|  | /****************************************************************************** | 
|  | * | 
|  | *	(C)Copyright 1998,1999 SysKonnect, | 
|  | *	a business unit of Schneider & Koch & Co. Datensysteme GmbH. | 
|  | * | 
|  | *	See the file "skfddi.c" for further information. | 
|  | * | 
|  | *	This program is free software; you can redistribute it and/or modify | 
|  | *	it under the terms of the GNU General Public License as published by | 
|  | *	the Free Software Foundation; either version 2 of the License, or | 
|  | *	(at your option) any later version. | 
|  | * | 
|  | *	The information in this file is provided "AS IS" without warranty. | 
|  | * | 
|  | ******************************************************************************/ | 
|  |  | 
|  | /* | 
|  | * ******************************************************************* | 
|  | * This SBA code implements the Synchronous Bandwidth Allocation | 
|  | * functions described in the "FDDI Synchronous Forum Implementer's | 
|  | * Agreement" dated December 1th, 1993. | 
|  | * ******************************************************************* | 
|  | * | 
|  | *	PURPOSE: The purpose of this function is to control | 
|  | *		 synchronous allocations on a single FDDI segment. | 
|  | *		 Allocations are limited to the primary FDDI ring. | 
|  | *		 The SBM provides recovery mechanisms to recover | 
|  | *		 unused bandwidth also resolves T_Neg and | 
|  | *		 reconfiguration changes. Many of the SBM state | 
|  | *		 machine inputs are sourced by the underlying | 
|  | *		 FDDI sub-system supporting the SBA application. | 
|  | * | 
|  | * ******************************************************************* | 
|  | */ | 
|  |  | 
|  | #include "h/types.h" | 
|  | #include "h/fddi.h" | 
|  | #include "h/smc.h" | 
|  | #include "h/smt_p.h" | 
|  |  | 
|  |  | 
|  | #ifndef	SLIM_SMT | 
|  |  | 
|  | #ifdef ESS | 
|  |  | 
|  | #ifndef lint | 
|  | static const char ID_sccs[] = "@(#)ess.c	1.10 96/02/23 (C) SK" ; | 
|  | #define LINT_USE(x) | 
|  | #else | 
|  | #define LINT_USE(x)	(x)=(x) | 
|  | #endif | 
|  | #define MS2BCLK(x)	((x)*12500L) | 
|  |  | 
|  | /* | 
|  | ------------------------------------------------------------- | 
|  | LOCAL VARIABLES: | 
|  | ------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | static const u_short plist_raf_alc_res[] = { SMT_P0012, SMT_P320B, SMT_P320F, | 
|  | SMT_P3210, SMT_P0019, SMT_P001A, | 
|  | SMT_P001D, 0 } ; | 
|  |  | 
|  | static const u_short plist_raf_chg_req[] = { SMT_P320B, SMT_P320F, SMT_P3210, | 
|  | SMT_P001A, 0 } ; | 
|  |  | 
|  | static const struct fddi_addr smt_sba_da = {{0x80,0x01,0x43,0x00,0x80,0x0C}} ; | 
|  | static const struct fddi_addr null_addr = {{0,0,0,0,0,0}} ; | 
|  |  | 
|  | /* | 
|  | ------------------------------------------------------------- | 
|  | GLOBAL VARIABLES: | 
|  | ------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  |  | 
|  | /* | 
