Project import
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..155b9b2
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,118 @@
+#
+# Copyright (c) 2010-2011 Nest, Inc.
+# All rights reserved.
+#
+# This document is the property of Nest. It is considered
+# confidential and proprietary information.
+#
+# This document may not be reproduced or transmitted in any form,
+# in whole or in part, without the express written permission of
+# Nest.
+#
+# Description:
+# This file is the makefile for the Expat XML parser library.
+#
+
+BuildConfigSpecialized := No
+BuildProductSpecialized := No
+
+include pre.mak
+
+PackageName := expat
+
+PackageExtension := tar.gz
+PackageSeparator := -
+
+PackagePatchArgs := -p1
+
+PackageArchive := $(PackageName).$(PackageExtension)
+PackageSourceDir := $(PackageName)$(PackageSeparator)$(PackageVersion)
+
+PackageBuildMakefile = $(call GenerateBuildPaths,Makefile)
+
+CleanPaths += $(PackageLicenseFile)
+
+all: $(PackageDefaultGoal)
+
+# Generate the package license contents.
+
+$(PackageSourceDir)/COPYING: source
+
+$(PackageLicenseFile): $(PackageSourceDir)/COPYING
+ $(copy-result)
+
+# Extract the source from the archive and apply patches, if any.
+
+$(PackageSourceDir): $(PackageArchive) $(PackagePatchPaths)
+ $(expand-and-patch-package)
+
+# Prepare the sources.
+
+.PHONY: source
+source: | $(PackageSourceDir)
+
+# Patch the sources, if necessary.
+
+.PHONY: patch
+patch: source
+
+# Generate the package build makefile.
+
+$(PackageBuildMakefile): | $(PackageSourceDir) $(BuildDirectory) $(ResultDirectory)
+ $(Verbose)cd $(BuildDirectory) && \
+ $(CURDIR)/$(PackageSourceDir)/configure \
+ CC="$(CC)" AR=$(AR) RANLIB=$(RANLIB) STRIP=$(STRIP) \
+ INSTALL="$(INSTALL) $(INSTALLFLAGS)" \
+ --build=$(HostTuple) \
+ --host=$(TargetTuple) \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --localstatedir=/var \
+ --disable-static
+
+# Configure the source for building.
+
+.PHONY: configure
+configure: source $(PackageBuildMakefile)
+
+# Build the source.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+
+.PHONY: build
+build: configure
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) all
+
+# Stage the build to a temporary installation area.
+#
+# We have to unset MAKEFLAGS since they confuse the package build otherwise.
+#
+# We explictly remove 'libexpat.la' because some packages that depend
+# on expat use libtool. If libtool finds a '*.la' file for a library,
+# it uses the value of 'libdir=<dir>' it finds. In our case, since
+# '--prefix=/usr' this value is '/usr/lib'. It then resolves '-lexpat'
+# to '/usr/lib/libexpat.so'. In a cross-compilation environment, this
+# is likely to be neither the right architecture nor the right
+# version to link against. In short, we lose.
+#
+# We could also handle this by removing DESTDIR and setting the prefix
+# to $(ResultDirectory); however, that results in libtool hard-coding
+# $(ResultDirectory) as the RPATH in the linked executables which is
+# NOT what we want either. We lose again.
+#
+# By removing the '*.la' file, we win by ensuring neither a
+# misdirected link nor an RPATH.
+
+.PHONY: stage
+stage: build | $(ResultDirectory)
+ $(Verbose)unset MAKEFLAGS && \
+ $(MAKE) $(JOBSFLAG) -C $(BuildDirectory) DESTDIR=$(ResultDirectory) install
+ $(Verbose)$(RM) $(RMFLAGS) $(call GenerateResultPaths,,usr/lib/libexpat.la)
+
+clean:
+ $(Verbose)$(RM) $(RMFLAGS) -r $(PackageSourceDir)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(BuildDirectory)
+ $(Verbose)$(RM) $(RMFLAGS) -r $(ResultDirectory)
+
+include post.mak
diff --git a/expat-2.0.1/COPYING b/expat-2.0.1/COPYING
new file mode 100755
index 0000000..dcb4506
--- /dev/null
+++ b/expat-2.0.1/COPYING
@@ -0,0 +1,22 @@
+Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd
+ and Clark Cooper
+Copyright (c) 2001, 2002, 2003, 2004, 2005, 2006 Expat maintainers.
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
diff --git a/expat-2.0.1/Changes b/expat-2.0.1/Changes
new file mode 100755
index 0000000..1e885ab
--- /dev/null
+++ b/expat-2.0.1/Changes
@@ -0,0 +1,169 @@
+Release 2.0.1 Tue June 5 2007
+ - Fixed bugs #1515266, 1515600: The character data handler's calling
+ of XML_StopParser() was not handled properly; if the parser was
+ stopped and the handler set to NULL, the parser would segfault.
+ - Fixed bug #1690883: Expat failed on EBCDIC systems as it assumed
+ some character constants to be ASCII encoded.
+ - Minor cleanups of the test harness.
+ - Fixed xmlwf bug #1513566: "out of memory" error on file size zero.
+ - Fixed outline.c bug #1543233: missing a final XML_ParserFree() call.
+ - Fixes and improvements for Windows platform:
+ bugs #1409451, #1476160, 1548182, 1602769, 1717322.
+ - Build fixes for various platforms:
+ HP-UX, Tru64, Solaris 9: patch #1437840, bug #1196180.
+ All Unix: #1554618 (refreshed config.sub/config.guess).
+ #1490371, #1613457: support both, DESTDIR and INSTALL_ROOT,
+ without relying on GNU-Make specific features.
+ #1647805: Patched configure.in to work better with Intel compiler.
+ - Fixes to Makefile.in to have make check work correctly:
+ bugs #1408143, #1535603, #1536684.
+ - Added Open Watcom support: patch #1523242.
+
+Release 2.0.0 Wed Jan 11 2006
+ - We no longer use the "check" library for C unit testing; we
+ always use the (partial) internal implementation of the API.
+ - Report XML_NS setting via XML_GetFeatureList().
+ - Fixed headers for use from C++.
+ - XML_GetCurrentLineNumber() and XML_GetCurrentColumnNumber()
+ now return unsigned integers.
+ - Added XML_LARGE_SIZE switch to enable 64-bit integers for
+ byte indexes and line/column numbers.
+ - Updated to use libtool 1.5.22 (the most recent).
+ - Added support for AmigaOS.
+ - Some mostly minor bug fixes. SF issues include: 1006708,
+ 1021776, 1023646, 1114960, 1156398, 1221160, 1271642.
+
+Release 1.95.8 Fri Jul 23 2004
+ - Major new feature: suspend/resume. Handlers can now request
+ that a parse be suspended for later resumption or aborted
+ altogether. See "Temporarily Stopping Parsing" in the
+ documentation for more details.
+ - Some mostly minor bug fixes, but compilation should no
+ longer generate warnings on most platforms. SF issues
+ include: 827319, 840173, 846309, 888329, 896188, 923913,
+ 928113, 961698, 985192.
+
+Release 1.95.7 Mon Oct 20 2003
+ - Fixed enum XML_Status issue (reported on SourceForge many
+ times), so compilers that are properly picky will be happy.
+ - Introduced an XMLCALL macro to control the calling
+ convention used by the Expat API; this macro should be used
+ to annotate prototypes and definitions of callback
+ implementations in code compiled with a calling convention
+ other than the default convention for the host platform.
+ - Improved ability to build without the configure-generated
+ expat_config.h header. This is useful for applications
+ which embed Expat rather than linking in the library.
+ - Fixed a variety of bugs: see SF issues 458907, 609603,
+ 676844, 679754, 692878, 692964, 695401, 699323, 699487,
+ 820946.
+ - Improved hash table lookups.
+ - Added more regression tests and improved documentation.
+
+Release 1.95.6 Tue Jan 28 2003
+ - Added XML_FreeContentModel().
+ - Added XML_MemMalloc(), XML_MemRealloc(), XML_MemFree().
+ - Fixed a variety of bugs: see SF issues 615606, 616863,
+ 618199, 653180, 673791.
+ - Enhanced the regression test suite.
+ - Man page improvements: includes SF issue 632146.
+
+Release 1.95.5 Fri Sep 6 2002
+ - Added XML_UseForeignDTD() for improved SAX2 support.
+ - Added XML_GetFeatureList().
+ - Defined XML_Bool type and the values XML_TRUE and XML_FALSE.
+ - Use an incomplete struct instead of a void* for the parser
+ (may not retain).
+ - Fixed UTF-8 decoding bug that caused legal UTF-8 to be rejected.
+ - Finally fixed bug where default handler would report DTD
+ events that were already handled by another handler.
+ Initial patch contributed by Darryl Miles.
+ - Removed unnecessary DllMain() function that caused static
+ linking into a DLL to be difficult.
+ - Added VC++ projects for building static libraries.
+ - Reduced line-length for all source code and headers to be
+ no longer than 80 characters, to help with AS/400 support.
+ - Reduced memory copying during parsing (SF patch #600964).
+ - Fixed a variety of bugs: see SF issues 580793, 434664,
+ 483514, 580503, 581069, 584041, 584183, 584832, 585537,
+ 596555, 596678, 598352, 598944, 599715, 600479, 600971.
+
+Release 1.95.4 Fri Jul 12 2002
+ - Added support for VMS, contributed by Craig Berry. See
+ vms/README.vms for more information.
+ - Added Mac OS (classic) support, with a makefile for MPW,
+ contributed by Thomas Wegner and Daryle Walker.
+ - Added Borland C++ Builder 5 / BCC 5.5 support, contributed
+ by Patrick McConnell (SF patch #538032).
+ - Fixed a variety of bugs: see SF issues 441449, 563184,
+ 564342, 566334, 566901, 569461, 570263, 575168, 579196.
+ - Made skippedEntityHandler conform to SAX2 (see source comment)
+ - Re-implemented WFC: Entity Declared from XML 1.0 spec and
+ added a new error "entity declared in parameter entity":
+ see SF bug report 569461 and SF patch 578161
+ - Re-implemented section 5.1 from XML 1.0 spec:
+ see SF bug report 570263 and SF patch 578161
+
+Release 1.95.3 Mon Jun 3 2002
+ - Added a project to the MSVC workspace to create a wchar_t
+ version of the library; the DLLs are named libexpatw.dll.
+ - Changed the name of the Windows DLLs from expat.dll to
+ libexpat.dll; this fixes SF bug #432456.
+ - Added the XML_ParserReset() API function.
+ - Fixed XML_SetReturnNSTriplet() to work for element names.
+ - Made the XML_UNICODE builds usable (thanks, Karl!).
+ - Allow xmlwf to read from standard input.
+ - Install a man page for xmlwf on Unix systems.
+ - Fixed many bugs; see SF bug reports 231864, 461380, 464837,
+ 466885, 469226, 477667, 484419, 487840, 494749, 496505,
+ 547350. Other bugs which we can't test as easily may also
+ have been fixed, especially in the area of build support.
+
+Release 1.95.2 Fri Jul 27 2001
+ - More changes to make MSVC happy with the build; add a single
+ workspace to support both the library and xmlwf application.
+ - Added a Windows installer for Windows users; includes
+ xmlwf.exe.
+ - Added compile-time constants that can be used to determine the
+ Expat version
+ - Removed a lot of GNU-specific dependencies to aide portability
+ among the various Unix flavors.
+ - Fix the UTF-8 BOM bug.
+ - Cleaned up warning messages for several compilers.
+ - Added the -Wall, -Wstrict-prototypes options for GCC.
+
+Release 1.95.1 Sun Oct 22 15:11:36 EDT 2000
+ - Changes to get expat to build under Microsoft compiler
+ - Removed all aborts and instead return an UNEXPECTED_STATE error.
+ - Fixed a bug where a stray '%' in an entity value would cause an
+ abort.
+ - Defined XML_SetEndNamespaceDeclHandler. Thanks to Darryl Miles for
+ finding this oversight.
+ - Changed default patterns in lib/Makefile.in to fit non-GNU makes
+ Thanks to robin@unrated.net for reporting and providing an
+ account to test on.
+ - The reference had the wrong label for XML_SetStartNamespaceDecl.
+ Reported by an anonymous user.
+
+Release 1.95.0 Fri Sep 29 2000
+ - XML_ParserCreate_MM
+ Allows you to set a memory management suite to replace the
+ standard malloc,realloc, and free.
+ - XML_SetReturnNSTriplet
+ If you turn this feature on when namespace processing is in
+ effect, then qualified, prefixed element and attribute names
+ are returned as "uri|name|prefix" where '|' is whatever
+ separator character is used in namespace processing.
+ - Merged in features from perl-expat
+ o XML_SetElementDeclHandler
+ o XML_SetAttlistDeclHandler
+ o XML_SetXmlDeclHandler
+ o XML_SetEntityDeclHandler
+ o StartDoctypeDeclHandler takes 3 additional parameters:
+ sysid, pubid, has_internal_subset
+ o Many paired handler setters (like XML_SetElementHandler)
+ now have corresponding individual handler setters
+ o XML_GetInputContext for getting the input context of
+ the current parse position.
+ - Added reference material
+ - Packaged into a distribution that builds a sharable library
diff --git a/expat-2.0.1/MANIFEST b/expat-2.0.1/MANIFEST
new file mode 100755
index 0000000..aa83d5b
--- /dev/null
+++ b/expat-2.0.1/MANIFEST
@@ -0,0 +1,128 @@
+amiga/stdlib.c
+amiga/launch.c
+amiga/expat_vectors.c
+amiga/expat_lib.c
+amiga/expat.xml
+amiga/README.txt
+amiga/Makefile
+amiga/include/proto/expat.h
+amiga/include/libraries/expat.h
+amiga/include/interfaces/expat.h
+amiga/include/inline4/expat.h
+bcb5/README.txt
+bcb5/all_projects.bpg
+bcb5/elements.bpf
+bcb5/elements.bpr
+bcb5/elements.mak
+bcb5/expat.bpf
+bcb5/expat.bpr
+bcb5/expat.mak
+bcb5/expat_static.bpf
+bcb5/expat_static.bpr
+bcb5/expat_static.mak
+bcb5/expatw.bpf
+bcb5/expatw.bpr
+bcb5/expatw.mak
+bcb5/expatw_static.bpf
+bcb5/expatw_static.bpr
+bcb5/expatw_static.mak
+bcb5/libexpat_mtd.def
+bcb5/libexpatw_mtd.def
+bcb5/makefile.mak
+bcb5/outline.bpf
+bcb5/outline.bpr
+bcb5/outline.mak
+bcb5/setup.bat
+bcb5/xmlwf.bpf
+bcb5/xmlwf.bpr
+bcb5/xmlwf.mak
+doc/expat.png
+doc/reference.html
+doc/style.css
+doc/valid-xhtml10.png
+doc/xmlwf.1
+doc/xmlwf.sgml
+COPYING
+Changes
+MANIFEST
+Makefile.in
+README
+configure
+configure.in
+expat_config.h.in
+expat.dsw
+conftools/PrintPath
+conftools/ac_c_bigendian_cross.m4
+conftools/config.guess
+conftools/config.sub
+conftools/expat.m4
+conftools/get-version.sh
+conftools/install-sh
+conftools/libtool.m4
+conftools/ltmain.sh
+conftools/mkinstalldirs
+examples/elements.c
+examples/elements.dsp
+examples/outline.c
+examples/outline.dsp
+lib/Makefile.MPW
+lib/amigaconfig.h
+lib/ascii.h
+lib/asciitab.h
+lib/expat.dsp
+lib/expat.h
+lib/expat_external.h
+lib/expat_static.dsp
+lib/expatw.dsp
+lib/expatw_static.dsp
+lib/iasciitab.h
+lib/internal.h
+lib/latin1tab.h
+lib/libexpat.def
+lib/libexpatw.def
+lib/macconfig.h
+lib/nametab.h
+lib/utf8tab.h
+lib/winconfig.h
+lib/xmlparse.c
+lib/xmlrole.c
+lib/xmlrole.h
+lib/xmltok.c
+lib/xmltok.h
+lib/xmltok_impl.c
+lib/xmltok_impl.h
+lib/xmltok_ns.c
+tests/benchmark/README.txt
+tests/benchmark/benchmark.c
+tests/benchmark/benchmark.dsp
+tests/benchmark/benchmark.dsw
+tests/README.txt
+tests/chardata.c
+tests/chardata.h
+tests/minicheck.c
+tests/minicheck.h
+tests/runtests.c
+tests/runtestspp.cpp
+tests/xmltest.sh
+vms/README.vms
+vms/descrip.mms
+vms/expat_config.h
+win32/MANIFEST.txt
+win32/README.txt
+win32/expat.iss
+xmlwf/codepage.c
+xmlwf/codepage.h
+xmlwf/ct.c
+xmlwf/filemap.h
+xmlwf/readfilemap.c
+xmlwf/unixfilemap.c
+xmlwf/win32filemap.c
+xmlwf/xmlfile.c
+xmlwf/xmlfile.h
+xmlwf/xmlmime.c
+xmlwf/xmlmime.h
+xmlwf/xmltchar.h
+xmlwf/xmlurl.h
+xmlwf/xmlwf.c
+xmlwf/xmlwf.dsp
+xmlwf/xmlwin32url.cxx
diff --git a/expat-2.0.1/Makefile.in b/expat-2.0.1/Makefile.in
new file mode 100755
index 0000000..0e2cc95
--- /dev/null
+++ b/expat-2.0.1/Makefile.in
@@ -0,0 +1,187 @@
+################################################################
+# Process this file with top-level configure script to produce Makefile
+#
+# Copyright 2000 Clark Cooper
+#
+# This file is part of EXPAT.
+#
+# EXPAT is free software; you can redistribute it and/or modify it
+# under the terms of the License (based on the MIT/X license) contained
+# in the file COPYING that comes with this distribution.
+#
+# EXPAT IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+# EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+# IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+# CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+# TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+# SOFTWARE OR THE USE OR OTHER DEALINGS IN EXPAT.
+#
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+libdir = @libdir@
+includedir = @includedir@
+man1dir = @mandir@/man1
+
+top_builddir = .
+
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+mkinstalldirs = $(SHELL) $(top_srcdir)/conftools/mkinstalldirs
+
+MANFILE = $(srcdir)/doc/xmlwf.1
+APIHEADER = $(srcdir)/lib/expat.h $(srcdir)/lib/expat_external.h
+LIBRARY = libexpat.la
+
+DESTDIR = $(INSTALL_ROOT)
+
+default: buildlib xmlwf/xmlwf
+
+buildlib: $(LIBRARY)
+
+all: $(LIBRARY) xmlwf/xmlwf examples/elements examples/outline
+
+clean:
+ cd lib && rm -f $(LIBRARY) *.o *.lo && rm -rf .libs _libs
+ cd xmlwf && rm -f xmlwf *.o *.lo && rm -rf .libs _libs
+ cd examples && rm -f elements outline *.o *.lo && rm -rf .libs _libs
+ cd tests && rm -rf .libs runtests runtests.o runtestspp runtestspp.o
+ cd tests && rm -f chardata.o minicheck.o
+ rm -rf .libs libexpat.la
+ rm -f examples/core tests/core xmlwf/core
+
+clobber: clean
+
+distclean: clean
+ rm -f expat_config.h config.status config.log config.cache libtool
+ rm -f Makefile
+
+extraclean: distclean
+ rm -f expat_config.h.in configure
+ rm -f conftools/ltconfig conftools/ltmain.sh conftools/libtool.m4
+
+check: tests/runtests tests/runtestspp
+ tests/runtests
+ tests/runtestspp
+
+install: xmlwf/xmlwf installlib
+ $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir)
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) xmlwf/xmlwf $(DESTDIR)$(bindir)/xmlwf
+ $(INSTALL_DATA) $(MANFILE) $(DESTDIR)$(man1dir)
+
+installlib: $(LIBRARY) $(APIHEADER)
+ $(mkinstalldirs) $(DESTDIR)$(libdir) $(DESTDIR)$(includedir)
+ $(LIBTOOL) --mode=install $(INSTALL) $(LIBRARY) $(DESTDIR)$(libdir)/$(LIBRARY)
+ for FN in $(APIHEADER) ; do $(INSTALL_DATA) $$FN $(DESTDIR)$(includedir) ; done
+
+uninstall: uninstalllib
+ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(bindir)/xmlwf
+ rm -f $(DESTDIR)$(man1dir)/xmlwf.1
+
+uninstalllib:
+ $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$(LIBRARY)
+ rm -f $(DESTDIR)$(includedir)/expat.h
+ rm -f $(DESTDIR)$(includedir)/expat_external.h
+
+# for VPATH builds (invoked by configure)
+mkdir-init:
+ @for d in lib xmlwf examples tests ; do \
+ (mkdir $$d 2> /dev/null || test 1) ; \
+ done
+
+CC = @CC@
+CXX = @CXX@
+LIBTOOL = @LIBTOOL@
+
+INCLUDES = -I$(srcdir)/lib -I.
+LDFLAGS = @LDFLAGS@
+CPPFLAGS = @CPPFLAGS@ -DHAVE_EXPAT_CONFIG_H
+CFLAGS = @CFLAGS@
+CXXFLAGS = @CXXFLAGS@
+VSNFLAG = -version-info @LIBCURRENT@:@LIBREVISION@:@LIBAGE@
+
+### autoconf this?
+LTFLAGS = --silent
+
+COMPILE = $(CC) $(INCLUDES) $(CFLAGS) $(DEFS) $(CPPFLAGS)
+CXXCOMPILE = $(CXX) $(INCLUDES) $(CXXFLAGS) $(DEFS) $(CPPFLAGS)
+LTCOMPILE = $(LIBTOOL) $(LTFLAGS) --mode=compile $(COMPILE)
+LINK_LIB = $(LIBTOOL) $(LTFLAGS) --mode=link $(COMPILE) -no-undefined $(VSNFLAG) -rpath $(libdir) $(LDFLAGS) -o $@
+LINK_EXE = $(LIBTOOL) $(LTFLAGS) --mode=link $(COMPILE) $(LDFLAGS) -o $@
+LINK_CXX_EXE = $(LIBTOOL) $(LTFLAGS) --mode=link $(CXXCOMPILE) $(LDFLAGS) -o $@
+
+LIB_OBJS = lib/xmlparse.lo lib/xmltok.lo lib/xmlrole.lo
+$(LIBRARY): $(LIB_OBJS)
+ $(LINK_LIB) $(LIB_OBJS)
+
+lib/xmlparse.lo: lib/xmlparse.c lib/expat.h lib/xmlrole.h lib/xmltok.h \
+ $(top_builddir)/expat_config.h lib/expat_external.h lib/internal.h
+
+lib/xmlrole.lo: lib/xmlrole.c lib/ascii.h lib/xmlrole.h \
+ $(top_builddir)/expat_config.h lib/expat_external.h lib/internal.h
+
+lib/xmltok.lo: lib/xmltok.c lib/xmltok_impl.c lib/xmltok_ns.c \
+ lib/ascii.h lib/asciitab.h lib/iasciitab.h lib/latin1tab.h \
+ lib/nametab.h lib/utf8tab.h lib/xmltok.h lib/xmltok_impl.h \
+ $(top_builddir)/expat_config.h lib/expat_external.h lib/internal.h
+
+
+XMLWF_OBJS = xmlwf/xmlwf.o xmlwf/xmlfile.o xmlwf/codepage.o xmlwf/@FILEMAP@.o
+xmlwf/xmlwf.o: xmlwf/xmlwf.c
+xmlwf/xmlfile.o: xmlwf/xmlfile.c
+xmlwf/codepage.o: xmlwf/codepage.c
+xmlwf/@FILEMAP@.o: xmlwf/@FILEMAP@.c
+xmlwf/xmlwf: $(XMLWF_OBJS) $(LIBRARY)
+ $(LINK_EXE) $(XMLWF_OBJS) $(LIBRARY)
+
+examples/elements.o: examples/elements.c
+examples/elements: examples/elements.o $(LIBRARY)
+ $(LINK_EXE) $< $(LIBRARY)
+
+examples/outline.o: examples/outline.c
+examples/outline: examples/outline.o $(LIBRARY)
+ $(LINK_EXE) $< $(LIBRARY)
+
+tests/chardata.o: tests/chardata.c tests/chardata.h
+tests/minicheck.o: tests/minicheck.c tests/minicheck.h
+tests/runtests.o: tests/runtests.c tests/chardata.h
+tests/runtests: tests/runtests.o tests/chardata.o tests/minicheck.o $(LIBRARY)
+ $(LINK_EXE) tests/runtests.o tests/chardata.o tests/minicheck.o $(LIBRARY)
+tests/runtestspp.o: tests/runtestspp.cpp tests/runtests.c tests/chardata.h
+tests/runtestspp: tests/runtestspp.o tests/chardata.o tests/minicheck.o $(LIBRARY)
+ $(LINK_CXX_EXE) tests/runtestspp.o tests/chardata.o tests/minicheck.o $(LIBRARY)
+
+tests/xmlts.zip:
+ wget --output-document=tests/xmlts.zip \
+ http://www.w3.org/XML/Test/xmlts20020606.zip
+
+tests/XML-Test-Suite: tests/xmlts.zip
+ cd tests && unzip -q xmlts.zip
+
+run-xmltest: xmlwf/xmlwf tests/XML-Test-Suite
+ tests/xmltest.sh
+
+.SUFFIXES: .c .cpp .lo .o
+
+.cpp.o:
+ $(CXXCOMPILE) -o $@ -c $<
+.c.o:
+ $(COMPILE) -o $@ -c $<
+.c.lo:
+ $(LTCOMPILE) -o $@ -c $<
+
+.PHONY: buildlib all \
+ clean distclean extraclean maintainer-clean \
+ dist distdir \
+ install uninstall
diff --git a/expat-2.0.1/README b/expat-2.0.1/README
new file mode 100755
index 0000000..fda282a
--- /dev/null
+++ b/expat-2.0.1/README
@@ -0,0 +1,137 @@
+
+ Expat, Release 2.0.1
+
+This is Expat, a C library for parsing XML, written by James Clark.
+Expat is a stream-oriented XML parser. This means that you register
+handlers with the parser before starting the parse. These handlers
+are called when the parser discovers the associated structures in the
+document being parsed. A start tag is an example of the kind of
+structures for which you may register handlers.
+
+Windows users should use the expat_win32bin package, which includes
+both precompiled libraries and executables, and source code for
+developers.
+
+Expat is free software. You may copy, distribute, and modify it under
+the terms of the License contained in the file COPYING distributed
+with this package. This license is the same as the MIT/X Consortium
+license.
+
+Versions of Expat that have an odd minor version (the middle number in
+the release above), are development releases and should be considered
+as beta software. Releases with even minor version numbers are
+intended to be production grade software.
+
+If you are building Expat from a check-out from the CVS repository,
+you need to run a script that generates the configure script using the
+GNU autoconf and libtool tools. To do this, you need to have
+autoconf 2.52 or newer and libtool 1.4 or newer (1.5 or newer preferred).
+Run the script like this:
+
+ ./buildconf.sh
+
+Once this has been done, follow the same instructions as for building
+from a source distribution.
+
+To build Expat from a source distribution, you first run the
+configuration shell script in the top level distribution directory:
+
+ ./configure
+
+There are many options which you may provide to configure (which you
+can discover by running configure with the --help option). But the
+one of most interest is the one that sets the installation directory.
+By default, the configure script will set things up to install
+libexpat into /usr/local/lib, expat.h into /usr/local/include, and
+xmlwf into /usr/local/bin. If, for example, you'd prefer to install
+into /home/me/mystuff/lib, /home/me/mystuff/include, and
+/home/me/mystuff/bin, you can tell configure about that with:
+
+ ./configure --prefix=/home/me/mystuff
+
+Another interesting option is to enable 64-bit integer support for
+line and column numbers and the over-all byte index:
+
+ ./configure CPPFLAGS=-DXML_LARGE_SIZE
+
+However, such a modification would be a breaking change to the ABI
+and is therefore not recommended for general use - e.g. as part of
+a Linux distribution - but rather for builds with special requirements.
+
+After running the configure script, the "make" command will build
+things and "make install" will install things into their proper
+location. Have a look at the "Makefile" to learn about additional
+"make" options. Note that you need to have write permission into
+the directories into which things will be installed.
