG_MACEDONIAN 0x2f
+#endif
+#ifndef LANG_MALAY
+#define LANG_MALAY 0x3e
+#endif
+#ifndef LANG_MALAYALAM
+#define LANG_MALAYALAM 0x4c
+#endif
+#ifndef LANG_MALTESE
+#define LANG_MALTESE 0x3a
+#endif
+#ifndef LANG_MANIPURI
+#define LANG_MANIPURI 0x58
+#endif
+#ifndef LANG_MARATHI
+#define LANG_MARATHI 0x4e
+#endif
+#ifndef LANG_MONGOLIAN
+#define LANG_MONGOLIAN 0x50
+#endif
+#ifndef LANG_NEPALI
+#define LANG_NEPALI 0x61
+#endif
+#ifndef LANG_ORIYA
+#define LANG_ORIYA 0x48
+#endif
+#ifndef LANG_OROMO
+#define LANG_OROMO 0x72
+#endif
+#ifndef LANG_PAPIAMENTU
+#define LANG_PAPIAMENTU 0x79
+#endif
+#ifndef LANG_PASHTO
+#define LANG_PASHTO 0x63
+#endif
+#ifndef LANG_PUNJABI
+#define LANG_PUNJABI 0x46
+#endif
+#ifndef LANG_RHAETO_ROMANCE
+#define LANG_RHAETO_ROMANCE 0x17
+#endif
+#ifndef LANG_SAAMI
+#define LANG_SAAMI 0x3b
+#endif
+#ifndef LANG_SANSKRIT
+#define LANG_SANSKRIT 0x4f
+#endif
+#ifndef LANG_SERBIAN
+#define LANG_SERBIAN 0x1a
+#endif
+#ifndef LANG_SINDHI
+#define LANG_SINDHI 0x59
+#endif
+#ifndef LANG_SINHALESE
+#define LANG_SINHALESE 0x5b
+#endif
+#ifndef LANG_SLOVAK
+#define LANG_SLOVAK 0x1b
+#endif
+#ifndef LANG_SOMALI
+#define LANG_SOMALI 0x77
+#endif
+#ifndef LANG_SORBIAN
+#define LANG_SORBIAN 0x2e
+#endif
+#ifndef LANG_SUTU
+#define LANG_SUTU 0x30
+#endif
+#ifndef LANG_SWAHILI
+#define LANG_SWAHILI 0x41
+#endif
+#ifndef LANG_SYRIAC
+#define LANG_SYRIAC 0x5a
+#endif
+#ifndef LANG_TAGALOG
+#define LANG_TAGALOG 0x64
+#endif
+#ifndef LANG_TAJIK
+#define LANG_TAJIK 0x28
+#endif
+#ifndef LANG_TAMAZIGHT
+#define LANG_TAMAZIGHT 0x5f
+#endif
+#ifndef LANG_TAMIL
+#define LANG_TAMIL 0x49
+#endif
+#ifndef LANG_TATAR
+#define LANG_TATAR 0x44
+#endif
+#ifndef LANG_TELUGU
+#define LANG_TELUGU 0x4a
+#endif
+#ifndef LANG_THAI
+#define LANG_THAI 0x1e
+#endif
+#ifndef LANG_TIBETAN
+#define LANG_TIBETAN 0x51
+#endif
+#ifndef LANG_TIGRINYA
+#define LANG_TIGRINYA 0x73
+#endif
+#ifndef LANG_TSONGA
+#define LANG_TSONGA 0x31
+#endif
+#ifndef LANG_TSWANA
+#define LANG_TSWANA 0x32
+#endif
+#ifndef LANG_TURKMEN
+#define LANG_TURKMEN 0x42
+#endif
+#ifndef LANG_UKRAINIAN
+#define LANG_UKRAINIAN 0x22
+#endif
+#ifndef LANG_URDU
+#define LANG_URDU 0x20
+#endif
+#ifndef LANG_UZBEK
+#define LANG_UZBEK 0x43
+#endif
+#ifndef LANG_VENDA
+#define LANG_VENDA 0x33
+#endif
+#ifndef LANG_VIETNAMESE
+#define LANG_VIETNAMESE 0x2a
+#endif
+#ifndef LANG_WELSH
+#define LANG_WELSH 0x52
+#endif
+#ifndef LANG_XHOSA
+#define LANG_XHOSA 0x34
+#endif
+#ifndef LANG_YI
+#define LANG_YI 0x78
+#endif
+#ifndef LANG_YIDDISH
+#define LANG_YIDDISH 0x3d
+#endif
+#ifndef LANG_YORUBA
+#define LANG_YORUBA 0x6a
+#endif
+#ifndef LANG_ZULU
+#define LANG_ZULU 0x35
+#endif
+#ifndef SUBLANG_ARABIC_SAUDI_ARABIA
+#define SUBLANG_ARABIC_SAUDI_ARABIA 0x01
+#endif
+#ifndef SUBLANG_ARABIC_IRAQ
+#define SUBLANG_ARABIC_IRAQ 0x02
+#endif
+#ifndef SUBLANG_ARABIC_EGYPT
+#define SUBLANG_ARABIC_EGYPT 0x03
+#endif
+#ifndef SUBLANG_ARABIC_LIBYA
+#define SUBLANG_ARABIC_LIBYA 0x04
+#endif
+#ifndef SUBLANG_ARABIC_ALGERIA
+#define SUBLANG_ARABIC_ALGERIA 0x05
+#endif
+#ifndef SUBLANG_ARABIC_MOROCCO
+#define SUBLANG_ARABIC_MOROCCO 0x06
+#endif
+#ifndef SUBLANG_ARABIC_TUNISIA
+#define SUBLANG_ARABIC_TUNISIA 0x07
+#endif
+#ifndef SUBLANG_ARABIC_OMAN
+#define SUBLANG_ARABIC_OMAN 0x08
+#endif
+#ifndef SUBLANG_ARABIC_YEMEN
+#define SUBLANG_ARABIC_YEMEN 0x09
+#endif
+#ifndef SUBLANG_ARABIC_SYRIA
+#define SUBLANG_ARABIC_SYRIA 0x0a
+#endif
+#ifndef SUBLANG_ARABIC_JORDAN
+#define SUBLANG_ARABIC_JORDAN 0x0b
+#endif
+#ifndef SUBLANG_ARABIC_LEBANON
+#define SUBLANG_ARABIC_LEBANON 0x0c
+#endif
+#ifndef SUBLANG_ARABIC_KUWAIT
+#define SUBLANG_ARABIC_KUWAIT 0x0d
+#endif
+#ifndef SUBLANG_ARABIC_UAE
+#define SUBLANG_ARABIC_UAE 0x0e
+#endif
+#ifndef SUBLANG_ARABIC_BAHRAIN
+#define SUBLANG_ARABIC_BAHRAIN 0x0f
+#endif
+#ifndef SUBLANG_ARABIC_QATAR
+#define SUBLANG_ARABIC_QATAR 0x10
+#endif
+#ifndef SUBLANG_AZERI_LATIN
+#define SUBLANG_AZERI_LATIN 0x01
+#endif
+#ifndef SUBLANG_AZERI_CYRILLIC
+#define SUBLANG_AZERI_CYRILLIC 0x02
+#endif
+#ifndef SUBLANG_BENGALI_INDIA
+#define SUBLANG_BENGALI_INDIA 0x01
+#endif
+#ifndef SUBLANG_BENGALI_BANGLADESH
+#define SUBLANG_BENGALI_BANGLADESH 0x02
+#endif
+#ifndef SUBLANG_CHINESE_MACAU
+#define SUBLANG_CHINESE_MACAU 0x05
+#endif
+#ifndef SUBLANG_ENGLISH_SOUTH_AFRICA
+#define SUBLANG_ENGLISH_SOUTH_AFRICA 0x07
+#endif
+#ifndef SUBLANG_ENGLISH_JAMAICA
+#define SUBLANG_ENGLISH_JAMAICA 0x08
+#endif
+#ifndef SUBLANG_ENGLISH_CARIBBEAN
+#define SUBLANG_ENGLISH_CARIBBEAN 0x09
+#endif
+#ifndef SUBLANG_ENGLISH_BELIZE
+#define SUBLANG_ENGLISH_BELIZE 0x0a
+#endif
+#ifndef SUBLANG_ENGLISH_TRINIDAD
+#define SUBLANG_ENGLISH_TRINIDAD 0x0b
+#endif
+#ifndef SUBLANG_ENGLISH_ZIMBABWE
+#define SUBLANG_ENGLISH_ZIMBABWE 0x0c
+#endif
+#ifndef SUBLANG_ENGLISH_PHILIPPINES
+#define SUBLANG_ENGLISH_PHILIPPINES 0x0d
+#endif
+#ifndef SUBLANG_ENGLISH_INDONESIA
+#define SUBLANG_ENGLISH_INDONESIA 0x0e
+#endif
+#ifndef SUBLANG_ENGLISH_HONGKONG
+#define SUBLANG_ENGLISH_HONGKONG 0x0f
+#endif
+#ifndef SUBLANG_ENGLISH_INDIA
+#define SUBLANG_ENGLISH_INDIA 0x10
+#endif
+#ifndef SUBLANG_ENGLISH_MALAYSIA
+#define SUBLANG_ENGLISH_MALAYSIA 0x11
+#endif
+#ifndef SUBLANG_ENGLISH_SINGAPORE
+#define SUBLANG_ENGLISH_SINGAPORE 0x12
+#endif