|  | ------------------------------------------------------------- | 
|  | LOCAL FUNCTIONS: | 
|  | ------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | static void ess_send_response(struct s_smc *smc, struct smt_header *sm, | 
|  | int sba_cmd); | 
|  | static void ess_config_fifo(struct s_smc *smc); | 
|  | static void ess_send_alc_req(struct s_smc *smc); | 
|  | static void ess_send_frame(struct s_smc *smc, SMbuf *mb); | 
|  |  | 
|  | /* | 
|  | ------------------------------------------------------------- | 
|  | EXTERNAL FUNCTIONS: | 
|  | ------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | /* | 
|  | ------------------------------------------------------------- | 
|  | PUBLIC FUNCTIONS: | 
|  | ------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | void ess_timer_poll(struct s_smc *smc); | 
|  | void ess_para_change(struct s_smc *smc); | 
|  | int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm, | 
|  | int fs); | 
|  | static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead); | 
|  |  | 
|  |  | 
|  | /* | 
|  | * -------------------------------------------------------------------------- | 
|  | *	End Station Support	(ESS) | 
|  | * -------------------------------------------------------------------------- | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * evaluate the RAF frame | 
|  | */ | 
|  | int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm, | 
|  | int fs) | 
|  | { | 
|  | void			*p ;		/* universal pointer */ | 
|  | struct smt_p_0016	*cmd ;		/* para: command for the ESS */ | 
|  | SMbuf			*db ; | 
|  | u_long			msg_res_type ;	/* recource type */ | 
|  | u_long			payload, overhead ; | 
|  | int			local ; | 
|  | int			i ; | 
|  |  | 
|  | /* | 
|  | * Message Processing Code | 
|  | */ | 
|  | local = ((fs & L_INDICATOR) != 0) ; | 
|  |  | 
|  | /* | 
|  | * get the resource type | 
|  | */ | 
|  | if (!(p = (void *) sm_to_para(smc,sm,SMT_P0015))) { | 
|  | DB_ESS("ESS: RAF frame error, parameter type not found\n",0,0) ; | 
|  | return fs; | 
|  | } | 
|  | msg_res_type = ((struct smt_p_0015 *)p)->res_type ; | 
|  |  | 
|  | /* | 
|  | * get the pointer to the ESS command | 
|  | */ | 
|  | if (!(cmd = (struct smt_p_0016 *) sm_to_para(smc,sm,SMT_P0016))) { | 
|  | /* | 
|  | * error in frame: para ESS command was not found | 
|  | */ | 
|  | DB_ESS("ESS: RAF frame error, parameter command not found\n",0,0); | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | DB_ESSN(2,"fc %x	ft %x\n",sm->smt_class,sm->smt_type) ; | 
|  | DB_ESSN(2,"ver %x	tran %lx\n",sm->smt_version,sm->smt_tid) ; | 
|  | DB_ESSN(2,"stn_id %s\n",addr_to_string(&sm->smt_source),0) ; | 
|  |  | 
|  | DB_ESSN(2,"infolen %x	res %x\n",sm->smt_len, msg_res_type) ; | 
|  | DB_ESSN(2,"sbacmd %x\n",cmd->sba_cmd,0) ; | 
|  |  | 
|  | /* | 
|  | * evaluate the ESS command | 
|  | */ | 
|  | switch (cmd->sba_cmd) { | 
|  |  | 
|  | /* | 
|  | * Process an ESS Allocation Request | 
|  | */ | 
