| # arch/arm/mach-exynos/Kconfig | |
| # | |
| # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. | |
| # http://www.samsung.com/ | |
| # | |
| # Licensed under GPLv2 | |
| # Configuration options for the EXYNOS4 | |
| if ARCH_EXYNOS | |
| menu "SAMSUNG EXYNOS SoCs Support" | |
| config ARCH_EXYNOS4 | |
| bool "SAMSUNG EXYNOS4" | |
| default y | |
| select HAVE_ARM_SCU if SMP | |
| select HAVE_SMP | |
| select MIGHT_HAVE_CACHE_L2X0 | |
| help | |
| Samsung EXYNOS4 SoCs based systems | |
| config ARCH_EXYNOS5 | |
| bool "SAMSUNG EXYNOS5" | |
| select HAVE_ARM_SCU if SMP | |
| select HAVE_SMP | |
| help | |
| Samsung EXYNOS5 (Cortex-A15) SoC based systems | |
| comment "EXYNOS SoCs" | |
| config CPU_EXYNOS4210 | |
| bool "SAMSUNG EXYNOS4210" | |
| default y | |
| depends on ARCH_EXYNOS4 | |
| select ARM_CPU_SUSPEND if PM | |
| select PM_GENERIC_DOMAINS | |
| select S5P_PM if PM | |
| select S5P_SLEEP if PM | |
| select SAMSUNG_DMADEV | |
| help | |
| Enable EXYNOS4210 CPU support | |
| config SOC_EXYNOS4212 | |
| bool "SAMSUNG EXYNOS4212" | |
| default y | |
| depends on ARCH_EXYNOS4 | |
| select S5P_PM if PM | |
| select S5P_SLEEP if PM | |
| select SAMSUNG_DMADEV | |
| help | |
| Enable EXYNOS4212 SoC support | |
| config SOC_EXYNOS4412 | |
| bool "SAMSUNG EXYNOS4412" | |
| default y | |
| depends on ARCH_EXYNOS4 | |
| select SAMSUNG_DMADEV | |
| help | |
| Enable EXYNOS4412 SoC support | |
| config SOC_EXYNOS5250 | |
| bool "SAMSUNG EXYNOS5250" | |
| default y | |
| depends on ARCH_EXYNOS5 | |
| select PM_GENERIC_DOMAINS if PM | |
| select S5P_PM if PM | |
| select S5P_SLEEP if PM | |
| select S5P_DEV_MFC | |
| select SAMSUNG_DMADEV | |
| help | |
| Enable EXYNOS5250 SoC support | |
| config SOC_EXYNOS5440 | |
| bool "SAMSUNG EXYNOS5440" | |
| default y | |
| depends on ARCH_EXYNOS5 | |
| select ARCH_HAS_OPP | |
| select ARM_ARCH_TIMER | |
| select AUTO_ZRELADDR | |
| select PINCTRL | |
| select PINCTRL_EXYNOS5440 | |
| select PM_OPP | |
| help | |
| Enable EXYNOS5440 SoC support | |
| config EXYNOS_ATAGS | |
| bool "ATAGS based boot for EXYNOS (deprecated)" | |
| depends on !ARCH_MULTIPLATFORM | |
| depends on ATAGS | |
| default y | |
| help | |
| The EXYNOS platform is moving towards being completely probed | |
| through device tree. This enables support for board files using | |
| the traditional ATAGS boot format. | |
| Note that this option is not available for multiplatform builds. | |
| if EXYNOS_ATAGS | |
| config EXYNOS_DEV_DMA | |
| bool | |
| help | |
| Compile in amba device definitions for DMA controller | |
| config EXYNOS4_DEV_AHCI | |
| bool | |
| help | |
| Compile in platform device definitions for AHCI | |
| config EXYNOS4_SETUP_FIMD0 | |
| bool | |
| help | |
| Common setup code for FIMD0. | |
| config EXYNOS4_DEV_USB_OHCI | |
| bool | |
| help | |
| Compile in platform device definition for USB OHCI | |
| config EXYNOS4_SETUP_I2C1 | |