+#ifndef SUBLANG_FRENCH_LUXEMBOURG
+#define SUBLANG_FRENCH_LUXEMBOURG 0x05
+#endif
+#ifndef SUBLANG_FRENCH_MONACO
+#define SUBLANG_FRENCH_MONACO 0x06
+#endif
+#ifndef SUBLANG_FRENCH_WESTINDIES
+#define SUBLANG_FRENCH_WESTINDIES 0x07
+#endif
+#ifndef SUBLANG_FRENCH_REUNION
+#define SUBLANG_FRENCH_REUNION 0x08
+#endif
+#ifndef SUBLANG_FRENCH_CONGO
+#define SUBLANG_FRENCH_CONGO 0x09
+#endif
+#ifndef SUBLANG_FRENCH_SENEGAL
+#define SUBLANG_FRENCH_SENEGAL 0x0a
+#endif
+#ifndef SUBLANG_FRENCH_CAMEROON
+#define SUBLANG_FRENCH_CAMEROON 0x0b
+#endif
+#ifndef SUBLANG_FRENCH_COTEDIVOIRE
+#define SUBLANG_FRENCH_COTEDIVOIRE 0x0c
+#endif
+#ifndef SUBLANG_FRENCH_MALI
+#define SUBLANG_FRENCH_MALI 0x0d
+#endif
+#ifndef SUBLANG_FRENCH_MOROCCO
+#define SUBLANG_FRENCH_MOROCCO 0x0e
+#endif
+#ifndef SUBLANG_FRENCH_HAITI
+#define SUBLANG_FRENCH_HAITI 0x0f
+#endif
+#ifndef SUBLANG_GERMAN_LUXEMBOURG
+#define SUBLANG_GERMAN_LUXEMBOURG 0x04
+#endif
+#ifndef SUBLANG_GERMAN_LIECHTENSTEIN
+#define SUBLANG_GERMAN_LIECHTENSTEIN 0x05
+#endif
+#ifndef SUBLANG_KASHMIRI_INDIA
+#define SUBLANG_KASHMIRI_INDIA 0x02
+#endif
+#ifndef SUBLANG_MALAY_MALAYSIA
+#define SUBLANG_MALAY_MALAYSIA 0x01
+#endif
+#ifndef SUBLANG_MALAY_BRUNEI_DARUSSALAM
+#define SUBLANG_MALAY_BRUNEI_DARUSSALAM 0x02
+#endif
+#ifndef SUBLANG_NEPALI_INDIA
+#define SUBLANG_NEPALI_INDIA 0x02
+#endif
+#ifndef SUBLANG_PUNJABI_INDIA
+#define SUBLANG_PUNJABI_INDIA 0x01
+#endif
+#ifndef SUBLANG_ROMANIAN_ROMANIA
+#define SUBLANG_ROMANIAN_ROMANIA 0x01
+#endif
+#ifndef SUBLANG_SERBIAN_LATIN
+#define SUBLANG_SERBIAN_LATIN 0x02
+#endif
+#ifndef SUBLANG_SERBIAN_CYRILLIC
+#define SUBLANG_SERBIAN_CYRILLIC 0x03
+#endif
+#ifndef SUBLANG_SINDHI_INDIA
+#define SUBLANG_SINDHI_INDIA 0x00
+#endif
+#ifndef SUBLANG_SINDHI_PAKISTAN
+#define SUBLANG_SINDHI_PAKISTAN 0x01
+#endif
+#ifndef SUBLANG_SPANISH_GUATEMALA
+#define SUBLANG_SPANISH_GUATEMALA 0x04
+#endif
+#ifndef SUBLANG_SPANISH_COSTA_RICA
+#define SUBLANG_SPANISH_COSTA_RICA 0x05
+#endif
+#ifndef SUBLANG_SPANISH_PANAMA
+#define SUBLANG_SPANISH_PANAMA 0x06
+#endif
+#ifndef SUBLANG_SPANISH_DOMINICAN_REPUBLIC
+#define SUBLANG_SPANISH_DOMINICAN_REPUBLIC 0x07
+#endif
+#ifndef SUBLANG_SPANISH_VENEZUELA
+#define SUBLANG_SPANISH_VENEZUELA 0x08
+#endif
+#ifndef SUBLANG_SPANISH_COLOMBIA
+#define SUBLANG_SPANISH_COLOMBIA 0x09
+#endif
+#ifndef SUBLANG_SPANISH_PERU
+#define SUBLANG_SPANISH_PERU 0x0a
+#endif
+#ifndef SUBLANG_SPANISH_ARGENTINA
+#define SUBLANG_SPANISH_ARGENTINA 0x0b
+#endif
+#ifndef SUBLANG_SPANISH_ECUADOR
+#define SUBLANG_SPANISH_ECUADOR 0x0c
+#endif
+#ifndef SUBLANG_SPANISH_CHILE
+#define SUBLANG_SPANISH_CHILE 0x0d
+#endif
+#ifndef SUBLANG_SPANISH_URUGUAY
+#define SUBLANG_SPANISH_URUGUAY 0x0e
+#endif
+#ifndef SUBLANG_SPANISH_PARAGUAY
+#define SUBLANG_SPANISH_PARAGUAY 0x0f
+#endif
+#ifndef SUBLANG_SPANISH_BOLIVIA
+#define SUBLANG_SPANISH_BOLIVIA 0x10
+#endif
+#ifndef SUBLANG_SPANISH_EL_SALVADOR
+#define SUBLANG_SPANISH_EL_SALVADOR 0x11
+#endif
+#ifndef SUBLANG_SPANISH_HONDURAS
+#define SUBLANG_SPANISH_HONDURAS 0x12
+#endif
+#ifndef SUBLANG_SPANISH_NICARAGUA
+#define SUBLANG_SPANISH_NICARAGUA 0x13
+#endif
+#ifndef SUBLANG_SPANISH_PUERTO_RICO
+#define SUBLANG_SPANISH_PUERTO_RICO 0x14
+#endif
+#ifndef SUBLANG_SWEDISH_FINLAND
+#define SUBLANG_SWEDISH_FINLAND 0x02
+#endif
+#ifndef SUBLANG_TAMAZIGHT_ARABIC
+#define SUBLANG_TAMAZIGHT_ARABIC 0x01
+#endif
+#ifndef SUBLANG_TAMAZIGHT_LATIN
+#define SUBLANG_TAMAZIGHT_LATIN 0x02
+#endif
+#ifndef SUBLANG_TIGRINYA_ETHIOPIA
+#define SUBLANG_TIGRINYA_ETHIOPIA 0x00
+#endif
+#ifndef SUBLANG_TIGRINYA_ERITREA
+#define SUBLANG_TIGRINYA_ERITREA 0x01
+#endif
+#ifndef SUBLANG_URDU_PAKISTAN
+#define SUBLANG_URDU_PAKISTAN 0x01
+#endif
+#ifndef SUBLANG_URDU_INDIA
+#define SUBLANG_URDU_INDIA 0x02
+#endif
+#ifndef SUBLANG_UZBEK_LATIN
+#define SUBLANG_UZBEK_LATIN 0x01
+#endif
+#ifndef SUBLANG_UZBEK_CYRILLIC
+#define SUBLANG_UZBEK_CYRILLIC 0x02
+#endif
+
+/* Return an XPG style locale name
+ language[_territory[.codeset]][@modifier].
+ Don't even bother determining the codeset; it's not useful in this
+ context, because message catalogs are not specific to a single
+ codeset. The result must not be freed; it is statically
+ allocated. */
+static const char *
+my_nl_locale_name (const char *categoryname)
+{
+ const char *retval;
+ LCID lcid;
+ LANGID langid;
+ int primary, sub;
+
+ /* Let the user override the system settings through environment
+ variables, as on POSIX systems. */
+#ifndef HAVE_W32CE_SYSTEM
+ retval = getenv ("LC_ALL");
+ if (retval != NULL && retval[0] != '\0')
+ return retval;
+ retval = getenv (categoryname);
+ if (retval != NULL && retval[0] != '\0')
+ return retval;
+ retval = getenv ("LANG");
+ if (retval != NULL && retval[0] != '\0')
+ return retval;
+#endif /*!HAVE_W32CE_SYSTEM*/
+
+ /* Use native Win32 API locale ID. */
+#ifdef HAVE_W32CE_SYSTEM
+ lcid = GetSystemDefaultLCID ();
+#else
+ lcid = GetThreadLocale ();
+#endif
+
+ /* Strip off the sorting rules, keep only the language part. */
+ langid = LANGIDFROMLCID (lcid);
+
+ /* Split into language and territory part. */
+ primary = PRIMARYLANGID (langid);
+ sub = SUBLANGID (langid);
+
+ /* Dispatch on language.
+ See also http://www.unicode.org/unicode/onlinedat/languages.html .
