| # LIBCURL_CHECK_CONFIG ([DEFAULT-ACTION], [MINIMUM-VERSION], |
| # [ACTION-IF-YES], [ACTION-IF-NO]) |
| # ---------------------------------------------------------- |
| # David Shaw <dshaw@jabberwocky.com> May-09-2006 |
| # |
| # Checks for libcurl. DEFAULT-ACTION is the string yes or no to |
| # specify whether to default to --with-libcurl or --without-libcurl. |
| # If not supplied, DEFAULT-ACTION is yes. MINIMUM-VERSION is the |
| # minimum version of libcurl to accept. Pass the version as a regular |
| # version number like 7.10.1. If not supplied, any version is |
| # accepted. ACTION-IF-YES is a list of shell commands to run if |
| # libcurl was successfully found and passed the various tests. |
| # ACTION-IF-NO is a list of shell commands that are run otherwise. |
| # Note that using --without-libcurl does run ACTION-IF-NO. |
| # |
| # This macro #defines HAVE_LIBCURL if a working libcurl setup is |
| # found, and sets @LIBCURL@ and @LIBCURL_CPPFLAGS@ to the necessary |
| # values. Other useful defines are LIBCURL_FEATURE_xxx where xxx are |
| # the various features supported by libcurl, and LIBCURL_PROTOCOL_yyy |
| # where yyy are the various protocols supported by libcurl. Both xxx |
| # and yyy are capitalized. See the list of AH_TEMPLATEs at the top of |
| # the macro for the complete list of possible defines. Shell |
| # variables $libcurl_feature_xxx and $libcurl_protocol_yyy are also |
| # defined to 'yes' for those features and protocols that were found. |
| # Note that xxx and yyy keep the same capitalization as in the |
| # curl-config list (e.g. it's "HTTP" and not "http"). |
| # |
| # Users may override the detected values by doing something like: |
| # LIBCURL="-lcurl" LIBCURL_CPPFLAGS="-I/usr/myinclude" ./configure |
| # |
| # For the sake of sanity, this macro assumes that any libcurl that is |
| # found is after version 7.7.2, the first version that included the |
| # curl-config script. Note that it is very important for people |
| # packaging binary versions of libcurl to include this script! |
| # Without curl-config, we can only guess what protocols are available, |
| # or use curl_version_info to figure it out at runtime. |
| |
| AC_DEFUN([LIBCURL_CHECK_CONFIG], |
| [ |
| AH_TEMPLATE([LIBCURL_FEATURE_SSL],[Defined if libcurl supports SSL]) |
| AH_TEMPLATE([LIBCURL_FEATURE_KRB4],[Defined if libcurl supports KRB4]) |
| AH_TEMPLATE([LIBCURL_FEATURE_IPV6],[Defined if libcurl supports IPv6]) |
| AH_TEMPLATE([LIBCURL_FEATURE_LIBZ],[Defined if libcurl supports libz]) |
| AH_TEMPLATE([LIBCURL_FEATURE_ASYNCHDNS],[Defined if libcurl supports AsynchDNS]) |
| AH_TEMPLATE([LIBCURL_FEATURE_IDN],[Defined if libcurl supports IDN]) |
| AH_TEMPLATE([LIBCURL_FEATURE_SSPI],[Defined if libcurl supports SSPI]) |
| AH_TEMPLATE([LIBCURL_FEATURE_NTLM],[Defined if libcurl supports NTLM]) |
| |