| bool | |
| help | |
| Common setup code for i2c bus 1. | |
| config EXYNOS4_SETUP_I2C2 | |
| bool | |
| help | |
| Common setup code for i2c bus 2. | |
| config EXYNOS4_SETUP_I2C3 | |
| bool | |
| help | |
| Common setup code for i2c bus 3. | |
| config EXYNOS4_SETUP_I2C4 | |
| bool | |
| help | |
| Common setup code for i2c bus 4. | |
| config EXYNOS4_SETUP_I2C5 | |
| bool | |
| help | |
| Common setup code for i2c bus 5. | |
| config EXYNOS4_SETUP_I2C6 | |
| bool | |
| help | |
| Common setup code for i2c bus 6. | |
| config EXYNOS4_SETUP_I2C7 | |
| bool | |
| help | |
| Common setup code for i2c bus 7. | |
| config EXYNOS4_SETUP_KEYPAD | |
| bool | |
| help | |
| Common setup code for keypad. | |
| config EXYNOS4_SETUP_SDHCI | |
| bool | |
| select EXYNOS4_SETUP_SDHCI_GPIO | |
| help | |
| Internal helper functions for EXYNOS4 based SDHCI systems. | |
| config EXYNOS4_SETUP_SDHCI_GPIO | |
| bool | |
| help | |
| Common setup code for SDHCI gpio. | |
| config EXYNOS4_SETUP_FIMC | |
| bool | |
| help | |
| Common setup code for the camera interfaces. | |
| config EXYNOS4_SETUP_USB_PHY | |
| bool | |
| help | |
| Common setup code for USB PHY controller | |
| config EXYNOS_SETUP_SPI | |
| bool | |
| help | |
| Common setup code for SPI GPIO configurations. | |
| # machine support | |
| if ARCH_EXYNOS4 | |
| comment "EXYNOS4210 Boards" | |
| config MACH_SMDKC210 | |
| bool "SMDKC210" | |
| select MACH_SMDKV310 | |
| help | |
| Machine support for Samsung SMDKC210 | |
| config MACH_SMDKV310 | |
| bool "SMDKV310" | |
| select CPU_EXYNOS4210 | |
| select EXYNOS4_DEV_AHCI | |
| select EXYNOS4_DEV_USB_OHCI | |
| select EXYNOS4_SETUP_FIMD0 | |
| select EXYNOS4_SETUP_I2C1 | |
| select EXYNOS4_SETUP_KEYPAD | |
| select EXYNOS4_SETUP_SDHCI | |
| select EXYNOS4_SETUP_USB_PHY | |
| select EXYNOS_DEV_DMA | |
| select EXYNOS_DEV_SYSMMU | |
| select S3C24XX_PWM | |
| select S3C_DEV_HSMMC | |
| select S3C_DEV_HSMMC1 | |
| select S3C_DEV_HSMMC2 | |
| select S3C_DEV_HSMMC3 | |
| select S3C_DEV_I2C1 | |
| select S3C_DEV_RTC | |
| select S3C_DEV_USB_HSOTG | |
| select S3C_DEV_WDT | |
| select S5P_DEV_FIMC0 | |
| select S5P_DEV_FIMC1 | |
| select S5P_DEV_FIMC2 | |
| select S5P_DEV_FIMC3 | |
| select S5P_DEV_FIMD0 | |
| select S5P_DEV_G2D | |
| select S5P_DEV_I2C_HDMIPHY | |
| select S5P_DEV_JPEG | |
| select S5P_DEV_MFC | |
| select S5P_DEV_TV | |
| select S5P_DEV_USB_EHCI | |
| select SAMSUNG_DEV_BACKLIGHT | |
| select SAMSUNG_DEV_KEYPAD | |
| select SAMSUNG_DEV_PWM | |
| help | |
| Machine support for Samsung SMDKV310 | |
| config MACH_ARMLEX4210 | |
| bool "ARMLEX4210" | |
| select CPU_EXYNOS4210 | |
| select EXYNOS4_DEV_AHCI | |
| select EXYNOS4_SETUP_SDHCI | |
| select EXYNOS_DEV_DMA | |
| select S3C_DEV_HSMMC | |
| select S3C_DEV_HSMMC2 | |
| select S3C_DEV_HSMMC3 | |
| select S3C_DEV_RTC | |
| select S3C_DEV_WDT | |
| help | |