+ For details about languages, see http://www.ethnologue.com/ . */
+ switch (primary)
+ {
+ case LANG_AFRIKAANS: return "af_ZA";
+ case LANG_ALBANIAN: return "sq_AL";
+ case LANG_AMHARIC: return "am_ET";
+ case LANG_ARABIC:
+ switch (sub)
+ {
+ case SUBLANG_ARABIC_SAUDI_ARABIA: return "ar_SA";
+ case SUBLANG_ARABIC_IRAQ: return "ar_IQ";
+ case SUBLANG_ARABIC_EGYPT: return "ar_EG";
+ case SUBLANG_ARABIC_LIBYA: return "ar_LY";
+ case SUBLANG_ARABIC_ALGERIA: return "ar_DZ";
+ case SUBLANG_ARABIC_MOROCCO: return "ar_MA";
+ case SUBLANG_ARABIC_TUNISIA: return "ar_TN";
+ case SUBLANG_ARABIC_OMAN: return "ar_OM";
+ case SUBLANG_ARABIC_YEMEN: return "ar_YE";
+ case SUBLANG_ARABIC_SYRIA: return "ar_SY";
+ case SUBLANG_ARABIC_JORDAN: return "ar_JO";
+ case SUBLANG_ARABIC_LEBANON: return "ar_LB";
+ case SUBLANG_ARABIC_KUWAIT: return "ar_KW";
+ case SUBLANG_ARABIC_UAE: return "ar_AE";
+ case SUBLANG_ARABIC_BAHRAIN: return "ar_BH";
+ case SUBLANG_ARABIC_QATAR: return "ar_QA";
+ }
+ return "ar";
+ case LANG_ARMENIAN: return "hy_AM";
+ case LANG_ASSAMESE: return "as_IN";
+ case LANG_AZERI:
+ switch (sub)
+ {
+ /* FIXME: Adjust this when Azerbaijani locales appear on Unix. */
+ case SUBLANG_AZERI_LATIN: return "az_AZ@latin";
+ case SUBLANG_AZERI_CYRILLIC: return "az_AZ@cyrillic";
+ }
+ return "az";
+ case LANG_BASQUE:
+ return "eu"; /* Ambiguous: could be "eu_ES" or "eu_FR". */
+ case LANG_BELARUSIAN: return "be_BY";
+ case LANG_BENGALI:
+ switch (sub)
+ {
+ case SUBLANG_BENGALI_INDIA: return "bn_IN";
+ case SUBLANG_BENGALI_BANGLADESH: return "bn_BD";
+ }
+ return "bn";
+ case LANG_BULGARIAN: return "bg_BG";
+ case LANG_BURMESE: return "my_MM";
+ case LANG_CAMBODIAN: return "km_KH";
+ case LANG_CATALAN: return "ca_ES";
+ case LANG_CHEROKEE: return "chr_US";
+ case LANG_CHINESE:
+ switch (sub)
+ {
+ case SUBLANG_CHINESE_TRADITIONAL: return "zh_TW";
+ case SUBLANG_CHINESE_SIMPLIFIED: return "zh_CN";
+ case SUBLANG_CHINESE_HONGKONG: return "zh_HK";
+ case SUBLANG_CHINESE_SINGAPORE: return "zh_SG";
+ case SUBLANG_CHINESE_MACAU: return "zh_MO";
+ }
+ return "zh";
+ case LANG_CROATIAN: /* LANG_CROATIAN == LANG_SERBIAN
+ * What used to be called Serbo-Croatian
+ * should really now be two separate
+ * languages because of political reasons.
+ * (Says tml, who knows nothing about Serbian
+ * or Croatian.)
+ * (I can feel those flames coming already.)
+ */
+ switch (sub)
+ {
+ case SUBLANG_DEFAULT: return "hr_HR";
+ case SUBLANG_SERBIAN_LATIN: return "sr_CS";
+ case SUBLANG_SERBIAN_CYRILLIC: return "sr_CS@cyrillic";
+ }
+ return "hr";
+ case LANG_CZECH: return "cs_CZ";
+ case LANG_DANISH: return "da_DK";
+ case LANG_DIVEHI: return "div_MV";
+ case LANG_DUTCH:
+ switch (sub)
+ {
+ case SUBLANG_DUTCH: return "nl_NL";
+ case SUBLANG_DUTCH_BELGIAN: /* FLEMISH, VLAAMS */ return "nl_BE";
+ }
+ return "nl";
+ case LANG_EDO: return "bin_NG";
+ case LANG_ENGLISH:
+ switch (sub)
+ {
+ /* SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. Heh. I thought
+ * English was the language spoken in England.
+ * Oh well.
+ */
+ case SUBLANG_ENGLISH_US: return "en_US";
+ case SUBLANG_ENGLISH_UK: return "en_GB";
+ case SUBLANG_ENGLISH_AUS: return "en_AU";
+ case SUBLANG_ENGLISH_CAN: return "en_CA";
+ case SUBLANG_ENGLISH_NZ: return "en_NZ";
+ case SUBLANG_ENGLISH_EIRE: return "en_IE";
+ case SUBLANG_ENGLISH_SOUTH_AFRICA: return "en_ZA";
+ case SUBLANG_ENGLISH_JAMAICA: return "en_JM";
+ case SUBLANG_ENGLISH_CARIBBEAN: return "en_GD"; /* Grenada? */
+ case SUBLANG_ENGLISH_BELIZE: return "en_BZ";
+ case SUBLANG_ENGLISH_TRINIDAD: return "en_TT";
+ case SUBLANG_ENGLISH_ZIMBABWE: return "en_ZW";
+ case SUBLANG_ENGLISH_PHILIPPINES: return "en_PH";
+ case SUBLANG_ENGLISH_INDONESIA: return "en_ID";
+ case SUBLANG_ENGLISH_HONGKONG: return "en_HK";
+ case SUBLANG_ENGLISH_INDIA: return "en_IN";
+ case SUBLANG_ENGLISH_MALAYSIA: return "en_MY";
+ case SUBLANG_ENGLISH_SINGAPORE: return "en_SG";
+ }
+ return "en";
+ case LANG_ESTONIAN: return "et_EE";
+ case LANG_FAEROESE: return "fo_FO";
+ case LANG_FARSI: return "fa_IR";
+ case LANG_FINNISH: return "fi_FI";
+ case LANG_FRENCH:
+ switch (sub)
+ {
+ case SUBLANG_FRENCH: return "fr_FR";
+ case SUBLANG_FRENCH_BELGIAN: /* WALLOON */ return "fr_BE";
+ case SUBLANG_FRENCH_CANADIAN: return "fr_CA";
+ case SUBLANG_FRENCH_SWISS: return "fr_CH";
+ case SUBLANG_FRENCH_LUXEMBOURG: return "fr_LU";
+ case SUBLANG_FRENCH_MONACO: return "fr_MC";
+ case SUBLANG_FRENCH_WESTINDIES: return "fr"; /* Caribbean? */
+ case SUBLANG_FRENCH_REUNION: return "fr_RE";
+ case SUBLANG_FRENCH_CONGO: return "fr_CG";
+ case SUBLANG_FRENCH_SENEGAL: return "fr_SN";
+ case SUBLANG_FRENCH_CAMEROON: return "fr_CM";
+ case SUBLANG_FRENCH_COTEDIVOIRE: return "fr_CI";
+ case SUBLANG_FRENCH_MALI: return "fr_ML";
+ case SUBLANG_FRENCH_MOROCCO: return "fr_MA";
+ case SUBLANG_FRENCH_HAITI: return "fr_HT";
+ }
+ return "fr";
+ case LANG_FRISIAN: return "fy_NL";
+ case LANG_FULFULDE: return "ful_NG";
+ case LANG_GAELIC:
+ switch (sub)
+ {
+ case 0x01: /* SCOTTISH */ return "gd_GB";
+ case 0x02: /* IRISH */ return "ga_IE";
+ }
+ return "C";
+ case LANG_GALICIAN: return "gl_ES";
+ case LANG_GEORGIAN: return "ka_GE";
+ case LANG_GERMAN:
+ switch (sub)
+ {
+ case SUBLANG_GERMAN: return "de_DE";
+ case SUBLANG_GERMAN_SWISS: return "de_CH";
+ case SUBLANG_GERMAN_AUSTRIAN: return "de_AT";
+ case SUBLANG_GERMAN_LUXEMBOURG: return "de_LU";
+ case SUBLANG_GERMAN_LIECHTENSTEIN: return "de_LI";
+ }
+ return "de";
+ case LANG_GREEK: return "el_GR";
+ case LANG_GUARANI: return "gn_PY";
+ case LANG_GUJARATI: return "gu_IN";
+ case LANG_HAUSA: return "ha_NG";
+ case LANG_HAWAIIAN:
+ /* FIXME: Do they mean Hawaiian ("haw_US", 1000 speakers)
+ or Hawaii Creole English ("cpe_US", 600000 speakers)? */
+ return "cpe_US";
+ case LANG_HEBREW: return "he_IL";
+ case LANG_HINDI: return "hi_IN";
