| Sat Dec 30 21:30 2000 Gerard Roudier |
| * version sym-2.1.0-20001230 |
| - Initial release of SYM-2. |
| |
| Mon Jan 08 21:30 2001 Gerard Roudier |
| * version sym-2.1.1-20010108 |
| - Change a couple of defines containing ncr or NCR by their |
| equivalent containing sym or SYM instead. |
| |
| Sun Jan 14 22:30 2001 Gerard Roudier |
| * version sym-2.1.2-20010114 |
| - Fix a couple of printfs: |
| * Add the target number to the display of transfer parameters. |
| * Make the display of TCQ and queue depth clearer. |
| |
| Wed Jan 17 23:30 2001 Gerard Roudier |
| * version sym-2.1.3-20010117 |
| - Wrong residual values were returned in some situations. |
| This broke cdrecord with linux-2.4.0, for example. |
| |
| Sat Jan 20 18:00 2001 Gerard Roudier |
| * version sym-2.1.4-20010120 |
| - Add year 2001 to Copyright. |
| - A tiny bug in the dma memory freeing path has been fixed. |
| (Driver unload failed with a bad address reference). |
| |
| Wed Jan 24 21:00 2001 Gerard Roudier |
| * version sym-2.1.5-20010124 |
| - Make the driver work under Linux-2.4.x when statically linked |
| with the kernel. |
| - Check against memory allocation failure for SCRIPTZ and add the |
| missing free of this memory on instance detach. |
| - Check against GPIO3 pulled low for HVD controllers (driver did |
| just the opposite). |
| Misdetection of BUS mode was triggered on module reload only, |
| since BIOS settings were trusted instead on first load. |
| |
| Wed Feb 7 21:00 2001 Gerard Roudier |
| * version sym-2.1.6-20010207 |
| - Call pci_enable_device() as wished by kernel maintainers. |
| - Change the sym_queue_scsiio() interface. |
| This is intended to simplify portability. |
| - Move the code intended to deal with the dowloading of SCRIPTS |
| from SCRIPTS :) in the patch method (was wrongly placed in |
| the SCRIPTS setup method). |
| - Add a missing cpu_to_scr() (np->abort_tbl.addr) |
| - Remove a wrong cpu_to_scr() (np->targtbl_ba) |
| - Cleanup a bit the PPR failure recovery code. |
| |
| Sat Mar 3 21:00 2001 Gerard Roudier |
| - Add option SYM_OPT_ANNOUNCE_TRANSFER_RATE and move the |
| corresponding code to file sym_misc.c. |
| Also move the code that sniffes INQUIRY to sym_misc.c. |
| This allows to share the corresponding code with NetBSD |
| without polluating the core driver source (sym_hipd.c). |
| - Add optionnal code that handles IO timeouts from the driver. |
| (not used under Linux, but required for NetBSD) |
| - Donnot assume any longer that PAGE_SHIFT and PAGE_SIZE are |
| defined at compile time, as at least NetBSD uses variables |
| in memory for that. |
| - Refine a work-around for the C1010-33 that consists in |
| disabling internal LOAD/STORE. Was applied up to revision 1. |
| Is now only applied to revision 0. |
| - Some code reorganisations due to code moves between files. |
| |
| Tues Apr 10 21:00 2001 Gerard Roudier |
| * version sym-2.1.9-20010412 |
| - Reset 53C896 and 53C1010 chip according to the manual. |
| (i.e.: set the ABRT bit in ISTAT if SCRIPTS are running) |
| - Set #LUN in request sense only if scsi version <= 2 and |
| #LUN <= 7. |
| - Set busy_itl in LCB to 1 if the LCB is allocated and a |
| SCSI command is active. This is a simplification. |
| - In sym_hcb_free(), do not scan the free_ccbq if no CCBs |
| has been allocated. This fixes a panic if attach failed. |
| - Add DT/ST (double/simple transition) in the transfer |
| negotiation announce. |
| - Forces the max number of tasks per LUN to at least 64. |
| - Use pci_set_dma_mask() for linux-2.4.3 and above. |
| - A couple of comments fixes. |
| |
| Wed May 22:00 2001 Gerard Roudier |
| * version sym-2.1.10-20010509 |
| - Mask GPCNTL against 0x1c (was 0xfc) for the reading of the NVRAM. |
| This ensure LEDC bit will not be set on 896 and later chips. |
| Fix sent by Chip Salzenberg <chip@perlsupport.com>. |
| - Define the number of PQS BUSes supported. |
| Fix sent by Stig Telfer <stig@api-networks.com> |
| - Miscellaneous common code rearrangements due to NetBSD accel |
| ioctl support, without impact on Linux (hopefully). |
| |
| Mon July 2 12:00 2001 Gerard Roudier |
| * version sym-2.1.11-20010702 |
| - Add Tekram 390 U2B/U2W SCSI LED handling. |
| Submitted by Chip Salzenberg <chip@valinux.com> |
| - Add call to scsi_set_pci_device() for kernels >= 2.4.4. |
| - Check pci dma mapping failures and complete the IO with some |
| error when such mapping fails. |
| - Fill in instance->max_cmd_len for kernels > 2.4.0. |
| - A couple of tiny fixes ... |
| |
| Sun Sep 9 18:00 2001 Gerard Roudier |
| * version sym-2.1.12-20010909 |
| - Change my email address. |
| - Add infrastructure for the forthcoming 64 bit DMA addressing support. |
| (Based on PCI 64 bit patch from David S. Miller) |
| - Donnot use anymore vm_offset_t type. |
| |
| Sat Sep 15 20:00 2001 Gerard Roudier |
| * version sym-2.1.13-20010916 |
| - Add support for 64 bit DMA addressing using segment registers. |
| 16 registers for up to 4 GB x 16 -> 64 GB. |
| |
| Sat Sep 22 12:00 2001 Gerard Roudier |
| * version sym-2.1.14-20010922 |
| - Complete rewrite of the eh handling. The driver is now using a |
| semaphore in order to behave synchronously as required by the eh |
| threads. A timer is also used to prevent from waiting indefinitely. |
| |
| Sun Sep 30 17:00 2001 Gerard Roudier |
| * version sym-2.1.15-20010930 |
| - Include <linux/module.h> unconditionnaly as expected by latest |
| kernels. |
| - Use del_timer_sync() for recent kernels to kill the driver timer |
| on module release. |
| |
| Sun Oct 28 15:00 2001 Gerard Roudier |
| * version sym-2.1.16-20011028 |
| - Slightly simplify driver configuration. |
| - Prepare a new patch against linux-2.4.13. |
| |
| Sat Nov 17 10:00 2001 Gerard Roudier |
| * version sym-2.1.17 |
| - Fix a couple of gcc/gcc3 warnings. |
| - Allocate separately from the HCB the array for CCBs hashed by DSA. |
| All driver memory allocations are now not greater than 1 PAGE |
| even on PPC64 / 4KB PAGE surprising setup. |
| |
| Sat Dec 01 18:00 2001 Gerard Roudier |
| * version sym-2.1.17a |
| - Use u_long instead of U32 for the IO base cookie. This is more |
| consistent with what archs are expecting. |
| - Use MMIO per default for Power PC instead of some fake normal IO, |
| as Paul Mackerras stated that MMIO works fine now on this arch. |