| Machine support for Samsung ARMLEX4210 based on EXYNOS4210 | |
| config MACH_UNIVERSAL_C210 | |
| bool "Mobile UNIVERSAL_C210 Board" | |
| select CLKSRC_MMIO | |
| select CLKSRC_SAMSUNG_PWM | |
| select CPU_EXYNOS4210 | |
| select EXYNOS4_SETUP_FIMC | |
| select EXYNOS4_SETUP_FIMD0 | |
| select EXYNOS4_SETUP_I2C1 | |
| select EXYNOS4_SETUP_I2C3 | |
| select EXYNOS4_SETUP_I2C5 | |
| select EXYNOS4_SETUP_SDHCI | |
| select EXYNOS4_SETUP_USB_PHY | |
| select EXYNOS_DEV_DMA | |
| select EXYNOS_DEV_SYSMMU | |
| select S3C_DEV_HSMMC | |
| select S3C_DEV_HSMMC2 | |
| select S3C_DEV_HSMMC3 | |
| select S3C_DEV_I2C1 | |
| select S3C_DEV_I2C3 | |
| select S3C_DEV_I2C5 | |
| select S3C_DEV_USB_HSOTG | |
| select S5P_DEV_CSIS0 | |
| select S5P_DEV_FIMC0 | |
| select S5P_DEV_FIMC1 | |
| select S5P_DEV_FIMC2 | |
| select S5P_DEV_FIMC3 | |
| select S5P_DEV_FIMD0 | |
| select S5P_DEV_G2D | |
| select S5P_DEV_I2C_HDMIPHY | |
| select S5P_DEV_JPEG | |
| select S5P_DEV_MFC | |
| select S5P_DEV_ONENAND | |
| select S5P_DEV_TV | |
| select S5P_GPIO_INT | |
| select S5P_SETUP_MIPIPHY | |
| help | |
| Machine support for Samsung Mobile Universal S5PC210 Reference | |
| Board. | |
| config MACH_NURI | |
| bool "Mobile NURI Board" | |
| select CPU_EXYNOS4210 | |
| select EXYNOS4_SETUP_FIMC | |
| select EXYNOS4_SETUP_FIMD0 | |
| select EXYNOS4_SETUP_I2C1 | |
| select EXYNOS4_SETUP_I2C3 | |
| select EXYNOS4_SETUP_I2C5 | |
| select EXYNOS4_SETUP_I2C6 | |
| select EXYNOS4_SETUP_SDHCI | |
| select EXYNOS4_SETUP_USB_PHY | |
| select EXYNOS_DEV_DMA | |
| select S3C_DEV_HSMMC | |
| select S3C_DEV_HSMMC2 | |
| select S3C_DEV_HSMMC3 | |
| select S3C_DEV_I2C1 | |
| select S3C_DEV_I2C3 | |
| select S3C_DEV_I2C5 | |
| select S3C_DEV_I2C6 | |
| select S3C_DEV_RTC | |
| select S3C_DEV_USB_HSOTG | |
| select S3C_DEV_WDT | |
| select S5P_DEV_CSIS0 | |
| select S5P_DEV_FIMC0 | |
| select S5P_DEV_FIMC1 | |
| select S5P_DEV_FIMC2 | |
| select S5P_DEV_FIMC3 | |
| select S5P_DEV_FIMD0 | |
| select S5P_DEV_G2D | |
| select S5P_DEV_JPEG | |
| select S5P_DEV_MFC | |
| select S5P_DEV_USB_EHCI | |
| select S5P_GPIO_INT | |
| select S5P_SETUP_MIPIPHY | |
| select SAMSUNG_DEV_ADC | |
| select SAMSUNG_DEV_PWM | |
| help | |
| Machine support for Samsung Mobile NURI Board. | |
| config MACH_ORIGEN | |
| bool "ORIGEN" | |
| select CPU_EXYNOS4210 | |
| select EXYNOS4_DEV_USB_OHCI | |
| select EXYNOS4_SETUP_FIMD0 | |
| select EXYNOS4_SETUP_SDHCI | |
| select EXYNOS4_SETUP_USB_PHY | |
| select EXYNOS_DEV_DMA | |
| select EXYNOS_DEV_SYSMMU | |
| select S3C24XX_PWM | |
| select S3C_DEV_HSMMC | |
| select S3C_DEV_HSMMC2 | |
| select S3C_DEV_RTC | |
| select S3C_DEV_USB_HSOTG | |
| select S3C_DEV_WDT | |
| select S5P_DEV_FIMC0 | |
| select S5P_DEV_FIMC1 | |
| select S5P_DEV_FIMC2 | |
| select S5P_DEV_FIMC3 | |
| select S5P_DEV_FIMD0 | |
| select S5P_DEV_G2D | |
| select S5P_DEV_I2C_HDMIPHY | |
| select S5P_DEV_JPEG | |
