| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/actual_profile |
| Date: October 2010 |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> |
| Description: The integer value of this attribute ranges from 0-4. |
| When read, this attribute returns the number of the actual |
| profile. This value is persistent, so its equivalent to the |
| profile that's active when the mouse is powered on next time. |
| When written, this file sets the number of the startup profile |
| and the mouse activates this profile immediately. |
| Users: http://roccat.sourceforge.net |
| |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info |
| Date: November 2012 |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> |
| Description: When read, this file returns general data like firmware version. |
| When written, the device can be reset. |
| The data is 8 bytes long. |
| Users: http://roccat.sourceforge.net |
| |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro |
| Date: October 2010 |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> |
| Description: The mouse can store a macro with max 500 key/button strokes |
| internally. |
| When written, this file lets one set the sequence for a specific |
| button for a specific profile. Button and profile numbers are |
| included in written data. The data has to be 2082 bytes long. |
| This file is writeonly. |
| Users: http://roccat.sourceforge.net |
| |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_buttons |
| Date: August 2010 |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> |
| Description: The mouse can store 5 profiles which can be switched by the |
| press of a button. A profile is split in settings and buttons. |
| profile_buttons holds information about button layout. |
| When written, this file lets one write the respective profile |
| buttons back to the mouse. The data has to be 77 bytes long. |
| The mouse will reject invalid data. |
| Which profile to write is determined by the profile number |
| contained in the data. |
| Before reading this file, control has to be written to select |
| which profile to read. |
| Users: http://roccat.sourceforge.net |
| |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings |
| Date: October 2010 |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> |
| Description: The mouse can store 5 profiles which can be switched by the |
| press of a button. A profile is split in settings and buttons. |
| profile_settings holds information like resolution, sensitivity |
| and light effects. |
| When written, this file lets one write the respective profile |
| settings back to the mouse. The data has to be 43 bytes long. |
| The mouse will reject invalid data. |
| Which profile to write is determined by the profile number |
| contained in the data. |
| Before reading this file, control has to be written to select |
| which profile to read. |
| Users: http://roccat.sourceforge.net |
| |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor |
| Date: October 2010 |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> |
| Description: The mouse has a tracking- and a distance-control-unit. These |
| can be activated/deactivated and the lift-off distance can be |
| set. The data has to be 6 bytes long. |
| This file is writeonly. |
| Users: http://roccat.sourceforge.net |
| |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk |
| Date: May 2011 |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> |
| Description: Used to active some easy* functions of the mouse from outside. |
| The data has to be 16 bytes long. |
| This file is writeonly. |
| Users: http://roccat.sourceforge.net |
| |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu |
| Date: October 2010 |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> |
| Description: When written a calibration process for the tracking control unit |
| can be initiated/cancelled. Also lets one read/write sensor |
| registers. |
| The data has to be 4 bytes long. |
| Users: http://roccat.sourceforge.net |
| |
| What: /sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image |
| Date: October 2010 |
| Contact: Stefan Achatz <erazor_de@users.sourceforge.net> |
| Description: When read the mouse returns a 30x30 pixel image of the |
| sampled underground. This works only in the course of a |
| calibration process initiated with tcu. |
| The returned data is 1028 bytes in size. |
| This file is readonly. |
| Users: http://roccat.sourceforge.net |
