blob: a088db6d50911799780838c0388cf9435d2c3a31 [file] [log] [blame]
config SND_OMAP_SOC
tristate "SoC Audio for the Texas Instruments OMAP chips"
depends on ARCH_OMAP
config SND_OMAP_SOC_MCBSP
tristate
select OMAP_MCBSP
config SND_OMAP_SOC_MCPDM
tristate
config SND_OMAP_SOC_N810
tristate "SoC Audio support for Nokia N810"
depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
depends on OMAP_MUX
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on Nokia N810.
config SND_OMAP_SOC_RX51
tristate "SoC Audio support for Nokia RX-51"
depends on SND_OMAP_SOC && MACH_NOKIA_RX51
select OMAP_MCBSP
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on Nokia RX-51
hardware. This is also known as Nokia N900 product.
config SND_OMAP_SOC_AMS_DELTA
tristate "SoC Audio support for Amstrad E3 (Delta) videophone"
depends on SND_OMAP_SOC && MACH_AMS_DELTA
select SND_OMAP_SOC_MCBSP
select SND_SOC_CX20442
help
Say Y if you want to add support for SoC audio device connected to
a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
Note that in order to get those devices fully supported, you have to
build the kernel with standard serial port driver included and
configured for at least 4 ports. Then, from userspace, you must load
a line discipline #19 on the modem (ttyS3) serial line. The simplest
way to achieve this is to install util-linux-ng and use the included
ldattach utility. This can be started automatically from udev,
a simple rule like this one should do the trick (it does for me):
ACTION=="add", KERNEL=="controlC0", \
RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
config SND_OMAP_SOC_OSK5912
tristate "SoC Audio support for omap osk5912"
depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC23
help
Say Y if you want to add support for SoC audio on osk5912.
config SND_OMAP_SOC_OVERO
tristate "SoC Audio support for Gumstix Overo and CompuLab CM-T35"
depends on TWL4030_CORE && SND_OMAP_SOC && (MACH_OVERO || MACH_CM_T35)
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for SoC audio on the
Gumstix Overo or CompuLab CM-T35
config SND_OMAP_SOC_OMAP2EVM
tristate "SoC Audio support for OMAP2EVM board"
depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP2EVM
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for SoC audio on the omap2evm board.
config SND_OMAP_SOC_OMAP3EVM
tristate "SoC Audio support for OMAP3EVM board"
depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for SoC audio on the omap3evm board.
config SND_OMAP_SOC_AM3517EVM
tristate "SoC Audio support for OMAP3517 / AM3517 EVM"
depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C
select SND_OMAP_SOC_MCBSP
select SND_SOC_TLV320AIC23
help
Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517
EVM.
config SND_OMAP_SOC_SDP3430
tristate "SoC Audio support for Texas Instruments SDP3430"
depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for SoC audio on Texas Instruments
SDP3430.
config SND_OMAP_SOC_SDP4430
tristate "SoC Audio support for Texas Instruments SDP4430"
depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_4430SDP
select SND_OMAP_SOC_MCPDM
select SND_SOC_TWL6040
help
Say Y if you want to add support for SoC audio on Texas Instruments
SDP4430.
config SND_OMAP_SOC_OMAP3_PANDORA
tristate "SoC Audio support for OMAP3 Pandora"
depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for SoC audio on the OMAP3 Pandora.
config SND_OMAP_SOC_OMAP3_BEAGLE
tristate "SoC Audio support for OMAP3 Beagle and Devkit8000"
depends on TWL4030_CORE && SND_OMAP_SOC
depends on (MACH_OMAP3_BEAGLE || MACH_DEVKIT8000)
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for SoC audio on the Beagleboard or
the clone Devkit8000.
config SND_OMAP_SOC_ZOOM2
tristate "SoC Audio support for Zoom2"
depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_ZOOM2
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for Soc audio on Zoom2 board.
config SND_OMAP_SOC_IGEP0020
tristate "SoC Audio support for IGEP v2"
depends on TWL4030_CORE && SND_OMAP_SOC && MACH_IGEP0020
select SND_OMAP_SOC_MCBSP
select SND_SOC_TWL4030
help
Say Y if you want to add support for Soc audio on IGEP v2 board.