+ case LANG_HUNGARIAN: return "hu_HU";
+ case LANG_IBIBIO: return "nic_NG";
+ case LANG_ICELANDIC: return "is_IS";
+ case LANG_IGBO: return "ibo_NG";
+ case LANG_INDONESIAN: return "id_ID";
+ case LANG_INUKTITUT: return "iu_CA";
+ case LANG_ITALIAN:
+ switch (sub)
+ {
+ case SUBLANG_ITALIAN: return "it_IT";
+ case SUBLANG_ITALIAN_SWISS: return "it_CH";
+ }
+ return "it";
+ case LANG_JAPANESE: return "ja_JP";
+ case LANG_KANNADA: return "kn_IN";
+ case LANG_KANURI: return "kau_NG";
+ case LANG_KASHMIRI:
+ switch (sub)
+ {
+ case SUBLANG_DEFAULT: return "ks_PK";
+ case SUBLANG_KASHMIRI_INDIA: return "ks_IN";
+ }
+ return "ks";
+ case LANG_KAZAK: return "kk_KZ";
+ case LANG_KONKANI:
+ /* FIXME: Adjust this when such locales appear on Unix. */
+ return "kok_IN";
+ case LANG_KOREAN: return "ko_KR";
+ case LANG_KYRGYZ: return "ky_KG";
+ case LANG_LAO: return "lo_LA";
+ case LANG_LATIN: return "la_VA";
+ case LANG_LATVIAN: return "lv_LV";
+ case LANG_LITHUANIAN: return "lt_LT";
+ case LANG_MACEDONIAN: return "mk_MK";
+ case LANG_MALAY:
+ switch (sub)
+ {
+ case SUBLANG_MALAY_MALAYSIA: return "ms_MY";
+ case SUBLANG_MALAY_BRUNEI_DARUSSALAM: return "ms_BN";
+ }
+ return "ms";
+ case LANG_MALAYALAM: return "ml_IN";
+ case LANG_MALTESE: return "mt_MT";
+ case LANG_MANIPURI:
+ /* FIXME: Adjust this when such locales appear on Unix. */
+ return "mni_IN";
+ case LANG_MARATHI: return "mr_IN";
+ case LANG_MONGOLIAN:
+ return "mn"; /* Ambiguous: could be "mn_CN" or "mn_MN". */
+ case LANG_NEPALI:
+ switch (sub)
+ {
+ case SUBLANG_DEFAULT: return "ne_NP";
+ case SUBLANG_NEPALI_INDIA: return "ne_IN";
+ }
+ return "ne";
+ case LANG_NORWEGIAN:
+ switch (sub)
+ {
+ case SUBLANG_NORWEGIAN_BOKMAL: return "no_NO";
+ case SUBLANG_NORWEGIAN_NYNORSK: return "nn_NO";
+ }
+ return "no";
+ case LANG_ORIYA: return "or_IN";
+ case LANG_OROMO: return "om_ET";
+ case LANG_PAPIAMENTU: return "pap_AN";
+ case LANG_PASHTO:
+ return "ps"; /* Ambiguous: could be "ps_PK" or "ps_AF". */
+ case LANG_POLISH: return "pl_PL";
+ case LANG_PORTUGUESE:
+ switch (sub)
+ {
+ case SUBLANG_PORTUGUESE: return "pt_PT";
+ /* Hmm. SUBLANG_PORTUGUESE_BRAZILIAN == SUBLANG_DEFAULT.
+ Same phenomenon as SUBLANG_ENGLISH_US == SUBLANG_DEFAULT. */
+ case SUBLANG_PORTUGUESE_BRAZILIAN: return "pt_BR";
+ }
+ return "pt";
+ case LANG_PUNJABI:
+ switch (sub)
+ {
+ case SUBLANG_PUNJABI_INDIA: return "pa_IN"; /* Gurmukhi script */
+ }
+ return "pa";
+ case LANG_RHAETO_ROMANCE: return "rm_CH";
+ case LANG_ROMANIAN:
+ switch (sub)
+ {
+ case SUBLANG_ROMANIAN_ROMANIA: return "ro_RO";
+ }
+ return "ro";
+ case LANG_RUSSIAN:
+ return "ru"; /* Ambiguous: could be "ru_RU" or "ru_UA" or "ru_MD". */
+ case LANG_SAAMI: /* actually Northern Sami */ return "se_NO";
+ case LANG_SANSKRIT: return "sa_IN";
+ case LANG_SINDHI:
+ switch (sub)
+ {
+ case SUBLANG_SINDHI_INDIA: return "sd_IN";
+ case SUBLANG_SINDHI_PAKISTAN: return "sd_PK";
+ }
+ return "sd";
+ case LANG_SINHALESE: return "si_LK";
+ case LANG_SLOVAK: return "sk_SK";
+ case LANG_SLOVENIAN: return "sl_SI";
+ case LANG_SOMALI: return "so_SO";
+ case LANG_SORBIAN:
+ /* FIXME: Adjust this when such locales appear on Unix. */
+ return "wen_DE";
+ case LANG_SPANISH:
+ switch (sub)
+ {
+ case SUBLANG_SPANISH: return "es_ES";
+ case SUBLANG_SPANISH_MEXICAN: return "es_MX";
+ case SUBLANG_SPANISH_MODERN:
+ return "es_ES@modern"; /* not seen on Unix */
+ case SUBLANG_SPANISH_GUATEMALA: return "es_GT";
+ case SUBLANG_SPANISH_COSTA_RICA: return "es_CR";
+ case SUBLANG_SPANISH_PANAMA: return "es_PA";
+ case SUBLANG_SPANISH_DOMINICAN_REPUBLIC: return "es_DO";
+ case SUBLANG_SPANISH_VENEZUELA: return "es_VE";
+ case SUBLANG_SPANISH_COLOMBIA: return "es_CO";
+ case SUBLANG_SPANISH_PERU: return "es_PE";
+ case SUBLANG_SPANISH_ARGENTINA: return "es_AR";
+ case SUBLANG_SPANISH_ECUADOR: return "es_EC";
+ case SUBLANG_SPANISH_CHILE: return "es_CL";
+ case SUBLANG_SPANISH_URUGUAY: return "es_UY";
+ case SUBLANG_SPANISH_PARAGUAY: return "es_PY";
+ case SUBLANG_SPANISH_BOLIVIA: return "es_BO";
+ case SUBLANG_SPANISH_EL_SALVADOR: return "es_SV";
+ case SUBLANG_SPANISH_HONDURAS: return "es_HN";
+ case SUBLANG_SPANISH_NICARAGUA: return "es_NI";
+ case SUBLANG_SPANISH_PUERTO_RICO: return "es_PR";
+ }
+ return "es";
+ case LANG_SUTU: return "bnt_TZ"; /* or "st_LS" or "nso_ZA"? */
+ case LANG_SWAHILI: return "sw_KE";
+ case LANG_SWEDISH:
+ switch (sub)
+ {
+ case SUBLANG_DEFAULT: return "sv_SE";
+ case SUBLANG_SWEDISH_FINLAND: return "sv_FI";
+ }
+ return "sv";
+ case LANG_SYRIAC: return "syr_TR"; /* An extinct language. */
+ case LANG_TAGALOG: return "tl_PH";
+ case LANG_TAJIK: return "tg_TJ";
+ case LANG_TAMAZIGHT:
+ switch (sub)
+ {
+ /* FIXME: Adjust this when Tamazight locales appear on Unix. */
+ case SUBLANG_TAMAZIGHT_ARABIC: return "ber_MA@arabic";
+ case SUBLANG_TAMAZIGHT_LATIN: return "ber_MA@latin";
+ }
+ return "ber_MA";
+ case LANG_TAMIL:
+ return "ta"; /* Ambiguous: could be "ta_IN" or "ta_LK" or "ta_SG". */
+ case LANG_TATAR: return "tt_RU";
+ case LANG_TELUGU: return "te_IN";
+ case LANG_THAI: return "th_TH";
+ case LANG_TIBETAN: return "bo_CN";
+ case LANG_TIGRINYA:
+ switch (sub)
+ {
+ case SUBLANG_TIGRINYA_ETHIOPIA: return "ti_ET";
+ case SUBLANG_TIGRINYA_ERITREA: return "ti_ER";
+ }
+ return "ti";
+ case LANG_TSONGA: return "ts_ZA";
+ case LANG_TSWANA: return "tn_BW";
+ case LANG_TURKISH: return "tr_TR";
+ case LANG_TURKMEN: return "tk_TM";
+ case LANG_UKRAINIAN: return "uk_UA";
+ case LANG_URDU:
+ switch (sub)
+ {
+ case SUBLANG_URDU_PAKISTAN: return "ur_PK";
+ case SUBLANG_URDU_INDIA: return "ur_IN";
+ }
+ return "ur";
+ case LANG_UZBEK:
+ switch (sub)
+ {
+ case SUBLANG_UZBEK_LATIN: return "uz_UZ";
+ case SUBLANG_UZBEK_CYRILLIC: return "uz_UZ@cyrillic";
+ }
+ return "uz";
+ case LANG_VENDA:
+ /* FIXME: It's not clear whether Venda has the ISO 639-2 two-letter code
+ "ve" or not.