| AH_TEMPLATE([LIBCURL_PROTOCOL_HTTP],[Defined if libcurl supports HTTP]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_HTTPS],[Defined if libcurl supports HTTPS]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_FTP],[Defined if libcurl supports FTP]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_FTPS],[Defined if libcurl supports FTPS]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_FILE],[Defined if libcurl supports FILE]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_TELNET],[Defined if libcurl supports TELNET]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_LDAP],[Defined if libcurl supports LDAP]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_DICT],[Defined if libcurl supports DICT]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_TFTP],[Defined if libcurl supports TFTP]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_RTSP],[Defined if libcurl supports RTSP]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_POP3],[Defined if libcurl supports POP3]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_IMAP],[Defined if libcurl supports IMAP]) |
| AH_TEMPLATE([LIBCURL_PROTOCOL_SMTP],[Defined if libcurl supports SMTP]) |
| |
| AC_ARG_WITH(libcurl, |
| AC_HELP_STRING([--with-libcurl=PREFIX],[look for the curl library in PREFIX/lib and headers in PREFIX/include]), |
| [_libcurl_with=$withval],[_libcurl_with=ifelse([$1],,[yes],[$1])]) |
| |
| if test "$_libcurl_with" != "no" ; then |
| |
| AC_PROG_AWK |
| |
| _libcurl_version_parse="eval $AWK '{split(\$NF,A,\".\"); X=256*256*A[[1]]+256*A[[2]]+A[[3]]; print X;}'" |
| |
| _libcurl_try_link=yes |
| |
| if test -d "$_libcurl_with" ; then |
| LIBCURL_CPPFLAGS="-I$withval/include" |
| _libcurl_ldflags="-L$withval/lib" |
| AC_PATH_PROG([_libcurl_config],[curl-config],[], |
| ["$withval/bin"]) |
| else |
| AC_PATH_PROG([_libcurl_config],[curl-config],[],[$PATH]) |
| fi |
| |
| if test x$_libcurl_config != "x" ; then |
| AC_CACHE_CHECK([for the version of libcurl], |
| [libcurl_cv_lib_curl_version], |
| [libcurl_cv_lib_curl_version=`$_libcurl_config --version | $AWK '{print $[]2}'`]) |
| |
| _libcurl_version=`echo $libcurl_cv_lib_curl_version | $_libcurl_version_parse` |
| _libcurl_wanted=`echo ifelse([$2],,[0],[$2]) | $_libcurl_version_parse` |
| |
| if test $_libcurl_wanted -gt 0 ; then |
| AC_CACHE_CHECK([for libcurl >= version $2], |
| [libcurl_cv_lib_version_ok], |
| [ |
| if test $_libcurl_version -ge $_libcurl_wanted ; then |
| libcurl_cv_lib_version_ok=yes |
| else |
| libcurl_cv_lib_version_ok=no |
| fi |
| ]) |
| fi |
| |
| if test $_libcurl_wanted -eq 0 || test x$libcurl_cv_lib_version_ok = xyes ; then |
| if test x"$LIBCURL_CPPFLAGS" = "x" ; then |
| LIBCURL_CPPFLAGS=`$_libcurl_config --cflags` |
| fi |
| if test x"$LIBCURL" = "x" ; then |
| LIBCURL=`$_libcurl_config --libs` |
| |
| # This is so silly, but Apple actually has a bug in their |
| # curl-config script. Fixed in Tiger, but there are still |
| # lots of Panther installs around. |
| case "${host}" in |
| powerpc-apple-darwin7*) |
| LIBCURL=`echo $LIBCURL | sed -e 's|-arch i386||g'` |
| ;; |
| esac |
| fi |
| |
| # All curl-config scripts support --feature |
| _libcurl_features=`$_libcurl_config --feature` |
| |
| # Is it modern enough to have --protocols? (7.12.4) |
| if test $_libcurl_version -ge 461828 ; then |
| _libcurl_protocols=`$_libcurl_config --protocols` |
| fi |
| else |
| _libcurl_try_link=no |
| fi |
| |
| unset _libcurl_wanted |
| fi |
| |
| if test $_libcurl_try_link = yes ; then |
| |
| # we didn't find curl-config, so let's see if the user-supplied |
| # link line (or failing that, "-lcurl") is enough. |
| LIBCURL=${LIBCURL-"$_libcurl_ldflags -lcurl"} |