|  | case REQUEST_ALLOCATION : | 
|  | /* | 
|  | * check for an RAF Request (Allocation Request) | 
|  | */ | 
|  | if (sm->smt_type == SMT_REQUEST) { | 
|  | /* | 
|  | * process the Allocation request only if the frame is | 
|  | * local and no static allocation is used | 
|  | */ | 
|  | if (!local || smc->mib.fddiESSPayload) | 
|  | return fs; | 
|  |  | 
|  | p = (void *) sm_to_para(smc,sm,SMT_P0019)  ; | 
|  | for (i = 0; i < 5; i++) { | 
|  | if (((struct smt_p_0019 *)p)->alloc_addr.a[i]) { | 
|  | return fs; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Note: The Application should send a LAN_LOC_FRAME. | 
|  | *	 The ESS do not send the Frame to the network! | 
|  | */ | 
|  | smc->ess.alloc_trans_id = sm->smt_tid ; | 
|  | DB_ESS("ESS: save Alloc Req Trans ID %lx\n",sm->smt_tid,0); | 
|  | p = (void *) sm_to_para(smc,sm,SMT_P320F) ; | 
|  | ((struct smt_p_320f *)p)->mib_payload = | 
|  | smc->mib.a[PATH0].fddiPATHSbaPayload ; | 
|  | p = (void *) sm_to_para(smc,sm,SMT_P3210) ; | 
|  | ((struct smt_p_3210 *)p)->mib_overhead = | 
|  | smc->mib.a[PATH0].fddiPATHSbaOverhead ; | 
|  | sm->smt_dest = smt_sba_da ; | 
|  |  | 
|  | if (smc->ess.local_sba_active) | 
|  | return fs | I_INDICATOR; | 
|  |  | 
|  | if (!(db = smt_get_mbuf(smc))) | 
|  | return fs; | 
|  |  | 
|  | db->sm_len = mb->sm_len ; | 
|  | db->sm_off = mb->sm_off ; | 
|  | memcpy(((char *)(db->sm_data+db->sm_off)),(char *)sm, | 
|  | (int)db->sm_len) ; | 
|  | dump_smt(smc, | 
|  | (struct smt_header *)(db->sm_data+db->sm_off), | 
|  | "RAF") ; | 
|  | smt_send_frame(smc,db,FC_SMT_INFO,0) ; | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * The RAF frame is an Allocation Response ! | 
|  | * check the parameters | 
|  | */ | 
|  | if (smt_check_para(smc,sm,plist_raf_alc_res)) { | 
|  | DB_ESS("ESS: RAF with para problem, ignoring\n",0,0) ; | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * VERIFY THE FRAME IS WELL BUILT: | 
|  | * | 
|  | *	1. path index = primary ring only | 
|  | *	2. resource type = sync bw only | 
|  | *	3. trans action id = alloc_trans_id | 
|  | *	4. reason code = success | 
|  | * | 
|  | * If any are violated, discard the RAF frame | 
|  | */ | 
|  | if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index | 
|  | != PRIMARY_RING) || | 
|  | (msg_res_type != SYNC_BW) || | 
|  | (((struct smt_p_reason *)sm_to_para(smc,sm,SMT_P0012))->rdf_reason | 
|  | != SMT_RDF_SUCCESS) || | 
|  | (sm->smt_tid != smc->ess.alloc_trans_id)) { | 
|  |  | 
|  | DB_ESS("ESS: Allocation Response not accepted\n",0,0) ; | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Extract message parameters | 
|  | */ | 
|  | p = (void *) sm_to_para(smc,sm,SMT_P320F) ; | 
|  | if (!p) { | 
|  | printk(KERN_ERR "ESS: sm_to_para failed"); | 
|  | return fs; | 
|  | } | 
|  | payload = ((struct smt_p_320f *)p)->mib_payload ; | 
|  | p = (void *) sm_to_para(smc,sm,SMT_P3210) ; | 
|  | if (!p) { | 
|  | printk(KERN_ERR "ESS: sm_to_para failed"); | 