+ http://www.loc.gov/standards/iso639-2/englangn.html has it, but
+ http://lcweb.loc.gov/standards/iso639-2/codechanges.html doesn't, */
+ return "ven_ZA"; /* or "ve_ZA"? */
+ case LANG_VIETNAMESE: return "vi_VN";
+ case LANG_WELSH: return "cy_GB";
+ case LANG_XHOSA: return "xh_ZA";
+ case LANG_YI: return "sit_CN";
+ case LANG_YIDDISH: return "yi_IL";
+ case LANG_YORUBA: return "yo_NG";
+ case LANG_ZULU: return "zu_ZA";
+ default: return "C";
+ }
+}
+
+/* localname.c from gettext END. */
+
+
+
+/* Support functions. */
+
+static __inline__ uint32_t
+do_swap_u32 (uint32_t i)
+{
+ return (i << 24) | ((i & 0xff00) << 8) | ((i >> 8) & 0xff00) | (i >> 24);
+}
+
+#define SWAPIT(flag, data) ((flag) ? do_swap_u32(data) : (data))
+
+
+/* We assume to have `unsigned long int' value with at least 32 bits. */
+#define HASHWORDBITS 32
+
+/* The so called `hashpjw' function by P.J. Weinberger
+ [see Aho/Sethi/Ullman, COMPILERS: Principles, Techniques and Tools,
+ 1986, 1987 Bell Telephone Laboratories, Inc.] */
+static __inline__ unsigned long
+hash_string( const char *str_param )
+{
+ unsigned long int hval, g;
+ const char *str = str_param;
+
+ hval = 0;
+ while (*str != '\0')
+ {
+ hval <<= 4;
+ hval += (unsigned long int) *str++;
+ g = hval & ((unsigned long int) 0xf << (HASHWORDBITS - 4));
+ if (g != 0)
+ {
+ hval ^= g >> (HASHWORDBITS - 8);
+ hval ^= g;
+ }
+ }
+ return hval;
+}
+
+
+/* Generic message catalog and gettext stuff. */
+
+/* The magic number of the GNU message catalog format. */
+#define MAGIC 0x950412de
+#define MAGIC_SWAPPED 0xde120495
+
+/* Revision number of the currently used .mo (binary) file format. */
+#define MO_REVISION_NUMBER 0
+
+
+/* Header for binary .mo file format. */
+struct mo_file_header
+{
+ /* The magic number. */
+ uint32_t magic;
+ /* The revision number of the file format. */
+ uint32_t revision;
+ /* The number of strings pairs. */
+ uint32_t nstrings;
+ /* Offset of table with start offsets of original strings. */
+ uint32_t orig_tab_offset;
+ /* Offset of table with start offsets of translation strings. */
+ uint32_t trans_tab_offset;
+ /* Size of hashing table. */
+ uint32_t hash_tab_size;
+ /* Offset of first hashing entry. */
+ uint32_t hash_tab_offset;
+};
+
+
+struct string_desc
+{
+ /* Length of addressed string. */
+ uint32_t length;
+ /* Offset of string in file. */
+ uint32_t offset;
+};
+
+
+struct overflow_space_s
+{
+ struct overflow_space_s *next;
+ uint32_t idx;
+ uint32_t length;
+ char d[1];
+};
+
+struct loaded_domain
+{
+ char *data;
+ char *data_native; /* Data mapped to the native version of the
+ string. (Allocated along with DATA). */
+ int must_swap;
+ uint16_t nstrings; /* Number of strings. */
+ uint16_t *mapped; /* Array of mapping indicators:
+ 0 := Not mapped (original utf8).
+ 1 := Mapped to native encoding in overflow space.
+ >=2 := Mapped to native encoding. The value
+ gives the length of the mapped string.
+ Because the terminating nul is included
+ in the length and an empty string is
+ not allowed, values are always > 1. */
+ struct overflow_space_s *overflow_space;
+ struct string_desc *orig_tab;
+ struct string_desc *trans_tab;
+ uint32_t hash_size;
+ uint32_t *hash_tab;
+};
+
+
+/* The list of domains we we are aware of. This list is protected by
+ the criticla section DOMAINLIST_ACCESS_CS. */
+static struct domainlist_s *domainlist;
+
+/* A critical section to guard access to the domainlist. */
+static CRITICAL_SECTION domainlist_access_cs;
+
+/* The name of the current domain. This is a malloced string. This
+ is a gobal variable which is not thread-safe. */
+static char *current_domainname;
+
+
+
+/* Constructor for this module. This can only be used if we are a
+ DLL. IF used as a static lib we can't control the process set; for
+ example it might be used with a main module which is not build with
+ mingw and thus does not know how to call the constructors. */
+#ifdef DLL_EXPORT
+static void module_init (void) __attribute__ ((__constructor__));
+#endif
+static void
+module_init (void)
+{
+ static int init_done;
+
+ if (!init_done)
+ {
+ InitializeCriticalSection (&domainlist_access_cs);
+ init_done = 1;
+ }
+}
+
+#ifndef DLL_EXPORT
+void
+_gpg_w32__init_gettext_module (void)
+{
+ module_init ();
+}
+#endif
+
+
+/* Free the domain data. */
+static void
+free_domain (struct loaded_domain *domain)
+{
+ struct overflow_space_s *os, *os2;
+
+ jnlib_free (domain->data);
+ jnlib_free (domain->mapped);
+ for (os = domain->overflow_space; os; os = os2)
+ {
+ os2 = os->next;
+ jnlib_free (os);
+ }
+ jnlib_free (domain);
+}
+
+
+static struct loaded_domain *
+load_domain (const char *filename)
+{
+ FILE *fp;
+ size_t size;
+ struct stat st;
+ struct mo_file_header *data = NULL;
+ struct loaded_domain *domain = NULL;
+ size_t to_read;
+ char *read_ptr;
+
+ fp = fopen (filename, "rb");
+ if (!fp)
+ {
+ return NULL;
+ }
+ if (fstat (fileno (fp), &st)
+ || (size = (size_t) st.st_size) != st.st_size
+ || size < sizeof (struct mo_file_header))
+ {
+ fclose (fp);
+ return NULL;
+ }
+
+ data = (2*size <= size)? NULL : jnlib_malloc (2*size);
+ if (!data)
+ {
+ fclose (fp);
+ return NULL;
+ }
+
+ to_read = size;
+ read_ptr = (char *) data;
+ do
+ {
+ long int nb = fread (read_ptr, 1, to_read, fp);
+ if (nb < to_read)
+ {
+ fclose (fp);
+ jnlib_free (data);
+ return NULL;
+ }
+ read_ptr += nb;
+ to_read -= nb;
+ }
+ while (to_read > 0);
+ fclose (fp);
+
+ /* Using the magic number we can test whether it really is a message
+ catalog file. */
+ if (data->magic != MAGIC && data->magic != MAGIC_SWAPPED)
+ {
+ /* The magic number is wrong: not a message catalog file. */
+ jnlib_free (data);
+ return NULL;
+ }
+
+ domain = jnlib_calloc (1, sizeof *domain);
+ if (!domain)
+ {
+ jnlib_free (data);
+ return NULL;
+ }
+ domain->data = (char *) data;
+ domain->data_native = (char *) data + size;
+ domain->must_swap = data->magic != MAGIC;
+
+ /* Fill in the information about the available tables. */
+ switch (SWAPIT (domain->must_swap, data->revision))
+ {
+ case MO_REVISION_NUMBER:
+ {
+ uint32_t nstrings;
+
+ /* Because we use 16 bit values for the mapping array, we
+ can't support more that 65534 strings (65535 would be okay,
+ but it is often used as a special value). A PO file with
+ that many translations is very unlikely given that GnuPG
+ with its very large number of strings has only about 1600
+ strings + variants. */
+ nstrings = SWAPIT (domain->must_swap, data->nstrings);
+ if (nstrings > 65534)
+ goto bailout;
+ domain->nstrings = nstrings;
+ domain->orig_tab = (struct string_desc *)
+ ((char *) data + SWAPIT (domain->must_swap, data->orig_tab_offset));
+ domain->trans_tab = (struct string_desc *)
+ ((char *) data + SWAPIT (domain->must_swap, data->trans_tab_offset));
+ domain->hash_size = SWAPIT (domain->must_swap, data->hash_tab_size);
+ domain->hash_tab = (uint32_t *)
+ ((char *) data + SWAPIT (domain->must_swap, data->hash_tab_offset));
+ }
+ break;
+
+ default: /* This is an invalid revision. */
+ goto bailout;
+ }
+
+ /* Allocate an array to keep track of code page mappings. */