| |
| AC_CACHE_CHECK([whether libcurl is usable], |
| [libcurl_cv_lib_curl_usable], |
| [ |
| _libcurl_save_cppflags=$CPPFLAGS |
| CPPFLAGS="$LIBCURL_CPPFLAGS $CPPFLAGS" |
| _libcurl_save_libs=$LIBS |
| LIBS="$LIBCURL $LIBS" |
| |
| AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <curl/curl.h>]],[[ |
| /* Try and use a few common options to force a failure if we are |
| missing symbols or can't link. */ |
| int x; |
| curl_easy_setopt(NULL,CURLOPT_URL,NULL); |
| x=CURL_ERROR_SIZE; |
| x=CURLOPT_WRITEFUNCTION; |
| x=CURLOPT_FILE; |
| x=CURLOPT_ERRORBUFFER; |
| x=CURLOPT_STDERR; |
| x=CURLOPT_VERBOSE; |
| if (x) ; |
| ]])],libcurl_cv_lib_curl_usable=yes,libcurl_cv_lib_curl_usable=no) |
| |
| CPPFLAGS=$_libcurl_save_cppflags |
| LIBS=$_libcurl_save_libs |
| unset _libcurl_save_cppflags |
| unset _libcurl_save_libs |
| ]) |
| |
| if test $libcurl_cv_lib_curl_usable = yes ; then |
| |
| # Does curl_free() exist in this version of libcurl? |
| # If not, fake it with free() |
| |
| _libcurl_save_cppflags=$CPPFLAGS |
| CPPFLAGS="$CPPFLAGS $LIBCURL_CPPFLAGS" |
| _libcurl_save_libs=$LIBS |
| LIBS="$LIBS $LIBCURL" |
| |
| AC_CHECK_FUNC(curl_free,, |
| AC_DEFINE(curl_free,free, |
| [Define curl_free() as free() if our version of curl lacks curl_free.])) |
| |
| CPPFLAGS=$_libcurl_save_cppflags |
| LIBS=$_libcurl_save_libs |
| unset _libcurl_save_cppflags |
| unset _libcurl_save_libs |
| |
| AC_DEFINE(HAVE_LIBCURL,1, |
| [Define to 1 if you have a functional curl library.]) |
| AC_SUBST(LIBCURL_CPPFLAGS) |
| AC_SUBST(LIBCURL) |
| |
| for _libcurl_feature in $_libcurl_features ; do |
| AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_feature_$_libcurl_feature),[1]) |
| eval AS_TR_SH(libcurl_feature_$_libcurl_feature)=yes |
| done |
| |
| if test "x$_libcurl_protocols" = "x" ; then |
| |
| # We don't have --protocols, so just assume that all |
| # protocols are available |
| _libcurl_protocols="HTTP FTP FILE TELNET LDAP DICT TFTP" |
| |
| if test x$libcurl_feature_SSL = xyes ; then |
| _libcurl_protocols="$_libcurl_protocols HTTPS" |
| |
| # FTPS wasn't standards-compliant until version |
| # 7.11.0 (0x070b00 == 461568) |
| if test $_libcurl_version -ge 461568; then |
| _libcurl_protocols="$_libcurl_protocols FTPS" |
| fi |
| fi |
| |
| # RTSP, IMAP, POP3 and SMTP were added in |
| # 7.20.0 (0x071400 == 463872) |
| if test $_libcurl_version -ge 463872; then |
| _libcurl_protocols="$_libcurl_protocols RTSP IMAP POP3 SMTP" |
| fi |
| fi |
| |
| for _libcurl_protocol in $_libcurl_protocols ; do |
| AC_DEFINE_UNQUOTED(AS_TR_CPP(libcurl_protocol_$_libcurl_protocol),[1]) |
| eval AS_TR_SH(libcurl_protocol_$_libcurl_protocol)=yes |
| done |
| else |
| unset LIBCURL |
| unset LIBCURL_CPPFLAGS |
| fi |
| fi |
| |
| unset _libcurl_try_link |
| unset _libcurl_version_parse |
| unset _libcurl_config |
| unset _libcurl_feature |
| unset _libcurl_features |
| unset _libcurl_protocol |
| unset _libcurl_protocols |
| unset _libcurl_version |
| unset _libcurl_ldflags |
| fi |
| |
| if test x$_libcurl_with = xno || test x$libcurl_cv_lib_curl_usable != xyes ; then |
| # This is the IF-NO path |
| ifelse([$4],,:,[$4]) |
| else |
| # This is the IF-YES path |
| ifelse([$3],,:,[$3]) |
| fi |
| |
| unset _libcurl_with |
| ])dnl |