+
+If you are interested in building Expat to provide document
+information in UTF-16 rather than the default UTF-8, follow these
+instructions (after having run "make distclean"):
+
+ 1. For UTF-16 output as unsigned short (and version/error
+ strings as char), run:
+
+ ./configure CPPFLAGS=-DXML_UNICODE
+
+ For UTF-16 output as wchar_t (incl. version/error strings),
+ run:
+
+ ./configure CFLAGS="-g -O2 -fshort-wchar" \
+ CPPFLAGS=-DXML_UNICODE_WCHAR_T
+
+ 2. Edit the MakeFile, changing:
+
+ LIBRARY = libexpat.la
+
+ to:
+
+ LIBRARY = libexpatw.la
+
+ (Note the additional "w" in the library name.)
+
+ 3. Run "make buildlib" (which builds the library only).
+ Or, to save step 2, run "make buildlib LIBRARY=libexpatw.la".
+
+ 4. Run "make installlib" (which installs the library only).
+ Or, if step 2 was omitted, run "make installlib LIBRARY=libexpatw.la".
+
+Using DESTDIR or INSTALL_ROOT is enabled, with INSTALL_ROOT being the default
+value for DESTDIR, and the rest of the make file using only DESTDIR.
+It works as follows:
+ $ make install DESTDIR=/path/to/image
+overrides the in-makefile set DESTDIR, while both
+ $ INSTALL_ROOT=/path/to/image make install
+ $ make install INSTALL_ROOT=/path/to/image
+use DESTDIR=$(INSTALL_ROOT), even if DESTDIR eventually is defined in the
+environment, because variable-setting priority is
+1) commandline
+2) in-makefile
+3) environment
+
+Note for Solaris users: The "ar" command is usually located in
+"/usr/ccs/bin", which is not in the default PATH. You will need to
+add this to your path for the "make" command, and probably also switch
+to GNU make (the "make" found in /usr/ccs/bin does not seem to work
+properly -- appearantly it does not understand .PHONY directives). If
+you're using ksh or bash, use this command to build:
+
+ PATH=/usr/ccs/bin:$PATH make
+
+When using Expat with a project using autoconf for configuration, you
+can use the probing macro in conftools/expat.m4 to determine how to
+include Expat. See the comments at the top of that file for more
+information.
+
+A reference manual is available in the file doc/reference.html in this
+distribution.
+
+The homepage for this project is http://www.libexpat.org/. There
+are links there to connect you to the bug reports page. If you need
+to report a bug when you don't have access to a browser, you may also
+send a bug report by email to expat-bugs@mail.libexpat.org.
+
+Discussion related to the direction of future expat development takes
+place on expat-discuss@mail.libexpat.org. Archives of this list and
+other Expat-related lists may be found at:
+
+ http://mail.libexpat.org/mailman/listinfo/
diff --git a/expat-2.0.1/amiga/Makefile b/expat-2.0.1/amiga/Makefile
new file mode 100755
index 0000000..8450dd5
--- /dev/null
+++ b/expat-2.0.1/amiga/Makefile
@@ -0,0 +1,187 @@
+#
+# Makefile for AmigaOS
+#
+
+.PHONY: help all staticlib sharedlib check clean install
+
+vpath %.c ../lib ../examples ../xmlwf ../tests
+vpath %.h ../lib ../tests
+
+
+#
+# Set these for SDK installation.
+#
+tooldir = SDK:Local/C
+staticlibdir = SDK:Local/clib2/lib
+staticincludedir = SDK:Local/clib2/include
+sharedlibdir = SDK:Local/Libs
+sharedincludedir = SDK:Local/common/include
+
+
+ifeq ($(MAKECMDGOALS), staticlib)
+ DESTDIR = lib
+else
+ DESTDIR = libs
+endif
+
+STATICLIB = $(DESTDIR)/libexpat.a
+SHAREDLIB = $(DESTDIR)/expat.library
+
+XMLWF = $(DESTDIR)/xmlwf
+ELEMENTS = $(DESTDIR)/elements
+OUTLINE = $(DESTDIR)/outline
+RUNTESTS = $(DESTDIR)/runtests
+BENCHMARK = $(DESTDIR)/benchmark
+
+
+help:
+ @echo "Requires:"
+ @echo " AmigaOS 4.0"
+ @echo " SDK 51.22"
+ @echo " clib2 1.202"
+ @echo ""
+ @echo "Targets:"
+ @echo " all - make expat libraries, xmlwf, examples and run test suite"
+ @echo " install - install expat libraries and tools into SDK"
+
+all:
+ -makedir force lib libs
+ $(MAKE) staticlib
+ $(MAKE) sharedlib
+
+staticlib: $(STATICLIB) $(XMLWF) $(ELEMENTS) $(OUTLINE) $(RUNTESTS) $(BENCHMARK) check
+ @echo done
+
+sharedlib: $(SHAREDLIB) $(XMLWF) $(ELEMENTS) $(OUTLINE) $(RUNTESTS) $(BENCHMARK) check
+ @echo done
+
+check:
+ $(RUNTESTS)
+
+clean:
+ -delete lib/#?.o quiet
+ -delete libs/#?.o quiet
+
+install:
+ copy libs/xmlwf $(tooldir) quiet
+ copy /lib/expat.h /lib/expat_external.h $(staticincludedir) quiet
+ copy lib/libexpat.a $(staticlibdir) quiet
+ copy libs/expat.library $(sharedlibdir) quiet
+ copy include $(sharedincludedir) quiet all
+
+
+CC = gcc
+LIBTOOL = ar
+STRIP = strip
+
+LDFLAGS =
+LIBS =
+CFLAGS = -DNDEBUG -O2
+LTFLAGS = -crs
+STRIPFLAGS = -R.comment
+LAUNCH =
+
+ifeq ($(MAKECMDGOALS), staticlib)
+ CFLAGS += -mcrt=clib2
+ LDFLAGS += -mcrt=clib2
+ LIBS += $(STATICLIB)
+ INCLUDES = -I../lib
+endif
+
+ifeq ($(MAKECMDGOALS), sharedlib)
+ CFLAGS += -mcrt=newlib -D__USE_INLINE__
+ LDFLAGS += -mcrt=newlib
+ INCLUDES = -I. -Iinclude -Iinclude/libraries -I../lib
+ LAUNCH = $(DESTDIR)/launch.o
+endif
+
+
+COMPILE = $(CC) $(CFLAGS) $(INCLUDES) -c
+
+LINK = $(CC) $(LDFLAGS) -o $@
+
+
+$(STATICLIB): $(DESTDIR)/xmlparse.o $(DESTDIR)/xmltok.o $(DESTDIR)/xmlrole.o
+ $(LIBTOOL) $(LTFLAGS) $@ $^
+
+$(DESTDIR)/xmlparse.o: xmlparse.c expat.h xmlrole.h xmltok.h \
+ expat_external.h internal.h amigaconfig.h
+ $(COMPILE) $< -o $@
+
+$(DESTDIR)/xmlrole.o: xmlrole.c ascii.h xmlrole.h expat_external.h \
+ internal.h amigaconfig.h
+ $(COMPILE) $< -o $@
+
+$(DESTDIR)/xmltok.o: xmltok.c xmltok_impl.c xmltok_ns.c ascii.h asciitab.h \
+ iasciitab.h latin1tab.h nametab.h utf8tab.h xmltok.h xmltok_impl.h \
+ expat_external.h internal.h amigaconfig.h
+ $(COMPILE) $< -o $@
+
+
+$(SHAREDLIB): $(DESTDIR)/expat_lib.o $(DESTDIR)/expat_vectors.o $(DESTDIR)/stdlib.o lib/libexpat.a
+ $(LINK) -nostartfiles -nostdlib -o $@ $^
+
+$(DESTDIR)/expat_lib.o: expat_lib.c
+ $(COMPILE) $< -o $@
+
+$(DESTDIR)/expat_vectors.o: expat_vectors.c
+ $(COMPILE) $< -o $@
+
+$(DESTDIR)/stdlib.o: stdlib.c
+ $(COMPILE) $< -o $@
+
+$(LAUNCH): launch.c
+ $(COMPILE) $< -o $@
+
+
+$(XMLWF): $(DESTDIR)/xmlwf.o $(DESTDIR)/xmlfile.o $(DESTDIR)/codepage.o $(DESTDIR)/readfilemap.o $(LAUNCH)
+ $(LINK) $^ $(LIBS)
+ $(STRIP) $(STRIPFLAGS) $@
+
+$(DESTDIR)/xmlwf.o: xmlwf.c
+ $(COMPILE) $< -o $@
+
+$(DESTDIR)/xmlfile.o: xmlfile.c
+ $(COMPILE) $< -o $@
+
+$(DESTDIR)/codepage.o: codepage.c
+ $(COMPILE) $< -o $@
+
+$(DESTDIR)/readfilemap.o: readfilemap.c
+ $(COMPILE) $< -o $@
+
+
+$(ELEMENTS): $(DESTDIR)/elements.o $(LAUNCH)
+ $(LINK) $^ $(LIBS)
+ $(STRIP) $(STRIPFLAGS) $@
+
+$(DESTDIR)/elements.o: elements.c
+ $(COMPILE) $< -o $@
+
+
+$(OUTLINE): $(DESTDIR)/outline.o $(LAUNCH)
+ $(LINK) $^ $(LIBS)
+ $(STRIP) $(STRIPFLAGS) $@
+
+$(DESTDIR)/outline.o: outline.c
+ $(COMPILE) $< -o $@
+
+
+$(RUNTESTS): $(DESTDIR)/runtests.o $(DESTDIR)/chardata.o $(DESTDIR)/minicheck.o $(LAUNCH)
+ $(LINK) $^ $(LIBS)
+
+$(DESTDIR)/chardata.o: chardata.c chardata.h
+ $(COMPILE) $< -o $@
+
+$(DESTDIR)/minicheck.o: minicheck.c minicheck.h
+ $(COMPILE) $< -o $@
+
+$(DESTDIR)/runtests.o: runtests.c chardata.h
+ $(COMPILE) $< -o $@
+
+
+$(BENCHMARK): $(DESTDIR)/benchmark.o $(LAUNCH)
+ $(LINK) $^ $(LIBS) -lm
+
+$(DESTDIR)/benchmark.o: benchmark/benchmark.c
+ $(COMPILE) $< -o $@
diff --git a/expat-2.0.1/amiga/README.txt b/expat-2.0.1/amiga/README.txt
new file mode 100755
index 0000000..149518f
--- /dev/null
+++ b/expat-2.0.1/amiga/README.txt
@@ -0,0 +1,66 @@
+SUMMARY
+=======
+This is a port of expat for AmigaOS 4.0 which includes the
+SDK, some XML tools and the libraries.
+
+Both static and shared library versions are supported.
+
+The static library version is limited to clib2 although it should
+be possible to use newlib with the appopriate compile options.
+
+The shared library version is based on the work of Fredrik Wikstrom
+and is currently limited to PPC only.
+
+
+HISTORY
+=======
+4.2 - updated to correspond to Expat 2.0.1 release
+ - bumped copyright banners and versions
+ - simplified amigaconfig.h
+ - updated include/libraries/expat.h file
+ - modified launch.c to use contructor/deconstructor
+ - removed need for amiga_main() from expat utilities
+
+4.1 - fixed memory freeing bug in shared library version
+ - now allocates shared memory
+
+4.0 - updated for corresponding Expat 2.0 release
+ - some minor CVS related changes
+
+3.1 - removed obsolete sfd file
+ - added library description xml file
+ - refactored Makefile
+ - removed extraneous VARARGS68K keywords
+ - reworked default memory handling functions in shared lib
+ - updated amigaconfig.h
+
+3.0 - initial release
+ - based on expat 1.95.8
+
+
+BUILDING
+========
+To build expat.library, xmlwf tool, examples and run the test suite,
+simply type 'make all' in the amiga subdirectory.
+
+The test suite will compile and run for both the static and shared
+library versions.
+
+
+INSTALLATION
+============
+To install both static and shared versions of expat into the
+AmigaOS SDK type 'make install' in the amiga subdirectory.
+
+
+CONFIGURATION
+=============
+You may want to edit the lib/amigaconfig.h file to remove
+DTD and/or XML namespace support if they are not required by your
+specific application for a smaller and faster implementation.
+
+
+TO DO
+=====
+- wide character support (UTF-16)
+- provide 68k backwards compatibility
diff --git a/expat-2.0.1/amiga/expat.xml b/expat-2.0.1/amiga/expat.xml
new file mode 100755
index 0000000..d6aeae2
--- /dev/null
+++ b/expat-2.0.1/amiga/expat.xml
@@ -0,0 +1,264 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+<!DOCTYPE library SYSTEM "library.dtd">
+<!-- autogenerated by fdtrans v51.16 -->
+<library name="expat" basename="ExpatBase" basetype="Library" openname="expat.library">
+ <include>libraries/expat.h</include>
+ <interface name="main" version="1.0" struct="ExpatIFace" prefix="_Expat_" asmprefix="IExpat" global="IExpat">
+ <method name="Obtain" result="uint32"/>
+ <method name="Release" result="uint32"/>
+ <method name="Expunge" result="void" status="unimplemented"/>
+ <method name="Clone" result="struct Interface *" status="unimplemented"/>
+ <method name="XML_ParserCreate" result="XML_Parser">
+ <arg name="encodingName" type="const XML_Char *"/>
+ </method>
+ <method name="XML_ParserCreateNS" result="XML_Parser">
+ <arg name="encodingName" type="const XML_Char *"/>
+ <arg name="nsSep" type="XML_Char"/>
+ </method>
+ <method name="XML_ParserCreate_MM" result="XML_Parser">
+ <arg name="encoding" type="const XML_Char *"/>
+ <arg name="memsuite" type="const XML_Memory_Handling_Suite *"/>
+ <arg name="namespaceSeparator" type="const XML_Char *"/>
+ </method>
+ <method name="XML_ExternalEntityParserCreate" result="XML_Parser">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="context" type="const XML_Char *"/>
+ <arg name="encoding" type="const XML_Char *"/>
+ </method>
+ <method name="XML_ParserFree" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_Parse" result="enum XML_Status">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="s" type="const char *"/>
+ <arg name="len" type="int"/>
+ <arg name="isFinal" type="int"/>
+ </method>
+ <method name="XML_ParseBuffer" result="enum XML_Status">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="len" type="int"/>
+ <arg name="isFinal" type="int"/>
+ </method>
+ <method name="XML_GetBuffer" result="void *">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="len" type="int"/>
+ </method>
+ <method name="XML_SetStartElementHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="start" type="XML_StartElementHandler"/>
+ </method>
+ <method name="XML_SetEndElementHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="end" type="XML_EndElementHandler"/>
+ </method>
+ <method name="XML_SetElementHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="start" type="XML_StartElementHandler"/>
+ <arg name="end" type="XML_EndElementHandler"/>
+ </method>
+ <method name="XML_SetCharacterDataHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_CharacterDataHandler"/>
+ </method>
+ <method name="XML_SetProcessingInstructionHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_ProcessingInstructionHandler"/>
+ </method>
+ <method name="XML_SetCommentHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_CommentHandler"/>
+ </method>
+ <method name="XML_SetStartCdataSectionHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="start" type="XML_StartCdataSectionHandler"/>
+ </method>
+ <method name="XML_SetEndCdataSectionHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="end" type="XML_EndCdataSectionHandler"/>
+ </method>
+ <method name="XML_SetCdataSectionHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="start" type="XML_StartCdataSectionHandler"/>
+ <arg name="end" type="XML_EndCdataSectionHandler"/>
+ </method>
+ <method name="XML_SetDefaultHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_DefaultHandler"/>
+ </method>
+ <method name="XML_SetDefaultHandlerExpand" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_DefaultHandler"/>
+ </method>
+ <method name="XML_SetExternalEntityRefHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_ExternalEntityRefHandler"/>
+ </method>
+ <method name="XML_SetExternalEntityRefHandlerArg" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="arg" type="void *"/>
+ </method>
+ <method name="XML_SetUnknownEncodingHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_UnknownEncodingHandler"/>
+ <arg name="data" type="void *"/>
+ </method>
+ <method name="XML_SetStartNamespaceDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="start" type="XML_StartNamespaceDeclHandler"/>
+ </method>
+ <method name="XML_SetEndNamespaceDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="end" type="XML_EndNamespaceDeclHandler"/>
+ </method>
+ <method name="XML_SetNamespaceDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="start" type="XML_StartNamespaceDeclHandler"/>
+ <arg name="end" type="XML_EndNamespaceDeclHandler"/>
+ </method>
+ <method name="XML_SetXmlDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_XmlDeclHandler"/>
+ </method>
+ <method name="XML_SetStartDoctypeDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="start" type="XML_StartDoctypeDeclHandler"/>
+ </method>
+ <method name="XML_SetEndDoctypeDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="end" type="XML_EndDoctypeDeclHandler"/>
+ </method>
+ <method name="XML_SetDoctypeDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="start" type="XML_StartDoctypeDeclHandler"/>
+ <arg name="end" type="XML_EndDoctypeDeclHandler"/>
+ </method>
+ <method name="XML_SetElementDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="eldecl" type="XML_ElementDeclHandler"/>
+ </method>
+ <method name="XML_SetAttlistDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="attdecl" type="XML_AttlistDeclHandler"/>
+ </method>
+ <method name="XML_SetEntityDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_EntityDeclHandler"/>
+ </method>
+ <method name="XML_SetUnparsedEntityDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_UnparsedEntityDeclHandler"/>
+ </method>
+ <method name="XML_SetNotationDeclHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_NotationDeclHandler"/>
+ </method>
+ <method name="XML_SetNotStandaloneHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_NotStandaloneHandler"/>
+ </method>
+ <method name="XML_GetErrorCode" result="enum XML_Error">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_ErrorString" result="const XML_LChar *">
+ <arg name="code" type="enum XML_Error"/>
+ </method>
+ <method name="XML_GetCurrentByteIndex" result="long">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_GetCurrentLineNumber" result="int">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_GetCurrentColumnNumber" result="int">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_GetCurrentByteCount" result="int">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_GetInputContext" result="const char *">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="offset" type="int *"/>
+ <arg name="size" type="int *"/>
+ </method>
+ <method name="XML_SetUserData" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="userData" type="void *"/>
+ </method>
+ <method name="XML_DefaultCurrent" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_UseParserAsHandlerArg" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_SetBase" result="enum XML_Status">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="base" type="const XML_Char *"/>
+ </method>
+ <method name="XML_GetBase" result="const XML_Char *">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_GetSpecifiedAttributeCount" result="int">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_GetIdAttributeIndex" result="int">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_SetEncoding" result="enum XML_Status">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="encoding" type="const XML_Char *"/>
+ </method>
+ <method name="XML_SetParamEntityParsing" result="int">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="parsing" type="enum XML_ParamEntityParsing"/>
+ </method>
+ <method name="XML_SetReturnNSTriplet" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="do_nst" type="int"/>
+ </method>
+ <method name="XML_ExpatVersion" result="const XML_LChar *">
+ </method>
+ <method name="XML_ExpatVersionInfo" result="XML_Expat_Version">
+ </method>
+ <method name="XML_ParserReset" result="XML_Bool">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="encoding" type="const XML_Char *"/>
+ </method>
+ <method name="XML_SetSkippedEntityHandler" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="handler" type="XML_SkippedEntityHandler"/>
+ </method>
+ <method name="XML_UseForeignDTD" result="enum XML_Error">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="useDTD" type="XML_Bool"/>
+ </method>
+ <method name="XML_GetFeatureList" result="const XML_Feature *">
+ </method>
+ <method name="XML_StopParser" result="enum XML_Status">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="resumable" type="XML_Bool"/>
+ </method>
+ <method name="XML_ResumeParser" result="enum XML_Status">
+ <arg name="parser" type="XML_Parser"/>
+ </method>
+ <method name="XML_GetParsingStatus" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="status" type="XML_ParsingStatus *"/>
+ </method>
+ <method name="XML_FreeContentModel" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="model" type="XML_Content *"/>
+ </method>
+ <method name="XML_MemMalloc" result="void *">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="size" type="size_t"/>
+ </method>
+ <method name="XML_MemRealloc" result="void *">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="ptr" type="void *"/>
+ <arg name="size" type="size_t"/>
+ </method>
+ <method name="XML_MemFree" result="void">
+ <arg name="parser" type="XML_Parser"/>
+ <arg name="ptr" type="void *"/>
+ </method>
+ </interface>
+</library>
diff --git a/expat-2.0.1/amiga/expat_lib.c b/expat-2.0.1/amiga/expat_lib.c
new file mode 100755
index 0000000..039c48d
--- /dev/null
+++ b/expat-2.0.1/amiga/expat_lib.c
@@ -0,0 +1,233 @@
+/*
+** Copyright (c) 2001-2007 Expat maintainers.
+**
+** Permission is hereby granted, free of charge, to any person obtaining
+** a copy of this software and associated documentation files (the
+** "Software"), to deal in the Software without restriction, including
+** without limitation the rights to use, copy, modify, merge, publish,
+** distribute, sublicense, and/or sell copies of the Software, and to
+** permit persons to whom the Software is furnished to do so, subject to
+** the following conditions:
+**
+** The above copyright notice and this permission notice shall be included
+** in all copies or substantial portions of the Software.
+**
+** THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+** SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include <dos/dos.h>
+#include <proto/exec.h>
+
+#define LIBNAME "expat.library"
+#define LIBPRI 0
+#define VERSION 4
+#define REVISION 2
+#define VSTRING "expat.library 4.2 (2.6.2007)" /* dd.mm.yyyy */
+
+
+static const char* __attribute__((used)) verstag = "\0$VER: " VSTRING;
+
+
+struct ExpatBase {
+ struct Library libNode;
+ uint16 pad;
+ BPTR SegList;
+};
+
+
+struct ExpatBase * libInit(struct ExpatBase *libBase, BPTR seglist, struct ExecIFace *ISys);
+uint32 libObtain (struct LibraryManagerInterface *Self);
+uint32 libRelease (struct LibraryManagerInterface *Self);
+struct ExpatBase *libOpen (struct LibraryManagerInterface *Self, uint32 version);
+BPTR libClose (struct LibraryManagerInterface *Self);
+BPTR libExpunge (struct LibraryManagerInterface *Self);
+
+
+static APTR lib_manager_vectors[] = {
+ libObtain,
+ libRelease,
+ NULL,
+ NULL,
+ libOpen,
+ libClose,
+ libExpunge,
+ NULL,
+ (APTR)-1,
+};
+
+
+static struct TagItem lib_managerTags[] = {
+ { MIT_Name, (uint32)"__library" },
+ { MIT_VectorTable, (uint32)lib_manager_vectors },
+ { MIT_Version, 1 },
+ { TAG_END, 0 }
+};
+
+
+extern void *main_vectors[];
+
+static struct TagItem lib_mainTags[] = {
+ { MIT_Name, (uint32)"main" },
+ { MIT_VectorTable, (uint32)main_vectors },
+ { MIT_Version, 1 },
+ { TAG_END, 0 }
+};
+
+
+static APTR libInterfaces[] = {
+ lib_managerTags,
+ lib_mainTags,
+ NULL
+};
+
+
+static struct TagItem libCreateTags[] = {
+ { CLT_DataSize, sizeof(struct ExpatBase) },
+ { CLT_InitFunc, (uint32)libInit },
+ { CLT_Interfaces, (uint32)libInterfaces },
+ { TAG_END, 0 }
+};
+
+
+static struct Resident __attribute__((used)) lib_res = {
+ RTC_MATCHWORD, // rt_MatchWord
+ &lib_res, // rt_MatchTag
+ &lib_res+1, // rt_EndSkip
+ RTF_NATIVE | RTF_AUTOINIT, // rt_Flags
+ VERSION, // rt_Version
+ NT_LIBRARY, // rt_Type
+ LIBPRI, // rt_Pri
+ LIBNAME, // rt_Name
+ VSTRING, // rt_IdString
+ libCreateTags // rt_Init
+};
+
+
+struct Library *DOSLib = 0;
+struct Library *UtilityBase = 0;
+
+struct ExecIFace *IExec = 0;
+struct DOSIFace *IDOS = 0;
+struct UtilityIFace *IUtility = 0;
+
+
+void _start()
+{
+}
+
+
+struct ExpatBase *libInit(struct ExpatBase *libBase, BPTR seglist, struct ExecIFace *ISys)
+{
+ libBase->libNode.lib_Node.ln_Type = NT_LIBRARY;
+ libBase->libNode.lib_Node.ln_Pri = LIBPRI;
+ libBase->libNode.lib_Node.ln_Name = LIBNAME;
+ libBase->libNode.lib_Flags = LIBF_SUMUSED|LIBF_CHANGED;
+ libBase->libNode.lib_Version = VERSION;
+ libBase->libNode.lib_Revision = REVISION;
+ libBase->libNode.lib_IdString = VSTRING;
+ libBase->SegList = seglist;
+
+ IExec = ISys;
+
+ DOSLib = OpenLibrary("dos.library", 51);
+ if ( DOSLib != 0 ) {
+ IDOS = (struct DOSIFace *)GetInterface(DOSLib, "main", 1, NULL);
+ if ( IDOS != 0 ) {
+ UtilityBase = OpenLibrary("utility.library", 51);
+ if ( UtilityBase != 0 ) {
+ IUtility = (struct UtilityIFace*)GetInterface(UtilityBase, "main", 1, NULL);
+ if ( IUtility != 0 ) {
+ return libBase;
+ }
+
+ CloseLibrary(UtilityBase);
+ }
+
+ DropInterface((struct Interface *)IDOS);
+ }
+
+ CloseLibrary(DOSLib);
+ }
+
+ return NULL;
+}
+
+
+uint32 libObtain( struct LibraryManagerInterface *Self )
+{
+ ++Self->Data.RefCount;
+ return Self->Data.RefCount;
+}
+
+
+uint32 libRelease( struct LibraryManagerInterface *Self )
+{
+ --Self->Data.RefCount;
+ return Self->Data.RefCount;
+}
+
+
+struct ExpatBase *libOpen( struct LibraryManagerInterface *Self, uint32 version )
+{
+ struct ExpatBase *libBase;
+
+ libBase = (struct ExpatBase *)Self->Data.LibBase;
+
+ ++libBase->libNode.lib_OpenCnt;
+ libBase->libNode.lib_Flags &= ~LIBF_DELEXP;
+
+ return libBase;
+}
+
+
+BPTR libClose( struct LibraryManagerInterface *Self )
+{
+ struct ExpatBase *libBase;
+
+ libBase = (struct ExpatBase *)Self->Data.LibBase;
+
+ --libBase->libNode.lib_OpenCnt;
+ if ( libBase->libNode.lib_OpenCnt ) {
+ return 0;
+ }
+
+ if ( libBase->libNode.lib_Flags & LIBF_DELEXP ) {
+ return (BPTR)Self->LibExpunge();
+ }
+ else {
+ return 0;
+ }
+}
+
+
+BPTR libExpunge( struct LibraryManagerInterface *Self )
+{
+ struct ExpatBase *libBase;
+ BPTR result = 0;
+
+ libBase = (struct ExpatBase *)Self->Data.LibBase;
+
+ if (libBase->libNode.lib_OpenCnt == 0) {
+ Remove(&libBase->libNode.lib_Node);
+
+ result = libBase->SegList;
+
+ DropInterface((struct Interface *)IUtility);
+ CloseLibrary(UtilityBase);
+ DropInterface((struct Interface *)IDOS);
+ CloseLibrary(DOSLib);
+
+ DeleteLibrary(&libBase->libNode);
+ }
+ else {
+ libBase->libNode.lib_Flags |= LIBF_DELEXP;
+ }
+
+ return result;
+}
diff --git a/expat-2.0.1/amiga/expat_vectors.c b/expat-2.0.1/amiga/expat_vectors.c
new file mode 100755
index 0000000..14fb3be
--- /dev/null
+++ b/expat-2.0.1/amiga/expat_vectors.c
@@ -0,0 +1,505 @@
+/*
+** Copyright (c) 2001-2007 Expat maintainers.
+**
+** Permission is hereby granted, free of charge, to any person obtaining
+** a copy of this software and associated documentation files (the
+** "Software"), to deal in the Software without restriction, including
+** without limitation the rights to use, copy, modify, merge, publish,
+** distribute, sublicense, and/or sell copies of the Software, and to
+** permit persons to whom the Software is furnished to do so, subject to
+** the following conditions:
+**
+** The above copyright notice and this permission notice shall be included
+** in all copies or substantial portions of the Software.