+ domain->mapped = jnlib_calloc (domain->nstrings, sizeof *domain->mapped);
+ if (domain->mapped)
+ return domain; /* Okay. */
+
+ bailout:
+ jnlib_free (data);
+ jnlib_free (domain);
+ return NULL;
+}
+
+
+/* Return a malloced wide char string from an UTF-8 encoded input
+ string STRING. Caller must free this value. On failure returns
+ NULL. The result of calling this function with STRING set to NULL
+ is not defined. */
+static wchar_t *
+utf8_to_wchar (const char *string, size_t length, size_t *retlen)
+{
+ int n;
+ wchar_t *result;
+ size_t nbytes;
+
+ n = MultiByteToWideChar (CP_UTF8, 0, string, length, NULL, 0);
+ if (n < 0 || (n+1) <= 0)
+ return NULL;
+
+ nbytes = (size_t)(n+1) * sizeof(*result);
+ if (nbytes / sizeof(*result) != (n+1))
+ {
+ gpg_err_set_errno (ENOMEM);
+ return NULL;
+ }
+ result = jnlib_malloc (nbytes);
+ if (!result)
+ return NULL;
+
+ n = MultiByteToWideChar (CP_UTF8, 0, string, length, result, n);
+ if (n < 0)
+ {
+ jnlib_free (result);
+ return NULL;
+ }
+ *retlen = n;
+ return result;
+}
+
+
+/* Return a malloced string encoded in UTF-8 from the wide char input
+ string STRING. Caller must free this value. On failure returns
+ NULL. The result of calling this function with STRING set to NULL
+ is not defined. */
+static char *
+wchar_to_native (const wchar_t *string, size_t length, size_t *retlen)
+{
+ int n;
+ char *result;
+
+ n = WideCharToMultiByte (CP_ACP, 0, string, length, NULL, 0, NULL, NULL);
+ if (n < 0 || (n+1) <= 0)
+ return NULL;
+
+ result = jnlib_malloc (n+1);
+ if (!result)
+ return NULL;
+
+ n = WideCharToMultiByte (CP_ACP, 0, string, length, result, n, NULL, NULL);
+ if (n < 0)
+ {
+ jnlib_free (result);
+ return NULL;
+ }
+ *retlen = n;
+ return result;
+}
+
+
+/* Convert UTF8 to the native codepage. Caller must free the return value. */
+static char *
+utf8_to_native (const char *string, size_t length, size_t *retlen)
+{
+ wchar_t *wstring;
+ char *result;
+ size_t newlen;
+
+ wstring = utf8_to_wchar (string, length, &newlen);
+ if (wstring)
+ {
+ result = wchar_to_native (wstring, newlen, &newlen);
+ jnlib_free (wstring);
+ }
+ else
+ result = NULL;
+ *retlen = result? newlen : 0;
+ return result;
+}
+
+
+
+
+/* Specify that the DOMAINNAME message catalog will be found
+ in DIRNAME rather than in the system locale data base. */
+const char *
+_gpg_w32_bindtextdomain (const char *domainname, const char *dirname)
+{
+ const char *catval_full;
+ char *catval;
+ char *fname;
+ const char *retvalue;
+
+ if (!dirname)
+ {
+ struct domainlist_s *dl;
+
+ retvalue = NULL;
+ EnterCriticalSection (&domainlist_access_cs);
+ {
+ for (dl = domainlist; dl; dl = dl->next)
+ if (!strcmp (dl->name, domainname))
+ {
+ retvalue = dl->dname;
+ break;
+ }
+ }
+ LeaveCriticalSection (&domainlist_access_cs);
+ return retvalue;
+ }
+
+ /* DIRNAME is "$INSTALLDIR\share\locale". */
+
+ /* First find out the category value. */
+ catval = NULL;
+ catval_full = my_nl_locale_name ("LC_MESSAGES");
+
+ /* Normally we would have to loop over all returned locales and
+ search for the right file. See gettext intl/dcigettext.c for all
+ the gory details. Here, we only support the basic category, and
+ ignore everything else. */
+ if (catval_full)
+ {
+ char *p;
+
+ catval = jnlib_malloc (strlen (catval_full) + 1);
+ if (catval)
+ {
+ strcpy (catval, catval_full);
+ p = strchr (catval, '_');
+ if (p)
+ *p = '\0';
+ }
+ }
+ if (!catval)
+ return NULL;
+
+ /* Now build the filename string. The complete filename is this:
+ DIRNAME + \ + CATVAL + \LC_MESSAGES\ + DOMAINNAME + .mo */
+ {
+ int len = (strlen (dirname) + 1 + strlen (catval) + 13
+ + strlen (domainname) + 3 + 1);
+ char *p;
+
+ fname = jnlib_malloc (len);
+ if (!fname)
+ {
+ jnlib_free (catval);
+ return NULL;
+ }
+
+ p = fname;
+ strcpy (p, dirname);
+ p += strlen (dirname);
+ *(p++) = '\\';
+ strcpy (p, catval);
+ p += strlen (catval);
+ strcpy (p, "\\LC_MESSAGES\\");
+ p += 13;
+ strcpy (p, domainname);
+ p += strlen (domainname);
+ strcpy (p, ".mo");
+ }
+
+ jnlib_free (catval);
+
+ /* Store the domain information in the domainlist. */
+ {
+ struct domainlist_s *item, *dl;
+ char *rel_ptr1 = NULL;
+ char *rel_ptr2 = NULL;
+
+ item = jnlib_calloc (1, sizeof *dl + strlen (domainname));
+ if (!item)
+ {
+ jnlib_free (fname);
+ return NULL;
+ }
+ strcpy (item->name, domainname);
+ item->dname = jnlib_malloc (strlen (dirname) +1);
+ if(!item->dname)
+ {
+ jnlib_free (item);
+ jnlib_free (fname);
+ return NULL;
+ }
+ strcpy (item->dname, dirname);
+ retvalue = item->dname;
+
+ EnterCriticalSection (&domainlist_access_cs);
+ {
+ for (dl = domainlist; dl; dl = dl->next)
+ if (!strcmp (dl->name, domainname))
+ break;
+ if (!dl) /* First time called for this domainname. */
+ {
+ item->fname = fname;
+ fname = NULL;
+ item->next = domainlist;
+ domainlist = item;
+ item = NULL;
+ }
+ else /* Update only. */
+ {
+ rel_ptr1 = dl->fname;
+ dl->fname = fname;
+ fname = NULL;
+ rel_ptr2 = dl->dname;
+ dl->dname = item->dname;
+ item->dname = NULL;
+ }
+ }
+ LeaveCriticalSection (&domainlist_access_cs);
+
+ jnlib_free (item);
+ jnlib_free (rel_ptr1);
+ jnlib_free (rel_ptr2);
+ }
+
+ return retvalue;
+}
+
+
+
+
+static const char *
+get_plural (const char *data, size_t datalen, unsigned long nplural)
+{
+ const char *p;
+ int idx;
+
+ /* We only support the Germanic rule. */
+ idx = (nplural == 1? 0 : 1);
+
+ for (; idx; idx--)
+ {
+ p = strchr (data, 0) + 1;
+ if (p >= data+datalen)
+ return "ERROR in GETTEXT (bad plural entry)";
+ datalen -= (p-data);
+ data = p;
+ }
+ return data;
+}
+
+
+static const char*
+get_string (struct loaded_domain *domain, uint32_t idx,
+ int use_plural, unsigned long nplural)
+{
+ struct tls_space_s *tls = get_tls ();
+ struct overflow_space_s *os;
+ const char *trans; /* Pointer to the translated entry. */
+ size_t translen; /* Length of that entry. */
+
+ if (idx > 65534)
+ return "ERROR in GETTEXT (too many strings)";
+
+ if (tls->gt_use_utf8)
+ {
+ trans = (domain->data
+ + SWAPIT(domain->must_swap, domain->trans_tab[idx].offset));
+ translen = SWAPIT(domain->must_swap, domain->trans_tab[idx].length);
+ }
+ else if (!domain->mapped[idx])
+ {
+ /* Not yet mapped. Map from utf-8 to native encoding now. */
+ const char *p_utf8;
+ size_t plen_utf8, buflen;
+ char *buf;
+
+ p_utf8 = (domain->data
+ + SWAPIT(domain->must_swap, domain->trans_tab[idx].offset));
+ plen_utf8 = SWAPIT(domain->must_swap, domain->trans_tab[idx].length);
+
+ buf = utf8_to_native (p_utf8, plen_utf8, &buflen);
+ if (!buf)
+ {
+ trans = "ERROR in GETTEXT MALLOC";
+ translen = 0;
+ }
+ else if (buflen <= plen_utf8 && buflen > 1)
+ {
+ /* Copy into the DATA_NATIVE area. */
+ char *p_tmp;
+
+ p_tmp = (domain->data_native
+ + SWAPIT(domain->must_swap, domain->trans_tab[idx].offset));
+ memcpy (p_tmp, buf, buflen);
+ domain->mapped[idx] = buflen;
+ trans = p_tmp;
+ translen = buflen;
+ }
+ else
+ {
+ /* There is not enough space for the translation (or for
+ whatever reason an empty string is used): Store it in the
+ overflow_space and mark that in the mapped array.