|  | return fs; | 
|  | } | 
|  | overhead = ((struct smt_p_3210 *)p)->mib_overhead ; | 
|  |  | 
|  | DB_ESSN(2,"payload= %lx	overhead= %lx\n",payload,overhead) ; | 
|  |  | 
|  | /* | 
|  | * process the bandwidth allocation | 
|  | */ | 
|  | (void)process_bw_alloc(smc,(long)payload,(long)overhead) ; | 
|  |  | 
|  | return fs; | 
|  | /* end of Process Allocation Request */ | 
|  |  | 
|  | /* | 
|  | * Process an ESS Change Request | 
|  | */ | 
|  | case CHANGE_ALLOCATION : | 
|  | /* | 
|  | * except only replies | 
|  | */ | 
|  | if (sm->smt_type != SMT_REQUEST) { | 
|  | DB_ESS("ESS: Do not process Change Responses\n",0,0) ; | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * check the para for the Change Request | 
|  | */ | 
|  | if (smt_check_para(smc,sm,plist_raf_chg_req)) { | 
|  | DB_ESS("ESS: RAF with para problem, ignoring\n",0,0) ; | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Verify the path index and resource | 
|  | * type are correct. If any of | 
|  | * these are false, don't process this | 
|  | * change request frame. | 
|  | */ | 
|  | if ((((struct smt_p_320b *)sm_to_para(smc,sm,SMT_P320B))->path_index | 
|  | != PRIMARY_RING) || (msg_res_type != SYNC_BW)) { | 
|  | DB_ESS("ESS: RAF frame with para problem, ignoring\n",0,0) ; | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Extract message queue parameters | 
|  | */ | 
|  | p = (void *) sm_to_para(smc,sm,SMT_P320F) ; | 
|  | payload = ((struct smt_p_320f *)p)->mib_payload ; | 
|  | p = (void *) sm_to_para(smc,sm,SMT_P3210) ; | 
|  | overhead = ((struct smt_p_3210 *)p)->mib_overhead ; | 
|  |  | 
|  | DB_ESSN(2,"ESS: Change Request from %s\n", | 
|  | addr_to_string(&sm->smt_source),0) ; | 
|  | DB_ESSN(2,"payload= %lx	overhead= %lx\n",payload,overhead) ; | 
|  |  | 
|  | /* | 
|  | * process the bandwidth allocation | 
|  | */ | 
|  | if(!process_bw_alloc(smc,(long)payload,(long)overhead)) | 
|  | return fs; | 
|  |  | 
|  | /* | 
|  | * send an RAF Change Reply | 
|  | */ | 
|  | ess_send_response(smc,sm,CHANGE_ALLOCATION) ; | 
|  |  | 
|  | return fs; | 
|  | /* end of Process Change Request */ | 
|  |  | 
|  | /* | 
|  | * Process Report Response | 
|  | */ | 
|  | case REPORT_ALLOCATION : | 
|  | /* | 
|  | * except only requests | 
|  | */ | 
|  | if (sm->smt_type != SMT_REQUEST) { | 
|  | DB_ESS("ESS: Do not process a Report Reply\n",0,0) ; | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | DB_ESSN(2,"ESS: Report Request from %s\n", | 
|  | addr_to_string(&(sm->smt_source)),0) ; | 
|  |  | 
|  | /* | 
|  | * verify that the resource type is sync bw only | 
|  | */ | 
|  | if (msg_res_type != SYNC_BW) { | 
|  | DB_ESS("ESS: ignoring RAF with para problem\n",0,0) ; | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * send an RAF Change Reply | 
|  | */ | 
|  | ess_send_response(smc,sm,REPORT_ALLOCATION) ; | 
|  |  | 
|  | return fs; | 
|  | /* end of Process Report Request */ | 