+**
+** THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+** SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include <exec/types.h>
+#include <exec/exec.h>
+#include <exec/interfaces.h>
+#include <interfaces/expat.h>
+
+extern uint32 _Expat_Obtain(struct ExpatIFace *);
+extern uint32 _Expat_Release(struct ExpatIFace *);
+extern XML_Parser _Expat_XML_ParserCreate(struct ExpatIFace *, const XML_Char * encodingName);
+extern XML_Parser _Expat_XML_ParserCreateNS(struct ExpatIFace *, const XML_Char * encodingName, XML_Char nsSep);
+extern XML_Parser _Expat_XML_ParserCreate_MM(struct ExpatIFace *, const XML_Char * encoding, const XML_Memory_Handling_Suite * memsuite, const XML_Char * namespaceSeparator);
+extern XML_Parser _Expat_XML_ExternalEntityParserCreate(struct ExpatIFace *, XML_Parser parser, const XML_Char * context, const XML_Char * encoding);
+extern void _Expat_XML_ParserFree(struct ExpatIFace *, XML_Parser parser);
+extern enum XML_Status _Expat_XML_Parse(struct ExpatIFace *, XML_Parser parser, const char * s, int len, int isFinal);
+extern enum XML_Status _Expat_XML_ParseBuffer(struct ExpatIFace *, XML_Parser parser, int len, int isFinal);
+extern void * _Expat_XML_GetBuffer(struct ExpatIFace *, XML_Parser parser, int len);
+extern void _Expat_XML_SetStartElementHandler(struct ExpatIFace *, XML_Parser parser, XML_StartElementHandler start);
+extern void _Expat_XML_SetEndElementHandler(struct ExpatIFace *, XML_Parser parser, XML_EndElementHandler end);
+extern void _Expat_XML_SetElementHandler(struct ExpatIFace *, XML_Parser parser, XML_StartElementHandler start, XML_EndElementHandler end);
+extern void _Expat_XML_SetCharacterDataHandler(struct ExpatIFace *, XML_Parser parser, XML_CharacterDataHandler handler);
+extern void _Expat_XML_SetProcessingInstructionHandler(struct ExpatIFace *, XML_Parser parser, XML_ProcessingInstructionHandler handler);
+extern void _Expat_XML_SetCommentHandler(struct ExpatIFace *, XML_Parser parser, XML_CommentHandler handler);
+extern void _Expat_XML_SetStartCdataSectionHandler(struct ExpatIFace *, XML_Parser parser, XML_StartCdataSectionHandler start);
+extern void _Expat_XML_SetEndCdataSectionHandler(struct ExpatIFace *, XML_Parser parser, XML_EndCdataSectionHandler end);
+extern void _Expat_XML_SetCdataSectionHandler(struct ExpatIFace *, XML_Parser parser, XML_StartCdataSectionHandler start, XML_EndCdataSectionHandler end);
+extern void _Expat_XML_SetDefaultHandler(struct ExpatIFace *, XML_Parser parser, XML_DefaultHandler handler);
+extern void _Expat_XML_SetDefaultHandlerExpand(struct ExpatIFace *, XML_Parser parser, XML_DefaultHandler handler);
+extern void _Expat_XML_SetExternalEntityRefHandler(struct ExpatIFace *, XML_Parser parser, XML_ExternalEntityRefHandler handler);
+extern void _Expat_XML_SetExternalEntityRefHandlerArg(struct ExpatIFace *, XML_Parser parser, void * arg);
+extern void _Expat_XML_SetUnknownEncodingHandler(struct ExpatIFace *, XML_Parser parser, XML_UnknownEncodingHandler handler, void * data);
+extern void _Expat_XML_SetStartNamespaceDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_StartNamespaceDeclHandler start);
+extern void _Expat_XML_SetEndNamespaceDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_EndNamespaceDeclHandler end);
+extern void _Expat_XML_SetNamespaceDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_StartNamespaceDeclHandler start, XML_EndNamespaceDeclHandler end);
+extern void _Expat_XML_SetXmlDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_XmlDeclHandler handler);
+extern void _Expat_XML_SetStartDoctypeDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_StartDoctypeDeclHandler start);
+extern void _Expat_XML_SetEndDoctypeDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_EndDoctypeDeclHandler end);
+extern void _Expat_XML_SetDoctypeDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_StartDoctypeDeclHandler start, XML_EndDoctypeDeclHandler end);
+extern void _Expat_XML_SetElementDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_ElementDeclHandler eldecl);
+extern void _Expat_XML_SetAttlistDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_AttlistDeclHandler attdecl);
+extern void _Expat_XML_SetEntityDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_EntityDeclHandler handler);
+extern void _Expat_XML_SetUnparsedEntityDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_UnparsedEntityDeclHandler handler);
+extern void _Expat_XML_SetNotationDeclHandler(struct ExpatIFace *, XML_Parser parser, XML_NotationDeclHandler handler);
+extern void _Expat_XML_SetNotStandaloneHandler(struct ExpatIFace *, XML_Parser parser, XML_NotStandaloneHandler handler);
+extern enum XML_Error _Expat_XML_GetErrorCode(struct ExpatIFace *, XML_Parser parser);
+extern const XML_LChar * _Expat_XML_ErrorString(struct ExpatIFace *, enum XML_Error code);
+extern long _Expat_XML_GetCurrentByteIndex(struct ExpatIFace *, XML_Parser parser);
+extern int _Expat_XML_GetCurrentLineNumber(struct ExpatIFace *, XML_Parser parser);
+extern int _Expat_XML_GetCurrentColumnNumber(struct ExpatIFace *, XML_Parser parser);
+extern int _Expat_XML_GetCurrentByteCount(struct ExpatIFace *, XML_Parser parser);
+extern const char * _Expat_XML_GetInputContext(struct ExpatIFace *, XML_Parser parser, int * offset, int * size);
+extern void _Expat_XML_SetUserData(struct ExpatIFace *, XML_Parser parser, void * userData);
+extern void _Expat_XML_DefaultCurrent(struct ExpatIFace *, XML_Parser parser);
+extern void _Expat_XML_UseParserAsHandlerArg(struct ExpatIFace *, XML_Parser parser);
+extern enum XML_Status _Expat_XML_SetBase(struct ExpatIFace *, XML_Parser parser, const XML_Char * base);
+extern const XML_Char * _Expat_XML_GetBase(struct ExpatIFace *, XML_Parser parser);
+extern int _Expat_XML_GetSpecifiedAttributeCount(struct ExpatIFace *, XML_Parser parser);
+extern int _Expat_XML_GetIdAttributeIndex(struct ExpatIFace *, XML_Parser parser);
+extern enum XML_Status _Expat_XML_SetEncoding(struct ExpatIFace *, XML_Parser parser, const XML_Char * encoding);
+extern int _Expat_XML_SetParamEntityParsing(struct ExpatIFace *, XML_Parser parser, enum XML_ParamEntityParsing parsing);
+extern void _Expat_XML_SetReturnNSTriplet(struct ExpatIFace *, XML_Parser parser, int do_nst);
+extern const XML_LChar * _Expat_XML_ExpatVersion(struct ExpatIFace *);
+extern XML_Expat_Version _Expat_XML_ExpatVersionInfo(struct ExpatIFace *);
+extern XML_Bool _Expat_XML_ParserReset(struct ExpatIFace *, XML_Parser parser, const XML_Char * encoding);
+extern void _Expat_XML_SetSkippedEntityHandler(struct ExpatIFace *, XML_Parser parser, XML_SkippedEntityHandler handler);
+extern enum XML_Error _Expat_XML_UseForeignDTD(struct ExpatIFace *, XML_Parser parser, XML_Bool useDTD);
+extern const XML_Feature * _Expat_XML_GetFeatureList(struct ExpatIFace *);
+extern enum XML_Status _Expat_XML_StopParser(struct ExpatIFace *, XML_Parser parser, XML_Bool resumable);
+extern enum XML_Status _Expat_XML_ResumeParser(struct ExpatIFace *, XML_Parser parser);
+extern void _Expat_XML_GetParsingStatus(struct ExpatIFace *, XML_Parser parser, XML_ParsingStatus * status);
+extern void _Expat_XML_FreeContentModel(struct ExpatIFace *, XML_Parser parser, XML_Content * model);
+extern void * _Expat_XML_MemMalloc(struct ExpatIFace *, XML_Parser parser, size_t size);
+extern void * _Expat_XML_MemRealloc(struct ExpatIFace *, XML_Parser parser, void * ptr, size_t size);
+extern void _Expat_XML_MemFree(struct ExpatIFace *, XML_Parser parser, void * ptr);
+
+
+CONST APTR main_vectors[] =
+{
+ _Expat_Obtain,
+ _Expat_Release,
+ NULL,
+ NULL,
+ _Expat_XML_ParserCreate,
+ _Expat_XML_ParserCreateNS,
+ _Expat_XML_ParserCreate_MM,
+ _Expat_XML_ExternalEntityParserCreate,
+ _Expat_XML_ParserFree,
+ _Expat_XML_Parse,
+ _Expat_XML_ParseBuffer,
+ _Expat_XML_GetBuffer,
+ _Expat_XML_SetStartElementHandler,
+ _Expat_XML_SetEndElementHandler,
+ _Expat_XML_SetElementHandler,
+ _Expat_XML_SetCharacterDataHandler,
+ _Expat_XML_SetProcessingInstructionHandler,
+ _Expat_XML_SetCommentHandler,
+ _Expat_XML_SetStartCdataSectionHandler,
+ _Expat_XML_SetEndCdataSectionHandler,
+ _Expat_XML_SetCdataSectionHandler,
+ _Expat_XML_SetDefaultHandler,
+ _Expat_XML_SetDefaultHandlerExpand,
+ _Expat_XML_SetExternalEntityRefHandler,
+ _Expat_XML_SetExternalEntityRefHandlerArg,
+ _Expat_XML_SetUnknownEncodingHandler,
+ _Expat_XML_SetStartNamespaceDeclHandler,
+ _Expat_XML_SetEndNamespaceDeclHandler,
+ _Expat_XML_SetNamespaceDeclHandler,
+ _Expat_XML_SetXmlDeclHandler,
+ _Expat_XML_SetStartDoctypeDeclHandler,
+ _Expat_XML_SetEndDoctypeDeclHandler,
+ _Expat_XML_SetDoctypeDeclHandler,
+ _Expat_XML_SetElementDeclHandler,
+ _Expat_XML_SetAttlistDeclHandler,
+ _Expat_XML_SetEntityDeclHandler,
+ _Expat_XML_SetUnparsedEntityDeclHandler,
+ _Expat_XML_SetNotationDeclHandler,
+ _Expat_XML_SetNotStandaloneHandler,
+ _Expat_XML_GetErrorCode,
+ _Expat_XML_ErrorString,
+ _Expat_XML_GetCurrentByteIndex,
+ _Expat_XML_GetCurrentLineNumber,
+ _Expat_XML_GetCurrentColumnNumber,
+ _Expat_XML_GetCurrentByteCount,
+ _Expat_XML_GetInputContext,
+ _Expat_XML_SetUserData,
+ _Expat_XML_DefaultCurrent,
+ _Expat_XML_UseParserAsHandlerArg,
+ _Expat_XML_SetBase,
+ _Expat_XML_GetBase,
+ _Expat_XML_GetSpecifiedAttributeCount,
+ _Expat_XML_GetIdAttributeIndex,
+ _Expat_XML_SetEncoding,
+ _Expat_XML_SetParamEntityParsing,
+ _Expat_XML_SetReturnNSTriplet,
+ _Expat_XML_ExpatVersion,
+ _Expat_XML_ExpatVersionInfo,
+ _Expat_XML_ParserReset,
+ _Expat_XML_SetSkippedEntityHandler,
+ _Expat_XML_UseForeignDTD,
+ _Expat_XML_GetFeatureList,
+ _Expat_XML_StopParser,
+ _Expat_XML_ResumeParser,
+ _Expat_XML_GetParsingStatus,
+ _Expat_XML_FreeContentModel,
+ _Expat_XML_MemMalloc,
+ _Expat_XML_MemRealloc,
+ _Expat_XML_MemFree,
+ (APTR)-1
+};
+
+uint32 _Expat_Obtain(struct ExpatIFace *Self)
+{
+ return ++Self->Data.RefCount;
+}
+
+uint32 _Expat_Release(struct ExpatIFace *Self)
+{
+ return --Self->Data.RefCount;
+}
+
+XML_Parser _Expat_XML_ParserCreate(struct ExpatIFace * Self, const XML_Char *encoding)
+{
+ return XML_ParserCreate(encoding);
+}
+
+XML_Parser _Expat_XML_ParserCreateNS(struct ExpatIFace * Self, const XML_Char *encoding, XML_Char nsSep)
+{
+ return XML_ParserCreateNS(encoding, nsSep);
+}
+
+XML_Parser _Expat_XML_ParserCreate_MM(struct ExpatIFace * Self, const XML_Char *encoding, const XML_Memory_Handling_Suite *memsuite, const XML_Char *namespaceSeparator)
+{
+ return XML_ParserCreate_MM(encoding, memsuite, namespaceSeparator);
+}
+
+XML_Parser _Expat_XML_ExternalEntityParserCreate(struct ExpatIFace * Self, XML_Parser parser, const XML_Char *context, const XML_Char *encoding)
+{
+ return XML_ExternalEntityParserCreate(parser, context, encoding);
+}
+
+void _Expat_XML_ParserFree(struct ExpatIFace *Self, XML_Parser parser)
+{
+ XML_ParserFree(parser);
+}
+
+enum XML_Status _Expat_XML_Parse(struct ExpatIFace * Self, XML_Parser parser, const char * s, int len, int isFinal)
+{
+ return XML_Parse(parser, s, len, isFinal);
+}
+
+enum XML_Status _Expat_XML_ParseBuffer(struct ExpatIFace * Self, XML_Parser parser, int len, int isFinal)
+{
+ return XML_ParseBuffer(parser, len, isFinal);
+}
+
+void * _Expat_XML_GetBuffer(struct ExpatIFace * Self, XML_Parser parser, int len)
+{
+ return XML_GetBuffer(parser, len);
+}
+
+void _Expat_XML_SetStartElementHandler(struct ExpatIFace * Self, XML_Parser parser, XML_StartElementHandler start)
+{
+ XML_SetStartElementHandler(parser, start);
+}
+
+void _Expat_XML_SetEndElementHandler(struct ExpatIFace * Self, XML_Parser parser, XML_EndElementHandler end)
+{
+ XML_SetEndElementHandler(parser, end);
+}
+
+void _Expat_XML_SetElementHandler(struct ExpatIFace * Self, XML_Parser parser, XML_StartElementHandler start, XML_EndElementHandler end)
+{
+ XML_SetElementHandler(parser, start, end);
+}
+
+void _Expat_XML_SetCharacterDataHandler(struct ExpatIFace * Self, XML_Parser parser, XML_CharacterDataHandler handler)
+{
+ XML_SetCharacterDataHandler(parser, handler);
+}
+
+void _Expat_XML_SetProcessingInstructionHandler(struct ExpatIFace * Self, XML_Parser parser, XML_ProcessingInstructionHandler handler)
+{
+ XML_SetProcessingInstructionHandler(parser, handler);
+}
+
+void _Expat_XML_SetCommentHandler(struct ExpatIFace * Self, XML_Parser parser, XML_CommentHandler handler)
+{
+ XML_SetCommentHandler(parser, handler);
+}
+
+void _Expat_XML_SetStartCdataSectionHandler(struct ExpatIFace * Self, XML_Parser parser, XML_StartCdataSectionHandler start)
+{
+ XML_SetStartCdataSectionHandler(parser, start);
+}
+
+void _Expat_XML_SetEndCdataSectionHandler(struct ExpatIFace * Self, XML_Parser parser, XML_EndCdataSectionHandler end)
+{
+ XML_SetEndCdataSectionHandler(parser, end);
+}
+
+void _Expat_XML_SetCdataSectionHandler(struct ExpatIFace * Self, XML_Parser parser, XML_StartCdataSectionHandler start, XML_EndCdataSectionHandler end)
+{
+ XML_SetCdataSectionHandler(parser, start, end);
+}
+
+void _Expat_XML_SetDefaultHandler(struct ExpatIFace * Self, XML_Parser parser, XML_DefaultHandler handler)
+{
+ XML_SetDefaultHandler(parser, handler);
+}
+
+void _Expat_XML_SetDefaultHandlerExpand(struct ExpatIFace * Self, XML_Parser parser, XML_DefaultHandler handler)
+{
+ XML_SetDefaultHandlerExpand(parser, handler);
+}
+
+void _Expat_XML_SetExternalEntityRefHandler(struct ExpatIFace * Self, XML_Parser parser, XML_ExternalEntityRefHandler handler)
+{
+ XML_SetExternalEntityRefHandler(parser, handler);
+}
+
+void _Expat_XML_SetExternalEntityRefHandlerArg(struct ExpatIFace * Self, XML_Parser parser, void * arg)
+{
+ XML_SetExternalEntityRefHandlerArg(parser, arg);
+}
+
+void _Expat_XML_SetUnknownEncodingHandler(struct ExpatIFace * Self, XML_Parser parser, XML_UnknownEncodingHandler handler, void * data)
+{
+ XML_SetUnknownEncodingHandler(parser, handler, data);
+}
+
+void _Expat_XML_SetStartNamespaceDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_StartNamespaceDeclHandler start)
+{
+ XML_SetStartNamespaceDeclHandler(parser, start);
+}
+
+void _Expat_XML_SetEndNamespaceDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_EndNamespaceDeclHandler end)
+{
+ XML_SetEndNamespaceDeclHandler(parser, end);
+}
+
+void _Expat_XML_SetNamespaceDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_StartNamespaceDeclHandler start, XML_EndNamespaceDeclHandler end)
+{
+ XML_SetNamespaceDeclHandler(parser, start, end);
+}
+
+void _Expat_XML_SetXmlDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_XmlDeclHandler handler)
+{
+ XML_SetXmlDeclHandler(parser, handler);
+}
+
+void _Expat_XML_SetStartDoctypeDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_StartDoctypeDeclHandler start)
+{
+ XML_SetStartDoctypeDeclHandler(parser, start);
+}
+
+void _Expat_XML_SetEndDoctypeDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_EndDoctypeDeclHandler end)
+{
+ XML_SetEndDoctypeDeclHandler(parser, end);
+}
+
+void _Expat_XML_SetDoctypeDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_StartDoctypeDeclHandler start, XML_EndDoctypeDeclHandler end)
+{
+ XML_SetDoctypeDeclHandler(parser, start, end);
+}
+
+void _Expat_XML_SetElementDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_ElementDeclHandler eldecl)
+{
+ XML_SetElementDeclHandler(parser, eldecl);
+}
+
+void _Expat_XML_SetAttlistDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_AttlistDeclHandler attdecl)
+{
+ XML_SetAttlistDeclHandler(parser, attdecl);
+}
+
+void _Expat_XML_SetEntityDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_EntityDeclHandler handler)
+{
+ XML_SetEntityDeclHandler(parser, handler);
+}
+
+void _Expat_XML_SetUnparsedEntityDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_UnparsedEntityDeclHandler handler)
+{
+ XML_SetUnparsedEntityDeclHandler(parser, handler);
+}
+
+void _Expat_XML_SetNotationDeclHandler(struct ExpatIFace * Self, XML_Parser parser, XML_NotationDeclHandler handler)
+{
+ XML_SetNotationDeclHandler(parser, handler);
+}
+
+void _Expat_XML_SetNotStandaloneHandler(struct ExpatIFace * Self, XML_Parser parser, XML_NotStandaloneHandler handler)
+{
+ XML_SetNotStandaloneHandler(parser, handler);
+}
+
+enum XML_Error _Expat_XML_GetErrorCode(struct ExpatIFace * Self, XML_Parser parser)
+{
+ return XML_GetErrorCode(parser);
+}
+
+const XML_LChar * _Expat_XML_ErrorString(struct ExpatIFace * Self, enum XML_Error code)
+{
+ return XML_ErrorString(code);
+}
+
+long _Expat_XML_GetCurrentByteIndex(struct ExpatIFace * Self, XML_Parser parser)
+{
+ return XML_GetCurrentByteIndex(parser);
+}
+
+int _Expat_XML_GetCurrentLineNumber(struct ExpatIFace * Self, XML_Parser parser)
+{
+ return XML_GetCurrentLineNumber(parser);
+}
+
+int _Expat_XML_GetCurrentColumnNumber(struct ExpatIFace * Self, XML_Parser parser)
+{
+ return XML_GetCurrentColumnNumber(parser);
+}
+
+int _Expat_XML_GetCurrentByteCount(struct ExpatIFace * Self, XML_Parser parser)
+{
+ return XML_GetCurrentByteCount(parser);
+}
+
+const char * _Expat_XML_GetInputContext(struct ExpatIFace * Self, XML_Parser parser, int * offset, int * size)
+{
+ return XML_GetInputContext(parser, offset, size);
+}
+
+void _Expat_XML_SetUserData(struct ExpatIFace * Self, XML_Parser parser, void * userData)
+{
+ XML_SetUserData(parser, userData);
+}
+
+void _Expat_XML_DefaultCurrent(struct ExpatIFace * Self, XML_Parser parser)
+{
+ XML_DefaultCurrent(parser);
+}
+
+void _Expat_XML_UseParserAsHandlerArg(struct ExpatIFace * Self, XML_Parser parser)
+{
+ XML_UseParserAsHandlerArg(parser);
+}
+
+enum XML_Status _Expat_XML_SetBase(struct ExpatIFace * Self, XML_Parser parser, const XML_Char *p)
+{
+ return XML_SetBase(parser, p);
+}
+
+const XML_Char * _Expat_XML_GetBase(struct ExpatIFace * Self, XML_Parser parser)
+{
+ return XML_GetBase(parser);
+}
+
+int _Expat_XML_GetSpecifiedAttributeCount(struct ExpatIFace * Self, XML_Parser parser)
+{
+ return XML_GetSpecifiedAttributeCount(parser);
+}
+
+int _Expat_XML_GetIdAttributeIndex(struct ExpatIFace * Self, XML_Parser parser)
+{
+ return XML_GetIdAttributeIndex(parser);
+}
+
+enum XML_Status _Expat_XML_SetEncoding(struct ExpatIFace * Self, XML_Parser parser, const XML_Char *encoding)
+{
+ return XML_SetEncoding(parser, encoding);
+}
+
+int _Expat_XML_SetParamEntityParsing(struct ExpatIFace * Self, XML_Parser parser, enum XML_ParamEntityParsing parsing)
+{
+ return XML_SetParamEntityParsing(parser, parsing);
+}
+
+void _Expat_XML_SetReturnNSTriplet(struct ExpatIFace * Self, XML_Parser parser, int do_nst)
+{
+ XML_SetReturnNSTriplet(parser, do_nst);
+}
+
+const XML_LChar * _Expat_XML_ExpatVersion(struct ExpatIFace * Self)
+{
+ return XML_ExpatVersion();
+}
+
+XML_Expat_Version _Expat_XML_ExpatVersionInfo(struct ExpatIFace * Self)
+{
+ return XML_ExpatVersionInfo();
+}
+
+XML_Bool _Expat_XML_ParserReset(struct ExpatIFace * Self, XML_Parser parser, const XML_Char *encoding)
+{
+ return XML_ParserReset(parser, encoding);
+}
+
+void _Expat_XML_SetSkippedEntityHandler(struct ExpatIFace * Self, XML_Parser parser, XML_SkippedEntityHandler handler)
+{
+ XML_SetSkippedEntityHandler(parser, handler);
+}
+
+enum XML_Error _Expat_XML_UseForeignDTD(struct ExpatIFace * Self, XML_Parser parser, XML_Bool useDTD)
+{
+ return XML_UseForeignDTD(parser, useDTD);
+}
+
+const XML_Feature * _Expat_XML_GetFeatureList(struct ExpatIFace * Self)
+{
+ return XML_GetFeatureList();
+}
+
+enum XML_Status _Expat_XML_StopParser(struct ExpatIFace * Self, XML_Parser parser, XML_Bool resumable)
+{
+ return XML_StopParser(parser, resumable);
+}
+
+enum XML_Status _Expat_XML_ResumeParser(struct ExpatIFace * Self, XML_Parser parser)
+{
+ return XML_ResumeParser(parser);
+}
+
+void _Expat_XML_GetParsingStatus(struct ExpatIFace * Self, XML_Parser parser, XML_ParsingStatus * status)
+{
+ XML_GetParsingStatus(parser, status);
+}
+
+void _Expat_XML_FreeContentModel(struct ExpatIFace * Self, XML_Parser parser, XML_Content * model)
+{
+ XML_FreeContentModel(parser, model);
+}
+
+void * _Expat_XML_MemMalloc(struct ExpatIFace * Self, XML_Parser parser, size_t size)
+{
+ return XML_MemMalloc(parser, size);
+}
+
+void * _Expat_XML_MemRealloc(struct ExpatIFace * Self, XML_Parser parser, void * ptr, size_t size)
+{
+ XML_MemRealloc(parser, ptr, size);
+}
+
+void _Expat_XML_MemFree(struct ExpatIFace * Self, XML_Parser parser, void * ptr)
+{
+ XML_MemFree(parser, ptr);
+}
diff --git a/expat-2.0.1/amiga/include/inline4/expat.h b/expat-2.0.1/amiga/include/inline4/expat.h
new file mode 100755
index 0000000..1e3105d
--- /dev/null
+++ b/expat-2.0.1/amiga/include/inline4/expat.h
@@ -0,0 +1,94 @@
+#ifndef INLINE4_EXPAT_H
+#define INLINE4_EXPAT_H
+
+/*
+** This file was auto generated by idltool 51.6.
+**
+** It provides compatibility to OS3 style library
+** calls by substituting functions.
+**
+** Do not edit manually.