+ Because UTF-8 strings are in general shorter than the
+ Windows 2 byte encodings, we expect that this won't
+ happen too often (if at all) and thus we use a linked
+ list to manage this space. */
+ os = jnlib_malloc (sizeof *os + buflen);
+ if (os)
+ {
+ os->idx = idx;
+ memcpy (os->d, buf, buflen);
+ os->length = buflen;
+ os->next = domain->overflow_space;
+ domain->overflow_space = os;
+ domain->mapped[idx] = 1;
+ trans = os->d;
+ translen = os->length;
+ }
+ else
+ {
+ trans = "ERROR in GETTEXT MALLOC";
+ translen = 0;
+ }
+ }
+ jnlib_free (buf);
+ }
+ else if (domain->mapped[idx] == 1)
+ {
+ /* The translated string is in the overflow_space. */
+ for (os=domain->overflow_space; os; os = os->next)
+ if (os->idx == idx)
+ break;
+ if (os)
+ {
+ trans = os->d;
+ translen = os->length;
+ }
+ else
+ {
+ trans = "ERROR in GETTEXT (overflow space)\n";
+ translen = 0;
+ }
+ }
+ else
+ {
+ trans = (domain->data_native
+ + SWAPIT(domain->must_swap, domain->trans_tab[idx].offset));
+ translen = domain->mapped[idx];
+ }
+
+ if (use_plural && translen)
+ return get_plural (trans, translen, nplural);
+ else
+ return trans;
+}
+
+
+static const char *
+do_gettext (const char *domainname,
+ const char *msgid, const char *msgid2, unsigned long nplural)
+{
+ struct domainlist_s *dl;
+ struct loaded_domain *domain;
+ int load_failed;
+ uint32_t top, bottom, nstr;
+ char *filename;
+
+ if (!domainname)
+ domainname = current_domainname? current_domainname : "";
+
+ /* FIXME: The whole locking stuff is a bit questionable because
+ gettext does not claim to be thread-safe. We need to investigate
+ this further. */
+
+ load_failed = 0;
+ domain = NULL;
+ filename = NULL;
+ EnterCriticalSection (&domainlist_access_cs);
+ {
+ for (dl = domainlist; dl; dl = dl->next)
+ if (!strcmp (dl->name, domainname))
+ {
+ load_failed = dl->load_failed;
+ domain = dl->domain;
+ break;
+ }
+ if (dl && !domain && !load_failed && dl->fname)
+ {
+ filename = jnlib_malloc (strlen (dl->fname) + 1);
+ if (filename)
+ strcpy (filename, dl->fname);
+ }
+ }
+ LeaveCriticalSection (&domainlist_access_cs);
+ if (!dl)
+ goto not_found; /* DOMAINNAME not bound. */
+ if (filename)
+ {
+ /* No attempt so far to load the MO file. Try now. */
+ int updated = 0;
+
+ domain = load_domain (filename);
+ jnlib_free (filename);
+ filename = NULL;
+ EnterCriticalSection (&domainlist_access_cs);
+ {
+ for (dl = domainlist; dl; dl = dl->next)
+ if (!strcmp (dl->name, domainname))
+ {
+ if (domain)
+ dl->domain = domain;
+ else
+ dl->load_failed = 1;
+ updated = 1;
+ break;
+ }
+ }
+ LeaveCriticalSection (&domainlist_access_cs);
+ if (!updated)
+ {
+ /* Ooops - lost the domain. */
+ free_domain (domain);
+ domain = NULL;
+ }
+ }
+
+ if (!domain)
+ goto not_found; /* No MO file. */
+
+ /* First try to use the hash table. */
+ if (domain->hash_size > 2 && domain->hash_tab)
+ {
+ /* Use the hashing table. */
+ uint32_t len = strlen (msgid);
+ uint32_t hash_val = hash_string (msgid);
+ uint32_t idx = hash_val % domain->hash_size;
+ uint32_t incr = 1 + (hash_val % (domain->hash_size - 2));
+
+ while ( (nstr = SWAPIT (domain->must_swap, domain->hash_tab[idx])) )
+ {
+ nstr--;
+ if (nstr < domain->nstrings
+ && SWAPIT(domain->must_swap,
+ domain->orig_tab[nstr].length) >= len
+ && !strcmp (msgid, (domain->data
+ + SWAPIT(domain->must_swap,
+ domain->orig_tab[nstr].offset))))
+ {
+ return get_string (domain, nstr, !!msgid2, nplural);
+ }
+
+ if (idx >= domain->hash_size - incr)
+ idx -= domain->hash_size - incr;
+ else
+ idx += incr;
+ }
+ }
+
+ /* Now we try the default method: binary search in the sorted array
+ of messages. */
+ bottom = 0;
+ top = domain->nstrings;
+ while (bottom < top)
+ {
+ int cmp_val;
+
+ nstr = (bottom + top) / 2;
+ cmp_val = strcmp (msgid, (domain->data
+ + SWAPIT(domain->must_swap,
+ domain->orig_tab[nstr].offset)));
+ if (cmp_val < 0)
+ top = nstr;
+ else if (cmp_val > 0)
+ bottom = nstr + 1;
+ else
+ {
+ return get_string (domain, nstr, !!msgid2, nplural);
+ }
+ }
+
+ not_found:
+ /* We use the standard Germanic rule if plural has been requested. */
+ return msgid2? (nplural == 1? msgid : msgid2) : msgid;
+}
+
+
+const char *
+_gpg_w32_textdomain (const char *domainname)
+{
+ char *string;
+
+ if (!domainname)
+ {
+ if (!current_domainname)
+ gpg_err_set_errno (0);
+ }
+ else
+ {
+ string = malloc (strlen (domainname) + 1);
+ if (!string)
+ return NULL;
+ strcpy (string, domainname);
+ current_domainname = string;
+ }
+ return current_domainname;
+}
+
+
+/* A direct implementation of gettext instead of a macro calling
+ dngettext. This is so that the caller does not need to push dummy
+ values on the stack. The used domain is the first one registered
+ with bindtextdomain. */
+const char *
+_gpg_w32_gettext (const char *msgid)
+{
+ return do_gettext (NULL, msgid, NULL, 0);
+}
+
+
+/* A direct implementation of dgettext instead of a macro calling
+ dngettext. This is so that the caller does not need to push dummy
+ values on the stack. */
+const char *
+_gpg_w32_dgettext (const char *domainname, const char *msgid)
+{
+ return do_gettext (domainname, msgid, NULL, 0);
+}
+
+
+/* Our implementation of dngettext. This is the most genereic
+ function we have; a macro implements ngettext. */
+const char *
+_gpg_w32_dngettext (const char *domainname, const char *msgid1,
+ const char *msgid2, unsigned long int n)
+{
+ /* We use the simple Germanic plural rule. */
+ return do_gettext (domainname, msgid1, msgid2, n);
+}
+
+
+/* Return the locale name as used by gettext. The return value will
+ never be NULL. */
+const char *
+_gpg_w32_gettext_localename (void)
+{
+ const char *s;
+
+ s = my_nl_locale_name ("LC_MESSAGES");
+ return s? s:"";
+}
+
+
+/* With a VALUE of 1 switch the gettext functions into utf8 mode.
+ That is the strings are returned without translation to the native
+ charset. A VALUE of 0 switches back to translated strings. A VALUE
+ of -1 returns the current value. */
+int
+_gpg_w32_gettext_use_utf8 (int value)
+{
+ struct tls_space_s *tls = get_tls ();
+ int last = tls->gt_use_utf8;
+ if (value != -1)
+ tls->gt_use_utf8 = value;
+ return last;
+}
+
+
+#ifdef TEST
+int
+main (int argc, char **argv)
+{
+ const char atext1[] =
+ "Warning: You have entered an insecure passphrase.%%0A"
+ "A passphrase should be at least %u character long.";
+ const char atext2[] =
+ "Warning: You have entered an insecure passphrase.%%0A"
+ "A passphrase should be at least %u characters long.";
+
+ if (argc)
+ {
+ argc--;
+ argv++;
+ }
+
+ _gpg_err_w32_bindtextdomain ("gnupg2", "c:/programme/gnu/gnupg/share/locale");
+
+ printf ("locale is `%s'\n", _gpg_err_w32_gettext_localename ());
+ fputs ("text with N=1:\n", stdout);
+ fputs (_gpg_err_w32_ngettext (atext1, atext2, 1), stdout);
+ fputs ("\n\ntext with N=2:\n", stdout);
+ fputs (_gpg_err_w32_ngettext (atext1, atext2, 2), stdout);
+ fputs ("\nready\n", stdout);
+
+ return 0;
+}
+/*
+ * Local Variables:
+ * compile-command: "i586-mingw32msvc-gcc -DTEST -Wall -g w32-gettext.c"
+ * End:
+ */
+#endif /*TEST*/
diff --git a/libgpg-error-1.10/src/w32ce-add.h b/libgpg-error-1.10/src/w32ce-add.h
new file mode 100644
index 0000000..c6207bb
--- /dev/null
+++ b/libgpg-error-1.10/src/w32ce-add.h
@@ -0,0 +1,8 @@
+## w32ce-add.h - Snippet to be be included into gpg-error.h.
+## (Comments are indicated by a double hash mark)
+
+/* Substitute for strerror - this one is thread safe. */
+char *_gpg_w32ce_strerror (int err);
+#ifdef GPG_ERR_ENABLE_ERRNO_MACROS
+# define strerror(a) _gpg_w32ce_strerror (a)
+#endif
diff --git a/libgpg-error-1.10/tests/Makefile.am b/libgpg-error-1.10/tests/Makefile.am
new file mode 100644
index 0000000..be63260
--- /dev/null
+++ b/libgpg-error-1.10/tests/Makefile.am
@@ -0,0 +1,35 @@
+# Makefile.am for libgpg-error/tests.
+# Copyright (C) 2003 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+## Process this file with automake to produce Makefile.in
+
+if HAVE_W32CE_SYSTEM
+extra_includes = -idirafter $(top_builddir)/src/gpg-extra
+else
+extra_includes =
+endif
+
+
+TESTS = t-strerror t-syserror
+
+INCLUDES = -I$(top_builddir)/src $(extra_includes)
+
+LDADD = ../src/libgpg-error.la
+
+noinst_PROGRAMS = $(TESTS)
diff --git a/libgpg-error-1.10/tests/Makefile.in b/libgpg-error-1.10/tests/Makefile.in
new file mode 100644
index 0000000..8f01f17
--- /dev/null
+++ b/libgpg-error-1.10/tests/Makefile.in
@@ -0,0 +1,592 @@
+# Makefile.in generated by automake 1.10.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am for libgpg-error/tests.