|  |  | 
|  | default: | 
|  | /* | 
|  | * error in frame | 
|  | */ | 
|  | DB_ESS("ESS: ignoring RAF with bad sba_cmd\n",0,0) ; | 
|  | break ; | 
|  | } | 
|  |  | 
|  | return fs; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * determines the synchronous bandwidth, set the TSYNC register and the | 
|  | * mib variables SBAPayload, SBAOverhead and fddiMACT-NEG. | 
|  | */ | 
|  | static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhead) | 
|  | { | 
|  | /* | 
|  | * determine the synchronous bandwidth (sync_bw) in bytes per T-NEG, | 
|  | * if the payload is greater than zero. | 
|  | * For the SBAPayload and the SBAOverhead we have the following | 
|  | * unite quations | 
|  | *		      _		  _ | 
|  | *		     |	     bytes | | 
|  | *	SBAPayload = | 8000 ------ | | 
|  | *		     |		s  | | 
|  | *		      -		  - | 
|  | *		       _       _ | 
|  | *		      |	 bytes	| | 
|  | *	SBAOverhead = | ------	| | 
|  | *		      |	 T-NEG	| | 
|  | *		       -       - | 
|  | * | 
|  | * T-NEG is described by the equation: | 
|  | * | 
|  | *		     (-) fddiMACT-NEG | 
|  | *	T-NEG =	    ------------------- | 
|  | *			12500000 1/s | 
|  | * | 
|  | * The number of bytes we are able to send is the payload | 
|  | * plus the overhead. | 
|  | * | 
|  | *			  bytes    T-NEG SBAPayload 8000 bytes/s | 
|  | * sync_bw =  SBAOverhead ------ + ----------------------------- | 
|  | *	   		  T-NEG		T-NEG | 
|  | * | 
|  | * | 
|  | *	      		     1 | 
|  | * sync_bw =  SBAOverhead + ---- (-)fddiMACT-NEG * SBAPayload | 
|  | *	       		    1562 | 
|  | * | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * set the mib attributes fddiPATHSbaOverhead, fddiPATHSbaPayload | 
|  | */ | 
|  | /*	if (smt_set_obj(smc,SMT_P320F,payload,S_SET)) { | 
|  | DB_ESS("ESS: SMT does not accept the payload value\n",0,0) ; | 
|  | return FALSE; | 
|  | } | 
|  | if (smt_set_obj(smc,SMT_P3210,overhead,S_SET)) { | 
|  | DB_ESS("ESS: SMT does not accept the overhead value\n",0,0) ; | 
|  | return FALSE; | 
|  | } */ | 
|  |  | 
|  | /* premliminary */ | 
|  | if (payload > MAX_PAYLOAD || overhead > 5000) { | 
|  | DB_ESS("ESS: payload / overhead not accepted\n",0,0) ; | 
|  | return FALSE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * start the iterative allocation process if the payload or the overhead | 
|  | * are smaller than the parsed values | 
|  | */ | 
|  | if (smc->mib.fddiESSPayload && | 
|  | ((u_long)payload != smc->mib.fddiESSPayload || | 
|  | (u_long)overhead != smc->mib.fddiESSOverhead)) { | 
|  | smc->ess.raf_act_timer_poll = TRUE ; | 
|  | smc->ess.timer_count = 0 ; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * evulate the Payload | 
|  | */ | 
|  | if (payload) { | 
|  | DB_ESSN(2,"ESS: turn SMT_ST_SYNC_SERVICE bit on\n",0,0) ; | 
|  | smc->ess.sync_bw_available = TRUE ; | 
|  |  | 
|  | smc->ess.sync_bw = overhead - | 
|  | (long)smc->mib.m[MAC0].fddiMACT_Neg * | 
|  | payload / 1562 ; | 
|  | } | 