+*/
+
+#ifndef EXEC_TYPES_H
+#include <exec/types.h>
+#endif
+#ifndef EXEC_EXEC_H
+#include <exec/exec.h>
+#endif
+#ifndef EXEC_INTERFACES_H
+#include <exec/interfaces.h>
+#endif
+
+#ifndef LIBRARIES_EXPAT_H
+#include <libraries/expat.h>
+#endif
+
+/* Inline macros for Interface "main" */
+#define XML_ParserCreate(encodingName) IExpat->XML_ParserCreate(encodingName)
+#define XML_ParserCreateNS(encodingName, nsSep) IExpat->XML_ParserCreateNS(encodingName, nsSep)
+#define XML_ParserCreate_MM(encoding, memsuite, namespaceSeparator) IExpat->XML_ParserCreate_MM(encoding, memsuite, namespaceSeparator)
+#define XML_ExternalEntityParserCreate(parser, context, encoding) IExpat->XML_ExternalEntityParserCreate(parser, context, encoding)
+#define XML_ParserFree(parser) IExpat->XML_ParserFree(parser)
+#define XML_Parse(parser, s, len, isFinal) IExpat->XML_Parse(parser, s, len, isFinal)
+#define XML_ParseBuffer(parser, len, isFinal) IExpat->XML_ParseBuffer(parser, len, isFinal)
+#define XML_GetBuffer(parser, len) IExpat->XML_GetBuffer(parser, len)
+#define XML_SetStartElementHandler(parser, start) IExpat->XML_SetStartElementHandler(parser, start)
+#define XML_SetEndElementHandler(parser, end) IExpat->XML_SetEndElementHandler(parser, end)
+#define XML_SetElementHandler(parser, start, end) IExpat->XML_SetElementHandler(parser, start, end)
+#define XML_SetCharacterDataHandler(parser, handler) IExpat->XML_SetCharacterDataHandler(parser, handler)
+#define XML_SetProcessingInstructionHandler(parser, handler) IExpat->XML_SetProcessingInstructionHandler(parser, handler)
+#define XML_SetCommentHandler(parser, handler) IExpat->XML_SetCommentHandler(parser, handler)
+#define XML_SetStartCdataSectionHandler(parser, start) IExpat->XML_SetStartCdataSectionHandler(parser, start)
+#define XML_SetEndCdataSectionHandler(parser, end) IExpat->XML_SetEndCdataSectionHandler(parser, end)
+#define XML_SetCdataSectionHandler(parser, start, end) IExpat->XML_SetCdataSectionHandler(parser, start, end)
+#define XML_SetDefaultHandler(parser, handler) IExpat->XML_SetDefaultHandler(parser, handler)
+#define XML_SetDefaultHandlerExpand(parser, handler) IExpat->XML_SetDefaultHandlerExpand(parser, handler)
+#define XML_SetExternalEntityRefHandler(parser, handler) IExpat->XML_SetExternalEntityRefHandler(parser, handler)
+#define XML_SetExternalEntityRefHandlerArg(parser, arg) IExpat->XML_SetExternalEntityRefHandlerArg(parser, arg)
+#define XML_SetUnknownEncodingHandler(parser, handler, data) IExpat->XML_SetUnknownEncodingHandler(parser, handler, data)
+#define XML_SetStartNamespaceDeclHandler(parser, start) IExpat->XML_SetStartNamespaceDeclHandler(parser, start)
+#define XML_SetEndNamespaceDeclHandler(parser, end) IExpat->XML_SetEndNamespaceDeclHandler(parser, end)
+#define XML_SetNamespaceDeclHandler(parser, start, end) IExpat->XML_SetNamespaceDeclHandler(parser, start, end)
+#define XML_SetXmlDeclHandler(parser, handler) IExpat->XML_SetXmlDeclHandler(parser, handler)
+#define XML_SetStartDoctypeDeclHandler(parser, start) IExpat->XML_SetStartDoctypeDeclHandler(parser, start)
+#define XML_SetEndDoctypeDeclHandler(parser, end) IExpat->XML_SetEndDoctypeDeclHandler(parser, end)
+#define XML_SetDoctypeDeclHandler(parser, start, end) IExpat->XML_SetDoctypeDeclHandler(parser, start, end)
+#define XML_SetElementDeclHandler(parser, eldecl) IExpat->XML_SetElementDeclHandler(parser, eldecl)
+#define XML_SetAttlistDeclHandler(parser, attdecl) IExpat->XML_SetAttlistDeclHandler(parser, attdecl)
+#define XML_SetEntityDeclHandler(parser, handler) IExpat->XML_SetEntityDeclHandler(parser, handler)
+#define XML_SetUnparsedEntityDeclHandler(parser, handler) IExpat->XML_SetUnparsedEntityDeclHandler(parser, handler)
+#define XML_SetNotationDeclHandler(parser, handler) IExpat->XML_SetNotationDeclHandler(parser, handler)
+#define XML_SetNotStandaloneHandler(parser, handler) IExpat->XML_SetNotStandaloneHandler(parser, handler)
+#define XML_GetErrorCode(parser) IExpat->XML_GetErrorCode(parser)
+#define XML_ErrorString(code) IExpat->XML_ErrorString(code)
+#define XML_GetCurrentByteIndex(parser) IExpat->XML_GetCurrentByteIndex(parser)
+#define XML_GetCurrentLineNumber(parser) IExpat->XML_GetCurrentLineNumber(parser)
+#define XML_GetCurrentColumnNumber(parser) IExpat->XML_GetCurrentColumnNumber(parser)
+#define XML_GetCurrentByteCount(parser) IExpat->XML_GetCurrentByteCount(parser)
+#define XML_GetInputContext(parser, offset, size) IExpat->XML_GetInputContext(parser, offset, size)
+#define XML_SetUserData(parser, userData) IExpat->XML_SetUserData(parser, userData)
+#define XML_DefaultCurrent(parser) IExpat->XML_DefaultCurrent(parser)
+#define XML_UseParserAsHandlerArg(parser) IExpat->XML_UseParserAsHandlerArg(parser)
+#define XML_SetBase(parser, base) IExpat->XML_SetBase(parser, base)
+#define XML_GetBase(parser) IExpat->XML_GetBase(parser)
+#define XML_GetSpecifiedAttributeCount(parser) IExpat->XML_GetSpecifiedAttributeCount(parser)
+#define XML_GetIdAttributeIndex(parser) IExpat->XML_GetIdAttributeIndex(parser)
+#define XML_SetEncoding(parser, encoding) IExpat->XML_SetEncoding(parser, encoding)
+#define XML_SetParamEntityParsing(parser, parsing) IExpat->XML_SetParamEntityParsing(parser, parsing)
+#define XML_SetReturnNSTriplet(parser, do_nst) IExpat->XML_SetReturnNSTriplet(parser, do_nst)
+#define XML_ExpatVersion() IExpat->XML_ExpatVersion()
+#define XML_ExpatVersionInfo() IExpat->XML_ExpatVersionInfo()
+#define XML_ParserReset(parser, encoding) IExpat->XML_ParserReset(parser, encoding)
+#define XML_SetSkippedEntityHandler(parser, handler) IExpat->XML_SetSkippedEntityHandler(parser, handler)
+#define XML_UseForeignDTD(parser, useDTD) IExpat->XML_UseForeignDTD(parser, useDTD)
+#define XML_GetFeatureList() IExpat->XML_GetFeatureList()
+#define XML_StopParser(parser, resumable) IExpat->XML_StopParser(parser, resumable)
+#define XML_ResumeParser(parser) IExpat->XML_ResumeParser(parser)
+#define XML_GetParsingStatus(parser, status) IExpat->XML_GetParsingStatus(parser, status)
+#define XML_FreeContentModel(parser, model) IExpat->XML_FreeContentModel(parser, model)
+#define XML_MemMalloc(parser, size) IExpat->XML_MemMalloc(parser, size)
+#define XML_MemRealloc(parser, ptr, size) IExpat->XML_MemRealloc(parser, ptr, size)
+#define XML_MemFree(parser, ptr) IExpat->XML_MemFree(parser, ptr)
+
+#endif /* INLINE4_EXPAT_H */
diff --git a/expat-2.0.1/amiga/include/interfaces/expat.h b/expat-2.0.1/amiga/include/interfaces/expat.h
new file mode 100755
index 0000000..e9bdf4a
--- /dev/null
+++ b/expat-2.0.1/amiga/include/interfaces/expat.h
@@ -0,0 +1,98 @@
+#ifndef EXPAT_INTERFACE_DEF_H
+#define EXPAT_INTERFACE_DEF_H
+
+/*
+** This file was machine generated by idltool 51.6.
+** Do not edit
+*/
+
+#ifndef EXEC_TYPES_H
+#include <exec/types.h>
+#endif
+#ifndef EXEC_EXEC_H
+#include <exec/exec.h>
+#endif
+#ifndef EXEC_INTERFACES_H
+#include <exec/interfaces.h>
+#endif
+
+#ifndef LIBRARIES_EXPAT_H
+#include <libraries/expat.h>
+#endif
+
+struct ExpatIFace
+{
+ struct InterfaceData Data;
+
+ uint32 APICALL (*Obtain)(struct ExpatIFace *Self);
+ uint32 APICALL (*Release)(struct ExpatIFace *Self);
+ void APICALL (*Expunge)(struct ExpatIFace *Self);
+ struct Interface * APICALL (*Clone)(struct ExpatIFace *Self);
+ XML_Parser APICALL (*XML_ParserCreate)(struct ExpatIFace *Self, const XML_Char * encodingName);
+ XML_Parser APICALL (*XML_ParserCreateNS)(struct ExpatIFace *Self, const XML_Char * encodingName, XML_Char nsSep);
+ XML_Parser APICALL (*XML_ParserCreate_MM)(struct ExpatIFace *Self, const XML_Char * encoding, const XML_Memory_Handling_Suite * memsuite, const XML_Char * namespaceSeparator);
+ XML_Parser APICALL (*XML_ExternalEntityParserCreate)(struct ExpatIFace *Self, XML_Parser parser, const XML_Char * context, const XML_Char * encoding);
+ void APICALL (*XML_ParserFree)(struct ExpatIFace *Self, XML_Parser parser);
+ enum XML_Status APICALL (*XML_Parse)(struct ExpatIFace *Self, XML_Parser parser, const char * s, int len, int isFinal);
+ enum XML_Status APICALL (*XML_ParseBuffer)(struct ExpatIFace *Self, XML_Parser parser, int len, int isFinal);
+ void * APICALL (*XML_GetBuffer)(struct ExpatIFace *Self, XML_Parser parser, int len);
+ void APICALL (*XML_SetStartElementHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_StartElementHandler start);
+ void APICALL (*XML_SetEndElementHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_EndElementHandler end);
+ void APICALL (*XML_SetElementHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_StartElementHandler start, XML_EndElementHandler end);
+ void APICALL (*XML_SetCharacterDataHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_CharacterDataHandler handler);
+ void APICALL (*XML_SetProcessingInstructionHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_ProcessingInstructionHandler handler);
+ void APICALL (*XML_SetCommentHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_CommentHandler handler);
+ void APICALL (*XML_SetStartCdataSectionHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_StartCdataSectionHandler start);
+ void APICALL (*XML_SetEndCdataSectionHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_EndCdataSectionHandler end);
+ void APICALL (*XML_SetCdataSectionHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_StartCdataSectionHandler start, XML_EndCdataSectionHandler end);
+ void APICALL (*XML_SetDefaultHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_DefaultHandler handler);
+ void APICALL (*XML_SetDefaultHandlerExpand)(struct ExpatIFace *Self, XML_Parser parser, XML_DefaultHandler handler);
+ void APICALL (*XML_SetExternalEntityRefHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_ExternalEntityRefHandler handler);
+ void APICALL (*XML_SetExternalEntityRefHandlerArg)(struct ExpatIFace *Self, XML_Parser parser, void * arg);
+ void APICALL (*XML_SetUnknownEncodingHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_UnknownEncodingHandler handler, void * data);
+ void APICALL (*XML_SetStartNamespaceDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_StartNamespaceDeclHandler start);
+ void APICALL (*XML_SetEndNamespaceDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_EndNamespaceDeclHandler end);
+ void APICALL (*XML_SetNamespaceDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_StartNamespaceDeclHandler start, XML_EndNamespaceDeclHandler end);
+ void APICALL (*XML_SetXmlDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_XmlDeclHandler handler);
+ void APICALL (*XML_SetStartDoctypeDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_StartDoctypeDeclHandler start);
+ void APICALL (*XML_SetEndDoctypeDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_EndDoctypeDeclHandler end);
+ void APICALL (*XML_SetDoctypeDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_StartDoctypeDeclHandler start, XML_EndDoctypeDeclHandler end);
+ void APICALL (*XML_SetElementDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_ElementDeclHandler eldecl);
+ void APICALL (*XML_SetAttlistDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_AttlistDeclHandler attdecl);
+ void APICALL (*XML_SetEntityDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_EntityDeclHandler handler);
+ void APICALL (*XML_SetUnparsedEntityDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_UnparsedEntityDeclHandler handler);
+ void APICALL (*XML_SetNotationDeclHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_NotationDeclHandler handler);
+ void APICALL (*XML_SetNotStandaloneHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_NotStandaloneHandler handler);
+ enum XML_Error APICALL (*XML_GetErrorCode)(struct ExpatIFace *Self, XML_Parser parser);
+ const XML_LChar * APICALL (*XML_ErrorString)(struct ExpatIFace *Self, enum XML_Error code);
+ long APICALL (*XML_GetCurrentByteIndex)(struct ExpatIFace *Self, XML_Parser parser);
+ int APICALL (*XML_GetCurrentLineNumber)(struct ExpatIFace *Self, XML_Parser parser);
+ int APICALL (*XML_GetCurrentColumnNumber)(struct ExpatIFace *Self, XML_Parser parser);
+ int APICALL (*XML_GetCurrentByteCount)(struct ExpatIFace *Self, XML_Parser parser);
+ const char * APICALL (*XML_GetInputContext)(struct ExpatIFace *Self, XML_Parser parser, int * offset, int * size);
+ void APICALL (*XML_SetUserData)(struct ExpatIFace *Self, XML_Parser parser, void * userData);
+ void APICALL (*XML_DefaultCurrent)(struct ExpatIFace *Self, XML_Parser parser);
+ void APICALL (*XML_UseParserAsHandlerArg)(struct ExpatIFace *Self, XML_Parser parser);
+ enum XML_Status APICALL (*XML_SetBase)(struct ExpatIFace *Self, XML_Parser parser, const XML_Char * base);
+ const XML_Char * APICALL (*XML_GetBase)(struct ExpatIFace *Self, XML_Parser parser);
+ int APICALL (*XML_GetSpecifiedAttributeCount)(struct ExpatIFace *Self, XML_Parser parser);
+ int APICALL (*XML_GetIdAttributeIndex)(struct ExpatIFace *Self, XML_Parser parser);
+ enum XML_Status APICALL (*XML_SetEncoding)(struct ExpatIFace *Self, XML_Parser parser, const XML_Char * encoding);
+ int APICALL (*XML_SetParamEntityParsing)(struct ExpatIFace *Self, XML_Parser parser, enum XML_ParamEntityParsing parsing);
+ void APICALL (*XML_SetReturnNSTriplet)(struct ExpatIFace *Self, XML_Parser parser, int do_nst);
+ const XML_LChar * APICALL (*XML_ExpatVersion)(struct ExpatIFace *Self);
+ XML_Expat_Version APICALL (*XML_ExpatVersionInfo)(struct ExpatIFace *Self);
+ XML_Bool APICALL (*XML_ParserReset)(struct ExpatIFace *Self, XML_Parser parser, const XML_Char * encoding);
+ void APICALL (*XML_SetSkippedEntityHandler)(struct ExpatIFace *Self, XML_Parser parser, XML_SkippedEntityHandler handler);
+ enum XML_Error APICALL (*XML_UseForeignDTD)(struct ExpatIFace *Self, XML_Parser parser, XML_Bool useDTD);
+ const XML_Feature * APICALL (*XML_GetFeatureList)(struct ExpatIFace *Self);
+ enum XML_Status APICALL (*XML_StopParser)(struct ExpatIFace *Self, XML_Parser parser, XML_Bool resumable);
+ enum XML_Status APICALL (*XML_ResumeParser)(struct ExpatIFace *Self, XML_Parser parser);
+ void APICALL (*XML_GetParsingStatus)(struct ExpatIFace *Self, XML_Parser parser, XML_ParsingStatus * status);
+ void APICALL (*XML_FreeContentModel)(struct ExpatIFace *Self, XML_Parser parser, XML_Content * model);
+ void * APICALL (*XML_MemMalloc)(struct ExpatIFace *Self, XML_Parser parser, size_t size);
+ void * APICALL (*XML_MemRealloc)(struct ExpatIFace *Self, XML_Parser parser, void * ptr, size_t size);
+ void APICALL (*XML_MemFree)(struct ExpatIFace *Self, XML_Parser parser, void * ptr);
+};
+
+#endif /* EXPAT_INTERFACE_DEF_H */
diff --git a/expat-2.0.1/amiga/include/libraries/expat.h b/expat-2.0.1/amiga/include/libraries/expat.h
new file mode 100755
index 0000000..1b57387
--- /dev/null
+++ b/expat-2.0.1/amiga/include/libraries/expat.h
@@ -0,0 +1,566 @@
+#ifndef LIBRARIES_EXPAT_H
+#define LIBRARIES_EXPAT_H
+
+/*
+** Copyright (c) 2001-2007 Expat maintainers.
+**
+** Permission is hereby granted, free of charge, to any person obtaining
+** a copy of this software and associated documentation files (the
+** "Software"), to deal in the Software without restriction, including
+** without limitation the rights to use, copy, modify, merge, publish,
+** distribute, sublicense, and/or sell copies of the Software, and to
+** permit persons to whom the Software is furnished to do so, subject to
+** the following conditions:
+**
+** The above copyright notice and this permission notice shall be included
+** in all copies or substantial portions of the Software.
+**
+** THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+** SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+
+/****************************************************************************/
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef __GNUC__
+ #ifdef __PPC__
+ #pragma pack(2)
+ #endif
+#elif defined(__VBCC__)
+ #pragma amiga-align
+#endif
+
+/****************************************************************************/
+
+
+#include <stdlib.h>
+
+#ifndef XMLCALL
+#define XMLCALL
+#endif
+
+typedef char XML_Char;
+typedef char XML_LChar;
+typedef long XML_Index;
+typedef unsigned long XML_Size;
+
+struct XML_ParserStruct;
+typedef struct XML_ParserStruct *XML_Parser;
+
+typedef unsigned char XML_Bool;
+#define XML_TRUE ((XML_Bool) 1)
+#define XML_FALSE ((XML_Bool) 0)
+
+enum XML_Status {
+ XML_STATUS_ERROR = 0,
+#define XML_STATUS_ERROR XML_STATUS_ERROR
+ XML_STATUS_OK = 1,
+#define XML_STATUS_OK XML_STATUS_OK
+ XML_STATUS_SUSPENDED = 2,
+#define XML_STATUS_SUSPENDED XML_STATUS_SUSPENDED
+};
+
+enum XML_Error {
+ XML_ERROR_NONE,
+ XML_ERROR_NO_MEMORY,
+ XML_ERROR_SYNTAX,
+ XML_ERROR_NO_ELEMENTS,
+ XML_ERROR_INVALID_TOKEN,
+ XML_ERROR_UNCLOSED_TOKEN,
+ XML_ERROR_PARTIAL_CHAR,
+ XML_ERROR_TAG_MISMATCH,
+ XML_ERROR_DUPLICATE_ATTRIBUTE,
+ XML_ERROR_JUNK_AFTER_DOC_ELEMENT,
+ XML_ERROR_PARAM_ENTITY_REF,
+ XML_ERROR_UNDEFINED_ENTITY,
+ XML_ERROR_RECURSIVE_ENTITY_REF,
+ XML_ERROR_ASYNC_ENTITY,
+ XML_ERROR_BAD_CHAR_REF,
+ XML_ERROR_BINARY_ENTITY_REF,
+ XML_ERROR_ATTRIBUTE_EXTERNAL_ENTITY_REF,
+ XML_ERROR_MISPLACED_XML_PI,
+ XML_ERROR_UNKNOWN_ENCODING,
+ XML_ERROR_INCORRECT_ENCODING,
+ XML_ERROR_UNCLOSED_CDATA_SECTION,
+ XML_ERROR_EXTERNAL_ENTITY_HANDLING,
+ XML_ERROR_NOT_STANDALONE,
+ XML_ERROR_UNEXPECTED_STATE,
+ XML_ERROR_ENTITY_DECLARED_IN_PE,
+ XML_ERROR_FEATURE_REQUIRES_XML_DTD,
+ XML_ERROR_CANT_CHANGE_FEATURE_ONCE_PARSING,
+ XML_ERROR_UNBOUND_PREFIX,
+ XML_ERROR_UNDECLARING_PREFIX,
+ XML_ERROR_INCOMPLETE_PE,
+ XML_ERROR_XML_DECL,
+ XML_ERROR_TEXT_DECL,
+ XML_ERROR_PUBLICID,
+ XML_ERROR_SUSPENDED,
+ XML_ERROR_NOT_SUSPENDED,
+ XML_ERROR_ABORTED,
+ XML_ERROR_FINISHED,
+ XML_ERROR_SUSPEND_PE,
+ XML_ERROR_RESERVED_PREFIX_XML,
+ XML_ERROR_RESERVED_PREFIX_XMLNS,
+ XML_ERROR_RESERVED_NAMESPACE_URI
+};
+
+enum XML_Content_Type {
+ XML_CTYPE_EMPTY = 1,
+ XML_CTYPE_ANY,
+ XML_CTYPE_MIXED,
+ XML_CTYPE_NAME,
+ XML_CTYPE_CHOICE,
+ XML_CTYPE_SEQ
+};
+
+enum XML_Content_Quant {
+ XML_CQUANT_NONE,
+ XML_CQUANT_OPT,
+ XML_CQUANT_REP,
+ XML_CQUANT_PLUS
+};
+
+typedef struct XML_cp XML_Content;
+
+struct XML_cp {
+ enum XML_Content_Type type;
+ enum XML_Content_Quant quant;
+ XML_Char * name;
+ unsigned int numchildren;
+ XML_Content * children;
+};
+
+
+typedef void (*XML_ElementDeclHandler) (void *userData,
+ const XML_Char *name,
+ XML_Content *model);
+
+void
+XML_SetElementDeclHandler(XML_Parser parser,
+ XML_ElementDeclHandler eldecl);
+
+typedef void (*XML_AttlistDeclHandler) (
+ void *userData,
+ const XML_Char *elname,
+ const XML_Char *attname,
+ const XML_Char *att_type,
+ const XML_Char *dflt,
+ int isrequired);
+
+void
+XML_SetAttlistDeclHandler(XML_Parser parser,
+ XML_AttlistDeclHandler attdecl);
+
+typedef void (*XML_XmlDeclHandler) (void *userData,
+ const XML_Char *version,
+ const XML_Char *encoding,
+ int standalone);
+
+void
+XML_SetXmlDeclHandler(XML_Parser parser,
+ XML_XmlDeclHandler xmldecl);
+
+
+typedef struct {
+ void *(*malloc_fcn)(size_t size);
+ void *(*realloc_fcn)(void *ptr, size_t size);
+ void (*free_fcn)(void *ptr);
+} XML_Memory_Handling_Suite;
+
+XML_Parser
+XML_ParserCreate(const XML_Char *encoding);
+
+XML_Parser
+XML_ParserCreateNS(const XML_Char *encoding, XML_Char namespaceSeparator);
+
+
+XML_Parser
+XML_ParserCreate_MM(const XML_Char *encoding,
+ const XML_Memory_Handling_Suite *memsuite,
+ const XML_Char *namespaceSeparator);
+
+XML_Bool
+XML_ParserReset(XML_Parser parser, const XML_Char *encoding);
+
+typedef void (*XML_StartElementHandler) (void *userData,
+ const XML_Char *name,
+ const XML_Char **atts);
+
+typedef void (*XML_EndElementHandler) (void *userData,
+ const XML_Char *name);
+
+
+typedef void (*XML_CharacterDataHandler) (void *userData,
+ const XML_Char *s,
+ int len);
+
+typedef void (*XML_ProcessingInstructionHandler) (
+ void *userData,
+ const XML_Char *target,
+ const XML_Char *data);
+
+typedef void (*XML_CommentHandler) (void *userData,
+ const XML_Char *data);
+
+typedef void (*XML_StartCdataSectionHandler) (void *userData);
+typedef void (*XML_EndCdataSectionHandler) (void *userData);
+
+typedef void (*XML_DefaultHandler) (void *userData,
+ const XML_Char *s,
+ int len);
+
+typedef void (*XML_StartDoctypeDeclHandler) (
+ void *userData,
+ const XML_Char *doctypeName,
+ const XML_Char *sysid,
+ const XML_Char *pubid,
+ int has_internal_subset);
+
+typedef void (*XML_EndDoctypeDeclHandler)(void *userData);
+
+typedef void (*XML_EntityDeclHandler) (
+ void *userData,
+ const XML_Char *entityName,
+ int is_parameter_entity,
+ const XML_Char *value,
+ int value_length,
+ const XML_Char *base,
+ const XML_Char *systemId,
+ const XML_Char *publicId,
+ const XML_Char *notationName);
+
+void
+XML_SetEntityDeclHandler(XML_Parser parser,
+ XML_EntityDeclHandler handler);
+
+typedef void (*XML_UnparsedEntityDeclHandler) (
+ void *userData,
+ const XML_Char *entityName,
+ const XML_Char *base,
+ const XML_Char *systemId,
+ const XML_Char *publicId,
+ const XML_Char *notationName);
+
+typedef void (*XML_NotationDeclHandler) (
+ void *userData,
+ const XML_Char *notationName,
+ const XML_Char *base,
+ const XML_Char *systemId,
+ const XML_Char *publicId);
+
+typedef void (*XML_StartNamespaceDeclHandler) (
+ void *userData,
+ const XML_Char *prefix,
+ const XML_Char *uri);
+
+typedef void (*XML_EndNamespaceDeclHandler) (
+ void *userData,
+ const XML_Char *prefix);
+
+typedef int (*XML_NotStandaloneHandler) (void *userData);
+
+typedef int (*XML_ExternalEntityRefHandler) (
+ XML_Parser parser,
+ const XML_Char *context,
+ const XML_Char *base,
+ const XML_Char *systemId,
+ const XML_Char *publicId);
+
+typedef void (*XML_SkippedEntityHandler) (
+ void *userData,
+ const XML_Char *entityName,
+ int is_parameter_entity);
+
+typedef struct {
+ int map[256];
+ void *data;
+ int (*convert)(void *data, const char *s);
+ void (*release)(void *data);
+} XML_Encoding;
+
+typedef int (*XML_UnknownEncodingHandler) (
+ void *encodingHandlerData,
+ const XML_Char *name,
+ XML_Encoding *info);
+
+void
+XML_SetElementHandler(XML_Parser parser,
+ XML_StartElementHandler start,
+ XML_EndElementHandler end);
+
+void
+XML_SetStartElementHandler(XML_Parser parser,
+ XML_StartElementHandler handler);
+
+void
+XML_SetEndElementHandler(XML_Parser parser,
+ XML_EndElementHandler handler);
+
+void
+XML_SetCharacterDataHandler(XML_Parser parser,
+ XML_CharacterDataHandler handler);
+
+void
+XML_SetProcessingInstructionHandler(XML_Parser parser,
+ XML_ProcessingInstructionHandler handler);
+void
+XML_SetCommentHandler(XML_Parser parser,
+ XML_CommentHandler handler);
+
+void
+XML_SetCdataSectionHandler(XML_Parser parser,
+ XML_StartCdataSectionHandler start,
+ XML_EndCdataSectionHandler end);
+
+void
+XML_SetStartCdataSectionHandler(XML_Parser parser,
+ XML_StartCdataSectionHandler start);
+
+void
+XML_SetEndCdataSectionHandler(XML_Parser parser,
+ XML_EndCdataSectionHandler end);
+
+void
+XML_SetDefaultHandler(XML_Parser parser,
+ XML_DefaultHandler handler);
+
+void
+XML_SetDefaultHandlerExpand(XML_Parser parser,
+ XML_DefaultHandler handler);
+
+void
+XML_SetDoctypeDeclHandler(XML_Parser parser,
+ XML_StartDoctypeDeclHandler start,
+ XML_EndDoctypeDeclHandler end);
+
+void
+XML_SetStartDoctypeDeclHandler(XML_Parser parser,
+ XML_StartDoctypeDeclHandler start);
+
+void
+XML_SetEndDoctypeDeclHandler(XML_Parser parser,
+ XML_EndDoctypeDeclHandler end);
+
+void
+XML_SetUnparsedEntityDeclHandler(XML_Parser parser,
+ XML_UnparsedEntityDeclHandler handler);
+
+void
+XML_SetNotationDeclHandler(XML_Parser parser,
+ XML_NotationDeclHandler handler);
+
+void
+XML_SetNamespaceDeclHandler(XML_Parser parser,
+ XML_StartNamespaceDeclHandler start,
+ XML_EndNamespaceDeclHandler end);
+
+void
+XML_SetStartNamespaceDeclHandler(XML_Parser parser,
+ XML_StartNamespaceDeclHandler start);
+
+void
+XML_SetEndNamespaceDeclHandler(XML_Parser parser,
+ XML_EndNamespaceDeclHandler end);
+
+void
+XML_SetNotStandaloneHandler(XML_Parser parser,
+ XML_NotStandaloneHandler handler);
+
+void
+XML_SetExternalEntityRefHandler(XML_Parser parser,
+ XML_ExternalEntityRefHandler handler);
+
+void
+XML_SetExternalEntityRefHandlerArg(XML_Parser parser,
+ void *arg);
+
+void
+XML_SetSkippedEntityHandler(XML_Parser parser,
+ XML_SkippedEntityHandler handler);
+
+void
+XML_SetUnknownEncodingHandler(XML_Parser parser,
+ XML_UnknownEncodingHandler handler,
+ void *encodingHandlerData);
+
+void
+XML_DefaultCurrent(XML_Parser parser);
+
+void
+XML_SetReturnNSTriplet(XML_Parser parser, int do_nst);
+
+void
+XML_SetUserData(XML_Parser parser, void *userData);
+
+#define XML_GetUserData(parser) (*(void **)(parser))
+
+enum XML_Status
+XML_SetEncoding(XML_Parser parser, const XML_Char *encoding);
+
+void
+XML_UseParserAsHandlerArg(XML_Parser parser);
+
+enum XML_Error
+XML_UseForeignDTD(XML_Parser parser, XML_Bool useDTD);
+
+
+enum XML_Status
+XML_SetBase(XML_Parser parser, const XML_Char *base);
+
+const XML_Char *
+XML_GetBase(XML_Parser parser);
+
+int
+XML_GetSpecifiedAttributeCount(XML_Parser parser);
+
+int
+XML_GetIdAttributeIndex(XML_Parser parser);
+
+enum XML_Status
+XML_Parse(XML_Parser parser, const char *s, int len, int isFinal);
+
+void *
+XML_GetBuffer(XML_Parser parser, int len);
+
+enum XML_Status
+XML_ParseBuffer(XML_Parser parser, int len, int isFinal);
+
+enum XML_Status
+XML_StopParser(XML_Parser parser, XML_Bool resumable);
+
+enum XML_Status
+XML_ResumeParser(XML_Parser parser);
+
+enum XML_Parsing {
+ XML_INITIALIZED,
+ XML_PARSING,
+ XML_FINISHED,
+ XML_SUSPENDED
+};
+
+typedef struct {
+ enum XML_Parsing parsing;
+ XML_Bool finalBuffer;
+} XML_ParsingStatus;
+
+void
+XML_GetParsingStatus(XML_Parser parser, XML_ParsingStatus *status);
+
+XML_Parser
+XML_ExternalEntityParserCreate(XML_Parser parser,
+ const XML_Char *context,
+ const XML_Char *encoding);
+
+enum XML_ParamEntityParsing {
+ XML_PARAM_ENTITY_PARSING_NEVER,
+ XML_PARAM_ENTITY_PARSING_UNLESS_STANDALONE,
+ XML_PARAM_ENTITY_PARSING_ALWAYS
+};
+
+int
+XML_SetParamEntityParsing(XML_Parser parser,
+ enum XML_ParamEntityParsing parsing);
+
+enum XML_Error
+XML_GetErrorCode(XML_Parser parser);
+
+int XML_GetCurrentLineNumber(XML_Parser parser);
+int XML_GetCurrentColumnNumber(XML_Parser parser);
+long XML_GetCurrentByteIndex(XML_Parser parser);
+
+int
+XML_GetCurrentByteCount(XML_Parser parser);
+
+const char *
+XML_GetInputContext(XML_Parser parser,
+ int *offset,
+ int *size);
+
+#define XML_GetErrorLineNumber XML_GetCurrentLineNumber
+#define XML_GetErrorColumnNumber XML_GetCurrentColumnNumber
+#define XML_GetErrorByteIndex XML_GetCurrentByteIndex
+
+void
+XML_FreeContentModel(XML_Parser parser, XML_Content *model);
+
+void *
+XML_MemMalloc(XML_Parser parser, size_t size);
+
+void *
+XML_MemRealloc(XML_Parser parser, void *ptr, size_t size);
+
+void
+XML_MemFree(XML_Parser parser, void *ptr);
+
+void
+XML_ParserFree(XML_Parser parser);
+
+const XML_LChar *
+XML_ErrorString(enum XML_Error code);
+
+const XML_LChar *
+XML_ExpatVersion(void);
+
+typedef struct {
+ int major;
+ int minor;
+ int micro;
+} XML_Expat_Version;
+
+XML_Expat_Version
+XML_ExpatVersionInfo(void);
+
+enum XML_FeatureEnum {
+ XML_FEATURE_END = 0,
+ XML_FEATURE_UNICODE,
+ XML_FEATURE_UNICODE_WCHAR_T,
+ XML_FEATURE_DTD,
+ XML_FEATURE_CONTEXT_BYTES,
+ XML_FEATURE_MIN_SIZE,
+ XML_FEATURE_SIZEOF_XML_CHAR,
+ XML_FEATURE_SIZEOF_XML_LCHAR,
+ XML_FEATURE_NS,
+ XML_FEATURE_LARGE_SIZE
+};
+
+typedef struct {
+ enum XML_FeatureEnum feature;
+ const XML_LChar *name;
+ long int value;
+} XML_Feature;
+
+const XML_Feature *
+XML_GetFeatureList(void);
+
+
+#define XML_MAJOR_VERSION 2
+#define XML_MINOR_VERSION 0
+#define XML_MICRO_VERSION 1
+
+
+/****************************************************************************/
+
+#ifdef __GNUC__
+ #ifdef __PPC__
+ #pragma pack()
+ #endif
+#elif defined(__VBCC__)
+ #pragma default-align
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+/****************************************************************************/
+
+#endif /* EXPAT_EXPAT_H */
diff --git a/expat-2.0.1/amiga/include/proto/expat.h b/expat-2.0.1/amiga/include/proto/expat.h
new file mode 100755
index 0000000..90bf62c
--- /dev/null
+++ b/expat-2.0.1/amiga/include/proto/expat.h
@@ -0,0 +1,52 @@
+#ifndef PROTO_EXPAT_H
+#define PROTO_EXPAT_H
+
+#ifndef LIBRARIES_EXPAT_H
+#include <libraries/expat.h>
+#endif
+
+/****************************************************************************/
+
+#ifndef __NOLIBBASE__
+ #ifndef __USE_BASETYPE__
+ extern struct Library * ExpatBase;
+ #else
+ extern struct Library * ExpatBase;
+ #endif /* __USE_BASETYPE__ */
+#endif /* __NOLIBBASE__ */
+
+/****************************************************************************/
+
+#ifdef __amigaos4__
+ #include <interfaces/expat.h>
+ #ifdef __USE_INLINE__
+ #include <inline4/expat.h>
+ #endif /* __USE_INLINE__ */
+ #ifndef CLIB_EXPAT_PROTOS_H
+ #define CLIB_EXPAT_PROTOS_H 1
+ #endif /* CLIB_EXPAT_PROTOS_H */
+ #ifndef __NOGLOBALIFACE__
+ extern struct ExpatIFace *IExpat;
+ #endif /* __NOGLOBALIFACE__ */
+#else /* __amigaos4__ */
+ #ifndef CLIB_EXPAT_PROTOS_H
+ #include <clib/expat_protos.h>
+ #endif /* CLIB_EXPAT_PROTOS_H */
+ #if defined(__GNUC__)
+ #ifndef __PPC__
+ #include <inline/expat.h>
+ #else
+ #include <ppcinline/expat.h>
+ #endif /* __PPC__ */
+ #elif defined(__VBCC__)
+ #ifndef __PPC__
+ #include <inline/expat_protos.h>
+ #endif /* __PPC__ */
+ #else
+ #include <pragmas/expat_pragmas.h>
+ #endif /* __GNUC__ */
+#endif /* __amigaos4__ */
+
+/****************************************************************************/
+
+#endif /* PROTO_EXPAT_H */
diff --git a/expat-2.0.1/amiga/launch.c b/expat-2.0.1/amiga/launch.c
new file mode 100755
index 0000000..73e526e
--- /dev/null
+++ b/expat-2.0.1/amiga/launch.c
@@ -0,0 +1,56 @@
+/*
+** Copyright (c) 2001-2007 Expat maintainers.
