|  | 
 | U-Boot MARUBUN MR-SHPC-01 PCMCIA controller driver | 
 | 	Last update 21/11/2007 by Nobuhiro Iwamatsu | 
 |  | 
 | ======================================================================================== | 
 |  | 
 | 0. What's this? | 
 |     This driver supports MARUBUN MR-SHPC-01. | 
 | 	url: http://www.marubun.co.jp/product/semicon/devices/qgc18e0000002n2z.html | 
 | 	(Sorry Japanese only.) | 
 |  | 
 |     This chip is used with SuperH well, and adopted by the | 
 |     reference board. | 
 | 	ex. * MS7750SE01 | 
 | 		* MS7722SE01 | 
 | 		* other | 
 |  | 
 |     This chip doesn't support CardBus. | 
 |  | 
 | 1. base source code | 
 |     The code is based on sources from the Linux kernel | 
 | 	( arch/sh/kernel/cf-enabler.c ). | 
 |  | 
 | 2. How to use | 
 |     The options you have to specify in the config file are (with the | 
 |     value for my board as an example): | 
 |  | 
 |     * CONFIG_MARUBUN_PCCARD | 
 | 	If you want to use this device driver, should define CONFIG_MARUBUN_PCCARD. | 
 | 	ex.	#define CONFIG_MARUBUN_PCCARD | 
 |  | 
 |     * CONFIG_PCMCIA_SLOT_A | 
 | 	Most devices have only one slot. You should define CONFIG_PCMCIA_SLOT_A . | 
 | 	ex.	#define CONFIG_PCMCIA_SLOT_A    1 | 
 |  | 
 |     * CONFIG_SYS_MARUBUN_MRSHPC | 
 | 	This is MR-SHPC-01 PCMCIA controler base address. | 
 | 	You should do the setting matched to your environment. | 
 | 	ex.  #define CONFIG_SYS_MARUBUN_MRSHPC 0xb03fffe0 | 
 | 	     ( for MS7722SE01 environment ) | 
 |  | 
 |     * CONFIG_SYS_MARUBUN_MW1 | 
 | 	This is MR-SHPC-01 memory window base address. | 
 | 	You should do the setting matched to your environment. | 
 | 	ex. #define CONFIG_SYS_MARUBUN_MW1 0xb0400000 | 
 | 	     ( for MS7722SE01 environment ) | 
 |  | 
 |     * CONFIG_SYS_MARUBUN_MW1 | 
 | 	This is MR-SHPC-01 attribute window base address. | 
 | 	You should do the setting matched to your environment. | 
 | 	ex. #define CONFIG_SYS_MARUBUN_MW2 0xb0500000 | 
 | 	     ( for MS7722SE01 environment ) | 
 |  | 
 |     * CONFIG_SYS_MARUBUN_MW1 | 
 | 	This is MR-SHPC-01 I/O window base address. | 
 | 	You should do the setting matched to your environment. | 
 | 	ex. #define CONFIG_SYS_MARUBUN_IO  0xb0600000 | 
 | 	     ( for MS7722SE01 environment ) | 
 |  | 
 | 3. Other | 
 |     * Check Compact Flash only. | 
 |     * Maybe, NE2000 compatible NIC is sure to move. | 
 |  | 
 | Copyright (c) 2007 | 
 | 	Nobuhiro Iwamatsu <iwamatsu@nigaur.org> |