|  | else { | 
|  | DB_ESSN(2,"ESS: turn SMT_ST_SYNC_SERVICE bit off\n",0,0) ; | 
|  | smc->ess.sync_bw_available = FALSE ; | 
|  | smc->ess.sync_bw = 0 ; | 
|  | overhead = 0 ; | 
|  | } | 
|  |  | 
|  | smc->mib.a[PATH0].fddiPATHSbaPayload = payload ; | 
|  | smc->mib.a[PATH0].fddiPATHSbaOverhead = overhead ; | 
|  |  | 
|  |  | 
|  | DB_ESSN(2,"tsync = %lx\n",smc->ess.sync_bw,0) ; | 
|  |  | 
|  | ess_config_fifo(smc) ; | 
|  | set_formac_tsync(smc,smc->ess.sync_bw) ; | 
|  | return TRUE; | 
|  | } | 
|  |  | 
|  | static void ess_send_response(struct s_smc *smc, struct smt_header *sm, | 
|  | int sba_cmd) | 
|  | { | 
|  | struct smt_sba_chg	*chg ; | 
|  | SMbuf			*mb ; | 
|  | void			*p ; | 
|  |  | 
|  | /* | 
|  | * get and initialize the response frame | 
|  | */ | 
|  | if (sba_cmd == CHANGE_ALLOCATION) { | 
|  | if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY, | 
|  | sizeof(struct smt_sba_chg)))) | 
|  | return ; | 
|  | } | 
|  | else { | 
|  | if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY, | 
|  | sizeof(struct smt_sba_rep_res)))) | 
|  | return ; | 
|  | } | 
|  |  | 
|  | chg = smtod(mb,struct smt_sba_chg *) ; | 
|  | chg->smt.smt_tid = sm->smt_tid ; | 
|  | chg->smt.smt_dest = sm->smt_source ; | 
|  |  | 
|  | /* set P15 */ | 
|  | chg->s_type.para.p_type = SMT_P0015 ; | 
|  | chg->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ; | 
|  | chg->s_type.res_type = SYNC_BW ; | 
|  |  | 
|  | /* set P16 */ | 
|  | chg->cmd.para.p_type = SMT_P0016 ; | 
|  | chg->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ; | 
|  | chg->cmd.sba_cmd = sba_cmd ; | 
|  |  | 
|  | /* set P320B */ | 
|  | chg->path.para.p_type = SMT_P320B ; | 
|  | chg->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ; | 
|  | chg->path.mib_index = SBAPATHINDEX ; | 
|  | chg->path.path_pad = 0; | 
|  | chg->path.path_index = PRIMARY_RING ; | 
|  |  | 
|  | /* set P320F */ | 
|  | chg->payload.para.p_type = SMT_P320F ; | 
|  | chg->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ; | 
|  | chg->payload.mib_index = SBAPATHINDEX ; | 
|  | chg->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ; | 
|  |  | 
|  | /* set P3210 */ | 
|  | chg->overhead.para.p_type = SMT_P3210 ; | 
|  | chg->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ; | 
|  | chg->overhead.mib_index = SBAPATHINDEX ; | 
|  | chg->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ; | 
|  |  | 
|  | if (sba_cmd == CHANGE_ALLOCATION) { | 
|  | /* set P1A */ | 
|  | chg->cat.para.p_type = SMT_P001A ; | 
|  | chg->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ; | 
|  | p = (void *) sm_to_para(smc,sm,SMT_P001A) ; | 
|  | chg->cat.category = ((struct smt_p_001a *)p)->category ; | 
|  | } | 
|  | dump_smt(smc,(struct smt_header *)chg,"RAF") ; | 
|  | ess_send_frame(smc,mb) ; | 
|  | } | 
|  |  | 
|  | void ess_timer_poll(struct s_smc *smc) | 
|  | { | 
|  | if (!smc->ess.raf_act_timer_poll) | 
|  | return ; | 
|  |  | 