+**
+** Permission is hereby granted, free of charge, to any person obtaining
+** a copy of this software and associated documentation files (the
+** "Software"), to deal in the Software without restriction, including
+** without limitation the rights to use, copy, modify, merge, publish,
+** distribute, sublicense, and/or sell copies of the Software, and to
+** permit persons to whom the Software is furnished to do so, subject to
+** the following conditions:
+**
+** The above copyright notice and this permission notice shall be included
+** in all copies or substantial portions of the Software.
+**
+** THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+** SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include <stdlib.h>
+#include <proto/exec.h>
+
+struct Library* ExpatBase = 0;
+struct ExpatIFace* IExpat = 0;
+
+
+void setup() __attribute__((constructor));
+void cleanup() __attribute__((destructor));
+
+
+void setup()
+{
+ ExpatBase = OpenLibrary("expat.library", 4);
+ IExpat = (struct ExpatIFace*)GetInterface(ExpatBase, "main", 1, NULL);
+ if ( IExpat == 0 ) {
+ DebugPrintF("Can't open expat.library\n");
+ }
+}
+
+
+void cleanup()
+{
+ if ( IExpat != 0 ) {
+ DropInterface((struct Interface*)IExpat);
+ IExpat = 0;
+ }
+
+ if ( ExpatBase != 0 ) {
+ CloseLibrary(ExpatBase);
+ ExpatBase = 0;
+ }
+}
diff --git a/expat-2.0.1/amiga/stdlib.c b/expat-2.0.1/amiga/stdlib.c
new file mode 100755
index 0000000..8c31f23
--- /dev/null
+++ b/expat-2.0.1/amiga/stdlib.c
@@ -0,0 +1,109 @@
+/*
+** Copyright (c) 2001-2007 Expat maintainers.
+**
+** Permission is hereby granted, free of charge, to any person obtaining
+** a copy of this software and associated documentation files (the
+** "Software"), to deal in the Software without restriction, including
+** without limitation the rights to use, copy, modify, merge, publish,
+** distribute, sublicense, and/or sell copies of the Software, and to
+** permit persons to whom the Software is furnished to do so, subject to
+** the following conditions:
+**
+** The above copyright notice and this permission notice shall be included
+** in all copies or substantial portions of the Software.
+**
+** THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+** EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+** MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+** IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+** CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+** TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+** SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+*/
+
+#include <stdlib.h>
+#include <exec/memory.h>
+#include <proto/exec.h>
+#include <proto/utility.h>
+
+void * malloc (size_t len)
+{
+ uint32 size = sizeof(uint32) + len;
+
+ uint32 *mem = AllocMem(size, MEMF_SHARED);
+ if ( mem != 0 ) {
+ *mem = size;
+ ++mem;
+ }
+
+ return mem;
+}
+
+
+void * realloc (void * mem, size_t len2)
+{
+ if ( mem == 0 ) {
+ return malloc(len2);
+ }
+
+ if ( len2 == 0 ) {
+ free(mem);
+ return 0;
+ }
+
+ void * new_mem = malloc(len2);
+ if ( new_mem == 0 ) {
+ return 0;
+ }
+
+ uint32 mem_size = *(((uint32*)mem) - 1);
+ CopyMem(mem, new_mem, mem_size);
+ free(mem);
+
+ return new_mem;
+}
+
+
+void free (void * mem)
+{
+ if ( mem != 0 ) {
+ uint32 * size_ptr = ((uint32*)mem) - 1;
+ FreeMem(size_ptr, *size_ptr);
+ }
+}
+
+
+int memcmp (const void * a, const void * b, size_t len)
+{
+ size_t i;
+ int diff;
+
+ for ( i = 0; i < len; ++i ) {
+ diff = *((uint8 *)a++) - *((uint8 *)b++);
+ if ( diff ) {
+ return diff;
+ }
+ }
+
+ return 0;
+}
+
+
+void * memcpy (void * t, const void * a, size_t len)
+{
+ CopyMem((APTR)a, t, len);
+ return t;
+}
+
+
+void * memmove (void * t1, const void * t2, size_t len)
+{
+ MoveMem((APTR)t2, t1, len);
+ return t1;
+}
+
+
+void * memset (void * t, int c, size_t len)
+{
+ return SetMem(t, c, len);
+}
diff --git a/expat-2.0.1/bcb5/README.txt b/expat-2.0.1/bcb5/README.txt
new file mode 100755
index 0000000..486f1ca
--- /dev/null
+++ b/expat-2.0.1/bcb5/README.txt
@@ -0,0 +1,87 @@
+
+ Using a Borland compiler product
+
+The files in this directory support using both the free Borland command-line
+compiler tools and the Borland C++ Builder IDE. The project files have been
+tested with both versions 5 and 6 of the C++ Builder product.
+
+ Using the free BCC32 command line compiler
+
+After downloading and installing the free C++ Builder commandline version,
+perform the following steps (assuming it was installed under C:\Borland\BCC55):
+
+1) Add "C:\Borland\BCC55\BIN" to your path
+2) Set the environment variable BCB to "C:\Borland\BCC55".
+3) edit makefile.mak: enable or comment out the appropriate commands under
+ clean & distclean, depending on whether your OS can use deltree /y or
+ del /s/f/q.
+
+After that, you should simply cd to the bcb5 directory in your Expat directory
+tree (same structure as CVS) and run "make all" or just "make".
+
+ Naming
+
+The libraries have the base name "libexpat" followed optionally by an "s"
+(static) or a "w" (unicode version), then an underscore and optionally
+"mt" (multi-threaded) and "d" (dynamic RTL).
+
+To change the name of the library a project file produces, edit the project
+option source (see step 1 under Unicode below) and change the name contained in
+the PROJECT tag. In a make file, change the value assigned to the PROJECT
+variable. Also, the LIBRARY entry in the .def file has to be changed to
+correspond to the new executable name.
+
+
+ Unicode Considerations
+
+There are no facilities in the BCB 5 GUI to create a unicode-enabled
+application. Fortunately, it is not hard to do by hand.
+
+1. The startup .obj system file must be changed to the unicode version.
+ Go to Project|Edit Option Source, and scroll down to the ALLOBJ tag. Change
+ c0x32.obj to c0x32w.obj. Editing this file can be quirky, but usually the
+ following kludge will make the change stick. Close and save the file
+ (CTRL-F4) then open the options dialog (CTRL-Shift-F11), then click OK on
+ the dialog immediately without changing anything in it. If this doesn't work,
+ you will have to close the project completely and edit the .bpr file by hand.
+
+ If you are using a make file, just change the startup .obj file assigned
+ to the ALLOBJ variable.
+
+2. Add the macro define XML_UNICODE_WCHAR_T. In the GUI that goes in the options
+ dialog, Directories/Conditionals tab, in the Conditional define box. In a
+ make file, put it in the USERDEFINES variable.
+
+3. Of course, your code has to be written for unicode. As a start, the "main"
+ function is called "wmain". The tchar macros are an interesting way to
+ write code that can easily switch between unicode and utf-8. If these macros
+ are used, then simply adding the conditional define _UNICODE as well as
+ XML_UNICODE_WCHAR_T will bring in the unicode versions of the tchar macros.
+ Otherwise the utf-8 versions are used. xmlwf uses its own versions of the
+ tchar macros which are switched on and off by the XML_UNICODE macro, which
+ itself is set by the XML_UNICODE_WCHAR_T define.
+
+ Threading
+
+The libexpat libraries are all built to link with the multi-threaded dynamic RTL's.
+That means they require CC32xxMT.DLL present on the installation target.
+To create single-threaded libs, do the following:
+
+1. The compiler option for multi-threading must be turned off. Following the
+ instructions above to edit the option source, remove the -tWM option from
+ the CFLAG1 tag. In a make file, remove it from the CFLAG1 variable.
+
+2. The single threaded RTL must be called. change the RTL in the ALLLIB tag or
+ variable (GUI or makefile repectively) to the version without the "mt" in the
+ name. For example, change cw32mti.lib to cw32i.lib.
+
+ Static RTL's
+
+To build the libs with static RTL's do the following,
+
+1. For the static expatlibs, in the Tlib tab on the options dialog, uncheck the
+ "Use dynamic RTL" box. For the dynamic expatlibs, in the Linker tab on the
+ options dialog, uncheck "Use dynamic RTL". If you are using a make file,
+ remove the _RTLDLL assignment to the SYSDEFINES variable, and change the RTL
+ to the version without an "i" in the ALLLIB variable. For example,
+ cw32mti.lib would become cw32mt.lib.
diff --git a/expat-2.0.1/bcb5/all_projects.bpg b/expat-2.0.1/bcb5/all_projects.bpg
new file mode 100755
index 0000000..27c9a1c
--- /dev/null
+++ b/expat-2.0.1/bcb5/all_projects.bpg
@@ -0,0 +1,49 @@
+#------------------------------------------------------------------------------
+VERSION = BWS.01
+#------------------------------------------------------------------------------
+!ifndef ROOT
+ROOT = $(MAKEDIR)\..
+!endif
+#------------------------------------------------------------------------------
+MAKE = $(ROOT)\bin\make.exe -$(MAKEFLAGS) -f$**
+DCC = $(ROOT)\bin\dcc32.exe $**
+BRCC = $(ROOT)\bin\brcc32.exe $**
+#------------------------------------------------------------------------------
+PROJECTS = setup libexpat_mtd.dll libexpats_mtd.lib libexpatw_mtd.dll \
+ libexpatws_mtd.lib elements.exe outline.exe xmlwf.exe
+#------------------------------------------------------------------------------
+default: $(PROJECTS)
+#------------------------------------------------------------------------------
+
+libexpat_mtd.dll: expat.bpr
+ $(ROOT)\bin\bpr2mak $**
+ $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+libexpats_mtd.lib: expat_static.bpr
+ $(ROOT)\bin\bpr2mak -t$(ROOT)\bin\deflib.bmk $**
+ $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+libexpatw_mtd.dll: expatw.bpr
+ $(ROOT)\bin\bpr2mak $**
+ $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+libexpatws_mtd.lib: expatw_static.bpr
+ $(ROOT)\bin\bpr2mak -t$(ROOT)\bin\deflib.bmk $**
+ $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+elements.exe: elements.bpr
+ $(ROOT)\bin\bpr2mak $**
+ $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+outline.exe: outline.bpr
+ $(ROOT)\bin\bpr2mak $**
+ $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+xmlwf.exe: xmlwf.bpr
+ $(ROOT)\bin\bpr2mak $**
+ $(ROOT)\bin\make -$(MAKEFLAGS) -f$*.mak
+
+setup: setup.bat
+ call $**
+
+
diff --git a/expat-2.0.1/bcb5/elements.bpf b/expat-2.0.1/bcb5/elements.bpf
new file mode 100755
index 0000000..5c1e878
--- /dev/null
+++ b/expat-2.0.1/bcb5/elements.bpf
@@ -0,0 +1,4 @@
+USEUNIT("..\examples\elements.c");
+USELIB("Release\libexpats_mtd.lib");
+//---------------------------------------------------------------------------
+main
diff --git a/expat-2.0.1/bcb5/elements.bpr b/expat-2.0.1/bcb5/elements.bpr
new file mode 100755
index 0000000..c21c0f5
--- /dev/null
+++ b/expat-2.0.1/bcb5/elements.bpr
@@ -0,0 +1,149 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+ <MACROS>
+ <VERSION value="BCB.05.03"/>
+ <PROJECT value="Release\elements.exe"/>
+ <OBJFILES value="Release\obj\examples\elements.obj"/>
+ <RESFILES value=""/>
+ <IDLFILES value=""/>
+ <IDLGENFILES value=""/>
+ <DEFFILE value=""/>
+ <RESDEPEN value="$(RESFILES)"/>
+ <LIBFILES value="Release\libexpats_mtd.lib"/>
+ <LIBRARIES value=""/>
+ <SPARELIBS value=""/>
+ <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+ <PATHCPP value=".;..\examples"/>
+ <PATHPAS value=".;"/>
+ <PATHRC value=".;"/>
+ <PATHASM value=".;"/>
+ <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+ <RELEASELIBPATH value="$(BCB)\lib\release"/>
+ <LINKER value="ilink32"/>
+ <USERDEFINES value="WIN32;NDEBUG;_CONSOLE;XML_STATIC"/>
+ <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+ <MAINSOURCE value="elements.bpf"/>
+ <INCLUDEPATH value="..\examples;$(BCB)\include"/>
+ <LIBPATH value="..\examples;$(BCB)\lib;$(RELEASELIBPATH)"/>
+ <WARNINGS value="-w-par -w-8027 -w-8026"/>
+ </MACROS>
+ <OPTIONS>
+ <IDLCFLAGS value="-I$(BCB)\include"/>
+ <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c"/>
+ <PFLAGS value="-N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-"/>
+ <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/>
+ <AFLAGS value="/mx /w2 /zn"/>
+ <LFLAGS value="-IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q -L..\LIB\RELEASE_STATIC"/>
+ </OPTIONS>
+ <LINKER>
+ <ALLOBJ value="c0x32.obj $(OBJFILES)"/>
+ <ALLRES value="$(RESFILES)"/>
+ <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+ </LINKER>
+ <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\examples;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=8
+Item0=..\examples;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\examples;$(BCB)\lib;..\examples\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);..\lib\Release-w_static
+Item4=$(BCB)\lib;$(RELEASELIBPATH);..\lib\Release_static
+Item5=$(BCB)\lib;$(RELEASELIBPATH);C:\src\expat\lib\Release_static
+Item6=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item7=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=17
+Item0=WIN32;NDEBUG;_CONSOLE;XML_STATIC
+Item1=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_STATIC
+Item2=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE;XML_STATIC
+Item3=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE
+Item4=WIN32;NDEBUG;_CONSOLE;_DEBUG
+Item5=WIN32;NDEBUG;_CONSOLE;XML_STATIC;_DEBUG
+Item6=WIN32;NDEBUG;_CONSOLE;XML_STATIC;_DEBUG;_UNICODE
+Item7=WIN32;NDEBUG;_CONSOLE;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T
+Item8=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T
+Item9=WIN32;NDEBUG;_CONSOLE;_UNICODE;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T
+Item10=WIN32;NDEBUG;_CONSOLE;_UNICODE;XML_STATIC;_DEBUG;XML_UNICODE
+Item11=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T;__WCHAR_T
+Item12=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE
+Item13=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE;_UNICODE
+Item14=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG;XML_UNICODE
+Item15=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC;_DEBUG
+Item16=WIN32;NDEBUG;_CONSOLE;_MBCS;XML_STATIC
+
+[HistoryLists\hlIntOutputDir]
+Count=5
+Item0=Release\obj\examples
+Item1=Release\obj\elements
+Item2=Release\obj\mts
+Item3=..\examples\Release
+Item4=Release
+
+[HistoryLists\hlFinalOutputDir]
+Count=1
+Item0=Release\
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+ </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat-2.0.1/bcb5/elements.mak b/expat-2.0.1/bcb5/elements.mak
new file mode 100755
index 0000000..d4427fd
--- /dev/null
+++ b/expat-2.0.1/bcb5/elements.mak
@@ -0,0 +1,186 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\elements.exe
+OBJFILES = Release\obj\examples\elements.obj
+RESFILES =
+MAINSOURCE = elements.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = Release\libexpats_mtd.lib
+IDLFILES =
+IDLGENFILES =
+LIBRARIES =
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS =
+DEFFILE =
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\examples
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = WIN32;NDEBUG;_CONSOLE;XML_STATIC
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\examples;$(BCB)\include
+LIBPATH = ..\examples;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-par -w-8027 -w-8026
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -I..\lib -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q -L..\LIB\RELEASE_STATIC
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE. It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+ $(BCB)\BIN\$(LINKER) @&&!
+ $(LFLAGS) -L$(LIBPATH) +
+ $(ALLOBJ), +
+ $(PROJECT),, +
+ $(ALLLIB), +
+ $(DEFFILE), +
+ $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+ $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+ $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat-2.0.1/bcb5/expat.bpf b/expat-2.0.1/bcb5/expat.bpf
new file mode 100755
index 0000000..2c42328
--- /dev/null
+++ b/expat-2.0.1/bcb5/expat.bpf
@@ -0,0 +1,6 @@
+USEUNIT("..\lib\xmlparse.c");
+USEUNIT("..\lib\xmlrole.c");
+USEUNIT("..\lib\xmltok.c");
+USEDEF("libexpat_mtd.def");
+//---------------------------------------------------------------------------
+#define DllEntryPoint
diff --git a/expat-2.0.1/bcb5/expat.bpr b/expat-2.0.1/bcb5/expat.bpr
new file mode 100755
index 0000000..291b8ca
--- /dev/null
+++ b/expat-2.0.1/bcb5/expat.bpr
@@ -0,0 +1,140 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+ <MACROS>
+ <VERSION value="BCB.05.03"/>
+ <PROJECT value="Release\libexpat_mtd.dll"/>
+ <OBJFILES value="Release\obj\libexpat\xmlparse.obj Release\obj\libexpat\xmlrole.obj
+ Release\obj\libexpat\xmltok.obj"/>
+ <RESFILES value=""/>
+ <IDLFILES value=""/>
+ <IDLGENFILES value=""/>
+ <DEFFILE value="libexpat_mtd.def"/>
+ <RESDEPEN value="$(RESFILES)"/>
+ <LIBFILES value=""/>
+ <LIBRARIES value=""/>
+ <SPARELIBS value=""/>
+ <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+ <PATHCPP value=".;..\lib"/>
+ <PATHPAS value=".;"/>
+ <PATHRC value=".;"/>
+ <PATHASM value=".;"/>
+ <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+ <RELEASELIBPATH value="$(BCB)\lib\release"/>
+ <LINKER value="ilink32"/>
+ <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS"/>
+ <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+ <MAINSOURCE value="expat.bpf"/>
+ <INCLUDEPATH value="..\lib;$(BCB)\include"/>
+ <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/>
+ <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/>
+ </MACROS>
+ <OPTIONS>
+ <IDLCFLAGS value="-I$(BCB)\include"/>
+ <CFLAG1 value="-WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD"/>
+ <PFLAGS value="-N2Release\obj\libexpat -N0Release\obj\libexpat -$Y- -$L- -$D-"/>
+ <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/>
+ <AFLAGS value="/mx /w2 /zn"/>
+ <LFLAGS value="-IRelease\obj\libexpat -D"" -aa -Tpd -x -Gn -Gi -q"/>
+ </OPTIONS>
+ <LINKER>
+ <ALLOBJ value="c0d32.obj $(OBJFILES)"/>
+ <ALLRES value="$(RESFILES)"/>
+ <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+ </LINKER>
+ <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\lib;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=8
+Item0=_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS
+Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS
+Item2=WIN32;_WINDOWS;NDEBUG;_DEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS
+Item3=WIN32;_WINDOWS;NDEBUG;_DEBUG;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP
+Item4=NDEBUG;WIN32;_WINDOWS;_USRDLL;_DEBUG;EXPAT_EXPORTS;COMPILED_FROM_DSP
+Item5=NDEBUG;WIN32;_WINDOWS;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP;_DEBUG
+Item6=NDEBUG;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP;_DEBUG
+Item7=NDEBUG;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP
+
+[HistoryLists\hlIntOutputDir]
+Count=7
+Item0=Release\obj\libexpat
+Item1=Release\obj\libexpat_static
+Item2=Release\obj\mtd
+Item3=Release\obj\mt
+Item4=Release\obj
+Item5=Release
+Item6=..\lib\Release
+
+[HistoryLists\hlFinalOutputDir]
+Count=1
+Item0=Release\
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+ </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat-2.0.1/bcb5/expat.mak b/expat-2.0.1/bcb5/expat.mak
new file mode 100755
index 0000000..7c9c23f
--- /dev/null
+++ b/expat-2.0.1/bcb5/expat.mak
@@ -0,0 +1,187 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\libexpat_mtd.dll
+OBJFILES = Release\obj\libexpat\xmlparse.obj Release\obj\libexpat\xmlrole.obj \
+ Release\obj\libexpat\xmltok.obj
+RESFILES =
+MAINSOURCE = expat.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES =
+IDLFILES =
+IDLGENFILES =
+LIBRARIES =
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS =
+DEFFILE = libexpat_mtd.def
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\lib
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = _WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\lib;$(BCB)\include
+LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-rch -w-par -w-8027 -w-8026 -w-ccc
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\libexpat -N0Release\obj\libexpat -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\libexpat -D"" -aa -Tpd -x -Gn -Gi -q
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE. It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+ $(BCB)\BIN\$(LINKER) @&&!