+# Copyright (C) 2003 g10 Code GmbH
+#
+# This file is part of libgpg-error.
+#
+# libgpg-error is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# libgpg-error is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+TESTS = t-strerror$(EXEEXT) t-syserror$(EXEEXT)
+noinst_PROGRAMS = $(am__EXEEXT_1)
+subdir = tests
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
+ $(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/iconv.m4 \
+ $(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+ $(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+ $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+ $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+ $(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+am__EXEEXT_1 = t-strerror$(EXEEXT) t-syserror$(EXEEXT)
+PROGRAMS = $(noinst_PROGRAMS)
+t_strerror_SOURCES = t-strerror.c
+t_strerror_OBJECTS = t-strerror.$(OBJEXT)
+t_strerror_LDADD = $(LDADD)
+t_strerror_DEPENDENCIES = ../src/libgpg-error.la
+t_syserror_SOURCES = t-syserror.c
+t_syserror_OBJECTS = t-syserror.$(OBJEXT)
+t_syserror_LDADD = $(LDADD)
+t_syserror_DEPENDENCIES = ../src/libgpg-error.la
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = t-strerror.c t-syserror.c
+DIST_SOURCES = t-strerror.c t-syserror.c
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_FILEVERSION = @BUILD_FILEVERSION@
+BUILD_TIMESTAMP = @BUILD_TIMESTAMP@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CC_FOR_BUILD = @CC_FOR_BUILD@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GPG_ERROR_CONFIG_CFLAGS = @GPG_ERROR_CONFIG_CFLAGS@
+GPG_ERROR_CONFIG_ISUBDIRAFTER = @GPG_ERROR_CONFIG_ISUBDIRAFTER@
+GPG_ERROR_CONFIG_LIBS = @GPG_ERROR_CONFIG_LIBS@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBGPG_ERROR_LT_AGE = @LIBGPG_ERROR_LT_AGE@
+LIBGPG_ERROR_LT_CURRENT = @LIBGPG_ERROR_LT_CURRENT@
+LIBGPG_ERROR_LT_REVISION = @LIBGPG_ERROR_LT_REVISION@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+RC = @RC@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+@HAVE_W32CE_SYSTEM_FALSE@extra_includes =
+@HAVE_W32CE_SYSTEM_TRUE@extra_includes = -idirafter $(top_builddir)/src/gpg-extra
+INCLUDES = -I$(top_builddir)/src $(extra_includes)
+LDADD = ../src/libgpg-error.la
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu tests/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+clean-noinstPROGRAMS:
+ @list='$(noinst_PROGRAMS)'; for p in $$list; do \
+ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f $$p $$f"; \
+ rm -f $$p $$f ; \
+ done
+t-strerror$(EXEEXT): $(t_strerror_OBJECTS) $(t_strerror_DEPENDENCIES)
+ @rm -f t-strerror$(EXEEXT)
+ $(LINK) $(t_strerror_OBJECTS) $(t_strerror_LDADD) $(LIBS)
+t-syserror$(EXEEXT): $(t_syserror_OBJECTS) $(t_syserror_DEPENDENCIES)
+ @rm -f t-syserror$(EXEEXT)
+ $(LINK) $(t_syserror_OBJECTS) $(t_syserror_LDADD) $(LIBS)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-strerror.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/t-syserror.Po@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in files) print i; }; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list=' $(TESTS) '; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *[\ \ ]$$tst[\ \ ]*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *[\ \ ]$$tst[\ \ ]*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$all" -eq 1; then \
+ tests="test"; \
+ All=""; \
+ else \
+ tests="tests"; \
+ All="All "; \
+ fi; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="$$All$$all $$tests passed"; \
+ else \
+ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
+ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all $$tests failed"; \
+ else \
+ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
+ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ if test "$$skip" -eq 1; then \
+ skipped="($$skip test was not run)"; \
+ else \
+ skipped="($$skip tests were not run)"; \
+ fi; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
+ mostlyclean-am
+
+distclean: distclean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-info: install-info-am
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-ps: install-ps-am
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -rf ./$(DEPDIR)
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am:
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-TESTS check-am clean \
+ clean-generic clean-libtool clean-noinstPROGRAMS ctags \
+ distclean distclean-compile distclean-generic \
+ distclean-libtool distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-dvi install-dvi-am install-exec \
+ install-exec-am install-html install-html-am install-info \
+ install-info-am install-man install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags uninstall uninstall-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/libgpg-error-1.10/tests/t-strerror.c b/libgpg-error-1.10/tests/t-strerror.c
new file mode 100644
index 0000000..e02b302
--- /dev/null
+++ b/libgpg-error-1.10/tests/t-strerror.c
@@ -0,0 +1,63 @@
+/* t-strerror.c - Regression test.
+ Copyright (C) 2003 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpgme-error; if not, write to the Free
+ Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#if HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#include <gpg-error.h>
+
+int
+main (int argc, char *argv[])
+{
+ if (argc > 1)
+ {
+ int i = 1;
+ while (i + 1 < argc)
+ {
+ gpg_error_t err = gpg_err_make (atoi (argv[i]), atoi (argv[i + 1]));
+ printf ("%s: %s\n", gpg_strsource (err), gpg_strerror (err));
+ i += 2;
+ }
+ }
+ else
+ {
+ struct
+ {
+ gpg_err_source_t src;
+ gpg_err_code_t code;
+ } list[] = { { 0, 0 }, { 1, 201 }, { 2, 2 }, { 3, 102 },
+ { 4, 100 }, { 5, 99 }, { 6, 110 }, { 7, 7 }, { 8, 888 } };
+ int i = 0;
+
+ while (i < sizeof (list) / sizeof (list[0]))
+ {
+ gpg_error_t err = gpg_err_make (list[i].src, list[i].code);
+ printf ("%s: %s\n", gpg_strsource (err), gpg_strerror (err));
+ i++;
+ }
+ }
+ return 0;
+}
diff --git a/libgpg-error-1.10/tests/t-syserror.c b/libgpg-error-1.10/tests/t-syserror.c
new file mode 100644
index 0000000..25de86f
--- /dev/null
+++ b/libgpg-error-1.10/tests/t-syserror.c
@@ -0,0 +1,84 @@
+/* t-syserror.c - System error specific regression test.
+ Copyright (C) 2006 g10 Code GmbH
+
+ This file is part of libgpg-error.
+
+ libgpg-error is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public License
+ as published by the Free Software Foundation; either version 2.1 of
+ the License, or (at your option) any later version.
+
+ libgpg-error is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with libgpgme-error; if not, write to the Free
+ Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ 02110-1301, USA. */
+
+
+#if HAVE_CONFIG_H
+#include <config.h>
+#endif
+
+#include <stdio.h>
+#if HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <errno.h>
+
+#include <gpg-error.h>
+
+int
+main (int argc, char *argv[])
+{
+ FILE *fp;
+ int save_errno;
+ gpg_err_code_t ec;
+
+ fp = fopen ("/does-not-exist/110761/nowhere.foo", "r");
+ if (fp)
+ {
+ fclose (fp);
+ fp = fopen (" no this file does not exists foo 4711", "r");
+ }
+ if (fp)
+ {
+ fprintf (stderr, "unable to run test\n");
+ return 1;
+ }
+ save_errno = errno;
+
+ ec = gpg_err_code_from_syserror ();
+ if (ec != GPG_ERR_ENOENT)
+ {
+ fprintf (stderr, "fopen failed with bad code: %d\n", save_errno);
+ return 1;
+ }
+
+ if (ec != gpg_err_code_from_errno (save_errno))
+ {
+ fprintf (stderr, "oops at %d\n",__LINE__);
+ return 1;
+ }
+
+ gpg_err_set_errno (0);
+
+ ec = gpg_err_code_from_syserror ();
+ if (ec != GPG_ERR_MISSING_ERRNO)
+ {
+ fprintf (stderr, "oops at %d\n",__LINE__);
+ return 1;
+ }
+
+ if ( gpg_err_code_from_errno (0) )
+ {
+ fprintf (stderr, "oops at %d\n",__LINE__);
+ return 1;
+ }
+
+
+ return 0;
+}
diff --git a/libgpg-error.tar.bz2 b/libgpg-error.tar.bz2
new file mode 100644
index 0000000..d8aab4b
--- /dev/null
+++ b/libgpg-error.tar.bz2
Binary files differ
diff --git a/libgpg-error.url b/libgpg-error.url
new file mode 100644
index 0000000..193e93e
--- /dev/null
+++ b/libgpg-error.url
@@ -0,0 +1 @@
+ftp://ftp.gnupg.org/gcrypt/libgpg-error/libgpg-error-1.10.tar.bz2
diff --git a/libgpg-error.version b/libgpg-error.version
new file mode 100644
index 0000000..c044b1a
--- /dev/null
+++ b/libgpg-error.version
@@ -0,0 +1 @@
+1.10