|  | DB_ESSN(2,"ESS: timer_poll\n",0,0) ; | 
|  |  | 
|  | smc->ess.timer_count++ ; | 
|  | if (smc->ess.timer_count == 10) { | 
|  | smc->ess.timer_count = 0 ; | 
|  | ess_send_alc_req(smc) ; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ess_send_alc_req(struct s_smc *smc) | 
|  | { | 
|  | struct smt_sba_alc_req *req ; | 
|  | SMbuf	*mb ; | 
|  |  | 
|  | /* | 
|  | * send never allocation request where the requested payload and | 
|  | * overhead is zero or deallocate bandwidth when no bandwidth is | 
|  | * parsed | 
|  | */ | 
|  | if (!smc->mib.fddiESSPayload) { | 
|  | smc->mib.fddiESSOverhead = 0 ; | 
|  | } | 
|  | else { | 
|  | if (!smc->mib.fddiESSOverhead) | 
|  | smc->mib.fddiESSOverhead = DEFAULT_OV ; | 
|  | } | 
|  |  | 
|  | if (smc->mib.fddiESSOverhead == | 
|  | smc->mib.a[PATH0].fddiPATHSbaOverhead && | 
|  | smc->mib.fddiESSPayload == | 
|  | smc->mib.a[PATH0].fddiPATHSbaPayload){ | 
|  | smc->ess.raf_act_timer_poll = FALSE ; | 
|  | smc->ess.timer_count = 7 ;	/* next RAF alc req after 3 s */ | 
|  | return ; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * get and initialize the response frame | 
|  | */ | 
|  | if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REQUEST, | 
|  | sizeof(struct smt_sba_alc_req)))) | 
|  | return ; | 
|  | req = smtod(mb,struct smt_sba_alc_req *) ; | 
|  | req->smt.smt_tid = smc->ess.alloc_trans_id = smt_get_tid(smc) ; | 
|  | req->smt.smt_dest = smt_sba_da ; | 
|  |  | 
|  | /* set P15 */ | 
|  | req->s_type.para.p_type = SMT_P0015 ; | 
|  | req->s_type.para.p_len = sizeof(struct smt_p_0015) - PARA_LEN ; | 
|  | req->s_type.res_type = SYNC_BW ; | 
|  |  | 
|  | /* set P16 */ | 
|  | req->cmd.para.p_type = SMT_P0016 ; | 
|  | req->cmd.para.p_len = sizeof(struct smt_p_0016) - PARA_LEN ; | 
|  | req->cmd.sba_cmd = REQUEST_ALLOCATION ; | 
|  |  | 
|  | /* | 
|  | * set the parameter type and parameter length of all used | 
|  | * parameters | 
|  | */ | 
|  |  | 
|  | /* set P320B */ | 
|  | req->path.para.p_type = SMT_P320B ; | 
|  | req->path.para.p_len = sizeof(struct smt_p_320b) - PARA_LEN ; | 
|  | req->path.mib_index = SBAPATHINDEX ; | 
|  | req->path.path_pad = 0; | 
|  | req->path.path_index = PRIMARY_RING ; | 
|  |  | 
|  | /* set P0017 */ | 
|  | req->pl_req.para.p_type = SMT_P0017 ; | 
|  | req->pl_req.para.p_len = sizeof(struct smt_p_0017) - PARA_LEN ; | 
|  | req->pl_req.sba_pl_req = smc->mib.fddiESSPayload - | 
|  | smc->mib.a[PATH0].fddiPATHSbaPayload ; | 
|  |  | 
|  | /* set P0018 */ | 
|  | req->ov_req.para.p_type = SMT_P0018 ; | 
|  | req->ov_req.para.p_len = sizeof(struct smt_p_0018) - PARA_LEN ; | 
|  | req->ov_req.sba_ov_req = smc->mib.fddiESSOverhead - | 
|  | smc->mib.a[PATH0].fddiPATHSbaOverhead ; | 
|  |  | 
|  | /* set P320F */ | 
|  | req->payload.para.p_type = SMT_P320F ; | 
|  | req->payload.para.p_len = sizeof(struct smt_p_320f) - PARA_LEN ; | 
|  | req->payload.mib_index = SBAPATHINDEX ; | 