+ $(LFLAGS) -L$(LIBPATH) +
+ $(ALLOBJ), +
+ $(PROJECT),, +
+ $(ALLLIB), +
+ $(DEFFILE), +
+ $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+ $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+ $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat-2.0.1/bcb5/expat_static.bpf b/expat-2.0.1/bcb5/expat_static.bpf
new file mode 100755
index 0000000..5ca458e
--- /dev/null
+++ b/expat-2.0.1/bcb5/expat_static.bpf
@@ -0,0 +1,5 @@
+USEUNIT("..\lib\xmlparse.c");
+USEUNIT("..\lib\xmlrole.c");
+USEUNIT("..\lib\xmltok.c");
+//---------------------------------------------------------------------------
+#define Library
diff --git a/expat-2.0.1/bcb5/expat_static.bpr b/expat-2.0.1/bcb5/expat_static.bpr
new file mode 100755
index 0000000..2f6ec4d
--- /dev/null
+++ b/expat-2.0.1/bcb5/expat_static.bpr
@@ -0,0 +1,143 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+ <MACROS>
+ <VERSION value="BCB.05.03"/>
+ <PROJECT value="Release\libexpats_mtd.lib"/>
+ <OBJFILES value="Release\obj\libexpat_static\xmlparse.obj
+ Release\obj\libexpat_static\xmlrole.obj
+ Release\obj\libexpat_static\xmltok.obj"/>
+ <RESFILES value=""/>
+ <IDLFILES value=""/>
+ <IDLGENFILES value=""/>
+ <DEFFILE value=""/>
+ <RESDEPEN value="$(RESFILES)"/>
+ <LIBFILES value=""/>
+ <LIBRARIES value=""/>
+ <SPARELIBS value=""/>
+ <PACKAGES value=""/>
+ <PATHCPP value=".;..\lib"/>
+ <PATHPAS value=".;"/>
+ <PATHRC value=".;"/>
+ <PATHASM value=".;"/>
+ <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+ <RELEASELIBPATH value="$(BCB)\lib\release"/>
+ <LINKER value="TLib"/>
+ <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC"/>
+ <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+ <MAINSOURCE value="expat_static.bpf"/>
+ <INCLUDEPATH value="..\lib;$(BCB)\include"/>
+ <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/>
+ <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/>
+ <LISTFILE value=""/>
+ </MACROS>
+ <OPTIONS>
+ <IDLCFLAGS value="-I$(BCB)\include"/>
+ <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -c"/>
+ <PFLAGS value="-N2Release\obj\libexpat_static -N0Release\obj\libexpat_static -$Y- -$L- -$D-"/>
+ <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/>
+ <AFLAGS value="/mx /w2 /zn"/>
+ <LFLAGS value=""/>
+ </OPTIONS>
+ <LINKER>
+ <ALLOBJ value="$(OBJFILES)"/>
+ <ALLRES value="$(RESFILES)"/>
+ <ALLLIB value="$(LIBFILES) $(LIBRARIES)"/>
+ </LINKER>
+ <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\lib;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=7
+Item0=_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC
+Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC
+Item2=WIN32;_WINDOWS;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC
+Item3=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP;_DEBUG
+Item4=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP
+Item5=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP;_MBCS
+Item6=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP
+
+[HistoryLists\hlIntOutputDir]
+Count=6
+Item0=Release\obj\libexpat_static
+Item1=Release\obj\mts
+Item2=Release\obj\mt
+Item3=Release
+Item4=..\lib\Release_static
+Item5=Release_static
+
+[HistoryLists\hlFinalOutputDir]
+Count=3
+Item0=Release\
+Item1=Release
+Item2=Release_static\
+
+[HistoryLists\hlTlibPageSize]
+Count=1
+Item0=0x0010
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+ </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat-2.0.1/bcb5/expat_static.mak b/expat-2.0.1/bcb5/expat_static.mak
new file mode 100755
index 0000000..9137d3b
--- /dev/null
+++ b/expat-2.0.1/bcb5/expat_static.mak
@@ -0,0 +1,189 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\libexpats_mtd.lib
+OBJFILES = Release\obj\libexpat_static\xmlparse.obj \
+ Release\obj\libexpat_static\xmlrole.obj \
+ Release\obj\libexpat_static\xmltok.obj
+RESFILES =
+MAINSOURCE = expat_static.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES =
+IDLFILES =
+IDLGENFILES =
+LIBRARIES =
+PACKAGES =
+SPARELIBS =
+DEFFILE =
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\lib
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+LINKER = TLib
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = _WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\lib;$(BCB)\include
+LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS = -w-rch -w-par -w-8027 -w-8026 -w-ccc
+LISTFILE =
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\libexpat_static -N0Release\obj\libexpat_static -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS =
+# ---------------------------------------------------------------------------
+ALLOBJ = $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES)
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE. It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!if "$(LISTFILE)" == ""
+COMMA =
+!else
+COMMA = ,
+!endif
+
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+ $(BCB)\BIN\$(LINKER) /u $@ @&&!
+ $(LFLAGS) $? $(COMMA) $(LISTFILE)
+
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+ $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+ $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat-2.0.1/bcb5/expatw.bpf b/expat-2.0.1/bcb5/expatw.bpf
new file mode 100755
index 0000000..188a6d5
--- /dev/null
+++ b/expat-2.0.1/bcb5/expatw.bpf
@@ -0,0 +1,6 @@
+USEUNIT("..\lib\xmlparse.c");
+USEUNIT("..\lib\xmlrole.c");
+USEUNIT("..\lib\xmltok.c");
+USEDEF("libexpatw_mtd.def");
+//---------------------------------------------------------------------------
+#define DllEntryPoint
diff --git a/expat-2.0.1/bcb5/expatw.bpr b/expat-2.0.1/bcb5/expatw.bpr
new file mode 100755
index 0000000..9ec5001
--- /dev/null
+++ b/expat-2.0.1/bcb5/expatw.bpr
@@ -0,0 +1,146 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+ <MACROS>
+ <VERSION value="BCB.05.03"/>
+ <PROJECT value="Release\libexpatw_mtd.dll"/>
+ <OBJFILES value="Release\obj\libexpatw\xmlparse.obj Release\obj\libexpatw\xmlrole.obj
+ Release\obj\libexpatw\xmltok.obj"/>
+ <RESFILES value=""/>
+ <IDLFILES value=""/>
+ <IDLGENFILES value=""/>
+ <DEFFILE value="libexpatw_mtd.def"/>
+ <RESDEPEN value="$(RESFILES)"/>
+ <LIBFILES value=""/>
+ <LIBRARIES value=""/>
+ <SPARELIBS value=""/>
+ <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+ <PATHCPP value=".;..\lib"/>
+ <PATHPAS value=".;"/>
+ <PATHRC value=".;"/>
+ <PATHASM value=".;"/>
+ <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+ <RELEASELIBPATH value="$(BCB)\lib\release"/>
+ <LINKER value="ilink32"/>
+ <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T"/>
+ <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+ <MAINSOURCE value="expatw.bpf"/>
+ <INCLUDEPATH value="..\lib;$(BCB)\include"/>
+ <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/>
+ <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/>
+ </MACROS>
+ <OPTIONS>
+ <IDLCFLAGS value="-I$(BCB)\include"/>
+ <CFLAG1 value="-WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD"/>
+ <PFLAGS value="-N2Release\obj\libexpatw -N0Release\obj\libexpatw -$Y- -$L- -$D-"/>
+ <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/>
+ <AFLAGS value="/mx /w2 /zn"/>
+ <LFLAGS value="-IRelease\obj\libexpatw -D"" -aa -Tpd -x -Gn -Gi -w -q"/>
+ </OPTIONS>
+ <LINKER>
+ <ALLOBJ value="c0d32w.obj $(OBJFILES)"/>
+ <ALLRES value="$(RESFILES)"/>
+ <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+ </LINKER>
+ <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\lib;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=9
+Item0=_WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T
+Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_USRDLL;COMPILED_FROM_DSP;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T
+Item2=_WINDOWS;WIN32;NDEBUG;_DEBUG;_USRDLL;EXPAT_EXPORTS;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T
+Item3=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_USRDLL;EXPAT_EXPORTS;_DEBUG;XML_UNICODE_WCHAR_T
+Item4=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T;_DEBUG
+Item5=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_UNICODE;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T;_DEBUG
+Item6=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_UNICODE;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T
+Item7=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T;XML_UNICODE
+Item8=NDEBUG;COMPILED_FROM_DSP;WIN32;_WINDOWS;_MBCS;_USRDLL;EXPAT_EXPORTS;XML_UNICODE_WCHAR_T
+
+[HistoryLists\hlIntOutputDir]
+Count=8
+Item0=Release\obj\libexpatw
+Item1=Release\obj\libexpat
+Item2=Release\obj\mtd
+Item3=Release\obj\mt
+Item4=Release_w\obj
+Item5=Release-w\obj
+Item6=Release-w
+Item7=..\lib\Release-w
+
+[HistoryLists\hlFinalOutputDir]
+Count=5
+Item0=Release\
+Item1=Release
+Item2=Release_w\
+Item3=Release-w\
+Item4=Release-w
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+ </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat-2.0.1/bcb5/expatw.mak b/expat-2.0.1/bcb5/expatw.mak
new file mode 100755
index 0000000..08e17d0
--- /dev/null
+++ b/expat-2.0.1/bcb5/expatw.mak
@@ -0,0 +1,187 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\libexpatw_mtd.dll
+OBJFILES = Release\obj\libexpatw\xmlparse.obj Release\obj\libexpatw\xmlrole.obj \
+ Release\obj\libexpatw\xmltok.obj
+RESFILES =
+MAINSOURCE = expatw.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES =
+IDLFILES =
+IDLGENFILES =
+LIBRARIES =
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS =
+DEFFILE = libexpatw_mtd.def
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\lib
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = _WINDOWS;WIN32;NDEBUG;_USRDLL;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\lib;$(BCB)\include
+LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-rch -w-par -w-8027 -w-8026 -w-ccc
+# ---------------------------------------------------------------------------
+CFLAG1 = -WD -O2 -X- -a8 -b -k- -vi -q -tWM -c -tWD
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\libexpatw -N0Release\obj\libexpatw -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\libexpatw -D"" -aa -Tpd -x -Gn -Gi -w -q
+# ---------------------------------------------------------------------------
+ALLOBJ = c0d32w.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE. It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+ $(BCB)\BIN\$(LINKER) @&&!
+ $(LFLAGS) -L$(LIBPATH) +
+ $(ALLOBJ), +
+ $(PROJECT),, +
+ $(ALLLIB), +
+ $(DEFFILE), +
+ $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+ $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+ $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat-2.0.1/bcb5/expatw_static.bpf b/expat-2.0.1/bcb5/expatw_static.bpf
new file mode 100755
index 0000000..5ca458e
--- /dev/null
+++ b/expat-2.0.1/bcb5/expatw_static.bpf
@@ -0,0 +1,5 @@
+USEUNIT("..\lib\xmlparse.c");
+USEUNIT("..\lib\xmlrole.c");
+USEUNIT("..\lib\xmltok.c");
+//---------------------------------------------------------------------------
+#define Library
diff --git a/expat-2.0.1/bcb5/expatw_static.bpr b/expat-2.0.1/bcb5/expatw_static.bpr
new file mode 100755
index 0000000..3f12644
--- /dev/null
+++ b/expat-2.0.1/bcb5/expatw_static.bpr
@@ -0,0 +1,152 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+ <MACROS>
+ <VERSION value="BCB.05.03"/>
+ <PROJECT value="Release\libexpatws_mtd.lib"/>
+ <OBJFILES value="Release\obj\libexpatw_static\xmlparse.obj
+ Release\obj\libexpatw_static\xmlrole.obj
+ Release\obj\libexpatw_static\xmltok.obj"/>
+ <RESFILES value=""/>
+ <IDLFILES value=""/>
+ <IDLGENFILES value=""/>
+ <DEFFILE value=""/>
+ <RESDEPEN value="$(RESFILES)"/>
+ <LIBFILES value=""/>
+ <LIBRARIES value=""/>
+ <SPARELIBS value=""/>
+ <PACKAGES value=""/>
+ <PATHCPP value=".;..\lib"/>
+ <PATHPAS value=".;"/>
+ <PATHRC value=".;"/>
+ <PATHASM value=".;"/>
+ <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+ <RELEASELIBPATH value="$(BCB)\lib\release"/>
+ <LINKER value="TLib"/>
+ <USERDEFINES value="_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T"/>
+ <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+ <MAINSOURCE value="expatw_static.bpf"/>
+ <INCLUDEPATH value="..\lib;$(BCB)\include"/>
+ <LIBPATH value="..\lib;$(BCB)\lib;$(RELEASELIBPATH)"/>
+ <WARNINGS value="-w-rch -w-par -w-8027 -w-8026 -w-ccc"/>
+ <LISTFILE value=""/>
+ </MACROS>
+ <OPTIONS>
+ <IDLCFLAGS value="-I$(BCB)\include"/>
+ <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -c"/>
+ <PFLAGS value="-N2Release\obj\libexpatw_static -N0Release\obj\libexpatw_static -$Y- -$L-
+ -$D-"/>
+ <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/>
+ <AFLAGS value="/mx /w2 /zn"/>
+ <LFLAGS value=""/>
+ </OPTIONS>
+ <LINKER>
+ <ALLOBJ value="$(OBJFILES)"/>
+ <ALLRES value="$(RESFILES)"/>
+ <ALLLIB value="$(LIBFILES) $(LIBRARIES)"/>
+ </LINKER>
+ <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\lib;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\lib;$(BCB)\lib;..\lib\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=15
+Item0=_WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T
+Item1=_WINDOWS;WIN32;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T
+Item2=WIN32;_WINDOWS;NDEBUG;_DEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T
+Item3=WIN32;_WINDOWS;NDEBUG;_DEBUG;_LIB;XML_STATIC;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T
+Item4=WIN32;_WINDOWS;NDEBUG;_LIB;COMPILED_FROM_DSP;_DEBUG;XML_UNICODE_WCHAR_T
+Item5=WIN32;_WINDOWS;NDEBUG;_UNICODE;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG
+Item6=WIN32;_WINDOWS;NDEBUG;_UNICODE;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG;__cplusplus
+Item7=WIN32;_WINDOWS;NDEBUG;_UNICODE;_LIB;COMPILED_FROM_DSP;XML_UNICODE;_DEBUG
+Item8=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE;_DEBUG
+Item9=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG;__WCHAR_T
+Item10=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG;_UNICODE
+Item11=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE;_DEBUG;_UNICODE
+Item12=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;_DEBUG
+Item13=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T
+Item14=WIN32;_WINDOWS;NDEBUG;_MBCS;_LIB;COMPILED_FROM_DSP;XML_UNICODE_WCHAR_T;XML_UNICODE
+
+[HistoryLists\hlIntOutputDir]
+Count=6
+Item0=Release\obj\libexpatw_static
+Item1=Release\obj\libexpat_static
+Item2=Release\obj\mts
+Item3=Release\obj\mt
+Item4=..\lib\Release-w_static
+Item5=Release-w_static
+
+[HistoryLists\hlFinalOutputDir]
+Count=3
+Item0=Release\
+Item1=Release
+Item2=Release-w_static\
+
+[HistoryLists\hlTlibPageSize]
+Count=1
+Item0=0x0010
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+ </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat-2.0.1/bcb5/expatw_static.mak b/expat-2.0.1/bcb5/expatw_static.mak
new file mode 100755
index 0000000..16b7e5b
--- /dev/null
+++ b/expat-2.0.1/bcb5/expatw_static.mak
@@ -0,0 +1,190 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\libexpatws_mtd.lib
+OBJFILES = Release\obj\libexpatw_static\xmlparse.obj \
+ Release\obj\libexpatw_static\xmlrole.obj \
+ Release\obj\libexpatw_static\xmltok.obj
+RESFILES =
+MAINSOURCE = expatw_static.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES =
+IDLFILES =
+IDLGENFILES =
+LIBRARIES =
+PACKAGES =
+SPARELIBS =
+DEFFILE =
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\lib
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+LINKER = TLib
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = _WINDOWS;WIN32;NDEBUG;_LIB;COMPILED_FROM_DSP;XML_STATIC;XML_UNICODE_WCHAR_T
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\lib;$(BCB)\include
+LIBPATH = ..\lib;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS = -w-rch -w-par -w-8027 -w-8026 -w-ccc
+LISTFILE =
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\libexpatw_static -N0Release\obj\libexpatw_static -$Y- -$L- \
+ -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS =
+# ---------------------------------------------------------------------------
+ALLOBJ = $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES)
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE. It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = TLib
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+!if "$(LISTFILE)" == ""
+COMMA =
+!else
+COMMA = ,
+!endif
+
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+ $(BCB)\BIN\$(LINKER) /u $@ @&&!
+ $(LFLAGS) $? $(COMMA) $(LISTFILE)
+
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+ $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+ $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat-2.0.1/bcb5/libexpat_mtd.def b/expat-2.0.1/bcb5/libexpat_mtd.def
new file mode 100755
index 0000000..fc1cb95
--- /dev/null
+++ b/expat-2.0.1/bcb5/libexpat_mtd.def
@@ -0,0 +1,141 @@
+; DEF file for BCB5
+LIBRARY LIBEXPAT_MTD
+DESCRIPTION "Implements an XML parser."
+EXPORTS
+ _XML_DefaultCurrent @1
+ _XML_ErrorString @2
+ _XML_ExpatVersion @3
+ _XML_ExpatVersionInfo @4
+ _XML_ExternalEntityParserCreate @5
+ _XML_GetBase @6
+ _XML_GetBuffer @7
+ _XML_GetCurrentByteCount @8
+ _XML_GetCurrentByteIndex @9
+ _XML_GetCurrentColumnNumber @10
+ _XML_GetCurrentLineNumber @11
+ _XML_GetErrorCode @12
+ _XML_GetIdAttributeIndex @13
+ _XML_GetInputContext @14
+ _XML_GetSpecifiedAttributeCount @15
+ _XML_Parse @16
+ _XML_ParseBuffer @17
+ _XML_ParserCreate @18
+ _XML_ParserCreateNS @19
+ _XML_ParserCreate_MM @20
+ _XML_ParserFree @21
+ _XML_SetAttlistDeclHandler @22
+ _XML_SetBase @23
+ _XML_SetCdataSectionHandler @24
+ _XML_SetCharacterDataHandler @25
+ _XML_SetCommentHandler @26
+ _XML_SetDefaultHandler @27
+ _XML_SetDefaultHandlerExpand @28
+ _XML_SetDoctypeDeclHandler @29
+ _XML_SetElementDeclHandler @30
+ _XML_SetElementHandler @31
+ _XML_SetEncoding @32
+ _XML_SetEndCdataSectionHandler @33
+ _XML_SetEndDoctypeDeclHandler @34
+ _XML_SetEndElementHandler @35
+ _XML_SetEndNamespaceDeclHandler @36
+ _XML_SetEntityDeclHandler @37
+ _XML_SetExternalEntityRefHandler @38
+ _XML_SetExternalEntityRefHandlerArg @39
+ _XML_SetNamespaceDeclHandler @40
+ _XML_SetNotStandaloneHandler @41
+ _XML_SetNotationDeclHandler @42
+ _XML_SetParamEntityParsing @43
+ _XML_SetProcessingInstructionHandler @44
+ _XML_SetReturnNSTriplet @45
+ _XML_SetStartCdataSectionHandler @46
+ _XML_SetStartDoctypeDeclHandler @47
+ _XML_SetStartElementHandler @48
+ _XML_SetStartNamespaceDeclHandler @49
+ _XML_SetUnknownEncodingHandler @50
+ _XML_SetUnparsedEntityDeclHandler @51
+ _XML_SetUserData @52
+ _XML_SetXmlDeclHandler @53
+ _XML_UseParserAsHandlerArg @54
+; added with version 1.95.3
+ _XML_ParserReset @55
+ _XML_SetSkippedEntityHandler @56
+; added with version 1.95.5
+ _XML_GetFeatureList @57
+ _XML_UseForeignDTD @58
+; added with version 1.95.6
+ _XML_FreeContentModel @59
+ _XML_MemMalloc @60
+ _XML_MemRealloc @61
+ _XML_MemFree @62
+; added with version 1.95.8
+ _XML_StopParser @63
+ _XML_ResumeParser @64
+ _XML_GetParsingStatus @65
+
+; Aliases for MS compatible names
+ XML_DefaultCurrent = _XML_DefaultCurrent
+ XML_ErrorString = _XML_ErrorString
+ XML_ExpatVersion = _XML_ExpatVersion
+ XML_ExpatVersionInfo = _XML_ExpatVersionInfo
+ XML_ExternalEntityParserCreate = _XML_ExternalEntityParserCreate
+ XML_GetBase = _XML_GetBase
+ XML_GetBuffer = _XML_GetBuffer
+ XML_GetCurrentByteCount = _XML_GetCurrentByteCount
+ XML_GetCurrentByteIndex = _XML_GetCurrentByteIndex
+ XML_GetCurrentColumnNumber = _XML_GetCurrentColumnNumber
+ XML_GetCurrentLineNumber = _XML_GetCurrentLineNumber
+ XML_GetErrorCode = _XML_GetErrorCode
+ XML_GetIdAttributeIndex = _XML_GetIdAttributeIndex
+ XML_GetInputContext = _XML_GetInputContext
+ XML_GetSpecifiedAttributeCount = _XML_GetSpecifiedAttributeCount
+ XML_Parse = _XML_Parse
+ XML_ParseBuffer = _XML_ParseBuffer
+ XML_ParserCreate = _XML_ParserCreate
+ XML_ParserCreateNS = _XML_ParserCreateNS
+ XML_ParserCreate_MM = _XML_ParserCreate_MM
+ XML_ParserFree = _XML_ParserFree
+ XML_SetAttlistDeclHandler = _XML_SetAttlistDeclHandler
+ XML_SetBase = _XML_SetBase
+ XML_SetCdataSectionHandler = _XML_SetCdataSectionHandler
+ XML_SetCharacterDataHandler = _XML_SetCharacterDataHandler
+ XML_SetCommentHandler = _XML_SetCommentHandler
+ XML_SetDefaultHandler = _XML_SetDefaultHandler
+ XML_SetDefaultHandlerExpand = _XML_SetDefaultHandlerExpand
+ XML_SetDoctypeDeclHandler = _XML_SetDoctypeDeclHandler
+ XML_SetElementDeclHandler = _XML_SetElementDeclHandler
+ XML_SetElementHandler = _XML_SetElementHandler
+ XML_SetEncoding = _XML_SetEncoding
+ XML_SetEndCdataSectionHandler = _XML_SetEndCdataSectionHandler
+ XML_SetEndDoctypeDeclHandler = _XML_SetEndDoctypeDeclHandler
+ XML_SetEndElementHandler = _XML_SetEndElementHandler
+ XML_SetEndNamespaceDeclHandler = _XML_SetEndNamespaceDeclHandler
+ XML_SetEntityDeclHandler = _XML_SetEntityDeclHandler
+ XML_SetExternalEntityRefHandler = _XML_SetExternalEntityRefHandler
+ XML_SetExternalEntityRefHandlerArg = _XML_SetExternalEntityRefHandlerArg
+ XML_SetNamespaceDeclHandler = _XML_SetNamespaceDeclHandler
+ XML_SetNotStandaloneHandler = _XML_SetNotStandaloneHandler
+ XML_SetNotationDeclHandler = _XML_SetNotationDeclHandler
+ XML_SetParamEntityParsing = _XML_SetParamEntityParsing
+ XML_SetProcessingInstructionHandler = _XML_SetProcessingInstructionHandler
+ XML_SetReturnNSTriplet = _XML_SetReturnNSTriplet
+ XML_SetStartCdataSectionHandler = _XML_SetStartCdataSectionHandler
+ XML_SetStartDoctypeDeclHandler = _XML_SetStartDoctypeDeclHandler
+ XML_SetStartElementHandler = _XML_SetStartElementHandler
+ XML_SetStartNamespaceDeclHandler = _XML_SetStartNamespaceDeclHandler
+ XML_SetUnknownEncodingHandler = _XML_SetUnknownEncodingHandler
+ XML_SetUnparsedEntityDeclHandler = _XML_SetUnparsedEntityDeclHandler
+ XML_SetUserData = _XML_SetUserData
+ XML_SetXmlDeclHandler = _XML_SetXmlDeclHandler
+ XML_UseParserAsHandlerArg = _XML_UseParserAsHandlerArg
+ XML_ParserReset = _XML_ParserReset
+ XML_SetSkippedEntityHandler = _XML_SetSkippedEntityHandler
+ XML_GetFeatureList = _XML_GetFeatureList
+ XML_UseForeignDTD = _XML_UseForeignDTD
+ XML_FreeContentModel = _XML_FreeContentModel
+ XML_MemMalloc = _XML_MemMalloc
+ XML_MemRealloc = _XML_MemRealloc
+ XML_MemFree = _XML_MemFree
+ XML_StopParser = _XML_StopParser
+ XML_ResumeParser = _XML_ResumeParser
+ XML_GetParsingStatus = _XML_GetParsingStatus
+
diff --git a/expat-2.0.1/bcb5/libexpatw_mtd.def b/expat-2.0.1/bcb5/libexpatw_mtd.def
new file mode 100755
index 0000000..418462d
--- /dev/null
+++ b/expat-2.0.1/bcb5/libexpatw_mtd.def
@@ -0,0 +1,140 @@
+; DEF file for BCB5
+LIBRARY LIBEXPATW_MTD
+DESCRIPTION "Implements an XML parser."
