| # arch/arm/mach-s5p64x0/Kconfig | |
| # | |
| # Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. | |
| # http://www.samsung.com/ | |
| # | |
| # Licensed under GPLv2 | |
| if ARCH_S5P64X0 | |
| config CPU_S5P6440 | |
| bool | |
| select S5P_SLEEP if PM | |
| select SAMSUNG_DMADEV | |
| select SAMSUNG_HRT | |
| select SAMSUNG_WAKEMASK if PM | |
| help | |
| Enable S5P6440 CPU support | |
| config CPU_S5P6450 | |
| bool | |
| select SAMSUNG_HRT | |
| select S5P_SLEEP if PM | |
| select SAMSUNG_DMADEV | |
| select SAMSUNG_WAKEMASK if PM | |
| help | |
| Enable S5P6450 CPU support | |
| config S5P64X0_SETUP_FB_24BPP | |
| bool | |
| help | |
| Common setup code for S5P64X0 based boards with a LCD display | |
| through RGB interface. | |
| config S5P64X0_SETUP_I2C1 | |
| bool | |
| help | |
| Common setup code for i2c bus 1. | |
| config S5P64X0_SETUP_SPI | |
| bool | |
| help | |
| Common setup code for SPI GPIO configurations | |
| config S5P64X0_SETUP_SDHCI_GPIO | |
| bool | |
| help | |
| Common setup code for SDHCI gpio. | |
| # machine support | |
| config MACH_SMDK6440 | |
| bool "SMDK6440" | |
| select CPU_S5P6440 | |
| select S3C_DEV_FB | |
| select S3C_DEV_HSMMC | |
| select S3C_DEV_HSMMC1 | |
| select S3C_DEV_HSMMC2 | |
| select S3C_DEV_I2C1 | |
| select S3C_DEV_RTC | |
| select S3C_DEV_WDT | |
| select S5P64X0_SETUP_FB_24BPP | |
| select S5P64X0_SETUP_I2C1 | |
| select S5P64X0_SETUP_SDHCI_GPIO | |
| select SAMSUNG_DEV_ADC | |
| select SAMSUNG_DEV_BACKLIGHT | |
| select SAMSUNG_DEV_PWM | |
| select SAMSUNG_DEV_TS | |
| help | |
| Machine support for the Samsung SMDK6440 | |
| config MACH_SMDK6450 | |
| bool "SMDK6450" | |
| select CPU_S5P6450 | |
| select S3C_DEV_FB | |
| select S3C_DEV_HSMMC | |
| select S3C_DEV_HSMMC1 | |
| select S3C_DEV_HSMMC2 | |
| select S3C_DEV_I2C1 | |
| select S3C_DEV_RTC | |
| select S3C_DEV_WDT | |
| select S5P64X0_SETUP_FB_24BPP | |
| select S5P64X0_SETUP_I2C1 | |
| select S5P64X0_SETUP_SDHCI_GPIO | |
| select SAMSUNG_DEV_ADC | |
| select SAMSUNG_DEV_BACKLIGHT | |
| select SAMSUNG_DEV_PWM | |
| select SAMSUNG_DEV_TS | |
| help | |
| Machine support for the Samsung SMDK6450 | |
| menu "Use 8-bit SDHCI bus width" | |
| config S5P64X0_SD_CH1_8BIT | |
| bool "SDHCI Channel 1 (Slot 1)" | |
| depends on MACH_SMDK6450 || MACH_SMDK6440 | |
| help | |
| Support SDHCI Channel 1 8-bit bus. | |
| If selected, Channel 2 is disabled. | |
| endmenu | |
| endif |