|  | req->payload.mib_payload = smc->mib.a[PATH0].fddiPATHSbaPayload ; | 
|  |  | 
|  | /* set P3210 */ | 
|  | req->overhead.para.p_type = SMT_P3210 ; | 
|  | req->overhead.para.p_len = sizeof(struct smt_p_3210) - PARA_LEN ; | 
|  | req->overhead.mib_index = SBAPATHINDEX ; | 
|  | req->overhead.mib_overhead = smc->mib.a[PATH0].fddiPATHSbaOverhead ; | 
|  |  | 
|  | /* set P19 */ | 
|  | req->a_addr.para.p_type = SMT_P0019 ; | 
|  | req->a_addr.para.p_len = sizeof(struct smt_p_0019) - PARA_LEN ; | 
|  | req->a_addr.sba_pad = 0; | 
|  | req->a_addr.alloc_addr = null_addr ; | 
|  |  | 
|  | /* set P1A */ | 
|  | req->cat.para.p_type = SMT_P001A ; | 
|  | req->cat.para.p_len = sizeof(struct smt_p_001a) - PARA_LEN ; | 
|  | req->cat.category = smc->mib.fddiESSCategory ; | 
|  |  | 
|  | /* set P1B */ | 
|  | req->tneg.para.p_type = SMT_P001B ; | 
|  | req->tneg.para.p_len = sizeof(struct smt_p_001b) - PARA_LEN ; | 
|  | req->tneg.max_t_neg = smc->mib.fddiESSMaxTNeg ; | 
|  |  | 
|  | /* set P1C */ | 
|  | req->segm.para.p_type = SMT_P001C ; | 
|  | req->segm.para.p_len = sizeof(struct smt_p_001c) - PARA_LEN ; | 
|  | req->segm.min_seg_siz = smc->mib.fddiESSMinSegmentSize ; | 
|  |  | 
|  | dump_smt(smc,(struct smt_header *)req,"RAF") ; | 
|  | ess_send_frame(smc,mb) ; | 
|  | } | 
|  |  | 
|  | static void ess_send_frame(struct s_smc *smc, SMbuf *mb) | 
|  | { | 
|  | /* | 
|  | * check if the frame must be send to the own ESS | 
|  | */ | 
|  | if (smc->ess.local_sba_active) { | 
|  | /* | 
|  | * Send the Change Reply to the local SBA | 
|  | */ | 
|  | DB_ESS("ESS:Send to the local SBA\n",0,0) ; | 
|  | if (!smc->ess.sba_reply_pend) | 
|  | smc->ess.sba_reply_pend = mb ; | 
|  | else { | 
|  | DB_ESS("Frame is lost - another frame was pending\n",0,0); | 
|  | smt_free_mbuf(smc,mb) ; | 
|  | } | 
|  | } | 
|  | else { | 
|  | /* | 
|  | * Send the SBA RAF Change Reply to the network | 
|  | */ | 
|  | DB_ESS("ESS:Send to the network\n",0,0) ; | 
|  | smt_send_frame(smc,mb,FC_SMT_INFO,0) ; | 
|  | } | 
|  | } | 
|  |  | 
|  | void ess_para_change(struct s_smc *smc) | 
|  | { | 
|  | (void)process_bw_alloc(smc,(long)smc->mib.a[PATH0].fddiPATHSbaPayload, | 
|  | (long)smc->mib.a[PATH0].fddiPATHSbaOverhead) ; | 
|  | } | 
|  |  | 
|  | static void ess_config_fifo(struct s_smc *smc) | 
|  | { | 
|  | /* | 
|  | * if nothing to do exit | 
|  | */ | 
|  | if (smc->mib.a[PATH0].fddiPATHSbaPayload) { | 
|  | if (smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON && | 
|  | (smc->hw.fp.fifo.fifo_config_mode&SEND_ASYNC_AS_SYNC) == | 
|  | smc->mib.fddiESSSynchTxMode) { | 
|  | return ; | 
|  | } | 
|  | } | 
|  | else { | 
|  | if (!(smc->hw.fp.fifo.fifo_config_mode & SYNC_TRAFFIC_ON)) { | 
|  | return ; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * split up the FIFO and reinitialize the queues | 
|  | */ | 
|  | formac_reinit_tx(smc) ; | 
|  | } | 
|  |  | 
|  | #endif /* ESS */ | 
|  |  | 
|  | #endif	/* no SLIM_SMT */ | 
|  |  |