| /* |
| * (C) Copyright 2006 |
| * Texas Instruments, <www.ti.com> |
| * Richard Woodruff <r-woodruff2@ti.com> |
| * Syed Mohammed Khasim <x0khasim@ti.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef _OMAP3_SYS_H_ |
| #define _OMAP3_SYS_H_ |
| |
| #include <asm/arch/sizes.h> |
| |
| /* |
| * OMAP3 specific Section |
| */ |
| |
| /* Stuff on L3 Interconnect */ |
| #define SMX_APE_BASE 0x68000000 |
| |
| /* L3 Firewall */ |
| #define A_REQINFOPERM0 (SMX_APE_BASE + 0x05048) |
| #define A_READPERM0 (SMX_APE_BASE + 0x05050) |
| #define A_WRITEPERM0 (SMX_APE_BASE + 0x05058) |
| |
| /* GPMC */ |
| #define OMAP34XX_GPMC_BASE (0x6E000000) |
| |
| /* SMS */ |
| #define OMAP34XX_SMS_BASE 0x6C000000 |
| |
| /* SDRC */ |
| #define OMAP34XX_SDRC_BASE 0x6D000000 |
| |
| /* |
| * L4 Peripherals - L4 Wakeup and L4 Core now |
| */ |
| #define OMAP34XX_CORE_L4_IO_BASE 0x48000000 |
| |
| #define OMAP34XX_WAKEUP_L4_IO_BASE 0x48300000 |
| |
| #define OMAP34XX_L4_PER 0x49000000 |
| |
| #define OMAP34XX_L4_IO_BASE OMAP34XX_CORE_L4_IO_BASE |
| |
| /* CONTROL */ |
| #define OMAP34XX_CTRL_BASE (OMAP34XX_L4_IO_BASE+0x2000) |
| |
| /* TAP information dont know for 3430*/ |
| #define OMAP34XX_TAP_BASE (0x49000000) /*giving some junk for virtio */ |
| |
| /* UART */ |
| #define OMAP34XX_UART1 (OMAP34XX_L4_IO_BASE+0x6a000) |
| #define OMAP34XX_UART2 (OMAP34XX_L4_IO_BASE+0x6c000) |
| #define OMAP34XX_UART3 (OMAP34XX_L4_PER+0x20000) |
| |
| /* General Purpose Timers */ |
| #define OMAP34XX_GPT1 0x48318000 |
| #define OMAP34XX_GPT2 0x49032000 |
| #define OMAP34XX_GPT3 0x49034000 |
| #define OMAP34XX_GPT4 0x49036000 |
| #define OMAP34XX_GPT5 0x49038000 |
| #define OMAP34XX_GPT6 0x4903A000 |
| #define OMAP34XX_GPT7 0x4903C000 |
| #define OMAP34XX_GPT8 0x4903E000 |
| #define OMAP34XX_GPT9 0x49040000 |
| #define OMAP34XX_GPT10 0x48086000 |
| #define OMAP34XX_GPT11 0x48088000 |
| #define OMAP34XX_GPT12 0x48304000 |
| |
| /* WatchDog Timers (1 secure, 3 GP) */ |
| #define WD1_BASE (0x4830C000) |
| #define WD2_BASE (0x48314000) |
| #define WD3_BASE (0x49030000) |
| |
| /* 32KTIMER */ |
| #define SYNC_32KTIMER_BASE (0x48320000) |
| #define S32K_CR (SYNC_32KTIMER_BASE+0x10) |
| |
| /* |
| * SDP3430 specific Section |
| */ |
| |
| /* |
| * The 343x's chip selects are programmable. The mask ROM |
| * does configure CS0 to 0x08000000 before dispatch. So, if |
| * you want your code to live below that address, you have to |
| * be prepared to jump though hoops, to reset the base address. |
| * Same as in SDP3430 |
| */ |
| /* base address for indirect vectors (internal boot mode) */ |
| #define SRAM_OFFSET0 0x40000000 |
| #define SRAM_OFFSET1 0x00200000 |
| #define SRAM_OFFSET2 0x0000F800 |
| #define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2) |
| |
| #define LOW_LEVEL_SRAM_STACK 0x4020FFFC |
| |
| /* |
| * TODO: Are they required for AM3517? |
| */ |
| #if defined(CONFIG_3430SDP) || defined(CONFIG_OMAP3EVM) |
| /* FPGA on Debug board.*/ |
| #define ETH_CONTROL_REG (DEBUG_BASE+0x30b) |
| #define LAN_RESET_REGISTER (DEBUG_BASE+0x1c) |
| |
| #define DIP_SWITCH_INPUT_REG2 (DEBUG_BASE+0x60) |
| #define LED_REGISTER (DEBUG_BASE+0x40) |
| #define FPGA_REV_REGISTER (DEBUG_BASE+0x10) |
| #define EEPROM_MAIN_BRD (DEBUG_BASE+0x10000+0x1800) |
| #define EEPROM_CONN_BRD (DEBUG_BASE+0x10000+0x1900) |
| #define EEPROM_UI_BRD (DEBUG_BASE+0x10000+0x1A00) |
| #define EEPROM_MCAM_BRD (DEBUG_BASE+0x10000+0x1B00) |
| #define ENHANCED_UI_EE_NAME "750-2075" |
| #endif |
| |
| #endif /* _OMAP3430_SYS_H_ */ |