| select S5P_DEV_MFC | |
| select S5P_DEV_TV | |
| select S5P_DEV_USB_EHCI | |
| select SAMSUNG_DEV_BACKLIGHT | |
| select SAMSUNG_DEV_PWM | |
| help | |
| Machine support for ORIGEN based on Samsung EXYNOS4210 | |
| comment "EXYNOS4212 Boards" | |
| config MACH_SMDK4212 | |
| bool "SMDK4212" | |
| select EXYNOS4_SETUP_FIMD0 | |
| select EXYNOS4_SETUP_I2C1 | |
| select EXYNOS4_SETUP_I2C3 | |
| select EXYNOS4_SETUP_I2C7 | |
| select EXYNOS4_SETUP_KEYPAD | |
| select EXYNOS4_SETUP_SDHCI | |
| select EXYNOS4_SETUP_USB_PHY | |
| select EXYNOS_DEV_DMA | |
| select EXYNOS_DEV_SYSMMU | |
| select S3C24XX_PWM | |
| select S3C_DEV_HSMMC2 | |
| select S3C_DEV_HSMMC3 | |
| select S3C_DEV_I2C1 | |
| select S3C_DEV_I2C3 | |
| select S3C_DEV_I2C7 | |
| select S3C_DEV_RTC | |
| select S3C_DEV_USB_HSOTG | |
| select S3C_DEV_WDT | |
| select S5P_DEV_FIMC0 | |
| select S5P_DEV_FIMC1 | |
| select S5P_DEV_FIMC2 | |
| select S5P_DEV_FIMC3 | |
| select S5P_DEV_FIMD0 | |
| select S5P_DEV_MFC | |
| select SAMSUNG_DEV_BACKLIGHT | |
| select SAMSUNG_DEV_KEYPAD | |
| select SAMSUNG_DEV_PWM | |
| select SOC_EXYNOS4212 | |
| help | |
| Machine support for Samsung SMDK4212 | |
| comment "EXYNOS4412 Boards" | |
| config MACH_SMDK4412 | |
| bool "SMDK4412" | |
| select MACH_SMDK4212 | |
| select SOC_EXYNOS4412 | |
| help | |
| Machine support for Samsung SMDK4412 | |
| endif | |
| endif | |
| comment "Flattened Device Tree based board for EXYNOS SoCs" | |
| config MACH_EXYNOS4_DT | |
| bool "Samsung Exynos4 Machine using device tree" | |
| depends on ARCH_EXYNOS4 | |
| select ARM_AMBA | |
| select CLKSRC_OF | |
| select CLKSRC_SAMSUNG_PWM if CPU_EXYNOS4210 | |
| select CPU_EXYNOS4210 | |
| select KEYBOARD_SAMSUNG if INPUT_KEYBOARD | |
| select PINCTRL | |
| select PINCTRL_EXYNOS | |
| select S5P_DEV_MFC | |
| select USE_OF | |
| help | |
| Machine support for Samsung Exynos4 machine with device tree enabled. | |
| Select this if a fdt blob is available for the Exynos4 SoC based board. | |
| Note: This is under development and not all peripherals can be supported | |
| with this machine file. | |
| config MACH_EXYNOS5_DT | |
| bool "SAMSUNG EXYNOS5 Machine using device tree" | |
| default y | |
| depends on ARCH_EXYNOS5 | |
| select ARM_AMBA | |
| select CLKSRC_OF | |
| select USE_OF | |
| help | |
| Machine support for Samsung EXYNOS5 machine with device tree enabled. | |
| Select this if a fdt blob is available for the EXYNOS5 SoC based board. | |
| if ARCH_EXYNOS4 | |
| comment "Configuration for HSMMC 8-bit bus width" | |
| config EXYNOS4_SDHCI_CH0_8BIT | |
| bool "Channel 0 with 8-bit bus" | |
| help | |
| Support HSMMC Channel 0 8-bit bus. | |
| If selected, Channel 1 is disabled. | |
| config EXYNOS4_SDHCI_CH2_8BIT | |
| bool "Channel 2 with 8-bit bus" | |
| help | |
| Support HSMMC Channel 2 8-bit bus. | |
| If selected, Channel 3 is disabled. | |
| endif | |
| endmenu | |
| endif |