+EXPORTS
+ _XML_DefaultCurrent @1
+ _XML_ErrorString @2
+ _XML_ExpatVersion @3
+ _XML_ExpatVersionInfo @4
+ _XML_ExternalEntityParserCreate @5
+ _XML_GetBase @6
+ _XML_GetBuffer @7
+ _XML_GetCurrentByteCount @8
+ _XML_GetCurrentByteIndex @9
+ _XML_GetCurrentColumnNumber @10
+ _XML_GetCurrentLineNumber @11
+ _XML_GetErrorCode @12
+ _XML_GetIdAttributeIndex @13
+ _XML_GetInputContext @14
+ _XML_GetSpecifiedAttributeCount @15
+ _XML_Parse @16
+ _XML_ParseBuffer @17
+ _XML_ParserCreate @18
+ _XML_ParserCreateNS @19
+ _XML_ParserCreate_MM @20
+ _XML_ParserFree @21
+ _XML_SetAttlistDeclHandler @22
+ _XML_SetBase @23
+ _XML_SetCdataSectionHandler @24
+ _XML_SetCharacterDataHandler @25
+ _XML_SetCommentHandler @26
+ _XML_SetDefaultHandler @27
+ _XML_SetDefaultHandlerExpand @28
+ _XML_SetDoctypeDeclHandler @29
+ _XML_SetElementDeclHandler @30
+ _XML_SetElementHandler @31
+ _XML_SetEncoding @32
+ _XML_SetEndCdataSectionHandler @33
+ _XML_SetEndDoctypeDeclHandler @34
+ _XML_SetEndElementHandler @35
+ _XML_SetEndNamespaceDeclHandler @36
+ _XML_SetEntityDeclHandler @37
+ _XML_SetExternalEntityRefHandler @38
+ _XML_SetExternalEntityRefHandlerArg @39
+ _XML_SetNamespaceDeclHandler @40
+ _XML_SetNotStandaloneHandler @41
+ _XML_SetNotationDeclHandler @42
+ _XML_SetParamEntityParsing @43
+ _XML_SetProcessingInstructionHandler @44
+ _XML_SetReturnNSTriplet @45
+ _XML_SetStartCdataSectionHandler @46
+ _XML_SetStartDoctypeDeclHandler @47
+ _XML_SetStartElementHandler @48
+ _XML_SetStartNamespaceDeclHandler @49
+ _XML_SetUnknownEncodingHandler @50
+ _XML_SetUnparsedEntityDeclHandler @51
+ _XML_SetUserData @52
+ _XML_SetXmlDeclHandler @53
+ _XML_UseParserAsHandlerArg @54
+; added with version 1.95.3
+ _XML_ParserReset @55
+ _XML_SetSkippedEntityHandler @56
+; added with version 1.95.5
+ _XML_GetFeatureList @57
+ _XML_UseForeignDTD @58
+; added with version 1.95.6
+ _XML_FreeContentModel @59
+ _XML_MemMalloc @60
+ _XML_MemRealloc @61
+ _XML_MemFree @62
+; added with version 1.95.8
+ _XML_StopParser @63
+ _XML_ResumeParser @64
+ _XML_GetParsingStatus @65
+
+; Aliases for MS compatible names
+ XML_DefaultCurrent = _XML_DefaultCurrent
+ XML_ErrorString = _XML_ErrorString
+ XML_ExpatVersion = _XML_ExpatVersion
+ XML_ExpatVersionInfo = _XML_ExpatVersionInfo
+ XML_ExternalEntityParserCreate = _XML_ExternalEntityParserCreate
+ XML_GetBase = _XML_GetBase
+ XML_GetBuffer = _XML_GetBuffer
+ XML_GetCurrentByteCount = _XML_GetCurrentByteCount
+ XML_GetCurrentByteIndex = _XML_GetCurrentByteIndex
+ XML_GetCurrentColumnNumber = _XML_GetCurrentColumnNumber
+ XML_GetCurrentLineNumber = _XML_GetCurrentLineNumber
+ XML_GetErrorCode = _XML_GetErrorCode
+ XML_GetIdAttributeIndex = _XML_GetIdAttributeIndex
+ XML_GetInputContext = _XML_GetInputContext
+ XML_GetSpecifiedAttributeCount = _XML_GetSpecifiedAttributeCount
+ XML_Parse = _XML_Parse
+ XML_ParseBuffer = _XML_ParseBuffer
+ XML_ParserCreate = _XML_ParserCreate
+ XML_ParserCreateNS = _XML_ParserCreateNS
+ XML_ParserCreate_MM = _XML_ParserCreate_MM
+ XML_ParserFree = _XML_ParserFree
+ XML_SetAttlistDeclHandler = _XML_SetAttlistDeclHandler
+ XML_SetBase = _XML_SetBase
+ XML_SetCdataSectionHandler = _XML_SetCdataSectionHandler
+ XML_SetCharacterDataHandler = _XML_SetCharacterDataHandler
+ XML_SetCommentHandler = _XML_SetCommentHandler
+ XML_SetDefaultHandler = _XML_SetDefaultHandler
+ XML_SetDefaultHandlerExpand = _XML_SetDefaultHandlerExpand
+ XML_SetDoctypeDeclHandler = _XML_SetDoctypeDeclHandler
+ XML_SetElementDeclHandler = _XML_SetElementDeclHandler
+ XML_SetElementHandler = _XML_SetElementHandler
+ XML_SetEncoding = _XML_SetEncoding
+ XML_SetEndCdataSectionHandler = _XML_SetEndCdataSectionHandler
+ XML_SetEndDoctypeDeclHandler = _XML_SetEndDoctypeDeclHandler
+ XML_SetEndElementHandler = _XML_SetEndElementHandler
+ XML_SetEndNamespaceDeclHandler = _XML_SetEndNamespaceDeclHandler
+ XML_SetEntityDeclHandler = _XML_SetEntityDeclHandler
+ XML_SetExternalEntityRefHandler = _XML_SetExternalEntityRefHandler
+ XML_SetExternalEntityRefHandlerArg = _XML_SetExternalEntityRefHandlerArg
+ XML_SetNamespaceDeclHandler = _XML_SetNamespaceDeclHandler
+ XML_SetNotStandaloneHandler = _XML_SetNotStandaloneHandler
+ XML_SetNotationDeclHandler = _XML_SetNotationDeclHandler
+ XML_SetParamEntityParsing = _XML_SetParamEntityParsing
+ XML_SetProcessingInstructionHandler = _XML_SetProcessingInstructionHandler
+ XML_SetReturnNSTriplet = _XML_SetReturnNSTriplet
+ XML_SetStartCdataSectionHandler = _XML_SetStartCdataSectionHandler
+ XML_SetStartDoctypeDeclHandler = _XML_SetStartDoctypeDeclHandler
+ XML_SetStartElementHandler = _XML_SetStartElementHandler
+ XML_SetStartNamespaceDeclHandler = _XML_SetStartNamespaceDeclHandler
+ XML_SetUnknownEncodingHandler = _XML_SetUnknownEncodingHandler
+ XML_SetUnparsedEntityDeclHandler = _XML_SetUnparsedEntityDeclHandler
+ XML_SetUserData = _XML_SetUserData
+ XML_SetXmlDeclHandler = _XML_SetXmlDeclHandler
+ XML_UseParserAsHandlerArg = _XML_UseParserAsHandlerArg
+ XML_ParserReset = _XML_ParserReset
+ XML_SetSkippedEntityHandler = _XML_SetSkippedEntityHandler
+ XML_GetFeatureList = _XML_GetFeatureList
+ XML_UseForeignDTD = _XML_UseForeignDTD
+ XML_FreeContentModel = _XML_FreeContentModel
+ XML_MemMalloc = _XML_MemMalloc
+ XML_MemRealloc = _XML_MemRealloc
+ XML_MemFree = _XML_MemFree
+ XML_StopParser = _XML_StopParser
+ XML_ResumeParser = _XML_ResumeParser
+ XML_GetParsingStatus = _XML_GetParsingStatus
diff --git a/expat-2.0.1/bcb5/makefile.mak b/expat-2.0.1/bcb5/makefile.mak
new file mode 100755
index 0000000..548815e
--- /dev/null
+++ b/expat-2.0.1/bcb5/makefile.mak
@@ -0,0 +1,37 @@
+all: setup expat expatw expat_static expatw_static elements outline xmlwf
+
+setup:
+ setup
+
+expat:
+ make -l -fexpat.mak
+
+expatw:
+ make -l -fexpatw.mak
+
+expat_static:
+ make -l -fexpat_static.mak
+
+expatw_static:
+ make -l -fexpatw_static.mak
+
+elements:
+ make -l -felements.mak
+
+outline:
+ make -l -foutline.mak
+
+xmlwf:
+ make -l -fxmlwf.mak
+
+clean:
+# works on Win98/ME
+# deltree /y release\obj
+# works on WinNT/2000
+ del /s/f/q release\obj
+
+distclean:
+# works on Win98/ME
+# deltree /y release\*.*
+# works on WinNT/2000
+ del /s/f/q release\*
diff --git a/expat-2.0.1/bcb5/outline.bpf b/expat-2.0.1/bcb5/outline.bpf
new file mode 100755
index 0000000..52dce83
--- /dev/null
+++ b/expat-2.0.1/bcb5/outline.bpf
@@ -0,0 +1,4 @@
+USEUNIT("..\examples\outline.c");
+USELIB("Release\libexpat_mtd.lib");
+//---------------------------------------------------------------------------
+main
diff --git a/expat-2.0.1/bcb5/outline.bpr b/expat-2.0.1/bcb5/outline.bpr
new file mode 100755
index 0000000..e0ae5cd
--- /dev/null
+++ b/expat-2.0.1/bcb5/outline.bpr
@@ -0,0 +1,132 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+ <MACROS>
+ <VERSION value="BCB.05.03"/>
+ <PROJECT value="Release\outline.exe"/>
+ <OBJFILES value="Release\obj\examples\outline.obj"/>
+ <RESFILES value=""/>
+ <IDLFILES value=""/>
+ <IDLGENFILES value=""/>
+ <DEFFILE value=""/>
+ <RESDEPEN value="$(RESFILES)"/>
+ <LIBFILES value="Release\libexpat_mtd.lib"/>
+ <LIBRARIES value=""/>
+ <SPARELIBS value=""/>
+ <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+ <PATHCPP value=".;..\examples"/>
+ <PATHPAS value=".;"/>
+ <PATHRC value=".;"/>
+ <PATHASM value=".;"/>
+ <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+ <RELEASELIBPATH value="$(BCB)\lib\release"/>
+ <LINKER value="ilink32"/>
+ <USERDEFINES value="WIN32;NDEBUG;_CONSOLE"/>
+ <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+ <MAINSOURCE value="outline.bpf"/>
+ <INCLUDEPATH value="..\examples;$(BCB)\include"/>
+ <LIBPATH value="..\examples;$(BCB)\lib;$(RELEASELIBPATH)"/>
+ <WARNINGS value="-w-par -w-8027 -w-8026"/>
+ </MACROS>
+ <OPTIONS>
+ <IDLCFLAGS value="-I$(BCB)\include"/>
+ <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c"/>
+ <PFLAGS value="-N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-"/>
+ <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/>
+ <AFLAGS value="/mx /w2 /zn"/>
+ <LFLAGS value="-IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q"/>
+ </OPTIONS>
+ <LINKER>
+ <ALLOBJ value="c0x32.obj $(OBJFILES)"/>
+ <ALLRES value="$(RESFILES)"/>
+ <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+ </LINKER>
+ <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=3
+Item0=..\examples;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=4
+Item0=..\examples;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\examples;$(BCB)\lib;..\examples\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=6
+Item0=WIN32;NDEBUG;_CONSOLE
+Item1=WIN32;NDEBUG;_CONSOLE;XML_STATIC
+Item2=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_STATIC
+Item3=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE;XML_STATIC
+Item4=WIN32;NDEBUG;_CONSOLE;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE
+Item5=WIN32;NDEBUG;_CONSOLE;_DEBUG
+
+[HistoryLists\hlIntOutputDir]
+Count=4
+Item0=Release\obj\examples
+Item1=Release\obj\outline
+Item2=..\examples\Release
+Item3=Release
+
+[HistoryLists\hlFinalOutputDir]
+Count=1
+Item0=Release\
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+ </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat-2.0.1/bcb5/outline.mak b/expat-2.0.1/bcb5/outline.mak
new file mode 100755
index 0000000..510b541
--- /dev/null
+++ b/expat-2.0.1/bcb5/outline.mak
@@ -0,0 +1,186 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\outline.exe
+OBJFILES = Release\obj\examples\outline.obj
+RESFILES =
+MAINSOURCE = outline.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = Release\libexpat_mtd.lib
+IDLFILES =
+IDLGENFILES =
+LIBRARIES =
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS =
+DEFFILE =
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\examples
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = WIN32;NDEBUG;_CONSOLE
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\examples;$(BCB)\include
+LIBPATH = ..\examples;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-par -w-8027 -w-8026
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\examples -N0Release\obj\examples -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\examples -D"" -ap -Tpe -x -Gn -q
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE. It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+ $(BCB)\BIN\$(LINKER) @&&!
+ $(LFLAGS) -L$(LIBPATH) +
+ $(ALLOBJ), +
+ $(PROJECT),, +
+ $(ALLLIB), +
+ $(DEFFILE), +
+ $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+ $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+ $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat-2.0.1/bcb5/setup.bat b/expat-2.0.1/bcb5/setup.bat
new file mode 100755
index 0000000..6f4b573
--- /dev/null
+++ b/expat-2.0.1/bcb5/setup.bat
@@ -0,0 +1,9 @@
+REM CommandInterpreter: $(COMSPEC)
+if not exist .\release\nul mkdir release
+if not exist .\release\obj\nul mkdir release\obj
+if not exist .\release\obj\libexpat\nul mkdir release\obj\libexpat
+if not exist .\release\obj\libexpatw\nul mkdir release\obj\libexpatw
+if not exist .\release\obj\libexpat_static\nul mkdir release\obj\libexpat_static
+if not exist .\release\obj\libexpatw_static\nul mkdir release\obj\libexpatw_static
+if not exist .\release\obj\examples\nul mkdir release\obj\examples
+if not exist .\release\obj\xmlwf\nul mkdir release\obj\xmlwf
diff --git a/expat-2.0.1/bcb5/xmlwf.bpf b/expat-2.0.1/bcb5/xmlwf.bpf
new file mode 100755
index 0000000..d06208e
--- /dev/null
+++ b/expat-2.0.1/bcb5/xmlwf.bpf
@@ -0,0 +1,7 @@
+USEUNIT("..\xmlwf\codepage.c");
+USEUNIT("..\xmlwf\win32filemap.c");
+USEUNIT("..\xmlwf\xmlfile.c");
+USEUNIT("..\xmlwf\xmlwf.c");
+USELIB("Release\libexpat_mtd.lib");
+//---------------------------------------------------------------------------
+main
diff --git a/expat-2.0.1/bcb5/xmlwf.bpr b/expat-2.0.1/bcb5/xmlwf.bpr
new file mode 100755
index 0000000..d33a153
--- /dev/null
+++ b/expat-2.0.1/bcb5/xmlwf.bpr
@@ -0,0 +1,136 @@
+<?xml version='1.0' encoding='utf-8' ?>
+<!-- C++Builder XML Project -->
+<PROJECT>
+ <MACROS>
+ <VERSION value="BCB.05.03"/>
+ <PROJECT value="Release\xmlwf.exe"/>
+ <OBJFILES value="Release\obj\xmlwf\codepage.obj Release\obj\xmlwf\win32filemap.obj
+ Release\obj\xmlwf\xmlfile.obj Release\obj\xmlwf\xmlwf.obj"/>
+ <RESFILES value=""/>
+ <IDLFILES value=""/>
+ <IDLGENFILES value=""/>
+ <DEFFILE value=""/>
+ <RESDEPEN value="$(RESFILES)"/>
+ <LIBFILES value="Release\libexpat_mtd.lib"/>
+ <LIBRARIES value=""/>
+ <SPARELIBS value=""/>
+ <PACKAGES value="VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi"/>
+ <PATHCPP value=".;..\xmlwf"/>
+ <PATHPAS value=".;"/>
+ <PATHRC value=".;"/>
+ <PATHASM value=".;"/>
+ <DEBUGLIBPATH value="$(BCB)\lib\debug"/>
+ <RELEASELIBPATH value="$(BCB)\lib\release"/>
+ <LINKER value="ilink32"/>
+ <USERDEFINES value="NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP"/>
+ <SYSDEFINES value="_NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL"/>
+ <MAINSOURCE value="xmlwf.bpf"/>
+ <INCLUDEPATH value="..\xmlwf;$(BCB)\include"/>
+ <LIBPATH value="..\xmlwf;$(BCB)\lib;$(RELEASELIBPATH)"/>
+ <WARNINGS value="-w-8065 -w-par -w-8027 -w-8026"/>
+ </MACROS>
+ <OPTIONS>
+ <IDLCFLAGS value="-I$(BCB)\include"/>
+ <CFLAG1 value="-O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c"/>
+ <PFLAGS value="-N2Release\obj\xmlwf -N0Release\obj\xmlwf -$Y- -$L- -$D-"/>
+ <RFLAGS value="/l 0x409 /d "NDEBUG" /i$(BCB)\include"/>
+ <AFLAGS value="/mx /w2 /zn"/>
+ <LFLAGS value="-IRelease\obj\xmlwf -D"" -ap -Tpe -x -Gn -q"/>
+ </OPTIONS>
+ <LINKER>
+ <ALLOBJ value="c0x32.obj $(OBJFILES)"/>
+ <ALLRES value="$(RESFILES)"/>
+ <ALLLIB value="$(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib"/>
+ </LINKER>
+ <IDEOPTIONS>
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+Locale=1033
+CodePage=1252
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[HistoryLists\hlIncludePath]
+Count=4
+Item0=..\xmlwf;$(BCB)\include
+Item1=$(BCB)\include
+Item2=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl
+Item3=$(BCB)\include;$(BCB)\include\mfc;$(BCB)\include\atl;
+
+[HistoryLists\hlLibraryPath]
+Count=5
+Item0=..\xmlwf;$(BCB)\lib;$(RELEASELIBPATH)
+Item1=..\xmlwf;$(BCB)\lib;..\xmlwf\$(RELEASELIBPATH)
+Item2=$(BCB)\lib;$(RELEASELIBPATH)
+Item3=$(BCB)\lib;$(RELEASELIBPATH);$(BCB)\lib\psdk
+Item4=$(BCB)\lib;$(RELEASELIBPATH);;$(BCB)\lib\psdk;
+
+[HistoryLists\hlDebugSourcePath]
+Count=1
+Item0=$(BCB)\source\vcl
+
+[HistoryLists\hlConditionals]
+Count=6
+Item0=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP
+Item1=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;XML_UNICODE_WCHAR_T;_UNICODE
+Item2=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;XML_UNICODE_WCHAR_T
+Item3=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG
+Item4=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;_UNICODE;XML_UNICODE_WCHAR_T
+Item5=NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP;_DEBUG;_UNICODE
+
+[HistoryLists\hlIntOutputDir]
+Count=3
+Item0=Release\obj\xmlwf
+Item1=..\xmlwf\Release
+Item2=Release
+
+[HistoryLists\hlFinalOutputDir]
+Count=3
+Item0=Release\
+Item1=Release
+Item2=.\Release\
+
+[Debugging]
+DebugSourceDirs=
+
+[Parameters]
+RunParams=sample.xml
+HostApplication=
+RemoteHost=
+RemotePath=
+RemoteDebug=0
+
+[Compiler]
+ShowInfoMsgs=0
+LinkDebugVcl=0
+LinkCGLIB=0
+
+[Language]
+ActiveLang=
+ProjectLang=
+RootDir=
+ </IDEOPTIONS>
+</PROJECT>
\ No newline at end of file
diff --git a/expat-2.0.1/bcb5/xmlwf.mak b/expat-2.0.1/bcb5/xmlwf.mak
new file mode 100755
index 0000000..f74126e
--- /dev/null
+++ b/expat-2.0.1/bcb5/xmlwf.mak
@@ -0,0 +1,187 @@
+# ---------------------------------------------------------------------------
+!if !$d(BCB)
+BCB = $(MAKEDIR)\..
+!endif
+
+# ---------------------------------------------------------------------------
+# IDE SECTION
+# ---------------------------------------------------------------------------
+# The following section of the project makefile is managed by the BCB IDE.
+# It is recommended to use the IDE to change any of the values in this
+# section.
+# ---------------------------------------------------------------------------
+
+VERSION = BCB.05.03
+# ---------------------------------------------------------------------------
+PROJECT = Release\xmlwf.exe
+OBJFILES = Release\obj\xmlwf\codepage.obj Release\obj\xmlwf\win32filemap.obj \
+ Release\obj\xmlwf\xmlfile.obj Release\obj\xmlwf\xmlwf.obj
+RESFILES =
+MAINSOURCE = xmlwf.bpf
+RESDEPEN = $(RESFILES)
+LIBFILES = Release\libexpat_mtd.lib
+IDLFILES =
+IDLGENFILES =
+LIBRARIES =
+PACKAGES = VCL50.bpi VCLX50.bpi bcbsmp50.bpi QRPT50.bpi VCLDB50.bpi VCLBDE50.bpi \
+ ibsmp50.bpi VCLDBX50.bpi TEEUI50.bpi TEEDB50.bpi TEE50.bpi TEEQR50.bpi \
+ VCLIB50.bpi bcbie50.bpi VCLIE50.bpi INETDB50.bpi INET50.bpi NMFAST50.bpi \
+ dclocx50.bpi bcb2kaxserver50.bpi dclusr50.bpi
+SPARELIBS =
+DEFFILE =
+# ---------------------------------------------------------------------------
+PATHCPP = .;..\xmlwf
+PATHASM = .;
+PATHPAS = .;
+PATHRC = .;
+DEBUGLIBPATH = $(BCB)\lib\debug
+RELEASELIBPATH = $(BCB)\lib\release
+USERDEFINES = NDEBUG;WIN32;_CONSOLE;COMPILED_FROM_DSP
+SYSDEFINES = _NO_VCL;_ASSERTE;NO_STRICT;_RTLDLL
+INCLUDEPATH = ..\xmlwf;$(BCB)\include
+LIBPATH = ..\xmlwf;$(BCB)\lib;$(RELEASELIBPATH)
+WARNINGS= -w-8065 -w-par -w-8027 -w-8026
+# ---------------------------------------------------------------------------
+CFLAG1 = -O2 -X- -a8 -b -k- -vi -q -tWM -I..\lib -c
+IDLCFLAGS = -I$(BCB)\include
+PFLAGS = -N2Release\obj\xmlwf -N0Release\obj\xmlwf -$Y- -$L- -$D-
+RFLAGS = /l 0x409 /d "NDEBUG" /i$(BCB)\include
+AFLAGS = /mx /w2 /zn
+LFLAGS = -IRelease\obj\xmlwf -D"" -ap -Tpe -x -Gn -q
+# ---------------------------------------------------------------------------
+ALLOBJ = c0x32.obj $(OBJFILES)
+ALLRES = $(RESFILES)
+ALLLIB = $(LIBFILES) $(LIBRARIES) import32.lib cw32mti.lib
+# ---------------------------------------------------------------------------
+!ifdef IDEOPTIONS
+
+[Version Info]
+IncludeVerInfo=0
+AutoIncBuild=0
+MajorVer=1
+MinorVer=0
+Release=0
+Build=0
+Debug=0
+PreRelease=0
+Special=0
+Private=0
+DLL=0
+
+[Version Info Keys]
+CompanyName=
+FileDescription=
+FileVersion=1.0.0.0
+InternalName=
+LegalCopyright=
+LegalTrademarks=
+OriginalFilename=
+ProductName=
+ProductVersion=1.0.0.0
+Comments=
+
+[Debugging]
+DebugSourceDirs=$(BCB)\source\vcl
+
+!endif
+
+
+
+
+
+# ---------------------------------------------------------------------------
+# MAKE SECTION
+# ---------------------------------------------------------------------------
+# This section of the project file is not used by the BCB IDE. It is for
+# the benefit of building from the command-line using the MAKE utility.
+# ---------------------------------------------------------------------------
+
+.autodepend
+# ---------------------------------------------------------------------------
+!if "$(USERDEFINES)" != ""
+AUSERDEFINES = -d$(USERDEFINES:;= -d)
+!else
+AUSERDEFINES =
+!endif
+
+!if !$d(BCC32)
+BCC32 = bcc32
+!endif
+
+!if !$d(CPP32)
+CPP32 = cpp32
+!endif
+
+!if !$d(DCC32)
+DCC32 = dcc32
+!endif
+
+!if !$d(TASM32)
+TASM32 = tasm32
+!endif
+
+!if !$d(LINKER)
+LINKER = ilink32
+!endif
+
+!if !$d(BRCC32)
+BRCC32 = brcc32
+!endif
+
+
+# ---------------------------------------------------------------------------
+!if $d(PATHCPP)
+.PATH.CPP = $(PATHCPP)
+.PATH.C = $(PATHCPP)
+!endif
+
+!if $d(PATHPAS)
+.PATH.PAS = $(PATHPAS)
+!endif
+
+!if $d(PATHASM)
+.PATH.ASM = $(PATHASM)
+!endif
+
+!if $d(PATHRC)
+.PATH.RC = $(PATHRC)
+!endif
+# ---------------------------------------------------------------------------
+$(PROJECT): $(IDLGENFILES) $(OBJFILES) $(RESDEPEN) $(DEFFILE)
+ $(BCB)\BIN\$(LINKER) @&&!
+ $(LFLAGS) -L$(LIBPATH) +
+ $(ALLOBJ), +
+ $(PROJECT),, +
+ $(ALLLIB), +
+ $(DEFFILE), +
+ $(ALLRES)
+!
+# ---------------------------------------------------------------------------
+.pas.hpp:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.pas.obj:
+ $(BCB)\BIN\$(DCC32) $(PFLAGS) -U$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -O$(INCLUDEPATH) --BCB {$< }
+
+.cpp.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.obj:
+ $(BCB)\BIN\$(BCC32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n$(@D) {$< }
+
+.c.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.cpp.i:
+ $(BCB)\BIN\$(CPP32) $(CFLAG1) $(WARNINGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -n. {$< }
+
+.asm.obj:
+ $(BCB)\BIN\$(TASM32) $(AFLAGS) -i$(INCLUDEPATH:;= -i) $(AUSERDEFINES) -d$(SYSDEFINES:;= -d) $<, $@
+
+.rc.res:
+ $(BCB)\BIN\$(BRCC32) $(RFLAGS) -I$(INCLUDEPATH) -D$(USERDEFINES);$(SYSDEFINES) -fo$@ $<
+# ---------------------------------------------------------------------------
+
+
+
+
diff --git a/expat-2.0.1/configure b/expat-2.0.1/configure
new file mode 100755
index 0000000..01ba7a9
--- /dev/null
+++ b/expat-2.0.1/configure
@@ -0,0 +1,22017 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59 for expat 2.0.1.
+#
+# Report bugs to <expat-bugs@libexpat.org>.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+case X$ECHO in
+X*--fallback-echo)
+ # Remove one level of quotation (which was required for Make).
+ ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+ ;;
+esac
+
+echo=${ECHO-echo}
+if test "X$1" = X--no-reexec; then
+ # Discard the --no-reexec flag, and continue.
+ shift
+elif test "X$1" = X--fallback-echo; then
+ # Avoid inline document here, it may be left over
+ :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+ # Yippee, $echo works!
+ :
+else
+ # Restart under the correct shell.
+ exec $SHELL "$0" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+ # used as fallback echo
+ shift
+ cat <<EOF
+$*
+EOF
+ exit 0
+fi
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+ for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+ # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+ if (echo_test_string=`eval $cmd`) 2>/dev/null &&
+ echo_test_string=`eval $cmd` &&
+ (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+ then
+ break
+ fi
+ done
+fi
+
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ :
+else
+ # The Solaris, AIX, and Digital Unix default echo programs unquote
+ # backslashes. This makes it impossible to quote backslashes using
+ # echo "$something" | sed 's/\\/\\\\/g'
+ #
+ # So, first we look for a working echo in the user's PATH.
+
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for dir in $PATH /usr/ucb; do
+ IFS="$lt_save_ifs"
+ if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+ test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$dir/echo"
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+
+ if test "X$echo" = Xecho; then
+ # We didn't find a better echo, so look for alternatives.
+ if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # This shell has a builtin print -r that does the trick.
+ echo='print -r'
+ elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+ test "X$CONFIG_SHELL" != X/bin/ksh; then
+ # If we have ksh, try running configure again with it.
+ ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+ export ORIGINAL_CONFIG_SHELL
+ CONFIG_SHELL=/bin/ksh
+ export CONFIG_SHELL
+ exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+ else
+ # Try using printf.
+ echo='printf %s\n'
+ if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+ echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ # Cool, printf works
+ :
+ elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+ export CONFIG_SHELL
+ SHELL="$CONFIG_SHELL"
+ export SHELL
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+ test "X$echo_testing_string" = 'X\t' &&
+ echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+ test "X$echo_testing_string" = "X$echo_test_string"; then
+ echo="$CONFIG_SHELL $0 --fallback-echo"
+ else
+ # maybe with a smaller string...
+ prev=:
+
+ for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+ if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+ then
+ break
+ fi
+ prev="$cmd"
+ done
+
+ if test "$prev" != 'sed 50q "$0"'; then
+ echo_test_string=`eval $prev`
+ export echo_test_string
+ exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+ else
+ # Oops. We lost completely, so just stick with echo.
+ echo=echo
+ fi
+ fi
+ fi
+ fi
+fi
+fi
+
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+ ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+fi
+
+
+
+
+tagnames=${tagnames+${tagnames},}CXX
+
+tagnames=${tagnames+${tagnames},}F77
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='expat'
+PACKAGE_TARNAME='expat'
+PACKAGE_VERSION='2.0.1'
+PACKAGE_STRING='expat 2.0.1'
+PACKAGE_BUGREPORT='expat-bugs@libexpat.org'
+
+ac_unique_file="Makefile.in"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#if STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# if HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#if HAVE_STRING_H
+# if !STDC_HEADERS && HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#if HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#if HAVE_INTTYPES_H
+# include <inttypes.h>
+#else
+# if HAVE_STDINT_H
+# include <stdint.h>
+# endif
+#endif
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP DLLTOOL ac_ct_DLLTOOL AS ac_ct_AS OBJDUMP ac_ct_OBJDUMP CPP CXX CXXFLAGS ac_ct_CXX CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL LIBCURRENT LIBREVISION LIBAGE INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA FILEMAP LIBOBJS LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_option in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_$ac_feature='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_$ac_package='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
+ else
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
+ { (exit 1); exit 1; }; }
+ fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+ac_env_CPP_set=${CPP+set}
+ac_env_CPP_value=$CPP
+ac_cv_env_CPP_set=${CPP+set}
+ac_cv_env_CPP_value=$CPP
+ac_env_CXX_set=${CXX+set}
+ac_env_CXX_value=$CXX
+ac_cv_env_CXX_set=${CXX+set}
+ac_cv_env_CXX_value=$CXX
+ac_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_env_CXXFLAGS_value=$CXXFLAGS
+ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
+ac_cv_env_CXXFLAGS_value=$CXXFLAGS
+ac_env_CXXCPP_set=${CXXCPP+set}
+ac_env_CXXCPP_value=$CXXCPP
+ac_cv_env_CXXCPP_set=${CXXCPP+set}
+ac_cv_env_CXXCPP_value=$CXXCPP
+ac_env_F77_set=${F77+set}
+ac_env_F77_value=$F77
+ac_cv_env_F77_set=${F77+set}
+ac_cv_env_F77_value=$F77
+ac_env_FFLAGS_set=${FFLAGS+set}
+ac_env_FFLAGS_value=$FFLAGS
+ac_cv_env_FFLAGS_set=${FFLAGS+set}
+ac_cv_env_FFLAGS_value=$FFLAGS
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures expat 2.0.1 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of expat 2.0.1:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-shared[=PKGS]
+ build shared libraries [default=yes]
+ --enable-static[=PKGS]
+ build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-pic try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-tags[=TAGS]
+ include additional configurations [automatic]
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
+ headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ CXXCPP C++ preprocessor
+ F77 Fortran 77 compiler command
+ FFLAGS Fortran 77 compiler flags
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <expat-bugs@libexpat.org>.
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd $ac_popdir
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+expat configure 2.0.1
+generated by GNU Autoconf 2.59
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by expat $as_me 2.0.1, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ac_aux_dir=
+for ac_dir in conftools $srcdir/conftools; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in conftools $srcdir/conftools" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in conftools $srcdir/conftools" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+
+
+
+LIBCURRENT=6
+LIBREVISION=2
+LIBAGE=5
+
+ ac_config_headers="$ac_config_headers expat_config.h"
+
+
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+## Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005
+## Free Software Foundation, Inc.
+## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+##
+## This file is free software; the Free Software Foundation gives
+## unlimited permission to copy and/or distribute it, with or without
+## modifications, as long as this notice is preserved.
+
+# serial 48 AC_PROG_LIBTOOL
+
+
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If this macro is not defined by Autoconf, define it here.
+
+
+
+# AC_PROG_LIBTOOL
+# ---------------
+# AC_PROG_LIBTOOL
+
+
+# _AC_PROG_LIBTOOL
+# ----------------
+# _AC_PROG_LIBTOOL
+
+
+# AC_LIBTOOL_SETUP
+# ----------------
+# AC_LIBTOOL_SETUP
+
+
+# _LT_AC_SYS_COMPILER
+# -------------------
+# _LT_AC_SYS_COMPILER
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+# _LT_LINKER_BOILERPLATE
+
+
+# _LT_AC_SYS_LIBPATH_AIX
+# ----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# _LT_AC_SYS_LIBPATH_AIX
+
+
+# _LT_AC_SHELL_INIT(ARG)
+# ----------------------
+# _LT_AC_SHELL_INIT
+
+
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+# _LT_AC_PROG_ECHO_BACKSLASH
+
+
+# _LT_AC_LOCK
+# -----------
+# _LT_AC_LOCK
+
+
+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+# AC_LIBTOOL_COMPILER_OPTION
+
+
+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ------------------------------------------------------------
+# Check whether the given compiler option works
+# AC_LIBTOOL_LINKER_OPTION
+
+
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# --------------------------
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+
+
+# _LT_AC_CHECK_DLFCN
+# ------------------
+# _LT_AC_CHECK_DLFCN
+
+
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ---------------------------------------------------------------------
+# _LT_AC_TRY_DLOPEN_SELF
+
+
+# AC_LIBTOOL_DLOPEN_SELF
+# ----------------------
+# AC_LIBTOOL_DLOPEN_SELF
+
+
+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+# ---------------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler
+# AC_LIBTOOL_PROG_CC_C_O
+
+
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+# -----------------------------------------
+# Check to see if we can do hard links to lock some files if needed
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+
+
+# AC_LIBTOOL_OBJDIR
+# -----------------
+# AC_LIBTOOL_OBJDIR
+
+
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+# ----------------------------------------------
+# Check hardcoding attributes.
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+
+
+# AC_LIBTOOL_SYS_LIB_STRIP
+# ------------------------
+# AC_LIBTOOL_SYS_LIB_STRIP
+
+
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+
+
+# _LT_AC_TAGCONFIG
+# ----------------
+# _LT_AC_TAGCONFIG
+
+
+# AC_LIBTOOL_DLOPEN
+# -----------------
+# enable checks for dlopen support
+# AC_LIBTOOL_DLOPEN
+
+
+# AC_LIBTOOL_WIN32_DLL
+# --------------------
+# declare package support for building win32 DLLs
+# AC_LIBTOOL_WIN32_DLL
+
+
+# AC_ENABLE_SHARED([DEFAULT])
+# ---------------------------
+# implement the --enable-shared flag
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# AC_ENABLE_SHARED
+
+
+# AC_DISABLE_SHARED
+# -----------------
+# set the default shared flag to --disable-shared
+# AC_DISABLE_SHARED
+
+
+# AC_ENABLE_STATIC([DEFAULT])
+# ---------------------------
+# implement the --enable-static flag
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# AC_ENABLE_STATIC
+
+
+# AC_DISABLE_STATIC
+# -----------------
+# set the default static flag to --disable-static
+# AC_DISABLE_STATIC
+
+
+# AC_ENABLE_FAST_INSTALL([DEFAULT])
+# ---------------------------------
+# implement the --enable-fast-install flag
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# AC_ENABLE_FAST_INSTALL
+
+
+# AC_DISABLE_FAST_INSTALL
+# -----------------------
+# set the default to --disable-fast-install
+# AC_DISABLE_FAST_INSTALL
+
+
+# AC_LIBTOOL_PICMODE([MODE])
+# --------------------------
+# implement the --with-pic flag
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+# AC_LIBTOOL_PICMODE
+
+
+# AC_PROG_EGREP
+# -------------
+# This is predefined starting with Autoconf 2.54, so this conditional
+# definition can be removed once we require Autoconf 2.54 or later.
+
+
+
+# AC_PATH_TOOL_PREFIX
+# -------------------
+# find a file program which can recognise shared library
+# AC_PATH_TOOL_PREFIX
+
+
+# AC_PATH_MAGIC
+# -------------
+# find a file program which can recognise a shared library
+# AC_PATH_MAGIC
+
+
+# AC_PROG_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+# AC_PROG_LD
+
+
+# AC_PROG_LD_GNU
+# --------------
+# AC_PROG_LD_GNU
+
+
+# AC_PROG_LD_RELOAD_FLAG
+# ----------------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+# AC_PROG_LD_RELOAD_FLAG
+
+
+# AC_DEPLIBS_CHECK_METHOD
+# -----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+# AC_DEPLIBS_CHECK_METHOD
+
+
+# AC_PROG_NM
+# ----------
+# find the pathname to a BSD-compatible name lister
+# AC_PROG_NM
+
+
+# AC_CHECK_LIBM
+# -------------
+# check for math library
+# AC_CHECK_LIBM
+
+
+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments. Note that
+# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
+# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
+# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
+# (note the single quotes!). If your package is not flat and you're not
+# using automake, define top_builddir and top_srcdir appropriately in
+# the Makefiles.
+# AC_LIBLTDL_CONVENIENCE
+
+
+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl installable library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments. Note that
+# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
+# and an installed libltdl is not found, it is assumed to be `libltdl'.
+# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
+# '${top_srcdir}/' (note the single quotes!). If your package is not
+# flat and you're not using automake, define top_builddir and top_srcdir
+# appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+# AC_LIBLTDL_INSTALLABLE
+
+
+# AC_LIBTOOL_CXX
+# --------------
+# enable support for C++ libraries
+# AC_LIBTOOL_CXX
+
+
+# _LT_AC_LANG_CXX
+# ---------------
+# _LT_AC_LANG_CXX
+
+# _LT_AC_PROG_CXXCPP
+# ------------------
+# _LT_AC_PROG_CXXCPP
+
+# AC_LIBTOOL_F77
+# --------------
+# enable support for Fortran 77 libraries
+# AC_LIBTOOL_F77
+
+
+# _LT_AC_LANG_F77
+# ---------------
+# _LT_AC_LANG_F77
+
+
+# AC_LIBTOOL_GCJ
+# --------------
+# enable support for GCJ libraries
+# AC_LIBTOOL_GCJ
+
+
+# _LT_AC_LANG_GCJ
+# ---------------
+# _LT_AC_LANG_GCJ
+
+
+# AC_LIBTOOL_RC
+# -------------
+# enable support for Windows resource files
+# AC_LIBTOOL_RC
+
+
+# AC_LIBTOOL_LANG_C_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+
+# AC_LIBTOOL_LANG_C_CONFIG
+
+
+# AC_LIBTOOL_LANG_CXX_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+
+# AC_LIBTOOL_LANG_CXX_CONFIG
+
+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+# ------------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+# AC_LIBTOOL_POSTDEP_PREDEP
+
+# AC_LIBTOOL_LANG_F77_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+
+# AC_LIBTOOL_LANG_F77_CONFIG
+
+
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+
+
+# AC_LIBTOOL_LANG_RC_CONFIG
+# -------------------------
+# Ensure that the configuration vars for the Windows resource compiler are
+# suitably defined. Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+
+# AC_LIBTOOL_LANG_RC_CONFIG
+
+
+# AC_LIBTOOL_CONFIG([TAGNAME])
+# ----------------------------
+# If TAGNAME is not passed, then create an initial libtool script
+# with a default configuration from the untagged config vars. Otherwise
+# add code to config.status for appending the configuration named by
+# TAGNAME from the matching tagged config vars.
+# AC_LIBTOOL_CONFIG
+
+
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------------------
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+
+
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+ # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+
+
+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
+# ---------------------------------------
+
+
+
+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+# ------------------------------------
+# See if the linker supports building shared libraries.
+# AC_LIBTOOL_PROG_LD_SHLIBS
+
+
+# _LT_AC_FILE_LTDLL_C
+# -------------------
+# Be careful that the start marker always follows a newline.
+# _LT_AC_FILE_LTDLL_C
+
+
+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# ---------------------------------
+
+
+
+# old names
+
+
+
+
+
+
+
+
+# This is just to silence aclocal about the macro not being used
+
+
+
+
+
+
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+
+
+
+
+
+
+
+# Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_shared=yes
+fi;
+
+# Check whether --enable-static or --disable-static was given.
+if test "${enable_static+set}" = set; then
+ enableval="$enable_static"
+ p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_static=yes
+fi;
+
+# Check whether --enable-fast-install or --disable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then
+ enableval="$enable_fast_install"
+ p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi;
+
+# Make sure we can run config.sub.
+$ac_config_sub sun4 >/dev/null 2>&1 ||
+ { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
+echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+ { (exit 1); exit 1; }; }
+
+echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6
+if test "${ac_cv_build+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_build_alias=$build_alias
+test -z "$ac_cv_build_alias" &&
+ ac_cv_build_alias=`$ac_config_guess`
+test -z "$ac_cv_build_alias" &&
+ { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
+echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
+ { (exit 1); exit 1; }; }
+ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6
+build=$ac_cv_build
+build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6
+if test "${ac_cv_host+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_host_alias=$host_alias
+test -z "$ac_cv_host_alias" &&
+ ac_cv_host_alias=$ac_cv_build_alias
+ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
+ { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
+echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+ { (exit 1); exit 1; }; }
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6
+host=$ac_cv_host
+host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CC" && break
+done
+
+ CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std1 is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std1. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
+if test "${lt_cv_path_SED+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+
+fi
+
+SED=$lt_cv_path_SED
+echo "$as_me:$LINENO: result: $SED" >&5
+echo "${ECHO_T}$SED" >&6
+
+echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6
+if test "${ac_cv_prog_egrep+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+ then ac_cv_prog_egrep='grep -E'
+ else ac_cv_prog_egrep='egrep'
+ fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
+echo "${ECHO_T}$ac_cv_prog_egrep" >&6
+ EGREP=$ac_cv_prog_egrep
+
+
+
+# Check whether --with-gnu-ld or --without-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then
+ withval="$with_gnu_ld"
+ test "$withval" = no || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi;
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+else
+ echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+fi
+if test "${lt_cv_path_LD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
+echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
+ { (exit 1); exit 1; }; }
+echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+if test "${lt_cv_prog_gnu_ld+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+if test "${lt_cv_ld_reload_flag+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+if test "${lt_cv_path_NM+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi
+fi
+echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+echo "${ECHO_T}$lt_cv_path_NM" >&6
+NM="$lt_cv_path_NM"
+
+echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+ echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6
+fi
+
+echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
+echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
+if test "${lt_cv_deplibs_check_method+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix4* | aix5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump'.
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | kfreebsd*-gnu | dragonfly*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix3*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+nto-qnx*)
+ lt_cv_deplibs_check_method=unknown
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '#line 3564 "configure"' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+if test "${lt_cv_cc_needs_belf+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ lt_cv_cc_needs_belf=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+lt_cv_cc_needs_belf=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+sparc*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*) LD="${LD-ld} -m elf64_sparc" ;;
+ *) LD="${LD-ld} -64" ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ echo "$as_me:$LINENO: result: $DLLTOOL" >&5
+echo "${ECHO_T}$DLLTOOL" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_DLLTOOL" && ac_cv_prog_ac_ct_DLLTOOL="false"
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
+echo "${ECHO_T}$ac_ct_DLLTOOL" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ DLLTOOL=$ac_ct_DLLTOOL
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ echo "$as_me:$LINENO: result: $AS" >&5
+echo "${ECHO_T}$AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+ ac_ct_AS=$AS
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AS"; then
+ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AS="as"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_AS" && ac_cv_prog_ac_ct_AS="false"
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+ echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
+echo "${ECHO_T}$ac_ct_AS" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ AS=$ac_ct_AS
+else
+ AS="$ac_cv_prog_AS"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ echo "$as_me:$LINENO: result: $OBJDUMP" >&5
+echo "${ECHO_T}$OBJDUMP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_OBJDUMP" && ac_cv_prog_ac_ct_OBJDUMP="false"
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
+echo "${ECHO_T}$ac_ct_OBJDUMP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ OBJDUMP=$ac_ct_OBJDUMP
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+ ;;
+
+esac
+
+need_locks="$enable_libtool_lock"
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if test "${ac_cv_prog_CPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+if test "${ac_cv_header_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_header_stdc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_header_stdc=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then
+ :
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then
+ :
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ctype.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ exit(2);
+ exit (0);
+}
+_ACEOF
+rm -f conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: program exited with status $ac_status" >&5
+echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+( exit $ac_status )
+ac_cv_header_stdc=no
+fi
+rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+fi
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6
+if test $ac_cv_header_stdc = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define STDC_HEADERS 1
+_ACEOF
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+
+
+
+
+
+
+
+
+
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ eval "$as_ac_Header=yes"
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+eval "$as_ac_Header=no"
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+
+for ac_header in dlfcn.h
+do
+as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+else
+ # Is the header compilable?
+echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_includes_default
+#include <$ac_header>
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_header_compiler=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_header_compiler=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6
+
+# Is the header present?
+echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <$ac_header>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_c_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_c_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ ac_header_preproc=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6
+
+# So? What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
+ yes:no: )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
+echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
+ ac_header_preproc=yes
+ ;;
+ no:yes:* )
+ { echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
+echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: check for missing prerequisite headers?" >&5
+echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
+echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
+echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
+echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
+ { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
+echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
+ (
+ cat <<\_ASBOX
+## -------------------------------------- ##
+## Report this to expat-bugs@libexpat.org ##
+## -------------------------------------- ##
+_ASBOX
+ ) |
+ sed "s/^/$as_me: WARNING: /" >&2
+ ;;
+esac
+echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
+if eval "test \"\${$as_ac_Header+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ eval "$as_ac_Header=\$ac_header_preproc"
+fi
+echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
+echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+
+fi
+if test `eval echo '${'$as_ac_Header'}'` = yes; then
+ cat >>confdefs.h <<_ACEOF
+#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CXX"; then
+ ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+ echo "$as_me:$LINENO: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CXX" && break
+ done
+fi
+if test -z "$CXX"; then
+ ac_ct_CXX=$CXX
+ for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CXX"; then
+ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CXX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+echo "${ECHO_T}$ac_ct_CXX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CXX" && break
+done
+test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
+
+ CXX=$ac_ct_CXX
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C++ compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
+GXX=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+CXXFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cxx_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cxx_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cxx_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
+if test "$ac_test_CXXFLAGS" = set; then
+ CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+ if test "$GXX" = yes; then
+ CXXFLAGS="-g -O2"
+ else
+ CXXFLAGS="-g"
+ fi
+else
+ if test "$GXX" = yes; then
+ CXXFLAGS="-O2"
+ else
+ CXXFLAGS=
+ fi
+fi
+for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_cxx_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+
+
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6
+if test -z "$CXXCPP"; then
+ if test "${ac_cv_prog_CXXCPP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # Double quotes because CXXCPP needs to be expanded
+ for CXXCPP in "$CXX -E" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ break
+fi
+
+ done
+ ac_cv_prog_CXXCPP=$CXXCPP
+
+fi
+ CXXCPP=$ac_cv_prog_CXXCPP
+else
+ ac_cv_prog_CXXCPP=$CXXCPP
+fi
+echo "$as_me:$LINENO: result: $CXXCPP" >&5
+echo "${ECHO_T}$CXXCPP" >&6
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether non-existent headers
+ # can be detected and how.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
+ (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } >/dev/null; then
+ if test -s conftest.err; then
+ ac_cpp_err=$ac_cxx_preproc_warn_flag
+ ac_cpp_err=$ac_cpp_err$ac_cxx_werror_flag
+ else
+ ac_cpp_err=
+ fi
+else
+ ac_cpp_err=yes
+fi
+if test -z "$ac_cpp_err"; then
+ # Broken: success on invalid input.
+continue
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then
+ :
+else
+ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&5
+echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=cc
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+
+fi
+
+
+ac_ext=f
+ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
+ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_f77_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_F77+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$F77"; then
+ ac_cv_prog_F77="$F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+F77=$ac_cv_prog_F77
+if test -n "$F77"; then
+ echo "$as_me:$LINENO: result: $F77" >&5
+echo "${ECHO_T}$F77" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$F77" && break
+ done
+fi
+if test -z "$F77"; then
+ ac_ct_F77=$F77
+ for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_F77"; then
+ ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_F77="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_F77=$ac_cv_prog_ac_ct_F77
+if test -n "$ac_ct_F77"; then
+ echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
+echo "${ECHO_T}$ac_ct_F77" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_F77" && break
+done
+
+ F77=$ac_ct_F77
+fi
+
+
+# Provide some information about the compiler.
+echo "$as_me:5296:" \
+ "checking for Fortran 77 compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+rm -f a.out
+
+# If we don't use `.F' as extension, the preprocessor is not run on the
+# input file. (Note that this only needs to work for GNU compilers.)
+ac_save_ext=$ac_ext
+ac_ext=F
+echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6
+if test "${ac_cv_f77_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+ program main
+#ifndef __GNUC__
+ choke me
+#endif
+
+ end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_f77_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_f77_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6
+ac_ext=$ac_save_ext
+ac_test_FFLAGS=${FFLAGS+set}
+ac_save_FFLAGS=$FFLAGS
+FFLAGS=
+echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_f77_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ FFLAGS=-g
+cat >conftest.$ac_ext <<_ACEOF
+ program main
+
+ end
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_f77_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_f77_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_f77_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6
+if test "$ac_test_FFLAGS" = set; then
+ FFLAGS=$ac_save_FFLAGS
+elif test $ac_cv_prog_f77_g = yes; then
+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+ FFLAGS="-g -O2"
+ else
+ FFLAGS="-g"
+ fi
+else
+ if test "x$ac_cv_f77_compiler_gnu" = xyes; then
+ FFLAGS="-O2"
+ else
+ FFLAGS=
+ fi
+fi
+
+G77=`test $ac_compiler_gnu = yes && echo yes`
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# find the maximum length of command line arguments
+echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+ = "XX$teststring") >/dev/null 2>&1 &&
+ new_result=`expr "X$teststring" : ".*" 2>&1` &&
+ lt_cv_sys_max_cmd_len=$new_result &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on massive
+ # amounts of additional arguments before passing them to the linker.
+ # It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ ;;
+ esac
+
+fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+ echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+else
+ echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6
+fi
+
+
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*) # Its linker distinguishes data from code symbols
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDEGRST]'
+ fi
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+ ;;
+linux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[ABCDGIRSTW]'
+ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
+ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if grep ' nm_test_var$' "$nlist" >/dev/null; then
+ if grep ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+
+ cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+const struct {
+ const char *name;
+ lt_ptr_t address;
+}
+lt_preloaded_symbols[] =
+{
+EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+ cat <<\EOF >> conftest.$ac_ext
+ {0, (lt_ptr_t) 0}
+};
+
+#ifdef __cplusplus
+}
+#endif
+EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_save_LIBS="$LIBS"
+ lt_save_CFLAGS="$CFLAGS"
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS="$lt_save_LIBS"
+ CFLAGS="$lt_save_CFLAGS"
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -f conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6
+else
+ echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6
+fi
+
+echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+if test "${lt_cv_objdir+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+echo "${ECHO_T}$lt_cv_objdir" >&6
+objdir=$lt_cv_objdir
+
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e 1s/^X//'
+sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+# Constants:
+rm="rm -f"
+
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_AR"; then
+ ac_ct_AR=$AR
+ # Extract the first word of "ar", so it can be a program name with args.
+set dummy ar; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="ar"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ AR=$ac_ct_AR
+else
+ AR="$ac_cv_prog_AR"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ RANLIB=$ac_ct_RANLIB
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ STRIP=$ac_ct_STRIP
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+
+for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+enable_dlopen=no
+enable_win32_dll=yes
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
+
+fi;
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi;
+test -z "$pic_mode" && pic_mode=default
+
+# Use C for the default configuration in the libtool script
+tagname=
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$rm conftest*
+
+ac_outfile=conftest.$ac_objext
+printf "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$rm conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+
+lt_prog_compiler_no_builtin_flag=
+
+if test "$GCC" = yes; then
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:6363: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:6367: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+
+ if test "$GCC" = yes; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+
+ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ interix3*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ hpux*)
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ darwin*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ case $cc_basename in
+ xlc*)
+ lt_prog_compiler_pic='-qnocommon'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ esac
+ ;;
+
+ mingw* | pw32* | os2*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ linux*)
+ case $cc_basename in
+ icc* | ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ esac
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic" >&6
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+
+echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
+if test "${lt_prog_compiler_pic_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:6631: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:6635: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_prog_compiler_pic_works=yes
+ fi
+ fi
+ $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
+
+if test x"$lt_prog_compiler_pic_works" = xyes; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+if test "${lt_prog_compiler_static_works+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_prog_compiler_static_works=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ printf "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_prog_compiler_static_works=yes
+ fi
+ else
+ lt_prog_compiler_static_works=yes
+ fi
+ fi
+ $rm conftest*
+ LDFLAGS="$save_LDFLAGS"
+
+fi
+echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
+
+if test x"$lt_prog_compiler_static_works" = xyes; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $rm -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:6735: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:6739: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $rm conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+ $rm out/* && rmdir out
+ cd ..
+ rmdir conftest
+ $rm conftest*
+
+fi
+echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+ hard_links=yes
+ $rm conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6
+ if test "$hard_links" = no; then
+ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+
+ runpath_var=
+ allow_undefined_flag=
+ enable_shared_with_static_runtimes=no
+ archive_cmds=
+ archive_expsym_cmds=
+ old_archive_From_new_cmds=
+ old_archive_from_expsyms_cmds=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ thread_safe_flag_spec=
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_flag_spec_ld=
+ hardcode_libdir_separator=
+ hardcode_direct=no
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ link_all_deplibs=unknown
+ hardcode_automatic=no
+ module_cmds=
+ module_expsym_cmds=
+ always_export_symbols=no
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ extract_expsyms_cmds=
+ # Just being paranoid about ensuring that cc_basename is set.
+ for cc_temp in $compiler""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+
+ case $host_os in
+ cygwin* | mingw* | pw32*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+ if test "$with_gnu_ld" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
+ export_dynamic_flag_spec='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>/dev/null` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix3* | aix4* | aix5*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+
+EOF
+ fi
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+
+ # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+ # that the semantics of dynamic libraries on AmigaOS, at least up
+ # to version 4, is to share data among multiple programs linked
+ # with the same dynamic library. Since this doesn't match the
+ # behavior of shared libraries on other platforms, we can't use
+ # them.
+ ld_shlibs=no
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
+
+ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ interix3*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ linux*)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ tmp_addflag=
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ esac
+ archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test $supports_anon_versioning = yes; then
+ archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ $echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+EOF
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test "$ld_shlibs" = no; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix4* | aix5*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" && \
+ strings "$collect2name" | grep resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ hardcode_direct=yes
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an empty executable.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an empty executable.
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
+}'`; fi
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+
+ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' ${wl}-bernotok'
+ allow_undefined_flag=' ${wl}-berok'
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ archive_cmds_need_lc=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ # see comment about different semantics on the GNU ld section
+ ld_shlibs=no
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_From_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
+ fix_srcfile_path='`cygpath -w "$srcfile"`'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ darwin* | rhapsody*)
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ allow_undefined_flag='${wl}-undefined ${wl}suppress'
+ ;;
+ *) # Darwin 1.3 on
+ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+ else
+ case ${MACOSX_DEPLOYMENT_TARGET} in
+ 10.[012])
+ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
+ ;;
+ 10.*)
+ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ whole_archive_flag_spec=''
+ link_all_deplibs=yes
+ if test "$GCC" = yes ; then
+ output_verbose_link_cmd='echo'
+ archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ else
+ case $cc_basename in
+ xlc*)
+ output_verbose_link_cmd='echo'
+ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
+ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ ;;
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ freebsd1*)
+ ld_shlibs=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | kfreebsd*-gnu | dragonfly*)
+ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ hardcode_direct=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_libdir_flag_spec_ld='+b $libdir'
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ export_dynamic_flag_spec='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec_ld='-rpath $libdir'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ link_all_deplibs=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ openbsd*)
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ export_dynamic_flag_spec='${wl}-E'
+ else
+ case $host_os in
+ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z text'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+ else
+ wlarc=''
+ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine linker options so we
+ # cannot just pass the convience library names through
+ # without $wl, iff we do not link with $LD.
+ # Luckily, gcc supports the same syntax we need for Sun Studio.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ case $wlarc in
+ '')
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
+ *)
+ whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;;
+ esac ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*)
+ no_undefined_flag='${wl}-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='${wl}-z,text'
+ allow_undefined_flag='${wl}-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+ fi
+
+echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6
+test "$ld_shlibs" = no && can_build_shared=no
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+ $rm conftest*
+ printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
+ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ then
+ archive_cmds_need_lc=no
+ else
+ archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $rm conftest*
+ echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+echo "${ECHO_T}$archive_cmds_need_lc" >&6
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix4* | aix5*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$host_os in
+ yes,cygwin* | yes,mingw* | yes,pw32*)
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $rm \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+ ;;
+ mingw*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH printed by
+ # mingw gcc, but we are running on Cygwin. Gcc prints its search
+ # path with ; separators, and with drive letters. We can handle the
+ # drive letters (cygwin fileutils understands them), so leave them,
+ # especially as we might pass files found there to a mingw objdump,
+ # which wouldn't understand a cygwinified path. Ahh.
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ ;;
+
+ *)
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+ if test "$GCC" = yes; then
+ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+ else
+ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+ fi
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd1*)
+ dynamic_linker=no
+ ;;
+
+kfreebsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[123]*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ freebsd*) # from 4.6 on
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555.
+ postinstall_cmds='chmod 555 $lib'
+ ;;
+
+interix3*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be Linux ELF.
+linux*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+knetbsd*-gnu)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='GNU ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+nto-qnx*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[89] | openbsd2.[89].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+solaris*)
+ version_type=linux
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ export_dynamic_flag_spec='${wl}-Blargedynsym'
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ shlibpath_overrides_runpath=no
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ shlibpath_overrides_runpath=yes
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+uts4*)
+ version_type=linux
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" || \
+ test -n "$runpath_var" || \
+ test "X$hardcode_automatic" = "Xyes" ; then
+
+ # We can hardcode non-existant directories.
+ if test "$hardcode_direct" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
+ test "$hardcode_minus_L" != no; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6
+
+if test "$hardcode_action" = relink; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+striplib=
+old_striplib=
+echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+ ;;
+ *)
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ ;;
+ esac
+fi
+
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dl_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ *)
+ echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+if test "${ac_cv_func_shl_load+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define shl_load innocuous_shl_load
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char shl_load (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef shl_load
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shl_load ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_shl_load) || defined (__stub___shl_load)
+choke me
+#else
+char (*f) () = shl_load;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != shl_load;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_shl_load=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+if test $ac_cv_func_shl_load = yes; then
+ lt_cv_dlopen="shl_load"
+else
+ echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char shl_load ();
+int
+main ()
+{
+shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dld_shl_load=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_shl_load=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+if test $ac_cv_lib_dld_shl_load = yes; then
+ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+else
+ echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+if test "${ac_cv_func_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define dlopen innocuous_dlopen
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char dlopen (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef dlopen
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_dlopen) || defined (__stub___dlopen)
+choke me
+#else
+char (*f) () = dlopen;
+#endif
+#ifdef __cplusplus
+}
+#endif
+
+int
+main ()
+{
+return f != dlopen;
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_func_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_func_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+if test $ac_cv_func_dlopen = yes; then
+ lt_cv_dlopen="dlopen"
+else
+ echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dl_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dl_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+if test $ac_cv_lib_dl_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+ echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen ();
+int
+main ()
+{
+dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_svld_dlopen=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_svld_dlopen=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+if test $ac_cv_lib_svld_dlopen = yes; then
+ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+ echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dld_link ();
+int
+main ()
+{
+dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_dld_dld_link=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_dld_dld_link=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+if test $ac_cv_lib_dld_dld_link = yes; then
+ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+if test "${lt_cv_dlopen_self+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test "$cross_compiling" = yes; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<EOF
+#line 9080 "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# e