| Create partitions |
| Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel |
| |
| Changes will remain in memory only, until you decide to write them. |
| After that, of course, the previous content won't be recoverable. |
| |
| Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) |
| |
| The device presents a logical sector size that is smaller than |
| the physical sector size. Aligning to a physical sector (or optimal |
| I/O) size boundary is recommended, or performance may be impacted. |
| |
| WARNING: DOS-compatible mode is deprecated. It's strongly recommended to |
| switch off the mode (command 'c') and change display units to |
| sectors (command 'u'). |
| |
| Command (m for help): DOS Compatibility flag is not set |
| |
| Command (m for help): Changing display/entry units to sectors |
| |
| Command (m for help): Command action |
| e extended |
| p primary partition (1-4) |
| Partition number (1-4): First sector (2048-102399, default 2048): Using default value 2048 |
| Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): |
| Command (m for help): Command action |
| e extended |
| p primary partition (1-4) |
| Partition number (1-4): First sector (43008-102399, default 43008): Using default value 43008 |
| Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Using default value 102399 |
| |
| Command (m for help): |
| Disk /dev/sdb: 52 MB, 52428800 bytes |
| 32 heads, 32 sectors/track, 100 cylinders, total 102400 sectors |
| Units = sectors of 1 * 512 = 512 bytes |
| Sector size (logical/physical): 512 bytes / 4096 bytes |
| I/O size (minimum/optimal): 4096 bytes / 32768 bytes |
| |
| |
| Device Boot Start End Blocks Id System |
| /dev/sdb1 2048 43007 20480 83 Linux |
| /dev/sdb2 43008 102399 29696 83 Linux |
| |
| Command (m for help): The partition table has been altered! |
| |
| Calling ioctl() to re-read partition table. |
| Syncing disks. |
| Alignment offsets: |
| 0 |
| 0 |
| Create partitions (MD) |
| Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel |
| |
| Changes will remain in memory only, until you decide to write them. |
| After that, of course, the previous content won't be recoverable. |
| |
| Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite) |
| |
| The device presents a logical sector size that is smaller than |
| the physical sector size. Aligning to a physical sector (or optimal |
| I/O) size boundary is recommended, or performance may be impacted. |
| |
| WARNING: DOS-compatible mode is deprecated. It's strongly recommended to |
| switch off the mode (command 'c') and change display units to |
| sectors (command 'u'). |
| |
| Command (m for help): DOS Compatibility flag is not set |
| |
| Command (m for help): Changing display/entry units to sectors |
| |
| Command (m for help): Command action |
| e extended |
| p primary partition (1-4) |
| Partition number (1-4): First sector (2048-100095, default 2048): Using default value 2048 |
| Last sector, +sectors or +size{K,M,G} (2048-100095, default 100095): |
| Command (m for help): Command action |
| e extended |
| p primary partition (1-4) |
| Partition number (1-4): First sector (22528-100095, default 22528): Using default value 22528 |
| Last sector, +sectors or +size{K,M,G} (22528-100095, default 100095): |
| Command (m for help): |
| Disk /dev/md8: 51 MB, 51249152 bytes |
| 2 heads, 4 sectors/track, 12512 cylinders, total 100096 sectors |
| Units = sectors of 1 * 512 = 512 bytes |
| Sector size (logical/physical): 512 bytes / 4096 bytes |
| I/O size (minimum/optimal): 65536 bytes / 131072 bytes |
| |
| |
| Device Boot Start End Blocks Id System |
| /dev/md8p1 2048 22527 10240 83 Linux |
| /dev/md8p2 22528 43007 10240 83 Linux |
| |
| Command (m for help): The partition table has been altered! |
| |
| Calling ioctl() to re-read partition table. |
| Syncing disks. |
| Alignment offsets (MD): |
| 0 |
| 0 |